The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional...Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.展开更多
In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicti...In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.展开更多
A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relax...A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.展开更多
[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromat...[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromatography.Their chemical structures were elucidated on the basis of physicochemical properties and spectral data.[Results]Five compounds were isolated and identified as:di(2-ethylhexyl)phthalate(1),cinnamic anhydride(2),phthalic acid(3),citric acid(4),and syringaldehyde(5).[Conclusions]All compounds were isolated from this plant for the first time.展开更多
The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and propertie...The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.展开更多
Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characte...Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characteristics of C.gigas from different sources(ploidy,region,size,and culture mode),C.gigas from various ploidy(diploid and triploid),regions(Rushan,Off-site fattening,and Rongcheng),sizes(small,medium,and large)and culture modes(nearshore and offshore)were selected for comparative analyses.The nutritional components(moisture,protein,fat,and mineral),flavor substances(taste amino acids,nucleotides,and succinic acid),and functional indices(eicosapentaenoic acid(EPA),docosahexaenoic acid(DHA),and taurine)of C.gigas were determined.Principal component analysis(PCA)was used to comprehensively evaluate the oysters and investigate the variations in nutritional quality.The PCA results indicate that protein,essential fatty acids,selenium,zinc,taste amino acids,taurine,EPA,and DHA were core components contributing to 82.25%of the cumulative variance,providing a more comprehensive reflection of the nutrient composition of C.gigas.The extensive quality rankings for the C.gigas were as follows:diploid>triploid,Rushan>fattening>Rongcheng,medium>large>small,and offshore>nearshore.The score rank revealed that diploid oysters of medium-size from Rushan demonstrated superior nutritional quality compared to other tested samples.This is the first comprehensive and systematic investigation of C.gigas in northern China to reveal the feature of nutrients,flavor,and functional components.The study provided data support for the culture,consumption,processing,research,and nutritional quality improvement of oyster industry.展开更多
The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and redu...The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.展开更多
Predictive maintenance(PdM)is vital for ensuring the reliability,safety,and cost efficiency of heavyduty vehicle fleets.However,real-world sensor data are often highly imbalanced,noisy,and temporally irregular,posing ...Predictive maintenance(PdM)is vital for ensuring the reliability,safety,and cost efficiency of heavyduty vehicle fleets.However,real-world sensor data are often highly imbalanced,noisy,and temporally irregular,posing significant challenges to model robustness and deployment.Using multivariate time-series data from Scania trucks,this study proposes a novel PdM framework that integrates efficient feature summarization with cost-sensitive hierarchical classification.First,the proposed last_k_summary method transforms recent operational records into compact statistical and trend-based descriptors while preserving missingness,allowing LightGBM to leverage its inherent split rules without ad-hoc imputation.Then,a two-stage LightGBM framework is developed for fault detection and severity classification:Stage A performs safety-prioritized fault screening(normal vs.fault)with a false-negativeweighted objective,and Stage B refines the detected faults into four severity levels through a cascaded hierarchy of binary classifiers.Under the official cost matrix of the IDA Industrial Challenge,the framework achieves total misclassification costs of 36,113(validation)and 36,314(test),outperforming XGBoost and Bi-LSTM by 3.8%-13.5%while maintaining high recall for the safety-critical class(0.83 validation,0.77 test).These results demonstrate that the proposed approach not only improves predictive accuracy but also provides a practical and deployable PdM solution that reduces maintenance cost,enhances fleet safety,and supports data-driven decision-making in industrial environments.展开更多
In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of roc...In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.展开更多
We present two kinds of exact vector-soliton solutions for coupled nonlinear Schrodinger equations with time- varying interactions and time-varying harmonic potential. Using the variational approach, we investigate th...We present two kinds of exact vector-soliton solutions for coupled nonlinear Schrodinger equations with time- varying interactions and time-varying harmonic potential. Using the variational approach, we investigate the dynamics of the vector solitons. It is found that the two bright sol/tons oscillate about slightly and pass through each other around the equilibration state which means that they are stable under our modeh At the same time, we obtain the opposite situation for dark-dark solitons.展开更多
Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological s...Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological structures,the underlying micro-behaviors involving time-dependent deformation are poorly understood.For this,an abnormal phenomenon was observed where the axial and lateral creep deformations were mutually independent by a series of triaxial tests under constant stress and strain rate conditions.The significantly large lateral creep deformation implies that the creep process cannot be described in continuum mechanics regime.Herein,it is hypothesized that sliding mechanism of crystal cleavages dominates the lateral creep deformation in coral reef limestone.Then,approaches of polarizing microscope(PM)and scanning electronic microscope(SEM)are utilized to validate the hypothesis.It shows that the sliding behavior of crystal cleavages combats with conventional creep micro-mechanisms at certain condition.The former is sensitive to time and strain rate,and is merely activated in the creep regime.展开更多
Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.Thi...Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.This review systematically explores the therapeutic components of acupuncture,emphasizing the interplay between sensory nerve characteristics and neural signaling pathways.Key factors such as acupoint location,needling depth,stimulation intensity,retention time,and the induction of sensations(e.g.,Deqi)are analyzed for their roles in neural activation and clinical outcomes.The review highlights how variations in spinal segment targeting,tissue-specific receptor activation,and stimulation modalities(e.g.,manual acupuncture,electroacupuncture,moxibustion)influence therapeutic effects.Emerging evidence underscores the significance of ion channels,dermatomes,myotomes,and genespecific pathways in mediating systemic effects.Additionally,the differential roles of mechanical,thermal and nociceptive stimuli and the temporal dynamics of sensory and immune responses are addressed.While insights from animal models have advanced our understanding,their translation to clinical practice requires further investigation.This comprehensive review identifies critical parameters for optimizing acupuncture therapy,advocating for individualized treatment strategies informed by neuroanatomical and neurophysiological principles,ultimately enhancing its precision and efficacy in modern medicine.展开更多
Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects s...Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.展开更多
With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic...With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.展开更多
In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology bas...In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.展开更多
Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC...Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.展开更多
Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants h...Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.展开更多
Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high com...Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high computational complexity and insufficient capture of high-frequency phase aberration components,so we proposed a Principal-Component-Analysis-based method for representing phase aberrations.This paper discusses the factors influencing the accuracy of restoration,mainly including the sample space size and the sampling interval of D/r_(0),on the basis of characterizing phase aberrations by Principal Components(PCs).The experimental results show that a larger D/r_(0)sampling interval can ensure the generalization ability and robustness of the principal components in the case of a limited amount of original data,which can help to achieve high-precision deployment of the model in practical applications quickly.In the environment with relatively strong turbulence in the test set of D/r_(0)=24,the use of 34 terms of PCs can improve the corrected Strehl ratio(SR)from 0.007 to 0.1585,while the Strehl ratio of the light spot after restoration using 34 terms of ZPs is only 0.0215,demonstrating almost no correction effect.The results indicate that PCs can serve as a better alternative in representing and restoring the characteristics of atmospheric turbulence induced phase aberrations.These findings pave the way to use PCs of phase aberrations with fewer terms than traditional ZPs to achieve data dimensionality reduction,and offer a reference to accelerate and stabilize the model and deep learning based adaptive optics correction.展开更多
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
基金funding support from the National Natural Science Foundation of China(Nos.52304101 and 52204153)the China Postdoctoral Science Foundation(No.2023MD734215)+2 种基金the Youth Talent Support Program of Xi’an Association for Science and Technology(No.959202413070)the Key Research and Development Program of Shaanxi(No.2023-LL-QY-07)the Key Research and Development Program of Zhejiang(No.2023C03182).
文摘Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.
基金funded by the National Natural Science Foundation of China(Nos.52004098,U24B2041,and 52274079)the Key Research and Development Program of Henan Province(No.251111320400)+1 种基金the Key Research Project Plan for Higher Education Institutions in Henan Province(Nos.24A570006 and 25A570002)the Scientific and Technological Research Project in Henan Province(No.242102320061).
文摘In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.
基金support of her postdoctoral research at the GFZ Helmholtz Centre for Geosciences.P.Pan acknowledges the financial support of the National Natural Science Foundation of China(Grant No.52339001)H.Hofmann and Y.Ji acknowledge the financial support of the Helmholtz Association's Initiative and Networking Fund for the Helmholtz Young Investigator Group ARES(contract number VH-NG-1516).
文摘A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.
基金Supported by Jiangxi Education Department Project(GJJ201533)University-level Project of Gannan Medical University(YB201902).
文摘[Objectives]This study was conducted to isolate and identify the components from stems of Polyalthia plagioneura.[Methods]The compounds were isolated and purified by silica gel column,Sephadex LH-20,and C_(18) chromatography.Their chemical structures were elucidated on the basis of physicochemical properties and spectral data.[Results]Five compounds were isolated and identified as:di(2-ethylhexyl)phthalate(1),cinnamic anhydride(2),phthalic acid(3),citric acid(4),and syringaldehyde(5).[Conclusions]All compounds were isolated from this plant for the first time.
基金financially supported by the National Key Research and Development Program of China(Nos.2022YFB3709300,2021YFB3701000)the National Natural Science Foundation of China(Nos.52271090,52071036,U2037601,U21A2048)+1 种基金Chongqing Science and Technology Commission,China(Nos.CSTB2022TIAD-KPX0021,CSTC2024YCJHBGZXM0164,CSTB2024TIAD-KPX0001)the Fundamental Research Funds for the Central Universities,China(No.2022CDJDX-002)。
文摘The commercial AM60(Mg−6Al−0.3Mn)die-casting alloy was modified through Mn,Ce,and La micro-alloying,each at a content below 0.2 wt.%.SEM,TEM,and Micro-CT were employed to characterize the microstructures and properties of AM60 based alloys.AM60-0.2La alloy showed excellent mechanical properties.The ultimate tensile strength,yield strength,and elongation of(288.0±1.7)MPa,(158.0±1.0)MPa,and(22.0±3.0)%were achieved in AM60-0.2La alloy.Besides,AM60-0.2La alloy exhibited the best corrosion resistance(0.29 mm/a)and fluidity among the investigated four alloys.The excellent mechanical properties and corrosion resistance are mainly attributed to the grain refinement strengthening,low porosity,and low content of large shrinkage porosity,promising for super-sized integrated automotive components.
基金Supported by the Central Public-interest Scientific Institution Basal Research Fund,YSFRI,CAFS(No.20603022024016)the Central Public-interest Scientific Institution Basal Research Fund,CAFS(Nos.2023TD52,2023TD76)the earmarked fund for CARS(No.CARS-49)。
文摘Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characteristics of C.gigas from different sources(ploidy,region,size,and culture mode),C.gigas from various ploidy(diploid and triploid),regions(Rushan,Off-site fattening,and Rongcheng),sizes(small,medium,and large)and culture modes(nearshore and offshore)were selected for comparative analyses.The nutritional components(moisture,protein,fat,and mineral),flavor substances(taste amino acids,nucleotides,and succinic acid),and functional indices(eicosapentaenoic acid(EPA),docosahexaenoic acid(DHA),and taurine)of C.gigas were determined.Principal component analysis(PCA)was used to comprehensively evaluate the oysters and investigate the variations in nutritional quality.The PCA results indicate that protein,essential fatty acids,selenium,zinc,taste amino acids,taurine,EPA,and DHA were core components contributing to 82.25%of the cumulative variance,providing a more comprehensive reflection of the nutrient composition of C.gigas.The extensive quality rankings for the C.gigas were as follows:diploid>triploid,Rushan>fattening>Rongcheng,medium>large>small,and offshore>nearshore.The score rank revealed that diploid oysters of medium-size from Rushan demonstrated superior nutritional quality compared to other tested samples.This is the first comprehensive and systematic investigation of C.gigas in northern China to reveal the feature of nutrients,flavor,and functional components.The study provided data support for the culture,consumption,processing,research,and nutritional quality improvement of oyster industry.
基金the supports of the National Natural Science Foundation of China(Grant No.52375378)。
文摘The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.
基金supported by the GRRC program of Gyeonggi province[GRRC KGU 2023-B01,Research on Intelligent Industrial Data Analytics].
文摘Predictive maintenance(PdM)is vital for ensuring the reliability,safety,and cost efficiency of heavyduty vehicle fleets.However,real-world sensor data are often highly imbalanced,noisy,and temporally irregular,posing significant challenges to model robustness and deployment.Using multivariate time-series data from Scania trucks,this study proposes a novel PdM framework that integrates efficient feature summarization with cost-sensitive hierarchical classification.First,the proposed last_k_summary method transforms recent operational records into compact statistical and trend-based descriptors while preserving missingness,allowing LightGBM to leverage its inherent split rules without ad-hoc imputation.Then,a two-stage LightGBM framework is developed for fault detection and severity classification:Stage A performs safety-prioritized fault screening(normal vs.fault)with a false-negativeweighted objective,and Stage B refines the detected faults into four severity levels through a cascaded hierarchy of binary classifiers.Under the official cost matrix of the IDA Industrial Challenge,the framework achieves total misclassification costs of 36,113(validation)and 36,314(test),outperforming XGBoost and Bi-LSTM by 3.8%-13.5%while maintaining high recall for the safety-critical class(0.83 validation,0.77 test).These results demonstrate that the proposed approach not only improves predictive accuracy but also provides a practical and deployable PdM solution that reduces maintenance cost,enhances fleet safety,and supports data-driven decision-making in industrial environments.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1700201)the National Natural Science Foundation of China(Nos.U2034206,51974014 and 51574014)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011631)the National Key Research and Development Project of China(No.2022YFC3004601)。
文摘In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.
基金Projects supported by the National Natural Science Foundation of China (Grant Nos. 10775049 and 10375022)
文摘We present two kinds of exact vector-soliton solutions for coupled nonlinear Schrodinger equations with time- varying interactions and time-varying harmonic potential. Using the variational approach, we investigate the dynamics of the vector solitons. It is found that the two bright sol/tons oscillate about slightly and pass through each other around the equilibration state which means that they are stable under our modeh At the same time, we obtain the opposite situation for dark-dark solitons.
基金supported by the National Natural Science Foundation of China(Grant Nos.41877267,41877260)the Priority Research Program of the Chinese Academy of Science(Grant No.XDA13010201).
文摘Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological structures,the underlying micro-behaviors involving time-dependent deformation are poorly understood.For this,an abnormal phenomenon was observed where the axial and lateral creep deformations were mutually independent by a series of triaxial tests under constant stress and strain rate conditions.The significantly large lateral creep deformation implies that the creep process cannot be described in continuum mechanics regime.Herein,it is hypothesized that sliding mechanism of crystal cleavages dominates the lateral creep deformation in coral reef limestone.Then,approaches of polarizing microscope(PM)and scanning electronic microscope(SEM)are utilized to validate the hypothesis.It shows that the sliding behavior of crystal cleavages combats with conventional creep micro-mechanisms at certain condition.The former is sensitive to time and strain rate,and is merely activated in the creep regime.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2020R1C1C1004107)。
文摘Acupuncture,a therapeutic practice rooted in traditional Chinese medicine and integrated with modern neuroscience,achieves its effects by stimulating sensory nerves at specific anatomical points known as acupoints.This review systematically explores the therapeutic components of acupuncture,emphasizing the interplay between sensory nerve characteristics and neural signaling pathways.Key factors such as acupoint location,needling depth,stimulation intensity,retention time,and the induction of sensations(e.g.,Deqi)are analyzed for their roles in neural activation and clinical outcomes.The review highlights how variations in spinal segment targeting,tissue-specific receptor activation,and stimulation modalities(e.g.,manual acupuncture,electroacupuncture,moxibustion)influence therapeutic effects.Emerging evidence underscores the significance of ion channels,dermatomes,myotomes,and genespecific pathways in mediating systemic effects.Additionally,the differential roles of mechanical,thermal and nociceptive stimuli and the temporal dynamics of sensory and immune responses are addressed.While insights from animal models have advanced our understanding,their translation to clinical practice requires further investigation.This comprehensive review identifies critical parameters for optimizing acupuncture therapy,advocating for individualized treatment strategies informed by neuroanatomical and neurophysiological principles,ultimately enhancing its precision and efficacy in modern medicine.
基金funded by the National Natural Science Foundation of China Youth Fund(Grant No.62304022)Science and Technology on Electromechanical Dynamic Control Laboratory(China,Grant No.6142601012304)the 2022e2024 China Association for Science and Technology Innovation Integration Association Youth Talent Support Project(Grant No.2022QNRC001).
文摘Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.
基金financially supported by the Scientific Research Foundation of North China University of Technology(Grant Nos.11005136024XN147-87 and 110051360024XN151-86).
文摘With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.
基金financially supported by National Key R&D Program(2021YFF0701905)。
文摘In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.
基金funding from the National Natural Science Foundation of China (Grant No.42277175)the pilot project of cooperation between the Ministry of Natural Resources and Hunan Province“Research and demonstration of key technologies for comprehensive remote sensing identification of geological hazards in typical regions of Hunan Province” (Grant No.2023ZRBSHZ056)the National Key Research and Development Program of China-2023 Key Special Project (Grant No.2023YFC2907400).
文摘Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.
基金supported by the key project at the central government level:The ability establishment of sustainable use for valuable Chinese medicine resources(Grant number 2060302)the National Natural Science Foundation of China(Grant number 82373982,82173929).
文摘Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.
文摘Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high computational complexity and insufficient capture of high-frequency phase aberration components,so we proposed a Principal-Component-Analysis-based method for representing phase aberrations.This paper discusses the factors influencing the accuracy of restoration,mainly including the sample space size and the sampling interval of D/r_(0),on the basis of characterizing phase aberrations by Principal Components(PCs).The experimental results show that a larger D/r_(0)sampling interval can ensure the generalization ability and robustness of the principal components in the case of a limited amount of original data,which can help to achieve high-precision deployment of the model in practical applications quickly.In the environment with relatively strong turbulence in the test set of D/r_(0)=24,the use of 34 terms of PCs can improve the corrected Strehl ratio(SR)from 0.007 to 0.1585,while the Strehl ratio of the light spot after restoration using 34 terms of ZPs is only 0.0215,demonstrating almost no correction effect.The results indicate that PCs can serve as a better alternative in representing and restoring the characteristics of atmospheric turbulence induced phase aberrations.These findings pave the way to use PCs of phase aberrations with fewer terms than traditional ZPs to achieve data dimensionality reduction,and offer a reference to accelerate and stabilize the model and deep learning based adaptive optics correction.
