In the three-wire welding system, a welding process consists of the operations of four devices, namely three welding machines and one bogie. The operations need to be synchronized by a numerical coordinate controller ...In the three-wire welding system, a welding process consists of the operations of four devices, namely three welding machines and one bogie. The operations need to be synchronized by a numerical coordinate controller （ NCC ）. In this paper, we will discuss a tnsk-job-procedure cubic program structure. Under this structure, the devices are synchronized and isolated at the same time. This cubic program structure can also be used as a reference for other multi-device or multi-unit manufacturing processes.展开更多
When a coin is tossed to a gravity well,it will spiral instead of falling directly to the center.Inspired by this phenomenon,a gravity well-inspired double friction pendulum system(GW-DFPS)is developed to extend the l...When a coin is tossed to a gravity well,it will spiral instead of falling directly to the center.Inspired by this phenomenon,a gravity well-inspired double friction pendulum system(GW-DFPS)is developed to extend the length of sliding trajectories of bridge superstructures during pulse-like near-fault earthquakes.As a result,a greater amount of energy will be dissipated due to the frictional sliding of the isolators.The GW-DFPS consists of a spherical surface and an outer surface described by a 1/x or logarithmic function to build gravity well.Full-scale isolators were fabricated and their response was characterized considering various parameters such as the friction material of slider,surface roughness of sliding surfaces,and applied vertical loads.Additionally,a finite element model of the isolator was created using the experimental test data.Numerical simulations were performed on a case-study bridge structure isolated using both a conventional DFPS system and the proposed GW-DFPS systems.The experimental results reveal that the proposed isolators exhibit stable response under vertical loads varying from 200 kN to 1000 kN with a negative stiffness response when the isolator slides at the outer sliding surface.The numerical simulations of the selected bridge structure demonstrate that the GW-DFPS significantly extends the sliding trajectory lengths of the superstructure during half of the earthquake pulses,resulting in increased energy dissipation during this interval.The kinetic energies of the bridge isolated by GW-DFPS are consistently lower than those of the bridge isolated by the other two kinds of isolators,resulting lower shear forces on the bridge.展开更多
Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propul...Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propulsion(In-FEEP)micro-thruster using three methods based on a pendulum:direct thrust measurement,indirect plume momentum transfer and beam current diagnostics.The experimental setup utilized capacitive displacement sensors for force detection and a voice coil motor as a feedback actuator,achieving a resolution better than 0.1μN.Key performance factors such as ionization and plume divergence of ejected charged particles were also examined.The study reveals that the high applied voltage induces significant electrostatic interference,becoming the dominant source of error in direct thrust measurements.Beam current diagnostics and indirect plume momentum measurements were conducted simultaneously,showing strong agreement within a deviation of less than 0.2N across the operational thrust range.The results from all three methods are consistent within the error margins,verifying the reliability of the indirect measurement approach and the theoretical thrust model based on the electrical parameters of In-FEEP.展开更多
Global warming has made the regular operation of Arctic routes possible.This study selects hub ports based on infrastructure conditions and sea ice status,and then designs two pendulum route solutions for the Northeas...Global warming has made the regular operation of Arctic routes possible.This study selects hub ports based on infrastructure conditions and sea ice status,and then designs two pendulum route solutions for the Northeast Passage according to the distance between hub ports and ice-covered areas.We employ an evaluation framework combining annual profit metrics with discounted net present value(NPV)analysis,conducting probabilistic economic assessments through Monte Carlo simulations(20,000 iterations).Key findings indicate that(1)both solutions demonstrate>90%probability of economic viability and(2)Solution I′,with hub ports closer to ice-covered areas than those in Solution II,yields 5.02%higher mean annual profit and 4.69%greater NPV.The results indicate that pendulum routes in the Northeast Passage can achieve economic benefits by enabling year-round regular operations.Moreover,shorter shipping distances between hub ports and ice-covered areas enhance economic viability.展开更多
In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the p...In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.展开更多
The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize ...The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize their isolation performance.Current researches on the shear pins are mainly based on linear elastic models,neglecting their plasticity,damage,and fracture mechanical properties.To accurately predict its cutoff behavior,the elastic-plastic degradationmodel of 40Cr steel is indeed calibrated.For this purpose,the Ramberg-Osgoodmodel,the Bao-Wierzbicki damage initiation criterion,and the linear damage evolution criterion were selected to develop the elastic-plastic degradation model of 40Cr.Subsequently,parameter calibration of this model was performed through uniaxial tensile tests on two sets of six smooth,round bars with different diameters.Following this,finite element simulations were conducted for the pure shear test of grade 10.9 high-strength bolts made of 40Cr steel,aiming to verify the elasticplastic degradation model.The results showed that the failure modes and force-displacement curves simulated by the finite element method were in good agreement with the test results.Moreover,the error between the primary characteristic parameters(initial stiffness,peak load,fracture displacement,and absorbed energy)obtained by finite element calculation and the test values was within 15%.These results demonstrated that the calibration elastic-plastic degradation model of 40Cr steel can predict the cutoff of the shear pin.展开更多
A novel friction pendulum system （FPS） with dual rollers is studied based on the multibody dynamics theory. By analyzing kinematic characteristics of the system, it is reduced to a one degree-of-freedom system. Then...A novel friction pendulum system （FPS） with dual rollers is studied based on the multibody dynamics theory. By analyzing kinematic characteristics of the system, it is reduced to a one degree-of-freedom system. Then the equation of motion for the system is analytically derived by applying the theorem of the relative kinetic energy for a system of particles in differential form in the non-inertial reference system described as a nonlinear differential equation. In the case of the small angular displacement, the natural frequency of the corresponding undamped linear system is obtained, which is consistent with the experimental observation. The derived equation is useful for the study of dynamic characteristics of novel FPS, and its solution directly expedites the simulation of the system in a control loop, and further facilitates the semi-active control process including novel FPS.展开更多
Linear quadratic regulator(LQR) and proportional-integral-derivative(PID) control methods, which are generally used for control of linear dynamical systems, are used in this paper to control the nonlinear dynamical sy...Linear quadratic regulator(LQR) and proportional-integral-derivative(PID) control methods, which are generally used for control of linear dynamical systems, are used in this paper to control the nonlinear dynamical system. LQR is one of the optimal control techniques, which takes into account the states of the dynamical system and control input to make the optimal control decisions.The nonlinear system states are fed to LQR which is designed using a linear state-space model. This is simple as well as robust. The inverted pendulum, a highly nonlinear unstable system, is used as a benchmark for implementing the control methods. Here the control objective is to control the system such that the cart reaches a desired position and the inverted pendulum stabilizes in the upright position. In this paper, the modeling and simulation for optimal control design of nonlinear inverted pendulum-cart dynamic system using PID controller and LQR have been presented for both cases of without and with disturbance input. The Matlab-Simulink models have been developed for simulation and performance analysis of the control schemes. The simulation results justify the comparative advantage of LQR control method.展开更多
This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave mo...This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.展开更多
基金This work was supported by the Natural Science Fund of China,grant number 50375054.
文摘In the three-wire welding system, a welding process consists of the operations of four devices, namely three welding machines and one bogie. The operations need to be synchronized by a numerical coordinate controller （ NCC ）. In this paper, we will discuss a tnsk-job-procedure cubic program structure. Under this structure, the devices are synchronized and isolated at the same time. This cubic program structure can also be used as a reference for other multi-device or multi-unit manufacturing processes.
基金financially supported by the National Natural Science Foundation of China(Grants 52178124,52478151).
文摘When a coin is tossed to a gravity well,it will spiral instead of falling directly to the center.Inspired by this phenomenon,a gravity well-inspired double friction pendulum system(GW-DFPS)is developed to extend the length of sliding trajectories of bridge superstructures during pulse-like near-fault earthquakes.As a result,a greater amount of energy will be dissipated due to the frictional sliding of the isolators.The GW-DFPS consists of a spherical surface and an outer surface described by a 1/x or logarithmic function to build gravity well.Full-scale isolators were fabricated and their response was characterized considering various parameters such as the friction material of slider,surface roughness of sliding surfaces,and applied vertical loads.Additionally,a finite element model of the isolator was created using the experimental test data.Numerical simulations were performed on a case-study bridge structure isolated using both a conventional DFPS system and the proposed GW-DFPS systems.The experimental results reveal that the proposed isolators exhibit stable response under vertical loads varying from 200 kN to 1000 kN with a negative stiffness response when the isolator slides at the outer sliding surface.The numerical simulations of the selected bridge structure demonstrate that the GW-DFPS significantly extends the sliding trajectory lengths of the superstructure during half of the earthquake pulses,resulting in increased energy dissipation during this interval.The kinetic energies of the bridge isolated by GW-DFPS are consistently lower than those of the bridge isolated by the other two kinds of isolators,resulting lower shear forces on the bridge.
基金Project supported by the National Key Research and Development Program of China(Grant No.2020YFC2201001)the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2019B030302001)+1 种基金the National Natural Science Foundation of China(Grant Nos.12105373,12105374,and 11927812)the Science and Technology Research Project of Jiangxi Provincial Department of Education(Grant No.GJJ2402105).
文摘Accurate thrust assessment is crucial for characterizing the performance of micro-thrusters.This paper presents a comprehensive evaluation of the thrust generated by a needle-type indium field emission electric propulsion(In-FEEP)micro-thruster using three methods based on a pendulum:direct thrust measurement,indirect plume momentum transfer and beam current diagnostics.The experimental setup utilized capacitive displacement sensors for force detection and a voice coil motor as a feedback actuator,achieving a resolution better than 0.1μN.Key performance factors such as ionization and plume divergence of ejected charged particles were also examined.The study reveals that the high applied voltage induces significant electrostatic interference,becoming the dominant source of error in direct thrust measurements.Beam current diagnostics and indirect plume momentum measurements were conducted simultaneously,showing strong agreement within a deviation of less than 0.2N across the operational thrust range.The results from all three methods are consistent within the error margins,verifying the reliability of the indirect measurement approach and the theoretical thrust model based on the electrical parameters of In-FEEP.
文摘Global warming has made the regular operation of Arctic routes possible.This study selects hub ports based on infrastructure conditions and sea ice status,and then designs two pendulum route solutions for the Northeast Passage according to the distance between hub ports and ice-covered areas.We employ an evaluation framework combining annual profit metrics with discounted net present value(NPV)analysis,conducting probabilistic economic assessments through Monte Carlo simulations(20,000 iterations).Key findings indicate that(1)both solutions demonstrate>90%probability of economic viability and(2)Solution I′,with hub ports closer to ice-covered areas than those in Solution II,yields 5.02%higher mean annual profit and 4.69%greater NPV.The results indicate that pendulum routes in the Northeast Passage can achieve economic benefits by enabling year-round regular operations.Moreover,shorter shipping distances between hub ports and ice-covered areas enhance economic viability.
文摘In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.
基金The Research Start-up Fund for Talents Introduction of Huaiyin Institute of Technology(Grant No.Z301B23517).
文摘The shear pin of the friction pendulum bearing(FPB)can be made of 40Cr steel.In conceptual design,the optimal cut-off point of the shear pin is predetermined,guiding the design of bridges isolated by FPBs to maximize their isolation performance.Current researches on the shear pins are mainly based on linear elastic models,neglecting their plasticity,damage,and fracture mechanical properties.To accurately predict its cutoff behavior,the elastic-plastic degradationmodel of 40Cr steel is indeed calibrated.For this purpose,the Ramberg-Osgoodmodel,the Bao-Wierzbicki damage initiation criterion,and the linear damage evolution criterion were selected to develop the elastic-plastic degradation model of 40Cr.Subsequently,parameter calibration of this model was performed through uniaxial tensile tests on two sets of six smooth,round bars with different diameters.Following this,finite element simulations were conducted for the pure shear test of grade 10.9 high-strength bolts made of 40Cr steel,aiming to verify the elasticplastic degradation model.The results showed that the failure modes and force-displacement curves simulated by the finite element method were in good agreement with the test results.Moreover,the error between the primary characteristic parameters(initial stiffness,peak load,fracture displacement,and absorbed energy)obtained by finite element calculation and the test values was within 15%.These results demonstrated that the calibration elastic-plastic degradation model of 40Cr steel can predict the cutoff of the shear pin.
文摘A novel friction pendulum system （FPS） with dual rollers is studied based on the multibody dynamics theory. By analyzing kinematic characteristics of the system, it is reduced to a one degree-of-freedom system. Then the equation of motion for the system is analytically derived by applying the theorem of the relative kinetic energy for a system of particles in differential form in the non-inertial reference system described as a nonlinear differential equation. In the case of the small angular displacement, the natural frequency of the corresponding undamped linear system is obtained, which is consistent with the experimental observation. The derived equation is useful for the study of dynamic characteristics of novel FPS, and its solution directly expedites the simulation of the system in a control loop, and further facilitates the semi-active control process including novel FPS.
文摘Linear quadratic regulator(LQR) and proportional-integral-derivative(PID) control methods, which are generally used for control of linear dynamical systems, are used in this paper to control the nonlinear dynamical system. LQR is one of the optimal control techniques, which takes into account the states of the dynamical system and control input to make the optimal control decisions.The nonlinear system states are fed to LQR which is designed using a linear state-space model. This is simple as well as robust. The inverted pendulum, a highly nonlinear unstable system, is used as a benchmark for implementing the control methods. Here the control objective is to control the system such that the cart reaches a desired position and the inverted pendulum stabilizes in the upright position. In this paper, the modeling and simulation for optimal control design of nonlinear inverted pendulum-cart dynamic system using PID controller and LQR have been presented for both cases of without and with disturbance input. The Matlab-Simulink models have been developed for simulation and performance analysis of the control schemes. The simulation results justify the comparative advantage of LQR control method.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51205346 and 41206074)the National High Technology Research and Development Program of China(863 Program+3 种基金Grant No.2011AA050201)Science Fund for Creative Research Groups of National Natural Science Foundation of China(Grant No.51221004)Zhejiang Provincial Natural Science Foundation of China(Grant No.LY12E05017)Open Foundation of the State Key Laboratory of Fluid Power Transmission and Control(Grant No.GZKF-201311)
文摘This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.
