Although conventional reverse time migration can be perfectly applied to structural imaging it lacks the capability of enabling detailed delineation of a lithological reservoir due to irregular illumination. To obtain...Although conventional reverse time migration can be perfectly applied to structural imaging it lacks the capability of enabling detailed delineation of a lithological reservoir due to irregular illumination. To obtain reliable reflectivity of the subsurface it is necessary to solve the imaging problem using inversion. The least-square reverse time migration （LSRTM） （also known as linearized refleetivity inversion） aims to obtain relatively high-resolution amplitude preserving imaging by including the inverse of the Hessian matrix. In practice, the conjugate gradient algorithm is proven to be an efficient iterative method for enabling use of LSRTM. The velocity gradient can be derived from a cross-correlation between observed data and simulated data, making LSRTM independent of wavelet signature and thus more robust in practice. Tests on synthetic and marine data show that LSRTM has good potential for use in reservoir description and four-dimensional （4D） seismic images compared to traditional RTM and Fourier finite difference （FFD） migration. This paper investigates the first order approximation of LSRTM, which is also known as the linear Born approximation. However, for more complex geological structures a higher order approximation should be considered to improve imaging quality.展开更多
Temporal-spatial cross-correlation analysis of non-stationary wind speed time series plays a crucial role in wind field reconstruction as well as in wind pattern recognition.Firstly,the near-surface wind speed time se...Temporal-spatial cross-correlation analysis of non-stationary wind speed time series plays a crucial role in wind field reconstruction as well as in wind pattern recognition.Firstly,the near-surface wind speed time series recorded at different locations are studied using the detrended fluctuation analysis(DFA),and the corresponding scaling exponents are larger than 1.This indicates that all these wind speed time series have non-stationary characteristics.Secondly,concerning this special feature( i.e.,non-stationarity)of wind signals,a cross-correlation analysis method,namely detrended cross-correlation analysis(DCCA) coefficient,is employed to evaluate the temporal-spatial cross-correlations between non-stationary time series of different anemometer pairs.Finally,experiments on ten wind speed data synchronously collected by the ten anemometers with equidistant arrangement illustrate that the method of DCCA cross-correlation coefficient can accurately analyze full-scale temporal-spatial cross-correlation between non-stationary time series and also can easily identify the seasonal component,while three traditional cross-correlation techniques(i.e.,Pearson coefficient,cross-correlation function,and DCCA method) cannot give us these information directly.展开更多
This paper shows the Fokker-Planck equation of a dynamical system driven by coloured cross-correlated white noises in the absence and presence of a small external force. Based on the Fokker-Planck equation and the def...This paper shows the Fokker-Planck equation of a dynamical system driven by coloured cross-correlated white noises in the absence and presence of a small external force. Based on the Fokker-Planck equation and the definition of Shannon＇s information entropy, the time dependence of entropy flux and entropy production can be calculated. The present results can be used to explain the extremal behaviour of time dependence of entropy flux and entropy production in view of the dissipative parameter γ of the system, coloured cross-correlation time τ and coloured cross-correlation strength λ.展开更多
Seismic monitoring using ocean bottom seismometers（OBS） is an efficient method for investigating earthquakes in mid-ocean ridge far away from land. Clock synchronization among the OBSs is difficult without direct co...Seismic monitoring using ocean bottom seismometers（OBS） is an efficient method for investigating earthquakes in mid-ocean ridge far away from land. Clock synchronization among the OBSs is difficult without direct communication because electromagnetic signals cannot propagate efficiently in water. Time correction can be estimated through global positioning system（GPS） synchronization if clock drift is linear before and after the deployment. However, some OBSs in the experiments at the southwest Indian ridge（SWIR） on the Chinese DY125-34 cruise had not been re-synchronized from GPS after recovery. So we attempted to estimate clock drift between each station pairs using time symmetry analysis（TSA） based on ambient noise cross-correlation. We tested the feasibility of the TSA method by analyzing daily noise cross-correlation functions（NCFs） that extract from the data of another OBS experiment on the Chinese DY125-40 cruise with known clock drift and the same deployment site. The results suggest that the NCFs＇ travel time of surface wave between any two stations are symmetrical and have an opposite growing direction with the date. The influence of different band-pass filters,different components and different normalized methods was discussed. The TSA method appeared to be optimal for the hydrophone data within the period band of 2–5 s in dozens of km-scale interstation distances. A significant clock drift of ~2 s was estimated between OBSs sets through linear regression during a 108-d deployment on the Chinese cruise DY125-34. Time correction of the OBS by the ambient noise cross-correlation was demonstrated as a practical approach with the appropriate parameters in case of no GPS re-synchronization.展开更多
To address the issue of low measurement accuracy caused by noise interference in the acquisition of low fluid flow rate signals with ultrasonic Doppler flow meters,a novel signal processing algorithm that combines ens...To address the issue of low measurement accuracy caused by noise interference in the acquisition of low fluid flow rate signals with ultrasonic Doppler flow meters,a novel signal processing algorithm that combines ensemble empirical mode decomposition(EEMD)and cross-correlation algorithm was proposed.Firstly,a fast Fourier transform(FFT)spectrum analysis was utilized to ascertain the frequency range of the signal.Secondly,data acquisition was conducted at an appropriate sampling frequency,and the acquired Doppler flow rate signal was then decomposed into a series of intrinsic mode functions(IMFs)by EEMD.Subsequently,these decomposed IMFs were recombined based on their energy entropy,and then the noise of the recombined Doppler flow rate signal was removed by cross-correlation filtering.Finally,an ideal ultrasonic Doppler flow rate signal was extracted.Simulation and experimental verification show that the proposed Doppler flow signal processing method can effectively enhance the signal-to-noise ratio(SNR)and extend the lower limit of measurement of the ultrasonic Doppler flow meter.展开更多
The improved cross-correlation algorithm for the strain demodulation of Vernier-effect-based optical fiber sensor(VE-OFS)is proposed in this article.The algorithm identifies the most similar spectrum to the measured o...The improved cross-correlation algorithm for the strain demodulation of Vernier-effect-based optical fiber sensor(VE-OFS)is proposed in this article.The algorithm identifies the most similar spectrum to the measured one from the database of the collected spectra by employing the cross-correlation operation,subsequently deriving the predicted value via weighted calculation.As the algorithm uses the complete information in the measured raw spectrum,more accurate results and larger measurement range can be obtained.Additionally,the improved cross-correlation algorithm also has the potential to improve the measurement speed compared to current standards due to the possibility for the collection using low sampling rate.This work presents an important algorithm towards a simpler,faster way to improve the demodulation performance of VE-OFS.展开更多
Traditional cross-correlation algorithms are prone to time-of-flight(TOF)calculation errors under conditions of strong noise interference and complex temperature gradients,resulting in a decline in the accuracy of ult...Traditional cross-correlation algorithms are prone to time-of-flight(TOF)calculation errors under conditions of strong noise interference and complex temperature gradients,resulting in a decline in the accuracy of ultrasonic temperature measurement.To this end,this paper proposes an ultrasonic temperature measurement method that combines YOLOv11 target detection with energy-type weighted cross-correlation algorithm.The YOLOv11 model is utilized to conduct target detection and key area positioning on the ultrasonic signal waveform diagram,automatically identifying characteristic waveforms such as node waves and end face waves,and achieving adaptive extraction of the effective signal interval.Further introduce the energy-based weighted cross-correlation algorithm.Based on the signal energy distribution,the cross-correlation results are weighted and processed to enhance the main wave response and suppress noise interference.Experiments show that the YOLOv11 model has high detection accuracy(Precision=0.987,Recall=0.958,mAP@50=0.988);The proposed method maintains the stability of time delay estimation under strong noise and high temperature(>1200℃),with the average time delay error reduced by approximately 35%to 50%compared to traditional algorithms.This verifies its high robustness and temperature measurement accuracy in complex environments,and it has a promising engineering application prospect.展开更多
The temperature change and rate of CO2 change are correlated with a time lag, as reported in a previous paper. The correlation was investigated by calculating a correlation coefficient r of these changes for selected ...The temperature change and rate of CO2 change are correlated with a time lag, as reported in a previous paper. The correlation was investigated by calculating a correlation coefficient r of these changes for selected ENSO events in this study. Annual periodical increases and decreases in the CO2 concentration were considered, with a regular pattern of minimum values in August and maximum values in May each year. An increased deviation in CO2 and temperature was found in response to the occurrence of El Niño, but the increase in CO2 lagged behind the change in temperature by 5 months. This pattern was not observed for La Niña events. An increase in global CO2 emissions and a subsequent increase in global temperature proposed by IPCC were not observed, but an increase in global temperature, an increase in soil respiration, and a subsequent increase in global CO2 emissions were noticed. This natural process can be clearly detected during periods of increasing temperature specifically during El Niño events. The results cast strong doubts that anthropogenic CO2 is the cause of global warming.展开更多
Free surface elevation time series of breaking water waves were measured in a laboratory flume. This was done in order to analyze changes in wave characteristics as the waves propagated from deep water to the shore. A...Free surface elevation time series of breaking water waves were measured in a laboratory flume. This was done in order to analyze changes in wave characteristics as the waves propagated from deep water to the shore. A pair of parallel- wire capacitive wave gages was used to simultaneously measure free surface elevations at different positions along the flume. One gage was kept fixed near the wave generator to provide a reference while the other was moved in steps of 0.1 m in the vicinity of the break point. Data from these two wave gages measured at the same time constitute station-to-station free surface elevation time series. Fast Fourier Transform (FFT) based cross-correlation techniques were employed to determine the time lag between each pair of the time series. The time lag was used to compute the phase shift between the reference wave gage and that at various points along the flume. Phase differences between two points spaced 0.1 m apart were used to calculate local mean wave phase velocity for a point that lies in the middle. Results show that moving from deep water to shallow water, the measured mean phase velocity decreases almost linearly from about 1.75 m/s to about 1.50 m/s at the break point. Just after the break point, wave phase velocity abruptly increases to a maximum value of 1.87 m/s observed at a position 30 cm downstream of the break point. Thereafter, the phase velocity decreases, reaching a minimum of about 1.30 m/s.展开更多
Detecting coupling pattern between elements in a complex system is a basic task in data-driven analysis. The trajectory for each specific element is a cooperative result of its intrinsic dynamic, its couplings with ot...Detecting coupling pattern between elements in a complex system is a basic task in data-driven analysis. The trajectory for each specific element is a cooperative result of its intrinsic dynamic, its couplings with other elements, and the environment. It is subsequently composed of many components, only some of which take part in the couplings. In this paper we present a framework to detect the component correlation pattern. Firstly, the interested trajectories are decomposed into components by using decomposing methods such as the Fourier expansion and the Wavelet transformation. Secondly, the cross-correlations between the components are calculated, resulting into a component cross-correlation matrix(network).Finally, the dominant structure in the network is identified to characterize the coupling pattern in the system. Several deterministic dynamical models turn out to be characterized with rich structures such as the clustering of the components. The pattern of correlation between respiratory(RESP) and ECG signals is composed of five sub-clusters that are mainly formed by the components in ECG signal. Interestingly, only 7 components from RESP(scattered in four sub-clusters) take part in the realization of coupling between the two signals.展开更多
This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relativ...This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.展开更多
A complex system contains generally many elements that are networked by their couplings.The time series of output records of the system's dynamical process is subsequently a cooperative result of the couplings.Dis...A complex system contains generally many elements that are networked by their couplings.The time series of output records of the system's dynamical process is subsequently a cooperative result of the couplings.Discovering the coupling structure stored in the time series is an essential task in time series analysis.However,in the currently used methods for time series analysis the structural information is merged completely by the procedure of statistical average.We propose a concept called mode network to preserve the structural information.Firstly,a time series is decomposed into intrinsic mode functions and residue by means of the empirical mode decomposition solution.The mode functions are employed to represent the contributions from different elements of the system.Each mode function is regarded as a mono-variate time series.All the mode functions form a multivariate time series.Secondly,the co-occurrences between all the mode functions are then used to construct a threshold network(mode network)to display the coupling structure.This method is illustrated by investigating gait time series.It is found that a walk trial can be separated into three stages.In the beginning stage,the residue component dominates the series,which is replaced by the mode function numbered M14 with peaks covering^680 strides(~12 min)in the second stage.In the final stage more and more mode functions join into the backbone.The changes of coupling structure are mainly induced by the co-occurrent strengths of the mode functions numbered as M11,M12,M13,and M14,with peaks covering 200-700 strides.Hence,the mode network can display the rich and dynamical patterns of the coupling structure.This approach can be extended to investigate other complex systems such as the oil price and the stock market price series.展开更多
Hard disk drives(HDDs)serve as the primary storage devices in modern data centers.Once a failure occurs,it often leads to severe data loss,significantly degrading the reliability of storage systems.Numerous studies ha...Hard disk drives(HDDs)serve as the primary storage devices in modern data centers.Once a failure occurs,it often leads to severe data loss,significantly degrading the reliability of storage systems.Numerous studies have proposed machine learning-based HDD failure prediction models.However,the Self-Monitoring,Analysis,and Reporting Technology(SMART)attributes differ across HDD manufacturers.We define hard drives of the same brand and model as homogeneous HDD groups,and those from different brands or models as heterogeneous HDD groups.In practical engineering scenarios,a data center is often composed of a heterogeneous population of HDDs,spanning multiple vendors and models.Existing research predominantly focuses on homogeneous datasets,ignoring the model’s generalization capability across heterogeneous HDDs.As a result,HDD models with limited samples often suffer from poor training effectiveness and prediction performance.To address this issue,we investigate generalizable SMART predictors across heterogeneous HDD groups.By extracting time-series features within a fixed sliding time window,we propose a Heterogeneous Disk Failure Prediction Method based on Time Series Features(HDFPM)framework.This method is adaptable to HDD models with limited sample sizes,thereby enhancing its applicability and robustness across diverse drive populations.Experimental results show that the proposed model achieves an F1-score of 0.9518 when applied to two different Seagate HDD models,while maintaining the False Positive Rate(FPR)below 1%.After incorporating the Complexity-Ratio Dynamic Time Warping(CDTW)based feature enhancement method,the best prediction model achieves a True Positive Rate(TPR)of up to 0.93 between the two models.For next-day failure prediction across various Seagate models,the model achieves an F1-score of up to 0.8792.Moreover,the experimental results also show that within the same brand,the higher the proportion of shared SMART attributes across different models,the better the prediction performance.In addition,HDFPMdemonstrates the best stability andmost significant performance in heterogeneous environments.展开更多
Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensi...Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensive OCCUS project. A potential high-resolution method for the aforementioned purpose lies in the full-waveform inversion(FWI) of time-lapse seismic data. However, practical applications of FWI are severely restricted by the well-known cycle-skipping problem. A new time-lapse FWI method using cross-correlation-based dynamic time warping(CDTW) is proposed to detect changes in the subsurface property due to carbon dioxide(CO_(2)) injection and address the aforementioned issue. The proposed method, namely CDTW, which combines the advantages of cross-correlation and dynamic time warping, is employed in the automatic estimation of the discrepancy between the seismic signals simulated using the baseline/initial model and those acquired. The proposed FWI method can then back-project the estimated discrepancy to the subsurface space domain, thereby facilitating retrieval of the induced subsurface property change by taking the difference between the inverted baseline and monitor models. Numerical results on pairs of signals prove that CDTW can obtain reliable shifts under amplitude modulation and noise contamination conditions. The performance of CDTW substantially outperforms that of the conventional dynamic time warping method. The proposed time-lapse fullwaveform inversion(FWI) method is applied to the Frio-2 CO_(2) storage model. The baseline and monitor models are inverted from the corresponding time-lapse seismic data. The changes in velocity due to CO_(2) injection are reconstructed by the difference between the baseline and the monitor models.展开更多
This research is focused on the calculation of a reasonable detonator delay time for realizing cut blast vibration control.First,the viscoelastic rock mass parameters corresponding to the engineering rock mass quality...This research is focused on the calculation of a reasonable detonator delay time for realizing cut blast vibration control.First,the viscoelastic rock mass parameters corresponding to the engineering rock mass quality classification were determined based on wave theory of Kelvin medium.Then,a calculation model was obtained for the millisecond-delay cut blast vibration in Kelvin media using the Starfield charge superposition principle.Further,the influence of the delay time on the cut blast vibration was quantitatively analyzed and a method for calculating the reasonable cut blasting millisecond delay time is proposed according to the principle of dimensional analysis.Finally,field tests were used to verify the applicability of the method.The results show that 5 ms to 20 ms is a better detonator delay time range and cut blasting vibration can be effectively controlled using the delay time calculated by the calculation model described in this paper.展开更多
Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative con...Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative control guidance law(ITCCG)that combines the optimal error dynamics with an improved adaptive cubature Kalman filter(IACKF)algorithm.First,a terminal impact time feedback term is introduced into proportional navigation guidance based on the relative virtual guidance model,and terminal time control is achieved through optimal error dynamics.Then,the Huber loss function is used to reduce the impact of measurement outliers,and the diagonal decomposition is applied to address the issue of non-positive definite matrices that cannot undergo Cholesky decomposition.Finally,the ITCCG and IACKF algorithms combined achieve multi-UAV time-cooperated guidance based on maneuvering target state estimation.Simulation results show that the proposed algorithm effectively reduces the target state estimation error and achieves cooperative guidance within the desired time frame.展开更多
Severe trauma often involves complex injuries,leading to high disability and fatality rates.Effective treatment requires prompt and coordinated efforts across multiple disciplines to enhance success rates.Time-based c...Severe trauma often involves complex injuries,leading to high disability and fatality rates.Effective treatment requires prompt and coordinated efforts across multiple disciplines to enhance success rates.Time-based chain rescue is crucial in managing severe trauma.A patient with chest and abdominal injuries and hemorrhagic shock was transferred from an ambulance to our hospital.Our trauma team-initiated pre-hospital first aid,utilized an emergency green channel,and conducted rapid ultrasound,collaborating across disciplines.The patient eventually recovered and was discharged.展开更多
UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple...UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple UAVs-mounted IRS(U-IRS),where the data from ground SNs are transmitted to the FC.In practice,energy efficiency(EE)and mission completion time are crucial metrics for evaluating system performance and operational costs.Recognizing their importance during data collection,we formulate a multi-objective optimization problem to maximize EE and minimize total mission completion time simultaneously.To characterize this tradeoff while considering optimization objective consistency,we construct an optimization problem that minimizes the weighted sum of the total mission completion time and the reciprocal of EE.Due to the non-convex nature of the formulated problem,obtaining optimal solutions is generally challenging.To tackle this issue,we decompose it into three subproblems:UAV-SN association,number of reflecting elements allocation,andUAVtrajectory optimization.An iterative algorithmcombining genetic algorithm,CS-BJ algorithm,and successive convex approximation technique is proposed to solve these sub-problems.Simulation results demonstrate that when the transmitted data amount is 10 and 30Mbits,compared to the static collection benchmark(the UAV hovers directly above each SN),the EE of the proposed method improves by more than 10.4% and 5.2%,while the total mission completion time is reduced by more than 5.4% and 3.3%,respectively.展开更多
基金sponsored by The National Natural Science Fund(No.41574098)Sinopec Geophysical Key Laboratory Open Fund(No.wtyjy-wx2016-04-2)
文摘Although conventional reverse time migration can be perfectly applied to structural imaging it lacks the capability of enabling detailed delineation of a lithological reservoir due to irregular illumination. To obtain reliable reflectivity of the subsurface it is necessary to solve the imaging problem using inversion. The least-square reverse time migration （LSRTM） （also known as linearized refleetivity inversion） aims to obtain relatively high-resolution amplitude preserving imaging by including the inverse of the Hessian matrix. In practice, the conjugate gradient algorithm is proven to be an efficient iterative method for enabling use of LSRTM. The velocity gradient can be derived from a cross-correlation between observed data and simulated data, making LSRTM independent of wavelet signature and thus more robust in practice. Tests on synthetic and marine data show that LSRTM has good potential for use in reservoir description and four-dimensional （4D） seismic images compared to traditional RTM and Fourier finite difference （FFD） migration. This paper investigates the first order approximation of LSRTM, which is also known as the linear Born approximation. However, for more complex geological structures a higher order approximation should be considered to improve imaging quality.
基金Projects(61271321,61573253,61401303)supported by the National Natural Science Foundation of ChinaProject(14ZCZDSF00025)supported by Tianjin Key Technology Research and Development Program,China+1 种基金Project(13JCYBJC17500)supported by Tianjin Natural Science Foundation,ChinaProject(20120032110068)supported by Doctoral Fund of Ministry of Education of China
文摘Temporal-spatial cross-correlation analysis of non-stationary wind speed time series plays a crucial role in wind field reconstruction as well as in wind pattern recognition.Firstly,the near-surface wind speed time series recorded at different locations are studied using the detrended fluctuation analysis(DFA),and the corresponding scaling exponents are larger than 1.This indicates that all these wind speed time series have non-stationary characteristics.Secondly,concerning this special feature( i.e.,non-stationarity)of wind signals,a cross-correlation analysis method,namely detrended cross-correlation analysis(DCCA) coefficient,is employed to evaluate the temporal-spatial cross-correlations between non-stationary time series of different anemometer pairs.Finally,experiments on ten wind speed data synchronously collected by the ten anemometers with equidistant arrangement illustrate that the method of DCCA cross-correlation coefficient can accurately analyze full-scale temporal-spatial cross-correlation between non-stationary time series and also can easily identify the seasonal component,while three traditional cross-correlation techniques(i.e.,Pearson coefficient,cross-correlation function,and DCCA method) cannot give us these information directly.
基金Project supported by the National Natural Science Foundation of China （Grant No 10472091 and 10332030） and Natural Science Foundation of Shaanxi Province, China （Grant No 2003A03）. The author gratefully acknowledges the support of Youth for NPU Teachers Scientific and Technological Innovation Foundation.
文摘This paper shows the Fokker-Planck equation of a dynamical system driven by coloured cross-correlated white noises in the absence and presence of a small external force. Based on the Fokker-Planck equation and the definition of Shannon＇s information entropy, the time dependence of entropy flux and entropy production can be calculated. The present results can be used to explain the extremal behaviour of time dependence of entropy flux and entropy production in view of the dissipative parameter γ of the system, coloured cross-correlation time τ and coloured cross-correlation strength λ.
基金China Ocean Mineral Resources R&D Association Major Project under contract No.DY135-S1-01the National Natural Science Foundation of China under contract Nos 41506078,41706042 and 41522404the Basic Research Foundation of Second Institute of Oceanography,SOA under contract No.JG0608
文摘Seismic monitoring using ocean bottom seismometers（OBS） is an efficient method for investigating earthquakes in mid-ocean ridge far away from land. Clock synchronization among the OBSs is difficult without direct communication because electromagnetic signals cannot propagate efficiently in water. Time correction can be estimated through global positioning system（GPS） synchronization if clock drift is linear before and after the deployment. However, some OBSs in the experiments at the southwest Indian ridge（SWIR） on the Chinese DY125-34 cruise had not been re-synchronized from GPS after recovery. So we attempted to estimate clock drift between each station pairs using time symmetry analysis（TSA） based on ambient noise cross-correlation. We tested the feasibility of the TSA method by analyzing daily noise cross-correlation functions（NCFs） that extract from the data of another OBS experiment on the Chinese DY125-40 cruise with known clock drift and the same deployment site. The results suggest that the NCFs＇ travel time of surface wave between any two stations are symmetrical and have an opposite growing direction with the date. The influence of different band-pass filters,different components and different normalized methods was discussed. The TSA method appeared to be optimal for the hydrophone data within the period band of 2–5 s in dozens of km-scale interstation distances. A significant clock drift of ~2 s was estimated between OBSs sets through linear regression during a 108-d deployment on the Chinese cruise DY125-34. Time correction of the OBS by the ambient noise cross-correlation was demonstrated as a practical approach with the appropriate parameters in case of no GPS re-synchronization.
基金supported by National Natural Science Foundation of China(No.61973234)Tianjin Science and Technology Plan Project(No.22YDTPJC00090)。
文摘To address the issue of low measurement accuracy caused by noise interference in the acquisition of low fluid flow rate signals with ultrasonic Doppler flow meters,a novel signal processing algorithm that combines ensemble empirical mode decomposition(EEMD)and cross-correlation algorithm was proposed.Firstly,a fast Fourier transform(FFT)spectrum analysis was utilized to ascertain the frequency range of the signal.Secondly,data acquisition was conducted at an appropriate sampling frequency,and the acquired Doppler flow rate signal was then decomposed into a series of intrinsic mode functions(IMFs)by EEMD.Subsequently,these decomposed IMFs were recombined based on their energy entropy,and then the noise of the recombined Doppler flow rate signal was removed by cross-correlation filtering.Finally,an ideal ultrasonic Doppler flow rate signal was extracted.Simulation and experimental verification show that the proposed Doppler flow signal processing method can effectively enhance the signal-to-noise ratio(SNR)and extend the lower limit of measurement of the ultrasonic Doppler flow meter.
文摘The improved cross-correlation algorithm for the strain demodulation of Vernier-effect-based optical fiber sensor(VE-OFS)is proposed in this article.The algorithm identifies the most similar spectrum to the measured one from the database of the collected spectra by employing the cross-correlation operation,subsequently deriving the predicted value via weighted calculation.As the algorithm uses the complete information in the measured raw spectrum,more accurate results and larger measurement range can be obtained.Additionally,the improved cross-correlation algorithm also has the potential to improve the measurement speed compared to current standards due to the possibility for the collection using low sampling rate.This work presents an important algorithm towards a simpler,faster way to improve the demodulation performance of VE-OFS.
文摘Traditional cross-correlation algorithms are prone to time-of-flight(TOF)calculation errors under conditions of strong noise interference and complex temperature gradients,resulting in a decline in the accuracy of ultrasonic temperature measurement.To this end,this paper proposes an ultrasonic temperature measurement method that combines YOLOv11 target detection with energy-type weighted cross-correlation algorithm.The YOLOv11 model is utilized to conduct target detection and key area positioning on the ultrasonic signal waveform diagram,automatically identifying characteristic waveforms such as node waves and end face waves,and achieving adaptive extraction of the effective signal interval.Further introduce the energy-based weighted cross-correlation algorithm.Based on the signal energy distribution,the cross-correlation results are weighted and processed to enhance the main wave response and suppress noise interference.Experiments show that the YOLOv11 model has high detection accuracy(Precision=0.987,Recall=0.958,mAP@50=0.988);The proposed method maintains the stability of time delay estimation under strong noise and high temperature(>1200℃),with the average time delay error reduced by approximately 35%to 50%compared to traditional algorithms.This verifies its high robustness and temperature measurement accuracy in complex environments,and it has a promising engineering application prospect.
文摘The temperature change and rate of CO2 change are correlated with a time lag, as reported in a previous paper. The correlation was investigated by calculating a correlation coefficient r of these changes for selected ENSO events in this study. Annual periodical increases and decreases in the CO2 concentration were considered, with a regular pattern of minimum values in August and maximum values in May each year. An increased deviation in CO2 and temperature was found in response to the occurrence of El Niño, but the increase in CO2 lagged behind the change in temperature by 5 months. This pattern was not observed for La Niña events. An increase in global CO2 emissions and a subsequent increase in global temperature proposed by IPCC were not observed, but an increase in global temperature, an increase in soil respiration, and a subsequent increase in global CO2 emissions were noticed. This natural process can be clearly detected during periods of increasing temperature specifically during El Niño events. The results cast strong doubts that anthropogenic CO2 is the cause of global warming.
文摘Free surface elevation time series of breaking water waves were measured in a laboratory flume. This was done in order to analyze changes in wave characteristics as the waves propagated from deep water to the shore. A pair of parallel- wire capacitive wave gages was used to simultaneously measure free surface elevations at different positions along the flume. One gage was kept fixed near the wave generator to provide a reference while the other was moved in steps of 0.1 m in the vicinity of the break point. Data from these two wave gages measured at the same time constitute station-to-station free surface elevation time series. Fast Fourier Transform (FFT) based cross-correlation techniques were employed to determine the time lag between each pair of the time series. The time lag was used to compute the phase shift between the reference wave gage and that at various points along the flume. Phase differences between two points spaced 0.1 m apart were used to calculate local mean wave phase velocity for a point that lies in the middle. Results show that moving from deep water to shallow water, the measured mean phase velocity decreases almost linearly from about 1.75 m/s to about 1.50 m/s at the break point. Just after the break point, wave phase velocity abruptly increases to a maximum value of 1.87 m/s observed at a position 30 cm downstream of the break point. Thereafter, the phase velocity decreases, reaching a minimum of about 1.30 m/s.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11875042 and 11505114)the Shanghai Project for Construction of Top Disciplines (Grant No. USST-SYS-01)。
文摘Detecting coupling pattern between elements in a complex system is a basic task in data-driven analysis. The trajectory for each specific element is a cooperative result of its intrinsic dynamic, its couplings with other elements, and the environment. It is subsequently composed of many components, only some of which take part in the couplings. In this paper we present a framework to detect the component correlation pattern. Firstly, the interested trajectories are decomposed into components by using decomposing methods such as the Fourier expansion and the Wavelet transformation. Secondly, the cross-correlations between the components are calculated, resulting into a component cross-correlation matrix(network).Finally, the dominant structure in the network is identified to characterize the coupling pattern in the system. Several deterministic dynamical models turn out to be characterized with rich structures such as the clustering of the components. The pattern of correlation between respiratory(RESP) and ECG signals is composed of five sub-clusters that are mainly formed by the components in ECG signal. Interestingly, only 7 components from RESP(scattered in four sub-clusters) take part in the realization of coupling between the two signals.
文摘This study investigates prescribed-time position tracking control for electromagnetic satellite formations subject to model uncertainties and external disturbances.Using the Clohessy-Wiltshire equations as the relative motion dynamics model,a prescribed time output feedback control strategy is proposed.A prescribed-time extended state observer is designed to estimate the relative velocity and external disturbances.The disturbance estimates are then used as the feedforward component of the controller.Building on this framework,a novel prescribed-time active disturbance rejection control strategy for position tracking is developed via a backstepping control design.The convergence of the extended state observer and the stability of the closed-loop system are rigorously analyzed using Lyapunov stability theory.Numerical simulations are performed to validate the effectiveness of the proposed controller.
基金the National Natural Science Foundation of China(Grant Nos.11805128,11875042,11505114,and 10975099)the Program for Professor of Special Appointment(Orientational Scholar)at Shanghai Institutions of Higher Learning,China(Grant Nos.D-USST02 and QD2015016)the Shanghai Project for Construction of Top Disciplines,China(Grant No.USST-SYS-01).
文摘A complex system contains generally many elements that are networked by their couplings.The time series of output records of the system's dynamical process is subsequently a cooperative result of the couplings.Discovering the coupling structure stored in the time series is an essential task in time series analysis.However,in the currently used methods for time series analysis the structural information is merged completely by the procedure of statistical average.We propose a concept called mode network to preserve the structural information.Firstly,a time series is decomposed into intrinsic mode functions and residue by means of the empirical mode decomposition solution.The mode functions are employed to represent the contributions from different elements of the system.Each mode function is regarded as a mono-variate time series.All the mode functions form a multivariate time series.Secondly,the co-occurrences between all the mode functions are then used to construct a threshold network(mode network)to display the coupling structure.This method is illustrated by investigating gait time series.It is found that a walk trial can be separated into three stages.In the beginning stage,the residue component dominates the series,which is replaced by the mode function numbered M14 with peaks covering^680 strides(~12 min)in the second stage.In the final stage more and more mode functions join into the backbone.The changes of coupling structure are mainly induced by the co-occurrent strengths of the mode functions numbered as M11,M12,M13,and M14,with peaks covering 200-700 strides.Hence,the mode network can display the rich and dynamical patterns of the coupling structure.This approach can be extended to investigate other complex systems such as the oil price and the stock market price series.
基金supported by the Tianjin Manufacturing High Quality Development Special Foundation(No.20232185)the Roycom Foundation(No.70306901).
文摘Hard disk drives(HDDs)serve as the primary storage devices in modern data centers.Once a failure occurs,it often leads to severe data loss,significantly degrading the reliability of storage systems.Numerous studies have proposed machine learning-based HDD failure prediction models.However,the Self-Monitoring,Analysis,and Reporting Technology(SMART)attributes differ across HDD manufacturers.We define hard drives of the same brand and model as homogeneous HDD groups,and those from different brands or models as heterogeneous HDD groups.In practical engineering scenarios,a data center is often composed of a heterogeneous population of HDDs,spanning multiple vendors and models.Existing research predominantly focuses on homogeneous datasets,ignoring the model’s generalization capability across heterogeneous HDDs.As a result,HDD models with limited samples often suffer from poor training effectiveness and prediction performance.To address this issue,we investigate generalizable SMART predictors across heterogeneous HDD groups.By extracting time-series features within a fixed sliding time window,we propose a Heterogeneous Disk Failure Prediction Method based on Time Series Features(HDFPM)framework.This method is adaptable to HDD models with limited sample sizes,thereby enhancing its applicability and robustness across diverse drive populations.Experimental results show that the proposed model achieves an F1-score of 0.9518 when applied to two different Seagate HDD models,while maintaining the False Positive Rate(FPR)below 1%.After incorporating the Complexity-Ratio Dynamic Time Warping(CDTW)based feature enhancement method,the best prediction model achieves a True Positive Rate(TPR)of up to 0.93 between the two models.For next-day failure prediction across various Seagate models,the model achieves an F1-score of up to 0.8792.Moreover,the experimental results also show that within the same brand,the higher the proportion of shared SMART attributes across different models,the better the prediction performance.In addition,HDFPMdemonstrates the best stability andmost significant performance in heterogeneous environments.
文摘Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensive OCCUS project. A potential high-resolution method for the aforementioned purpose lies in the full-waveform inversion(FWI) of time-lapse seismic data. However, practical applications of FWI are severely restricted by the well-known cycle-skipping problem. A new time-lapse FWI method using cross-correlation-based dynamic time warping(CDTW) is proposed to detect changes in the subsurface property due to carbon dioxide(CO_(2)) injection and address the aforementioned issue. The proposed method, namely CDTW, which combines the advantages of cross-correlation and dynamic time warping, is employed in the automatic estimation of the discrepancy between the seismic signals simulated using the baseline/initial model and those acquired. The proposed FWI method can then back-project the estimated discrepancy to the subsurface space domain, thereby facilitating retrieval of the induced subsurface property change by taking the difference between the inverted baseline and monitor models. Numerical results on pairs of signals prove that CDTW can obtain reliable shifts under amplitude modulation and noise contamination conditions. The performance of CDTW substantially outperforms that of the conventional dynamic time warping method. The proposed time-lapse fullwaveform inversion(FWI) method is applied to the Frio-2 CO_(2) storage model. The baseline and monitor models are inverted from the corresponding time-lapse seismic data. The changes in velocity due to CO_(2) injection are reconstructed by the difference between the baseline and the monitor models.
基金National Natural Science Foundation of China under Grant Nos.51979205 and 51939008。
文摘This research is focused on the calculation of a reasonable detonator delay time for realizing cut blast vibration control.First,the viscoelastic rock mass parameters corresponding to the engineering rock mass quality classification were determined based on wave theory of Kelvin medium.Then,a calculation model was obtained for the millisecond-delay cut blast vibration in Kelvin media using the Starfield charge superposition principle.Further,the influence of the delay time on the cut blast vibration was quantitatively analyzed and a method for calculating the reasonable cut blasting millisecond delay time is proposed according to the principle of dimensional analysis.Finally,field tests were used to verify the applicability of the method.The results show that 5 ms to 20 ms is a better detonator delay time range and cut blasting vibration can be effectively controlled using the delay time calculated by the calculation model described in this paper.
基金supported by the Fundamental Research Funds for the Central Universities of China(FRF-TP-24-058A)with additional support from the National Key Laboratory of Helicopter Aeromechanics(2024-ZSJ-LB-02-02).
文摘Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative control guidance law(ITCCG)that combines the optimal error dynamics with an improved adaptive cubature Kalman filter(IACKF)algorithm.First,a terminal impact time feedback term is introduced into proportional navigation guidance based on the relative virtual guidance model,and terminal time control is achieved through optimal error dynamics.Then,the Huber loss function is used to reduce the impact of measurement outliers,and the diagonal decomposition is applied to address the issue of non-positive definite matrices that cannot undergo Cholesky decomposition.Finally,the ITCCG and IACKF algorithms combined achieve multi-UAV time-cooperated guidance based on maneuvering target state estimation.Simulation results show that the proposed algorithm effectively reduces the target state estimation error and achieves cooperative guidance within the desired time frame.
基金Jiangsu Provincial Hospital Association Hospital Management Innovation Research Fund(Project Ni.:JSYGY-3-2025-267)。
文摘Severe trauma often involves complex injuries,leading to high disability and fatality rates.Effective treatment requires prompt and coordinated efforts across multiple disciplines to enhance success rates.Time-based chain rescue is crucial in managing severe trauma.A patient with chest and abdominal injuries and hemorrhagic shock was transferred from an ambulance to our hospital.Our trauma team-initiated pre-hospital first aid,utilized an emergency green channel,and conducted rapid ultrasound,collaborating across disciplines.The patient eventually recovered and was discharged.
基金supported in part by the Opening Project of Guangxi Wireless Broadband Communication and Signal Processing Key Laboratory under Grant AD25069102in part by the Basic Ability Improvement Project of Young and Middle Aged Teachers in Guangxi Universities,under Grant 2023KY0226+6 种基金in part by Key Laboratory of Cognitive Radio and Information Processing,Ministry of Education of China,underGrant CRKL220108in part by the Innovation Project of Guangxi Graduate Education,under Grant YCBZ2023131in part by the Doctoral Research Foundation of Guilin University of Electronic Technology,under Grant UF23038Yin part by the Bagui Youth Top Talent Projectin part by the Guangxi Key Research and Development Program under Grant AB25069510in part by Open Fund of IPOC(BUPT),No.IPOC2024B07in part by Guangxi Key Laboratory of Precision Navigation Technology and Application,under Grant DH202309.
文摘UAV-mounted intelligent reflecting surface(IRS)helps address the line-of-sight(LoS)blockage between sensor nodes(SNs)and the fusion center(FC)in Internet of Things(IoT).This paper considers an IoT assisted by multiple UAVs-mounted IRS(U-IRS),where the data from ground SNs are transmitted to the FC.In practice,energy efficiency(EE)and mission completion time are crucial metrics for evaluating system performance and operational costs.Recognizing their importance during data collection,we formulate a multi-objective optimization problem to maximize EE and minimize total mission completion time simultaneously.To characterize this tradeoff while considering optimization objective consistency,we construct an optimization problem that minimizes the weighted sum of the total mission completion time and the reciprocal of EE.Due to the non-convex nature of the formulated problem,obtaining optimal solutions is generally challenging.To tackle this issue,we decompose it into three subproblems:UAV-SN association,number of reflecting elements allocation,andUAVtrajectory optimization.An iterative algorithmcombining genetic algorithm,CS-BJ algorithm,and successive convex approximation technique is proposed to solve these sub-problems.Simulation results demonstrate that when the transmitted data amount is 10 and 30Mbits,compared to the static collection benchmark(the UAV hovers directly above each SN),the EE of the proposed method improves by more than 10.4% and 5.2%,while the total mission completion time is reduced by more than 5.4% and 3.3%,respectively.
