This study investigates the motion behavior of a slender flexible particle in a backward-facing step(BFS)flow using the direct-forcing fictitious domain method,with a particular focus on the trapping phenomena near th...This study investigates the motion behavior of a slender flexible particle in a backward-facing step(BFS)flow using the direct-forcing fictitious domain method,with a particular focus on the trapping phenomena near the separation vortex region.Three distinct motion modes are identified:periodic rotation or oscillation within the vortex(trapping),downstream transport(escape),and transition state exhibiting unstable trapping.A dynamic balance among inward migration,centrifugal effects,wall interactions,and elastic forces enables the particle to achieve stable orbital motion within two distinct limit cycles.The topology of these orbits is governed by parameters,including the aspect ratio,structural flexibility,deformation intensity,and fluid inertia,all of which are characterized by the Reynolds number(Re).Specifically,fluid inertia plays a dominant role in facilitating particle trapping.At a fixed Re,a particle with a smaller aspect ratio tends to migrate inward and become trapped,whereas one with a larger aspect ratio is more likely to escape.Structural flexibility,especially when enhanced by confinement near the wall,leads to elastic deformation that induces secondary vortices and a weak flipping motion.The deformation intensityαsignificantly influences the lateral migration of the slender particle after the initial release;a largerαcauses it to drift toward the channel centerline,increasing the probability of escape.These findings provide a theoretical foundation for optimizing the transport and capture of slender soft swimmers in complex flow environments.展开更多
This paper proposes an infeasible interior-point algorithm with full-Newton step for linear complementarity problem,which is an extension of Roos about linear optimization. The main iteration of the algorithm consists...This paper proposes an infeasible interior-point algorithm with full-Newton step for linear complementarity problem,which is an extension of Roos about linear optimization. The main iteration of the algorithm consists of a feasibility step and several centrality steps. At last,we prove that the algorithm has O(nlog n/ε) polynomial complexity,which coincides with the best known one for the infeasible interior-point algorithm at present.展开更多
In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic syst...In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic systems are considered as kinematical constraints in this method.展开更多
Junior English for China’ is based on the ’Five-Step’ teachingmethod: Revision, Presentation, Drilling, Practice, Consolidation. Each step has itsown particular methodology and requires the teacher to adopt a certa...Junior English for China’ is based on the ’Five-Step’ teachingmethod: Revision, Presentation, Drilling, Practice, Consolidation. Each step has itsown particular methodology and requires the teacher to adopt a certain role. Thispaper is a discussion of the "Five-Step Method".展开更多
Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and ab...Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.展开更多
The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step meth...The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.展开更多
An integrated fluid-thermal-structural analysis approach is presented. In this approach, the heat conduction in a solid is coupled with the heat convection in the viscous flow of the fluid resulting in the thermal str...An integrated fluid-thermal-structural analysis approach is presented. In this approach, the heat conduction in a solid is coupled with the heat convection in the viscous flow of the fluid resulting in the thermal stress in the solid. The fractional four-step finite element method and the streamline upwind Petrov-Galerkin （SUPG） method are used to analyze the viscous thermal flow in the fluid. Analyses of the heat transfer and the thermal stress in the solid axe performed by the Galerkin method. The second-order semi- implicit Crank-Nicolson scheme is used for the time integration. The resulting nonlinear equations are lineaxized to improve the computational efficiency. The integrated analysis method uses a three-node triangular element with equal-order interpolation functions for the fluid velocity components, the pressure, the temperature, and the solid displacements to simplify the overall finite element formulation. The main advantage of the present method is to consistently couple the heat transfer along the fluid-solid interface. Results of several tested problems show effectiveness of the present finite element method, which provides insight into the integrated fluid-thermal-structural interaction phenomena.展开更多
demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,requi...demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,require optimization to improve their hydrodynamic performance and stability during design.Reducing resistance and improving longitudinal stability are key challenges in the design of high-speed vessels.Various methods are employed to overcome these challenges,with the use of a transverse step being one of the most common approaches.This study explores the effect of changing the angle of the aft-wise step and incorporates these changes into existing analytical formulas,resulting in new formulas specifically for high-speed vessels equipped with aft-wise steps.This research investigates how the angle of the transverse step affects the hydrodynamic performance and longitudinal stability of high-speed vessels.Based on the results,analytical formulas have been developed to calculate the wetted surface parameters of vessels equipped with an aft-wise transverse step.The study used experimental methods to analyze the vessel's behavior with six different aft-wise transverse step angles of 0°,9°,11°,13°,15°,and 17°at three speeds of 8,10,and 12 m/s.In the experimental tests,the hydrodynamic components of resistance,trim angle,and wetted surface of the vessel were measured.Results indicate that creating an angle in the transverse step substantially improves the hydrodynamic components and longitudinal stability of the vessel.At the optimal angle,the resistance and trim angle of the vessel were reduced by 7.8%and 12.8%,respectively,compared to the base vessel.Additionally,the existing analytical methods for calculating the wetted surface area are more accurate than similar methods.展开更多
In this paper,a fu-Newton step interior-point algorithm is proposed for solving P_(*)(k)-linear complementarity problem based on a new search direction,which is an extension of Grimes'algorithm.It is proved that t...In this paper,a fu-Newton step interior-point algorithm is proposed for solving P_(*)(k)-linear complementarity problem based on a new search direction,which is an extension of Grimes'algorithm.It is proved that the number of iterations of the algorithm is O(n^(1/2)(1+4κ)logn/ε),which matches the best known iteration bound of the interior-point method for P_(*)(k)-linear complementarity problem.Some numerical results have proved the feasibility and efficiency of the proposed algorithm.展开更多
The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of re...The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.展开更多
In this paper, the generalized nonlinear Schrodinger equation （GNLSE） is solved by an adaptive split-step Fourier method （ASSFM）. It is found that ASSFM must be used to solve GNLSE to ensure precision when the sol...In this paper, the generalized nonlinear Schrodinger equation （GNLSE） is solved by an adaptive split-step Fourier method （ASSFM）. It is found that ASSFM must be used to solve GNLSE to ensure precision when the soliton selffrequency shift is remarkable and the photonic crystal fibre （PCF） parameters vary with the frequency considerably. The precision of numerical simulation by using ASSFM is higher than that by using split-step Fourier method in the process of laser pulse propagation in PCFs due to the fact that the variation of fibre parameters with the peak frequency in the pulse spectrum can be taken into account fully.展开更多
In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solution...In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solutions are only valid for small values of the independent variable. The DTM solutions diverge for some differential equations that extremely have nonlinear behaviors or have boundary-conditions at infinity. For this reason the governing boundary-layer equations are solved by the Multi-step Differential Transform Method (MDTM). The main advantage of this method is that it can be applied directly to nonlinear differential equations without requiring linearization, discretization, or perturbation. It is a semi analytical-numerical technique that formulizes Taylor series in a very different manner. By applying the MDTM the interval of convergence for the series solution is increased. The MDTM is treated as an algorithm in a sequence of intervals for finding accurate approximate solutions for systems of differential equations. It is predicted that the MDTM can be applied to a wide range of engineering applications.展开更多
In this paper,a step approach method in the time domain is developed to calculate the radiated waves from an arbitrary obstacle pulsating with multiple frequencies.The computing scheme is based on the Boundary Integra...In this paper,a step approach method in the time domain is developed to calculate the radiated waves from an arbitrary obstacle pulsating with multiple frequencies.The computing scheme is based on the Boundary Integral Equation and derived in the time domain;thus,the time-harmonic Neumann boundary condition can be imposed.By the present method,the values of the initial conditions are set to zero,and the approach process is carried forward in a loop from the first time step to the last.At each time step,the radiated pressure on each element is updated.After several loops,the correct radiated pressures can be obtained.A sphere pulsating with a monopole frequency in an infinite acoustic domain is calculated first.This result is compared with the analytical solution,and both of them are in good agreement.Then,a complex-shaped radiator is taken as the studied case.The pulsating frequency of this case is multiple,and the waves propagate in half space.It is shown that the present method can treat multiple-frequency pulsation well,even when the radiator is a complex shape,and a robust convergence can be attained quickly.展开更多
An idea of relaxing the effect of delay when computing the Runge-Kutta stages in the current step and a class of two-step continuity Runge-Kutta methods （TSCRK） is presented. Their construction, their order conditio...An idea of relaxing the effect of delay when computing the Runge-Kutta stages in the current step and a class of two-step continuity Runge-Kutta methods （TSCRK） is presented. Their construction, their order conditions and their convergence are studied. The two-step continuity Runge-Kutta methods possess good numerical stability properties and higher stage-order, and keep the explicit process of computing the Runge-Kutta stages. The numerical experiments show that the TSCRK methods are efficient.展开更多
Soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy were studied as a function of cooling condition. The results show that higher permeability and relaxation frequency can be obtained by the two-step cooli...Soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy were studied as a function of cooling condition. The results show that higher permeability and relaxation frequency can be obtained by the two-step cooling method, and the pinning field of the sample obtained by this method is smaller than that of the furnace-cooled and water-quenched samples. This phenomenon was interpreted in terms of internal stress and the magnetic ordering of the residual amorphous phase. The two-step cooling treatment is an effective way to improve the soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy.展开更多
ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ...ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.展开更多
Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the pr...Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the presence of Na_3S_2O_4.展开更多
Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore th...Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore the dynamic behaviors of an FGM stepped beam with different boundary conditions based on an efficient solving method.Under the assumptions of the Euler-Bernoulli beam theory,the governing differential equations of an individual FGM beam are derived with Hamilton’s principle and decoupled via the separation-of-variable approach.Then,the free and forced vibrations of the FGM stepped beam are solved with the transfer matrix method(TMM).Two models,i.e.,a three-level FGM stepped beam and a five-level FGM stepped beam,are considered,and their natural frequencies and mode shapes are presented.To demonstrate the validity of the method in this paper,the simulation results by ABAQUS are also given.On this basis,the detailed parametric analyses on the frequencies and dynamic responses of the three-level FGM stepped beam are carried out.The results show the accuracy and efficiency of the TMM.展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.12132015,12332015,and 12302333)。
文摘This study investigates the motion behavior of a slender flexible particle in a backward-facing step(BFS)flow using the direct-forcing fictitious domain method,with a particular focus on the trapping phenomena near the separation vortex region.Three distinct motion modes are identified:periodic rotation or oscillation within the vortex(trapping),downstream transport(escape),and transition state exhibiting unstable trapping.A dynamic balance among inward migration,centrifugal effects,wall interactions,and elastic forces enables the particle to achieve stable orbital motion within two distinct limit cycles.The topology of these orbits is governed by parameters,including the aspect ratio,structural flexibility,deformation intensity,and fluid inertia,all of which are characterized by the Reynolds number(Re).Specifically,fluid inertia plays a dominant role in facilitating particle trapping.At a fixed Re,a particle with a smaller aspect ratio tends to migrate inward and become trapped,whereas one with a larger aspect ratio is more likely to escape.Structural flexibility,especially when enhanced by confinement near the wall,leads to elastic deformation that induces secondary vortices and a weak flipping motion.The deformation intensityαsignificantly influences the lateral migration of the slender particle after the initial release;a largerαcauses it to drift toward the channel centerline,increasing the probability of escape.These findings provide a theoretical foundation for optimizing the transport and capture of slender soft swimmers in complex flow environments.
基金Supported by the National Natural Science Fund Finances Projects(71071119)
文摘This paper proposes an infeasible interior-point algorithm with full-Newton step for linear complementarity problem,which is an extension of Roos about linear optimization. The main iteration of the algorithm consists of a feasibility step and several centrality steps. At last,we prove that the algorithm has O(nlog n/ε) polynomial complexity,which coincides with the best known one for the infeasible interior-point algorithm at present.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10572021 and 10372053）, and the Fundamental Research Foundation of Beijing Institute of Technology （BIT-UBF-200507A4206）.
文摘In this paper, a new computational method for improving the accuracy of numerically computed solutions is introduced. The computational method is based on the one-step method and conserved quantities of holonomic systems are considered as kinematical constraints in this method.
文摘Junior English for China’ is based on the ’Five-Step’ teachingmethod: Revision, Presentation, Drilling, Practice, Consolidation. Each step has itsown particular methodology and requires the teacher to adopt a certain role. Thispaper is a discussion of the "Five-Step Method".
基金supported by the International Science and Technology Cooperation Program of Science and Technology Bureau of Changchun City,China(Grant No.12ZX68)
文摘Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.
基金supported by the Science Fund of Anhui Province,China(Grant No 070414187)the National Fund for Fostering Talents in Basic Science of China(Grant No J0630319/J0103)
文摘The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.
基金the National Metal and Materials Technology Centerthe Thailand Research Fund+1 种基金the Office of Higher Education Commissionthe Chulalongkorn University for supporting the present research
文摘An integrated fluid-thermal-structural analysis approach is presented. In this approach, the heat conduction in a solid is coupled with the heat convection in the viscous flow of the fluid resulting in the thermal stress in the solid. The fractional four-step finite element method and the streamline upwind Petrov-Galerkin （SUPG） method are used to analyze the viscous thermal flow in the fluid. Analyses of the heat transfer and the thermal stress in the solid axe performed by the Galerkin method. The second-order semi- implicit Crank-Nicolson scheme is used for the time integration. The resulting nonlinear equations are lineaxized to improve the computational efficiency. The integrated analysis method uses a three-node triangular element with equal-order interpolation functions for the fluid velocity components, the pressure, the temperature, and the solid displacements to simplify the overall finite element formulation. The main advantage of the present method is to consistently couple the heat transfer along the fluid-solid interface. Results of several tested problems show effectiveness of the present finite element method, which provides insight into the integrated fluid-thermal-structural interaction phenomena.
文摘demand for faster vessels continues to grow,various high speed vessels have been designed and constructed for military,recreational,and passenger use.Planing vessels,specifically engineered for high-speed travel,require optimization to improve their hydrodynamic performance and stability during design.Reducing resistance and improving longitudinal stability are key challenges in the design of high-speed vessels.Various methods are employed to overcome these challenges,with the use of a transverse step being one of the most common approaches.This study explores the effect of changing the angle of the aft-wise step and incorporates these changes into existing analytical formulas,resulting in new formulas specifically for high-speed vessels equipped with aft-wise steps.This research investigates how the angle of the transverse step affects the hydrodynamic performance and longitudinal stability of high-speed vessels.Based on the results,analytical formulas have been developed to calculate the wetted surface parameters of vessels equipped with an aft-wise transverse step.The study used experimental methods to analyze the vessel's behavior with six different aft-wise transverse step angles of 0°,9°,11°,13°,15°,and 17°at three speeds of 8,10,and 12 m/s.In the experimental tests,the hydrodynamic components of resistance,trim angle,and wetted surface of the vessel were measured.Results indicate that creating an angle in the transverse step substantially improves the hydrodynamic components and longitudinal stability of the vessel.At the optimal angle,the resistance and trim angle of the vessel were reduced by 7.8%and 12.8%,respectively,compared to the base vessel.Additionally,the existing analytical methods for calculating the wetted surface area are more accurate than similar methods.
基金Supported by the Optimization Theory and Algorithm Research Team(23kytdzd004)the General Programs for Young Teacher Cultivation of Educational Commission of Anhui Province of China(YQYB2023090)the University Science Research Project of Anhui Province(2024AH050631)。
文摘In this paper,a fu-Newton step interior-point algorithm is proposed for solving P_(*)(k)-linear complementarity problem based on a new search direction,which is an extension of Grimes'algorithm.It is proved that the number of iterations of the algorithm is O(n^(1/2)(1+4κ)logn/ε),which matches the best known iteration bound of the interior-point method for P_(*)(k)-linear complementarity problem.Some numerical results have proved the feasibility and efficiency of the proposed algorithm.
文摘The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.
文摘In this paper, the generalized nonlinear Schrodinger equation （GNLSE） is solved by an adaptive split-step Fourier method （ASSFM）. It is found that ASSFM must be used to solve GNLSE to ensure precision when the soliton selffrequency shift is remarkable and the photonic crystal fibre （PCF） parameters vary with the frequency considerably. The precision of numerical simulation by using ASSFM is higher than that by using split-step Fourier method in the process of laser pulse propagation in PCFs due to the fact that the variation of fibre parameters with the peak frequency in the pulse spectrum can be taken into account fully.
文摘In this study, a reliable algorithm to develop approximate solutions for the problem of fluid flow over a stretching or shrinking sheet is proposed. It is depicted that the differential transform method (DTM) solutions are only valid for small values of the independent variable. The DTM solutions diverge for some differential equations that extremely have nonlinear behaviors or have boundary-conditions at infinity. For this reason the governing boundary-layer equations are solved by the Multi-step Differential Transform Method (MDTM). The main advantage of this method is that it can be applied directly to nonlinear differential equations without requiring linearization, discretization, or perturbation. It is a semi analytical-numerical technique that formulizes Taylor series in a very different manner. By applying the MDTM the interval of convergence for the series solution is increased. The MDTM is treated as an algorithm in a sequence of intervals for finding accurate approximate solutions for systems of differential equations. It is predicted that the MDTM can be applied to a wide range of engineering applications.
文摘In this paper,a step approach method in the time domain is developed to calculate the radiated waves from an arbitrary obstacle pulsating with multiple frequencies.The computing scheme is based on the Boundary Integral Equation and derived in the time domain;thus,the time-harmonic Neumann boundary condition can be imposed.By the present method,the values of the initial conditions are set to zero,and the approach process is carried forward in a loop from the first time step to the last.At each time step,the radiated pressure on each element is updated.After several loops,the correct radiated pressures can be obtained.A sphere pulsating with a monopole frequency in an infinite acoustic domain is calculated first.This result is compared with the analytical solution,and both of them are in good agreement.Then,a complex-shaped radiator is taken as the studied case.The pulsating frequency of this case is multiple,and the waves propagate in half space.It is shown that the present method can treat multiple-frequency pulsation well,even when the radiator is a complex shape,and a robust convergence can be attained quickly.
文摘An idea of relaxing the effect of delay when computing the Runge-Kutta stages in the current step and a class of two-step continuity Runge-Kutta methods （TSCRK） is presented. Their construction, their order conditions and their convergence are studied. The two-step continuity Runge-Kutta methods possess good numerical stability properties and higher stage-order, and keep the explicit process of computing the Runge-Kutta stages. The numerical experiments show that the TSCRK methods are efficient.
基金Project(50501008) supported by the National Natural Science Foundation of China
文摘Soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy were studied as a function of cooling condition. The results show that higher permeability and relaxation frequency can be obtained by the two-step cooling method, and the pinning field of the sample obtained by this method is smaller than that of the furnace-cooled and water-quenched samples. This phenomenon was interpreted in terms of internal stress and the magnetic ordering of the residual amorphous phase. The two-step cooling treatment is an effective way to improve the soft magnetic properties of Fe82Mo7B10Cu1 nanocrystalline alloy.
基金supported by the Natural Science Foundation of China(No.21174114)the Ministry of Education Plan for Yangtze River Scholar and Innovation Team Development(No.IRT1177)+2 种基金Scientific and Technical Plan Project of Gansu Province(No. 1204GKCA006)the Natural Science Foundation of Gansu Province (No.1010RJZA024)Scientific and Technical Innovation Project of Northwest Normal University(No.nwnu-kjcxgc-03-63)
文摘ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.
文摘Metal clusters RCCo_3(CO)_9(R-H,C1,Br,CH_3,Ph) were prepared in 18.8-57.3% yields from the reaction of cobalt(Ⅱ)salt and RCX_a under mild PTC conditions(latm CO,25℃).The cobalt salt was reduced to Co(CO)_4 in the presence of Na_3S_2O_4.
基金the National Natural Science Foundation of China(Nos.12302007,12372006,and 12202109)the Specific Research Project of Guangxi for Research Bases and Talents(No.AD23026051)。
文摘Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore the dynamic behaviors of an FGM stepped beam with different boundary conditions based on an efficient solving method.Under the assumptions of the Euler-Bernoulli beam theory,the governing differential equations of an individual FGM beam are derived with Hamilton’s principle and decoupled via the separation-of-variable approach.Then,the free and forced vibrations of the FGM stepped beam are solved with the transfer matrix method(TMM).Two models,i.e.,a three-level FGM stepped beam and a five-level FGM stepped beam,are considered,and their natural frequencies and mode shapes are presented.To demonstrate the validity of the method in this paper,the simulation results by ABAQUS are also given.On this basis,the detailed parametric analyses on the frequencies and dynamic responses of the three-level FGM stepped beam are carried out.The results show the accuracy and efficiency of the TMM.
