The unique advantage of x-ray ghost imaging(XGI)is its potential in low dose radiology.One of the practical ways to reduce the radiation exposure is to reduce the measurements while remaining sufficient image quality....The unique advantage of x-ray ghost imaging(XGI)is its potential in low dose radiology.One of the practical ways to reduce the radiation exposure is to reduce the measurements while remaining sufficient image quality.Synthetic aperture x-ray ghost imaging(SAXGI)is invented to achieve megapixel XGI with limited measurements,which is expected to implement XGI simultaneously with large field of view and low radiation exposure.In this paper,we experimentally investigate the effect of measurements reduction on the spatial resolution and image quality of SAXGI with standard sample and biomedical specimen.The results with a resolution chart demonstrated that at 360 measurements,SAXGI successfully retrieved the sample image of 1960×1960 pixels with spatial resolution of 4μm.With measurement reduction,the spatial resolution deteriorates but the sparser structures are still discernable.Even with measurements reduced to 10,a spatial resolution of 10μm can still be achieved by SAXGI.A biomedical sample of a fish specimen is employed to evaluate the method and the fish image of 2000×1000 pixels with an SSIM of 0.962 is reconstructed by SAXGI with 770measurements,corresponding to an accumulative exposure reduction of more than 2 times.With the measurements reduced to 10 which corresponds to 1/160 of the accumulative radiation exposure for conventional radiology,bulky structure like the fish skeleton can still be definitely discerned and the SSIM for the reconstructed image still retained 0.9179.Results of this paper demonstrate that measurements reduction is practicable for the radiation exposure reduction of the sample,which implicates that SAXGI with limited measurements is an efficient solution for low dose radiology.展开更多
With appropriate geometry configuration, helicopter- borne rotating synthetic aperture radar （ROSAR） can break through the limitations of monostatic synthetic aperture radar （SAR） on forward-looking imaging. With ...With appropriate geometry configuration, helicopter- borne rotating synthetic aperture radar （ROSAR） can break through the limitations of monostatic synthetic aperture radar （SAR） on forward-looking imaging. With this capability, ROSAR has extensive potential applications, such as self-navigation and self-landing. Moreover, it has many advantages if combined with the frequency modulated continuous wave （FMCW） technology. A novel geometric configuration and an imaging algorithm for helicopter-borne FMCW-ROSAR are proposed. Firstly, by per- forming the equivalent phase center principle, the separated trans- mitting and receiving antenna system is equalized to the case of system configuration with antenna for both transmitting and receiving signals. Based on this, the accurate two-dimensional spectrum is obtained and the Doppler frequency shift effect in- duced by the continuous motion of the platform during the long pulse duration is compensated. Next, the impacts of the velocity approximation error on the imaging algorithm are analyzed in de- tail, and the system parameters selection and resolution analysis are presented. The well-focused SAR image is then obtained by using the improved Omega-K algorithm incorporating the accurate compensation method for the velocity approximation error. FJnally, correctness of the analysis and effectiveness of the proposed al- gorithm are demonstrated through simulation results.展开更多
To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar（BiSAR）,an improved chirp scaling algorithm（CSA） is proposed.Since velocity vector of the moving aircrafts in the para...To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar（BiSAR）,an improved chirp scaling algorithm（CSA） is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.展开更多
Compositional data, such as relative information, is a crucial aspect of machine learning and other related fields. It is typically recorded as closed data or sums to a constant, like 100%. The statistical linear mode...Compositional data, such as relative information, is a crucial aspect of machine learning and other related fields. It is typically recorded as closed data or sums to a constant, like 100%. The statistical linear model is the most used technique for identifying hidden relationships between underlying random variables of interest. However, data quality is a significant challenge in machine learning, especially when missing data is present. The linear regression model is a commonly used statistical modeling technique used in various applications to find relationships between variables of interest. When estimating linear regression parameters which are useful for things like future prediction and partial effects analysis of independent variables, maximum likelihood estimation (MLE) is the method of choice. However, many datasets contain missing observations, which can lead to costly and time-consuming data recovery. To address this issue, the expectation-maximization (EM) algorithm has been suggested as a solution for situations including missing data. The EM algorithm repeatedly finds the best estimates of parameters in statistical models that depend on variables or data that have not been observed. This is called maximum likelihood or maximum a posteriori (MAP). Using the present estimate as input, the expectation (E) step constructs a log-likelihood function. Finding the parameters that maximize the anticipated log-likelihood, as determined in the E step, is the job of the maximization (M) phase. This study looked at how well the EM algorithm worked on a made-up compositional dataset with missing observations. It used both the robust least square version and ordinary least square regression techniques. The efficacy of the EM algorithm was compared with two alternative imputation techniques, k-Nearest Neighbor (k-NN) and mean imputation (), in terms of Aitchison distances and covariance.展开更多
Frequency-Modulation Continuous-Wave Synthetic Aperture Radar(FMCW SAR)has shown great potential in the applications of civil and military fields because of its easy deployment and low cost.However,most of these work ...Frequency-Modulation Continuous-Wave Synthetic Aperture Radar(FMCW SAR)has shown great potential in the applications of civil and military fields because of its easy deployment and low cost.However,most of these work and analysis are concentrated on airborne FMCW SAR,where the characteristics of the imaging geometry and signal are much similar to that of traditional pulsed-SAR.As a result,a series of test campaigns of automobile-based FMCW SAR were sponsored by Institute of Electronics,Chinese Academy of Sciences(IECAS)in the autumn of 2012.In this paper,we analyze the imaging issues of FMCW SAR in automobile mode(named as near range mode),where a vehicle is used as moving platform and a large looking angle is configured.The imaging geometry and signal properties are analyzed in detail.We emphasize the difference of the near range mode from the traditional airborne SAR mode.Based on the analysis,a focusing approach is proposed in the paper to handle the data focusing in the case.Simulation experiment and real data of automobile FMCW SAR are used to validate the analysis.展开更多
A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error...A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error of the original object from the recorded image. The aperture configuration is a function of the maximum frequency of interest, and takes into account the diameter of the aperture. The simulative results of genetic algorithms illustrate the usefulness of this model lot designing a synthetic aperture optical imaging system, and the aperture configuration of a good synthetic aperture optical imaging system should be non-redundant.展开更多
In this paper,a focusing approach is presented to widen the use of efficient monostatic imaging algorithms for azimuth-invariant bistatic synthetic aperture radar(SAR) data.The bistatic range history is modeled by a p...In this paper,a focusing approach is presented to widen the use of efficient monostatic imaging algorithms for azimuth-invariant bistatic synthetic aperture radar(SAR) data.The bistatic range history is modeled by a polynomial of azimuth time.Using this model,an analytic form of the signal spectrum in the 2D frequency domain is derived,and a simple single-valued relation between the transmitter and receive ranges is established.In this way,a lot of monostatic image formation algorithms can be extended for the bistatic SAR data,and a bistatic chirp scaling algorithm is developed as an application of the new approach.This algorithm can be used to process the azimuth-invariant bistatic configuration where the transmitter and receiver platforms are moving on parallel tracks with the same velocity.In addition,some simulation results are given to demonstrate the validity of the proposed approach.展开更多
In order to meet the requirement of network synthesis optimization design for a micro component, a three-level information frame and functional module based on web was proposed. Firstly, the finite element method （FE...In order to meet the requirement of network synthesis optimization design for a micro component, a three-level information frame and functional module based on web was proposed. Firstly, the finite element method （FEM） was used to analyze the dynamic property of coupled-energy-domain of virtual prototype instances and to obtain some optimal information data. Secondly, the rough set theory （RST） and the genetic algorithm （GA） were used to work out the reduction of attributes and the acquisition of principle of optimality and to confirm key variable and restriction condition in the synthesis optimization design. Finally, the regression analysis （RA） and GA were used to establish the synthesis optimization design model and carry on the optimization design. A corresponding prototype system was also developed and the synthesis optimization design of a thermal actuated micro-pump was carded out as a demonstration in this paper.展开更多
One-dimensional synthetic aperture microwave radiometers have higher spatial resolution and record measurements at multiple incidence angles.In this paper,we propose a multiple linear regression method to retrieve sea...One-dimensional synthetic aperture microwave radiometers have higher spatial resolution and record measurements at multiple incidence angles.In this paper,we propose a multiple linear regression method to retrieve sea surface wind speed at an incidence angle between 0°65°.We assume that a one-dimensional synthetic aperture microwave radiometer operates at frequencies of 6.9,10.65,18.7,23.8 and 36.5 GHz.Then,the microwave radiative transfer forward model is used to simulate the measured brightness temperatures.The sensitivity of the brightness temperatures at 0°65°to the sea surface wind speed is calculated.Then,vertical polarization channels(VR),horizontal polarization channels(HR)and all channels(AR)are used to retrieve the sea surface wind speed via a multiple linear regression algorithm at 0°65°,and the relationship between the retrieval error and incidence angle is obtained.The results are as follows:(1)The sensitivity of the vertical polarization brightness temperature to the sea surface wind speed is smaller than that of the horizontal polarization.(2)The retrieval error increases with Gaussian noise.The retrieval error of VR first increases and then decreases with increasing incidence angle,the retrieval error of HR gradually decreases with increasing incidence angle,and the retrieval error of AR first decreases and then increases with increasing incidence angle.(3)The retrieval error of AR is the lowest and it is necessary to retrieve the sea surface wind speed at a larger incidence angle for AR.展开更多
Aiming at parallel distributed constant false alarm rate （CFAR） detection employing K/N fusion rule,an optimization algorithm based on the genetic algorithm with interval encoding is proposed. N-1 local probabilitie...Aiming at parallel distributed constant false alarm rate （CFAR） detection employing K/N fusion rule,an optimization algorithm based on the genetic algorithm with interval encoding is proposed. N-1 local probabilities of false alarm are selected as optimization variables. And the encoding intervals for local false alarm probabilities are sequentially designed by the person-by-person optimization technique according to the constraints. By turning constrained optimization to unconstrained optimization,the problem of increasing iteration times due to the punishment technique frequently adopted in the genetic algorithm is thus overcome. Then this optimization scheme is applied to spacebased synthetic aperture radar （SAR） multi-angle collaborative detection,in which the nominal factor for each local detector is determined. The scheme is verified with simulations of cases including two,three and four independent SAR systems. Besides,detection performances with varying K and N are compared and analyzed.展开更多
Accurate identification of water sources is crucial for effective water management and safety in mining operations.However,imbalanced water sample datasets often lead to suboptimal classification accuracy.To address t...Accurate identification of water sources is crucial for effective water management and safety in mining operations.However,imbalanced water sample datasets often lead to suboptimal classification accuracy.To address this challenge,this study proposes a novel water source identification method integrating Synthetic Minority Over-Sampling Technique(SMOTE),Zebra Optimization Algorithm(ZOA),and Light Gradient Boosting Machine(LightGBM).Initially,SMOTE is utilized to synthesize samples for the minority class within the imbalanced dataset,thereby generating a balanced water sample dataset and mitigating class distribution disparities.Subsequently,an efficient water source identification model is constructed by combining ZOA with LightGBM,leveraging the strengths of both algorithms.The model’s performance is validated using a test set and compared with other common classification models.Results demonstrate that SMOTE significantly alleviates class imbalance and enhances the classification accuracy of LightGBM for minority class water samples.ZOA parameter tuning accelerates model convergence and further improves classification accuracy,optimizing the model’s overall performance.In experimental validation,the proposed SMOTE-ZOA-LightGBM model achieved an accuracy of 88.41%and a F1 score of 88.24%,outperforming six other classification models.The method proposed in this paper can accurately identify water source types,effectively addressing the issue of low classification accuracy caused by imbalanced water sample data.It provides reliable technical support and scientific basis for identifying and preventing water inrush sources in mines.展开更多
An improved circular synthetic aperture radar（CSAR） imaging algorithm of omega-k（ω-k） type mainly for reconstructing an image on a cylindrical surface is proposed.In the typical CSAR ω-k algorithm,the rage traje...An improved circular synthetic aperture radar（CSAR） imaging algorithm of omega-k（ω-k） type mainly for reconstructing an image on a cylindrical surface is proposed.In the typical CSAR ω-k algorithm,the rage trajectory is approximated by Taylor series expansion to the quadratic terms,which limits the valid synthetic aperture length and the angular reconstruction range severely.Based on the model of the CSAR echo signal,the proposed algorithm directly transforms the signal to the two-dimensional（2D） wavenumber domain,not using approximation processing to the range trajectory.Based on form of the signal spectrum in the wavenumber domain,the formula for the wavenumber domain interpolation of the w-k algorithm is deduced,and the wavenumber spectrum of the reference point used for bulk compression is obtained from numerical method.The improved CSAR ω-k imaging algorithm increases the valid synthetic aperture length and the angular area greatly and hence improves the angular resolution of the cylindrical imaging.Additionally,the proposed algorithm can be repeated on different cylindrical surfaces to achieve three dimensional（3D） image reconstruction.The 3D spatial resolution of the CSAR system is discussed,and the simulation results validate the correctness of the analysis and the feasibility of the algorithm.展开更多
Among Synthetic Aperture Radar(SAR)image formation algorithms,the chirp scaling algorithm(CSA)is computationally highly efficient and has been practically used.In this paper,how to implement the subaperture extended C...Among Synthetic Aperture Radar(SAR)image formation algorithms,the chirp scaling algorithm(CSA)is computationally highly efficient and has been practically used.In this paper,how to implement the subaperture extended CSA in a high resolution spotlight mode SAR is studied in detail.The procedures such as subaperture processing and azimuth processing are discussed.According to the problems presented when using the method(A.Moreira,et al,1996)to process spotlight SAR data,full formula expressions suitable for high squinted angles is presented.While point target simulation is analyzed,the method is validated by E SAR raw data.The results can be directly implemented in the design of SAR processors.展开更多
Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gra...Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.展开更多
The traditional Range Doppler(RD)algorithm is unable to meet practical needs owing to the limit of resolution.The order of fractional Fourier Transform(FrFT)and the length of sampling signals affect SAR imaging perfor...The traditional Range Doppler(RD)algorithm is unable to meet practical needs owing to the limit of resolution.The order of fractional Fourier Transform(FrFT)and the length of sampling signals affect SAR imaging performance when FrFT is applied to RD algorithm.To overcome the above shortcomings,the purpose of this paper is to propose a high-resolution SAR image algorithm by using the optimal order of FrFT and the sample length constraints for the range direction.The expression of the optimal order of SAR range signals via FrFT is deduced in detail.The initial sample length and its constraints are proposed to obtain the best sample length of SAR range signals.Experimental results demonstrate that,when the range sampling-length changes in a certain interval,the best sampling-length will be obtained,which the best values of the range resolution,PSLR and ISLR,will be derived respectively.Compared with traditional RD algorithm,the main-lobe width of the peak-point target of the proposed algorithm is narrow in the range direction.While the peak amplitude of the first side-lobe is reduced significantly,those of other side-lobes also drop in various degrees.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2022YFA1603601,2021YFF0601203,and 2021YFA1600703)。
文摘The unique advantage of x-ray ghost imaging(XGI)is its potential in low dose radiology.One of the practical ways to reduce the radiation exposure is to reduce the measurements while remaining sufficient image quality.Synthetic aperture x-ray ghost imaging(SAXGI)is invented to achieve megapixel XGI with limited measurements,which is expected to implement XGI simultaneously with large field of view and low radiation exposure.In this paper,we experimentally investigate the effect of measurements reduction on the spatial resolution and image quality of SAXGI with standard sample and biomedical specimen.The results with a resolution chart demonstrated that at 360 measurements,SAXGI successfully retrieved the sample image of 1960×1960 pixels with spatial resolution of 4μm.With measurement reduction,the spatial resolution deteriorates but the sparser structures are still discernable.Even with measurements reduced to 10,a spatial resolution of 10μm can still be achieved by SAXGI.A biomedical sample of a fish specimen is employed to evaluate the method and the fish image of 2000×1000 pixels with an SSIM of 0.962 is reconstructed by SAXGI with 770measurements,corresponding to an accumulative exposure reduction of more than 2 times.With the measurements reduced to 10 which corresponds to 1/160 of the accumulative radiation exposure for conventional radiology,bulky structure like the fish skeleton can still be definitely discerned and the SSIM for the reconstructed image still retained 0.9179.Results of this paper demonstrate that measurements reduction is practicable for the radiation exposure reduction of the sample,which implicates that SAXGI with limited measurements is an efficient solution for low dose radiology.
基金supported by the National Basic Research Program of China(2011CB707001)the Fundamental Research Funds for the Central Universities(106112015CDJXY500001CDJZR165505)
文摘With appropriate geometry configuration, helicopter- borne rotating synthetic aperture radar （ROSAR） can break through the limitations of monostatic synthetic aperture radar （SAR） on forward-looking imaging. With this capability, ROSAR has extensive potential applications, such as self-navigation and self-landing. Moreover, it has many advantages if combined with the frequency modulated continuous wave （FMCW） technology. A novel geometric configuration and an imaging algorithm for helicopter-borne FMCW-ROSAR are proposed. Firstly, by per- forming the equivalent phase center principle, the separated trans- mitting and receiving antenna system is equalized to the case of system configuration with antenna for both transmitting and receiving signals. Based on this, the accurate two-dimensional spectrum is obtained and the Doppler frequency shift effect in- duced by the continuous motion of the platform during the long pulse duration is compensated. Next, the impacts of the velocity approximation error on the imaging algorithm are analyzed in de- tail, and the system parameters selection and resolution analysis are presented. The well-focused SAR image is then obtained by using the improved Omega-K algorithm incorporating the accurate compensation method for the velocity approximation error. FJnally, correctness of the analysis and effectiveness of the proposed al- gorithm are demonstrated through simulation results.
文摘To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar（BiSAR）,an improved chirp scaling algorithm（CSA） is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.
文摘Compositional data, such as relative information, is a crucial aspect of machine learning and other related fields. It is typically recorded as closed data or sums to a constant, like 100%. The statistical linear model is the most used technique for identifying hidden relationships between underlying random variables of interest. However, data quality is a significant challenge in machine learning, especially when missing data is present. The linear regression model is a commonly used statistical modeling technique used in various applications to find relationships between variables of interest. When estimating linear regression parameters which are useful for things like future prediction and partial effects analysis of independent variables, maximum likelihood estimation (MLE) is the method of choice. However, many datasets contain missing observations, which can lead to costly and time-consuming data recovery. To address this issue, the expectation-maximization (EM) algorithm has been suggested as a solution for situations including missing data. The EM algorithm repeatedly finds the best estimates of parameters in statistical models that depend on variables or data that have not been observed. This is called maximum likelihood or maximum a posteriori (MAP). Using the present estimate as input, the expectation (E) step constructs a log-likelihood function. Finding the parameters that maximize the anticipated log-likelihood, as determined in the E step, is the job of the maximization (M) phase. This study looked at how well the EM algorithm worked on a made-up compositional dataset with missing observations. It used both the robust least square version and ordinary least square regression techniques. The efficacy of the EM algorithm was compared with two alternative imputation techniques, k-Nearest Neighbor (k-NN) and mean imputation (), in terms of Aitchison distances and covariance.
文摘Frequency-Modulation Continuous-Wave Synthetic Aperture Radar(FMCW SAR)has shown great potential in the applications of civil and military fields because of its easy deployment and low cost.However,most of these work and analysis are concentrated on airborne FMCW SAR,where the characteristics of the imaging geometry and signal are much similar to that of traditional pulsed-SAR.As a result,a series of test campaigns of automobile-based FMCW SAR were sponsored by Institute of Electronics,Chinese Academy of Sciences(IECAS)in the autumn of 2012.In this paper,we analyze the imaging issues of FMCW SAR in automobile mode(named as near range mode),where a vehicle is used as moving platform and a large looking angle is configured.The imaging geometry and signal properties are analyzed in detail.We emphasize the difference of the near range mode from the traditional airborne SAR mode.Based on the analysis,a focusing approach is proposed in the paper to handle the data focusing in the case.Simulation experiment and real data of automobile FMCW SAR are used to validate the analysis.
文摘A model based on Fourier domain consideration on aperture configuration of optical synthetic aperture imaging system is introduced in this paper. The derivation of the model is directly linked to the restoration error of the original object from the recorded image. The aperture configuration is a function of the maximum frequency of interest, and takes into account the diameter of the aperture. The simulative results of genetic algorithms illustrate the usefulness of this model lot designing a synthetic aperture optical imaging system, and the aperture configuration of a good synthetic aperture optical imaging system should be non-redundant.
基金the National High Technology Research and Development Program (863) of China(No. 2008AA12Z108)
文摘In this paper,a focusing approach is presented to widen the use of efficient monostatic imaging algorithms for azimuth-invariant bistatic synthetic aperture radar(SAR) data.The bistatic range history is modeled by a polynomial of azimuth time.Using this model,an analytic form of the signal spectrum in the 2D frequency domain is derived,and a simple single-valued relation between the transmitter and receive ranges is established.In this way,a lot of monostatic image formation algorithms can be extended for the bistatic SAR data,and a bistatic chirp scaling algorithm is developed as an application of the new approach.This algorithm can be used to process the azimuth-invariant bistatic configuration where the transmitter and receiver platforms are moving on parallel tracks with the same velocity.In addition,some simulation results are given to demonstrate the validity of the proposed approach.
基金Projects 50375118,5014006 supported by the National Natural Science Foundation of China
文摘In order to meet the requirement of network synthesis optimization design for a micro component, a three-level information frame and functional module based on web was proposed. Firstly, the finite element method （FEM） was used to analyze the dynamic property of coupled-energy-domain of virtual prototype instances and to obtain some optimal information data. Secondly, the rough set theory （RST） and the genetic algorithm （GA） were used to work out the reduction of attributes and the acquisition of principle of optimality and to confirm key variable and restriction condition in the synthesis optimization design. Finally, the regression analysis （RA） and GA were used to establish the synthesis optimization design model and carry on the optimization design. A corresponding prototype system was also developed and the synthesis optimization design of a thermal actuated micro-pump was carded out as a demonstration in this paper.
基金National Natural Science Foundation of China(41475019,41631072)
文摘One-dimensional synthetic aperture microwave radiometers have higher spatial resolution and record measurements at multiple incidence angles.In this paper,we propose a multiple linear regression method to retrieve sea surface wind speed at an incidence angle between 0°65°.We assume that a one-dimensional synthetic aperture microwave radiometer operates at frequencies of 6.9,10.65,18.7,23.8 and 36.5 GHz.Then,the microwave radiative transfer forward model is used to simulate the measured brightness temperatures.The sensitivity of the brightness temperatures at 0°65°to the sea surface wind speed is calculated.Then,vertical polarization channels(VR),horizontal polarization channels(HR)and all channels(AR)are used to retrieve the sea surface wind speed via a multiple linear regression algorithm at 0°65°,and the relationship between the retrieval error and incidence angle is obtained.The results are as follows:(1)The sensitivity of the vertical polarization brightness temperature to the sea surface wind speed is smaller than that of the horizontal polarization.(2)The retrieval error increases with Gaussian noise.The retrieval error of VR first increases and then decreases with increasing incidence angle,the retrieval error of HR gradually decreases with increasing incidence angle,and the retrieval error of AR first decreases and then increases with increasing incidence angle.(3)The retrieval error of AR is the lowest and it is necessary to retrieve the sea surface wind speed at a larger incidence angle for AR.
基金New Century Program for Excellent Talents of Minis-try of Education of China (NECT-06-0166)The Eleventh Five-year Scientific and Technological Development Plan of National Defense Pre-study Foundation (A2120060006)
文摘Aiming at parallel distributed constant false alarm rate （CFAR） detection employing K/N fusion rule,an optimization algorithm based on the genetic algorithm with interval encoding is proposed. N-1 local probabilities of false alarm are selected as optimization variables. And the encoding intervals for local false alarm probabilities are sequentially designed by the person-by-person optimization technique according to the constraints. By turning constrained optimization to unconstrained optimization,the problem of increasing iteration times due to the punishment technique frequently adopted in the genetic algorithm is thus overcome. Then this optimization scheme is applied to spacebased synthetic aperture radar （SAR） multi-angle collaborative detection,in which the nominal factor for each local detector is determined. The scheme is verified with simulations of cases including two,three and four independent SAR systems. Besides,detection performances with varying K and N are compared and analyzed.
基金funding from the Natural Science Foundation of Henan Province(252300421852)the State Key Laboratory of Development and Comprehensive Utilization of Coking Coal Resources(41040220201308)+4 种基金the National Natural Science Foundation of China(41972254)the China Postdoctoral Science Foundation(2019M662494)Supported by the Key Scientific Research Projects of Higher Education Institutions of Henan Province(19A170005)the Fundamental Research Funds for the Universities of Henan Province(NSFRF200337,NSFRF200103)Key Research and Development Project of Henan Province(251111322300).
文摘Accurate identification of water sources is crucial for effective water management and safety in mining operations.However,imbalanced water sample datasets often lead to suboptimal classification accuracy.To address this challenge,this study proposes a novel water source identification method integrating Synthetic Minority Over-Sampling Technique(SMOTE),Zebra Optimization Algorithm(ZOA),and Light Gradient Boosting Machine(LightGBM).Initially,SMOTE is utilized to synthesize samples for the minority class within the imbalanced dataset,thereby generating a balanced water sample dataset and mitigating class distribution disparities.Subsequently,an efficient water source identification model is constructed by combining ZOA with LightGBM,leveraging the strengths of both algorithms.The model’s performance is validated using a test set and compared with other common classification models.Results demonstrate that SMOTE significantly alleviates class imbalance and enhances the classification accuracy of LightGBM for minority class water samples.ZOA parameter tuning accelerates model convergence and further improves classification accuracy,optimizing the model’s overall performance.In experimental validation,the proposed SMOTE-ZOA-LightGBM model achieved an accuracy of 88.41%and a F1 score of 88.24%,outperforming six other classification models.The method proposed in this paper can accurately identify water source types,effectively addressing the issue of low classification accuracy caused by imbalanced water sample data.It provides reliable technical support and scientific basis for identifying and preventing water inrush sources in mines.
文摘An improved circular synthetic aperture radar（CSAR） imaging algorithm of omega-k（ω-k） type mainly for reconstructing an image on a cylindrical surface is proposed.In the typical CSAR ω-k algorithm,the rage trajectory is approximated by Taylor series expansion to the quadratic terms,which limits the valid synthetic aperture length and the angular reconstruction range severely.Based on the model of the CSAR echo signal,the proposed algorithm directly transforms the signal to the two-dimensional（2D） wavenumber domain,not using approximation processing to the range trajectory.Based on form of the signal spectrum in the wavenumber domain,the formula for the wavenumber domain interpolation of the w-k algorithm is deduced,and the wavenumber spectrum of the reference point used for bulk compression is obtained from numerical method.The improved CSAR ω-k imaging algorithm increases the valid synthetic aperture length and the angular area greatly and hence improves the angular resolution of the cylindrical imaging.Additionally,the proposed algorithm can be repeated on different cylindrical surfaces to achieve three dimensional（3D） image reconstruction.The 3D spatial resolution of the CSAR system is discussed,and the simulation results validate the correctness of the analysis and the feasibility of the algorithm.
基金National Natural Science F oundation of china(68931040)
文摘Among Synthetic Aperture Radar(SAR)image formation algorithms,the chirp scaling algorithm(CSA)is computationally highly efficient and has been practically used.In this paper,how to implement the subaperture extended CSA in a high resolution spotlight mode SAR is studied in detail.The procedures such as subaperture processing and azimuth processing are discussed.According to the problems presented when using the method(A.Moreira,et al,1996)to process spotlight SAR data,full formula expressions suitable for high squinted angles is presented.While point target simulation is analyzed,the method is validated by E SAR raw data.The results can be directly implemented in the design of SAR processors.
基金This project was supported by the National Natural Science Foundation of China (No. 49831060).
文摘Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.
基金This work is supported by the 13th Five-Year Plan for Jiangsu Education Science(D/2020/01/22)JSPIGKZ and Natural Science Research Projects of Colleges and Universities in Jiangsu Province(19KJB510022)。
文摘The traditional Range Doppler(RD)algorithm is unable to meet practical needs owing to the limit of resolution.The order of fractional Fourier Transform(FrFT)and the length of sampling signals affect SAR imaging performance when FrFT is applied to RD algorithm.To overcome the above shortcomings,the purpose of this paper is to propose a high-resolution SAR image algorithm by using the optimal order of FrFT and the sample length constraints for the range direction.The expression of the optimal order of SAR range signals via FrFT is deduced in detail.The initial sample length and its constraints are proposed to obtain the best sample length of SAR range signals.Experimental results demonstrate that,when the range sampling-length changes in a certain interval,the best sampling-length will be obtained,which the best values of the range resolution,PSLR and ISLR,will be derived respectively.Compared with traditional RD algorithm,the main-lobe width of the peak-point target of the proposed algorithm is narrow in the range direction.While the peak amplitude of the first side-lobe is reduced significantly,those of other side-lobes also drop in various degrees.
