BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are ne...BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.展开更多
Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems....Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems.Therefore,there is an urgent need to develop advanced tools to characterize the spatio-temporal variations of three-dimensional(3D)DO.To address this challenge,this study introduces the Light Gradient Boosting Machine(Light-GBM),combining satellite remote sensing and reanalysis data with Biogeochemical Argo data to accurately reconstruct the 3D DO structure in the Mediterranean Sea from 2010 to 2022.Various environmental parameters are incorporated as inputs,including spatiotemporal features,meteorological characteristics,and ocean color properties.The LightGBM model demonstrates excellent performance on the testing dataset with R^(2) of 0.958.The modeled DO agrees better with in-situ measurements than products from numerical models.Using the Shapley Additive exPlanations method,the contributions of input features are assessed.Sea surface temperatures provide a correlation with DO at the sea surface,while spatial coordinates supplement the view of the ocean interior.Based on the reconstructed 3D DO structure,we identify an oxygen minimum zone in the western Mediterranean that expands continuously,reaching depths of approximately 300–800 m.The western Mediterranean exhibits a significant declining trend.This study enhances marine environmental evidence by proposing a precise and cost-effective approach for reconstructing 3D DO,thereby offering insights into the dynamics of DO variations under changing climatic conditions.展开更多
BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction t...BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.展开更多
Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstructi...Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstruction model,this study proposes a quantitative microstructure characterization method combining the roughness evaluation index and the 3D fractal dimension to study the change rule of the fracture surface morphology after blasting.This method was applied and validated in the study of the fracture microstructure of the rock after blasting.The results show that the fracture morphology characteristics of the 3D contour digital reconstruction model have good correlation with the changes of the blasting action.The undulation rate of the three-dimensional surface profile of the rock is more prone to dramatic rise and dramatic fall morphology.In terms of tilting trend,the tilting direction also shows gradual disorder,with the tilting angle increasing correspondingly.All the roughness evaluation indexes of the rock fissure surface after blasting show a linear and gradually increasing trend as the distance to the bursting center increases;the difference between the two-dimensional roughness evaluation indexes and the three-dimensional ones of the same micro-area rock samples also becomes increasingly larger,among which the three-dimensional fissure roughness coefficient JRC and the surface roughness ratio Rs display better correlation.Compared with the linear fitting formula of the power function relationship,the three-dimensional fractal dimension of the postblast fissure surface is fitted with the values of JRC and Rs,which renders higher correlation coefficients,and the degree of linear fitting of JRC to the three-dimensional fractal dimension is higher.The fractal characteristics of the blast-affected region form a unity with the three-dimensional roughness evaluation of the fissure surface.展开更多
Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinom...Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinoma pathologically conformed, plan scans were done firstly. Two-phase spiral CT was performed within one breathhold each. Distension of the stomach was achieved by intravenous application of anisodamine and effervescent granules. After bolus injection of contrast medium, scanning was performed in the arterial and venous phase, and the source images were thin reconstructed. The stomach to three-dimension analysis was constructed by volume rendering （VR） multiplanaz volume reconstruction （MPVR）, shaded surface display （SSD） and CT virtual gastroscopy （CTVG） technique. In combination with the sources images, gastric tumour invasion and lymph node metastasis was assessed, and TNM staging was performed. Results： In 29 cases of gastric carcinoma, the sensitivity and specificity of two-phase multidetector-row spiral CT three-dimensional reconstruction technique in T1, T2, T3 and Ta staging, the sensitivity and specificity was 50% and 50%, 87.5% and 77.8%, 83.3% and 76.9% and 100% and 80% respectively. For the N staging, the sensitivity and specificity in No, N1, and N2 N3 was 83.3% and 71.4%, 87.5% and 77.8% and 81.8% and 75% respectively. The sensitivity and the specificity for M1 staging was 100%. Conclusion： The reconstruction technique in combination with 16-slices spiral-CT can perform TNM staging well and effectively guide the choice of the surgical procedures for gastric cancer.展开更多
In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is prop...In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is proposed. The second-order statistics based on texture features are analyzed to evaluate the scale stationarity of the training image. The multiple-point statistics of the training image are applied to obtain the multiple-point statistics stationarity estimation by the multi-point density function. The results show that the reconstructed 3D structures are closer to reality when the training image has better scale stationarity and multiple-point statistics stationarity by the indications of local percolation probability and two-point probability. Moreover, training images with higher multiple-point statistics stationarity and lower scale stationarity are likely to obtain closer results to the real 3D structure, and vice versa. Thus, stationarity analysis of the training image has far-reaching significance in choosing a better 2D thin section image for the 3D reconstruction of porous media. Especially, high-order statistics perform better than low-order statistics.展开更多
Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully construct...Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.展开更多
Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affe...Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affected, and the environment for Qiang Culture was difficult to recover. It highlighted that three-dimensional reconstruction of Qiang Culture should stress the core task and timely and effectively rescue endangered cultural heritages of Qiang Nationality from the perspectives of material and spiritual life. It had explained focuses of three-dimensional pattern construction in detail. In terms of spatial reconstruction, it should reconstruct native culture and history while material culture was constructed, and reconstruct Qiang culture highland by depending on aborigines; in terms of cluster reconstruction, it should give support to large tourism enterprises and perfect tourism chain; in terms of ecological reconstruction, it should enhance construction and demonstration of "ecological protection pilot area of Qiang culture"; in terms of development reconstruction, it should realize coordinated unity between protection and development according to classification protection, characteristic protection and key protection, so as to form the virtuous circle of post-disaster recovery protection and sustainable development.展开更多
Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively i...Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively investigating innovative models for agricultural development. Through extensive communication and collaboration, this base has established close partnerships with research institutions including Kunming University of Science and Technology, Baoshan University, and Yunnan Academy of Agricultural Sciences, with a commitment to thoroughly exploring the potential for resource recycling and ecological complementarity. An innovative four-in-one three-dimensional integrated planting system incorporating "coffee, bananas, green manure, and bees" has been implemented. Concurrently, technological and digital management strategies have been comprehensively integrated to improve planting efficiency. Under this model, the proportion of specialty coffee attains 71%, and the per-unit yield is 17% greater than that of the conventional planting model. This approach not only substantially enhances economic returns but also promotes the integrated development of ecological and social benefits, offering a valuable practical example and experiential reference for the specialty and sustainable advancement of the coffee industry in comparable regions.展开更多
Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altit...Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altitude correction during the survey process.Commonly used terrain correction methods are based on the concept of finite elementization of ground surface radioactive sources,using GPS coordinates,radar altitude,and ground elevation distribution information from aerial surveys,combined with the sourceless efficiency calibration method to construct a response matrix,which is then inverted for surface nuclide content.However,most of the sourceless efficiency calibration methods used are numerical calculations that consider the body detector as a point detector and do not consider the changes in intrinsic detection efficiency under different incident directions of gamma rays.Therefore,when the altitude of the measurement area varies significantly or the flight altitude of the aerial survey is relatively low,such sourceless efficiency calibration method calculations tend to have a large bias,which affects the accuracy of the terrain correction.To address the above problems,this study employs a novel sourceless efficiency calibration method based on the Boolean operation of the ray deposition process and simplifies the traditional body source measurement model to a surface source measurement model to achieve fast and accurate efficiency calibration.Then,through the discretization of the measurement process,the static measurement process is superposed as equivalent to the dynamic measurement process,and the dynamic measurement response matrix is built and optimized based on the calibration method.Finally,the PSO-MLEM algorithm was used to solve the dynamic measurement response matrix to achieve dynamic terrain correction of aerial survey data.Analysis of the Baiyun'ebo test area revealed that,after applying dynamic terrain correction,the inverted anomalies in uranium(eU),thorium(eTh),and potassium(K)concentrations were closer to ground measurements(within 5.72%-30.79%)and exhibited clearer anomaly boundaries compared to traditional height-based corrections.However,owing to the inherent statistical fluctuations and characteristics of matrix inversion,higher measurement values tend to absorb lower ones,potentially enlarging the anomalous regions.Nevertheless,the highanomaly regions after inversion largely coincided with the ground truth validation,demonstrating that the proposed method can effectively correct airborne gamma spectrometry data.展开更多
Fluorinated motifs are prevalent in both pharmaceuticals and agrochemicals.The incorporation of fluorine-containing moieties to drug candidates has emerged as a potent strategy for lead optimization in pharmaceutical ...Fluorinated motifs are prevalent in both pharmaceuticals and agrochemicals.The incorporation of fluorine-containing moieties to drug candidates has emerged as a potent strategy for lead optimization in pharmaceutical research and development.While extensive research has been devoted to constructing molecules that incorporate a trifluoromethylthio(SCF_(3)−)group on a stereogenic carbon,the synthesis of trifluoromethylthiolated alkanes featuring a SCF_(3)-substituted stereogenic carbon at non-activated site remains understudied.Herein,we report a Cu-catalyzed regio-and enantioselective hydroallylation of 1-trifluoromethylthiolated alkenes.Important to the process is the regio-and enantioselective Cu-H insertion to SCF_(3)-substituted alkene to form chiralα-SCF_(3) alkyl copper intermediates,outcompeting unproductive insertion to the coupling partner,and eventually proceed to afford optically active homoallylic trifluoromethylthiolated products.展开更多
The historical image of Ouyang Xiu constructed during the Song Dynasty evolved from a multifaceted portrayal that balanced his political and literary achievements into a singular cultural symbol.In the Northern Song D...The historical image of Ouyang Xiu constructed during the Song Dynasty evolved from a multifaceted portrayal that balanced his political and literary achievements into a singular cultural symbol.In the Northern Song Dynasty,writings by Ouyang Xiu's family and epitaphs by his colleagues crafted a balanced narrative emphasizing both his official duties and literary merits,thus constructing a dual image of him as a principled remonstrator and a literary master.In the Southern Song Dynasty,official historiography gradually eroded his complex persona as a political reformer by selectively trimming political disputes and emphasizing his literary lineage,ultimately establishing him as a cultural exemplar beyond factional strife.Throughout this evolution of historical writing,Ouyang Xiu's sharpness as a remonstrator was gradually obscured in historical texts,while his image as a literary master,revered by all,became firmly established.The reshaping of Ouyang Xiu's image in historical writings across the Northern and Southern Song dynasties not only reflects the logic of selecting scholar-official role models under the influence of official ideology but also reveals the inherent pattern whereby individual distinctiveness fades into symbolic construction in historical writing.展开更多
Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching t...Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching the construction of an emergency care system based on the concept of“linkage”,delving into its theoretical foundations,exploring innovative construction models,and analyzing practical cases.The study indicates that an emergency care system under the“linkage”concept can effectively integrate resources and enhance efficiency,providing new insights for improving the construction of the emergency care system.It aims to promote the development of the emergency care system towards a more scientific,efficient,and collaborative direction.展开更多
Electrochemical liquid lithium extraction technology has attracted much attention because of its high selectivity,good efficiency,and eco-friendliness.However,the low energy density per unit area and poor stability of...Electrochemical liquid lithium extraction technology has attracted much attention because of its high selectivity,good efficiency,and eco-friendliness.However,the low energy density per unit area and poor stability of traditional thin film electrodes(F-LMO),as well as manganese dissolution loss induced by the Jahn-Teller distortion of LiMn_(2)O_(4),hinder their industrial scalability.Herein,a durable and high-efficiency multistage porous LiMn_(2)O_(4) thick electrode was prepared sustainably by 3D printing technology(3DPLMO)for enhancing lithium recovery from salt lake brine.The multistage porous structure reduced the mass transfer resistance and shortened the ion diffusion path,which was conducive to accelerating the diffusion rate of Li+.Simultaneously,the three-dimensional conductive networks composed of reduced graphene oxide(r GO)and carbon nanotubes(CNT)synergized with the multistage pores effectively weakened the polarization phenomenon of the electrode and improved the stability of 3DP-LMO.The3DP-LMO exhibited a 5.5-fold higher extraction capacity per unit area and the Mn dissolution loss rate was only 1/15 compared with the F-LMO.Notably,the capacity retention rate of 3DP-LMO was 87.6%,significantly better than that of F-LMO(66.3%).Based on the quasi-in situ X-ray Diffraction results,the mechanism of lithium intercalation and deintercalation in 3DP-LMO was elucidated.Furthermore,lithium extraction parameters were optimized using response surface method-center composite design(RSM-CCD),resulting in an increase in lithium extraction capacity to 15.66 mg g^(-1)and a reduction in energy consumption to only 12.33 Wh mol^(-1).The results show that 3DP-LMO has significantly improved lithium extraction performance and stability,and has considerable prospects in practical application.展开更多
The built environment and construction industry are another significant source of carbon emissions to the environment in the world,through the production of materials,construction activities,and the energy consumed du...The built environment and construction industry are another significant source of carbon emissions to the environment in the world,through the production of materials,construction activities,and the energy consumed during the lifecycle of an asset.These emissions are difficult to manage effectively because the data are not consolidated,the operating conditions are dynamic,and the traditional assessment tools are not able to support continuous and data-driven decisions.The new technologies,especially Digital Twins(DT)and artificial intelligence(AI),have some potential solutions,which will combine the lifecycle data and provide a predictive,adaptive carbon management in the building and urban systems.The given paper is a systematic review of the integration of DT and AI(DT–AI)into carbon management in operational construction and urban planning.Structured database searches and filters on the basis of DT-facilitated carbon monitoring,prediction,optimization,and operational control were used to identify peer-reviewed studies that were published within the last few years and filtered through to gather them.Three main functions of DT–AI systems are outlined in the review:predicting carbon emissions on the basis of data-driven models,optimizing low-carbon design and planning with multi-objective approaches,and providing intelligent control of the energy systems.Some of the major issues are data interoperability,model validation,and a lack of evidence of large-scale deployment.This study combines integrated DT–AI models and their contribution to lifecycle carbon management,unlike the previous reviews of either DT or AI alone.The paper ends with a conclusion and recommendations to create scalable,validated DT–AI solutions to accomplish carbon-neutral built environments.展开更多
Oil-fired construction machinery(OCM)is a major source of urban air pollutants and CO_(2) emissions,and elec-trification is a crucial pathway for improving air quality and achieving China’s dual carbon goals;however,...Oil-fired construction machinery(OCM)is a major source of urban air pollutants and CO_(2) emissions,and elec-trification is a crucial pathway for improving air quality and achieving China’s dual carbon goals;however,its feasibility has not been fully explored.This study uses data envelopment analysis and the analytic hierarchy process to establish a development potential index,covering technical efficiency,economic cost,application sce-narios,and charging time and range,with an empirical analysis conducted in Beijing.The findings indicated the high feasibility of replacing OCM with electric alternatives,especially within the low-power range.Based on 2023 registered coding dat1,it is projected that by 2030,electrification could reduce regional average con-centrations of CO,NO_(x),PM_(2.5) and VOCs by 12.2%to 56.4%and reduce CO_(2) by 11.7%to 56.9%.Owing to economic considerations,small-and medium-sized machinery are particularly feasible for electrification.Key recommendations include prioritizing the electrification of forklifts,lifting platforms,and small-sized machinery in high-emission areas,particularly in central urban districts.Policies such as carbon taxes,carbon markets,and performance grading systems are suggested to incentivize electrification,along with expanding high-emission restriction zones and improving energy infrastructure to support widespread electrification.展开更多
In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specia...In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.展开更多
[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of ...[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.展开更多
This study investigated the impact of the xu-argument-based continuation on Chinese high school students’English syntactic complexity captured using verb-argument constructions(VACs)over an 8-week period.Participants...This study investigated the impact of the xu-argument-based continuation on Chinese high school students’English syntactic complexity captured using verb-argument constructions(VACs)over an 8-week period.Participants were two comparable groups of students:one group worked with English input texts(i.e.,E-E),while the other worked with Chinese input texts with the same content(i.e.,C-E).The results showed that over time,the E-E group exhibited a greater tendency to use a wider range of VACs,such as caused-motion constructions,attributives,passives,and phrasal verbs.At the same time,they reduced their use of simpler VACs like intransitive-motion and simple transitive constructions,especially when compared to the C-E group.This pattern was also evident in the topic-based writing during the posttest.These findings strongly support the effectiveness of xu-argument-based continuation tasks in promoting the development of L2 VAC knowledge.They suggest that tasks combining language input with output can significantly enhance learners’ability to use more sophisticated VACs.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
基金Supported by the 2022 Provincial Quality Engineering Project for Higher Education Institutions,No.2022sx031the 2023 Provincial Quality Engineering Project for Higher Education Institutions,No.2023jyxm1071.
文摘BACKGROUND Inguinal hernias are common after surgery.Tension-free repair is widely accepted as the main method for managing inguinal hernias.Adequate exposure,coverage,and repair of the myopectineal orifice(MPO)are necessary.However,due to differences in race and sex,people’s body shapes vary.According to European guidelines,the patch should measure 10 cm×15 cm.If any part of the MPO is dissected,injury to the nerves,vascular network,or organs may occur during surgery,thereby leading to inguinal discomfort,pain,and seroma formation after surgery.Therefore,accurate localization and measurement of the boundary of the MPO are crucial for selecting the optimal patch for inguinal hernia repair.AIM To compare the size of the MPO measured on three-dimensional multislice spiral computed tomography(CT)with that measured via laparoscopy and explore the relevant factors influencing the size of the MPO.METHODS Clinical data from 74 patients who underwent laparoscopic tension-free inguinal hernia repair at the General Surgery Department of the First Affiliated Hospital of Anhui University of Science and Technology between September 2022 and July 2024 were collected and analyzed retrospectively.Transabdominal preperitoneal was performed.Sixty-four males and 10 females,with an average age of 58.30±12.32 years,were included.The clinical data of the patients were collected.The boundary of the MPO was measured on three-dimensional CT images before surgery and then again during transabdominal preperitoneal.All the preoperative and intraoperative data were analyzed via paired t-tests.A t-test was used for comparisons of age,body mass index,and sex between the groups.In the comparative analysis,a P value less than 0.05 indicated a significant difference.RESULTS The boundaries of the MPO on 3-dimensional CT images measured 7.05±0.47 cm and 6.27±0.61 cm,and the area of the MPO was 19.54±3.33 cm^(2).The boundaries of the MPO during surgery were 7.18±0.51 cm and 6.17±0.40 cm.The errors were not statistically significant.However,the intraoperative BD(the width of the MPO,P=0.024,P<0.05)and preoperative AC(the length of the MPO,P=0.045,P<0.05)significantly differed according to sex.The AC and BD measurements before and during surgery were not significantly different according to age,body mass index,hernia side or hernia type(P>0.05).CONCLUSION The application of this technology can aid in determining the most appropriate dissection range and patch size.
基金supported by the Central Guiding Local Science and Technology Development Fund of Shandong-Yellow River Basin(No.YDZX2023019)Shandong Natural Science Foundation of China(Nos.ZR2020QF067 and ZR2023QD073)+6 种基金the Discipline Cluster Research Project of Qingdao University“Deep mining and intelligent prediction of multimodal big data for marine ecological disasters”(No.20240604)sourced from the International Argo Program and the national programs that contribute to it(https://argo.ucsd.edu)the CMEMS(http://marine.copernicus.eu/)the CDS(https://cds.climate.copernicus.eu/)the EMODnet(https://www.emodnet-chemistry.eu/)obtained from the ERA5(https://www.ecmwf.int)derived from the Glob Colour Project(http://globcolour.info).
文摘Oceanic dissolved oxygen(DO)concentration is crucial for assessing the status of marine ecosystems.Against the backdrop of global warming,DO shows a general decrease,posing a threat to the health of marine ecosystems.Therefore,there is an urgent need to develop advanced tools to characterize the spatio-temporal variations of three-dimensional(3D)DO.To address this challenge,this study introduces the Light Gradient Boosting Machine(Light-GBM),combining satellite remote sensing and reanalysis data with Biogeochemical Argo data to accurately reconstruct the 3D DO structure in the Mediterranean Sea from 2010 to 2022.Various environmental parameters are incorporated as inputs,including spatiotemporal features,meteorological characteristics,and ocean color properties.The LightGBM model demonstrates excellent performance on the testing dataset with R^(2) of 0.958.The modeled DO agrees better with in-situ measurements than products from numerical models.Using the Shapley Additive exPlanations method,the contributions of input features are assessed.Sea surface temperatures provide a correlation with DO at the sea surface,while spatial coordinates supplement the view of the ocean interior.Based on the reconstructed 3D DO structure,we identify an oxygen minimum zone in the western Mediterranean that expands continuously,reaching depths of approximately 300–800 m.The western Mediterranean exhibits a significant declining trend.This study enhances marine environmental evidence by proposing a precise and cost-effective approach for reconstructing 3D DO,thereby offering insights into the dynamics of DO variations under changing climatic conditions.
基金Supported by the Natural Science Foundation of Fujian Province,No.2022J011442.
文摘BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.
基金National Key Research and Development Program of China,Grant/Award Number:2021YFC2902103National Natural Science Foundation of China,Grant/Award Number:51934001Fundamental Research Funds for the Central Universities,Grant/Award Number:2023JCCXLJ02。
文摘Fracture surface contour study is one of the important requirements for characterization and evaluation of the microstructure of rocks.Based on the improved cube covering method and the 3D contour digital reconstruction model,this study proposes a quantitative microstructure characterization method combining the roughness evaluation index and the 3D fractal dimension to study the change rule of the fracture surface morphology after blasting.This method was applied and validated in the study of the fracture microstructure of the rock after blasting.The results show that the fracture morphology characteristics of the 3D contour digital reconstruction model have good correlation with the changes of the blasting action.The undulation rate of the three-dimensional surface profile of the rock is more prone to dramatic rise and dramatic fall morphology.In terms of tilting trend,the tilting direction also shows gradual disorder,with the tilting angle increasing correspondingly.All the roughness evaluation indexes of the rock fissure surface after blasting show a linear and gradually increasing trend as the distance to the bursting center increases;the difference between the two-dimensional roughness evaluation indexes and the three-dimensional ones of the same micro-area rock samples also becomes increasingly larger,among which the three-dimensional fissure roughness coefficient JRC and the surface roughness ratio Rs display better correlation.Compared with the linear fitting formula of the power function relationship,the three-dimensional fractal dimension of the postblast fissure surface is fitted with the values of JRC and Rs,which renders higher correlation coefficients,and the degree of linear fitting of JRC to the three-dimensional fractal dimension is higher.The fractal characteristics of the blast-affected region form a unity with the three-dimensional roughness evaluation of the fissure surface.
基金This project was supported by a grant from the Natural Science Foundation of Hubei Province (No. 2002AB130)
文摘Abstract Objective： To evaluate the diagnostic value of two-phase multidetector-row spiral CT threedimensional reconstruction technique in TNM staging of gastric cancer. Methods： In 29 patients with gastric carcinoma pathologically conformed, plan scans were done firstly. Two-phase spiral CT was performed within one breathhold each. Distension of the stomach was achieved by intravenous application of anisodamine and effervescent granules. After bolus injection of contrast medium, scanning was performed in the arterial and venous phase, and the source images were thin reconstructed. The stomach to three-dimension analysis was constructed by volume rendering （VR） multiplanaz volume reconstruction （MPVR）, shaded surface display （SSD） and CT virtual gastroscopy （CTVG） technique. In combination with the sources images, gastric tumour invasion and lymph node metastasis was assessed, and TNM staging was performed. Results： In 29 cases of gastric carcinoma, the sensitivity and specificity of two-phase multidetector-row spiral CT three-dimensional reconstruction technique in T1, T2, T3 and Ta staging, the sensitivity and specificity was 50% and 50%, 87.5% and 77.8%, 83.3% and 76.9% and 100% and 80% respectively. For the N staging, the sensitivity and specificity in No, N1, and N2 N3 was 83.3% and 71.4%, 87.5% and 77.8% and 81.8% and 75% respectively. The sensitivity and the specificity for M1 staging was 100%. Conclusion： The reconstruction technique in combination with 16-slices spiral-CT can perform TNM staging well and effectively guide the choice of the surgical procedures for gastric cancer.
基金The National Natural Science Foundation of China(No.60972130)
文摘In order to obtain a better sandstone three-dimensional （3D） reconstruction result which is more similar to the original sample, an algorithm based on stationarity for a two-dimensional （2D） training image is proposed. The second-order statistics based on texture features are analyzed to evaluate the scale stationarity of the training image. The multiple-point statistics of the training image are applied to obtain the multiple-point statistics stationarity estimation by the multi-point density function. The results show that the reconstructed 3D structures are closer to reality when the training image has better scale stationarity and multiple-point statistics stationarity by the indications of local percolation probability and two-point probability. Moreover, training images with higher multiple-point statistics stationarity and lower scale stationarity are likely to obtain closer results to the real 3D structure, and vice versa. Thus, stationarity analysis of the training image has far-reaching significance in choosing a better 2D thin section image for the 3D reconstruction of porous media. Especially, high-order statistics perform better than low-order statistics.
文摘Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.
文摘Through the introduction of disaster situation of Qiang Culture after Wenchuan Earthquake, the paper emphasized that carriers of Qiang Culture had been seriously damaged, the inheritance of Qiang Culture had been affected, and the environment for Qiang Culture was difficult to recover. It highlighted that three-dimensional reconstruction of Qiang Culture should stress the core task and timely and effectively rescue endangered cultural heritages of Qiang Nationality from the perspectives of material and spiritual life. It had explained focuses of three-dimensional pattern construction in detail. In terms of spatial reconstruction, it should reconstruct native culture and history while material culture was constructed, and reconstruct Qiang culture highland by depending on aborigines; in terms of cluster reconstruction, it should give support to large tourism enterprises and perfect tourism chain; in terms of ecological reconstruction, it should enhance construction and demonstration of "ecological protection pilot area of Qiang culture"; in terms of development reconstruction, it should realize coordinated unity between protection and development according to classification protection, characteristic protection and key protection, so as to form the virtuous circle of post-disaster recovery protection and sustainable development.
文摘Under the strategic framework of rural revitalization and agricultural modernization, Xinjiashan Specialty Coffee Base, located in Zaotang Village, Lujiang Town, Longyang District, Baoshan City, has been proactively investigating innovative models for agricultural development. Through extensive communication and collaboration, this base has established close partnerships with research institutions including Kunming University of Science and Technology, Baoshan University, and Yunnan Academy of Agricultural Sciences, with a commitment to thoroughly exploring the potential for resource recycling and ecological complementarity. An innovative four-in-one three-dimensional integrated planting system incorporating "coffee, bananas, green manure, and bees" has been implemented. Concurrently, technological and digital management strategies have been comprehensively integrated to improve planting efficiency. Under this model, the proportion of specialty coffee attains 71%, and the per-unit yield is 17% greater than that of the conventional planting model. This approach not only substantially enhances economic returns but also promotes the integrated development of ecological and social benefits, offering a valuable practical example and experiential reference for the specialty and sustainable advancement of the coffee industry in comparable regions.
基金supported by the National Key Research and Development Program(No.2022YFC2807400)the National Natural Science Foundation of China(Nos.12265003 and 12205044)。
文摘Aerial surveys are dynamic and continuous processes,and there are different height distributions of the ground in the measurement area,which leads to problems such as overlapping measurement areas and inaccurate altitude correction during the survey process.Commonly used terrain correction methods are based on the concept of finite elementization of ground surface radioactive sources,using GPS coordinates,radar altitude,and ground elevation distribution information from aerial surveys,combined with the sourceless efficiency calibration method to construct a response matrix,which is then inverted for surface nuclide content.However,most of the sourceless efficiency calibration methods used are numerical calculations that consider the body detector as a point detector and do not consider the changes in intrinsic detection efficiency under different incident directions of gamma rays.Therefore,when the altitude of the measurement area varies significantly or the flight altitude of the aerial survey is relatively low,such sourceless efficiency calibration method calculations tend to have a large bias,which affects the accuracy of the terrain correction.To address the above problems,this study employs a novel sourceless efficiency calibration method based on the Boolean operation of the ray deposition process and simplifies the traditional body source measurement model to a surface source measurement model to achieve fast and accurate efficiency calibration.Then,through the discretization of the measurement process,the static measurement process is superposed as equivalent to the dynamic measurement process,and the dynamic measurement response matrix is built and optimized based on the calibration method.Finally,the PSO-MLEM algorithm was used to solve the dynamic measurement response matrix to achieve dynamic terrain correction of aerial survey data.Analysis of the Baiyun'ebo test area revealed that,after applying dynamic terrain correction,the inverted anomalies in uranium(eU),thorium(eTh),and potassium(K)concentrations were closer to ground measurements(within 5.72%-30.79%)and exhibited clearer anomaly boundaries compared to traditional height-based corrections.However,owing to the inherent statistical fluctuations and characteristics of matrix inversion,higher measurement values tend to absorb lower ones,potentially enlarging the anomalous regions.Nevertheless,the highanomaly regions after inversion largely coincided with the ground truth validation,demonstrating that the proposed method can effectively correct airborne gamma spectrometry data.
基金the National Key R&D Program of China(No.2021YFF0701700)the National Natural Science Foundation of China(Nos.22271264 and 21971228)for financial support.
文摘Fluorinated motifs are prevalent in both pharmaceuticals and agrochemicals.The incorporation of fluorine-containing moieties to drug candidates has emerged as a potent strategy for lead optimization in pharmaceutical research and development.While extensive research has been devoted to constructing molecules that incorporate a trifluoromethylthio(SCF_(3)−)group on a stereogenic carbon,the synthesis of trifluoromethylthiolated alkanes featuring a SCF_(3)-substituted stereogenic carbon at non-activated site remains understudied.Herein,we report a Cu-catalyzed regio-and enantioselective hydroallylation of 1-trifluoromethylthiolated alkenes.Important to the process is the regio-and enantioselective Cu-H insertion to SCF_(3)-substituted alkene to form chiralα-SCF_(3) alkyl copper intermediates,outcompeting unproductive insertion to the coupling partner,and eventually proceed to afford optically active homoallylic trifluoromethylthiolated products.
基金an initial outcome of the Research on the Interactive Relationship Between Biographies and Epitaphs in Ancient China,a project(ID:24BZW023)supported by the National Social Science Fund of China。
文摘The historical image of Ouyang Xiu constructed during the Song Dynasty evolved from a multifaceted portrayal that balanced his political and literary achievements into a singular cultural symbol.In the Northern Song Dynasty,writings by Ouyang Xiu's family and epitaphs by his colleagues crafted a balanced narrative emphasizing both his official duties and literary merits,thus constructing a dual image of him as a principled remonstrator and a literary master.In the Southern Song Dynasty,official historiography gradually eroded his complex persona as a political reformer by selectively trimming political disputes and emphasizing his literary lineage,ultimately establishing him as a cultural exemplar beyond factional strife.Throughout this evolution of historical writing,Ouyang Xiu's sharpness as a remonstrator was gradually obscured in historical texts,while his image as a literary master,revered by all,became firmly established.The reshaping of Ouyang Xiu's image in historical writings across the Northern and Southern Song dynasties not only reflects the logic of selecting scholar-official role models under the influence of official ideology but also reveals the inherent pattern whereby individual distinctiveness fades into symbolic construction in historical writing.
文摘Against the backdrop of continuous social development and growing public health demands,the efficiency and scientific nature of the emergency care system are of paramount importance.This paper focuses on researching the construction of an emergency care system based on the concept of“linkage”,delving into its theoretical foundations,exploring innovative construction models,and analyzing practical cases.The study indicates that an emergency care system under the“linkage”concept can effectively integrate resources and enhance efficiency,providing new insights for improving the construction of the emergency care system.It aims to promote the development of the emergency care system towards a more scientific,efficient,and collaborative direction.
基金supported by the National Key R&D Program of China(No.2022YFE0208300)the National Natural Science Foundation of China(No.22278426)+2 种基金the China National Funds for Distinguished Young Scientists(No.22425808)the China Postdoctoral Science Foundation(No.2025M771155)the Science Foundation of China University of Petroleum,Beijing(Nos.2462024XKBH001,2462022YJRC003,2462022YJRC002,2462025BJRC002)。
文摘Electrochemical liquid lithium extraction technology has attracted much attention because of its high selectivity,good efficiency,and eco-friendliness.However,the low energy density per unit area and poor stability of traditional thin film electrodes(F-LMO),as well as manganese dissolution loss induced by the Jahn-Teller distortion of LiMn_(2)O_(4),hinder their industrial scalability.Herein,a durable and high-efficiency multistage porous LiMn_(2)O_(4) thick electrode was prepared sustainably by 3D printing technology(3DPLMO)for enhancing lithium recovery from salt lake brine.The multistage porous structure reduced the mass transfer resistance and shortened the ion diffusion path,which was conducive to accelerating the diffusion rate of Li+.Simultaneously,the three-dimensional conductive networks composed of reduced graphene oxide(r GO)and carbon nanotubes(CNT)synergized with the multistage pores effectively weakened the polarization phenomenon of the electrode and improved the stability of 3DP-LMO.The3DP-LMO exhibited a 5.5-fold higher extraction capacity per unit area and the Mn dissolution loss rate was only 1/15 compared with the F-LMO.Notably,the capacity retention rate of 3DP-LMO was 87.6%,significantly better than that of F-LMO(66.3%).Based on the quasi-in situ X-ray Diffraction results,the mechanism of lithium intercalation and deintercalation in 3DP-LMO was elucidated.Furthermore,lithium extraction parameters were optimized using response surface method-center composite design(RSM-CCD),resulting in an increase in lithium extraction capacity to 15.66 mg g^(-1)and a reduction in energy consumption to only 12.33 Wh mol^(-1).The results show that 3DP-LMO has significantly improved lithium extraction performance and stability,and has considerable prospects in practical application.
文摘The built environment and construction industry are another significant source of carbon emissions to the environment in the world,through the production of materials,construction activities,and the energy consumed during the lifecycle of an asset.These emissions are difficult to manage effectively because the data are not consolidated,the operating conditions are dynamic,and the traditional assessment tools are not able to support continuous and data-driven decisions.The new technologies,especially Digital Twins(DT)and artificial intelligence(AI),have some potential solutions,which will combine the lifecycle data and provide a predictive,adaptive carbon management in the building and urban systems.The given paper is a systematic review of the integration of DT and AI(DT–AI)into carbon management in operational construction and urban planning.Structured database searches and filters on the basis of DT-facilitated carbon monitoring,prediction,optimization,and operational control were used to identify peer-reviewed studies that were published within the last few years and filtered through to gather them.Three main functions of DT–AI systems are outlined in the review:predicting carbon emissions on the basis of data-driven models,optimizing low-carbon design and planning with multi-objective approaches,and providing intelligent control of the energy systems.Some of the major issues are data interoperability,model validation,and a lack of evidence of large-scale deployment.This study combines integrated DT–AI models and their contribution to lifecycle carbon management,unlike the previous reviews of either DT or AI alone.The paper ends with a conclusion and recommendations to create scalable,validated DT–AI solutions to accomplish carbon-neutral built environments.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1200200).
文摘Oil-fired construction machinery(OCM)is a major source of urban air pollutants and CO_(2) emissions,and elec-trification is a crucial pathway for improving air quality and achieving China’s dual carbon goals;however,its feasibility has not been fully explored.This study uses data envelopment analysis and the analytic hierarchy process to establish a development potential index,covering technical efficiency,economic cost,application sce-narios,and charging time and range,with an empirical analysis conducted in Beijing.The findings indicated the high feasibility of replacing OCM with electric alternatives,especially within the low-power range.Based on 2023 registered coding dat1,it is projected that by 2030,electrification could reduce regional average con-centrations of CO,NO_(x),PM_(2.5) and VOCs by 12.2%to 56.4%and reduce CO_(2) by 11.7%to 56.9%.Owing to economic considerations,small-and medium-sized machinery are particularly feasible for electrification.Key recommendations include prioritizing the electrification of forklifts,lifting platforms,and small-sized machinery in high-emission areas,particularly in central urban districts.Policies such as carbon taxes,carbon markets,and performance grading systems are suggested to incentivize electrification,along with expanding high-emission restriction zones and improving energy infrastructure to support widespread electrification.
文摘In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.
文摘[Significance]In alignment with the national germplasm security strategy,current research efforts are accelerating the adoption of precision breeding in sheep.Within the whole-genome selection,accurate phenotyping of body morphometrics is critical for assessing growth performance and breeding value.Traditional manual measurements are inefficient,prone to human error,and may cause stress to sheep,limiting their suitability for precision sheep management.By summarizing the applications of sheep body size measurement technologies and analyzing their development directions,this paper provides theoretical references and practical guidance for the research and application of non contact sheep body size measurement.[Progress]This review synthesizes progress across three principal methodological paradigms:two-dimensional(2D)image-based techniques,three-dimensional(3D)point cloud-based approaches,and integrated 2D-3D fusion systems.2D methods,employing either handcrafted geometric features or deep learning-based keypoint detector algorithms,are cost-effective and operationally simple but sensitive to variation in imaging conditions and unable to capture critical circumference metrics.3D point-cloud approaches enable precise reconstruction of full animal morphology,supporting comprehensive body-size acquisition with higher accuracy,yet face challenges including high hardware costs,complex data workflows,and sensitivity to posture variability.Hybrid 2D-3D fusion systems combine semantic richness from RGB imagery with geometric completeness from point clouds.Having been effectively validated in other livestock specise,e.g.,cattle and pigs,these fusion systems have demonstrated excellent performance,providing important technical references and practical insights for sheep body size measurement.[Conclusions and Prospects]Firstly,future research should focus on constructing large-scale,high-quality datasets for sheep body size measurement that encompass diverse breeds,growth stages,and environmental conditions,thereby enhancing model robustness and generalization.Secondly,the development of lightweight artificial intelligence models is essential.Techniques such as model compression,quantization,and algorithmic optimization can substantially reduce computational complexity and storage requirements,facilitating deployment in resource-constrained environments.Thirdly,the 3D point cloud processing pipeline should be streamlined to improve the efficiency of data acquisition,filtering,registration,and segmentation,while promoting the integration of low-cost,high-resilience vision systems into practical farming scenarios.Fourthly,specific emphasis should be placed on improving the accuracy of curved-dimensional measurements,such as chest circumference,abdominal circumference,and shank circumference,through advances in pose standardization,refined 3D segmentation strategies,and multimodal data fusion.Finally,the cross-fertilization of sheep body size measurement technologies with analogous methods for other livestock species offers a promising pathway for mutual learning and collaborative innovation,accelerating the industrialization of automated sheep morphometric systems and supporting the development of intelligent,data-driven pasture management practices.
文摘This study investigated the impact of the xu-argument-based continuation on Chinese high school students’English syntactic complexity captured using verb-argument constructions(VACs)over an 8-week period.Participants were two comparable groups of students:one group worked with English input texts(i.e.,E-E),while the other worked with Chinese input texts with the same content(i.e.,C-E).The results showed that over time,the E-E group exhibited a greater tendency to use a wider range of VACs,such as caused-motion constructions,attributives,passives,and phrasal verbs.At the same time,they reduced their use of simpler VACs like intransitive-motion and simple transitive constructions,especially when compared to the C-E group.This pattern was also evident in the topic-based writing during the posttest.These findings strongly support the effectiveness of xu-argument-based continuation tasks in promoting the development of L2 VAC knowledge.They suggest that tasks combining language input with output can significantly enhance learners’ability to use more sophisticated VACs.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
