The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail ...The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail inspection methods,specifically involving real-time,precise detection,and assessment of rail defects.Current applications fail to address the evolving requirements,prompting the need for advancements.This paper provides a summary of various types of rail defects and outlines both traditional and innovative non-destructive inspection techniques,examining their fundamental features,benefits,drawbacks,and practical suitability for railway track inspection.It also explores potential enhancements to equipment and software.The comprehensive review draws upon pertinent international research and review papers.Furthermore,the paper introduces a fusion of inspection methods aimed at enhancing the overall reliability of defect detection.展开更多
With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist i...With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.展开更多
Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the su...Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.展开更多
Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) io...Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) ion sources.With this in mind, to measure the emittance of the ion beams produced by the mVINIS ECR, which is part of the FAMA facility at the Vin?a Institute of Nuclear Sciences, we have developed a pepper-pot scintillator screen system combined with a CMOS camera. The application, developed on the Lab VIEW platform, allows us to control the camera's main attribute settings, such as the shutter speed and the gain, record the images in the region of interest, and process and filter the images in real time. To analyze the data from the obtained image, we have developed an algorithm called measurement and analysis of ion beam luminosity(MAIBL) to reconstruct the four-dimensional(4D) beam profile and calculate the root mean square(RMS) emittance. Before measuring emittance, we performed a simulated experiment using the pepper-pot simulation(PPS) program. An exported file(PPS) gives a numerically generated raw image(mock image) of a beam with a predefined emittance value after it has passed through a pepper-pot mask. By analyzing data from mock images instead of the image obtained by the camera and putting it into the MAIBL algorithm, we can compare the calculated emittance with PPS's initial emittance value. In this paper, we present our computational tools and explain the method for verifying the correctness of the calculated emittance values.展开更多
Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method br...Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.展开更多
Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent fe...Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.展开更多
A combined method for the fast 3-D finite element modeling of defect responses in nondestructive testing of electromagnetics is presented. The method consists of three numerical techniques: zoom-in technique, differen...A combined method for the fast 3-D finite element modeling of defect responses in nondestructive testing of electromagnetics is presented. The method consists of three numerical techniques: zoom-in technique, difference field technique and iterative solution technique. Utilizing the zoom-in technique, the computational zone focuses on a relatively small domain around the defect. Employing the difference field technique, the axisymmetrical field solution corresponding to the case with no defect can be used to simplify the mesh generation and obtain the modeling results quickly. Using the iterative solution technique, the matrix equation system in the 3-D finite element modeling of nondestructive probe signals can easily be solved. The sample calculation shows that the presented method is highly effective and can consequently save significant computer resources.展开更多
In order to achieve quick and accurate lifetime prediction of LED lighting products under the testing time of 2 000 h, a method of online testing of luminous flux is proposed under the condition of temperature stress....In order to achieve quick and accurate lifetime prediction of LED lighting products under the testing time of 2 000 h, a method of online testing of luminous flux is proposed under the condition of temperature stress.Exponential fitting of lumen maintenance, the Bayesian estimation of failure probability, the Weibull distribution of lifetime and the Arrhenius model of the decay rate are used in combination to acquire the distribution of failure probability over time at the ambient temperatures of 25 ℃. The lifetime test of the same lamps based on the Energy Star standard under the testing time of 6 000 h is also implemented to verify the effectiveness of the method. The errors of lifetimes acquired with the proposed method are 7%, 4%, 3% and 1% at the failure probabilities of 62. 3%, 10%, 5% and 1%,respectively.展开更多
This paper presents a method based on riblet surfaces. Its advantage lies in that it is more with testing methods using instruments such as a the Spalding formula for testing drag-reduction on convenient and yields mo...This paper presents a method based on riblet surfaces. Its advantage lies in that it is more with testing methods using instruments such as a the Spalding formula for testing drag-reduction on convenient and yields more precise data compared scale. With this method, data is obtained from the velocity distribution within the inner layer, nearest the riblet surface. Precision of measurement of the velocity distribution is the key factor affecting the precision of the testing.展开更多
A set-up based on a special shadow method, pinhole method, was made and some experiments were done. The results show that this novel method is simple, easy to operate,and suitable for testing large aspherical surfaces...A set-up based on a special shadow method, pinhole method, was made and some experiments were done. The results show that this novel method is simple, easy to operate,and suitable for testing large aspherical surfaces quantitatively.展开更多
In order to improve the efficiency of regression testing in web application,the control flow graph and the greedy algorithm are adopted.This paper considers a web page as a basic unit and introduces a test case select...In order to improve the efficiency of regression testing in web application,the control flow graph and the greedy algorithm are adopted.This paper considers a web page as a basic unit and introduces a test case selection method for web application regression testing based on the control flow graph.This method is safe enough to the test case selection.On the base of features of request sequence in web application,the minimization technique and the priority of test cases are taken into consideration in the process of execution of test cases in regression testing for web application.The improved greedy algorithm is also raised resulting in optimization of execution of test cases.The experiments indicate that the number of test cases which need to be retested is reduced,and the efficiency of execution of test cases is also improved.展开更多
For a homogeneous,continuous,and isotropic material whose constitutive relationships meets with the Ramberg-Osgood law(R-O law),the energy in the elastoplastic indentation with a ball indenter was theoretically analyz...For a homogeneous,continuous,and isotropic material whose constitutive relationships meets with the Ramberg-Osgood law(R-O law),the energy in the elastoplastic indentation with a ball indenter was theoretically analyzed,and the proportional superposition of energy in pure elasticity and pure plasticity during indentation was considered based on the equivalence of energy density.Subsequently,a Proportional Superposition-based Elasto Plastic Model(PS-EPM)was developed to describe the relationships between the displacement and the load during the ball indentation.Furthermore,a new test method of Ball Indentation based on Elastoplastic Proportional Superposition(BI-EPS)was developed to obtain the constitutive relationships of R-O law materials.The load–displacement curves predicted using the PS-EPM model were found to agree closely with the Finite Element Analysis(FEA)results.Moreover,the stress vs.strain curves predicted using the BI-EPS method were in better agreement with those obtained by FEA.Additionally,ball indentation was performed on eleven types of metal materials including five types of aluminum alloys and six types of steel.The test results showed that the stress vs.strain relationships and the tensile strength values predicted using the proposed BI-EPS method agreed well with the results obtained using conventional uniaxial tensile tests.展开更多
The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evalua...The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evaluating stability and designing supports in underground engineering.Currently,there are no effective testing methods for the characteristic parameters of the rock mass structural plane in underground engineering.The paper presents the digital drilling technology as a new testing method of rock mass structural planes.Flawed rock specimens with cracks of varying widths and angles were used to simulate the rock mass structural planes,and the multifunctional rock mass digital drilling test system was employed to carry out the digital drilling tests.The analysis focuses on the variation laws of drilling parameters,such as drilling pressure and drilling torque,affected by the characteristics of prefabricated cracks,and clarifies the degradation mechanism of rock equivalent compressive strength.Additionally,an identification model for the characteristic parameters of rock mass structural planes during drilling is established.The test results indicate that the average difference of the characteristics of prefabricated cracks identified by the equivalent compressive strength is 2.45°and 0.82 mm,respectively.The identification model while drilling is verified to be correct due to the high identification accuracy.Based on this,a method for testing the characteristic parameters of the surrounding rock structural plane while drilling is proposed.The research offers a theoretical and methodological foundation for precise in situ identification of structural planes of the surrounding rock in underground engineering.展开更多
Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformat...Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.展开更多
The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliab...The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliability. Based on the analysis of the characteristics of real-time embedded software, the formal method is introduced into the real-time embedded software testing field and the real-time extended finite state machine （RT-EFSM） model is studied firstly. Then, the time zone division method of real-time embedded system is presented and the definition and description methods of time-constrained transition equivalence class （timeCTEC） are presented. Furthermore, the approaches of the testing sequence and test case generation are put forward. Finally, the proposed method is applied to a typical avionics real- time embedded software testing practice and the examples of the timeCTEC, testing sequences and test cases are given. With the analysis of the testing result, the application verification shows that the proposed method can effectively describe the real-time embedded software state transition characteristics and real-time requirements and play the advantages of the formal methods in accuracy, effectiveness and the automation supporting. Combined with the testing platform, the real-time, closed loop and automated simulation testing for real-time embedded software can be realized effectively.展开更多
Hydropower projects are rapidly developing in China at present, and a number of high daras and large reservoirs are currently under construction or will soon be built. These large projects are mainly located on the gr...Hydropower projects are rapidly developing in China at present, and a number of high daras and large reservoirs are currently under construction or will soon be built. These large projects are mainly located on the great rivers in West China with complicated topographical and geological conditions. Evaluation of stability and safety of these high dam projects is an important topic. Geomechanical model test is one of the main methods to study the global stability of high dam and foundation. In this paper, a comprehensive testing method that combines overloading and strength reduction in a model is proposed. In this method, both the influence of excessive flooding and the effects of strength reduction of rock masses and weak structural planes on dam stability are considered. Thus, the comprehensive testing method can accurately incorporate multiple factors that affect the global stability of high dam and its foundation. Based on the failure testing principle and model similarity theory, a similarity relation formula for safety evaluation through comprehensive test is established. A new model material, temperature-dependent analogous material, is also developed. By rising the temperature and reducing the strength of the mod,~l material, the mechanical behaviors resulting from gradual strength reduction can be simulated. Thus, the comprehensive testing method is realized in a single model. For case studies, the comprehensive geomechanical model test is conducted for Jinpinlg I and Xiaowan high arch dam projects.展开更多
The emphasis of component system regression testing is retesting of the event interaction between updated components and other components in a system.A component system regression testing method based on a new compone...The emphasis of component system regression testing is retesting of the event interaction between updated components and other components in a system.A component system regression testing method based on a new component testing association model （CTAM） is proposed.First,the modification-affected component groups are identified by the impact analysis on CTAM,and each component in this group is assigned with an influence degree.Then,previous test cases are selected according to the influence degree,to generate the minimal regression test suite.Compared with traditional methods,CTAM is derived from the statistic on the interactive events that occurred in previous test executions,and focuses on the complicated relationship between components,which is more applicable to the component system regression testing.展开更多
Food safety is one of the major concerns in every country regardless of the economic and social development. The frequent occurrence of food scandals in the world has led the Chinese government to implement several st...Food safety is one of the major concerns in every country regardless of the economic and social development. The frequent occurrence of food scandals in the world has led the Chinese government to implement several strategies to fortify the food supply system to a high food safety standard. This relies heavily on laboratory testing services but conventional methods for detection of food contaminants and toxicants are limited by sophisticated sample preparation procedures, long analysis time, large instruments and professional personnel to meet the increasing demands. In this review, we have incorporated most of the current and potential rapid detection methods for many notorious food contaminants and toxicants including microbial agents, toxic ions, pesticides, veterinary drugs and preservatives, as well as detection of genetically modified food genes and adulterated edible oil. Development of rapid, accurate, easy-to-use and affordable testing methods could urge food handlers and the public to actively screen for food contaminants and toxicants instead of passively relying on monitoring by the government examination facility. This review also provides several recommendations including how to encourage the public to engage in the food safety management system and provide optimal education and financial assistance that may improve the current Chinese food safety control system.展开更多
For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar c...For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.展开更多
This paper is dedicated to applying the Fourier amplitude sensitivity test(FAST)method to the problem of mixed extension and inflation of a circular cylindrical tube in the presence of residual stresses.The metafuncti...This paper is dedicated to applying the Fourier amplitude sensitivity test(FAST)method to the problem of mixed extension and inflation of a circular cylindrical tube in the presence of residual stresses.The metafunctions and the Ishigami function are considered in the sensitivity analysis(SA).The effects of the input variables on the output variables are investigated,and the most important parameters of the system under the applied pressure and axial force such as the axial stretch and the azimuthal stretch are determined.展开更多
文摘The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail inspection methods,specifically involving real-time,precise detection,and assessment of rail defects.Current applications fail to address the evolving requirements,prompting the need for advancements.This paper provides a summary of various types of rail defects and outlines both traditional and innovative non-destructive inspection techniques,examining their fundamental features,benefits,drawbacks,and practical suitability for railway track inspection.It also explores potential enhancements to equipment and software.The comprehensive review draws upon pertinent international research and review papers.Furthermore,the paper introduces a fusion of inspection methods aimed at enhancing the overall reliability of defect detection.
基金supported by the“National Ocean Technology Center Innovation Fund”under Project No.N3220Z002,led by Ning Jia.The official website of the National Ocean Technology Center is accessible at:http://www.notcsoa.org.cn/.
文摘With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant No.42225206)National Natural Science Foundation of China(42207180,42477209,42302320).
文摘Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.
基金funded by the Ministry of Education, Science and Technological Development of the Republic of Serbia via the FAMA project (research topic “Physics and chemistry with ion beams”)。
文摘Without knowing the emittance value, it is difficult to optimize ion beam optics for minimum beam loss during transmission, especially considering the very high emittance values of electron cyclotron resonance(ECR) ion sources.With this in mind, to measure the emittance of the ion beams produced by the mVINIS ECR, which is part of the FAMA facility at the Vin?a Institute of Nuclear Sciences, we have developed a pepper-pot scintillator screen system combined with a CMOS camera. The application, developed on the Lab VIEW platform, allows us to control the camera's main attribute settings, such as the shutter speed and the gain, record the images in the region of interest, and process and filter the images in real time. To analyze the data from the obtained image, we have developed an algorithm called measurement and analysis of ion beam luminosity(MAIBL) to reconstruct the four-dimensional(4D) beam profile and calculate the root mean square(RMS) emittance. Before measuring emittance, we performed a simulated experiment using the pepper-pot simulation(PPS) program. An exported file(PPS) gives a numerically generated raw image(mock image) of a beam with a predefined emittance value after it has passed through a pepper-pot mask. By analyzing data from mock images instead of the image obtained by the camera and putting it into the MAIBL algorithm, we can compare the calculated emittance with PPS's initial emittance value. In this paper, we present our computational tools and explain the method for verifying the correctness of the calculated emittance values.
文摘Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.
文摘Method of testing for dynamic output forces from jet elements is studied, the handwidth is large in testing with this method. By establishing a model of the test system and simulating it, principles of how inherent features of the test system affect the dynamic force test are found out. Thus a theoretical foundation is given for the design and error modification to the actual test system.
文摘A combined method for the fast 3-D finite element modeling of defect responses in nondestructive testing of electromagnetics is presented. The method consists of three numerical techniques: zoom-in technique, difference field technique and iterative solution technique. Utilizing the zoom-in technique, the computational zone focuses on a relatively small domain around the defect. Employing the difference field technique, the axisymmetrical field solution corresponding to the case with no defect can be used to simplify the mesh generation and obtain the modeling results quickly. Using the iterative solution technique, the matrix equation system in the 3-D finite element modeling of nondestructive probe signals can easily be solved. The sample calculation shows that the presented method is highly effective and can consequently save significant computer resources.
基金The Cui Can Project of Chinese Academy of Sciences(No.KZCC-EW-102)the National High Technology Research and Development Program of China(863 Program)(No.2015AA03A101,2013AA03A116)
文摘In order to achieve quick and accurate lifetime prediction of LED lighting products under the testing time of 2 000 h, a method of online testing of luminous flux is proposed under the condition of temperature stress.Exponential fitting of lumen maintenance, the Bayesian estimation of failure probability, the Weibull distribution of lifetime and the Arrhenius model of the decay rate are used in combination to acquire the distribution of failure probability over time at the ambient temperatures of 25 ℃. The lifetime test of the same lamps based on the Energy Star standard under the testing time of 6 000 h is also implemented to verify the effectiveness of the method. The errors of lifetimes acquired with the proposed method are 7%, 4%, 3% and 1% at the failure probabilities of 62. 3%, 10%, 5% and 1%,respectively.
基金Supported by National Natural Science Foundation (50835009 and 10672136)Science and Technology Innovation Foundation of NWPU(2008KJ02012)
文摘This paper presents a method based on riblet surfaces. Its advantage lies in that it is more with testing methods using instruments such as a the Spalding formula for testing drag-reduction on convenient and yields more precise data compared scale. With this method, data is obtained from the velocity distribution within the inner layer, nearest the riblet surface. Precision of measurement of the velocity distribution is the key factor affecting the precision of the testing.
文摘A set-up based on a special shadow method, pinhole method, was made and some experiments were done. The results show that this novel method is simple, easy to operate,and suitable for testing large aspherical surfaces quantitatively.
基金The National Natural Science Foundation of China(No.60503020,60503033,60703086)Opening Foundation of Jiangsu Key Laboratory of Computer Information Processing Technology in Soochow University(No.KJS0714)
文摘In order to improve the efficiency of regression testing in web application,the control flow graph and the greedy algorithm are adopted.This paper considers a web page as a basic unit and introduces a test case selection method for web application regression testing based on the control flow graph.This method is safe enough to the test case selection.On the base of features of request sequence in web application,the minimization technique and the priority of test cases are taken into consideration in the process of execution of test cases in regression testing for web application.The improved greedy algorithm is also raised resulting in optimization of execution of test cases.The experiments indicate that the number of test cases which need to be retested is reduced,and the efficiency of execution of test cases is also improved.
基金co-supported by the National Natural Science Foundation of China(Nos.11872320 and 12072294)。
文摘For a homogeneous,continuous,and isotropic material whose constitutive relationships meets with the Ramberg-Osgood law(R-O law),the energy in the elastoplastic indentation with a ball indenter was theoretically analyzed,and the proportional superposition of energy in pure elasticity and pure plasticity during indentation was considered based on the equivalence of energy density.Subsequently,a Proportional Superposition-based Elasto Plastic Model(PS-EPM)was developed to describe the relationships between the displacement and the load during the ball indentation.Furthermore,a new test method of Ball Indentation based on Elastoplastic Proportional Superposition(BI-EPS)was developed to obtain the constitutive relationships of R-O law materials.The load–displacement curves predicted using the PS-EPM model were found to agree closely with the Finite Element Analysis(FEA)results.Moreover,the stress vs.strain curves predicted using the BI-EPS method were in better agreement with those obtained by FEA.Additionally,ball indentation was performed on eleven types of metal materials including five types of aluminum alloys and six types of steel.The test results showed that the stress vs.strain relationships and the tensile strength values predicted using the proposed BI-EPS method agreed well with the results obtained using conventional uniaxial tensile tests.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC2907600)the National Natural Science Foundation of China(Grant Nos.42277174 and 52204260).
文摘The rock mass consists of rock blocks and structural planes,which can reduce its integrity and strength.Therefore,accurately obtaining the characteristics of the rock mass structural plane is a prerequisite for evaluating stability and designing supports in underground engineering.Currently,there are no effective testing methods for the characteristic parameters of the rock mass structural plane in underground engineering.The paper presents the digital drilling technology as a new testing method of rock mass structural planes.Flawed rock specimens with cracks of varying widths and angles were used to simulate the rock mass structural planes,and the multifunctional rock mass digital drilling test system was employed to carry out the digital drilling tests.The analysis focuses on the variation laws of drilling parameters,such as drilling pressure and drilling torque,affected by the characteristics of prefabricated cracks,and clarifies the degradation mechanism of rock equivalent compressive strength.Additionally,an identification model for the characteristic parameters of rock mass structural planes during drilling is established.The test results indicate that the average difference of the characteristics of prefabricated cracks identified by the equivalent compressive strength is 2.45°and 0.82 mm,respectively.The identification model while drilling is verified to be correct due to the high identification accuracy.Based on this,a method for testing the characteristic parameters of the surrounding rock structural plane while drilling is proposed.The research offers a theoretical and methodological foundation for precise in situ identification of structural planes of the surrounding rock in underground engineering.
基金supported by the Implementation Programs for Marine Renewable Energy Special Funds (GHME2012ZC02)
文摘Actual sea condition testing and inspection and evaluation method research are carried out for tidal energy devices to provide scientific and effective technical support for the ocean high-tech achievement transformation and marine renewable energy development. By analyzing three core indicators, including the power output characteristics of the tidal current device, the generating capacity, energy conversion efficiency, proposed the test contents and evaluation methods of indicators are proposed in this paper; and based on the research of wind farms, power quality testing and assessment methods of offshore tidal energy device are proposed; given the security access to the test contents of tidal current energy device, tidal current energy device running conditions in the testing ground are comprehensively assessed.
基金supported by the Aviation Science Foundation of China
文摘The reliability of real-time embedded software directly determines the reliability of the whole real-time embedded sys- tem, and the effective software testing is an important way to ensure software quality and reliability. Based on the analysis of the characteristics of real-time embedded software, the formal method is introduced into the real-time embedded software testing field and the real-time extended finite state machine （RT-EFSM） model is studied firstly. Then, the time zone division method of real-time embedded system is presented and the definition and description methods of time-constrained transition equivalence class （timeCTEC） are presented. Furthermore, the approaches of the testing sequence and test case generation are put forward. Finally, the proposed method is applied to a typical avionics real- time embedded software testing practice and the examples of the timeCTEC, testing sequences and test cases are given. With the analysis of the testing result, the application verification shows that the proposed method can effectively describe the real-time embedded software state transition characteristics and real-time requirements and play the advantages of the formal methods in accuracy, effectiveness and the automation supporting. Combined with the testing platform, the real-time, closed loop and automated simulation testing for real-time embedded software can be realized effectively.
基金Supported by the National Natural Science Foundation of China (51109152)the National Basic Research Program of China (973 Program) (2010CB226802)the Doctoral Programs Foundation of the Ministry of Education of China (20100181110077)
文摘Hydropower projects are rapidly developing in China at present, and a number of high daras and large reservoirs are currently under construction or will soon be built. These large projects are mainly located on the great rivers in West China with complicated topographical and geological conditions. Evaluation of stability and safety of these high dam projects is an important topic. Geomechanical model test is one of the main methods to study the global stability of high dam and foundation. In this paper, a comprehensive testing method that combines overloading and strength reduction in a model is proposed. In this method, both the influence of excessive flooding and the effects of strength reduction of rock masses and weak structural planes on dam stability are considered. Thus, the comprehensive testing method can accurately incorporate multiple factors that affect the global stability of high dam and its foundation. Based on the failure testing principle and model similarity theory, a similarity relation formula for safety evaluation through comprehensive test is established. A new model material, temperature-dependent analogous material, is also developed. By rising the temperature and reducing the strength of the mod,~l material, the mechanical behaviors resulting from gradual strength reduction can be simulated. Thus, the comprehensive testing method is realized in a single model. For case studies, the comprehensive geomechanical model test is conducted for Jinpinlg I and Xiaowan high arch dam projects.
基金The National Natural Science Foundation of China(No.60373066,60403016,60425206) the National Basic Research Pro-gram of China (973 Program)(No.2002CB312000)+1 种基金Specialized ResearchFund for the Doctoral Program of Higher Education (No.20020286004)the Natural Science Foundation of Jiangsu Province (No.BK2005060).
文摘The emphasis of component system regression testing is retesting of the event interaction between updated components and other components in a system.A component system regression testing method based on a new component testing association model （CTAM） is proposed.First,the modification-affected component groups are identified by the impact analysis on CTAM,and each component in this group is assigned with an influence degree.Then,previous test cases are selected according to the influence degree,to generate the minimal regression test suite.Compared with traditional methods,CTAM is derived from the statistic on the interactive events that occurred in previous test executions,and focuses on the complicated relationship between components,which is more applicable to the component system regression testing.
文摘Food safety is one of the major concerns in every country regardless of the economic and social development. The frequent occurrence of food scandals in the world has led the Chinese government to implement several strategies to fortify the food supply system to a high food safety standard. This relies heavily on laboratory testing services but conventional methods for detection of food contaminants and toxicants are limited by sophisticated sample preparation procedures, long analysis time, large instruments and professional personnel to meet the increasing demands. In this review, we have incorporated most of the current and potential rapid detection methods for many notorious food contaminants and toxicants including microbial agents, toxic ions, pesticides, veterinary drugs and preservatives, as well as detection of genetically modified food genes and adulterated edible oil. Development of rapid, accurate, easy-to-use and affordable testing methods could urge food handlers and the public to actively screen for food contaminants and toxicants instead of passively relying on monitoring by the government examination facility. This review also provides several recommendations including how to encourage the public to engage in the food safety management system and provide optimal education and financial assistance that may improve the current Chinese food safety control system.
基金supported by the Central University Basic Research Professional Expenses Special Foundation of Harbin Engineering University (Grant No. HEUCFL10101109)
文摘For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.
文摘This paper is dedicated to applying the Fourier amplitude sensitivity test(FAST)method to the problem of mixed extension and inflation of a circular cylindrical tube in the presence of residual stresses.The metafunctions and the Ishigami function are considered in the sensitivity analysis(SA).The effects of the input variables on the output variables are investigated,and the most important parameters of the system under the applied pressure and axial force such as the axial stretch and the azimuthal stretch are determined.
