Compact antenna designs have become a critical component in the recent advancements of wireless communication technologies over the past few decades. This paper presents a self-multiplexing antenna based on diplexing ...Compact antenna designs have become a critical component in the recent advancements of wireless communication technologies over the past few decades. This paper presents a self-multiplexing antenna based on diplexing and quadruplexing Substrate-Integrated Waveguide (SIW) cavities. The diplexing structure incorporates two V-shaped slots, while the quadruplexing structure advances this concept by combining the slots to form a cross-shaped configuration within the cavity. The widths and lengths of the slots are carefully tuned to achieve variations in the respective operating frequencies without affecting the others. The proposed diplexing antenna resonates at 8.48 and 9.2 GHz, with a frequency ratio of 1.08, while the quadruplexing antenna operates at 6.9, 7.1, 7.48, and 8.2GHz. Both designs exhibit isolation levels well below –20dB and achieve a simulated peak gain of 5.6 dBi at the highest frequency, with a compact cavity area of 0.56 λg^(2). The proposed antennas operate within the NR bands (n12, n18, n26), making them suitable for modern high-speed wireless communication systems. Moreover, the properties like multiband operation, compactness, high isolation, low loss, and low interference make the antenna favorable for the high-speed railway communication systems.展开更多
A frequency selective polarization rotator that can rotate the polarization angle of an incident electromagnetic wave at the microwave frequency by 45 is presented. The polarization rotator is based on a two-dimension...A frequency selective polarization rotator that can rotate the polarization angle of an incident electromagnetic wave at the microwave frequency by 45 is presented. The polarization rotator is based on a two-dimensional periodic array of substrate integrated waveguide cavities, realizing the polarization rotation by coupling the input signal to the output wave through three metallic slots. Two layers of frequency selective surfaces are cascaded by substrate and form the polarization rotator. A vertical slot on the top layer is used to select the horizontal polarization from the incident wave, the vertical and the horizontal slots on the bottom layer are, respectively, used to obtain horizontally and vertically polarized outgoing waves. The two orthogonal outgoing waves are combined to result in the 45~ polarized wave. Both full wave simulation and experimental measurement are carried out, together validating the proposed method.展开更多
Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide ...Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.展开更多
A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w i...A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.展开更多
A miniaturized multi-frequency circularly polarized array is designed in this paper.The antenna array is composed of three independent sub-arrays employing modified quarter-mode substrate ntegrated aveguide(QMSIW)to a...A miniaturized multi-frequency circularly polarized array is designed in this paper.The antenna array is composed of three independent sub-arrays employing modified quarter-mode substrate ntegrated aveguide(QMSIW)to achieve three circularly polarized frequency bands.By introducing strip-slot,the impedance bandwidth of the antenna array is broadened while the dimension is decreased by 75%to realize miniaturization.Meanwhile,metasurface causes the impedance bandwidth of the sub-array to be further enhanced.Moreover,the metal vias are employed in the antenna array design to further achieve miniaturization.The antenna array is manufactured and measured to verify the design.Both the measured and simulated results display that the array achieves the impedance bandwidths of 10%,11.7%,and 14.8%and axial ratio bandwidths of 8.8%,8.0%,and 8.5%at 2.5,3.5,and 4.8 GHz,respectively.The gain is stable in the operating band within an uncertainty of 0.7 d Bi.The whole dimension is 0.92λ×0.63λ×0.04λ,whereλ_(0) is the wavelength at the lowest resonant frequency.Furthermore,the simple structure and miniaturization provides great convenience in sub-6 applications.展开更多
An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferom...An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.展开更多
Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively...Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.展开更多
In this paper Substrate Integrated Waveguide-basedfiltenna operating at Ku band is proposed.The model is designed on a low loss dielectric substrate having a thickness of 0.508 mm and comprises of shorting vias along ...In this paper Substrate Integrated Waveguide-basedfiltenna operating at Ku band is proposed.The model is designed on a low loss dielectric substrate having a thickness of 0.508 mm and comprises of shorting vias along two edges of the substrate walls.To realize a bandpassfilter,secondary shorting vias are placed close to primary shorting vias.The dimension and position of the vias are carefully analyzed for Ku band frequencies.The model is fabricated on Roger RT/duroid 5880 and the performance characteristics are measured.The proposed model achieves significant impedance characteristics with wider bandwidth in the Ku band.The model also achieves a maximum gain of 7.46 dBi in the operating band thus making it suitable for Ku-band applications.Substrate Integrated Waveguide(SIW)Structures possess most of the advantages over conventional radiofrequency waveguides since they have high power management capacity with self-consistent electrical shielding.The most noteworthy advantage of SIW,it can able to integrate all the components on the same substrate,both passive and active components.展开更多
In this paper, we demonstrated a compact Si-SiO2 waveguide coupler with a footprint of only 2 μm × 3 μm by topology optimization in the communication wavelength. The transmission was increased from 30% to 100%,...In this paper, we demonstrated a compact Si-SiO2 waveguide coupler with a footprint of only 2 μm × 3 μm by topology optimization in the communication wavelength. The transmission was increased from 30% to 100%, much higher than other methods. Besides, the optimized structure did not incorporate other dielectric materials, facilitating fabrications and applications.展开更多
Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with ele...Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with electromagnetic band gap (EBG);and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a fractional bandwidth of 4.95% at the midband frequency of 9.08 GHz;the proposed EBG-SIW resonator operates at 9.12 GHz with a bandwidth of 4.38% and the CSRR-SIW resonator operates at 8.66 GHz with a bandwidth of 2.54%. The proposed filters have the high Q-factors and generate a transmission zero in upper stopband, and these by the use of Rogers RT/duriod 5880 (tm).展开更多
In this paper, we first propose a metamaterial structure by etching the same two interdigital fingers on the upper ground of quarter mode substrate integrated waveguide（QMSIW）. The simulated results show that the pr...In this paper, we first propose a metamaterial structure by etching the same two interdigital fingers on the upper ground of quarter mode substrate integrated waveguide（QMSIW）. The simulated results show that the proposed QMSIWbased metamaterial has a continuous phase constant changing from negative to positive values within its passband. A periodic leaky-wave antenna（LWA）, which consists of 11 QMSIW-based metamaterial unit cells, is designed, fabricated,and measured. The measured results show that the fabricated antenna achieves a continuous beam scanning property from backward-43° to forward ＋32° over an operating frequencyrange of 8.9 GHz–11.8 GHz with return loss better than 10 d B.The measured antenna gain keeps consistent with the variation of less than 2 d B over the operating frequency range with a maximum gain of 12 d B. Besides, the measured and simulated results are in good agreement with each other, indicating the significance and effectiveness of this method.展开更多
This article addresses the past,present,and future status of hybrid plasmonic waveguides(HPWs).It presents a comprehensive review of HPW-based photonic integrated circuits(PICs),covering both passive and active device...This article addresses the past,present,and future status of hybrid plasmonic waveguides(HPWs).It presents a comprehensive review of HPW-based photonic integrated circuits(PICs),covering both passive and active devices,as well as potential application of on-chip HPWbased devices.HPW-based integrated circuits(HPWICs)are compatible with complementary metal oxide semiconductor technology,and their matched refractive indices enables the adaptation of existing fabrication processes for silicon-on-insulator designs.HPWs combine plasmonic and photonic waveguide components to provide strong confinement with longer propagation length L_(p)of HP modes with nominal losses.These HPWs are able to make a trade-off between low loss and longer L_(p),which is not possible with independent plasmonic and photonic waveguide components owing to their inability to simultaneously achieve low propagation loss with rapid and effective all-optical functionality.With HPWs,it is possible to overcome challenges such as high Ohmic losses and enhance the functional performance of PICs through the use of multiple discrete components.HPWs have been employed not only to guide transverse magnetic modes but also for optical beam manipulation,wireless optical communication,filtering,computation,sensing of bending,optical signal emission,and splitting.They also have the potential to play a pivotal role in optical communication systems for quantum computing and within data centers.At present,HPW-based PICs are poised to transform wireless chip-to-chip communication,a number of areas of biomedical science,machine learning,and artificial intelligence,as well as enabling the creation of densely integrated circuits and highly compact photonic devices.展开更多
An exact solution based on the wavenumber integration method is proposed and implemented in a numerical model for the acoustic field in a Pekeris waveguide excited by either a point source in cylindrical geometry or a...An exact solution based on the wavenumber integration method is proposed and implemented in a numerical model for the acoustic field in a Pekeris waveguide excited by either a point source in cylindrical geometry or a line source in plane geometry. Besides, an unconditionally stable numerical solution is also presented, which entirely resolves the stability problem in previous methods. Generally the branch line integral contributes to the total field only at short ranges, and hence is usually ignored in traditional normal mode models. However, for the special case where a mode lies near the branch cut, the branch line integral can contribute to the total field significantly at all ranges. The wavenumber integration method is well-suited for such problems. Numerical results are also provided, which show that the present model can serve as a benchmark for sound propagation in a Pekeris waveguide.展开更多
To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,u...To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,utilizing the reflection of the grating to achieve the electromagnetic-like induced transparency effect at different wavelengths.The high slope characteristics of the EIT-like effect enabled a higher quality factor and sensitivity.The transmission principle of the structure was analyzed using the transmission matrix method,and the transmission spectrum and mode field distribution were simulated using the finite-difference time-domain(FDTD)method,and the device structure parameters were adjusted for optimization.Simulation results show that the proposed structure achieves an EIT-like effect with a quality factor of 59267.5.In the analysis of refractive index sensing characteristics,the structure exhibits a sensitivity of 408.57 nm/RIU and a detection limit of 6.23×10^(-5) RIU.Therefore,the proposed structure achieved both a high quality factor and refractive index sensitivity,demonstrating excellent sensing performance for applications in environmental monitoring,biomedical fields,and other areas with broad market potential.展开更多
Miniaturized erbium-doped waveguide amplifiers attracted great interests in recent decades due to their high gain-efficiency and function-scalability in the telecom C-band.In this work,an erbium-doped thin film lithiu...Miniaturized erbium-doped waveguide amplifiers attracted great interests in recent decades due to their high gain-efficiency and function-scalability in the telecom C-band.In this work,an erbium-doped thin film lithium niobate waveguide amplifier achieving>10 dB off-chip(fiber-to-fiber)net gain and>20 mW fiber-output amplified power is demonstrated,thanks to the low-propagation-loss waveguides and robust waveguide edge-couplers prepared by the photolithography assisted chemomechanical etching technique.Systematic investigation on the fabricated waveguide amplifiers reveals remarkable optical gain around the peak wavelength of 1532 nm as well as the low fiber-coupling loss of-1.2 dB/facet.A fiber Bragg-grating based waveguide laser is further demonstrated using the fabricated waveguide amplifier as the external gain chip,which generates>2 mW off-chip power continuous-wave lasing around the gain peak at 1532 nm.The unambiguous demonstration of fiber-to-fiber net gain of the erbium-doped thinfilm lithium niobate(TFLN)waveguide amplifier as well as its external gain chip application will benefit diverse fields demanding scalable gain elements with highspeed tunability.展开更多
Based on the second kind of Green’s identity,a boundary integral equation forarbitrary cross-section waveguide is transformed to a system of linear homogeneous algebraicequations by means of expansion of boundary bas...Based on the second kind of Green’s identity,a boundary integral equation forarbitrary cross-section waveguide is transformed to a system of linear homogeneous algebraicequations by means of expansion of boundary bases and by using the eigenfunctions of a fictitiousregular boundary as weighting functions,which corresponds to less algebraic equations than BEMand simpler coefficients than the modified BEM.The numerical results for some typical metallicwaveguides are given by using the method of eigen-weighted boundary integral equation,and theyare accurate enough with fast convergence.展开更多
GaN-based devices have developed significantly in recent years due to their promising applications and research potential.A major goal is to monolithically integrate various GaN-based components onto a single chip to ...GaN-based devices have developed significantly in recent years due to their promising applications and research potential.A major goal is to monolithically integrate various GaN-based components onto a single chip to create future optoelectronic systems with low power consumption.This miniaturized integration not only enhances multifunctional performance but also reduces material,processing,and packaging costs.In this study,we present an optoelectronic on-chip system fabricated using a top-down approach on a III-nitride-on-silicon wafer.The system includes a near-ultraviolet light source,a monitor,a 180°bent waveguide,an electro-absorption modulator,and a receiver,all integrated without the need for regrowth or post-growth doping.35 Mbit/s optical data communication is demonstrated through light propagation within the system,confirming its potential for compact GaN-based optoelectronic solutions.展开更多
The fabrication of Bragg gratings on silicon-on-insulator （SOI） rib waveguides using electron-beam lithography is presented. The grating waveguide is optimally designed for actual photonic integration. Experimental ...The fabrication of Bragg gratings on silicon-on-insulator （SOI） rib waveguides using electron-beam lithography is presented. The grating waveguide is optimally designed for actual photonic integration. Experimental and theoretical evaluations of the Bragg grating are demonstrated. By thinning the SOl device layer and deeply etching the Bragg grating, a large grating coupling coefficient of 30cm^-1 is obtained.展开更多
The realization of high responsivity,high sensitivity,fast response,and wide operation band photodetection in silicon photonics is currently a critical challenge for emerging applications such as on-chip optical sensi...The realization of high responsivity,high sensitivity,fast response,and wide operation band photodetection in silicon photonics is currently a critical challenge for emerging applications such as on-chip optical sensing and spectroscopy.In this work,we present a promising solution by integrating a graphene–colloidal-quantum-dot(CQD)heterostructure onto a silicon waveguide platform to construct photodetectors with large photogating gain,without needing complex layered structures.Waveguide integration confines light and CQDs within a compact active region featuring short channel length and absorption length.Leveraging graphene’s low density of states and high mobility,the device simultaneously achieves high-responsivity,high-sensitivity,and high-speed performance.The device achieved a responsivity of 1.1×10^(5) AW^(−1) to 4 AW^(−1) and a noise equivalent power(NEP)of 1.27×10^(−4) to 2.03 pWHz−0.5 when subjected to input optical power ranging from 56 pW to 3μW at 1.55μm.Notably,a substantial bandwidth of 2.7 MHz was reached,outperforming the high-gain counterparts based on the photogating effect.By adjusting the energy band of the graphene–CQD heterostructure,the manipulation of the photogating response is realized,offering valuable insights for further optimization of the high-gain photodetectors.Furthermore,we demonstrate dynamic tuning of the graphene–CQD heterostructure band alignment via an integrated gate electrode,enabling the modulation of the photogating response while elucidating the underlying mechanism.This approach provides a good pathway for performance improvement of similar photogating devices.In the future,this platform can be readily extended to longer wavelengths(e.g.,midinfrared)through straightforward adjustments to CQD synthesis parameters or material composition,complemented by protective-layer passivation for enhanced operational stability.With its compatibility with scalable fabrication processes,this architecture holds significant promise for broadband,high-sensitivity,high-speed,onchip photodetection applications.展开更多
We present an all polymer asymmetric Mach-Zehnder interferometer （AMZI） waveguide sensor based on imprinting bonding and laser polishing method. The fabrication methods are compatible with high accuracy waveguide se...We present an all polymer asymmetric Mach-Zehnder interferometer （AMZI） waveguide sensor based on imprinting bonding and laser polishing method. The fabrication methods are compatible with high accuracy waveguide sensing structure. The rectangle waveguide structure of this sensor has three sensing surfaces contacting the test media, and its sensing accuracy can be increased 5 times compared with that of one surface sensing structure. An AMZI device structure is designed. The single mode condition, the length of the sensing arm, and the length deviation between the sensing arm and the reference arm are optimized. The length deviation is optimized to be 19.8 μm in a refractive index range between 1.470 and 1.545. We fabricate the AMZI waveguide by lithography and wet etching method. The imprinting bonding and laser polishing method is proposed and investigated. The insertion loss is between-80.36 dB and-10.63 dB. The average and linear sensitivity are 768.1 dB/RIU and 548.95 dB/RIU, respectively. And the average and linear detection resolution of the sensor are 1.3010-6 RIU （RIU：refractive index unit） and 1.8210-5 RIU, respectively. This sensor has a fast and cost-effective fabrication process which can be used in the cases of requiring portability and disposability.展开更多
文摘Compact antenna designs have become a critical component in the recent advancements of wireless communication technologies over the past few decades. This paper presents a self-multiplexing antenna based on diplexing and quadruplexing Substrate-Integrated Waveguide (SIW) cavities. The diplexing structure incorporates two V-shaped slots, while the quadruplexing structure advances this concept by combining the slots to form a cross-shaped configuration within the cavity. The widths and lengths of the slots are carefully tuned to achieve variations in the respective operating frequencies without affecting the others. The proposed diplexing antenna resonates at 8.48 and 9.2 GHz, with a frequency ratio of 1.08, while the quadruplexing antenna operates at 6.9, 7.1, 7.48, and 8.2GHz. Both designs exhibit isolation levels well below –20dB and achieve a simulated peak gain of 5.6 dBi at the highest frequency, with a compact cavity area of 0.56 λg^(2). The proposed antennas operate within the NR bands (n12, n18, n26), making them suitable for modern high-speed wireless communication systems. Moreover, the properties like multiband operation, compactness, high isolation, low loss, and low interference make the antenna favorable for the high-speed railway communication systems.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60990322,60990320,60801001,and 61101011)the Key Grant Project of Ministry of Education of China(Grant No.313029)+1 种基金the Ph.D.Program Foundation of Ministry of Education of China(Grant Nos.20100091110036 and 20120091110032)the Jiangsu Key Laboratory of Advanced Techniques for Manipulating Electromagnetic Waves,China
文摘A frequency selective polarization rotator that can rotate the polarization angle of an incident electromagnetic wave at the microwave frequency by 45 is presented. The polarization rotator is based on a two-dimensional periodic array of substrate integrated waveguide cavities, realizing the polarization rotation by coupling the input signal to the output wave through three metallic slots. Two layers of frequency selective surfaces are cascaded by substrate and form the polarization rotator. A vertical slot on the top layer is used to select the horizontal polarization from the incident wave, the vertical and the horizontal slots on the bottom layer are, respectively, used to obtain horizontally and vertically polarized outgoing waves. The two orthogonal outgoing waves are combined to result in the 45~ polarized wave. Both full wave simulation and experimental measurement are carried out, together validating the proposed method.
基金This project is supported by the National Basic Research Program of China （＂973＂ Program） under Grant No. 2014CB339900 and the National Natural Science Foundation of China under Grant No. 61372056.
文摘Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.
基金the DRDO,Government of India for providing financial patronage in executing this research work
文摘A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.
基金Project supported by the National Natural Science Foundation of China(Grant No.61871394)。
文摘A miniaturized multi-frequency circularly polarized array is designed in this paper.The antenna array is composed of three independent sub-arrays employing modified quarter-mode substrate ntegrated aveguide(QMSIW)to achieve three circularly polarized frequency bands.By introducing strip-slot,the impedance bandwidth of the antenna array is broadened while the dimension is decreased by 75%to realize miniaturization.Meanwhile,metasurface causes the impedance bandwidth of the sub-array to be further enhanced.Moreover,the metal vias are employed in the antenna array design to further achieve miniaturization.The antenna array is manufactured and measured to verify the design.Both the measured and simulated results display that the array achieves the impedance bandwidths of 10%,11.7%,and 14.8%and axial ratio bandwidths of 8.8%,8.0%,and 8.5%at 2.5,3.5,and 4.8 GHz,respectively.The gain is stable in the operating band within an uncertainty of 0.7 d Bi.The whole dimension is 0.92λ×0.63λ×0.04λ,whereλ_(0) is the wavelength at the lowest resonant frequency.Furthermore,the simple structure and miniaturization provides great convenience in sub-6 applications.
基金supported by the National Natural Science Foundation of China (No. 40774067)the Applied Basic Research Program of Sichuan Province, China (No. 07JY029-135)
文摘An investigation of the properties ofa LiNbO3 photoelastic waveguide via the acceleration-induced effect is presented. A novel three-component hybrid-integrated optical accelerometer based on a Mach-Zehnder interferometer with a LiNbO3 photoelastic waveguide has been designed, which is capable of detecting seismic acceleration in high-accuracy seismic exploration. The Mach-Zehnder interferometer was successfully fabricated and a lighting test used to check its quality. The frequency response characteristic of the accelerometer was measured2 The accelerometer with a resonant frequency of 3549 Hz was demonstrated to show good linear frequency responding characteristics in the range of 100-3000 Hz. The accelerometer also shows good stability and consistency. Experimental results indicate that the outputs of the on- and cross-axis are 147 and 21.3 mV, respectively.
基金Project supported by the National Natural Science Foundation of China (Grant No.61871394)。
文摘Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.
文摘In this paper Substrate Integrated Waveguide-basedfiltenna operating at Ku band is proposed.The model is designed on a low loss dielectric substrate having a thickness of 0.508 mm and comprises of shorting vias along two edges of the substrate walls.To realize a bandpassfilter,secondary shorting vias are placed close to primary shorting vias.The dimension and position of the vias are carefully analyzed for Ku band frequencies.The model is fabricated on Roger RT/duroid 5880 and the performance characteristics are measured.The proposed model achieves significant impedance characteristics with wider bandwidth in the Ku band.The model also achieves a maximum gain of 7.46 dBi in the operating band thus making it suitable for Ku-band applications.Substrate Integrated Waveguide(SIW)Structures possess most of the advantages over conventional radiofrequency waveguides since they have high power management capacity with self-consistent electrical shielding.The most noteworthy advantage of SIW,it can able to integrate all the components on the same substrate,both passive and active components.
文摘In this paper, we demonstrated a compact Si-SiO2 waveguide coupler with a footprint of only 2 μm × 3 μm by topology optimization in the communication wavelength. The transmission was increased from 30% to 100%, much higher than other methods. Besides, the optimized structure did not incorporate other dielectric materials, facilitating fabrications and applications.
文摘Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with electromagnetic band gap (EBG);and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a fractional bandwidth of 4.95% at the midband frequency of 9.08 GHz;the proposed EBG-SIW resonator operates at 9.12 GHz with a bandwidth of 4.38% and the CSRR-SIW resonator operates at 8.66 GHz with a bandwidth of 2.54%. The proposed filters have the high Q-factors and generate a transmission zero in upper stopband, and these by the use of Rogers RT/duriod 5880 (tm).
基金Project supported by the National Natural Science Foundation of China(Grant No.61372034)
文摘In this paper, we first propose a metamaterial structure by etching the same two interdigital fingers on the upper ground of quarter mode substrate integrated waveguide（QMSIW）. The simulated results show that the proposed QMSIWbased metamaterial has a continuous phase constant changing from negative to positive values within its passband. A periodic leaky-wave antenna（LWA）, which consists of 11 QMSIW-based metamaterial unit cells, is designed, fabricated,and measured. The measured results show that the fabricated antenna achieves a continuous beam scanning property from backward-43° to forward ＋32° over an operating frequencyrange of 8.9 GHz–11.8 GHz with return loss better than 10 d B.The measured antenna gain keeps consistent with the variation of less than 2 d B over the operating frequency range with a maximum gain of 12 d B. Besides, the measured and simulated results are in good agreement with each other, indicating the significance and effectiveness of this method.
文摘This article addresses the past,present,and future status of hybrid plasmonic waveguides(HPWs).It presents a comprehensive review of HPW-based photonic integrated circuits(PICs),covering both passive and active devices,as well as potential application of on-chip HPWbased devices.HPW-based integrated circuits(HPWICs)are compatible with complementary metal oxide semiconductor technology,and their matched refractive indices enables the adaptation of existing fabrication processes for silicon-on-insulator designs.HPWs combine plasmonic and photonic waveguide components to provide strong confinement with longer propagation length L_(p)of HP modes with nominal losses.These HPWs are able to make a trade-off between low loss and longer L_(p),which is not possible with independent plasmonic and photonic waveguide components owing to their inability to simultaneously achieve low propagation loss with rapid and effective all-optical functionality.With HPWs,it is possible to overcome challenges such as high Ohmic losses and enhance the functional performance of PICs through the use of multiple discrete components.HPWs have been employed not only to guide transverse magnetic modes but also for optical beam manipulation,wireless optical communication,filtering,computation,sensing of bending,optical signal emission,and splitting.They also have the potential to play a pivotal role in optical communication systems for quantum computing and within data centers.At present,HPW-based PICs are poised to transform wireless chip-to-chip communication,a number of areas of biomedical science,machine learning,and artificial intelligence,as well as enabling the creation of densely integrated circuits and highly compact photonic devices.
基金supported by the National Natural Science Foundation of China(Grant No.11125420)the Knowledge Innovation Program of the Chinese Academy of Sciences+2 种基金the China Postdoctoral Science Foundation(Grant No.2014M561882)the Doctoral Fund of Shandong ProvinceChina(Grant No.BS2012HZ015)
文摘An exact solution based on the wavenumber integration method is proposed and implemented in a numerical model for the acoustic field in a Pekeris waveguide excited by either a point source in cylindrical geometry or a line source in plane geometry. Besides, an unconditionally stable numerical solution is also presented, which entirely resolves the stability problem in previous methods. Generally the branch line integral contributes to the total field only at short ranges, and hence is usually ignored in traditional normal mode models. However, for the special case where a mode lies near the branch cut, the branch line integral can contribute to the total field significantly at all ranges. The wavenumber integration method is well-suited for such problems. Numerical results are also provided, which show that the present model can serve as a benchmark for sound propagation in a Pekeris waveguide.
基金supported by Natural Science Foundation of Gansu Province(NO.21JR7RA289)。
文摘To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,utilizing the reflection of the grating to achieve the electromagnetic-like induced transparency effect at different wavelengths.The high slope characteristics of the EIT-like effect enabled a higher quality factor and sensitivity.The transmission principle of the structure was analyzed using the transmission matrix method,and the transmission spectrum and mode field distribution were simulated using the finite-difference time-domain(FDTD)method,and the device structure parameters were adjusted for optimization.Simulation results show that the proposed structure achieves an EIT-like effect with a quality factor of 59267.5.In the analysis of refractive index sensing characteristics,the structure exhibits a sensitivity of 408.57 nm/RIU and a detection limit of 6.23×10^(-5) RIU.Therefore,the proposed structure achieved both a high quality factor and refractive index sensitivity,demonstrating excellent sensing performance for applications in environmental monitoring,biomedical fields,and other areas with broad market potential.
基金financial supports from National Key R&D Program of China(Grant No.2022YFA1205100,2022YFA1404600)National Natural Science Foundation of China(Grant Nos.12192251,12334014,12474325,12134001,12304418,12474378,12274133,12174107,12174113,12274130)+2 种基金the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301403)Shanghai Municipal Science and Technology Major Project(Grant No.2019SHZDZX01)Fundamental Research Funds for the Central Universities,the Engineering Research Center for Nanophotonics&Advanced Instrument,Ministry of Education,East China Normal University(No.2023nmc005).
文摘Miniaturized erbium-doped waveguide amplifiers attracted great interests in recent decades due to their high gain-efficiency and function-scalability in the telecom C-band.In this work,an erbium-doped thin film lithium niobate waveguide amplifier achieving>10 dB off-chip(fiber-to-fiber)net gain and>20 mW fiber-output amplified power is demonstrated,thanks to the low-propagation-loss waveguides and robust waveguide edge-couplers prepared by the photolithography assisted chemomechanical etching technique.Systematic investigation on the fabricated waveguide amplifiers reveals remarkable optical gain around the peak wavelength of 1532 nm as well as the low fiber-coupling loss of-1.2 dB/facet.A fiber Bragg-grating based waveguide laser is further demonstrated using the fabricated waveguide amplifier as the external gain chip,which generates>2 mW off-chip power continuous-wave lasing around the gain peak at 1532 nm.The unambiguous demonstration of fiber-to-fiber net gain of the erbium-doped thinfilm lithium niobate(TFLN)waveguide amplifier as well as its external gain chip application will benefit diverse fields demanding scalable gain elements with highspeed tunability.
基金This project is supported by the Natural Science Foundation of China
文摘Based on the second kind of Green’s identity,a boundary integral equation forarbitrary cross-section waveguide is transformed to a system of linear homogeneous algebraicequations by means of expansion of boundary bases and by using the eigenfunctions of a fictitiousregular boundary as weighting functions,which corresponds to less algebraic equations than BEMand simpler coefficients than the modified BEM.The numerical results for some typical metallicwaveguides are given by using the method of eigen-weighted boundary integral equation,and theyare accurate enough with fast convergence.
基金This work was supported in part by the National Natural Science Founda⁃tion of China under Grant No.U21A20495National Key Research and De⁃velopment Program of China under Grant No.2022YFE0112000High⁃er Education Discipline Innovation Project under Grant No.D17018.
文摘GaN-based devices have developed significantly in recent years due to their promising applications and research potential.A major goal is to monolithically integrate various GaN-based components onto a single chip to create future optoelectronic systems with low power consumption.This miniaturized integration not only enhances multifunctional performance but also reduces material,processing,and packaging costs.In this study,we present an optoelectronic on-chip system fabricated using a top-down approach on a III-nitride-on-silicon wafer.The system includes a near-ultraviolet light source,a monitor,a 180°bent waveguide,an electro-absorption modulator,and a receiver,all integrated without the need for regrowth or post-growth doping.35 Mbit/s optical data communication is demonstrated through light propagation within the system,confirming its potential for compact GaN-based optoelectronic solutions.
文摘The fabrication of Bragg gratings on silicon-on-insulator （SOI） rib waveguides using electron-beam lithography is presented. The grating waveguide is optimally designed for actual photonic integration. Experimental and theoretical evaluations of the Bragg grating are demonstrated. By thinning the SOl device layer and deeply etching the Bragg grating, a large grating coupling coefficient of 30cm^-1 is obtained.
基金National Key Research and Development Program of China(2022YFA1204900,2024YFA1211200)National Ten Thousand Talent Program(Young Talents)+4 种基金National Natural Science Foundation of China(62475233,U24A20510,62374068)Natural Science Foundation of Zhejiang Province(LR22F050001,LD22F040004,LY23F040005)Innovation Project of Optics Valley Laboratory(OVL2023ZD002)State Key Laboratory of Pulsed Power Laser Technology(SKL2023KF02)Major Program(JD)of Hubei Province(2023BAA017).
文摘The realization of high responsivity,high sensitivity,fast response,and wide operation band photodetection in silicon photonics is currently a critical challenge for emerging applications such as on-chip optical sensing and spectroscopy.In this work,we present a promising solution by integrating a graphene–colloidal-quantum-dot(CQD)heterostructure onto a silicon waveguide platform to construct photodetectors with large photogating gain,without needing complex layered structures.Waveguide integration confines light and CQDs within a compact active region featuring short channel length and absorption length.Leveraging graphene’s low density of states and high mobility,the device simultaneously achieves high-responsivity,high-sensitivity,and high-speed performance.The device achieved a responsivity of 1.1×10^(5) AW^(−1) to 4 AW^(−1) and a noise equivalent power(NEP)of 1.27×10^(−4) to 2.03 pWHz−0.5 when subjected to input optical power ranging from 56 pW to 3μW at 1.55μm.Notably,a substantial bandwidth of 2.7 MHz was reached,outperforming the high-gain counterparts based on the photogating effect.By adjusting the energy band of the graphene–CQD heterostructure,the manipulation of the photogating response is realized,offering valuable insights for further optimization of the high-gain photodetectors.Furthermore,we demonstrate dynamic tuning of the graphene–CQD heterostructure band alignment via an integrated gate electrode,enabling the modulation of the photogating response while elucidating the underlying mechanism.This approach provides a good pathway for performance improvement of similar photogating devices.In the future,this platform can be readily extended to longer wavelengths(e.g.,midinfrared)through straightforward adjustments to CQD synthesis parameters or material composition,complemented by protective-layer passivation for enhanced operational stability.With its compatibility with scalable fabrication processes,this architecture holds significant promise for broadband,high-sensitivity,high-speed,onchip photodetection applications.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61605057,61475061,and 61575076)the Science and Technology Development Plan of Jilin Province,China(Grant No.20140519006JH)the Excellent Youth Foundation of Jilin Province,China(Grant No.20170520158JH)
文摘We present an all polymer asymmetric Mach-Zehnder interferometer （AMZI） waveguide sensor based on imprinting bonding and laser polishing method. The fabrication methods are compatible with high accuracy waveguide sensing structure. The rectangle waveguide structure of this sensor has three sensing surfaces contacting the test media, and its sensing accuracy can be increased 5 times compared with that of one surface sensing structure. An AMZI device structure is designed. The single mode condition, the length of the sensing arm, and the length deviation between the sensing arm and the reference arm are optimized. The length deviation is optimized to be 19.8 μm in a refractive index range between 1.470 and 1.545. We fabricate the AMZI waveguide by lithography and wet etching method. The imprinting bonding and laser polishing method is proposed and investigated. The insertion loss is between-80.36 dB and-10.63 dB. The average and linear sensitivity are 768.1 dB/RIU and 548.95 dB/RIU, respectively. And the average and linear detection resolution of the sensor are 1.3010-6 RIU （RIU：refractive index unit） and 1.8210-5 RIU, respectively. This sensor has a fast and cost-effective fabrication process which can be used in the cases of requiring portability and disposability.
