Three-dimensional（3D）ordered mesoporous MnO2 was prepared using KIT-6 mesoporous molecular sieves as a hard template.The material was used for catalytic oxidation of HCHO.The material has high surface areas and the ...Three-dimensional（3D）ordered mesoporous MnO2 was prepared using KIT-6 mesoporous molecular sieves as a hard template.The material was used for catalytic oxidation of HCHO.The material has high surface areas and the mesoporous characteristics of the template,with cubic symmetry（ia3d）.It consists of a β-MnO2 crystalline phase corresponding to pyrolusite,with a rutile structure.Transmission electron microscopy and X-ray photoelectron spectroscopy showed that the 3D-MnO2 catalyst has a large number of exposed Mn4＋ ions on the（110）crystal plane surfaces,with a lattice spacing of 0.311 nm; this enhances oxidation of HCHO.Complete conversion of HCHO to CO2 and H2O was achieved at 130 °C on 3D-MnO2; the same conversions on α-MnO2 and β-MnO2 nanorods were obtained at 140 and 180 °C,respectively,under the same conditions.The specific mesoporous structure,high specific surface area,and large number of surface Mn4＋ ions are responsible for the catalytic activity of 3D-MnO2 in HCHO oxidation.展开更多
Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission elec...Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray scattering elemental mapping, X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and temperature-programmed reduction of H2. Further, their catalytic activity in soot combustion was determined by temperature-programmed oxidation reaction. K substitution into the LaNiO3 lattice led to remarkably improved catalytic activity of this catalyst in soot combustion. Amongst various catalysts, La0.95K0.05NiO3 exhibited the highest activity in soot combustion (with its T50 and CO2 S values being 338 °C and 98.2%, respectively), which is comparable to the catalytic activities of Pt-based catalysts under the condition of poor contact between the soot and the catalyst. K-substitution improves the valence state of Ni and increases the number of oxygen vacancies, thereby leading to increased density of surface-active oxygen species. The active oxygen species play a vital role in catalyzing the elimination of soot. The perovskite-type La1?xKxNiO3 nanocatalysts with 3DOM structure without noble metals have potential for practical applications in the catalytic combustion of diesel soot particles.展开更多
Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing mala...Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing malachite green(MG)in aqueous solution.The microstructures of the adsorbents were characterized by FESEM,TEM and BET,and the effects of initial dye concentration,contact time,solution pH,and temperature on adsorption performance were investigated.The results show that the 3DOM/m-C exhibits extremely high adsorption capacity of 3541.1 mg/g within 2 h,which could be attributed to the novel ordered hierarchical structure with mesopores on three-dimensional ordered macroporous carbon walls.And the adsorption behavior conforms to the pseudo-second-order kinetic and Langmuir adsorption isotherm.3DOM/m-C can be recycled after being desorbed by absolute ethanol,and still maintains a high capacity of 2762.06 mg/g after 5 cycles.展开更多
The three-dimensional ordered macroporous CeO2：Yb,Er materials were prepared, and the influence of doping concentra- tion of Yb3＋ or Er3＋ ions on upconversion property was investigated. Green and red upconversion e...The three-dimensional ordered macroporous CeO2：Yb,Er materials were prepared, and the influence of doping concentra- tion of Yb3＋ or Er3＋ ions on upconversion property was investigated. Green and red upconversion emissions were observed under the excitation of 980 nm at room temperature. It was found that the ratio of red to green upconversion emission intensity increased with increasing of concentration of the Yb3＋ or Er3＋ ions in the three-dimensional ordered macroporous CeO2：Yb,Er materials. When the concentration of Yb3＋ was 10 mol%, pure red upconversion emission was obtained. The varied mechanism of ratio of red to green upconversion emission intensity was discussed with the concentration of Yb3＋ or Er3＋ ions.展开更多
A series of three-dimensional ordered macroporous(3 DOM)W-TiO_(2)catalysts have been prepared through a facile colloidal crystal template method.The prepared materials characterized in detail exhibited enhanced cataly...A series of three-dimensional ordered macroporous(3 DOM)W-TiO_(2)catalysts have been prepared through a facile colloidal crystal template method.The prepared materials characterized in detail exhibited enhanced catalytic activity in aerobic oxidative desulfurization process.The experimental results indicated that the as-prepared materials possessed excellent 3 DOM structure,which is beneficial for the catalytic activity.The sample 3 DOM W-TiO_(2)-20 exhibited the highest activity in ODS process,and the sulfur removal can reach 98%in 6 h.Furthermore,the oxidative product was also analyzed in the reaction process.展开更多
Electrocatalytic reduction of carbon dioxide(CO_(2)RR) into high value-added chemicals and fuels has been regarded as a promising approach to achieve carbon neutrality.Though nickel-nitrogen-carbon(Ni-N-C) electrocata...Electrocatalytic reduction of carbon dioxide(CO_(2)RR) into high value-added chemicals and fuels has been regarded as a promising approach to achieve carbon neutrality.Though nickel-nitrogen-carbon(Ni-N-C) electrocatalysts have shown superior CO_(2)RR performance,the synthesis of highly effective Ni-N-C catalyst is still challenging.Herein,a three-dimensional(3D) ordered porous nitrogendoped carbon-supported Ni-N_(x) catalyst has been synthesized by direct pyrolysis of a mixture of SiO_(2),polyvinyl pyrrolidone,nickel-phenanthroline complex,followed by the removal of the SiO_(2) templates.展开更多
Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the c...Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical performance.In this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle effect.OM-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain catenation.The OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.展开更多
Developing host materials with high specific surface area, good electron conductivity, and fast ion transportation channel is critical for high performance lithium-selenium(Li-Se) batteries. Herein, a series of three ...Developing host materials with high specific surface area, good electron conductivity, and fast ion transportation channel is critical for high performance lithium-selenium(Li-Se) batteries. Herein, a series of three dimensional ordered hierarchically porous carbon(3D OHPC) materials with micro/meso/macropores are designed and synthesized for Li-Se battery. The porous structure is tuned by following the concept of the generalized Murray’s law to facilitate the mass diffusion and reduce ion transport resistance.The optimized 3D Se/OHPC cathode exhibits a very high 2 nd discharge capacity of 651 m Ah/g and retains 361 m Ah/g after 200 cycles at 0.2 C. Even at a high current rate of 5 C, the battery still shows a discharge capacity as high as 155 m Ah/g. The improved electrochemical performance is attributed to the synergy effect of the interconnected and well-designed micro, meso and macroporosity while shortened ions diffusion pathways of such Murray materials accelerate its ionic and electronic conductivities leading to the enhanced electrochemical reaction. The diffusivity coefficient in Se/OHPC can reach a very high value of 1.3 × 10^(-11)cm^(2)/s, much higher than those in single pore size carbon hosts. Their effective volume expansion accommodation capability and reduced dissolution of polyselenides ensure the high stability of the battery. This work, for the first time, established the clear relationship between textural properties of cathode materials and their performance and demonstrates that the concept of the generalized Murray’s law can be used as efficient guidance for the rational design and synthesis of advanced hierarchically porous materials and the great potential of 3D OHPC materials as a practical high performance cathode material for Li-Se batteries.展开更多
To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an...To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an ordered interconnected three-dimensional montmorillonite(MMT)aerogel network.The average pore diameter of the aerogels was successfully reduced from 11.53μm to 2.51μm by adjusting the ratio of poly(vinyl alcohol)(PVA)to MMT via directional freezing.Changes in the aerogel network were observed in field emission scanning electron microscope(FESEM)images.After vacuum impregnation,the aerogel network structure of the composites was observed using FESEM.Tensile tests indicated that as the pore diameter decreased,the elongation at break of the composites first increased to a peak of329.61%before decreasing,while the tensile strength and Young's modulus continuously increased to their maximum values of 6.29 MPa and24.67 MPa,respectively.Meanwhile,FESEM images of the tensile cracks and fracture surfaces showed that with a reduction in aerogel pore diameter,the degrees of crack deflection and interfacial debonding increased,presenting a rougher fracture surface.These phenomena enable the composites to dissipate substantial energy during tension,thus effectively improving the mechanical strength of the composites.The present work elucidates the bearing of ordered three-dimensional aerogel network structures on the performance of rubber matrices and provides crucial theoretical insights and technical guidance for the creation and optimization of high-performance PDMS-based composites.展开更多
A series of K-doped Mn0.5Ce0.5Oδ （K-MCO） catalysts with three-dimensionally ordered macroporous （3DOM） structure and different K loadings were successfully synthesized using simple methods. These catalysts exhibi...A series of K-doped Mn0.5Ce0.5Oδ （K-MCO） catalysts with three-dimensionally ordered macroporous （3DOM） structure and different K loadings were successfully synthesized using simple methods. These catalysts exhibited well-defined 3DOM nanostructure, which consisted of extensive interconnecting networks of spherical voids. The effects of the calcination temperature and calcination time on the morphological characteristics and crystalline forms of the catalysts were systematically studied. The catalysts showed high catalytic activity for the combustion of soot. 3DOM 20% K-MCO-4h catalyst, in particular, showed the highest catalytic activity of all of the catalysts studied （e.g., Ts0 = 331 ~C and Smco2 = 95.3%）. The occurrence of structural and synergistic effects among the K, Mn, and Ce atoms in the catalysts was favorable for enhancing their catalytic activity towards the combustion of diesel soot. Furthermore, the temperatures required for the complete combustion of the soot （〈400 ℃） were well within the exhaust temperature range （175-400 ℃）, which means that the accumulated soot can be removed under the conditions of the diesel exhaust gas. These catalysts could therefore be used in numerous practical applications because they are easy to synthesize, exhibit high catalytic activity, and can be made from low cost materials.展开更多
Developing the alternative supported noble metal catalysts with low cost,high catalytic efficiency,and good resistance toward carbon dioxide and water vapor is critically demanded for the oxidative removal of volatile...Developing the alternative supported noble metal catalysts with low cost,high catalytic efficiency,and good resistance toward carbon dioxide and water vapor is critically demanded for the oxidative removal of volatile organic compounds(VOCs).In this work,we prepared the mesoporous chromia-supported bimetallic Co and Ni single-atom(Co_(1)Ni_(1)/meso-Cr_(2)O_(3))and bimetallic Co and Ni nanoparticle(Co_(NP)Ni_(NP)/mesoCr_(2)O_(3))catalysts adopting the one-pot polyvinyl pyrrolidone(PVP)-and polyvinyl alcohol(PVA)-protecting approaches,respectively.The results indicate that the Co_(1)Ni_(1)/meso-Cr_(2)O_(3)catalyst exhibited the best catalytic activity for n-hexane(C_(6)H_(14))combustion(T_(50%)and T_(90%)were 239 and 263℃ at a space velocity of 40,000 mL g^(-1)h^(-1);apparent activation energy and specific reaction rate at 260℃ were 54.7 kJ mol^(-1)and 4.3×10^(-7)mol g^(-1)_(cat)s^(-1),respectively),which was associated with its higher(Cr^(5+)+Cr^(6+))amount,large n-hexane adsorption capacity,and good lattice oxygen mobility that could enhance the deep oxidation of n-hexane,in which Ni_(1) was beneficial for the enhancements in surface lattice oxygen mobility and low-temperature reducibility,while Co_(1) preferred to generate higher contents of the high-valence states of chromium and surface oxygen species as well as adsorption and activation of n-hexane.n-Hexane combustion takes place via the Mars van Krevelen(MvK)mechanism,and its reaction pathways are as follows:n-hexane→olefins or 3-hexyl hydroperoxide→3-hexanone,2-hexanone or 2,5-dimethyltetrahydrofuran→2-methyloxirane or 2-ethyl-oxetane→acrylic acid→CO_x→CO_(2)and H_(2)O.展开更多
The performance of catalysts used in after-treatment systems is the key factor for the removal of diesel soot,which is an important component of atmosphericfine particle emissions.Herein,three-dimensionally ordered ma...The performance of catalysts used in after-treatment systems is the key factor for the removal of diesel soot,which is an important component of atmosphericfine particle emissions.Herein,three-dimensionally ordered macroporous–mesoporous Ti_(x)Si+(1-x)O_(2)(3DOM-m Ti_(x)Si+(1-x)O_(2))and its supported MnO_(x)catalysts doped with different alkali/alkaline-earth metals(AMnO_(x)/3 DOM-m Ti_(0.7)Si_(0.3)O_(2)(A:Li,Na,K,Ru,Cs,Mg,Ca,Sr,Ba))were prepared by mesoporous template(P123)-assisted colloidal crystal template(CCT)and incipient wetness impregnation methods,respectively.Physicochemical characterizations of the catalysts were performed using scanning electron microscopy,X-ray diffraction,N_(2)adsorption–desorption,H_(2)temperature-programmed reduction,O_(2)temperature-programmed desorption,NO temperature-programmed oxidation,and Raman spectroscopy techniques;then,we evaluated their catalytic performances for the removal of diesel soot particles.The results show that the 3DOM-m Ti_(0.7)Si_(0.3)O_(2)supports exhibited a well-defined 3DOM-m nanostructure,and AMnO_(x)nanoparticles with 10–50 nm were evenly dispersed on the inner walls of the uniform macropores.In addition,the as-prepared catalysts exhibited good catalytic performance for soot combustion.Among the prepared catalysts,CsMnO_(x)/3DOM-m Ti_(0.7)Si_(0.3)O_(2)had the highest catalytic activity for soot combustion,with T10,T50,and T90(the temperatures corresponding to soot conversion rates of 10%,50%,and 90%)values of 285,355,and 393℃,respectively.The high catalytic activity of the CsMnO_(x)/3 DOM-m Ti_(0.7)Si_(0.3)O_(2)catalysts was attributed to their excellent low-temperature reducibility and homogeneous macroporous–mesoporous structure,as well as to the synergistic effects between Cs and Mn species and between CsMnO_(x)and the Ti_(0.7)Si_(0.3)O_(2)support.展开更多
Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fue...Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.展开更多
A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene（3DOM CLPS） by hydrophilic spacer arm has been investigated.Th...A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene（3DOM CLPS） by hydrophilic spacer arm has been investigated.The 3DOM CLPS with pore size 865 nm was prepared by sacrifice template method.The hydrophilic spacer arm（polyethylene glycol,molecular weight is 600） was grafted to the 3DOM CLPS via nucleophilic substitution reaction.The other side of active hydroxyl can be further converted into a lot of other functional groups.In this report,the chelating ligand 2-mercaptobenzothiazole（MBZ） group was introduced on the end of the PGE chain to evidence the versatile functionalization approach.The functionalized ordered macroporous materials were characterized by FT-IR,element analyzer,SEM.The results reveal that the pores were successfully bonded with 2-mercaptobenzothiazole groups via hydrophilic spacer arms and the original morphology of ordered macroporous materials were remained after functionalization.The MBZ group density is 0.052 mmol/m^2.The functionalized 3DOM CLPS are expected to application as heavy metal ions adsorbent.展开更多
A novel type of glucose sensor was fabricated based on a glucose oxidase(GOD)-N,N-dimethtylformamide(DMF)-[BMIm][BF4] composites modified three-dimensional ordered macroporous(3DOM) gold film electrode.The immobilized...A novel type of glucose sensor was fabricated based on a glucose oxidase(GOD)-N,N-dimethtylformamide(DMF)-[BMIm][BF4] composites modified three-dimensional ordered macroporous(3DOM) gold film electrode.The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions(PBS),which could be attributed to the redox of flavin adenine dinucleotide(FAD) in GOD.The research results show that ionic liquid([BMIm][BF4]),DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks.It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD.Simultaneously,the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode.The synergetic effect of DMF can help the GOD to maintain its bioactivity better.GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose,and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ.The apparent Km(Michaelis-Menten constant) for the enzymatic reaction is 0.018 mM.展开更多
Objective:To analyze the diagnostic value of transvaginal three-dimensional ultrasound(3D-TVS)in evaluating endometrial receptivity(ER)for ovulation disorder infertility(ODI),and to investigate the impact of subendome...Objective:To analyze the diagnostic value of transvaginal three-dimensional ultrasound(3D-TVS)in evaluating endometrial receptivity(ER)for ovulation disorder infertility(ODI),and to investigate the impact of subendometrial endometrial vascular index(VI)and endometrial vascular flow index(VFI)levels on ODI.Methods:A total of 110 patients diagnosed with ODI admitted between January 2023 and June 2024 were selected.All patients underwent ovulation induction therapy,3D-TVS examination,and sex hormone testing.Based on pregnancy outcomes,patients were divided into a successful pregnancy group(73 cases)and an unsuccessful pregnancy group(37 cases).ER parameters,sex hormone levels,and endometrial blood flow patterns were compared between the two groups.Receiver operating characteristic(ROC)curves were plotted to evaluate the predictive value of ER for ODI.Results:The spiral artery peak systolic velocity(PSV),endometrial volume(EMV),endometrial flow index(FI),and VFI in the successful pregnancy group were significantly higher than those in the unsuccessful pregnancy group(p<0.05).No significant differences were observed in other ER parameters between the two groups(p>0.05).There was no significant difference in sex hormone levels between the two groups on the day of human chorionic gonadotropin(hCG)treatment(p>0.05).Among the endometrial blood flow classifications in the pregnant group,the proportion of Type II was lower than that in the nonpregnant group(p<0.05).The Receiver Operating Characteristic(ROC)curve demonstrated that the area under the curve(AUC)for Endometrial Volume(EMV)in predicting pregnancy after Ovarian Dysfunction Infertility(ODI)treatment was 0.854,with a sensitivity of 92.61%and a specificity of 71.75%.The AUC for Vascularization Index(VI)was 0.771,with a sensitivity of 52.18%and a specificity of 88.70%.The AUC for Vascularization Flow Index(VFI)of the endometrium was 0.887,with a sensitivity of 80.01%and a specificity of 69.20%.Conclusion:Three-dimensional transvaginal sonography(3D-TVS)assessment of endometrial receptivity(ER)can effectively detect ODI,and the levels of subendometrial VI and VFI demonstrate superior predictive performance for pregnancy outcomes in this condition,serving as commonly used predictive indicators for the disease.展开更多
Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by sc...Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy（SEM）, X-ray diffractometer（XRD）, high-resolution transmission electron microscopy（HRTEM） and temperature programmed reducfion（TPR） techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift （WGS） reaction in a wide temperature range （180-360 ℃）. The results showed that 3DOM Pt/TiO2 catalyst exhibited obviously better catalytic performance than the corresponding non macro-porous catalyst, owing to the macro-porous structure favoring mass transfer. Addition of celia into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the celia modified catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.展开更多
Three-dimensionally ordered macro-porous （3DOM） Pt/TiO2 catalysts were prepared by template and impregnation methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. ...Three-dimensionally ordered macro-porous （3DOM） Pt/TiO2 catalysts were prepared by template and impregnation methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. The catalytic performance for water-gas shift （WGS） reaction was tested, and the influences of some conditions, such as reduction temperature of catalysts, the amount of Pt loadings and space velocity on catalytic performance were investigated. It was shown that Pt particles were homogeneously dispersed on 3DOM TiO2. The reduction of TiO2 surface was important for the catalytic performance. The activity test results showed that the 3DOM Pt/TiO2 catalysts exhibited very good catalytic performance for WGS reaction even at high space velocity, which was owing to the better mass transfer of 3DOM porous structure besides the high intrinsic activity of Pt/TiO2.展开更多
The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposite...The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions. The three-dimensionally ordered macroporous（3DOM） polyimide membranes without crack were fabricated by reproducing the structure of silica opal template. We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol. The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel. The proton conductivity increased with the increasing of pore cell in composite membranes.展开更多
A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These c...A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These catalysts were characterized using scanning electron microscopy,the Brunauer‐Emmett‐Teller method,X‐ray diffraction,transmission electron microscopy,ultraviolet‐visible spectroscopy,and temperature‐programmed reduction by H2.Au nanoparticles of mean particle size5nm were well dispersed and supported on the inner walls of uniform macropores.The3DOM structure improved the contact efficiency between soot and the catalyst.An Al‐Ce‐O solid solution was formed in the multilayer support,i.e.,x‐CeO2/Al2O3,by the incorporation of Al3+ions into the CeO2lattice,which resulted in the creation of extrinsic oxygen vacancies.Strong interactions between the metal(Au)and the support(Ce)increased the amount of active oxygen species,and this promoted soot oxidation.The catalytic performance in soot combustion was evaluated using a temperature‐programmed oxidation technique.The presence of CeO2nanolayers in the3DOM Au/x‐CeO2/Al2O3catalysts clearly improved the catalytic activities in soot oxidation.Among the prepared catalysts,3DOM Au/20%CeO2/Al2O3showed high catalytic activity and stability in diesel soot oxidation.展开更多
基金supported by the National Natural Science Foundation of China(21325731,21221004 and 51478241)~~
文摘Three-dimensional（3D）ordered mesoporous MnO2 was prepared using KIT-6 mesoporous molecular sieves as a hard template.The material was used for catalytic oxidation of HCHO.The material has high surface areas and the mesoporous characteristics of the template,with cubic symmetry（ia3d）.It consists of a β-MnO2 crystalline phase corresponding to pyrolusite,with a rutile structure.Transmission electron microscopy and X-ray photoelectron spectroscopy showed that the 3D-MnO2 catalyst has a large number of exposed Mn4＋ ions on the（110）crystal plane surfaces,with a lattice spacing of 0.311 nm; this enhances oxidation of HCHO.Complete conversion of HCHO to CO2 and H2O was achieved at 130 °C on 3D-MnO2; the same conversions on α-MnO2 and β-MnO2 nanorods were obtained at 140 and 180 °C,respectively,under the same conditions.The specific mesoporous structure,high specific surface area,and large number of surface Mn4＋ ions are responsible for the catalytic activity of 3D-MnO2 in HCHO oxidation.
基金supported by the National Natural Science Foundation of China(21673142)National Engineering Laboratory for Mobile Source Emission Control Technology(NELMS2017A05)+1 种基金PetroChina Innovation Foundation(2018D-5007-0505)Science Foundation of China University of Petroleum,Beijing(242017QNXZ02,2462018BJC005)~~
文摘Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray scattering elemental mapping, X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and temperature-programmed reduction of H2. Further, their catalytic activity in soot combustion was determined by temperature-programmed oxidation reaction. K substitution into the LaNiO3 lattice led to remarkably improved catalytic activity of this catalyst in soot combustion. Amongst various catalysts, La0.95K0.05NiO3 exhibited the highest activity in soot combustion (with its T50 and CO2 S values being 338 °C and 98.2%, respectively), which is comparable to the catalytic activities of Pt-based catalysts under the condition of poor contact between the soot and the catalyst. K-substitution improves the valence state of Ni and increases the number of oxygen vacancies, thereby leading to increased density of surface-active oxygen species. The active oxygen species play a vital role in catalyzing the elimination of soot. The perovskite-type La1?xKxNiO3 nanocatalysts with 3DOM structure without noble metals have potential for practical applications in the catalytic combustion of diesel soot particles.
基金Projects(U1802254,51871201)supported by the National Natural Science Foundation of ChinaProject(LY18E040003)supported by the Zhejiang Provincial Natural Science Foundation,China
文摘Three-dimensional ordered macro/mesoporous carbon(3DOM/m-C)with high specific surface area was synthesized by colloid crystal template method with chemical activation by KOH and used as the adsorbent for removing malachite green(MG)in aqueous solution.The microstructures of the adsorbents were characterized by FESEM,TEM and BET,and the effects of initial dye concentration,contact time,solution pH,and temperature on adsorption performance were investigated.The results show that the 3DOM/m-C exhibits extremely high adsorption capacity of 3541.1 mg/g within 2 h,which could be attributed to the novel ordered hierarchical structure with mesopores on three-dimensional ordered macroporous carbon walls.And the adsorption behavior conforms to the pseudo-second-order kinetic and Langmuir adsorption isotherm.3DOM/m-C can be recycled after being desorbed by absolute ethanol,and still maintains a high capacity of 2762.06 mg/g after 5 cycles.
基金supported by the Reserve Talents Project of Yunnan Province(2013HB068)Applied Basic Research Program of Yunnan Province(2014FB127)
文摘The three-dimensional ordered macroporous CeO2：Yb,Er materials were prepared, and the influence of doping concentra- tion of Yb3＋ or Er3＋ ions on upconversion property was investigated. Green and red upconversion emissions were observed under the excitation of 980 nm at room temperature. It was found that the ratio of red to green upconversion emission intensity increased with increasing of concentration of the Yb3＋ or Er3＋ ions in the three-dimensional ordered macroporous CeO2：Yb,Er materials. When the concentration of Yb3＋ was 10 mol%, pure red upconversion emission was obtained. The varied mechanism of ratio of red to green upconversion emission intensity was discussed with the concentration of Yb3＋ or Er3＋ ions.
基金the financial support from the National Natural Science Foundation of China(Nos.21722604 and 21776116)China Postdoctoral Science Foundation(2020M671365)+2 种基金Jiangsu Postdoctoral Research Funding Program(No.2021K343C)Natural Science Foundation of Jiangsu Province(No.BK20190243)the Society Development Fund of Zhenjiang City(SH2020020)。
文摘A series of three-dimensional ordered macroporous(3 DOM)W-TiO_(2)catalysts have been prepared through a facile colloidal crystal template method.The prepared materials characterized in detail exhibited enhanced catalytic activity in aerobic oxidative desulfurization process.The experimental results indicated that the as-prepared materials possessed excellent 3 DOM structure,which is beneficial for the catalytic activity.The sample 3 DOM W-TiO_(2)-20 exhibited the highest activity in ODS process,and the sulfur removal can reach 98%in 6 h.Furthermore,the oxidative product was also analyzed in the reaction process.
基金financially supported by the National Key R&D Program of China (No.2021YFB2401902)。
文摘Electrocatalytic reduction of carbon dioxide(CO_(2)RR) into high value-added chemicals and fuels has been regarded as a promising approach to achieve carbon neutrality.Though nickel-nitrogen-carbon(Ni-N-C) electrocatalysts have shown superior CO_(2)RR performance,the synthesis of highly effective Ni-N-C catalyst is still challenging.Herein,a three-dimensional(3D) ordered porous nitrogendoped carbon-supported Ni-N_(x) catalyst has been synthesized by direct pyrolysis of a mixture of SiO_(2),polyvinyl pyrrolidone,nickel-phenanthroline complex,followed by the removal of the SiO_(2) templates.
基金Ministry of Trade,Industry and Energy,Grant/Award Number:20010095Korea Evaluation Institute of Industrial Technology,Grant/Award Number:20012341。
文摘Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy density.However,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical performance.In this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle effect.OM-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain catenation.The OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.
基金financial support from the China Scholarship Council (CSC) and a scholarship from the Laboratory of Inorganic Materials Chemistry,Universitéde Namur,Belgiumfinancially supported by the National Postdoctoral Program (Grant No. 2020M672782)+2 种基金the National Natural Science Foundation of China (Grant No. U1663225)the the Program of Introducing Talents of Discipline to Universities-National 111 Project from the Ministry of Science and Technology and the Ministry of Education of China (Grant No. B20002)the National Key R&D Program of China (Grant No. 2016YFA0202602)。
文摘Developing host materials with high specific surface area, good electron conductivity, and fast ion transportation channel is critical for high performance lithium-selenium(Li-Se) batteries. Herein, a series of three dimensional ordered hierarchically porous carbon(3D OHPC) materials with micro/meso/macropores are designed and synthesized for Li-Se battery. The porous structure is tuned by following the concept of the generalized Murray’s law to facilitate the mass diffusion and reduce ion transport resistance.The optimized 3D Se/OHPC cathode exhibits a very high 2 nd discharge capacity of 651 m Ah/g and retains 361 m Ah/g after 200 cycles at 0.2 C. Even at a high current rate of 5 C, the battery still shows a discharge capacity as high as 155 m Ah/g. The improved electrochemical performance is attributed to the synergy effect of the interconnected and well-designed micro, meso and macroporosity while shortened ions diffusion pathways of such Murray materials accelerate its ionic and electronic conductivities leading to the enhanced electrochemical reaction. The diffusivity coefficient in Se/OHPC can reach a very high value of 1.3 × 10^(-11)cm^(2)/s, much higher than those in single pore size carbon hosts. Their effective volume expansion accommodation capability and reduced dissolution of polyselenides ensure the high stability of the battery. This work, for the first time, established the clear relationship between textural properties of cathode materials and their performance and demonstrates that the concept of the generalized Murray’s law can be used as efficient guidance for the rational design and synthesis of advanced hierarchically porous materials and the great potential of 3D OHPC materials as a practical high performance cathode material for Li-Se batteries.
基金financially supported by the National Natural Science Foundation of China(Nos.21876164 and U2030203)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘To address the poor mechanical properties of polydimethylsiloxane(PDMS)and enhance the understanding of the reinforcement mechanisms of aerogel network structures in rubber matrices,this study reinforced PDMS using an ordered interconnected three-dimensional montmorillonite(MMT)aerogel network.The average pore diameter of the aerogels was successfully reduced from 11.53μm to 2.51μm by adjusting the ratio of poly(vinyl alcohol)(PVA)to MMT via directional freezing.Changes in the aerogel network were observed in field emission scanning electron microscope(FESEM)images.After vacuum impregnation,the aerogel network structure of the composites was observed using FESEM.Tensile tests indicated that as the pore diameter decreased,the elongation at break of the composites first increased to a peak of329.61%before decreasing,while the tensile strength and Young's modulus continuously increased to their maximum values of 6.29 MPa and24.67 MPa,respectively.Meanwhile,FESEM images of the tensile cracks and fracture surfaces showed that with a reduction in aerogel pore diameter,the degrees of crack deflection and interfacial debonding increased,presenting a rougher fracture surface.These phenomena enable the composites to dissipate substantial energy during tension,thus effectively improving the mechanical strength of the composites.The present work elucidates the bearing of ordered three-dimensional aerogel network structures on the performance of rubber matrices and provides crucial theoretical insights and technical guidance for the creation and optimization of high-performance PDMS-based composites.
基金supported by the National Natural Science Foundation of China(21177160,21303263,21477164)Beijing Nova Program(Z141109001814072)+1 种基金Specialized Research Fund for the Doctoral Program of High Education of China(20130007120011)the Science Foundation of China University of Petroleum-Beijing(2462013YJRC13,2462013BJRC003)~~
文摘A series of K-doped Mn0.5Ce0.5Oδ （K-MCO） catalysts with three-dimensionally ordered macroporous （3DOM） structure and different K loadings were successfully synthesized using simple methods. These catalysts exhibited well-defined 3DOM nanostructure, which consisted of extensive interconnecting networks of spherical voids. The effects of the calcination temperature and calcination time on the morphological characteristics and crystalline forms of the catalysts were systematically studied. The catalysts showed high catalytic activity for the combustion of soot. 3DOM 20% K-MCO-4h catalyst, in particular, showed the highest catalytic activity of all of the catalysts studied （e.g., Ts0 = 331 ~C and Smco2 = 95.3%）. The occurrence of structural and synergistic effects among the K, Mn, and Ce atoms in the catalysts was favorable for enhancing their catalytic activity towards the combustion of diesel soot. Furthermore, the temperatures required for the complete combustion of the soot （〈400 ℃） were well within the exhaust temperature range （175-400 ℃）, which means that the accumulated soot can be removed under the conditions of the diesel exhaust gas. These catalysts could therefore be used in numerous practical applications because they are easy to synthesize, exhibit high catalytic activity, and can be made from low cost materials.
基金supported by the National Natural Science Committee of China-Liaoning Provincial People's Government Joint Fund(U1908204)National Natural Science Foundation of China(21876006,21976009,and 21961160743)+2 种基金Foundation on the Creative Research Team Construction Promotion Project of Beijing Municipal Institutions(IDHT20190503)Natural Science Foundation of Beijing Municipal Commission of Education(KM201710005004)Development Program for the Youth Outstanding-Notch Talent of Beijing Municipal Commission of Education(CIT&TCD201904019)。
文摘Developing the alternative supported noble metal catalysts with low cost,high catalytic efficiency,and good resistance toward carbon dioxide and water vapor is critically demanded for the oxidative removal of volatile organic compounds(VOCs).In this work,we prepared the mesoporous chromia-supported bimetallic Co and Ni single-atom(Co_(1)Ni_(1)/meso-Cr_(2)O_(3))and bimetallic Co and Ni nanoparticle(Co_(NP)Ni_(NP)/mesoCr_(2)O_(3))catalysts adopting the one-pot polyvinyl pyrrolidone(PVP)-and polyvinyl alcohol(PVA)-protecting approaches,respectively.The results indicate that the Co_(1)Ni_(1)/meso-Cr_(2)O_(3)catalyst exhibited the best catalytic activity for n-hexane(C_(6)H_(14))combustion(T_(50%)and T_(90%)were 239 and 263℃ at a space velocity of 40,000 mL g^(-1)h^(-1);apparent activation energy and specific reaction rate at 260℃ were 54.7 kJ mol^(-1)and 4.3×10^(-7)mol g^(-1)_(cat)s^(-1),respectively),which was associated with its higher(Cr^(5+)+Cr^(6+))amount,large n-hexane adsorption capacity,and good lattice oxygen mobility that could enhance the deep oxidation of n-hexane,in which Ni_(1) was beneficial for the enhancements in surface lattice oxygen mobility and low-temperature reducibility,while Co_(1) preferred to generate higher contents of the high-valence states of chromium and surface oxygen species as well as adsorption and activation of n-hexane.n-Hexane combustion takes place via the Mars van Krevelen(MvK)mechanism,and its reaction pathways are as follows:n-hexane→olefins or 3-hexyl hydroperoxide→3-hexanone,2-hexanone or 2,5-dimethyltetrahydrofuran→2-methyloxirane or 2-ethyl-oxetane→acrylic acid→CO_x→CO_(2)and H_(2)O.
基金supported by Key Research and Development Program of Ministry of Science and Technology of the People’s Republic of China(MOST)(No.2017YFE0131200)for collaboration between China and PolandNational Nature Science Foundation of China(NSFC)(Nos.22072095,U1908204,21761162016)+3 种基金General Projects of Liaoning Province Natural Fund(No.2019-MS-284)National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2018A04)University level innovation team of Shenyang Normal University,Major Incubation Program of Shenyang Normal University(No.ZD201901)supported by the Research Grants Council(RGC)of Hong Kong through NSFC/RGC Joint Research Scheme(No.N_CUHK451/17)。
文摘The performance of catalysts used in after-treatment systems is the key factor for the removal of diesel soot,which is an important component of atmosphericfine particle emissions.Herein,three-dimensionally ordered macroporous–mesoporous Ti_(x)Si+(1-x)O_(2)(3DOM-m Ti_(x)Si+(1-x)O_(2))and its supported MnO_(x)catalysts doped with different alkali/alkaline-earth metals(AMnO_(x)/3 DOM-m Ti_(0.7)Si_(0.3)O_(2)(A:Li,Na,K,Ru,Cs,Mg,Ca,Sr,Ba))were prepared by mesoporous template(P123)-assisted colloidal crystal template(CCT)and incipient wetness impregnation methods,respectively.Physicochemical characterizations of the catalysts were performed using scanning electron microscopy,X-ray diffraction,N_(2)adsorption–desorption,H_(2)temperature-programmed reduction,O_(2)temperature-programmed desorption,NO temperature-programmed oxidation,and Raman spectroscopy techniques;then,we evaluated their catalytic performances for the removal of diesel soot particles.The results show that the 3DOM-m Ti_(0.7)Si_(0.3)O_(2)supports exhibited a well-defined 3DOM-m nanostructure,and AMnO_(x)nanoparticles with 10–50 nm were evenly dispersed on the inner walls of the uniform macropores.In addition,the as-prepared catalysts exhibited good catalytic performance for soot combustion.Among the prepared catalysts,CsMnO_(x)/3DOM-m Ti_(0.7)Si_(0.3)O_(2)had the highest catalytic activity for soot combustion,with T10,T50,and T90(the temperatures corresponding to soot conversion rates of 10%,50%,and 90%)values of 285,355,and 393℃,respectively.The high catalytic activity of the CsMnO_(x)/3 DOM-m Ti_(0.7)Si_(0.3)O_(2)catalysts was attributed to their excellent low-temperature reducibility and homogeneous macroporous–mesoporous structure,as well as to the synergistic effects between Cs and Mn species and between CsMnO_(x)and the Ti_(0.7)Si_(0.3)O_(2)support.
基金the National Nature Science Foundation of China(No.21476177)
文摘Three-dimensionally ordered（3DOM） macroporous phosphotungstic acid/SiO_2（HPW/SiO_2） materials were prepared by using colloidal crystal as templates and applied for oxidative desulfurization（ODS） of the model fuel oil. The obtained HPW/SiO_2 materials were characterized through scanning electron microscopy, powder X-ray diffraction, N_2 sorption, and Fourier transform infrared spectroscopy. The results indicated that 3 DOM HPW/SiO_2 possessed hierarchical pore architectures which contained ordered macropores and disordered mesopores, with the Keggin type HPW embedded in the framework of pore structure. The removal rate of dibenzothiophene（DBT） could reach 100% under the optimum conditions, moreover. The performance was only slightly decreased for the regenerated catalyst after 7 cycles.
基金supported by National Natural Science Funds for Young Scholar(No.50903027)the Natural Science Foundation of Hebei Province(No.E2010000058)Education Department Science Research Plan of Hebei Province(No.2007307).
文摘A versatile and effective method for incorporating functional groups on the pore wall of three-dimensionally ordered macroporous cross-linked polystyrene（3DOM CLPS） by hydrophilic spacer arm has been investigated.The 3DOM CLPS with pore size 865 nm was prepared by sacrifice template method.The hydrophilic spacer arm（polyethylene glycol,molecular weight is 600） was grafted to the 3DOM CLPS via nucleophilic substitution reaction.The other side of active hydroxyl can be further converted into a lot of other functional groups.In this report,the chelating ligand 2-mercaptobenzothiazole（MBZ） group was introduced on the end of the PGE chain to evidence the versatile functionalization approach.The functionalized ordered macroporous materials were characterized by FT-IR,element analyzer,SEM.The results reveal that the pores were successfully bonded with 2-mercaptobenzothiazole groups via hydrophilic spacer arms and the original morphology of ordered macroporous materials were remained after functionalization.The MBZ group density is 0.052 mmol/m^2.The functionalized 3DOM CLPS are expected to application as heavy metal ions adsorbent.
基金Supported by the National Natural Science Foundation of China (Grant No. 20635020)
文摘A novel type of glucose sensor was fabricated based on a glucose oxidase(GOD)-N,N-dimethtylformamide(DMF)-[BMIm][BF4] composites modified three-dimensional ordered macroporous(3DOM) gold film electrode.The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions(PBS),which could be attributed to the redox of flavin adenine dinucleotide(FAD) in GOD.The research results show that ionic liquid([BMIm][BF4]),DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks.It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD.Simultaneously,the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode.The synergetic effect of DMF can help the GOD to maintain its bioactivity better.GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose,and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ.The apparent Km(Michaelis-Menten constant) for the enzymatic reaction is 0.018 mM.
文摘Objective:To analyze the diagnostic value of transvaginal three-dimensional ultrasound(3D-TVS)in evaluating endometrial receptivity(ER)for ovulation disorder infertility(ODI),and to investigate the impact of subendometrial endometrial vascular index(VI)and endometrial vascular flow index(VFI)levels on ODI.Methods:A total of 110 patients diagnosed with ODI admitted between January 2023 and June 2024 were selected.All patients underwent ovulation induction therapy,3D-TVS examination,and sex hormone testing.Based on pregnancy outcomes,patients were divided into a successful pregnancy group(73 cases)and an unsuccessful pregnancy group(37 cases).ER parameters,sex hormone levels,and endometrial blood flow patterns were compared between the two groups.Receiver operating characteristic(ROC)curves were plotted to evaluate the predictive value of ER for ODI.Results:The spiral artery peak systolic velocity(PSV),endometrial volume(EMV),endometrial flow index(FI),and VFI in the successful pregnancy group were significantly higher than those in the unsuccessful pregnancy group(p<0.05).No significant differences were observed in other ER parameters between the two groups(p>0.05).There was no significant difference in sex hormone levels between the two groups on the day of human chorionic gonadotropin(hCG)treatment(p>0.05).Among the endometrial blood flow classifications in the pregnant group,the proportion of Type II was lower than that in the nonpregnant group(p<0.05).The Receiver Operating Characteristic(ROC)curve demonstrated that the area under the curve(AUC)for Endometrial Volume(EMV)in predicting pregnancy after Ovarian Dysfunction Infertility(ODI)treatment was 0.854,with a sensitivity of 92.61%and a specificity of 71.75%.The AUC for Vascularization Index(VI)was 0.771,with a sensitivity of 52.18%and a specificity of 88.70%.The AUC for Vascularization Flow Index(VFI)of the endometrium was 0.887,with a sensitivity of 80.01%and a specificity of 69.20%.Conclusion:Three-dimensional transvaginal sonography(3D-TVS)assessment of endometrial receptivity(ER)can effectively detect ODI,and the levels of subendometrial VI and VFI demonstrate superior predictive performance for pregnancy outcomes in this condition,serving as commonly used predictive indicators for the disease.
基金supported by the Ministry of Sciences and Technology of China (863 Programs) (2006AA05Z115, 2007AA05Z104)
文摘Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy（SEM）, X-ray diffractometer（XRD）, high-resolution transmission electron microscopy（HRTEM） and temperature programmed reducfion（TPR） techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift （WGS） reaction in a wide temperature range （180-360 ℃）. The results showed that 3DOM Pt/TiO2 catalyst exhibited obviously better catalytic performance than the corresponding non macro-porous catalyst, owing to the macro-porous structure favoring mass transfer. Addition of celia into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the celia modified catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.
基金supported by the Ministry of Sciences and Technology of China(863 programs,No 2006AA05Z115 and 2007AA05Z104)
文摘Three-dimensionally ordered macro-porous （3DOM） Pt/TiO2 catalysts were prepared by template and impregnation methods, and the resultant samples were characterized by using TG-DTA, XRD, SEM, TEM, and TPR techniques. The catalytic performance for water-gas shift （WGS） reaction was tested, and the influences of some conditions, such as reduction temperature of catalysts, the amount of Pt loadings and space velocity on catalytic performance were investigated. It was shown that Pt particles were homogeneously dispersed on 3DOM TiO2. The reduction of TiO2 surface was important for the catalytic performance. The activity test results showed that the 3DOM Pt/TiO2 catalysts exhibited very good catalytic performance for WGS reaction even at high space velocity, which was owing to the better mass transfer of 3DOM porous structure besides the high intrinsic activity of Pt/TiO2.
基金Supported by the National Natural Science Foundation of China(Nos.20704004, 21074019)the Natural Science Foundation of Jilin Province, China(No.20101539)
文摘The silica opal templates were prepared from three silica colloids of different diameters of 230 nm, 500 nm and 1.5 mm by a filtration route. The large-scale stable opal template membranes after sintering the deposited SiO2 opal template can be successfully obtained by optimizing the pH value and NaCl concentration in silica colloidal solutions. The three-dimensionally ordered macroporous（3DOM） polyimide membranes without crack were fabricated by reproducing the structure of silica opal template. We prepared the pore-filling composite proton exchange membranes by filling the 3DOM structure with proton conducting organosilane sol. The result indicates that the composite membranes exhibit higher water uptake than pure filling organosilane gel. The proton conductivity increased with the increasing of pore cell in composite membranes.
基金supported by the National High Technology Research and Development Program of China(863 Program,2015AA034603)the National Natural Science Foundation of China(21477146,21673142 and 21303263)+2 种基金the Beijing Nova Program(Z141109001814072)the Specialized Research Fund for the Doctoral Program of Higher Education(20130007120011)the Science Foundation of China University of Petroleum-Beijing(YJRC-2013-13,2462013BJRC003)~~
文摘A series of catalysts consisting of three‐dimensionally ordered macroporous(3DOM)x‐CeO2/Al2O3‐supported Au nanoparticles(x=2,10,20,and40wt%)were successfully synthesized using a reduction‐deposition method.These catalysts were characterized using scanning electron microscopy,the Brunauer‐Emmett‐Teller method,X‐ray diffraction,transmission electron microscopy,ultraviolet‐visible spectroscopy,and temperature‐programmed reduction by H2.Au nanoparticles of mean particle size5nm were well dispersed and supported on the inner walls of uniform macropores.The3DOM structure improved the contact efficiency between soot and the catalyst.An Al‐Ce‐O solid solution was formed in the multilayer support,i.e.,x‐CeO2/Al2O3,by the incorporation of Al3+ions into the CeO2lattice,which resulted in the creation of extrinsic oxygen vacancies.Strong interactions between the metal(Au)and the support(Ce)increased the amount of active oxygen species,and this promoted soot oxidation.The catalytic performance in soot combustion was evaluated using a temperature‐programmed oxidation technique.The presence of CeO2nanolayers in the3DOM Au/x‐CeO2/Al2O3catalysts clearly improved the catalytic activities in soot oxidation.Among the prepared catalysts,3DOM Au/20%CeO2/Al2O3showed high catalytic activity and stability in diesel soot oxidation.
