Mesoscale eddies play vital roles in ocean processes.Although previous studies focused on eddy surface features and individual three-dimensional(3D)eddy cases in the northwestern Pacific Ocean,the analysis of unique e...Mesoscale eddies play vital roles in ocean processes.Although previous studies focused on eddy surface features and individual three-dimensional(3D)eddy cases in the northwestern Pacific Ocean,the analysis of unique eddy3D regional characteristics is still lacking.A 3D eddy detection scheme is applied to 9 years(2000-2008)of eddyresolving Regional Ocean Modeling System(ROMS)output to obtain a 3D eddy dataset from the surface to a depth of 1000 m in the northwestern Pacific Ocean(15°-35°N,120°-145°E).The 3D characteristics of mesoscale eddies are analyzed in two regions,namely,Box1(Subtropical Countercurrent,15°-25°N,120°-145°E)and Box2(Southern Kuroshio Extension,25°-35°N,120°-145°E).In Box1,the current is characterized by strong vertical shear and weak horizontal shear.In Box2,the current is characterized by the strong Kuroshio,topographic effect,and the westward propagation of Rossby waves.The results indicate the importance of baroclinic instability in Box1,whereas in Box2,both the barotropic and baroclinic instability are important.Moreover,the mesoscale eddies’properties in Box1 and Box2 are distinct.The eddies in Box1 have larger number and radius but a shorter lifetime.By contrast,Box2 has fewer eddies,which have smaller radius but longer lifetime.Vertically,more eddies are detected at the subsurface than at the surface in both regions;the depth of 650 m is the turning point in Box1.Above this depth,the number of cyclonic eddies(CEs)is larger than that of anticyclonic eddies(AEs).In Box2,the number of CEs is dominant vertically.Eddy kinetic energy(EKE)and mean normalized relative vorticity in Box2are significantly higher than those in Box1.With increasing depth,the attenuation trend of EKE and relative vorticity of Box1 become greater than those of Box2.Furthermore,the upper ocean(about 300 m in depth)contains 68.6%of the eddies(instantaneous eddy).Only 16.6%of the eddies extend to 1000 m.In addition,about87%of the eddies are bowl-shaped eddies in the two regions.Only about 3%are cone-shaped eddies.With increasing depth of the eddies,the proportion of bowl-shaped eddies gradually decreases.Conversely,the coneand lens-shaped eddies are equal in number at 700-1000 m,accounting for about 30%each.Studying the 3D characteristics of eddies in two different regions of the northwestern Pacific Ocean is an important stepping stone for discussing the different eddy generation mechanisms.展开更多
Particulate-reinforced metal matrix composites(PRMMCs)are difficult to machine due to the inclusion of hard,brittle reinforcing particles.Existing experimental investigations rarely reveal the complex material removal...Particulate-reinforced metal matrix composites(PRMMCs)are difficult to machine due to the inclusion of hard,brittle reinforcing particles.Existing experimental investigations rarely reveal the complex material removal mechanisms(MRMs)involved in the machining of PRMMCs.This paper develops a three-dimensional(3D)microstructure-based model for investigating the MRM and surface integrity of machined PRMMCs.To accurately mimic the actual microstructure of a PRMMC,polyhedrons were randomly distributed inside the matrix to represent irregular SiC particles.Particle fracture and matrix deformation and failure were taken into account.For the model’s capability comparison,a two-dimensional(2D)analysis was also conducted.Relevant cutting experiments showed that the established 3D model accurately predicted the material removal,chip morphology,machined surface finish,and cutting forces.It was found that the matrix-particle-tool interactions led to particle fractures,mainly in the primary shear and secondary deformation zones along the cutting path and beneath the machined surface.Particle fracture and dilodegment greatly influences the quality of a machined surface.It was also found that although a 2D model can reflect certain material removal features,its ability to predict microstructural variation is limited.展开更多
Owing to the complexity of droughts,detailed assessments of drought events have become a key issue in water resource management and planning.In this study,three-dimensional copula models at Standard Precipitation Evap...Owing to the complexity of droughts,detailed assessments of drought events have become a key issue in water resource management and planning.In this study,three-dimensional copula models at Standard Precipitation Evapotranspiration Index(SPEI)-1,SPEI-3,SPEI-6,and SPEI-12 were used to assess drought risks in the Haihe River Basin(HRB)of China from 1961–2020.Drought duration,severity,and peak,as indicated by SPEI,were extracted based on run theory and fitted with suitable marginal distributions.The difference between the joint return period(Tor)and the co-occurrence return period(Tand)could explain the intrinsic correlation between drought characteristics.The smaller the difference,the stronger the correlation.The results showed that droughts in the north-western region of the HRB were characterized by high peak,intense severity,and long duration.In contrast,the eastern region exhibited a higher frequency of drought occurrence.Furthermore,the decreasing trend in precipitation dominated droughts,and topography of the northwest region creates the features of low annual precipitation with more days of precipitation.The drought events in the HRB were influenced by the phase shift between El Niño and La Niña.There was a strong negative phase coupling between SPEI-12 and Niño3.4(R^(2)≥0.77).The transition from La Niña to El Niño was responsible for severe droughts in the HRB.The El Niño-Southern Oscillation could predict droughts with lag times of 0.15–4.35 mon in mountainous areas.展开更多
Shield tunneling inevitably passes through a large number of pile foundations in urban areas.Thus,an accurate assessment of tunneling-induced pile displacement and potential damage becomes a critical part of shield co...Shield tunneling inevitably passes through a large number of pile foundations in urban areas.Thus,an accurate assessment of tunneling-induced pile displacement and potential damage becomes a critical part of shield construction.This study presents a mechanism research of pile-soil-tunnel interaction through Pasternak-based two-stage analysis method.In the first stage,based on Mindlin’s solution,the soil displacement fields induced by shield thrust force,cutterhead frictions,shield shell frictions and grouting pressure are derived.The analytical solution of threedimensional soil displacement field is established by introducing Pinto’s three-dimensional volume loss formula,which solves the problems that shield construction factors are not taken into account in Loganathan’s formula and only twodimensional soil displacement field can be obtained.In the second stage,based on Pasternak’s two-parameter foundation model,the analytical solution of pile displacement induced by shield tunneling in layered soil is derived.A case was found in the project of interval tunnels from Wanjiali Square to Furong District Government of Changsha Metro Line 5,where the shield tunnels were constructed near viaduct piles.The reliability of the analytical solution proposed in this study is verified by comparing with the field measured data and the results of finite element method(FEM).In addition,the comparisons of longitudinal,horizontal and vertical displacements of soil and pile foundation analyzed by the analytical solution and FEM provide corresponding theoretical basis,which has significant engineering guidance for similar projects.展开更多
In the last two decades,significant research has been conducted in the field of automated extraction of rock mass discontinuity characteristics from three-dimensional(3D)models.This provides several methodologies for ...In the last two decades,significant research has been conducted in the field of automated extraction of rock mass discontinuity characteristics from three-dimensional(3D)models.This provides several methodologies for acquiring discontinuity measurements from 3D models,such as point clouds generated using laser scanning or photogrammetry.However,even with numerous automated and semiautomated methods presented in the literature,there is not one single method that can automatically characterize discontinuities accurately in a minimum of time.In this paper,we critically review all the existing methods proposed in the literature for the extraction of discontinuity characteristics such as joint sets and orientations,persistence,joint spacing,roughness and block size using point clouds,digital elevation maps,or meshes.As a result of this review,we identify the strengths and drawbacks of each method used for extracting those characteristics.We found that the approaches based on voxels and region growing are superior in extracting joint planes from 3D point clouds.Normal tensor voting with trace growth algorithm is a robust method for measuring joint trace length from 3D meshes.Spacing is estimated by calculating the perpendicular distance between joint planes.Several independent roughness indices are presented to quantify roughness from 3D surface models,but there is a need to incorporate these indices into automated methodologies.There is a lack of efficient algorithms for direct computation of block size from 3D rock mass surface models.展开更多
An appropriate Monte Carlo method was developed to simulate the three-dimensional normal grain growth more completely. Comparative investigation on the three-dimensional and the cross-sectional characteristics of norm...An appropriate Monte Carlo method was developed to simulate the three-dimensional normal grain growth more completely. Comparative investigation on the three-dimensional and the cross-sectional characteristics of normal grain growth was done. It was found that the time exponent of grain growth determined from cross-section exhibits the same rule of increasing slowly with time and approaching the theoretical value n = 0.5 of steadygrain growth as the three-dimensional (3-D) system. From change of the number of grains per unit area with timemeasured in cross-section, the state of 3-D normal grain growth may be predicted. The gtain size distribution incross-section is different from that in 3-D system and can not express the evolution characteristic of the 3-D distribution. Furthermore, there exists statistical connection between the topological parameters in cross-section and thosein three-dimensions.展开更多
True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure p...True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure process and characteristics of a circular tunnel of surrounding rocks. The spalling failure under SWC can be divided into four periods: calm period, buckling deformation period, period of rock fragment gradual buckling and exfoliation, and period of formation of symmetrical V-shaped notches. When the horizontal axial and vertical stresses were constant, the spalling failure severity was reduced with the increase in lateral stress. Under natural water content, a strong rockburst with dynamic failure characteristics occurred on the circular hole sidewall. Under SWC, the failure severity was reduced and the circular hole sidewall experienced spalling failure, exhibiting progressive static failure characteristics.Therefore, water can reduce the failure severity of surrounding rocks in deep underground engineering, which has a certain guiding significance for the prevention and control of rockbursts.展开更多
Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive to...Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive tool for characterizing the microstructure of soil samples exposed to a range of damage levels induced by dry-wet cycles.Subsequently,the variations of pore distribution and permeability due to drywet cycling effects were revealed based on three-dimensional(3D)pore distribution analysis and seepage simulations.According to the results,granite residual soils could be separated into four different components,namely,pores,clay,quartz,and hematite,from micro-CT images.The reconstructed 3D pore models dynamically demonstrated the expanding and connecting patterns of pore structures during drywet cycles.The values of porosity and connectivity are positively correlated with the number of dry-wet cycles,which were expressed by exponential and linear functions,respectively.The pore volume probability distribution curves of granite residual soil coincide with the χ^(2)distribution curve,which verifies the effectiveness of the assumption of χ^(2)distribution probability.The pore volume distribution curves suggest that the pores in soils were divided into four types based on their volumes,i.e.micropores,mesopores,macropores,and cracks.From a quantitative and visual perspective,considerable small pores are gradually transformed into cracks with a large volume and a high connectivity.Under the action of dry-wet cycles,the number of seepage flow streamlines which contribute to water permeation in seepage simulation increases distinctly,as well as the permeability and hydraulic conductivity.The calculated hydraulic conductivity is comparable with measured ones with an acceptable error margin in general,verifying the accuracy of seepage simulations based on micro-CT results.展开更多
Methane in-situ explosion fracturing(MISEF)enhances permeability in shale reservoirs by detonating desorbed methane to generate detonation waves in perforations.Fracture propagation in bedding shale under varying expl...Methane in-situ explosion fracturing(MISEF)enhances permeability in shale reservoirs by detonating desorbed methane to generate detonation waves in perforations.Fracture propagation in bedding shale under varying explosion loads remains unclear.In this study,prefabricated perforated shale samples with parallel and vertical bedding are fractured under five distinct explosion loads using a MISEF experimental setup.High-frequency explosion pressure-time curves were monitored within an equivalent perforation,and computed tomography scanning along with three-dimensional reconstruction techniques were used to investigate fracture propagation patterns.Additionally,the formation mechanism and influencing factors of explosion crack-generated fines(CGF)were clarified by analyzing the morphology and statistics of explosion debris particles.The results indicate that methane explosion generated oscillating-pulse loads within perforations.Explosion characteristic parameters increase with increasing initial pressure.Explosion load and bedding orientation significantly influence fracture propagation patterns.As initial pressure increases,the fracture mode transitions from bi-wing to 4–5 radial fractures.In parallel bedding shale,radial fractures noticeably deflect along the bedding surface.Vertical bedding facilitates the development of transverse fractures oriented parallel to the cross-section.Bifurcation-merging of explosioninduced fractures generated CGF.CGF mass and fractal dimension increase,while average particle size decreases with increasing explosion load.This study provides valuable insights into MISEF technology.展开更多
A novel Ni（II） coordination polymer [Ni（dtba）（4,4′-bpy）] （1, H2dtba = 2,2′-dithio- bisbenzoic acid, 4,4′-bpy = 4,4′-bipyridine） has been synthesized by H2dtba and Ni（CH3COO）2·4H2O with exo-bidentate...A novel Ni（II） coordination polymer [Ni（dtba）（4,4′-bpy）] （1, H2dtba = 2,2′-dithio- bisbenzoic acid, 4,4′-bpy = 4,4′-bipyridine） has been synthesized by H2dtba and Ni（CH3COO）2·4H2O with exo-bidentate rigid ligand 4,4′-bpy by using hydrothermal method, and its structure was determined by single-crystal X-ray diffraction. X-ray crystal structure analysis reveals that complex 1 crystallizes in monoclinic, space group Cc with a = 11.7624（9）, b = 18.7933（19）, c = 10.3071（11）, β = 97.6510（10）°, V = 2258.2（4）3, Z = 4, C24H16N2NiO4S2, Mr = 519.22, Dc = 1.527 g/cm3, μ = 1.079 mm-1 and F（000） = 1064. The structure was solved by direct methods and refined to R = 0.0434 and wR = 0.1000 for 3281 observed reflections （I 〉 2σ（I））. The coordination environment of Ni（II） is a distorted octahedron, and a three-dimensional structure was formed with the coordination effect of dtba2- and 4,4′-bpy ligands. The topological analysis reveals that the whole framework of 1 is a 2-nodal net of （52.6）（53.64.72.8） topology. The thermal stability and XRD pattern of 1 were also investigated展开更多
The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynami...The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynamic characteristics of the area of ASD were observed, and the overall and local volume and functions of the patients with ASD were measured. RT 3DE was performed on the 27 normal controls and 28 patients with ASD. Based on the three-dimensional data workstations, the area of ASD was measured at P wave vertex, R wave vertex, T wave starting point, and T wave terminal point and in the T-P section. The right atrial volume in the same time phase of the cardiac cycle and the motion displacement distance of the tricuspid annulus in the corresponding period were measured. The measured value of the area of ASD was analyzed. The changes in the right atrial volume and the motion displacement distance of the tricuspid annulus in the normal control group and the ASD group were compared. The right ventricular ejection fractions in the normal control group and the ASD group were compared using the RT 3DE long-axis eight-plane（LA 8-plane） method. Real-time three-dimensional volume imaging was performed in the normal control group and ASD group（n=30）. The right ventricular inflow tract, outflow tract, cardiac apex muscular trabecula dilatation, end-systolic volume, overall dilatation, end-systolic volume, and appropriate local and overall ejection fractions in both two groups were measured with the four-dimensional right ventricular quantitative analysis method（4D RVQ） and compared. The overall right ventricular volume and the ejection fraction measured by the LA 8-plane method and 4D RVQ were subjected to a related analysis. Dynamic changes occurred to the area of ASD in the cardiac cycle. The rules for dynamic changes in the area of ASD and the rules for changes in the right atrial volume in the cardiac cycle were consistent. The maximum value of the changes in the right atrial volume occurred in the end-systolic period when the peak of the curve appeared. The minimum value of the changes occurred in the end-systolic period and was located at the lowest point of the volume variation curve. The area variation curve for ASD and the motion variation curve for the tricuspid annulus in the cardiac cycle were the same. The displacement of the tricuspid annulus exhibited directionality. The measured values of the area of ASD at P wave vertex, R wave vertex, T wave starting point, T wave terminal point and in the T-P section were properly correlated with the right atrial volume（P〈0.001）. The area of ASD and the motion displacement distance of the tricuspid annulus were negatively correlated（P〈0.05）. The right atrial volumes in the ASD group in the cardiac cycle in various time phases increased significantly as compared with those in the normal control group（P=0.0001）. The motion displacement distance of the tricuspid annulus decreased significantly in the ASD group as compared with that in the normal control group（P=0.043）. The right ventricular ejection fraction in the ASD group was lower than that in the normal control group（P=0.032）. The ejection fraction of the cardiac apex trabecula of the ASD patients was significantly lower than the ejection fractions of the right ventricular outflow tract and inflow tract and overall ejection fraction. The difference was statistically significant（P=0.005）. The right ventricular local and overall dilatation and end-systolic volumes in the ASD group increased significantly as compared with those in the normal control group（P=0.031）. The a RVEF and the overall ejection fraction decreased in the ASD group as compared with those in the normal control group（P=0.0005）. The dynamic changes in the area of ASD and the motion curves for the right atrial volume and tricuspid annulus have the same dynamic characteristics. RT 3DE can be used to accurately evaluate the local and overall volume and functions of the right ventricle. The local and overall volume loads of the right ventricle in the ASD patients increase significantly as compared with those of the normal people. The right ventricular cardiac apex and the overall systolic function decrease.展开更多
Dynamic stability analysis of superconducting electro-dynamic maglev train under lateral and yawing motion condition is the key research content.The novel three-dimensional electromagnetic model of integrated linear s...Dynamic stability analysis of superconducting electro-dynamic maglev train under lateral and yawing motion condition is the key research content.The novel three-dimensional electromagnetic model of integrated linear synchronous motor in electro-dynamic maglev train with yawing operation condition is proposed,which can not only simultaneously achieve the propulsion,levitation and guidance performances of maglev vehicle,but also analyze the dynamic stability performance of train with yawing condition.The three-dimensional analytical method is introduced for analyzing the electromagnetic force characteristics of the linear synchronous motor with the yawing operation condition.Firstly,the topology structure and operation principle of the linear synchronous motor with yawing attitude are proposed.Secondly,the three-dimensional analytical model and expressions of electromagnetic characteristics are obtained by equivalent circuit method and Fourier decomposition method,such as levitation force,guidance force,propulsion force and yawing torque,etc.Finally,the three-dimensional electromagnetic characteristics of the linear synchronous motor are calculated under yawing operation conditions of maglev train,and the correctness of the analytical theory is verified by the finite element analysis and measured data on the test line.展开更多
Owls are widely known for their silent flight,which is attributed to their unique wing morphologies comprising leading-edge(LE)serrations,trailing-edge(TE)fringes,and a velvety surface.The aeroacoustic characteristics...Owls are widely known for their silent flight,which is attributed to their unique wing morphologies comprising leading-edge(LE)serrations,trailing-edge(TE)fringes,and a velvety surface.The aeroacoustic characteristics of owl-inspired TE fringes have been widely investigated through two-dimensional(2D)modeling,but remain yet poorly studied in association with their three-dimensional(3D)effects.Here,we present a numerical study of the 3D aeroacoustic characteristics of owl-inspired TE fringes in which we combined large-eddy simulations(LES)with the Ffowcs Williams‒Hawkings analogy.We constructed a clean wing model and three wing models with TE fringes that were distributed differently spanwise.The aerodynamic forces and 3D acoustic characteristics reveal that,like the 2D results of our previous studies,the 3D TE fringes enable remarkable sound reduction spatially while having aerodynamic performance comparable to the clean model.Visualizations of the near-field 3D flow structures,vortex dynamics,and flow fluctuations show that TE fringes can robustly alter the 3D flow by breaking 3D TE vortices into small eddies and mitigating 3D flow fluctuations.Particularly,it is verified that TE fringes alter spanwise flows,thus dominating the 3D aeroacoustic characteristics in terms of passive flow control and flow stabilizations,whereas the fringes are inefficient in suppressing the acoustic sources induced by wingtip vortices.Moreover,the TE fringes distributed at midspan have better acoustic performance than those in the vicinity of the wingtip,indicating the importance of a spanwise distribution in enhancing aeroacoustic performance.展开更多
Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyze...Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyzed the fracture surface characteristics induced by supercritical carbon dioxide(SC-CO_(2))and water in open-hole and perforation completion conditions under triaxial stresses.A simple calculation method was proposed to quantitatively analyze the fracture surface area and roughness in macro-level based on three-dimensional(3D)scanning data.In micro-level,scanning electron micrograph(SEM)was used to analyze the features of fracture surface.The results showed that the surface area of the induced fracture increases with perforation angle for both SC-CO_(2)and water fracturing,and the surface area of SC-CO_(2)-induced fracture is 6.49%e58.57%larger than that of water-induced fracture.The fractal dimension and surface roughness of water-induced fractures increase with the increase in perforation angle,while those of SC-CO_(2)-induced fractures decrease with the increasing perforation angle.A considerable number of microcracks and particle peeling pits can be observed on SC-CO_(2)-induced fracture surface while there are more flat particle surfaces in water-induced fracture surface through SEM images,indicating that fractures tend to propagate along the boundary of the particle for SC-CO_(2)fracturing while water-induced fractures prefer to cut through particles.These findings are of great significance for analyzing fracture mechanism and evaluating fracturing stimulation performance.展开更多
One new polyoxotungstate complex H6Na2K4（H2W12O42）Cl2·14H2O 1 has been prepared in the beaker solution and characterized by elemental analysis and IR spectroscopy. Crystal data： H36Cl2K4W12Na2O56, Mr = 3411.77...One new polyoxotungstate complex H6Na2K4（H2W12O42）Cl2·14H2O 1 has been prepared in the beaker solution and characterized by elemental analysis and IR spectroscopy. Crystal data： H36Cl2K4W12Na2O56, Mr = 3411.77, monoclinic, space group P21/c, a = 11.5734（16）, b = 14.3136（19）, c = 15.459（2）A, β = 105.601（2）°, V = 2466.5（6）A^3, Z = 2, Dc = 4.594 g/cm^3, F（000） = 3008, μ = 28.447 mm^-1, R = 0.0574 and wR = 0.1239 （Ⅰ〉 2σ（Ⅰ））. Single-crystal X-ray diffraction analysis results reveal that a three-dimensional architecture in the title compound is constructed from the H2W12O42^10- units linked by potassium.展开更多
In order to increase the electrode surface area and enhance the charge storage capacity, we study the micro electro mechanical system technology to fabricate three-dimensional high aspect ratio micro-electrode structu...In order to increase the electrode surface area and enhance the charge storage capacity, we study the micro electro mechanical system technology to fabricate three-dimensional high aspect ratio micro-electrode structure based on glass. The anodic constant potential method is employed to deposit manganese oxide as electroactive substances on the micro-electrode surface. Cyclic voltammetry and constant current charge-discharge method are both used to prepare electrode electrochemical performance testing, with a two-dimensional electrode without structure for comparison. Experimental results show that three-dimensional elec- trode structure can effectively enhance the charge storage capacity. At 1.0 mA/cm2 charge- discharge density, the three-dimensional electrode shows a capacitance of 17.88 mF/cm2, seven times higher than the two-dimensional electrode.展开更多
To estimate basal water storage beneath the Antarctic ice sheet, it is essential to have data on the three-dimensional characteristics of subglacial lakes. We present a method to estimate the water depth and surface a...To estimate basal water storage beneath the Antarctic ice sheet, it is essential to have data on the three-dimensional characteristics of subglacial lakes. We present a method to estimate the water depth and surface area of Antarctic subglacial lakes from the inversion of hydraulic potential method. Lake Vostok is chosen as a case study because of the diverse and comprehensive measurements that have been obtained over and around the lake. The average depth of Lake Vostok is around 345±4 m. We estimated the surface area of Lake Vostok beneath the ice sheet to be about 13300±594 km^2. The lake consists of two sub-basins separated by a ridge at water depths of about 200–300 m. The surface area of the northern sub-basin is estimated to be about half of that of the southern basin. The maximum depths of the northern and southern sub-basins are estimated to be about 450 and 850 m, respectively. Total water volume is estimated to be about 4658±204 km^3. These estimates are compared with previous estimates obtained from seismic data and inversion of aerogravity data. In general, our estimates are closer to those obtained from the inversion of aerogravity data than those from seismic data, indicating the applicability of our method to the estimation of water depths of other subglacial lakes.展开更多
Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D)...Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D) coupledmode model is developed to calculate the acoustic field in an ocean waveguide with seamount topography and analyze the3D effect. In this model, a correction is introduced in the bottom boundary, theoretically making the acoustic field satisfy the energy conservation. Furthermore, a large azimuth angle calculation range is obtained by using the operator theory and higher-order Pade approximation. Additionally, the model has advantages related to the coupling mode and parabolic equation theory. The couplings corresponding to the effects of range-dependent environment are fully considered, and the numerical implementation is kept feasible. After verifying the accuracy and reliability of the model, low-frequency sound propagation characteristics in the seamount environment are analyzed. The results indicate lateral variability in bathymetry can lead to out-of-plane effects such as the horizontal refraction phenomenon, while the coupling effect tends to restore the abnormal sound field and produces acoustic field diffraction behind the seamount. This model effectively considers the effects of the horizontal refraction and coupling, which are proportional to the scale of the seamount.展开更多
[Objective] The research aimed to study three-dimensional structure and echo characteristic quantity of a supercell storm in central Gansu on May 30,2005.[Method] By monitoring data of Lanzhou CINRAD/CC Doppler radar,...[Objective] The research aimed to study three-dimensional structure and echo characteristic quantity of a supercell storm in central Gansu on May 30,2005.[Method] By monitoring data of Lanzhou CINRAD/CC Doppler radar,the three-dimensional structure characteristics of a rare supercell storm which happened in central Gansu on May 30,2005 were analyzed.We tried to reveal three-dimensional structure and echo characteristic index of supercell storm in the northeast of Qinghai-Tibet Plateau,and find reason of rare heavy hail appearance.[Result] The large-scale strong storm was formed by the common effect of Mongolia cold vortex,low-level jet and ground cold front.When the development of main echo was mature,on reflectivity factor map,it presented obvious inverted 'V' shaped structure in left front of low-level storm,typical hooked and 'person'-type echo characteristics in the right rear.The bounded weak echo zone(vault) in low level corresponded with strong echo overhanging body in high level.It surpassed 60 dBz in the strong reflectivity factor zone.It presented one weak meso-cyclone on corresponding radial velocity map.The jumped increase characteristic of VIL could be as one of indices for judging that hail started to grow.Almost all storms(VILD ≥4.0 g/m3) had more obvious indication significance than VIL for judging heavy hail(diameter ≥20 mm).[Conclusion] The research provided reference for nowcasting of strong convection weather and artificial hail suppression.展开更多
基金The National Natural Science Foundation of China under contract Nos NSFC 41806030 and 42076021the China Ocean Mineral Resources Research and Development Association Program under contract No.DY135-E2-3-01+4 种基金the Basic Scientific Research Business Expenses of Zhejiang Provincial Universities under contract No.2020J00007the project of State Key Laboratory of Tropical Oceanography,South China Sea Institute of Oceanology,Chinese Academy of Sciences under contract No.LTO1807the project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)under contract No.SML2020SP007the Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)under contract No.311020004the Strategic Priority Research Program of Chinese Academy of Sciences under contract No.XDB42000000。
文摘Mesoscale eddies play vital roles in ocean processes.Although previous studies focused on eddy surface features and individual three-dimensional(3D)eddy cases in the northwestern Pacific Ocean,the analysis of unique eddy3D regional characteristics is still lacking.A 3D eddy detection scheme is applied to 9 years(2000-2008)of eddyresolving Regional Ocean Modeling System(ROMS)output to obtain a 3D eddy dataset from the surface to a depth of 1000 m in the northwestern Pacific Ocean(15°-35°N,120°-145°E).The 3D characteristics of mesoscale eddies are analyzed in two regions,namely,Box1(Subtropical Countercurrent,15°-25°N,120°-145°E)and Box2(Southern Kuroshio Extension,25°-35°N,120°-145°E).In Box1,the current is characterized by strong vertical shear and weak horizontal shear.In Box2,the current is characterized by the strong Kuroshio,topographic effect,and the westward propagation of Rossby waves.The results indicate the importance of baroclinic instability in Box1,whereas in Box2,both the barotropic and baroclinic instability are important.Moreover,the mesoscale eddies’properties in Box1 and Box2 are distinct.The eddies in Box1 have larger number and radius but a shorter lifetime.By contrast,Box2 has fewer eddies,which have smaller radius but longer lifetime.Vertically,more eddies are detected at the subsurface than at the surface in both regions;the depth of 650 m is the turning point in Box1.Above this depth,the number of cyclonic eddies(CEs)is larger than that of anticyclonic eddies(AEs).In Box2,the number of CEs is dominant vertically.Eddy kinetic energy(EKE)and mean normalized relative vorticity in Box2are significantly higher than those in Box1.With increasing depth,the attenuation trend of EKE and relative vorticity of Box1 become greater than those of Box2.Furthermore,the upper ocean(about 300 m in depth)contains 68.6%of the eddies(instantaneous eddy).Only 16.6%of the eddies extend to 1000 m.In addition,about87%of the eddies are bowl-shaped eddies in the two regions.Only about 3%are cone-shaped eddies.With increasing depth of the eddies,the proportion of bowl-shaped eddies gradually decreases.Conversely,the coneand lens-shaped eddies are equal in number at 700-1000 m,accounting for about 30%each.Studying the 3D characteristics of eddies in two different regions of the northwestern Pacific Ocean is an important stepping stone for discussing the different eddy generation mechanisms.
文摘Particulate-reinforced metal matrix composites(PRMMCs)are difficult to machine due to the inclusion of hard,brittle reinforcing particles.Existing experimental investigations rarely reveal the complex material removal mechanisms(MRMs)involved in the machining of PRMMCs.This paper develops a three-dimensional(3D)microstructure-based model for investigating the MRM and surface integrity of machined PRMMCs.To accurately mimic the actual microstructure of a PRMMC,polyhedrons were randomly distributed inside the matrix to represent irregular SiC particles.Particle fracture and matrix deformation and failure were taken into account.For the model’s capability comparison,a two-dimensional(2D)analysis was also conducted.Relevant cutting experiments showed that the established 3D model accurately predicted the material removal,chip morphology,machined surface finish,and cutting forces.It was found that the matrix-particle-tool interactions led to particle fractures,mainly in the primary shear and secondary deformation zones along the cutting path and beneath the machined surface.Particle fracture and dilodegment greatly influences the quality of a machined surface.It was also found that although a 2D model can reflect certain material removal features,its ability to predict microstructural variation is limited.
基金Under the auspices of the Shandong Provincial Natural Science Foundation(No.ZR2024ME171,ZR2024QD207)the National Natural Science Foundation of China(No.41471160,42377077)。
文摘Owing to the complexity of droughts,detailed assessments of drought events have become a key issue in water resource management and planning.In this study,three-dimensional copula models at Standard Precipitation Evapotranspiration Index(SPEI)-1,SPEI-3,SPEI-6,and SPEI-12 were used to assess drought risks in the Haihe River Basin(HRB)of China from 1961–2020.Drought duration,severity,and peak,as indicated by SPEI,were extracted based on run theory and fitted with suitable marginal distributions.The difference between the joint return period(Tor)and the co-occurrence return period(Tand)could explain the intrinsic correlation between drought characteristics.The smaller the difference,the stronger the correlation.The results showed that droughts in the north-western region of the HRB were characterized by high peak,intense severity,and long duration.In contrast,the eastern region exhibited a higher frequency of drought occurrence.Furthermore,the decreasing trend in precipitation dominated droughts,and topography of the northwest region creates the features of low annual precipitation with more days of precipitation.The drought events in the HRB were influenced by the phase shift between El Niño and La Niña.There was a strong negative phase coupling between SPEI-12 and Niño3.4(R^(2)≥0.77).The transition from La Niña to El Niño was responsible for severe droughts in the HRB.The El Niño-Southern Oscillation could predict droughts with lag times of 0.15–4.35 mon in mountainous areas.
基金Project(52078060) supported by the National Natural Science Foundation of ChinaProject(2020JJ4606)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2018IC19) supported by the International Cooperation and Development Project of Double-First-Class Scientific Research in Changsha University of Science&Technology,ChinaProject(18ZDXK05) supported by Innovative Program of Key Disciplines with Advantages and Characteristics of Civil Engineering of Changsha University of Science&Technology,China。
文摘Shield tunneling inevitably passes through a large number of pile foundations in urban areas.Thus,an accurate assessment of tunneling-induced pile displacement and potential damage becomes a critical part of shield construction.This study presents a mechanism research of pile-soil-tunnel interaction through Pasternak-based two-stage analysis method.In the first stage,based on Mindlin’s solution,the soil displacement fields induced by shield thrust force,cutterhead frictions,shield shell frictions and grouting pressure are derived.The analytical solution of threedimensional soil displacement field is established by introducing Pinto’s three-dimensional volume loss formula,which solves the problems that shield construction factors are not taken into account in Loganathan’s formula and only twodimensional soil displacement field can be obtained.In the second stage,based on Pasternak’s two-parameter foundation model,the analytical solution of pile displacement induced by shield tunneling in layered soil is derived.A case was found in the project of interval tunnels from Wanjiali Square to Furong District Government of Changsha Metro Line 5,where the shield tunnels were constructed near viaduct piles.The reliability of the analytical solution proposed in this study is verified by comparing with the field measured data and the results of finite element method(FEM).In addition,the comparisons of longitudinal,horizontal and vertical displacements of soil and pile foundation analyzed by the analytical solution and FEM provide corresponding theoretical basis,which has significant engineering guidance for similar projects.
基金funded by the U.S.National Institute for Occupational Safety and Health(NIOSH)under the Contract No.75D30119C06044。
文摘In the last two decades,significant research has been conducted in the field of automated extraction of rock mass discontinuity characteristics from three-dimensional(3D)models.This provides several methodologies for acquiring discontinuity measurements from 3D models,such as point clouds generated using laser scanning or photogrammetry.However,even with numerous automated and semiautomated methods presented in the literature,there is not one single method that can automatically characterize discontinuities accurately in a minimum of time.In this paper,we critically review all the existing methods proposed in the literature for the extraction of discontinuity characteristics such as joint sets and orientations,persistence,joint spacing,roughness and block size using point clouds,digital elevation maps,or meshes.As a result of this review,we identify the strengths and drawbacks of each method used for extracting those characteristics.We found that the approaches based on voxels and region growing are superior in extracting joint planes from 3D point clouds.Normal tensor voting with trace growth algorithm is a robust method for measuring joint trace length from 3D meshes.Spacing is estimated by calculating the perpendicular distance between joint planes.Several independent roughness indices are presented to quantify roughness from 3D surface models,but there is a need to incorporate these indices into automated methodologies.There is a lack of efficient algorithms for direct computation of block size from 3D rock mass surface models.
文摘An appropriate Monte Carlo method was developed to simulate the three-dimensional normal grain growth more completely. Comparative investigation on the three-dimensional and the cross-sectional characteristics of normal grain growth was done. It was found that the time exponent of grain growth determined from cross-section exhibits the same rule of increasing slowly with time and approaching the theoretical value n = 0.5 of steadygrain growth as the three-dimensional (3-D) system. From change of the number of grains per unit area with timemeasured in cross-section, the state of 3-D normal grain growth may be predicted. The gtain size distribution incross-section is different from that in 3-D system and can not express the evolution characteristic of the 3-D distribution. Furthermore, there exists statistical connection between the topological parameters in cross-section and thosein three-dimensions.
基金financial support from the National Natural Science Foundation of China (Nos.51904335,41630642)。
文摘True-triaxial compression tests were carried out on cubic granite samples with a circular through hole using a true-triaxial testing system to investigate the influence of saturated water content(SWC) on the failure process and characteristics of a circular tunnel of surrounding rocks. The spalling failure under SWC can be divided into four periods: calm period, buckling deformation period, period of rock fragment gradual buckling and exfoliation, and period of formation of symmetrical V-shaped notches. When the horizontal axial and vertical stresses were constant, the spalling failure severity was reduced with the increase in lateral stress. Under natural water content, a strong rockburst with dynamic failure characteristics occurred on the circular hole sidewall. Under SWC, the failure severity was reduced and the circular hole sidewall experienced spalling failure, exhibiting progressive static failure characteristics.Therefore, water can reduce the failure severity of surrounding rocks in deep underground engineering, which has a certain guiding significance for the prevention and control of rockbursts.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12102312 and 41372314)State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Open Foundation, Chengdu University of Technology, China (Grant No. SKLGP2021K011)
文摘Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive tool for characterizing the microstructure of soil samples exposed to a range of damage levels induced by dry-wet cycles.Subsequently,the variations of pore distribution and permeability due to drywet cycling effects were revealed based on three-dimensional(3D)pore distribution analysis and seepage simulations.According to the results,granite residual soils could be separated into four different components,namely,pores,clay,quartz,and hematite,from micro-CT images.The reconstructed 3D pore models dynamically demonstrated the expanding and connecting patterns of pore structures during drywet cycles.The values of porosity and connectivity are positively correlated with the number of dry-wet cycles,which were expressed by exponential and linear functions,respectively.The pore volume probability distribution curves of granite residual soil coincide with the χ^(2)distribution curve,which verifies the effectiveness of the assumption of χ^(2)distribution probability.The pore volume distribution curves suggest that the pores in soils were divided into four types based on their volumes,i.e.micropores,mesopores,macropores,and cracks.From a quantitative and visual perspective,considerable small pores are gradually transformed into cracks with a large volume and a high connectivity.Under the action of dry-wet cycles,the number of seepage flow streamlines which contribute to water permeation in seepage simulation increases distinctly,as well as the permeability and hydraulic conductivity.The calculated hydraulic conductivity is comparable with measured ones with an acceptable error margin in general,verifying the accuracy of seepage simulations based on micro-CT results.
基金funded by the National Key Research and Development Program of China(No.2020YFA0711800)the National Science Fund for Distinguished Young Scholars(No.51925404)+2 种基金the National Natural Science Foundation of China(No.12372373)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX24_2909)the Graduate Innovation Program of China University of Mining and Technology(No.2024WLKXJ134)。
文摘Methane in-situ explosion fracturing(MISEF)enhances permeability in shale reservoirs by detonating desorbed methane to generate detonation waves in perforations.Fracture propagation in bedding shale under varying explosion loads remains unclear.In this study,prefabricated perforated shale samples with parallel and vertical bedding are fractured under five distinct explosion loads using a MISEF experimental setup.High-frequency explosion pressure-time curves were monitored within an equivalent perforation,and computed tomography scanning along with three-dimensional reconstruction techniques were used to investigate fracture propagation patterns.Additionally,the formation mechanism and influencing factors of explosion crack-generated fines(CGF)were clarified by analyzing the morphology and statistics of explosion debris particles.The results indicate that methane explosion generated oscillating-pulse loads within perforations.Explosion characteristic parameters increase with increasing initial pressure.Explosion load and bedding orientation significantly influence fracture propagation patterns.As initial pressure increases,the fracture mode transitions from bi-wing to 4–5 radial fractures.In parallel bedding shale,radial fractures noticeably deflect along the bedding surface.Vertical bedding facilitates the development of transverse fractures oriented parallel to the cross-section.Bifurcation-merging of explosioninduced fractures generated CGF.CGF mass and fractal dimension increase,while average particle size decreases with increasing explosion load.This study provides valuable insights into MISEF technology.
基金the National Natural Science Foundation of China (No. 20771006, 20901004 and 20801025)
文摘A novel Ni（II） coordination polymer [Ni（dtba）（4,4′-bpy）] （1, H2dtba = 2,2′-dithio- bisbenzoic acid, 4,4′-bpy = 4,4′-bipyridine） has been synthesized by H2dtba and Ni（CH3COO）2·4H2O with exo-bidentate rigid ligand 4,4′-bpy by using hydrothermal method, and its structure was determined by single-crystal X-ray diffraction. X-ray crystal structure analysis reveals that complex 1 crystallizes in monoclinic, space group Cc with a = 11.7624（9）, b = 18.7933（19）, c = 10.3071（11）, β = 97.6510（10）°, V = 2258.2（4）3, Z = 4, C24H16N2NiO4S2, Mr = 519.22, Dc = 1.527 g/cm3, μ = 1.079 mm-1 and F（000） = 1064. The structure was solved by direct methods and refined to R = 0.0434 and wR = 0.1000 for 3281 observed reflections （I 〉 2σ（I））. The coordination environment of Ni（II） is a distorted octahedron, and a three-dimensional structure was formed with the coordination effect of dtba2- and 4,4′-bpy ligands. The topological analysis reveals that the whole framework of 1 is a 2-nodal net of （52.6）（53.64.72.8） topology. The thermal stability and XRD pattern of 1 were also investigated
文摘The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynamic characteristics of the area of ASD were observed, and the overall and local volume and functions of the patients with ASD were measured. RT 3DE was performed on the 27 normal controls and 28 patients with ASD. Based on the three-dimensional data workstations, the area of ASD was measured at P wave vertex, R wave vertex, T wave starting point, and T wave terminal point and in the T-P section. The right atrial volume in the same time phase of the cardiac cycle and the motion displacement distance of the tricuspid annulus in the corresponding period were measured. The measured value of the area of ASD was analyzed. The changes in the right atrial volume and the motion displacement distance of the tricuspid annulus in the normal control group and the ASD group were compared. The right ventricular ejection fractions in the normal control group and the ASD group were compared using the RT 3DE long-axis eight-plane（LA 8-plane） method. Real-time three-dimensional volume imaging was performed in the normal control group and ASD group（n=30）. The right ventricular inflow tract, outflow tract, cardiac apex muscular trabecula dilatation, end-systolic volume, overall dilatation, end-systolic volume, and appropriate local and overall ejection fractions in both two groups were measured with the four-dimensional right ventricular quantitative analysis method（4D RVQ） and compared. The overall right ventricular volume and the ejection fraction measured by the LA 8-plane method and 4D RVQ were subjected to a related analysis. Dynamic changes occurred to the area of ASD in the cardiac cycle. The rules for dynamic changes in the area of ASD and the rules for changes in the right atrial volume in the cardiac cycle were consistent. The maximum value of the changes in the right atrial volume occurred in the end-systolic period when the peak of the curve appeared. The minimum value of the changes occurred in the end-systolic period and was located at the lowest point of the volume variation curve. The area variation curve for ASD and the motion variation curve for the tricuspid annulus in the cardiac cycle were the same. The displacement of the tricuspid annulus exhibited directionality. The measured values of the area of ASD at P wave vertex, R wave vertex, T wave starting point, T wave terminal point and in the T-P section were properly correlated with the right atrial volume（P〈0.001）. The area of ASD and the motion displacement distance of the tricuspid annulus were negatively correlated（P〈0.05）. The right atrial volumes in the ASD group in the cardiac cycle in various time phases increased significantly as compared with those in the normal control group（P=0.0001）. The motion displacement distance of the tricuspid annulus decreased significantly in the ASD group as compared with that in the normal control group（P=0.043）. The right ventricular ejection fraction in the ASD group was lower than that in the normal control group（P=0.032）. The ejection fraction of the cardiac apex trabecula of the ASD patients was significantly lower than the ejection fractions of the right ventricular outflow tract and inflow tract and overall ejection fraction. The difference was statistically significant（P=0.005）. The right ventricular local and overall dilatation and end-systolic volumes in the ASD group increased significantly as compared with those in the normal control group（P=0.031）. The a RVEF and the overall ejection fraction decreased in the ASD group as compared with those in the normal control group（P=0.0005）. The dynamic changes in the area of ASD and the motion curves for the right atrial volume and tricuspid annulus have the same dynamic characteristics. RT 3DE can be used to accurately evaluate the local and overall volume and functions of the right ventricle. The local and overall volume loads of the right ventricle in the ASD patients increase significantly as compared with those of the normal people. The right ventricular cardiac apex and the overall systolic function decrease.
基金supported in part by the National Natural Science Foundation of China under Grant 52077003 and 51777009。
文摘Dynamic stability analysis of superconducting electro-dynamic maglev train under lateral and yawing motion condition is the key research content.The novel three-dimensional electromagnetic model of integrated linear synchronous motor in electro-dynamic maglev train with yawing operation condition is proposed,which can not only simultaneously achieve the propulsion,levitation and guidance performances of maglev vehicle,but also analyze the dynamic stability performance of train with yawing condition.The three-dimensional analytical method is introduced for analyzing the electromagnetic force characteristics of the linear synchronous motor with the yawing operation condition.Firstly,the topology structure and operation principle of the linear synchronous motor with yawing attitude are proposed.Secondly,the three-dimensional analytical model and expressions of electromagnetic characteristics are obtained by equivalent circuit method and Fourier decomposition method,such as levitation force,guidance force,propulsion force and yawing torque,etc.Finally,the three-dimensional electromagnetic characteristics of the linear synchronous motor are calculated under yawing operation conditions of maglev train,and the correctness of the analytical theory is verified by the finite element analysis and measured data on the test line.
基金supported by a Grant-in-Aid for Scientific Research of KAKENHI,Japan Society for the Promotion of Science(Grant No.19H00750)J.R.acknowledges financial support from the Japanese Government through a MEXT scholarship.
文摘Owls are widely known for their silent flight,which is attributed to their unique wing morphologies comprising leading-edge(LE)serrations,trailing-edge(TE)fringes,and a velvety surface.The aeroacoustic characteristics of owl-inspired TE fringes have been widely investigated through two-dimensional(2D)modeling,but remain yet poorly studied in association with their three-dimensional(3D)effects.Here,we present a numerical study of the 3D aeroacoustic characteristics of owl-inspired TE fringes in which we combined large-eddy simulations(LES)with the Ffowcs Williams‒Hawkings analogy.We constructed a clean wing model and three wing models with TE fringes that were distributed differently spanwise.The aerodynamic forces and 3D acoustic characteristics reveal that,like the 2D results of our previous studies,the 3D TE fringes enable remarkable sound reduction spatially while having aerodynamic performance comparable to the clean model.Visualizations of the near-field 3D flow structures,vortex dynamics,and flow fluctuations show that TE fringes can robustly alter the 3D flow by breaking 3D TE vortices into small eddies and mitigating 3D flow fluctuations.Particularly,it is verified that TE fringes alter spanwise flows,thus dominating the 3D aeroacoustic characteristics in terms of passive flow control and flow stabilizations,whereas the fringes are inefficient in suppressing the acoustic sources induced by wingtip vortices.Moreover,the TE fringes distributed at midspan have better acoustic performance than those in the vicinity of the wingtip,indicating the importance of a spanwise distribution in enhancing aeroacoustic performance.
基金National Natural Science Foundation of China(Grant No.51804318)the China Postdoctoral Science Foundation Founded Project(Grant No.2019M650963)National Key Basic Research and Development Program of China(Grant No.2014CB239203).
文摘Morphology of hydraulic fracture surface has significant effects on oil and gas flow,proppant migration and fracture closure,which plays an important role in oil and gas fracturing stimulation.In this paper,we analyzed the fracture surface characteristics induced by supercritical carbon dioxide(SC-CO_(2))and water in open-hole and perforation completion conditions under triaxial stresses.A simple calculation method was proposed to quantitatively analyze the fracture surface area and roughness in macro-level based on three-dimensional(3D)scanning data.In micro-level,scanning electron micrograph(SEM)was used to analyze the features of fracture surface.The results showed that the surface area of the induced fracture increases with perforation angle for both SC-CO_(2)and water fracturing,and the surface area of SC-CO_(2)-induced fracture is 6.49%e58.57%larger than that of water-induced fracture.The fractal dimension and surface roughness of water-induced fractures increase with the increase in perforation angle,while those of SC-CO_(2)-induced fractures decrease with the increasing perforation angle.A considerable number of microcracks and particle peeling pits can be observed on SC-CO_(2)-induced fracture surface while there are more flat particle surfaces in water-induced fracture surface through SEM images,indicating that fractures tend to propagate along the boundary of the particle for SC-CO_(2)fracturing while water-induced fractures prefer to cut through particles.These findings are of great significance for analyzing fracture mechanism and evaluating fracturing stimulation performance.
基金The work was supported by NNSFC (No. 20501011)Liaocheng University (31801)
文摘One new polyoxotungstate complex H6Na2K4（H2W12O42）Cl2·14H2O 1 has been prepared in the beaker solution and characterized by elemental analysis and IR spectroscopy. Crystal data： H36Cl2K4W12Na2O56, Mr = 3411.77, monoclinic, space group P21/c, a = 11.5734（16）, b = 14.3136（19）, c = 15.459（2）A, β = 105.601（2）°, V = 2466.5（6）A^3, Z = 2, Dc = 4.594 g/cm^3, F（000） = 3008, μ = 28.447 mm^-1, R = 0.0574 and wR = 0.1239 （Ⅰ〉 2σ（Ⅰ））. Single-crystal X-ray diffraction analysis results reveal that a three-dimensional architecture in the title compound is constructed from the H2W12O42^10- units linked by potassium.
文摘In order to increase the electrode surface area and enhance the charge storage capacity, we study the micro electro mechanical system technology to fabricate three-dimensional high aspect ratio micro-electrode structure based on glass. The anodic constant potential method is employed to deposit manganese oxide as electroactive substances on the micro-electrode surface. Cyclic voltammetry and constant current charge-discharge method are both used to prepare electrode electrochemical performance testing, with a two-dimensional electrode without structure for comparison. Experimental results show that three-dimensional elec- trode structure can effectively enhance the charge storage capacity. At 1.0 mA/cm2 charge- discharge density, the three-dimensional electrode shows a capacitance of 17.88 mF/cm2, seven times higher than the two-dimensional electrode.
基金funded by the Natural Science Foundation of China (Grant nos. 41674085 and 41621091)the National Key Basic Research Program of China (973 program, Grant nos. 2012CB957703 and 2013CB733301)
文摘To estimate basal water storage beneath the Antarctic ice sheet, it is essential to have data on the three-dimensional characteristics of subglacial lakes. We present a method to estimate the water depth and surface area of Antarctic subglacial lakes from the inversion of hydraulic potential method. Lake Vostok is chosen as a case study because of the diverse and comprehensive measurements that have been obtained over and around the lake. The average depth of Lake Vostok is around 345±4 m. We estimated the surface area of Lake Vostok beneath the ice sheet to be about 13300±594 km^2. The lake consists of two sub-basins separated by a ridge at water depths of about 200–300 m. The surface area of the northern sub-basin is estimated to be about half of that of the southern basin. The maximum depths of the northern and southern sub-basins are estimated to be about 450 and 850 m, respectively. Total water volume is estimated to be about 4658±204 km^3. These estimates are compared with previous estimates obtained from seismic data and inversion of aerogravity data. In general, our estimates are closer to those obtained from the inversion of aerogravity data than those from seismic data, indicating the applicability of our method to the estimation of water depths of other subglacial lakes.
基金Project supported by the National Natural Science Foundation of China(Grant No.11804360)the IACAS Frontier Exploration Project(Grant No.QYTS202103)the Key Laboratory Foundation of Acoustic Science and Technology(Grant No.2021-JCJQ-LB-066-08)。
文摘Large-scale topography, such as a seamount, substantially impacts low-frequency sound propagation in an ocean waveguide, limiting the application of low-frequency acoustic detecting techniques. A three-dimensional(3D) coupledmode model is developed to calculate the acoustic field in an ocean waveguide with seamount topography and analyze the3D effect. In this model, a correction is introduced in the bottom boundary, theoretically making the acoustic field satisfy the energy conservation. Furthermore, a large azimuth angle calculation range is obtained by using the operator theory and higher-order Pade approximation. Additionally, the model has advantages related to the coupling mode and parabolic equation theory. The couplings corresponding to the effects of range-dependent environment are fully considered, and the numerical implementation is kept feasible. After verifying the accuracy and reliability of the model, low-frequency sound propagation characteristics in the seamount environment are analyzed. The results indicate lateral variability in bathymetry can lead to out-of-plane effects such as the horizontal refraction phenomenon, while the coupling effect tends to restore the abnormal sound field and produces acoustic field diffraction behind the seamount. This model effectively considers the effects of the horizontal refraction and coupling, which are proportional to the scale of the seamount.
基金Supported by Science Research Special Item of Public Welfare Industry (Meteorology) (GYHY200906024)New Meteorological Technology Spreading Item of China Meteorological Administration(CMATG2009MS38)
文摘[Objective] The research aimed to study three-dimensional structure and echo characteristic quantity of a supercell storm in central Gansu on May 30,2005.[Method] By monitoring data of Lanzhou CINRAD/CC Doppler radar,the three-dimensional structure characteristics of a rare supercell storm which happened in central Gansu on May 30,2005 were analyzed.We tried to reveal three-dimensional structure and echo characteristic index of supercell storm in the northeast of Qinghai-Tibet Plateau,and find reason of rare heavy hail appearance.[Result] The large-scale strong storm was formed by the common effect of Mongolia cold vortex,low-level jet and ground cold front.When the development of main echo was mature,on reflectivity factor map,it presented obvious inverted 'V' shaped structure in left front of low-level storm,typical hooked and 'person'-type echo characteristics in the right rear.The bounded weak echo zone(vault) in low level corresponded with strong echo overhanging body in high level.It surpassed 60 dBz in the strong reflectivity factor zone.It presented one weak meso-cyclone on corresponding radial velocity map.The jumped increase characteristic of VIL could be as one of indices for judging that hail started to grow.Almost all storms(VILD ≥4.0 g/m3) had more obvious indication significance than VIL for judging heavy hail(diameter ≥20 mm).[Conclusion] The research provided reference for nowcasting of strong convection weather and artificial hail suppression.
