Titanium exhibits outstanding properties,particularly,high specific strength and resistance to both high and low temperatures,earning it a reputation as the metal of the future.However,because of the highly reactive n...Titanium exhibits outstanding properties,particularly,high specific strength and resistance to both high and low temperatures,earning it a reputation as the metal of the future.However,because of the highly reactive nature of titanium,metallic titanium production involves extensive procedures and high costs.Considering its advantages and limitations,the European Union has classified titanium metal as a critical raw material(CRM)of low category.The Kroll process is predominantly used to produce titanium;however,molten salt electrolysis(MSE)is currently being explored for producing metallic titanium at a low cost.Since 2000,electrolytic titanium production has undergone a wave of technological advancements.However,because of the intermediate and disproportionation reactions in the electrolytic titanium production process,the process efficiency and titanium purity according to industrial standards could not be achieved.Consequently,metallic titanium production has gradually diversified into employing technologies such as thermal reduction,MSE,and titanium alloy preparation.This study provides a comprehensive review of research advances in titanium metal preparation technologies over the past two decades,highlighting the challenges faced by the existing methods and proposing potential solutions.It offers useful insights into the development of low-cost titanium preparation technologies.展开更多
The direct transformation of dinitrogen(N_(2)) into nitrogen-containing organic compounds holds substantial importance.In this work,we report a titanium-promoted method for the conversion of N_(2) to N-methylimides.In...The direct transformation of dinitrogen(N_(2)) into nitrogen-containing organic compounds holds substantial importance.In this work,we report a titanium-promoted method for the conversion of N_(2) to N-methylimides.Initially,the N_(2)-bridging end-on dititanium side-on dipotassium complex[{(Tren^(TMS))Ti}_(2)(μ-η^(1):η^(1):η^(2):η^(2)-N_(2)K_(2))] underwent simultaneous disproportionation and N-methylation reactions in the presence of methyl trifluoromethanesulfonate(Me OTf),yielding [{(N^(Me,TMS)NN^(TMS)_(2))Ti}(μ-NMe)]_(2) with complete cleavage of the N≡N bond.The nucleophilicity of the N-methylated intermediate allowed it to react with electrophilic reagents such as trimethylchlorosilane(TMSCl) to form heptamethyldisilazane,or with acyl chlorides to generate N-methylimides.Moreover,nitrogen-15(^(15)N) labeled experiments provided a novel approach to synthesizing ^(15)N-labeled methylimides.展开更多
Ti-5Al-5Mo-5Cr-2Zr-xNb with different Nb(abbreviated as Ti-5552-xNb,x=3,6,9,12,wt.%)contents were stretched at 923 K to study their superplastic behavior and mechanical properties below recrystallization temperature.T...Ti-5Al-5Mo-5Cr-2Zr-xNb with different Nb(abbreviated as Ti-5552-xNb,x=3,6,9,12,wt.%)contents were stretched at 923 K to study their superplastic behavior and mechanical properties below recrystallization temperature.The microstructure of as-cast Ti-5552-xNb alloy is consisted of a singleβphase,and theβgrain size increases slightly with the increase of Nb content.The thermal effect in the process of high temperature drawing leads to the precipitation ofαphase.The addition of Nb in Ti-5552 titanium alloys reduces theα/βphase transformation temperature,which causes a decrease in the volume fraction ofαphase.Reducing theαphase content reduces incompatibility,but too low a proportion ofαphase will lead to premature fracture,so tensile strength and plasticity firstly increase and then decrease.The results show that Ti-5552-9Nb titanium alloy shows the best tensile strength(307.2 MPa)and superplasticity(106%).The superplastic mechanism of Ti-5552-9Nb alloy is mainly caused by relative sliding ofβgrain boundaries and dislocation movement.展开更多
During electrochemical machining(ECM),the passivation film formed on the surface of titanium alloy can lead to uneven dissolution and pitting.Solid particle erosion can effectively remove this passivation film.In this...During electrochemical machining(ECM),the passivation film formed on the surface of titanium alloy can lead to uneven dissolution and pitting.Solid particle erosion can effectively remove this passivation film.In this paper,the electrochemical dissolution behavior of Ti-6.5Al-2Zr-1Mo-1V(TA15)titanium alloy at without particle impact,low(15°)and high(90°)angle particle impact was investigated,and the influence of Al_(2)O_(3)particles on ECM was systematically expounded.It was found that under the condition of no particle erosion,the surface of electrochemically processed titanium alloy had serious pitting corrosion due to the influence of the passivation film,and the surface roughness(Sa)of the local area reached 10.088μm.Under the condition of a high-impact angle(90°),due to the existence of strain hardening and particle embedding,only the edge of the surface is dissolved,while the central area is almost insoluble,with the surface roughness(S_(a))reaching 16.086μm.On the contrary,under the condition of a low-impact angle(15°),the machining efficiency and surface quality of the material were significantly improved due to the ploughing effect and galvanic corrosion,and the surface roughness(S_(a))reached 2.823μm.Based on these findings,the electrochemical dissolution model of TA15 titanium alloy under different particle erosion conditions was established.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmenta...Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmental level of the titanium industry are important indexes of a country’s comprehensive power.However,at present,the application amount and level of high-end titanium materials in China are limited by many factors,including the dependence of raw materials on imports,high processing cost,and structural imbalance of products.Based on the characteristics of titanium resources and the current situation of the titanium industry,the whole titanium industrial chain in China should be updated.Improving the quality of raw materials is important to produce low-cost,high-end titanium materials using titanium resources with high calcium and magnesium contents in the Panxi region.In addition,the steel-titanium joint production is a vital step to reduce the processing cost of titanium materials.Moreover,the consumption structure of titanium materials should be completed to expand their application.Gradually implementing these suggestions,the overall level of China’s titanium industry will be greatly improved,thereby rapidly establishing an advanced scientific and technological country.展开更多
As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven si...As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven size distribution.Through electron backscattered diffraction(EBSD),the forged microstructure at various locations of as-forged WSTi6421 titanium alloy billet was analyzed,revealing that the strength of theβphase cubic texture generated by forging significantly influences the grain size afterβannealing.Heat treatment experiments were conducted within the temperature range from T_(β)−50°C to T_(β)+10°C to observe the macro-and micro-morphologies.Results show that the cubic texture ofβphase caused by forging impacts the texture of the secondaryαphase,which subsequently influences theβphase formed during the post-βannealing process.Moreover,the pinning effect of the residual primaryαphase plays a crucial role in the growth ofβgrains during theβannealing process.EBSD analysis results suggest that the strength ofβphase with cubic texture formed during forging process impacts the orientation distribution differences ofβgrains afterβannealing.Additionally,the development of grains with large orientations within the cubic texture shows a certain degree of selectivity duringβannealing,which is affected by various factors,including the pinning effect of the primaryαphase,the strength of the matrix cubic texture,and the orientation relationship betweenβgrain and matrix.Comprehensively,the stronger the texture in a certain region,the less likely the large misoriented grains suffering secondary growth,thereby aggregating the difference in microstructure and grain orientation distribution across different regions afterβannealing.展开更多
Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other...Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.展开更多
The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and med...The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and medical sectors.However,conventional machining of titanium alloys leads to elevated tool wear,development of surface defects,and reduced machining efficiency due to their low heat conductivity,and chemical affinity.These issues can be somewhat counteracted by integrating ultrasonic vibration in the conventional machining of titanium alloys and also enhance sustainability.This review article offers a holistic evaluation of the influence of ultrasonic vibration-assisted milling and turning on cutting forces,temperature,tool wear,and surface integrity,encompassing surface morphology,surface roughness,surface residual stress,surface hardness,and surface tribological properties during titanium alloys machining.Furthermore,it investigates the sustainability aspect that has not been previously examined.Studies on the performance of ultrasonic-assisted cutting revealed several advantages,including decreased cutting forces and cutting temperature,improved tool life,and a better-machined surface during machining.Consequently,the sustainability factor is improved due to minimized energy consumption and residual waste.In conclusion,the key challenges and future prospects in the ultrasonic-assisted cutting of titanium alloys are also discussed.This review article provides beneficial knowledge for manufactur-ers and researchers regarding ultrasonic vibration-assisted cutting of titanium alloy and will play an important role in achieving sustainability in the industry.展开更多
Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional ...Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional surface strengthening technologies,laser shock peening(LSP)has increasingly attracted attention from researchers and industries,since it significantly improves the surface strength,biocompatibility,fa-tigue resistance,and anti-corrosion ability of Ti and its alloys.Despite numerous studies that have been carried out to elucidate the effects of LSP on microstructural evolution and mechanical properties of Ti and its alloys in recent years,a comprehensive review of recent advancements in the field of Ti and its alloys subjected to LSP is still lacking.In this review,the standard LSP and the novel process designs of LSP assisted by thermal,cryogenic,electropulsing and magnetic fields are discussed and compared.Microstructural evolution,with focuses on the dislocation dynamics,deformation twinning,grain refine-ment and surface amorphization,during LSP processing of Ti alloys is reviewed.Furthermore,the en-hanced engineering performance of the L SP-processed(L SPed)Ti alloys,including surface hardness,wear resistance,fatigue life and corrosion resistance are summarized.Finally,this review concludes by present-ing an overview of the current challenges encountered in this field and offering insights into anticipated future trends.展开更多
Titanium alloys engineered in structural applications achieve ultrahigh strength primarily through precipitation strengthening of secondary α-phase(αs)during aging,while they often experience compromised ductility a...Titanium alloys engineered in structural applications achieve ultrahigh strength primarily through precipitation strengthening of secondary α-phase(αs)during aging,while they often experience compromised ductility and toughness due to traditional strength-toughness tradeoff.In this study,we propose a novel strategy to address this conflict by introducing deformation kinks prior to conventional cold rolling(CR)and aging processes.These kinks are produced by cold forging(CF)to create macroscopic lamellar structures in β-grains,which alter strain partitioning during subsequent CR and ultimately tailor α_(s)-precipitation upon aging.As a result,an ultrafine duplex(αe+β)-structure is formed within kink interi-ors,while hierarchicalαs-precipitates are generated in the external β-matrix.This unique microstructure effectively enhances dislocation activity,promotes uniform plastic strain distribution and impedes crack propagation.Consequently,a simple Ti-V binary titanium alloy exhibits exceptional properties with ultra-high strength∼1636 MPa,decent ductility∼5.4% and appreciable fracture toughness∼36.1 MPa m^(1/2).The synergetic properties surpass those obtained through traditional CR and aging processes for the alloy and even outperform numerous multielement engineering titanium alloys reported in literature.Our findings open up a new avenue for overcoming the strength-toughness tradeoffof ultrahigh-strength titanium alloys,and also offer a facile production route towards structural materials for advanced performance.展开更多
Sodium-ion batteries(SIBs)hold great promise for large-scale energy storage in the post-lithium-ion battery era due to their high rate performance and long lifespan,although their sluggish Na^(+) transformation kineti...Sodium-ion batteries(SIBs)hold great promise for large-scale energy storage in the post-lithium-ion battery era due to their high rate performance and long lifespan,although their sluggish Na^(+) transformation kinetics still require improvement.Encouraged by the excellent electrochemical performance of titanium-based anode materials,here,we present a novel titanium vanadate@carbon(TVO@C)material as anode for SIBs.Our TVO@C material is synthesized via a facile coprecipitation method,with the following annealing process in an acetylene atomosphere.The opened ion channel and the oxygen vacancies within TVO@C facilitate the diffusion of Na^(+) ions,reducing their diffusion barrier.Thus,an ultrahigh rate of 100 A g^(-1)and long life of 10,000 cycles have been achieved.Furthermore,the TVO@C electrode exhibits stable performance,not only at room temperature,but also at temperatures as low as 20 C.The TVO@CjjNa_(3)V_(2)(PO_(4))_(3)@C full cells have also achieved stable discharge/charge for 500 cycles.It is believed that this strategy provides new insight into the development of advanced electrodes and provides a new opportunity for constructing novel high rate electrodes.展开更多
Crack initiation mechanism of dwell fatigue has always been a key problem in rationalizing the dwell effect,and it is not completely understood yet.This study conducted stress-controlled low-cycle fatigue and dwell fa...Crack initiation mechanism of dwell fatigue has always been a key problem in rationalizing the dwell effect,and it is not completely understood yet.This study conducted stress-controlled low-cycle fatigue and dwell fatigue tests on Ti-6Al-3Nb-2Zr-1Mo alloy with bimodal microstructure to reveal its microstructural characteristics and crack initiation mechanisms.The study demonstrated that the faceted primaryα nodules located near the specimen surface acted as crack initiation sites during both fatigue and dwell fatigue tests.Slip trace analysis revealed that faceted cracking occurred at(0001)basal plane with the maximum Schmid factor value through a special cracking mode referred to as(0001)twist boundary cracking.Innovative criteria of parameters C1 and C2 were proposed based on experimental observation and molecular dynamics simulations,which well identify candidates for(0001)twist boundary crack nucleation.It demonstrated that grain pairs combining a moderately high Schmid factor for basal slip and a well-orientated Burgers vector in the out-of-surface plane was the preferable location for surface(0001)twist-boundary crack initiation,and grain pairs combining a high Schmid factor for basal slip and a high normal stress on basal plane are perfect candidates for subsurface cracking.Based on this,phenomeno-logical models are proposed to explain the surface(0001)twist-boundary cracking mechanism from the perspective of surface extrusion-intrusion-induced micro-notches.展开更多
To recover the valuable elements in Bayan Obo tailings,Fe-Si bath smelting reduction was adopted to separate and enrich rare earth elements(REE),niobium and titanium from the REE-Nb-Ti-containing slag.The reduction re...To recover the valuable elements in Bayan Obo tailings,Fe-Si bath smelting reduction was adopted to separate and enrich rare earth elements(REE),niobium and titanium from the REE-Nb-Ti-containing slag.The reduction reaction process of the Fe-Si bath and the migration behavior of valuable elements in the solidification and crystallization process of silicothermic reduction tailings were investigated,and a treatment method for efficiently separating and enriching REE,Nb and Ti was explored.Thermodynamic analysis indicated that at 1600℃,with a 6 wt.%addition of Si as the reducing agent,the niobium oxide in the REE-Nb-Ti-containing slag could be selectively reduced to metallic Nb.In the Fe-Si bath reduction process,the Nb mass fraction in the metal phase increased with prolonged reaction time,peaking at 2.77%,while the Ti mass fraction consistently stayed below 0.12%.Lowering the w(CaO)/w(SiO_(2))enhanced the migration of Nb from slag to metal phase and reduced the Ti impurities.During solidification and crystallization,a significant quantity of perovskite precipitated from reduction tailings,with the REE dissolving into this perovskite.By adjusting the w(CaO)/w(SiO_(2))in tailings to 1.2-1.9 and maintaining a temperature of 1100℃for 4 h,the perovskite area fraction in the final slag could exceed 37%.Finally,a method was proposed to separate and enrich valuable elements in REE-Nb-Ti-containing slags via Fe-Si bath smelting reduction and crystallization control.展开更多
Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising techn...Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.展开更多
Achieving the simultaneous enhancement of strength and ductility in laser powder bed fused (LPBF-ed) titanium (Ti) is challenging due to the complex, high-dimensional parameter space and interactions between parameter...Achieving the simultaneous enhancement of strength and ductility in laser powder bed fused (LPBF-ed) titanium (Ti) is challenging due to the complex, high-dimensional parameter space and interactions between parameters and powders. Herein, a hybrid intelligent framework for process parameter optimization of LPBF-ed Ti with improved ultimate tensile strength (UTS) and elongation (EL) was proposed. It combines the data augmentation method (AVG ± EC × SD), the multi-model fusion stacking ensemble learning model (GBDT-BPNN-XGBoost), the interpretable machine learning method and the non-dominated ranking genetic algorithm (NSGA-Ⅱ). The GBDT-BPNN-XGBoost outperforms single models in predicting UTS and EL across the accuracy, generalization ability and stability. The SHAP analysis reveals that laser power (P) is the most important feature affecting both UTS and EL, and it has a positive impact on them when P < 220 W. The UTS and EL of samples fabricated by the optimal process parameters were 718 ± 5 MPa and 27.9 % ± 0.1 %, respectively. The outstanding strength-ductility balance is attributable to the forward stresses in hard α'-martensite and back stresses in soft αm'-martensite induced by the strain gradients of hetero-microstructure. The back stresses strengthen the soft αm'-martensite, improving the overall UTS. The forward stresses stimulate the activation of dislocations in hard α'-martensite and the generation of 〈c + a〉 dislocations, allowing the plastic strain to occur in hard regions and enhancing the overall ductility. This work provides a feasible strategy for multi-objective optimization and valuable insights into tailoring the microstructure for improving mechanical properties.展开更多
In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were invest...In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.展开更多
The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the...The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the columnar structures and fine martensite formation.This study investigated the effect of carbon nanotubes(CNTs)addition on the microstructure and mechanical properties of grade 1 CP-Ti(Gr-1)during the laser powder bed fusion(L-PBF)process.A minute amount of 0.2%mass fraction(wt%)CNTs addition resulted in a high yield strength of approximately 700 MPa and exceptional ductility of 25.7%.Therein,a portion of the CNTs dissolved in the matrix as solute atoms,contributing to solution strengthening,while others were transformed into Ti C_(x)through an in situ reaction with the Ti matrix.Furthermore,the addition of CNTs resulted in the formation of a larger fraction of equiaxed grains and increased the activity of basal and prismatic slip systems.Hence,Gr-1 with CNTs exhibited significantly increased ductility while maintaining a high strength comparable to that of Gr-1 without CNTs.The insights gained from this study provide a novel approach for designing strong and ductile Ti alloys for AM.展开更多
The microstructures of a Ti−5Al−5Mo−5V−1Cr−1Fe alloy with a strain gradient from 0.1 to 1 were obtained by double-cone compression experiments.The deformation microstructures were analyzed by EBSD and TEM.The results ...The microstructures of a Ti−5Al−5Mo−5V−1Cr−1Fe alloy with a strain gradient from 0.1 to 1 were obtained by double-cone compression experiments.The deformation microstructures were analyzed by EBSD and TEM.The results show that the deformation mechanism is dynamic recovery when the strain is less than 0.42.In the strain range of 0.42−0.88,the deformation mechanism is dynamic recrystallization.When the strain exceeds 0.88,the deformation bands appear.The deformation mechanism map combined with the homogenization degree of the microstructure was constructed.The more homogeneous deformed microstructure was obtained at the strain of 0.6 and the temperature of 860°C.The dynamic recrystallization forms new grains and reduces the size difference between the grains,which improves the homogenization degree of the microstructure.展开更多
基金financial support from the Yunnan Province Key Industries Science and Technology Special Project for Colleges and UniversitiesChina(No.FWCY-QYCT2024006)+6 种基金National Natural Science Foundation of China(Nos.52104351 and 52364051)Science and Technology Major Project of Yunnan Province,China(No.202202AG050007)the Yunnan Fundamental Research ProjectsChina(No.202401AT070314)the Key Technology Research and Development Program of Shandong Province,China(No.2023CXGC010903)Central Guidance Local Scientific and Technological Development Funds,China(No.202407AB110022)Yunnan Province Xingdian Talent Support Plan Project,China。
文摘Titanium exhibits outstanding properties,particularly,high specific strength and resistance to both high and low temperatures,earning it a reputation as the metal of the future.However,because of the highly reactive nature of titanium,metallic titanium production involves extensive procedures and high costs.Considering its advantages and limitations,the European Union has classified titanium metal as a critical raw material(CRM)of low category.The Kroll process is predominantly used to produce titanium;however,molten salt electrolysis(MSE)is currently being explored for producing metallic titanium at a low cost.Since 2000,electrolytic titanium production has undergone a wave of technological advancements.However,because of the intermediate and disproportionation reactions in the electrolytic titanium production process,the process efficiency and titanium purity according to industrial standards could not be achieved.Consequently,metallic titanium production has gradually diversified into employing technologies such as thermal reduction,MSE,and titanium alloy preparation.This study provides a comprehensive review of research advances in titanium metal preparation technologies over the past two decades,highlighting the challenges faced by the existing methods and proposing potential solutions.It offers useful insights into the development of low-cost titanium preparation technologies.
基金Financial supports from the National Natural Science Foundation of China (Nos.22025109,22371283)the National Key R&D Program of China (No.2023YFA1507902)+1 种基金CAS Project for Young Scientists in Basic Research (No.YSBR-050)the State Key Laboratory of Fine Chemicals,Dalian University of Technology (No.KF2102) are gratefully acknowledged。
文摘The direct transformation of dinitrogen(N_(2)) into nitrogen-containing organic compounds holds substantial importance.In this work,we report a titanium-promoted method for the conversion of N_(2) to N-methylimides.Initially,the N_(2)-bridging end-on dititanium side-on dipotassium complex[{(Tren^(TMS))Ti}_(2)(μ-η^(1):η^(1):η^(2):η^(2)-N_(2)K_(2))] underwent simultaneous disproportionation and N-methylation reactions in the presence of methyl trifluoromethanesulfonate(Me OTf),yielding [{(N^(Me,TMS)NN^(TMS)_(2))Ti}(μ-NMe)]_(2) with complete cleavage of the N≡N bond.The nucleophilicity of the N-methylated intermediate allowed it to react with electrophilic reagents such as trimethylchlorosilane(TMSCl) to form heptamethyldisilazane,or with acyl chlorides to generate N-methylimides.Moreover,nitrogen-15(^(15)N) labeled experiments provided a novel approach to synthesizing ^(15)N-labeled methylimides.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(ZC2023SH0075)the National Natural Science Foundation of China(52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship Program by·CAST(2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(251111231400)。
文摘Ti-5Al-5Mo-5Cr-2Zr-xNb with different Nb(abbreviated as Ti-5552-xNb,x=3,6,9,12,wt.%)contents were stretched at 923 K to study their superplastic behavior and mechanical properties below recrystallization temperature.The microstructure of as-cast Ti-5552-xNb alloy is consisted of a singleβphase,and theβgrain size increases slightly with the increase of Nb content.The thermal effect in the process of high temperature drawing leads to the precipitation ofαphase.The addition of Nb in Ti-5552 titanium alloys reduces theα/βphase transformation temperature,which causes a decrease in the volume fraction ofαphase.Reducing theαphase content reduces incompatibility,but too low a proportion ofαphase will lead to premature fracture,so tensile strength and plasticity firstly increase and then decrease.The results show that Ti-5552-9Nb titanium alloy shows the best tensile strength(307.2 MPa)and superplasticity(106%).The superplastic mechanism of Ti-5552-9Nb alloy is mainly caused by relative sliding ofβgrain boundaries and dislocation movement.
基金supported by the National Natural Science Foundation of China(No.52175414)the Natural Science Foundation of Jiangsu Province of China(No.BK20220134)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.NE2023002)the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(No.KYCX24_0559)。
文摘During electrochemical machining(ECM),the passivation film formed on the surface of titanium alloy can lead to uneven dissolution and pitting.Solid particle erosion can effectively remove this passivation film.In this paper,the electrochemical dissolution behavior of Ti-6.5Al-2Zr-1Mo-1V(TA15)titanium alloy at without particle impact,low(15°)and high(90°)angle particle impact was investigated,and the influence of Al_(2)O_(3)particles on ECM was systematically expounded.It was found that under the condition of no particle erosion,the surface of electrochemically processed titanium alloy had serious pitting corrosion due to the influence of the passivation film,and the surface roughness(Sa)of the local area reached 10.088μm.Under the condition of a high-impact angle(90°),due to the existence of strain hardening and particle embedding,only the edge of the surface is dissolved,while the central area is almost insoluble,with the surface roughness(S_(a))reaching 16.086μm.On the contrary,under the condition of a low-impact angle(15°),the machining efficiency and surface quality of the material were significantly improved due to the ploughing effect and galvanic corrosion,and the surface roughness(S_(a))reached 2.823μm.Based on these findings,the electrochemical dissolution model of TA15 titanium alloy under different particle erosion conditions was established.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
文摘Titanium metal and alloy are key materials for technological development,which significantly promote the development of the hightech economy in China.The consumption of high-end titanium materials and the developmental level of the titanium industry are important indexes of a country’s comprehensive power.However,at present,the application amount and level of high-end titanium materials in China are limited by many factors,including the dependence of raw materials on imports,high processing cost,and structural imbalance of products.Based on the characteristics of titanium resources and the current situation of the titanium industry,the whole titanium industrial chain in China should be updated.Improving the quality of raw materials is important to produce low-cost,high-end titanium materials using titanium resources with high calcium and magnesium contents in the Panxi region.In addition,the steel-titanium joint production is a vital step to reduce the processing cost of titanium materials.Moreover,the consumption structure of titanium materials should be completed to expand their application.Gradually implementing these suggestions,the overall level of China’s titanium industry will be greatly improved,thereby rapidly establishing an advanced scientific and technological country.
基金Key Research and Development Plan of Shaanxi Province(2023-YBGY-493)。
文摘As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven size distribution.Through electron backscattered diffraction(EBSD),the forged microstructure at various locations of as-forged WSTi6421 titanium alloy billet was analyzed,revealing that the strength of theβphase cubic texture generated by forging significantly influences the grain size afterβannealing.Heat treatment experiments were conducted within the temperature range from T_(β)−50°C to T_(β)+10°C to observe the macro-and micro-morphologies.Results show that the cubic texture ofβphase caused by forging impacts the texture of the secondaryαphase,which subsequently influences theβphase formed during the post-βannealing process.Moreover,the pinning effect of the residual primaryαphase plays a crucial role in the growth ofβgrains during theβannealing process.EBSD analysis results suggest that the strength ofβphase with cubic texture formed during forging process impacts the orientation distribution differences ofβgrains afterβannealing.Additionally,the development of grains with large orientations within the cubic texture shows a certain degree of selectivity duringβannealing,which is affected by various factors,including the pinning effect of the primaryαphase,the strength of the matrix cubic texture,and the orientation relationship betweenβgrain and matrix.Comprehensively,the stronger the texture in a certain region,the less likely the large misoriented grains suffering secondary growth,thereby aggregating the difference in microstructure and grain orientation distribution across different regions afterβannealing.
基金financially supported by the Key Research and Development Program of Ningbo(Grant No.2023Z098)Natural Science Foundation of Inner Mongolia(Grant No.2023MS05040)+1 种基金Shenyang Collaborative Innovation Center Project for Multiple Energy Fields Composite Processing of Special Materials(Grant No.JG210027)Shenyang Key Technology Special Project of The Open Competition Mechanism to Select the Best Solution(Grant Nos.2022210101000827,2022-0-43-048).
文摘Titanium alloy has the advantages of high strength,strong corrosion resistance,excellent high and low temperature mechanical properties,etc.,and is widely used in aerospace,shipbuilding,weapons and equipment,and other fields.In recent years,with the continuous increase in demand for medium-thick plate titanium alloys,corresponding welding technologies have also continued to develop.Therefore,this article reviews the research progress of deep penetration welding technology for medium-thick plate titanium alloys,mainly covering traditional arc welding,high-energy beam welding,and other welding technologies.Among many methods,narrow gap welding,hybrid welding,and external energy field assistance welding all contribute to improving the welding efficiency and quality of medium-thick plate titanium alloys.Finally,the development trend of deep penetration welding technology for mediumthick plate titanium alloys is prospected.
基金financially supported by the National Natural Science Foundation of China(Nos.92160301,92060203,52175415 and 52205475)the Science Center for Gas Turbine Project(No.P2023-B-IV-003-001)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210295)the Huaqiao University Engineering Research Center of Brittle Materials Machining(MOE,2023IME-001)。
文摘The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and medical sectors.However,conventional machining of titanium alloys leads to elevated tool wear,development of surface defects,and reduced machining efficiency due to their low heat conductivity,and chemical affinity.These issues can be somewhat counteracted by integrating ultrasonic vibration in the conventional machining of titanium alloys and also enhance sustainability.This review article offers a holistic evaluation of the influence of ultrasonic vibration-assisted milling and turning on cutting forces,temperature,tool wear,and surface integrity,encompassing surface morphology,surface roughness,surface residual stress,surface hardness,and surface tribological properties during titanium alloys machining.Furthermore,it investigates the sustainability aspect that has not been previously examined.Studies on the performance of ultrasonic-assisted cutting revealed several advantages,including decreased cutting forces and cutting temperature,improved tool life,and a better-machined surface during machining.Consequently,the sustainability factor is improved due to minimized energy consumption and residual waste.In conclusion,the key challenges and future prospects in the ultrasonic-assisted cutting of titanium alloys are also discussed.This review article provides beneficial knowledge for manufactur-ers and researchers regarding ultrasonic vibration-assisted cutting of titanium alloy and will play an important role in achieving sustainability in the industry.
基金supported by the National Key R&D Plan of China(No.2022YFB3705603)the National Natural Science Foundation of China(No.52101046)+1 种基金the Excellent Youth Overseas Project of National Science and Natural Foundation of China,the Baowu Special Metallurgy Cooperation Limited(No.22H010101336)the Medicine-Engineering Interdisciplinary Project of Shanghai Jiao Tong University(No.YG2022QN076).
文摘Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional surface strengthening technologies,laser shock peening(LSP)has increasingly attracted attention from researchers and industries,since it significantly improves the surface strength,biocompatibility,fa-tigue resistance,and anti-corrosion ability of Ti and its alloys.Despite numerous studies that have been carried out to elucidate the effects of LSP on microstructural evolution and mechanical properties of Ti and its alloys in recent years,a comprehensive review of recent advancements in the field of Ti and its alloys subjected to LSP is still lacking.In this review,the standard LSP and the novel process designs of LSP assisted by thermal,cryogenic,electropulsing and magnetic fields are discussed and compared.Microstructural evolution,with focuses on the dislocation dynamics,deformation twinning,grain refine-ment and surface amorphization,during LSP processing of Ti alloys is reviewed.Furthermore,the en-hanced engineering performance of the L SP-processed(L SPed)Ti alloys,including surface hardness,wear resistance,fatigue life and corrosion resistance are summarized.Finally,this review concludes by present-ing an overview of the current challenges encountered in this field and offering insights into anticipated future trends.
基金supported by the National Natural Science Foundation of China(Nos.52271113,92163201)Jinyu Zhang is grateful for the Shaanxi Province Youth Innovation Team(No.22JP042)Shaanxi Province Innovation Team Project(2024RS-CXTD-58).
文摘Titanium alloys engineered in structural applications achieve ultrahigh strength primarily through precipitation strengthening of secondary α-phase(αs)during aging,while they often experience compromised ductility and toughness due to traditional strength-toughness tradeoff.In this study,we propose a novel strategy to address this conflict by introducing deformation kinks prior to conventional cold rolling(CR)and aging processes.These kinks are produced by cold forging(CF)to create macroscopic lamellar structures in β-grains,which alter strain partitioning during subsequent CR and ultimately tailor α_(s)-precipitation upon aging.As a result,an ultrafine duplex(αe+β)-structure is formed within kink interi-ors,while hierarchicalαs-precipitates are generated in the external β-matrix.This unique microstructure effectively enhances dislocation activity,promotes uniform plastic strain distribution and impedes crack propagation.Consequently,a simple Ti-V binary titanium alloy exhibits exceptional properties with ultra-high strength∼1636 MPa,decent ductility∼5.4% and appreciable fracture toughness∼36.1 MPa m^(1/2).The synergetic properties surpass those obtained through traditional CR and aging processes for the alloy and even outperform numerous multielement engineering titanium alloys reported in literature.Our findings open up a new avenue for overcoming the strength-toughness tradeoffof ultrahigh-strength titanium alloys,and also offer a facile production route towards structural materials for advanced performance.
基金supported by National Nature Science Foundation of China(22105118)Nature Science Foundation of Shandong Provinces(ZR2021QB095)China Postdoctoral Science Foundation(2020TQ0183 and 2021M701979).
文摘Sodium-ion batteries(SIBs)hold great promise for large-scale energy storage in the post-lithium-ion battery era due to their high rate performance and long lifespan,although their sluggish Na^(+) transformation kinetics still require improvement.Encouraged by the excellent electrochemical performance of titanium-based anode materials,here,we present a novel titanium vanadate@carbon(TVO@C)material as anode for SIBs.Our TVO@C material is synthesized via a facile coprecipitation method,with the following annealing process in an acetylene atomosphere.The opened ion channel and the oxygen vacancies within TVO@C facilitate the diffusion of Na^(+) ions,reducing their diffusion barrier.Thus,an ultrahigh rate of 100 A g^(-1)and long life of 10,000 cycles have been achieved.Furthermore,the TVO@C electrode exhibits stable performance,not only at room temperature,but also at temperatures as low as 20 C.The TVO@CjjNa_(3)V_(2)(PO_(4))_(3)@C full cells have also achieved stable discharge/charge for 500 cycles.It is believed that this strategy provides new insight into the development of advanced electrodes and provides a new opportunity for constructing novel high rate electrodes.
基金supported by the National Natural Science Foundation of China(Nos.52074231,52274396 and 52001258)the Chongqing Natural Science Foundation(No.cstc2020jcyj-msxmX1056).
文摘Crack initiation mechanism of dwell fatigue has always been a key problem in rationalizing the dwell effect,and it is not completely understood yet.This study conducted stress-controlled low-cycle fatigue and dwell fatigue tests on Ti-6Al-3Nb-2Zr-1Mo alloy with bimodal microstructure to reveal its microstructural characteristics and crack initiation mechanisms.The study demonstrated that the faceted primaryα nodules located near the specimen surface acted as crack initiation sites during both fatigue and dwell fatigue tests.Slip trace analysis revealed that faceted cracking occurred at(0001)basal plane with the maximum Schmid factor value through a special cracking mode referred to as(0001)twist boundary cracking.Innovative criteria of parameters C1 and C2 were proposed based on experimental observation and molecular dynamics simulations,which well identify candidates for(0001)twist boundary crack nucleation.It demonstrated that grain pairs combining a moderately high Schmid factor for basal slip and a well-orientated Burgers vector in the out-of-surface plane was the preferable location for surface(0001)twist-boundary crack initiation,and grain pairs combining a high Schmid factor for basal slip and a high normal stress on basal plane are perfect candidates for subsurface cracking.Based on this,phenomeno-logical models are proposed to explain the surface(0001)twist-boundary cracking mechanism from the perspective of surface extrusion-intrusion-induced micro-notches.
基金supported by the National Key R&D Program of China(No.2021YFC2901200)National Natural Science Foundation of China(Nos.52174383 and 52374412)Liaoning Provincial Natural Science Foundation of China(No.2022-YQ-09).
文摘To recover the valuable elements in Bayan Obo tailings,Fe-Si bath smelting reduction was adopted to separate and enrich rare earth elements(REE),niobium and titanium from the REE-Nb-Ti-containing slag.The reduction reaction process of the Fe-Si bath and the migration behavior of valuable elements in the solidification and crystallization process of silicothermic reduction tailings were investigated,and a treatment method for efficiently separating and enriching REE,Nb and Ti was explored.Thermodynamic analysis indicated that at 1600℃,with a 6 wt.%addition of Si as the reducing agent,the niobium oxide in the REE-Nb-Ti-containing slag could be selectively reduced to metallic Nb.In the Fe-Si bath reduction process,the Nb mass fraction in the metal phase increased with prolonged reaction time,peaking at 2.77%,while the Ti mass fraction consistently stayed below 0.12%.Lowering the w(CaO)/w(SiO_(2))enhanced the migration of Nb from slag to metal phase and reduced the Ti impurities.During solidification and crystallization,a significant quantity of perovskite precipitated from reduction tailings,with the REE dissolving into this perovskite.By adjusting the w(CaO)/w(SiO_(2))in tailings to 1.2-1.9 and maintaining a temperature of 1100℃for 4 h,the perovskite area fraction in the final slag could exceed 37%.Finally,a method was proposed to separate and enrich valuable elements in REE-Nb-Ti-containing slags via Fe-Si bath smelting reduction and crystallization control.
基金the National Natural Science Foundation of China(No.52205468)China Postdoctoral Science Foundation(No.2022M710061 and No.2023T160277)Natural Science Foundation of Jiangsu Province(No.BK20210755)。
文摘Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.
基金supported by the National Natural Sci-ence Foundation of China(Nos.52274359 and 52304379)the China National Postdoctoral Program for Innovative Talents(No.BX20220034)+2 种基金the China Postdoctoral Science Foundation(No.2022M720403)the AECC University Research Cooperation Project(No.HFZL2021CXY021)the Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities)(No.FRF-IDRY-23-025).
文摘Achieving the simultaneous enhancement of strength and ductility in laser powder bed fused (LPBF-ed) titanium (Ti) is challenging due to the complex, high-dimensional parameter space and interactions between parameters and powders. Herein, a hybrid intelligent framework for process parameter optimization of LPBF-ed Ti with improved ultimate tensile strength (UTS) and elongation (EL) was proposed. It combines the data augmentation method (AVG ± EC × SD), the multi-model fusion stacking ensemble learning model (GBDT-BPNN-XGBoost), the interpretable machine learning method and the non-dominated ranking genetic algorithm (NSGA-Ⅱ). The GBDT-BPNN-XGBoost outperforms single models in predicting UTS and EL across the accuracy, generalization ability and stability. The SHAP analysis reveals that laser power (P) is the most important feature affecting both UTS and EL, and it has a positive impact on them when P < 220 W. The UTS and EL of samples fabricated by the optimal process parameters were 718 ± 5 MPa and 27.9 % ± 0.1 %, respectively. The outstanding strength-ductility balance is attributable to the forward stresses in hard α'-martensite and back stresses in soft αm'-martensite induced by the strain gradients of hetero-microstructure. The back stresses strengthen the soft αm'-martensite, improving the overall UTS. The forward stresses stimulate the activation of dislocations in hard α'-martensite and the generation of 〈c + a〉 dislocations, allowing the plastic strain to occur in hard regions and enhancing the overall ductility. This work provides a feasible strategy for multi-objective optimization and valuable insights into tailoring the microstructure for improving mechanical properties.
文摘In this work,the influences of surface layer slurry at different temperatures(10℃,14℃,18℃,22℃)on wax patterns deformation,shrinkage,slurry coating characteristics,and the surface quality of the casting were investigated by using a single factor variable method.The surface morphologies of the shell molds produced by different temperatures of the surface(first)layer slurries were observed via electron microscopy.Furthermore,the microscopic composition of these shell molds was obtained by EDS,and the osmotic effect of the slurry on the wax patterns at different temperatures was also assessed by the PZ-200 Contact Angle detector.The forming reasons for the surface cracks and holes of thick and large ZTC4 titanium alloy by investment casting were analyzed.The experimental results show that the surface of the shell molds prepared by the surface layer slurry with a low temperature exhibits noticeable damage,which is mainly due to the poor coating performance and the serious expansion and contraction of wax pattern at low temperatures.The second layer shell material(SiO_(2),Al_(2)O_(3))immerses into the crack area of the surface layer,contacts and reacts with the molten titanium to form surface cracks and holes in the castings.With the increase of the temperature of surface layer slurry,the damage to the shell surface tends to weaken,and the composition of the shell molds'surface becomes more uniform with less impurities.The results show that the surface layer slurry at 22℃is evenly coated on the surface of the wax patterns with appropriate thickness,and there is no surface shell mold rupture caused by sliding slurry after sand leaching.The surface layer slurry temperature is consistent with the wax pattern temperature and the workshop temperature,so there is no damage of the surface layer shell caused by expansion and contraction.Therefore,the shell mold prepared by the surface layer slurry at this temperature has good integrity,isolating the contact between the low inert shell material and the titanium liquid effectively,and the ZTC4 titanium alloy cylinder casting prepared by this shell mold is smooth,without cracks and holes.
基金financially supported by the National Key Research and Development Project of the Ministry of Science and Technology of China(No.2022YFB4601000)the Fundamental Research Funds for the Central Universities(No.2042023kf0103)the Ministry of Trade,Industry and Energy,Korea(No.20013095)。
文摘The features of additive manufacturing(AM)have made commercially pure titanium(CP-Ti)an attractive candidate material for biomedical implants.However,achieving high strength and ductility is challenging because of the columnar structures and fine martensite formation.This study investigated the effect of carbon nanotubes(CNTs)addition on the microstructure and mechanical properties of grade 1 CP-Ti(Gr-1)during the laser powder bed fusion(L-PBF)process.A minute amount of 0.2%mass fraction(wt%)CNTs addition resulted in a high yield strength of approximately 700 MPa and exceptional ductility of 25.7%.Therein,a portion of the CNTs dissolved in the matrix as solute atoms,contributing to solution strengthening,while others were transformed into Ti C_(x)through an in situ reaction with the Ti matrix.Furthermore,the addition of CNTs resulted in the formation of a larger fraction of equiaxed grains and increased the activity of basal and prismatic slip systems.Hence,Gr-1 with CNTs exhibited significantly increased ductility while maintaining a high strength comparable to that of Gr-1 without CNTs.The insights gained from this study provide a novel approach for designing strong and ductile Ti alloys for AM.
基金supported by the National Natural Science Foundation of China(Nos.52441410,52020105013)the State Key Laboratory for Powder Metallurgy,China(No.2022)。
文摘The microstructures of a Ti−5Al−5Mo−5V−1Cr−1Fe alloy with a strain gradient from 0.1 to 1 were obtained by double-cone compression experiments.The deformation microstructures were analyzed by EBSD and TEM.The results show that the deformation mechanism is dynamic recovery when the strain is less than 0.42.In the strain range of 0.42−0.88,the deformation mechanism is dynamic recrystallization.When the strain exceeds 0.88,the deformation bands appear.The deformation mechanism map combined with the homogenization degree of the microstructure was constructed.The more homogeneous deformed microstructure was obtained at the strain of 0.6 and the temperature of 860°C.The dynamic recrystallization forms new grains and reduces the size difference between the grains,which improves the homogenization degree of the microstructure.
