Human skin exhibits a remarkable capability to perceive contact forces and environmental temperatures,providing complex information that is essential for its subtle control.Despite recent advancements in soft tactile ...Human skin exhibits a remarkable capability to perceive contact forces and environmental temperatures,providing complex information that is essential for its subtle control.Despite recent advancements in soft tactile sensors,accurately decoupling signals—specifically separating forces from directional orientation and temperature—remains a challenge thus resulting in failure to meet the advanced application requirements of robots.This study proposes,F3T,a multilayer soft sensor unit designed to achieve isolated measurements and mathematical decoupling of normal pressure,omnidirectional tangential forces,and temperature.We developed a circular coaxial magnetic film featuring a floating mount multilayer capacitor that facilitated the physical decoupling of normal and tangential forces in all directions.Additionally,we incorporated an ion gel-based temperature-sensing film into the tactile sensor.The proposed sensor was resilient to external pressures and deformations,and could measure temperature and significantly eliminate capacitor errors induced by environmental temperature changes.In conclusion,our novel design allowed for the decoupled measurement of multiple signals,laying the foundation for advancements in high-level robotic motion control,autonomous decision-making,and task planning.展开更多
Robot-assisted minimally invasive surgery(RMIS)has attracted notable attention because of its numerous advantages over traditional surgery.Nevertheless,the lack of real-time force feedback in RMIS can result in surgic...Robot-assisted minimally invasive surgery(RMIS)has attracted notable attention because of its numerous advantages over traditional surgery.Nevertheless,the lack of real-time force feedback in RMIS can result in surgical errors and damage to delicate tissues.The stringent requirements for the sensitivity and volume of force sensors in RMIS make the design and fabrication of such sensors a considerable challenge.Herein,we present a high-sensitivity three-dimensional(3D)force sensing module consisting of a micro-electro-mechanical piezoresistive sensor chip and a polydimethylsiloxane cap with pyramidal microstructures for force transmission.The sensor chip incorporates four cantilevers with a circular microhole at their fixed ends to concentrate stress in piezoresistive areas;the shape of the microhole was optimized to ensure an appropriate trade-off between high sensitivity and reliability.The proposed 3D force sensor showed more than twice higher sensitivity in the X-,Y-,and Z-axis directions than the sensor based on traditional cantilevers.Furthermore,the proposed sensor exhibited little hysteresis(<1.91%),good stability,and fast response(~30 ms).An artificial neural network was adopted for 3D force decoupling;this network accurately converted resistance changes into 3D forces,showing a prediction error of<2%.Furthermore,the proposed sensor was integrated into a robot to perform various clamping tasks,exhibiting good application potential for RMIS.展开更多
The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input mult...The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input multi-output,nonlinearity,and strong coupling presents significant challenges.The substantial internal force generated during the adjustment process can potentially damage the LAC and degrade the assembly quality.Hence,a workspace-based hybrid force position control scheme was developed to achieve high quality assembly with high-precision and lower internal force.Firstly,an offline workspace analysis with inherent geometric characteristics to form time-varying posture error constraint.Then,the posture error is integrated into the online position axis control to ensure tracking the ideal posture,while the force control axis compensates for posture deviation by minimizing internal force,thereby achieving high precision and low internal force.Finally,the effectiveness was demonstrated through experiments.The root mean square errors of orientation and position are 104 rad and 0.1 mm,respectively.A reduction in internal force can range from 10.96%to 57.4%compared to the traditional method.Key points'max position error is decreased from 0.32 mm to 0.18 mm,satisfying the 0.5 mm tolerance.Therefore,the proposed method will help promote the development of high-performance manufacturing.展开更多
A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stre...A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stress−strain hysteresis curves of soil profiles on the pile side with and without cement-soil reinforced piles indicates that cement-soil reinforced piles not only bear more tremendous shear stress but also have smaller strains under the action of cyclic shear stress.Furthermore,the cement-soil on the pile side not only shares part of the shear stress and modifies the bending moment distribution but also significantly enhances the resistance of the pile-side soil,reducing the lateral displacement of the superstructure.Cement-soil reinforcement reduced shear strains,inhibited sand liquefaction,and reduced superstructure displacements by 27%−47%(instantaneous)and 40%−65%(permanent).The proportion of horizontal load sharing between cement-soil reinforcement and saturated sand is considered,along with the change pattern of the subgrade reaction after sand liquefaction.An equivalent subgrade reaction calculation method is proposed,which accounts for the horizontal load-sharing ratios of soils with two different strengths.The test results indicate that the pile stress and displacement,estimated using the equivalent subgrade reaction,are in good agreement with the observed results.展开更多
Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in...Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in-situ observed results of the collision process of different types of inclusions on the surface of the molten steel.The developed model can be used to calculate the attraction of inclusions on the surface of the molten steel including Al_(2)O_(3)MgO,SiO_(2),etc.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy re...High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy receives little attention.This paper conducts grinding simulation and surface grinding experiments on FeCoCrNi high entropy and alloys to analyze the grinding removal mechanism of the FeCoCrNi-based High entropy alloy.We also discuss the influence of grinding parameters,element types,element content and forming methods on grinding force and sub-surface plastic deformation after grinding.The simulation and experimental results show that as the increase of grinding depth,both tangential grinding force and normal grinding force increase,and the thickness of sub-surface plastic deformation layer decreases.With the increase of grinding speed,both tangential grinding force and normal grinding force decrease,and the thickness of sub-surface plastic deformation layer caused by grinding process shows a trend of gradual decrease.Under the same processing parameters,the normal grinding force is greater than the tangential grinding force.In FeCoCrNi series high entropy alloys,the grinding force and subsurface plastic deformation layer thickness of high entropy alloys increased with the addition in Ti content.The grinding force and plastic deformation formed by adding Ti element are greater than those formed by adding Al element,and High entropy alloys prepared using laser cladding method exhibit greater grinding force and plastic deformation than those prepared using selective laser melting method.The research results provide theoretical reference and experimental basis for high-quality grinding of high entropy alloys,which may be helpful for the design and manufacturing of high entropy alloy parts.展开更多
The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to res...The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to reshape talent cultivation but also presents significant challenges,including skill hollowing,ethical risks,and a growing disconnect between education and industry needs.Currently,graduate-level software engineering education struggles with outdated curricula and insufficient alignment with practical demands.In this paper,we propose a dual-core collaborative framework driven by“GenAI technology”and“industry demand”.Under this framework,we design a four-dimensional capability development path to enhance graduate students’innovation in software engineering practice.This path focuses on①scientific research innovation,②engineering problem-solving,③cross-domain collaborative evolution,and④ethical risk governance.The proposed approach promotes a shift from traditional knowledge transfer to human-machine collaborative innovation,aligning talent cultivation with the demands of the NQPF.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to smal...Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to small particles within the dipole regime or specific light fields,thereby lacking universality and sometimes leading to ambiguity.To overcome these limitations,we establish a fully analytical and comprehensive framework for optical force/torque based on the Cartesian multipole expansion theory,which is applicable to arbitrary-sized bi-isotropic(chiral)spherical particles immersed in arbitrary monochromatic optical fields.Rigorous expressions are thus derived,which explicitly bridge the optical force/torque with particle-propertydependent coefficients and“force/torque source”quantities characterizing the incident light structures.Such quantities identify the ultimate physical origins of optical force/torque and are systematically classified into four categories based on their parity(P)and duality(D)symmetries.Each category interacts selectively with particles exhibiting specific P and D(a)symmetries,thus inducing distinct optical forces or torques with characteristic physical behaviors.This classification establishes the mutual symmetry-breaking criteria necessary for both particles and light beams to generate optical force/torque,offering a physics-based roadmap for engineering optical manipulations such as chirality sorting,light-driven micromotors,and beyond.展开更多
In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is under...In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is undergoing a profound paradigm shift.The traditional rural division of labor pattern,which depends on tangible factors such as land,labor,and capital,has increasingly encountered developmental challenges characterized by diminishing marginal returns and a detrimental cycle of internal competition.The new quality productive force,centered on data,algorithms,green technologies,bioengineering,and clean energy,offers a potential pathway for the rural division of labor system to overcome the"low-level equilibrium".This force is characterized by attributes such as non-exclusivity,replicability,network collaboration,and ecological compatibility.This paper develops a three-dimensional collaborative analytical framework encompassing"technology,institution,and culture".It systematically elucidates the internal logic by which new quality productive forces drive the transformation of the rural division of labor from"quantitative factor matching"to"qualitative structural reorganization"through three principal mechanisms:technology embedding,institutional reconstruction,and cultural coupling.Furthermore,the study proposes corresponding policy recommendations,thereby offering theoretical insights to support the modernization of China s agriculture and rural areas,as well as the development of a strong agricultural country.展开更多
The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexi...The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexible ball-end body-armor-like abrasive tool(BAAT)can effectively remove micro-convex peaks from the surfaces of brittle materials by employing a high tangential grinding force and a low normal grinding force,thereby achieving nano-level surface roughness and ultra-smooth mirror finishes.However,the surface contact me-chanism,pressure distribution pattern,and grinding force behavior between BAAT and workpiece remain in-adequately understood.This study examines the mechanism of liquid film formation and the distribution pattern of elastohydrodynamic pressure in high-shear and low-pressure grinding areas,drawing on the theories of elastohydrodynamic lubrication,non-Newtonian fluid dynamics,and material mechanics.A high-shear low-pressure grinding force model,which incorporates elastohydrodynamic liquid film thickness and abrasive grain size,was developed.The effects of the main grinding parameters(normal load,spindle rotational speed,and abrasive grain size)on the tangential grinding force were investigated through the processing of lithium niobate crystals using an intelligent precision-grinding system.The experimental results indicated that the relative error between the predicted and experimental values was 10.74%,thereby confirming the accuracy of the grinding force model.This study advances the understanding of elastohydrodynamic lubrication mechanisms in abrasive machining and provides a crucial theoretical foundation for the application of flexible ball-end BAAT.展开更多
Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properti...Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.展开更多
Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation ...Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation plan is a key step in the organizational planning.Based on the description of the problem and the definition of organizational elements,the matching model of platform-target attack wave is constructed to minimize the redundancy of command and decision-making capability,resource capability and the number of platforms used.Based on the non-dominated sorting genetic algorithmⅢ(NSGA-Ⅲ)framework,which includes encoding/decoding method and constraint handling method,the generation model of organizational force formation plan is solved,and the effectiveness and superiority of the algorithm are verified by simulation experiments.展开更多
The state of roof collapse in tunnels is actually three-dimensional, so constructing a three-dimensional failure collapse mechanism is crucial so as to reflect the realistic collapsing scopes more reasonably. Accordin...The state of roof collapse in tunnels is actually three-dimensional, so constructing a three-dimensional failure collapse mechanism is crucial so as to reflect the realistic collapsing scopes more reasonably. According to Hoek-Brown failure criterion and the upper bound theorem of limit analysis, the solution for describing the shape of roof collapse in circular or rectangular tunnels subjected to seepage forces is derived by virtue of variational calculation. The seepage forces calculated from the gradient of excess pore pressure distribution are taken as external loading in the limit analysis, and it is of great convenience to compute the pore pressure with pore pressure coefficient. Consequently, the effect of seepage forces is taken as a work rate of external force and incorporated into the upper bound limit analysis. The numerical results of collapse dimensions with different rock parameters show great validity and agreement by comparing with the results of that with two-dimensional failure mechanism.展开更多
In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision sca...In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision scanning platform is designed to achieve fast servo through moving probe and sample simultaneously,and several combined nanopositioning stages are used to guarantee linearity and orthogonality of displacement.To eliminate the signal deviation caused by AFM-head movement,a traceable optical lever system is designed for cantilever deformation detection.In addition,a method of tailoring the cantilever of commercial probe with flared tip is proposed to reduce the lateral force applied on the tip in measurement.The tailored probe is mounted on the 3D-AFM,and 3D imaging experiments are conducted on different samples by use of adaptive-angle scanning strategy.The results show the roob-mean-square value of the vertical displacement noise(RMS)of the prototype is less than 0.1 nm and the high/width measurement repeatability(peak-to-peak)is less than 2.5 nm.展开更多
Urban expansion is a phenomenon of urban space increase,and an important measuring index of the process of urbanization.Taking Shanghai as an example,the changes of urban average height and built-up area were studied ...Urban expansion is a phenomenon of urban space increase,and an important measuring index of the process of urbanization.Taking Shanghai as an example,the changes of urban average height and built-up area were studied to represent city's vertical and horizontal increases respectively,and statistical methods were used to analyze the driving forces of urban expansion.The research drew following conclusions:1) The urban expansion process of Shanghai from 1985 to 2006 had a clear periodic feature,and could be divided into three stages:vertical expansion in dominance,coordinated vertical and horizontal expansion,and horizontal expansion in dominance.2) The average height and quantity of buildings in core city were significantly bigger than those in suburbs,but the changing speed of the latter was faster.And 3) urbanization process was the major driving force for the city's horizontal expansion,while industrial structure improvement was the key driving factor for the vertical expansion.Those two driving forces were simultaneously affected by city's political factors.展开更多
Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of...Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of the factor of safety. Parametric studies were carried out to explore the end effects of the slope failures and the effects of the pile location and diameter on the safety of the reinforced slopes. The results demonstrate that the end effects nearly have no effects on the most suitable location of the installed piles but have significant influence on the safety of the slopes. For a slope constrained to a narrow width, the slope becomes more stable owing to the contribution of the end effects. When the slope is reinforced with a row of piles in small space between piles, the effects of group piles are significant for evaluating the safety of slopes. The presented method is more appropriate for assessing the stability of slopes reinforced with piles and can be also utilized in the design of plies stabilizing the unstable slopes.展开更多
Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body ...Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body force. This method can be used to solve the elasticity problems with body force without domain integral, which is inevitable by HBNM. To demonstrate the versatility and the fast convergence of this method, some numerical examples of 3-D elasticity problems with body forces are examined. The computational results show that the present method is effective and can be widely applied in solving practical engineering problems.展开更多
In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow e...In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow equation.The velocity and pressure are computed simultaneously.The accuracy of velocity is improved one order.The concentration equation is solved by using mixed finite element,multi-step difference and upwind approximation.A multi-step method is used to approximate time derivative for improving the accuracy.The upwind approximation and an expanded mixed finite element are adopted to solve the convection and diffusion,respectively.The composite method could compute the diffusion flux and its gradient.It possibly becomes an eficient tool for solving convection-dominated diffusion problems.Firstly,the conservation of mass holds.Secondly,the multi-step method has high accuracy.Thirdly,the upwind approximation could avoid numerical dispersion.Using numerical analysis of a priori estimates and special techniques of differential equations,we give an error estimates for a positive definite problem.Numerical experiments illustrate its computational efficiency and feasibility of application.展开更多
基金support by Hong Kong RGC General Research Fund(16217824,16213825,16203923,and 16217824)National Natural Science Foundation of China(N_HKUST638/23)+1 种基金Research Grants Council Joint Research Scheme(62361166630)Guangdong Basic and Applied Basic Research Foundation(2023B1515130007).
文摘Human skin exhibits a remarkable capability to perceive contact forces and environmental temperatures,providing complex information that is essential for its subtle control.Despite recent advancements in soft tactile sensors,accurately decoupling signals—specifically separating forces from directional orientation and temperature—remains a challenge thus resulting in failure to meet the advanced application requirements of robots.This study proposes,F3T,a multilayer soft sensor unit designed to achieve isolated measurements and mathematical decoupling of normal pressure,omnidirectional tangential forces,and temperature.We developed a circular coaxial magnetic film featuring a floating mount multilayer capacitor that facilitated the physical decoupling of normal and tangential forces in all directions.Additionally,we incorporated an ion gel-based temperature-sensing film into the tactile sensor.The proposed sensor was resilient to external pressures and deformations,and could measure temperature and significantly eliminate capacitor errors induced by environmental temperature changes.In conclusion,our novel design allowed for the decoupled measurement of multiple signals,laying the foundation for advancements in high-level robotic motion control,autonomous decision-making,and task planning.
基金supported by the National Natural Science Foundation of China(Grant No.62401385)the Natural Science Foundation of Jiangsu Province(Grant No.BK20240803)+1 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(Grant No.24KJB460025)the Open Fund of State Key Laboratory of Precision Measurement Technology and Instruments(Grant No.Pilab2413)。
文摘Robot-assisted minimally invasive surgery(RMIS)has attracted notable attention because of its numerous advantages over traditional surgery.Nevertheless,the lack of real-time force feedback in RMIS can result in surgical errors and damage to delicate tissues.The stringent requirements for the sensitivity and volume of force sensors in RMIS make the design and fabrication of such sensors a considerable challenge.Herein,we present a high-sensitivity three-dimensional(3D)force sensing module consisting of a micro-electro-mechanical piezoresistive sensor chip and a polydimethylsiloxane cap with pyramidal microstructures for force transmission.The sensor chip incorporates four cantilevers with a circular microhole at their fixed ends to concentrate stress in piezoresistive areas;the shape of the microhole was optimized to ensure an appropriate trade-off between high sensitivity and reliability.The proposed 3D force sensor showed more than twice higher sensitivity in the X-,Y-,and Z-axis directions than the sensor based on traditional cantilevers.Furthermore,the proposed sensor exhibited little hysteresis(<1.91%),good stability,and fast response(~30 ms).An artificial neural network was adopted for 3D force decoupling;this network accurately converted resistance changes into 3D forces,showing a prediction error of<2%.Furthermore,the proposed sensor was integrated into a robot to perform various clamping tasks,exhibiting good application potential for RMIS.
基金co-supported by the National Natural Science Foundation of China(No.52125504)the Liaoning Revitalization Talents Program(No.XLYC2202017)Dalian Support Policy Project for Innovation of Technological Talents(No.2023RG001)。
文摘The high-quality assembly of Large Aircraft Components(LACs)is essential in modern aviation manufacturing.Numerical control locators are employed for the posture adjustment of LAC,yet the system's multi-input multi-output,nonlinearity,and strong coupling presents significant challenges.The substantial internal force generated during the adjustment process can potentially damage the LAC and degrade the assembly quality.Hence,a workspace-based hybrid force position control scheme was developed to achieve high quality assembly with high-precision and lower internal force.Firstly,an offline workspace analysis with inherent geometric characteristics to form time-varying posture error constraint.Then,the posture error is integrated into the online position axis control to ensure tracking the ideal posture,while the force control axis compensates for posture deviation by minimizing internal force,thereby achieving high precision and low internal force.Finally,the effectiveness was demonstrated through experiments.The root mean square errors of orientation and position are 104 rad and 0.1 mm,respectively.A reduction in internal force can range from 10.96%to 57.4%compared to the traditional method.Key points'max position error is decreased from 0.32 mm to 0.18 mm,satisfying the 0.5 mm tolerance.Therefore,the proposed method will help promote the development of high-performance manufacturing.
基金Project(52078129)supported by the National Natural Science Foundation of ChinaProject(MTF2023009)supported by the Open Project of Key Laboratory of Transport Industry of Comprehensive Transportation Theory(Nanjing Modern Multimodal Transportation Laboratory),ChinaProject(2242024K40037)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A shaking table test was performed to investigate the different responses of piles with and without cement-soil reinforcement,considering both inertial and kinematic interactions.A comparison of the dynamic shear stress−strain hysteresis curves of soil profiles on the pile side with and without cement-soil reinforced piles indicates that cement-soil reinforced piles not only bear more tremendous shear stress but also have smaller strains under the action of cyclic shear stress.Furthermore,the cement-soil on the pile side not only shares part of the shear stress and modifies the bending moment distribution but also significantly enhances the resistance of the pile-side soil,reducing the lateral displacement of the superstructure.Cement-soil reinforcement reduced shear strains,inhibited sand liquefaction,and reduced superstructure displacements by 27%−47%(instantaneous)and 40%−65%(permanent).The proportion of horizontal load sharing between cement-soil reinforcement and saturated sand is considered,along with the change pattern of the subgrade reaction after sand liquefaction.An equivalent subgrade reaction calculation method is proposed,which accounts for the horizontal load-sharing ratios of soils with two different strengths.The test results indicate that the pile stress and displacement,estimated using the equivalent subgrade reaction,are in good agreement with the observed results.
基金support from the National Natural Science Foundation of China(Grant No.U22A20171)the National Key Research and Development Program Project(2023YFB3709901)+3 种基金the China Baowu Low Carbon Metallurgical Innovation Fund(BWLCF202315)the Pangang-USTB Vanadium and Titanium Research Institute Research Projectthe High Steel Center(HSC)at North China University of TechnologyYanshan University and University of Science and Technology Beijing,China.
文摘Considering the Hamaker constant,inclusion size,and distance between inclusions on the surface of the molten steel,a new collision model of the inclusions on the surface of the molten steel was established based on in-situ observed results of the collision process of different types of inclusions on the surface of the molten steel.The developed model can be used to calculate the attraction of inclusions on the surface of the molten steel including Al_(2)O_(3)MgO,SiO_(2),etc.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金Supported by National Natural Science Foundation of China(Grant No.52275412)Fundamental Research Funds for the Central Universities of China(Grant No.N2403015).
文摘High entropy alloy attracts widespread attention due to its excellent mechanical properties.It becomes a new type of alloy material with high application potential,but the grinding performance of High entropy alloy receives little attention.This paper conducts grinding simulation and surface grinding experiments on FeCoCrNi high entropy and alloys to analyze the grinding removal mechanism of the FeCoCrNi-based High entropy alloy.We also discuss the influence of grinding parameters,element types,element content and forming methods on grinding force and sub-surface plastic deformation after grinding.The simulation and experimental results show that as the increase of grinding depth,both tangential grinding force and normal grinding force increase,and the thickness of sub-surface plastic deformation layer decreases.With the increase of grinding speed,both tangential grinding force and normal grinding force decrease,and the thickness of sub-surface plastic deformation layer caused by grinding process shows a trend of gradual decrease.Under the same processing parameters,the normal grinding force is greater than the tangential grinding force.In FeCoCrNi series high entropy alloys,the grinding force and subsurface plastic deformation layer thickness of high entropy alloys increased with the addition in Ti content.The grinding force and plastic deformation formed by adding Ti element are greater than those formed by adding Al element,and High entropy alloys prepared using laser cladding method exhibit greater grinding force and plastic deformation than those prepared using selective laser melting method.The research results provide theoretical reference and experimental basis for high-quality grinding of high entropy alloys,which may be helpful for the design and manufacturing of high entropy alloy parts.
基金supported in part by the Graduate Education Reform Research Project of Hubei University of Technology under Grant 2024YB003the Hubei University of Arts and Science,Teaching Research Project,under Grant JY2025018.
文摘The rapid development of new-quality productive forces(NQPF)has intensified the demand for high-level innovative talent.As a representative of NQPF,generative artificial intelligence(GenAI)offers powerful tools to reshape talent cultivation but also presents significant challenges,including skill hollowing,ethical risks,and a growing disconnect between education and industry needs.Currently,graduate-level software engineering education struggles with outdated curricula and insufficient alignment with practical demands.In this paper,we propose a dual-core collaborative framework driven by“GenAI technology”and“industry demand”.Under this framework,we design a four-dimensional capability development path to enhance graduate students’innovation in software engineering practice.This path focuses on①scientific research innovation,②engineering problem-solving,③cross-domain collaborative evolution,and④ethical risk governance.The proposed approach promotes a shift from traditional knowledge transfer to human-machine collaborative innovation,aligning talent cultivation with the demands of the NQPF.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
基金supported by the National Natural Science Foundation of China(Grant Nos.12204117,12564043,12174076,12074084,and 12074169)the Guangxi Science and Technology Project(Grant Nos.2023GXNSFFA026002,2024GXNSFBA010261,2021GXNSFDA196001,and AD23026117)+3 种基金the Open Project of State Key Laboratory of Surface Physics in Fudan University(Grant No.KF2022_15)the Guangdong Province Talent Recruitment Program(Grant No.2021QN02C103)supported by the Research Grants Council of Hong Kong(Grant Nos.16310422 and AoE/P-502/20)the Innovation Project of Guangxi Graduate Education(Grant No.11241018)。
文摘Understanding the complex interplay between structured light and particles is crucial for unlocking advanced optical manipulation techniques.However,existing theories for optical force/torque are often limited to small particles within the dipole regime or specific light fields,thereby lacking universality and sometimes leading to ambiguity.To overcome these limitations,we establish a fully analytical and comprehensive framework for optical force/torque based on the Cartesian multipole expansion theory,which is applicable to arbitrary-sized bi-isotropic(chiral)spherical particles immersed in arbitrary monochromatic optical fields.Rigorous expressions are thus derived,which explicitly bridge the optical force/torque with particle-propertydependent coefficients and“force/torque source”quantities characterizing the incident light structures.Such quantities identify the ultimate physical origins of optical force/torque and are systematically classified into four categories based on their parity(P)and duality(D)symmetries.Each category interacts selectively with particles exhibiting specific P and D(a)symmetries,thus inducing distinct optical forces or torques with characteristic physical behaviors.This classification establishes the mutual symmetry-breaking criteria necessary for both particles and light beams to generate optical force/torque,offering a physics-based roadmap for engineering optical manipulations such as chirality sorting,light-driven micromotors,and beyond.
基金Supported by Key Project of Jiangsu Education Science Planning"Research on the Structural Adjustment of Higher Education in Jiangsu in the Context of High-Quality Economic Development"(B/2021/01/67).
文摘In the context of the coordinated pursuit of"carbon peak and neutrality"objectives,alongside the strategy to establish a robust agricultural nation,the economic and social development of rural areas is undergoing a profound paradigm shift.The traditional rural division of labor pattern,which depends on tangible factors such as land,labor,and capital,has increasingly encountered developmental challenges characterized by diminishing marginal returns and a detrimental cycle of internal competition.The new quality productive force,centered on data,algorithms,green technologies,bioengineering,and clean energy,offers a potential pathway for the rural division of labor system to overcome the"low-level equilibrium".This force is characterized by attributes such as non-exclusivity,replicability,network collaboration,and ecological compatibility.This paper develops a three-dimensional collaborative analytical framework encompassing"technology,institution,and culture".It systematically elucidates the internal logic by which new quality productive forces drive the transformation of the rural division of labor from"quantitative factor matching"to"qualitative structural reorganization"through three principal mechanisms:technology embedding,institutional reconstruction,and cultural coupling.Furthermore,the study proposes corresponding policy recommendations,thereby offering theoretical insights to support the modernization of China s agriculture and rural areas,as well as the development of a strong agricultural country.
基金Supported by National Natural Science Foundation of China(Grant Nos.52575516,51875329)Taishan Scholar Special Foundation of Shandong Province(Grant Nos.tstp20240826,tsqn201812064)+2 种基金Shandong Provincial Natural Science Foundation(Grant No.ZR2023ME112)Key Research and Development Project of the Ningxia Hui Autonomous Region(Grant No.2024BEE02019)Innovation Capacity Improvement Programme for High-tech SMEs of Shandong Province(Grant Nos.2022TSGC1333,2022TSGC1261).
文摘The surfaces of brittle materials are susceptible to defects such as scratches,cracks,and chipping during con-ventional grinding processes,which significantly compromise surface quality and service performance.A flexible ball-end body-armor-like abrasive tool(BAAT)can effectively remove micro-convex peaks from the surfaces of brittle materials by employing a high tangential grinding force and a low normal grinding force,thereby achieving nano-level surface roughness and ultra-smooth mirror finishes.However,the surface contact me-chanism,pressure distribution pattern,and grinding force behavior between BAAT and workpiece remain in-adequately understood.This study examines the mechanism of liquid film formation and the distribution pattern of elastohydrodynamic pressure in high-shear and low-pressure grinding areas,drawing on the theories of elastohydrodynamic lubrication,non-Newtonian fluid dynamics,and material mechanics.A high-shear low-pressure grinding force model,which incorporates elastohydrodynamic liquid film thickness and abrasive grain size,was developed.The effects of the main grinding parameters(normal load,spindle rotational speed,and abrasive grain size)on the tangential grinding force were investigated through the processing of lithium niobate crystals using an intelligent precision-grinding system.The experimental results indicated that the relative error between the predicted and experimental values was 10.74%,thereby confirming the accuracy of the grinding force model.This study advances the understanding of elastohydrodynamic lubrication mechanisms in abrasive machining and provides a crucial theoretical foundation for the application of flexible ball-end BAAT.
文摘Sandwich functionally graded(FG)auxetic beams are extensively utilized in aerospace,automotive,and biomedical industries due to their excellent strength-toweight ratio,impact resistance,and tunable mechanical properties.The integration of FG materials with auxetic structures enhances their adaptability in advanced engineering applications.However,understanding their dynamic behavior under external excitations is essential for optimal design and structural reliability.Nonlinear interactions in such structures pose significant challenges in vibration analysis,necessitating robust analytical methods.This study presents a closed-form solution for the nonlinear forced vibration analysis of sandwich FG auxetic beams,offering an accurate and efficient method for predicting their dynamic response.The beam consists of two FG face sheets with material properties varying through the thickness and a re-entrant honeycomb auxetic core with an adjustable Poisson's ratio.The governing nonlinear equations of motion are derived using the first-order shear deformation theory(FSDT),the modified Gibson model,and the von Kármán relations,formulated through Hamilton's principle.A closed-form solution is obtained via the Galerkin method and multiple-scale technique.The results demonstrate that FG layers enable control of the overweight and dynamic response amplitude,with positive power law indexes reducing weight.Comparisons with finite element results confirm the accuracy of the proposed formulation.
基金supported by the Natural Science Foundation of Shaanxi Province(2023-JC-QN-0728)the China Postdoctoral Science Foundation(2021M693942)。
文摘Manned aerial vehicle-unmanned aerial vehicle(MAV-UAV)combat organization is a MAV-UAV combat collective formed from the perspective of organization design theory and methodology,and the generation of force formation plan is a key step in the organizational planning.Based on the description of the problem and the definition of organizational elements,the matching model of platform-target attack wave is constructed to minimize the redundancy of command and decision-making capability,resource capability and the number of platforms used.Based on the non-dominated sorting genetic algorithmⅢ(NSGA-Ⅲ)framework,which includes encoding/decoding method and constraint handling method,the generation model of organizational force formation plan is solved,and the effectiveness and superiority of the algorithm are verified by simulation experiments.
基金Project(2013CB036004) supported by the National Basic Research Program of ChinaProject(51178468) supported by the National Natural Science Foundation of ChinaProject(2013zzts235) supported by Innovation Fund of Central South University of China
文摘The state of roof collapse in tunnels is actually three-dimensional, so constructing a three-dimensional failure collapse mechanism is crucial so as to reflect the realistic collapsing scopes more reasonably. According to Hoek-Brown failure criterion and the upper bound theorem of limit analysis, the solution for describing the shape of roof collapse in circular or rectangular tunnels subjected to seepage forces is derived by virtue of variational calculation. The seepage forces calculated from the gradient of excess pore pressure distribution are taken as external loading in the limit analysis, and it is of great convenience to compute the pore pressure with pore pressure coefficient. Consequently, the effect of seepage forces is taken as a work rate of external force and incorporated into the upper bound limit analysis. The numerical results of collapse dimensions with different rock parameters show great validity and agreement by comparing with the results of that with two-dimensional failure mechanism.
基金National Key Research and Development Pragram of China(No.2016YFF0200602)National Natural Science Foundation of China(No.61973233)。
文摘In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision scanning platform is designed to achieve fast servo through moving probe and sample simultaneously,and several combined nanopositioning stages are used to guarantee linearity and orthogonality of displacement.To eliminate the signal deviation caused by AFM-head movement,a traceable optical lever system is designed for cantilever deformation detection.In addition,a method of tailoring the cantilever of commercial probe with flared tip is proposed to reduce the lateral force applied on the tip in measurement.The tailored probe is mounted on the 3D-AFM,and 3D imaging experiments are conducted on different samples by use of adaptive-angle scanning strategy.The results show the roob-mean-square value of the vertical displacement noise(RMS)of the prototype is less than 0.1 nm and the high/width measurement repeatability(peak-to-peak)is less than 2.5 nm.
基金Under the auspices of the Key Direction in Knowledge Innovation Programs of Chinese Academy of Sciences (No KZCX2-YW-422)National Natural Science Foundation of China (No 40701059)
文摘Urban expansion is a phenomenon of urban space increase,and an important measuring index of the process of urbanization.Taking Shanghai as an example,the changes of urban average height and built-up area were studied to represent city's vertical and horizontal increases respectively,and statistical methods were used to analyze the driving forces of urban expansion.The research drew following conclusions:1) The urban expansion process of Shanghai from 1985 to 2006 had a clear periodic feature,and could be divided into three stages:vertical expansion in dominance,coordinated vertical and horizontal expansion,and horizontal expansion in dominance.2) The average height and quantity of buildings in core city were significantly bigger than those in suburbs,but the changing speed of the latter was faster.And 3) urbanization process was the major driving force for the city's horizontal expansion,while industrial structure improvement was the key driving factor for the vertical expansion.Those two driving forces were simultaneously affected by city's political factors.
基金Projects(51278382,51479050)supported by the National Natural Science Foundation of ChinaProject(2015CB057901)supported by the National Key Basic Research Program of China+3 种基金Project(201501035-03)supported by the Public Service Sector R&D Project of Ministry of Water Resource of ChinaProject(2014B06814)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(B13024)supported by the"111"ProjectProject(YK913004)supported by the Open Foundation of Key Laboratory of Failure Mechanism and Safety Control Techniques of Earthrock Dam of the Ministry of Water Resources,China
文摘Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of the factor of safety. Parametric studies were carried out to explore the end effects of the slope failures and the effects of the pile location and diameter on the safety of the reinforced slopes. The results demonstrate that the end effects nearly have no effects on the most suitable location of the installed piles but have significant influence on the safety of the slopes. For a slope constrained to a narrow width, the slope becomes more stable owing to the contribution of the end effects. When the slope is reinforced with a row of piles in small space between piles, the effects of group piles are significant for evaluating the safety of slopes. The presented method is more appropriate for assessing the stability of slopes reinforced with piles and can be also utilized in the design of plies stabilizing the unstable slopes.
文摘Combining Dual Reciprocity Method （DRM） with Hybrid Boundary Node Method （HBNM）, the Dual Reciprocity Hybrid Boundary Node Method （DRHBNM） is developed for three-dimensional linear elasticity problems with body force. This method can be used to solve the elasticity problems with body force without domain integral, which is inevitable by HBNM. To demonstrate the versatility and the fast convergence of this method, some numerical examples of 3-D elasticity problems with body forces are examined. The computational results show that the present method is effective and can be widely applied in solving practical engineering problems.
基金supported by the Natural Science Foundation of Shandong Province(ZR2021MA019)the National Natural Science Foundation of China(11871312)。
文摘In this paper,a composite numerical scheme is proposed to solve the threedimensional Darcy-Forchheimer miscible displacement problem with positive semi-definite assumptions.A mixed finite element is used for the fow equation.The velocity and pressure are computed simultaneously.The accuracy of velocity is improved one order.The concentration equation is solved by using mixed finite element,multi-step difference and upwind approximation.A multi-step method is used to approximate time derivative for improving the accuracy.The upwind approximation and an expanded mixed finite element are adopted to solve the convection and diffusion,respectively.The composite method could compute the diffusion flux and its gradient.It possibly becomes an eficient tool for solving convection-dominated diffusion problems.Firstly,the conservation of mass holds.Secondly,the multi-step method has high accuracy.Thirdly,the upwind approximation could avoid numerical dispersion.Using numerical analysis of a priori estimates and special techniques of differential equations,we give an error estimates for a positive definite problem.Numerical experiments illustrate its computational efficiency and feasibility of application.
