Acoustic emission test and CT scanning are important techniques in the study of coal crack propagation. A uniaxial compression test was performed on coal samples by integrating CT and acoustic emission. The test compa...Acoustic emission test and CT scanning are important techniques in the study of coal crack propagation. A uniaxial compression test was performed on coal samples by integrating CT and acoustic emission. The test comparison analyzes the acoustic emission load and CT images for an effective observation on the entire process, from crack propagation to the samples＇ destruction. The box dimension of the coal samples＇ acoustic emission series and the CT images were obtained through calculations by using the authors＇ own program. The results show that the fractal dimension of both the acoustic emission energy and CT image increase rapidly, indicating coal and rock mass has entered a dangerous condition. Hence, measures should be taken to unload the pressure of the coal and rock mass. The test results provide intuitive observation data for the coal meso-damage model. The test contributes to in-depth studies of coal or rock crack propagation mechanisms and provides a theoretical basis for rock burst mechanism.展开更多
With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal w...With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.展开更多
[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the op...[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the optimal extraction process of Prunellae Spica compound was chosen by using the yield of dry paste and ursolic acid content as evaluation indicators. [Results]The optimal extraction process of Prunellae Spica compound is as follows: solvent dosage was 16 times,and extraction frequency was 3 times,while extraction time was 1 h.[Conclusions]The extraction process of Prunellae Spica compound was stable and feasible,and this study can provide a theoretical basis for further preparation of the compound.展开更多
In this paper, we present the implementation of a built-in current sensor (BICS) which takes into account the increased background current of defect-free circuits and the effects of process variation on ΔIDDQ testing...In this paper, we present the implementation of a built-in current sensor (BICS) which takes into account the increased background current of defect-free circuits and the effects of process variation on ΔIDDQ testing of CMOS data converters. A 12-bit digital-to-analog converter (DAC) is designed as the circuit under test (CUT). The BICS uses frequency as the output for fault detection in CUT. A fault is detected if it causes the output frequency to deviate more than ±10% from the reference frequency. The output frequencies of the BICS for various (MOSIS) model parameters are simulated to check for the effect of process variation on the frequency deviation. A set of eight faults simulating manufacturing defects in CMOS data converters are injected using fault-injection transistors and tested successfully.展开更多
To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concret...To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concrete T-beams,destructive tests were conducted on full-scale pre-stressed concrete beams.Based on the measurement and ana-lysis of beam deflection,strain,and crack development under various loading levels during the research tests,combined with the verification coefficient indicators specified in the codes,the verification coefficients of bridges at different stages of damage can be examined.The results indicate that the T-beams experience complete,incom-plete linear,and non-linear stages during the destructive test process.In the complete linear elastic stage,both the deflection and bottom strain verification coefficients comply with the specifications,indicating a good structural load-bearing capacity no longer adheres to the code’s requirements.In the non-linear stage,both coefficients exhi-bit a sharp increase,resulting in a further decrease in the structure’s load-bearing capacity.According to the pro-visions of the current code,the beam can be in the incomplete linear stage when both values fall within the code’s specified range.The strain verification coefficient sourced from the compression zone at the bottom of theflange is not recommended for assessing the bridge’s load-bearing capacity.展开更多
We propose a software reliability growth model with testing-effort based on a continuous-state space stochastic process, such as a lognormal process, and conduct its goodness-of-fit evaluation. We also discuss a param...We propose a software reliability growth model with testing-effort based on a continuous-state space stochastic process, such as a lognormal process, and conduct its goodness-of-fit evaluation. We also discuss a parameter estimation method of our model. Then, we derive several software reliability assessment measures by the probability distribution of its solution process, and compare our model with existing continuous-state space software reliability growth models in terms of the mean square error and the Akaike’s information criterion by using actual fault count data.展开更多
In this article, we study the Kolmogorov-Smirnov type goodness-of-fit test for the inhomogeneous Poisson process with the unknown translation parameter as multidimensional parameter. The basic hypothesis and the alter...In this article, we study the Kolmogorov-Smirnov type goodness-of-fit test for the inhomogeneous Poisson process with the unknown translation parameter as multidimensional parameter. The basic hypothesis and the alternative are composite and carry to the intensity measure of inhomogeneous Poisson process and the intensity function is regular. For this model of shift parameter, we propose test which is asymptotically partially distribution free and consistent. We show that under null hypothesis the limit distribution of this statistic does not depend on unknown parameter.展开更多
高速铁路轮轨系统在服役过程中产生的疲劳裂纹是威胁行车安全的重大隐患。传统的无损检测方法难以有效识别处于闭合或半闭合状态的早期微小裂纹,尤其是在列车运行载荷作用下的动态工况。针对这一挑战,本文提出并系统研究了一种基于涡流...高速铁路轮轨系统在服役过程中产生的疲劳裂纹是威胁行车安全的重大隐患。传统的无损检测方法难以有效识别处于闭合或半闭合状态的早期微小裂纹,尤其是在列车运行载荷作用下的动态工况。针对这一挑战,本文提出并系统研究了一种基于涡流脉冲热成像(Eddy Current Pulsed Thermography,ECPT)技术的轮轨疲劳裂纹检测方法。研究首先构建了负载作用下的非稳态疲劳裂纹多物理场模型,通过有限元仿真与实验相结合,深入探究了局部接触(闭合)裂纹的涡流-热响应机理,并揭示了裂纹闭合深度与表面温度场特征(如等温线内凹现象)之间的定量关系。在此基础上,自主研制了适用于车轮与钢轨的动态ECPT检测平台及专用磁轭传感器,并开展了高铁轮轨实物的动态检测试验。结果表明,所提方法不仅能有效区分开口与闭合裂纹,还能对不同深度、不同尺寸的疲劳裂纹进行可靠检出,检出深度范围可达0.35mm至5mm。结合主成分分析(PCA)与张量分解等图像增强算法,显著提升了缺陷的信噪比与可视化效果,为高铁轮轨疲劳裂纹的在线、高效、精准检测提供了重要的理论依据与技术支撑。展开更多
Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tr...Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tracked on-line by building a time-varying parameter model, and then the relevant parameter spectrum can be obtained. The feasibility and advantages of the method are examined by digital simulation. The results of FTPVS at low-speed wind-tunnel promise the engineering application perspective of the method.展开更多
Because of the inevitable debugging lag,imperfect debugging process is used to replace perfect debugging process in the analysis of software reliability growth model.Considering neither testing-effort nor testing cove...Because of the inevitable debugging lag,imperfect debugging process is used to replace perfect debugging process in the analysis of software reliability growth model.Considering neither testing-effort nor testing coverage can describe software reliability for imperfect debugging completely,by hybridizing testing-effort with testing coverage under imperfect debugging,this paper proposes a new model named GMW-LO-ID.Under the assumption that the number of faults is proportional to the current number of detected faults,this model combines generalized modified Weibull(GMW)testing-effort function with logistic(LO)testing coverage function,and inherits GMW's amazing flexibility and LO's high fitting precision.Furthermore,the fitting accuracy and predictive power are verified by two series of experiments and we can draw a conclusion that our model fits the actual failure data better and predicts the software future behavior better than other ten traditional models,which only consider one or two points of testing-effort,testing coverage and imperfect debugging.展开更多
文摘Acoustic emission test and CT scanning are important techniques in the study of coal crack propagation. A uniaxial compression test was performed on coal samples by integrating CT and acoustic emission. The test comparison analyzes the acoustic emission load and CT images for an effective observation on the entire process, from crack propagation to the samples＇ destruction. The box dimension of the coal samples＇ acoustic emission series and the CT images were obtained through calculations by using the authors＇ own program. The results show that the fractal dimension of both the acoustic emission energy and CT image increase rapidly, indicating coal and rock mass has entered a dangerous condition. Hence, measures should be taken to unload the pressure of the coal and rock mass. The test results provide intuitive observation data for the coal meso-damage model. The test contributes to in-depth studies of coal or rock crack propagation mechanisms and provides a theoretical basis for rock burst mechanism.
基金Supported by Guiyang Science and Technology Planning Project(ZKHT[2017-4]21)
文摘With quercetin content and yield of dry extract as investigation indices, three factors, amount of water added, decoction time and decoction times were investigated by an orthogonal test, so as to select the optimal water extraction process for Zihua Qinghuo Capsule. The determined extraction process was adding 8 times of water in five herbs including Viola philippica and decocting for 2 times, 1.5 h each time. Pilot scale test demonstrated that the selected process is stable and feasible, and could provide reliable reference for practical production.
基金Supported by Talent Training and Construction Project of Professor Yang Shilin’s Team in 2017(YSL17010)
文摘[Objectives] The study aimed to optimize the extraction process of Prunellae Spica compound to provide an experimental basis for the development and utilization of the compound. [Methods]Through orthogonal test,the optimal extraction process of Prunellae Spica compound was chosen by using the yield of dry paste and ursolic acid content as evaluation indicators. [Results]The optimal extraction process of Prunellae Spica compound is as follows: solvent dosage was 16 times,and extraction frequency was 3 times,while extraction time was 1 h.[Conclusions]The extraction process of Prunellae Spica compound was stable and feasible,and this study can provide a theoretical basis for further preparation of the compound.
文摘In this paper, we present the implementation of a built-in current sensor (BICS) which takes into account the increased background current of defect-free circuits and the effects of process variation on ΔIDDQ testing of CMOS data converters. A 12-bit digital-to-analog converter (DAC) is designed as the circuit under test (CUT). The BICS uses frequency as the output for fault detection in CUT. A fault is detected if it causes the output frequency to deviate more than ±10% from the reference frequency. The output frequencies of the BICS for various (MOSIS) model parameters are simulated to check for the effect of process variation on the frequency deviation. A set of eight faults simulating manufacturing defects in CMOS data converters are injected using fault-injection transistors and tested successfully.
文摘To investigate the evolution of load-bearing characteristics of pre-stressed beams throughout their service life and to provide a basis for accurately assessing the actual working state of damaged pre-stressed concrete T-beams,destructive tests were conducted on full-scale pre-stressed concrete beams.Based on the measurement and ana-lysis of beam deflection,strain,and crack development under various loading levels during the research tests,combined with the verification coefficient indicators specified in the codes,the verification coefficients of bridges at different stages of damage can be examined.The results indicate that the T-beams experience complete,incom-plete linear,and non-linear stages during the destructive test process.In the complete linear elastic stage,both the deflection and bottom strain verification coefficients comply with the specifications,indicating a good structural load-bearing capacity no longer adheres to the code’s requirements.In the non-linear stage,both coefficients exhi-bit a sharp increase,resulting in a further decrease in the structure’s load-bearing capacity.According to the pro-visions of the current code,the beam can be in the incomplete linear stage when both values fall within the code’s specified range.The strain verification coefficient sourced from the compression zone at the bottom of theflange is not recommended for assessing the bridge’s load-bearing capacity.
文摘We propose a software reliability growth model with testing-effort based on a continuous-state space stochastic process, such as a lognormal process, and conduct its goodness-of-fit evaluation. We also discuss a parameter estimation method of our model. Then, we derive several software reliability assessment measures by the probability distribution of its solution process, and compare our model with existing continuous-state space software reliability growth models in terms of the mean square error and the Akaike’s information criterion by using actual fault count data.
文摘In this article, we study the Kolmogorov-Smirnov type goodness-of-fit test for the inhomogeneous Poisson process with the unknown translation parameter as multidimensional parameter. The basic hypothesis and the alternative are composite and carry to the intensity measure of inhomogeneous Poisson process and the intensity function is regular. For this model of shift parameter, we propose test which is asymptotically partially distribution free and consistent. We show that under null hypothesis the limit distribution of this statistic does not depend on unknown parameter.
文摘高速铁路轮轨系统在服役过程中产生的疲劳裂纹是威胁行车安全的重大隐患。传统的无损检测方法难以有效识别处于闭合或半闭合状态的早期微小裂纹,尤其是在列车运行载荷作用下的动态工况。针对这一挑战,本文提出并系统研究了一种基于涡流脉冲热成像(Eddy Current Pulsed Thermography,ECPT)技术的轮轨疲劳裂纹检测方法。研究首先构建了负载作用下的非稳态疲劳裂纹多物理场模型,通过有限元仿真与实验相结合,深入探究了局部接触(闭合)裂纹的涡流-热响应机理,并揭示了裂纹闭合深度与表面温度场特征(如等温线内凹现象)之间的定量关系。在此基础上,自主研制了适用于车轮与钢轨的动态ECPT检测平台及专用磁轭传感器,并开展了高铁轮轨实物的动态检测试验。结果表明,所提方法不仅能有效区分开口与闭合裂纹,还能对不同深度、不同尺寸的疲劳裂纹进行可靠检出,检出深度范围可达0.35mm至5mm。结合主成分分析(PCA)与张量分解等图像增强算法,显著提升了缺陷的信噪比与可视化效果,为高铁轮轨疲劳裂纹的在线、高效、精准检测提供了重要的理论依据与技术支撑。
文摘Focused on the non-statlonarity and real-time analysis of signal in flutter test with progression variable speed （FTPVS）, a new method of recursive time-frequency analysis is presented. The time-varying system is tracked on-line by building a time-varying parameter model, and then the relevant parameter spectrum can be obtained. The feasibility and advantages of the method are examined by digital simulation. The results of FTPVS at low-speed wind-tunnel promise the engineering application perspective of the method.
基金supported by the National Natural Science Foundation of China(No.U1433116)the Aviation Science Foundation of China(No.20145752033)
文摘Because of the inevitable debugging lag,imperfect debugging process is used to replace perfect debugging process in the analysis of software reliability growth model.Considering neither testing-effort nor testing coverage can describe software reliability for imperfect debugging completely,by hybridizing testing-effort with testing coverage under imperfect debugging,this paper proposes a new model named GMW-LO-ID.Under the assumption that the number of faults is proportional to the current number of detected faults,this model combines generalized modified Weibull(GMW)testing-effort function with logistic(LO)testing coverage function,and inherits GMW's amazing flexibility and LO's high fitting precision.Furthermore,the fitting accuracy and predictive power are verified by two series of experiments and we can draw a conclusion that our model fits the actual failure data better and predicts the software future behavior better than other ten traditional models,which only consider one or two points of testing-effort,testing coverage and imperfect debugging.
