The IndyCar series distinguishes itself by providing the same design and operation of the single-seater to its pilots.The difference in times is then attributable to the skills of the drivers,but considering the data ...The IndyCar series distinguishes itself by providing the same design and operation of the single-seater to its pilots.The difference in times is then attributable to the skills of the drivers,but considering the data from the races could test this assumption.The objective of this work was to establish a trajectory model to predict race times.A cross-sectional,correlational,and explanatory work was carried out with a sample of 18,474 records in the period from 2020 to 2023 of the IndyCar series.The results show that the time span predicts the time differences.In relation to the studies of acceptance of the technology,the adjustment of this to human capacities to explain the time differences in the series of racing cars is discussed.展开更多
针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference ...针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference of arrival)无线电技术的多源融合方案的基础上,构建无人飞行器探测技术评价指标体系,并建立了一种基于决策试验评估实验室(decision-making trial and evaluation laboratory, DEMATEL)和优劣解距离法(technique for order preference by similarity to an ideal solution, TOPSIS)的多属性评价方法。结果发现,以TDOA为基础的多源融合方案是构建城市低空安防体系的有效路径和普适性方案。研究表明,低空安防体系的建设是一个系统性工程,需要政府、企业和社会各方的共同努力,在技术、数据、运营等多个层面进行整合,以适应未来低空经济的发展需求。展开更多
In this study,we design and numerically investigate a novel all optical D flip-flop(AODFF)based on linear photonic crystal(LPhC)structure that is composed of optical waveguides using the finite difference time domain(...In this study,we design and numerically investigate a novel all optical D flip-flop(AODFF)based on linear photonic crystal(LPhC)structure that is composed of optical waveguides using the finite difference time domain(FDTD)method.The proposed structure has the hexagonal close packed of 16×20 circular rods that are suspended in the air substrate with a lattice constant of 606 nm.The plane wave expansion(PWE)method is used to obtain the band diagram for AODFF at an operating wavelength of 1550 nm.The proposed optical flip-flop achieves a low delay time of 0.2 ps and a high contrast ratio(CR)of 10.33 dB.The main advantage of this design is that the input power as low as 1 mW/μm^(2) is sufficient for its operation,since no nonlinear rods are included.In addition,the footprint of the proposed AODFF is 100μm^(2),which is smaller compared to the structures reported in the literature,and it has a fast switching frequency of 5 Tbit/s.展开更多
This paper presents a photonic crystal(PhC)line-defect slow-light waveguide modified by resonant rings.We introduce resonant rings into the line defect,constructing a slow-light waveguide with high normalized delay ba...This paper presents a photonic crystal(PhC)line-defect slow-light waveguide modified by resonant rings.We introduce resonant rings into the line defect,constructing a slow-light waveguide with high normalized delay bandwidth product(NDBP)and low group velocity dispersion(GVD).We simulate,analyze,and optimize the structural parameters of this slow-light waveguide using the finite difference time domain(FDTD)method,theoretically achieving a maximum group index of 3.7,maximum bandwidth of 15.6 nm,and maximum NDBP of 0.4416 for slow-light effect.The resonant ring-modified PhC slow-light waveguide designed in this paper exhibits GVD lower than the order of 10^(−20)s^(2)/m over a normalized frequency range from 0.3554 to 0.4175.This study is expected to provide theoretical references for the study of slow-light buffering devices based on PhCs with high NDBP values.展开更多
BACKGROUND: Generally speaking, anesthesia is often used in gravid body and it has been already proved that many kind of medicine can result in malformation. OBJECTIVE: To explore embryonic skeleton development and ne...BACKGROUND: Generally speaking, anesthesia is often used in gravid body and it has been already proved that many kind of medicine can result in malformation. OBJECTIVE: To explore embryonic skeleton development and neonatal learning and memory of rats anesthetized with pentobarbital sodium in gravid rats. DESIGN: A randomized control trial. SETTING: Laboratory Animal Center of Xuzhou Medical College. MATERIALS: A total of 80 adult female SD rats, of clean grade and weighing 220-240 g, were selected in this study. The main reagents were detailed as follows: pentobarbital sodium (Shanghai Xingzhi Chemical Plant, batch number: 921019); MG-2 maze test apparatus (Zhangjiagang Biomedical Instrument Factory); somatotype microscope (Beijing Taike Instrument Co., Ltd.). METHODS: ① A total of 160 SD rats of half males and females were selected in this study. All rats were copulated. The day that the plug was checked out in the vagina next day was looked as the first day of pregnancy. Gravid rats were divided randomly into four groups, including early anesthesia group, second anesthesia group, late anesthesia group and control group with 20 in each group. Rats in the early anesthesia group were injected with 25 mg/kg soluble pentobarbitone on the 7th day of pregnancy for once; rats in the second anesthesia group were anesthetized with 25 mg/kg soluble pentobarbitone on the 7th and the 14th days of pregnancy for once; rats in the late anesthesia group were anesthetized with 25 mg/kg soluble pentobarbitone on the 14th day of pregnancy for once; rats in the control group did not treat with anything. The time of anesthetizing was controlled in 3 to 4 hours and ether was absorbed while the time was not enough. ② Half of each group was sacrificed on day 20th of pregnancy and the fetus was taken out to be stained with alizarin red S. After stained, the fetal skeleton was examined. The learning and memorizing of one-month rats that were given birth by the rest gravid rats were tested through electric mare method. Determine their study ability according to their correct rate of 90% or above of arrival at the safe area in 20 s. After they finally learned to arrive at the safe area correctly, test them once more in 24 hours and record the correct rate of 15 times. MAIN OUTCOME MEASURES: The rate of malformation in fetus and ability of learning and memory in one-month rats. RESULTS: A total of 80 female rats were anesthetized in this experiment. Totally 490 immature rats were tested with maze testing machine and 196 fetuses were stained with alizarin red S to observe the development of their skeleton. However, one of the 80 female rats was led to death because of overdose. ① Malformation experiment: Learning ability of second anesthesia group was evidently different from the control group while the other two groups were not in the electric mare method. The fetal skeleton malformation rate of three experimental groups was 87.0%, 60.9% and 17.9%, respectively, while it was 5.6% in the control group. ② Electric mare method: Times of rats which arrived at the safe regions were respectively 49.0±31.0, 68.0±35.0, 47.0±31.0 and 44.0±21.0 in early anesthesia group, second anesthesia group, late anesthesia group and control group; and then, there was significant difference between the second anesthesia group and the control group (P < 0.05). Exact rates of memory of rats were respectively (64.36±14.35)%, (62.15±18.33)%, (54.19±12.28)% and (68.24±15.91)% in early anesthesia group, second anesthesia group, late anesthesia group and control group; and then, there were no significant differences as compared with the control group (P > 0.05). CONCLUSION: The influence of anesthesia with pentobarbital sodium is obvious in fetal skeleton development and learning and memory ability.展开更多
Classical localization methods use Cartesian or Polar coordinates, which require a priori range information to determine whether to estimate position or to only find bearings. The modified polar representation (MPR) u...Classical localization methods use Cartesian or Polar coordinates, which require a priori range information to determine whether to estimate position or to only find bearings. The modified polar representation (MPR) unifies near-field and farfield models, alleviating the thresholding effect. Current localization methods in MPR based on the angle of arrival (AOA) and time difference of arrival (TDOA) measurements resort to semidefinite relaxation (SDR) and Gauss-Newton iteration, which are computationally complex and face the possible diverge problem. This paper formulates a pseudo linear equation between the measurements and the unknown MPR position,which leads to a closed-form solution for the hybrid TDOA-AOA localization problem, namely hybrid constrained optimization(HCO). HCO attains Cramér-Rao bound (CRB)-level accuracy for mild Gaussian noise. Compared with the existing closed-form solutions for the hybrid TDOA-AOA case, HCO provides comparable performance to the hybrid generalized trust region subproblem (HGTRS) solution and is better than the hybrid successive unconstrained minimization (HSUM) solution in large noise region. Its computational complexity is lower than that of HGTRS. Simulations validate the performance of HCO achieves the CRB that the maximum likelihood estimator (MLE) attains if the noise is small, but the MLE deviates from CRB earlier.展开更多
Leakages from subsea oil and gas equipment cause substantial economic losses and damage to marine ecosystem,so it is essential to locate the source of the leak.However,due to the complexity and variability of the mari...Leakages from subsea oil and gas equipment cause substantial economic losses and damage to marine ecosystem,so it is essential to locate the source of the leak.However,due to the complexity and variability of the marine environment,the signals collected by hydrophone contain a variety of noises,which makes it challenging to extract useful signals for localization.To solve this problem,a hydrophone denoising algorithm is proposed based on variational modal decomposition(VMD)with grey wolf optimization.First,the average envelope entropy is used as the fitness function of the grey wolf optimizer to find the optimal solution for the parameters K andα.Afterward,the VMD algorithm decomposes the original signal parameters to obtain the intrinsic mode functions(IMFs).Subsequently,the number of interrelationships between each IMF and the original signal was calculated,the threshold value was set,and the noise signal was removed to calculate the time difference using the valid signal obtained by reconstruction.Finally,the arrival time difference is used to locate the origin of the leak.The localization accuracy of the method in finding leaks is investigated experimentally by constructing a simulated leak test rig,and the effectiveness and feasibility of the method are verified.展开更多
The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidanc...The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidance system.This paper presents a new method that uses the Finite Difference Time Domain(FDTD)method to calculate the electrical performance of radomes under Thermo-Mechanical-Electrical(TME)coupling.This method can accurately characterize the effects of material dielectric temperature drift and structural deformation on the electrical performance of the radome under flight conditions,enabling high-precision full-wave calculations of the broadband electrical performance of the radome.The method initiates by utilizing a Finite Element Grid Model(FE-GM)of the radome to sequentially acquire the radome's response temperature field and structural deformation field through thermal and mechanical simulations.Subsequently,spatial mapping techniques are developed to accurately incorporate the dielectric temperature drift and structural deformation of the radome into its Yee grid Electromagnetic(EM)simulation model.A verification case was designed to test the proposed method,and the results confirmed its high computational accuracy.Additionally,the effectiveness and necessity of the method were further demonstrated by analyzing the electrical performance of a fused silica ceramic radome used on a high-speed aircraft.展开更多
Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localizati...Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localization based on group waves’ time difference information Firstly, extract the time difference corresponding to direct P wavers dominant frequency by utilizing its propagation characteristics. Secondly, construct TDOA model with non-prediction velocity and identify objective function of particle swarm optimization （PSO）. Afterwards, construct the initial particle swarm by using time difference information Finally, search the localization results in optimal solution space. The results of experimental verification show that the microseismic localization method proposed in this paper effectively enhances the localization accuracy of microseismic explosion source with positioning error less than 50 cm, which can satisfy the localization requirements of shallow burst point and has definite value for engineering application in underground space positioning field.展开更多
The transmission and dispersive characteristics of slotline are calculated in this paper. The tail of Gaussion pulse is improved because a modified dispersive boundary condition (DBC) is adopted. It leads to a reduct...The transmission and dispersive characteristics of slotline are calculated in this paper. The tail of Gaussion pulse is improved because a modified dispersive boundary condition (DBC) is adopted. It leads to a reduction in computer memory requirements and computational time. The computational domain is greatly reduced to enable performance in personal computer. At the same time because edges of a boundary and summits are treated well, the computational results is more accurate and more collector.展开更多
The mode frequencies and the quality factors for the equilateral triangular resonator (ETR), the square resonator (SR) and the rhombus resonator (RR) are numerically calculated by the finite difference time domai...The mode frequencies and the quality factors for the equilateral triangular resonator (ETR), the square resonator (SR) and the rhombus resonator (RR) are numerically calculated by the finite difference time domain technique and the Padé approximation. The numerical results show that the resonant modes confined in an equilateral triangular cavity have much higher quality factors than those in the square or the rhombus cavities. The modes in the ETR are totally confined in transverse direction while those in the SR and RR are only partly confined. For the ETR with the side length of 4μm and the refractive index of 3 2, the mode quality factor of about 5 5×10 3 at the wavelength of 1 55μm has been obtained.展开更多
为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号...为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号,对其差值信号进行WVD分析,准确提取损伤反射信号到达时间;其次,通过ATDM建立各传感器间的距离差值关系,确定孔损伤位置中心并预测最大损伤半径,从而实现对孔损伤关键指标的识别;最后,通过数值模拟进一步验证该方法,结果表明,基于WVD/ATDM的损伤识别技术不仅能准确识别出孔损伤位置,而且能够有效地识别损伤区域面积。展开更多
A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing th...A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing the relations among wave vectors at every port of the network nodes was give Scattering characteristics and electromagnetic distributions of every node was calculated independently using FDTD A structure of irises in a waveguide was taken as numerical examples This hybrid method has more advantages than the traditional FDTD method which includes saving calculation time,saving memory spaces and being flexible in setting up FDTD grids展开更多
The seasonal and source variations of flavonoid contents in Scutellariae Radix were investigated by using the materials collected at the same place in Liaoning Province, China, during three years, 1990～1992, and in s...The seasonal and source variations of flavonoid contents in Scutellariae Radix were investigated by using the materials collected at the same place in Liaoning Province, China, during three years, 1990～1992, and in seven other provinces in China. Four principal flavonoids in the plant roots, i.e., baicalin, baicalein, wogonin 7 O glucuronide and wogonin were analyzed by using a reversed phase chromatographic system with a chemically bonded ODS silica gel column and phosphate buffer methanol (68:32 and 1:1) as mobile phase. The contents of the four compounds combined in the herb collected at Chengde, Hebei Province are the highest. The results show that the best time for harvesting the roots in Liaoning Province is the end of August.展开更多
This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to est...This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to estimate the location of a target. Compared with the TDOA-only method which needs two steps, the proposed method estimates the target position more directly. The constrained total least squares（CTLS） technique is applied in this approach. It achieves the Cramer–Rao lower bound（CRLB） when the parameter measurements are subject to small Gaussian-distributed errors. Performance analysis and the CRLB of this approach are also studied. Theory verifies that the ATDOA method gets a lower CRLB than the TDOA-only method with the same TDOA measuring error. It can also be seen that the position of the target affects estimating precision.At the same time, the locations of transmitters affect the precision and its gradient direction.Compared with the TDOA, the ATDOA method can obtain more precise target position estimation.Furthermore, the proposed method accomplishes target position estimation with a single transmitter,while the TDOA-only method needs at least four transmitters to get the target position. Furthermore,the transmitters＇ position errors also affect precision of estimation regularly.展开更多
For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved pe...For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved perfectly by calculating the target position with the joint TDOA and AOA location.On the condition of rectangular coordinates,first of all,it figures out the radial range between target and reference stations,then calculates the location of the target.In the case of polar coordinates,first of all,it figures out the azimuth between target and reference stations,then figures out the radial range between target and reference stations,finally obtains the location of the target.Simultaneously,simulation analyses show that the theoretical analysis is correct,and the proposed methods also provide the application of the joint TDOA and AOA location algorithm with the theoretical basis.展开更多
Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimati...Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.展开更多
The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference...The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference of Arrival （FDOA）, do not perform well under low Signal-to-Noise Ratio （SNR）, and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound （CRLB）. The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.展开更多
By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating ...By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.展开更多
Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster ...Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.展开更多
文摘The IndyCar series distinguishes itself by providing the same design and operation of the single-seater to its pilots.The difference in times is then attributable to the skills of the drivers,but considering the data from the races could test this assumption.The objective of this work was to establish a trajectory model to predict race times.A cross-sectional,correlational,and explanatory work was carried out with a sample of 18,474 records in the period from 2020 to 2023 of the IndyCar series.The results show that the time span predicts the time differences.In relation to the studies of acceptance of the technology,the adjustment of this to human capacities to explain the time differences in the series of racing cars is discussed.
文摘针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference of arrival)无线电技术的多源融合方案的基础上,构建无人飞行器探测技术评价指标体系,并建立了一种基于决策试验评估实验室(decision-making trial and evaluation laboratory, DEMATEL)和优劣解距离法(technique for order preference by similarity to an ideal solution, TOPSIS)的多属性评价方法。结果发现,以TDOA为基础的多源融合方案是构建城市低空安防体系的有效路径和普适性方案。研究表明,低空安防体系的建设是一个系统性工程,需要政府、企业和社会各方的共同努力,在技术、数据、运营等多个层面进行整合,以适应未来低空经济的发展需求。
文摘In this study,we design and numerically investigate a novel all optical D flip-flop(AODFF)based on linear photonic crystal(LPhC)structure that is composed of optical waveguides using the finite difference time domain(FDTD)method.The proposed structure has the hexagonal close packed of 16×20 circular rods that are suspended in the air substrate with a lattice constant of 606 nm.The plane wave expansion(PWE)method is used to obtain the band diagram for AODFF at an operating wavelength of 1550 nm.The proposed optical flip-flop achieves a low delay time of 0.2 ps and a high contrast ratio(CR)of 10.33 dB.The main advantage of this design is that the input power as low as 1 mW/μm^(2) is sufficient for its operation,since no nonlinear rods are included.In addition,the footprint of the proposed AODFF is 100μm^(2),which is smaller compared to the structures reported in the literature,and it has a fast switching frequency of 5 Tbit/s.
基金supported by the Graduate Student Innovation Fund of Xi’an Shiyou University(No.YCS21211087).
文摘This paper presents a photonic crystal(PhC)line-defect slow-light waveguide modified by resonant rings.We introduce resonant rings into the line defect,constructing a slow-light waveguide with high normalized delay bandwidth product(NDBP)and low group velocity dispersion(GVD).We simulate,analyze,and optimize the structural parameters of this slow-light waveguide using the finite difference time domain(FDTD)method,theoretically achieving a maximum group index of 3.7,maximum bandwidth of 15.6 nm,and maximum NDBP of 0.4416 for slow-light effect.The resonant ring-modified PhC slow-light waveguide designed in this paper exhibits GVD lower than the order of 10^(−20)s^(2)/m over a normalized frequency range from 0.3554 to 0.4175.This study is expected to provide theoretical references for the study of slow-light buffering devices based on PhCs with high NDBP values.
文摘BACKGROUND: Generally speaking, anesthesia is often used in gravid body and it has been already proved that many kind of medicine can result in malformation. OBJECTIVE: To explore embryonic skeleton development and neonatal learning and memory of rats anesthetized with pentobarbital sodium in gravid rats. DESIGN: A randomized control trial. SETTING: Laboratory Animal Center of Xuzhou Medical College. MATERIALS: A total of 80 adult female SD rats, of clean grade and weighing 220-240 g, were selected in this study. The main reagents were detailed as follows: pentobarbital sodium (Shanghai Xingzhi Chemical Plant, batch number: 921019); MG-2 maze test apparatus (Zhangjiagang Biomedical Instrument Factory); somatotype microscope (Beijing Taike Instrument Co., Ltd.). METHODS: ① A total of 160 SD rats of half males and females were selected in this study. All rats were copulated. The day that the plug was checked out in the vagina next day was looked as the first day of pregnancy. Gravid rats were divided randomly into four groups, including early anesthesia group, second anesthesia group, late anesthesia group and control group with 20 in each group. Rats in the early anesthesia group were injected with 25 mg/kg soluble pentobarbitone on the 7th day of pregnancy for once; rats in the second anesthesia group were anesthetized with 25 mg/kg soluble pentobarbitone on the 7th and the 14th days of pregnancy for once; rats in the late anesthesia group were anesthetized with 25 mg/kg soluble pentobarbitone on the 14th day of pregnancy for once; rats in the control group did not treat with anything. The time of anesthetizing was controlled in 3 to 4 hours and ether was absorbed while the time was not enough. ② Half of each group was sacrificed on day 20th of pregnancy and the fetus was taken out to be stained with alizarin red S. After stained, the fetal skeleton was examined. The learning and memorizing of one-month rats that were given birth by the rest gravid rats were tested through electric mare method. Determine their study ability according to their correct rate of 90% or above of arrival at the safe area in 20 s. After they finally learned to arrive at the safe area correctly, test them once more in 24 hours and record the correct rate of 15 times. MAIN OUTCOME MEASURES: The rate of malformation in fetus and ability of learning and memory in one-month rats. RESULTS: A total of 80 female rats were anesthetized in this experiment. Totally 490 immature rats were tested with maze testing machine and 196 fetuses were stained with alizarin red S to observe the development of their skeleton. However, one of the 80 female rats was led to death because of overdose. ① Malformation experiment: Learning ability of second anesthesia group was evidently different from the control group while the other two groups were not in the electric mare method. The fetal skeleton malformation rate of three experimental groups was 87.0%, 60.9% and 17.9%, respectively, while it was 5.6% in the control group. ② Electric mare method: Times of rats which arrived at the safe regions were respectively 49.0±31.0, 68.0±35.0, 47.0±31.0 and 44.0±21.0 in early anesthesia group, second anesthesia group, late anesthesia group and control group; and then, there was significant difference between the second anesthesia group and the control group (P < 0.05). Exact rates of memory of rats were respectively (64.36±14.35)%, (62.15±18.33)%, (54.19±12.28)% and (68.24±15.91)% in early anesthesia group, second anesthesia group, late anesthesia group and control group; and then, there were no significant differences as compared with the control group (P > 0.05). CONCLUSION: The influence of anesthesia with pentobarbital sodium is obvious in fetal skeleton development and learning and memory ability.
基金supported by the National Natural Science Foundation of China (62101359)Sichuan University and Yibin Municipal People’s Government University and City Strategic Cooperation Special Fund Project (2020CDYB-29)+1 种基金the Science and Technology Plan Transfer Payment Project of Sichuan Province (2021ZYSF007)the Key Research and Development Program of Science and Technology Department of Sichuan Province (2020YFS0575,2021KJT0012-2 021YFS-0067)。
文摘Classical localization methods use Cartesian or Polar coordinates, which require a priori range information to determine whether to estimate position or to only find bearings. The modified polar representation (MPR) unifies near-field and farfield models, alleviating the thresholding effect. Current localization methods in MPR based on the angle of arrival (AOA) and time difference of arrival (TDOA) measurements resort to semidefinite relaxation (SDR) and Gauss-Newton iteration, which are computationally complex and face the possible diverge problem. This paper formulates a pseudo linear equation between the measurements and the unknown MPR position,which leads to a closed-form solution for the hybrid TDOA-AOA localization problem, namely hybrid constrained optimization(HCO). HCO attains Cramér-Rao bound (CRB)-level accuracy for mild Gaussian noise. Compared with the existing closed-form solutions for the hybrid TDOA-AOA case, HCO provides comparable performance to the hybrid generalized trust region subproblem (HGTRS) solution and is better than the hybrid successive unconstrained minimization (HSUM) solution in large noise region. Its computational complexity is lower than that of HGTRS. Simulations validate the performance of HCO achieves the CRB that the maximum likelihood estimator (MLE) attains if the noise is small, but the MLE deviates from CRB earlier.
基金financially supported by the National Key Research and Development Program of China(Grant No.2022YFC2806102)the National Natural Science Foundation of China(Grant Nos.52171287,52325107)+2 种基金High Tech Ship Research Project of Ministry of Industry and Information Technology(Grant Nos.2023GXB01-05-004-03,GXBZH2022-293)the Science Foundation for Distinguished Young Scholars of Shandong Province(Grant No.ZR2022JQ25)the Taishan Scholars Project(Grant No.tsqn201909063)。
文摘Leakages from subsea oil and gas equipment cause substantial economic losses and damage to marine ecosystem,so it is essential to locate the source of the leak.However,due to the complexity and variability of the marine environment,the signals collected by hydrophone contain a variety of noises,which makes it challenging to extract useful signals for localization.To solve this problem,a hydrophone denoising algorithm is proposed based on variational modal decomposition(VMD)with grey wolf optimization.First,the average envelope entropy is used as the fitness function of the grey wolf optimizer to find the optimal solution for the parameters K andα.Afterward,the VMD algorithm decomposes the original signal parameters to obtain the intrinsic mode functions(IMFs).Subsequently,the number of interrelationships between each IMF and the original signal was calculated,the threshold value was set,and the noise signal was removed to calculate the time difference using the valid signal obtained by reconstruction.Finally,the arrival time difference is used to locate the origin of the leak.The localization accuracy of the method in finding leaks is investigated experimentally by constructing a simulated leak test rig,and the effectiveness and feasibility of the method are verified.
文摘The electrical performance of radomes on high-speed aircraft can be influenced by the thermal and mechanical loads produced during high-speed flight,which can affect the detection dis-tance and accuracy of the guidance system.This paper presents a new method that uses the Finite Difference Time Domain(FDTD)method to calculate the electrical performance of radomes under Thermo-Mechanical-Electrical(TME)coupling.This method can accurately characterize the effects of material dielectric temperature drift and structural deformation on the electrical performance of the radome under flight conditions,enabling high-precision full-wave calculations of the broadband electrical performance of the radome.The method initiates by utilizing a Finite Element Grid Model(FE-GM)of the radome to sequentially acquire the radome's response temperature field and structural deformation field through thermal and mechanical simulations.Subsequently,spatial mapping techniques are developed to accurately incorporate the dielectric temperature drift and structural deformation of the radome into its Yee grid Electromagnetic(EM)simulation model.A verification case was designed to test the proposed method,and the results confirmed its high computational accuracy.Additionally,the effectiveness and necessity of the method were further demonstrated by analyzing the electrical performance of a fused silica ceramic radome used on a high-speed aircraft.
基金National Natural Science Foundation of China(No.61227003)National Program on Key Basic Research Program(973Program)(No.2013CB311804)
文摘Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localization based on group waves’ time difference information Firstly, extract the time difference corresponding to direct P wavers dominant frequency by utilizing its propagation characteristics. Secondly, construct TDOA model with non-prediction velocity and identify objective function of particle swarm optimization （PSO）. Afterwards, construct the initial particle swarm by using time difference information Finally, search the localization results in optimal solution space. The results of experimental verification show that the microseismic localization method proposed in this paper effectively enhances the localization accuracy of microseismic explosion source with positioning error less than 50 cm, which can satisfy the localization requirements of shallow burst point and has definite value for engineering application in underground space positioning field.
文摘The transmission and dispersive characteristics of slotline are calculated in this paper. The tail of Gaussion pulse is improved because a modified dispersive boundary condition (DBC) is adopted. It leads to a reduction in computer memory requirements and computational time. The computational domain is greatly reduced to enable performance in personal computer. At the same time because edges of a boundary and summits are treated well, the computational results is more accurate and more collector.
文摘The mode frequencies and the quality factors for the equilateral triangular resonator (ETR), the square resonator (SR) and the rhombus resonator (RR) are numerically calculated by the finite difference time domain technique and the Padé approximation. The numerical results show that the resonant modes confined in an equilateral triangular cavity have much higher quality factors than those in the square or the rhombus cavities. The modes in the ETR are totally confined in transverse direction while those in the SR and RR are only partly confined. For the ETR with the side length of 4μm and the refractive index of 3 2, the mode quality factor of about 5 5×10 3 at the wavelength of 1 55μm has been obtained.
文摘为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号,对其差值信号进行WVD分析,准确提取损伤反射信号到达时间;其次,通过ATDM建立各传感器间的距离差值关系,确定孔损伤位置中心并预测最大损伤半径,从而实现对孔损伤关键指标的识别;最后,通过数值模拟进一步验证该方法,结果表明,基于WVD/ATDM的损伤识别技术不仅能准确识别出孔损伤位置,而且能够有效地识别损伤区域面积。
文摘A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing the relations among wave vectors at every port of the network nodes was give Scattering characteristics and electromagnetic distributions of every node was calculated independently using FDTD A structure of irises in a waveguide was taken as numerical examples This hybrid method has more advantages than the traditional FDTD method which includes saving calculation time,saving memory spaces and being flexible in setting up FDTD grids
文摘The seasonal and source variations of flavonoid contents in Scutellariae Radix were investigated by using the materials collected at the same place in Liaoning Province, China, during three years, 1990～1992, and in seven other provinces in China. Four principal flavonoids in the plant roots, i.e., baicalin, baicalein, wogonin 7 O glucuronide and wogonin were analyzed by using a reversed phase chromatographic system with a chemically bonded ODS silica gel column and phosphate buffer methanol (68:32 and 1:1) as mobile phase. The contents of the four compounds combined in the herb collected at Chengde, Hebei Province are the highest. The results show that the best time for harvesting the roots in Liaoning Province is the end of August.
基金supported by the National High Technology Research and Development Program of China(863 Program)(No.2012AA7031015)
文摘This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to estimate the location of a target. Compared with the TDOA-only method which needs two steps, the proposed method estimates the target position more directly. The constrained total least squares（CTLS） technique is applied in this approach. It achieves the Cramer–Rao lower bound（CRLB） when the parameter measurements are subject to small Gaussian-distributed errors. Performance analysis and the CRLB of this approach are also studied. Theory verifies that the ATDOA method gets a lower CRLB than the TDOA-only method with the same TDOA measuring error. It can also be seen that the position of the target affects estimating precision.At the same time, the locations of transmitters affect the precision and its gradient direction.Compared with the TDOA, the ATDOA method can obtain more precise target position estimation.Furthermore, the proposed method accomplishes target position estimation with a single transmitter,while the TDOA-only method needs at least four transmitters to get the target position. Furthermore,the transmitters＇ position errors also affect precision of estimation regularly.
基金supported by the National Natural Science Foundation of China(6107210761271300)+4 种基金the Shaanxi Industry Surmount Foundation(2012K06-12)the Arm and Equipment Pre-research Foundationthe Fundamental Research Funds for the Central Universities of China(K0551302006K5051202045K50511020024)
文摘For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved perfectly by calculating the target position with the joint TDOA and AOA location.On the condition of rectangular coordinates,first of all,it figures out the radial range between target and reference stations,then calculates the location of the target.In the case of polar coordinates,first of all,it figures out the azimuth between target and reference stations,then figures out the radial range between target and reference stations,finally obtains the location of the target.Simultaneously,simulation analyses show that the theoretical analysis is correct,and the proposed methods also provide the application of the joint TDOA and AOA location algorithm with the theoretical basis.
基金supported by the National Natural Science Foundation of China(No.61671273)
文摘Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.
基金supported by the National Natural Science Foundation of China(No.61401513)
文摘The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference of Arrival （FDOA）, do not perform well under low Signal-to-Noise Ratio （SNR）, and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound （CRLB）. The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.
基金supported by the National High Technology Research and Development Program of China (863 Program) (2010AA7010422 2011AA7014061)
文摘By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.
基金supported by the National Natural Science Foundation of China(61401389)the Joint Fund of the Ministry of Education of China(6141A02033310)
文摘Micro-satellite cluster enables a whole new class of missions for communications, remote sensing, and scientific research for both civilian and military purposes. Synchronizing the time of the satellites in a cluster is important for both cluster sensing capabilities and its autonomous operating. However, the existing time synchronization methods are not suitable for microsatellite cluster, because it requires too many human interventions and occupies too much ground control resource. Although, data post-process may realize the equivalent time synchronization, it requires processing time and powerful computing ability on the ground, which cannot be implemented by cluster itself. In order to autonomously establish and maintain the time benchmark in a cluster, we propose a compact time difference compensation system（TDCS）, which is a kind of time control loop that dynamically adjusts the satellite reference frequency according to the time difference. Consequently, the time synchronization in the cluster can be autonomously achieved on-orbit by synchronizing the clock of other satellites to a chosen one＇s. The experimental result shows that the standard deviation of time synchronization is about 102 ps when the carrier to noise ratio（CNR） is 95 d BHz, and the standard deviation of corresponding frequency difference is approximately0.36 Hz.
