To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-lear...The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.展开更多
Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures ...Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.展开更多
A buckling-restrained steel plate shear wall(BRSPSW)structure with butterfly-shaped links on the lateral sides is introduced to improve the cooperative perfor-mance between the BRSPSW and the boundary frames.A one-spa...A buckling-restrained steel plate shear wall(BRSPSW)structure with butterfly-shaped links on the lateral sides is introduced to improve the cooperative perfor-mance between the BRSPSW and the boundary frames.A one-span two-story concrete-filled steel tube(CFT)column frame specimen equipped with lateral-side butterfly-shaped linked BRSPSWs(LBL-BRSPSWs)is evaluated under low-cycle reversed loading.A finite element(FE)model is developed and validated based on the test results.This FE model accurately simulates the failure modes and load-dis-placement curves.Parametric analyses are conducted on the butterfly-shaped links.The results show that the interactions between the CFT column frame and LBL-BRSPSWs are sig-nificantly influenced by the width ratio of the butterfly-shaped links,while the taper ratio and aspect ratio have relatively minor influences.Compared with traditional steel shear walls with four-sided connections,LBL-BRSPSWs reduce the additional axial forces and bending moments in the frame columns by 28%to 73%and 17%to 87%,respectively,with only a 9%to 30%decrease in the lateral resistance.The experimental and parametric analysis results indicate that setting butterfly-shaped links on the lateral sides of BRSPSWs can significantly enhance their cooperative performance with the boundary frame.The butterfly-shaped link width ratio has a linear relationship with the lateral-resistance performance of the specimens and the additional internal forces in the frame columns.To ensure that LBL-BRSPSW fails prior to the column frames,the link width ratio should be optimized.展开更多
La-Mg-Ni-based hydrogen storage alloys with superlattice structures are the new generation anode material for nickel metal hydride(Ni-MH)batteries owing to the advantages of high capacity and exceptional activation pr...La-Mg-Ni-based hydrogen storage alloys with superlattice structures are the new generation anode material for nickel metal hydride(Ni-MH)batteries owing to the advantages of high capacity and exceptional activation properties.However,the cycling stability is not currently satisfactory enough which plagues its application.Herein,a strategy of partially substituting La with the Y element is proposed to boost the capacity durability of La-Mg-Ni-based alloys.Furthermore,phase structure regulation is implemented simultaneously to obtain the A5 B19-type alloy with good crystal stability specifically.It is found that Y promotes the phase formation of the Pr5 Co19-type phase after annealing at 985℃.The alloy containing Y contributes to the superior rate capability resulting from the promoted hydrogen diffusion rate.Notably,Y substitution enables strengthening the anti-pulverization ability of the alloy in terms of increasing the volume match between[A_(2)B_(4)]and[AB5]subunits,and effectively enhances the anti-corrosion ability of the alloy due to high electronegativity,realizing improved long-term cycling stability of the alloy from 74.2%to 78.5%after cycling 300 times.The work is expected to shed light on the composition and structure design of the La-Mg-Ni-based hydrogen storage alloy for Ni-MH batteries.展开更多
The development of high-performance structural and functional materials is vital in many industrial fields.High-and medium-entropy alloys(H/MEAs)with superior comprehensive properties owing to their specific microstru...The development of high-performance structural and functional materials is vital in many industrial fields.High-and medium-entropy alloys(H/MEAs)with superior comprehensive properties owing to their specific microstructures are promising candidates for structural materials.More importantly,multitudinous efforts have been made to regulate the microstructures and the properties of H/MEAs to further expand their industrial applications.The various heterostructures have enormous potential for the development of H/MEAs with outstanding performance.Herein,multiple heterogeneous structures with single and hierarchical heterogeneities were discussed in detail.Moreover,preparation methods for compositional inhomogeneity,bimodal structures,dualphase structures,lamella/layered structures,harmonic structures(core-shell),multiscale precipitates and heterostructures coupled with specific microstructures in H/MEAs were also systematically reviewed.The deformation mechanisms induced by the different heterostructures were thoroughly discussed to explore the relationship between the heterostructures and the optimized properties of H/MEAs.The contributions of the heterostructures and advanced microstructures to the H/MEAs were comprehensively elucidated to further improve the properties of the alloys.Finally,this review discussed the future challenges of high-performance H/MEAs for industrial applications and provides feasible methods for optimizing heterostructures to enhance the comprehensive properties of H/MEAs.展开更多
Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser m...Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.展开更多
The effect of high welding heat inputs in the range of 50–200 kJ/cm on the microstructural evolution,MX(M=Ti,Nb and V;X=N and C)precipitation and mechanical properties was investigated in the coarse-grained heat-affe...The effect of high welding heat inputs in the range of 50–200 kJ/cm on the microstructural evolution,MX(M=Ti,Nb and V;X=N and C)precipitation and mechanical properties was investigated in the coarse-grained heat-affected zone(CGHAZ)of a high-Nb(0.10 wt.%)structural steel.The results showed that the primary microconstituents varied from lath bainite(LB)to intragranular acicular ferrite(IAF)+intragranular polygonal ferrite(IPF),and the most content of IAF was acquired at 100 kJ/cm.Moreover,the submicron Ti-and Nb-rich MX precipitates not only pinned prior austenite grain boundaries but also facilitated IAF and IPF nucleation with the Kurdjumov–Sachs orientation relationship of[011]_(MX)//[111]_(Ferrite);the nanoscale V-rich MX precipitates hindered dislocation movement and followed the Baker–Nutting orientation relationship of[001]_(MX)//[001]_(Ferrite)with ferrite matrix,synergistically strengthening and toughening the CGHAZ.In addition,the−20℃impact absorbed energy firstly elevated from 93±5.2 J at 50 kJ/cm to 131±5.4 J at 100 kJ/cm and finally decreased to 59±3.0 J at 200 kJ/cm,being related to the IAF content,while the microhardness decreased from 312±26.1 to 269±12.9 HV0.1,because of the coarsened microstructure and the decreased content of LB and martensite.Compared to the CGHAZ properties with 0.05 wt.%Nb,a higher Nb content produced better low-temperature toughness,as more solid dissolved Nb atoms and precipitated Nb-rich MX particles in austenite limited prior austenite grain growth and promoted IAF formation.Furthermore,the welding process at 100 kJ/cm was most applicable for the high-Nb steel.展开更多
Both solute-segregated long-period stacking ordered(LPSO)structure and stacking faults(SFs)are essential in strengthening rare-earth(RE)Mg alloys.Herein,LPSO-enriched Mg and SFs-enriched Mg are fabricated and comparab...Both solute-segregated long-period stacking ordered(LPSO)structure and stacking faults(SFs)are essential in strengthening rare-earth(RE)Mg alloys.Herein,LPSO-enriched Mg and SFs-enriched Mg are fabricated and comparably investigated for fatigue performances.During fatigue,the Mg nanolayers between LPSO lamellae or SFs act as the gliding channels of dislocations.However,SFs-enriched Mg exhibits outstanding fatigue strength due to solute strengthening within Mg nanolayers.Solute strengthening is assumed to contribute to the local accumulation of basal dislocations and the activation of non-basal dislocations.Dislocations are restricted locally and cannot glide long distances to specimen surfaces,which mitigates fatigue-induced extrusions and slip markings,ultimately leading to an increase in fatigue strength.These findings guide the development of RE-Mg alloys towards a synergy between high tensile and high fatigue performances.展开更多
The magnetic refrigeration(MR)based on the principle of magnetocaloric effect(MCE)in magnetic materials was recognized as an alternative cooling way to our present commercialized vapor compression cycle technology.Evi...The magnetic refrigeration(MR)based on the principle of magnetocaloric effect(MCE)in magnetic materials was recognized as an alternative cooling way to our present commercialized vapor compression cycle technology.Evidently,a vital prerequisite for practical applications is the exploration of candidate materials with prominent magnetocaloric performances.In this paper,the polycrystalline garnet RE_(3)Al_(5)O_(12)(RE=Tb,Dy and Ho)compounds with the cubic structure(space group:Ia3d)were prepared using the Pechini sol-gel method,and their crystal structure,magnetic properties and comprehensive magnetocaloric performances were studied.The analysis of magnetic susceptibility curves in a static magnetic field H=0.1 T reveal that the Dy_(3)Al_(5)O_(12)undergoes antiferromagnetic transition with Néel temperature TN≈2.6 K,whereas the Tb_(3)Al_(5)O_(12)and Ho_(3)Al_(5)O_(12)exhibit no features indicative of the magnetic ordering processes down to 1.8 K.The comprehensive magnetocaloric performances,namely the maximum magnetic entropy change and relative cooling power,are derived indirectly from the isothermal field-dependent magnetization data,which yield 11.72,10.42,7.53 J/(kg·K)and 84.56,69.52,70.35 J/kg for the Tb_(3)Al_(5)O_(12),Dy_(3)Al_(5)O_(12)and Ho_(3)Al_(5)O_(12)under a low field change(ΔH)of 0-2 T,respectively.The superior comprehensive magnetocaloric performances and wide operating temperature range of these compounds under lowΔH make them attractive for cryogenic MR technology.展开更多
Metallic lattice structures represent advanced architected materials delivering exceptional properties with promising lightweight potential.With the rapid advancement of additive manufacturing,these structures have ga...Metallic lattice structures represent advanced architected materials delivering exceptional properties with promising lightweight potential.With the rapid advancement of additive manufacturing,these structures have garnered increasing research interest.However,most metallic lattice structures generally exhibit anisotropic characteristics,which limits their application ranges.Additionally,a limited number of studies have successfully developed precise mechanical models,which have undergone experimental validation,for the purpose of describing the mechanical response exhibited by additively manufactured metallic lattice structures.In this study,Kelvin lattice structures with varying porosities were systematically designed and fabricated using laser powder bed fusion(LPBF)technology.By integrating finite element simulations with experimental characterization,an enhanced mechanical model was developed through a modification of the Gibson-Ashby model,providing an accurate quantitative description of the relationship between porosity and mechanical properties.The results show that the revised mechanical model can accurately describe the relationship between the geometric parameters and properties of metallic lattice structures.Specifically,the designed Kelvin lattice structures exhibit a smooth stress-strain curve with an obvious yield platform,demonstrating isotropic mechanical properties in all the three spatial directions.This enhances their suitability for complex loading conditions.Meanwhile,the microstructure and manufacturing accuracy of the Kelvin lattice structures were observed and analyzed by micro computed tomography.The results show that the fabricated metallic lattice structures achieved precise dimensional control and optimal densification.This study presents the complete process involved in modeling the Kelvin structure,including its conceptualization,manufacturing,implementation,and ultimately,disposal.展开更多
The waterproof performance,mechanical properties,chemical composition,microstructure,and pore structure of hydrophobically-modified geopolymer concrete are investigated before and after dry-wet cycles,to determine the...The waterproof performance,mechanical properties,chemical composition,microstructure,and pore structure of hydrophobically-modified geopolymer concrete are investigated before and after dry-wet cycles,to determine the long-term feasibility of using hydrophobically-modified geopolymer concrete in wet environments.We use two types of organic modifying agents:polydimethylsiloxane(PDMS)and sodium methyl siliconate(SMS).The experimental results show that incorporating 2%–6%PDMS or 5%–15%SMS can make the concrete hydrophobic,with water absorption and chloride transport rates decreasing by up to 94.3%.We also analyze the bonding modes of organic molecules and geopolymer gels,as well as their evolution mechanisms during dry-wet cycles.PDMS-modified geopolymer concrete is found to exhibit long-term waterproof performance that is not weakened by dry-wet cycles.This is attributed to the robust combination of organic components and the geopolymer gel skeleton formed through phase cross-linking.Meanwhile,PDMS-modified geopolymer concrete’s hydrophobicity,strength,and microstructure are essentially unaffected.In contrast,SMS-modified geopolymer concrete shows higher water sensitivity,although it does maintain efficient waterproof performance.Due to relatively low binding energy,the dry-wet cycles may lead to the detachment of some SMS molecules from the gel network,which results in a decrease of 18.6%in compressive strength and an increase of 37.6%in total porosity.This work confirms the utility of hydrophobically-modified geopolymer concrete as a building material for long-term service in wet environments,for instance,areas with frequent precipitation,or splash and tidal zones.展开更多
In order to investigate the influences of the stoichiometric ratio of La/Mg （increasing La and decreasing Mg on the same mole ratio） on the structure and electrochemical performances of the La-Mg-Ni-based A2B7-type ...In order to investigate the influences of the stoichiometric ratio of La/Mg （increasing La and decreasing Mg on the same mole ratio） on the structure and electrochemical performances of the La-Mg-Ni-based A2B7-type electrode alloy, the as-cast and the annealed ternary Lao.8＋xMgo.2_xNi3.5 （x=0-0.05） electrode alloys were prepared. The characterization of electrode alloys by X-ray diffraction （XRD） and scanning electron microscopy （SEM） shows that all the as-cast and the annealed alloys hold two major phases of （La,Mg）2Ni7 and LaNi5 as well as a residual phase of LaNi3. Moreover, the increase of La/Mg ratio brings on a decline of （La,Mg）2Ni7 phase and a rise of LaNi5 and LaNi3 phases. The variation of La/Mg ratio gives rise to an evident change of the electrochemical performances of the alloys. The discharge capacities of the as-cast and the annealed alloys evidently decrease with growing the La/Mg ratio, while the cycle stabilities of the alloys visibly augment under the same condition. Furthermore, the high rate discharge ability （HRD）, the electrochemical impedance spectrum （EIS）, the Tafel polarization curves, and the potential step measurements all indicate that the electrochemical kinetic properties of the alloy electrodes increase with the La/Mg ratio rising.展开更多
ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low ...ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low activation temperature and environmental friendliness.The films were deposited using DC magnetron sputtering with argon and krypton gases under various deposition pressures.The effects of sputtering gas type and pressure on the morphology and hydrogen adsorption performance of ZrCoRE films were investigated.Results show that the films prepared in Ar exhibit a relatively dense structure with fewer grain boundaries.The increase in Ar pressure results in more grain boundaries and gap structures in the films.In contrast,films deposited in Kr display a higher density of grain boundaries and cluster structures,and the films have an obvious columnar crystal structure,with numerous interfaces and gaps distributed between the columnar structures,providing more paths for gas diffusion.As Kr pressure increases,the film demonstrates more pronounced continuous columnar structure growth,accompanied by deeper and wider grain boundaries.This structural configuration provides a larger specific surface area,which significantly improves the hydrogen adsorption speed and capacity.Consequently,high Ar and Kr pressures are beneficial to improve the adsorption performance.展开更多
In the background of carbon neutrality,monolithic ceramic catalysts are universally used in energy conversion and chemical catalysis due to the high heat and mass transfer efficiencies,low bed pressures,and scalabilit...In the background of carbon neutrality,monolithic ceramic catalysts are universally used in energy conversion and chemical catalysis due to the high heat and mass transfer efficiencies,low bed pressures,and scalability through modular design.However,traditional manufacturing processes are limited by mold dependence,organic solvent toxicity,and insufficient molding capability for complex structures,resulting in difficulty achieving precise regulation of cross-scale pores.Additive manufacturing(AM)technology employs a digital layered molding strategy to achieve the cross-scale structural regulation of catalysts from macroscopic flow channels to mesopores and micropores.This paper summarizes recent advances in the structural design of monolithic catalysts enabled by AM technologies and highlights their emerging applications in catalytic processes.Structurally,AM-fabricated monoliths have been effectively employed in key chemical reactions such as fuel reforming,CO_(2)conversion,biofuel synthesis.Strategies such as geometrical topology optimization,multi-scale pore synergy,biomimetic structural design,and functional gradient integration have been utilized to enhance heat and mass transport,reduce pressure drops,and improve overall catalytic performance.By overcoming the limitations of traditional catalysts,AM technologies create a new paradigm for addressing the longstanding challenge of coupling mass transfer with reaction kinetics.This approach provides a feasible pathway for driving both theoretical innovation and practical implementation of high-efficiency catalytic systems.展开更多
Numerical studies have been conducted for low- and medium-rise rocking structures to investigate their efficiency as earthquake-resisting systems in comparison with conventional structures. Several non-linear time-his...Numerical studies have been conducted for low- and medium-rise rocking structures to investigate their efficiency as earthquake-resisting systems in comparison with conventional structures. Several non-linear time-history analyses have been performed to evaluate seismic performance of selected cases at desired ground shaking levels, based on key parameters such as total and flexural story drifts and residual deformations. The Far-field record set is selected as input ground motions and median peak values of key parameters are taken as best estimates of system response. In addition, in order to evaluate the probability of exceeding relevant damage states, analytical fragility curves have been developed based on the results of the incremental dynamic analysis procedure. Small exceedance probabilities and acceptable margins against collapse, together with minor associated damages in main structural members, can be considered as superior seismic performance for medium-rise rocking systems. Low-rise rocking systems could provide significant performance improvement over their conventional counterparts notwithstanding certain weaknesses in their seismic response.展开更多
Noble metal-based intermetallic compounds(IMCs)with ordered atomic arrangements exhibit remarkable electrocatalytic activity owing to their unique crystal and electronic structures.During the past years,great advance ...Noble metal-based intermetallic compounds(IMCs)with ordered atomic arrangements exhibit remarkable electrocatalytic activity owing to their unique crystal and electronic structures.During the past years,great advance has been made in the development of noble metal-based IMCs.Recently,Lu and coworkers reported ultrathin“amorphous/intermetallic”(A/IMC)heterophase PtPbBi nanosheets(NSs)with a thickness of 2.5±0.3 nm.The oxidative etching effect caused by the coexistence of O_(2)and Br^(-)ions plays a crucial role in the formation of the IMC and unique two-dimensional structure with irregular shapes and curled edges.This study shows that fabricating an A/IMC heterophase structure with a multimetallic composition can effectively enhance the catalytic performances of noble metal-based electrocatalysts.展开更多
Benefiting from the low cost and high abundance of potassium resources,K-based batteries have attracted numerous research interest as a more sustainable battery chemist,particularly when considering the enormous deman...Benefiting from the low cost and high abundance of potassium resources,K-based batteries have attracted numerous research interest as a more sustainable battery chemist,particularly when considering the enormous demand for sustainable energy storage while limiting Li sources for Li-based batteries.However,the much larger size of the K-ion usually leads to the serious electrodes'volumetric expansion with rapid capacity fading,making the pursuit of electrodes for potassium storage with high capacity and high stability a significant challenge.The polymer electrode materials have been considered promising materials to address these issues due to their porous characteristics,insolubility in electrolytes,and flexible structural design at a molecular level.In this review,we outline the recent advancements in redox-active polymer electrodes,including anode and cathode,materials for K-based batteries,including crystalline porous coordination polymers,crystalline covalent organic polymers,amorphous polymers,and polymer composites.We discuss the electrode designs,electrochemical performances,and K-ion storage mechanism,with a focus on their structure-function correlations.With this knowledge,we propose the perspectives and challenges in designing advanced polymer electrode materials for K-based batteries.We expect this review will shed light on the further development of reliable polymer electrode materials.展开更多
Through active manipulation of wavelengths,a structure exposed to a water-wave field can achieve a target hydrodynamic performance.Based on the form invariance of the governing equation for shallow water waves,wavelen...Through active manipulation of wavelengths,a structure exposed to a water-wave field can achieve a target hydrodynamic performance.Based on the form invariance of the governing equation for shallow water waves,wavelength modulators have been proposed using the space transformation method,which enables wavelength manipulation by distributing an anisotropic medium that incorporates water depth and gravitational acceleration within the modulation space.First,annular wavelength modulators were designed using the space transformation method to reduce or amplify the wavelength of shallow water waves.The control method of wavelength scaling ratios was investigated.In addition to plane waves,the wavelength modulator was applied to manipulate the wavelength of cylindrical waves.Furthermore,the interactions between a vertical cylinder and modulated water waves were studied.Results indicate that the wavelength can be arbitrarily reduced or amplified by adjusting the dimensional parameters of the modulator.Additionally,the modulator is effective for plane waves and cylindrical waves.This wavelength modulator can enable the structure to achieve the desired scattering characteristics at the target wavelength.展开更多
This paper presents a new type of steel pipe pile wharf connection node.The steel pipe and concrete are connected by ultra-high performance concrete(UHPC)grouting to improve the bonding performance between the concret...This paper presents a new type of steel pipe pile wharf connection node.The steel pipe and concrete are connected by ultra-high performance concrete(UHPC)grouting to improve the bonding performance between the concrete and steel pipe and enhance the mechanical performance of the specimen under earthquake action.A bond test between the steel tube and the concrete was carried out.Considering the interaction between materials,the proposed concrete constitutive model was proposed.The finite element analysis method was used to simulate the structural response of the UHPC grouting connection concrete-filled steel tube(UCFST)beam-pile joint and the normal strength concretefilled steel tube(NCFST)beam-pile joint under earthquake action.The results indicate that the bond performance between the UHPC and the steel tube is stronger.The UCFST specimen has a relatively high bearing capacity and stiffness.When the ratio of the UHPC grouting layer to the component diameter is 0.5,the bearing capacity is the highest.When the ratio is 0.37,the ductility is the highest.When the ratio is 0.25,it combines the advantages of the two situations mentioned above.UCFST specimens have better energy dissipation capacity and damage,which can effectively improve the seismic performance of components.展开更多
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金financially supported by the National Science Fund for Distinguished Young Scholars,China(No.52025041)the National Natural Science Foundation of China(Nos.52450003,U2341267,and 52174294)+1 种基金the National Postdoctoral Program for Innovative Talents,China(No.BX20240437)the Fundamental Research Funds for the Central Universities,China(Nos.FRF-IDRY-23-037 and FRF-TP-20-02C2)。
文摘The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.
基金financially supported by National Natural Science Foundation of China(Grant Nos.12141203,52202083,W2421013)the Natural Science Foundation Project of Shaanxi Province(Grant No.2024JC-YBMS-450)+1 种基金the Sichuan Science and Technology Program(Grant No.2024YFHZ0265)the Open Project of High-end Equipment Advanced Materials and Manufacturing Technology Laboratory(Grant No.2023KFKT0005)。
文摘Designing materials with both structural load-bearing capacity and broadband electromagnetic(EM)wave absorption properties remains a significant challenge.In this work,SiOC/SiC/SiO_(2)composite with gyroid structures were prepared through digital light processing(DLP)3D printing,polymer-derived ceramics(PDCs),chemical vapor infiltration(CVI),and oxidation technologies.The incorporation of the CVISiC phase effectively increases the dissipation capability,while the synergistic interaction between the gyroid structure and SiO_(2)phase significantly improves impedance matching performance.The SiOC/SiC/SiO_(2)composite achieved a minimum reflection loss(RL min)of-62.2 d B at 4.3 mm,and the effective absorption bandwidth(EAB)covered the X-band,with a thickness range of 4.1 mm-4.65 mm.The CST simulation results explain the broadband and low-frequency absorption characteristics,with an EAB of 8.4 GHz(9.6-18 GHz)and an RL min of-21.5 dB at 5 GHz.The excellent EM wave attenuation performance is associated primarily with polarization loss,conduction loss,the gyroid structure's enhancement of multiple reflections and scattering of EM waves,and the resonance effect between the structural units.The SiOC/SiC/SiO_(2)composite also demonstrated strong mechanical properties,with a maximum compressive failure strength of 31.6 MPa in the height direction.This work opens novel prospects for the development of multifunctional structural wave-absorbing materials suitable for broadband microwave absorption and load-bearing properties.
基金The National Key Research and Development Program of China(No.2023YFC3805005)Shanghai Municipal Science and Technology Commission Research Program(No.22DZ1201404).
文摘A buckling-restrained steel plate shear wall(BRSPSW)structure with butterfly-shaped links on the lateral sides is introduced to improve the cooperative perfor-mance between the BRSPSW and the boundary frames.A one-span two-story concrete-filled steel tube(CFT)column frame specimen equipped with lateral-side butterfly-shaped linked BRSPSWs(LBL-BRSPSWs)is evaluated under low-cycle reversed loading.A finite element(FE)model is developed and validated based on the test results.This FE model accurately simulates the failure modes and load-dis-placement curves.Parametric analyses are conducted on the butterfly-shaped links.The results show that the interactions between the CFT column frame and LBL-BRSPSWs are sig-nificantly influenced by the width ratio of the butterfly-shaped links,while the taper ratio and aspect ratio have relatively minor influences.Compared with traditional steel shear walls with four-sided connections,LBL-BRSPSWs reduce the additional axial forces and bending moments in the frame columns by 28%to 73%and 17%to 87%,respectively,with only a 9%to 30%decrease in the lateral resistance.The experimental and parametric analysis results indicate that setting butterfly-shaped links on the lateral sides of BRSPSWs can significantly enhance their cooperative performance with the boundary frame.The butterfly-shaped link width ratio has a linear relationship with the lateral-resistance performance of the specimens and the additional internal forces in the frame columns.To ensure that LBL-BRSPSW fails prior to the column frames,the link width ratio should be optimized.
基金the financial support by the National Nat-ural Science Foundation of China(Nos.52201282,52071281,52371239)the China Postdoctoral Science Foundation(No.2023M742945)+4 种基金Hebei Provincial Postdoctoral Science Foundation(No.B2023003023)the Science Research Project of Hebei Education Department(No.BJK2022033)the Natural Science Foundation of Hebei Province(No.C2022203003)the Inner Mongolia Science and Technology Major Project(No.2020ZD0012)the Baotou Science and Technology Planning Project(No.XM2022BT09).
文摘La-Mg-Ni-based hydrogen storage alloys with superlattice structures are the new generation anode material for nickel metal hydride(Ni-MH)batteries owing to the advantages of high capacity and exceptional activation properties.However,the cycling stability is not currently satisfactory enough which plagues its application.Herein,a strategy of partially substituting La with the Y element is proposed to boost the capacity durability of La-Mg-Ni-based alloys.Furthermore,phase structure regulation is implemented simultaneously to obtain the A5 B19-type alloy with good crystal stability specifically.It is found that Y promotes the phase formation of the Pr5 Co19-type phase after annealing at 985℃.The alloy containing Y contributes to the superior rate capability resulting from the promoted hydrogen diffusion rate.Notably,Y substitution enables strengthening the anti-pulverization ability of the alloy in terms of increasing the volume match between[A_(2)B_(4)]and[AB5]subunits,and effectively enhances the anti-corrosion ability of the alloy due to high electronegativity,realizing improved long-term cycling stability of the alloy from 74.2%to 78.5%after cycling 300 times.The work is expected to shed light on the composition and structure design of the La-Mg-Ni-based hydrogen storage alloy for Ni-MH batteries.
基金National Natural Science Foundation of China(52261032,51861021,51661016)Science and Technology Plan of Gansu Province(21YF5GA074)+2 种基金Public Welfare Project of Zhejiang Natural Science Foundation(LGG22E010008)Wenzhou Basic Public Welfare Scientific Research Project(G2023020)Incubation Program of Excellent Doctoral Dissertation-Lanzhou University of Technology。
文摘The development of high-performance structural and functional materials is vital in many industrial fields.High-and medium-entropy alloys(H/MEAs)with superior comprehensive properties owing to their specific microstructures are promising candidates for structural materials.More importantly,multitudinous efforts have been made to regulate the microstructures and the properties of H/MEAs to further expand their industrial applications.The various heterostructures have enormous potential for the development of H/MEAs with outstanding performance.Herein,multiple heterogeneous structures with single and hierarchical heterogeneities were discussed in detail.Moreover,preparation methods for compositional inhomogeneity,bimodal structures,dualphase structures,lamella/layered structures,harmonic structures(core-shell),multiscale precipitates and heterostructures coupled with specific microstructures in H/MEAs were also systematically reviewed.The deformation mechanisms induced by the different heterostructures were thoroughly discussed to explore the relationship between the heterostructures and the optimized properties of H/MEAs.The contributions of the heterostructures and advanced microstructures to the H/MEAs were comprehensively elucidated to further improve the properties of the alloys.Finally,this review discussed the future challenges of high-performance H/MEAs for industrial applications and provides feasible methods for optimizing heterostructures to enhance the comprehensive properties of H/MEAs.
基金Science and Technology Planning Project of Inner Mongolia Science and Technology Department(2022YFSH0021)Key Research and Development Program of Shaanxi Province(2024SF2-GJHX-14,2021SF-296)。
文摘Four types of Mg-5Zn porous scaffolds with different pore geometries,including body-centered cubic(bcc),the rhombic dodecahedron(RD),gyroid(G),and primitive(P)types,were designed and fabricated using selective laser melting.Their forming quality,compression mechanical properties,and degradation behavior were investigated.Results indicate that the fabricated scaffolds exhibit good dimensional accuracy,and the surface chemical polishing treatment significantly improves the forming quality and reduces porosity error in porous scaffolds.Compared to the ones with rod structures(bcc,RD),the scaffolds with surface structures(G,P)have less powder particle adhesion.The G porous scaffold exhibits the best forming quality for the same design porosity.The predominant failure mode of scaffolds during compression is a 45°shear fracture.At a porosity of 75%,the compression property of all scaffolds meets the compressive property requirements of cancellous bone,while bcc and G structures show relatively better compression property.After immersion in Hank's solution for 168 h,the B-2-75% pore structure scaffold exhibits severe localized corrosion,with fractures in partial pillar connections.In contrast,the G-3-75% pore structure scaffold mainly undergoes uniform corrosion,maintaining structural integrity,and its corrosion rate and loss of compressive properties are less than those of the B-2-75%structure.After comparison,the G-pore structure scaffold is preferred.
基金financially supported by the National Natural Science Foundation of China(Grant No.52104333)the Natural Science Foundation of Inner Mongolia(Grant No.2024MS05029)+1 种基金the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(Grant No.NJYT24070)the Research Project of Carbon Peak and Carbon Neutrality in Universities of Inner Mongolia Autonomous Region(Grant No.STZX202316).
文摘The effect of high welding heat inputs in the range of 50–200 kJ/cm on the microstructural evolution,MX(M=Ti,Nb and V;X=N and C)precipitation and mechanical properties was investigated in the coarse-grained heat-affected zone(CGHAZ)of a high-Nb(0.10 wt.%)structural steel.The results showed that the primary microconstituents varied from lath bainite(LB)to intragranular acicular ferrite(IAF)+intragranular polygonal ferrite(IPF),and the most content of IAF was acquired at 100 kJ/cm.Moreover,the submicron Ti-and Nb-rich MX precipitates not only pinned prior austenite grain boundaries but also facilitated IAF and IPF nucleation with the Kurdjumov–Sachs orientation relationship of[011]_(MX)//[111]_(Ferrite);the nanoscale V-rich MX precipitates hindered dislocation movement and followed the Baker–Nutting orientation relationship of[001]_(MX)//[001]_(Ferrite)with ferrite matrix,synergistically strengthening and toughening the CGHAZ.In addition,the−20℃impact absorbed energy firstly elevated from 93±5.2 J at 50 kJ/cm to 131±5.4 J at 100 kJ/cm and finally decreased to 59±3.0 J at 200 kJ/cm,being related to the IAF content,while the microhardness decreased from 312±26.1 to 269±12.9 HV0.1,because of the coarsened microstructure and the decreased content of LB and martensite.Compared to the CGHAZ properties with 0.05 wt.%Nb,a higher Nb content produced better low-temperature toughness,as more solid dissolved Nb atoms and precipitated Nb-rich MX particles in austenite limited prior austenite grain growth and promoted IAF formation.Furthermore,the welding process at 100 kJ/cm was most applicable for the high-Nb steel.
基金supported by National Natural Science Foundation of China(Nos.12102280,12172238,12332012)Postdoctoral Fellowship Program of CPSF(No.GZB20230473)+1 种基金Support of Ultramicroscopy Research Center(URC,Kyushu University)are highly acknowledged.Yao Chen acknowledges the support of JSPS Fellowship(No.JP22F22720)JSPS KAKENHI(No JP22K03828).
文摘Both solute-segregated long-period stacking ordered(LPSO)structure and stacking faults(SFs)are essential in strengthening rare-earth(RE)Mg alloys.Herein,LPSO-enriched Mg and SFs-enriched Mg are fabricated and comparably investigated for fatigue performances.During fatigue,the Mg nanolayers between LPSO lamellae or SFs act as the gliding channels of dislocations.However,SFs-enriched Mg exhibits outstanding fatigue strength due to solute strengthening within Mg nanolayers.Solute strengthening is assumed to contribute to the local accumulation of basal dislocations and the activation of non-basal dislocations.Dislocations are restricted locally and cannot glide long distances to specimen surfaces,which mitigates fatigue-induced extrusions and slip markings,ultimately leading to an increase in fatigue strength.These findings guide the development of RE-Mg alloys towards a synergy between high tensile and high fatigue performances.
基金supported by the National Natural Science Foundation of China(52301240,52472274)the Fundamental Research Funds for the Provincial Universities of Zhejiang(GK259909299001-022)。
文摘The magnetic refrigeration(MR)based on the principle of magnetocaloric effect(MCE)in magnetic materials was recognized as an alternative cooling way to our present commercialized vapor compression cycle technology.Evidently,a vital prerequisite for practical applications is the exploration of candidate materials with prominent magnetocaloric performances.In this paper,the polycrystalline garnet RE_(3)Al_(5)O_(12)(RE=Tb,Dy and Ho)compounds with the cubic structure(space group:Ia3d)were prepared using the Pechini sol-gel method,and their crystal structure,magnetic properties and comprehensive magnetocaloric performances were studied.The analysis of magnetic susceptibility curves in a static magnetic field H=0.1 T reveal that the Dy_(3)Al_(5)O_(12)undergoes antiferromagnetic transition with Néel temperature TN≈2.6 K,whereas the Tb_(3)Al_(5)O_(12)and Ho_(3)Al_(5)O_(12)exhibit no features indicative of the magnetic ordering processes down to 1.8 K.The comprehensive magnetocaloric performances,namely the maximum magnetic entropy change and relative cooling power,are derived indirectly from the isothermal field-dependent magnetization data,which yield 11.72,10.42,7.53 J/(kg·K)and 84.56,69.52,70.35 J/kg for the Tb_(3)Al_(5)O_(12),Dy_(3)Al_(5)O_(12)and Ho_(3)Al_(5)O_(12)under a low field change(ΔH)of 0-2 T,respectively.The superior comprehensive magnetocaloric performances and wide operating temperature range of these compounds under lowΔH make them attractive for cryogenic MR technology.
基金financially supported by the Liaoning Province Applied Fundamental Research Program (No.2023JH2/101700039)Liaoning Province Natural Science Foundation (No.2023-MSLH-328).
文摘Metallic lattice structures represent advanced architected materials delivering exceptional properties with promising lightweight potential.With the rapid advancement of additive manufacturing,these structures have garnered increasing research interest.However,most metallic lattice structures generally exhibit anisotropic characteristics,which limits their application ranges.Additionally,a limited number of studies have successfully developed precise mechanical models,which have undergone experimental validation,for the purpose of describing the mechanical response exhibited by additively manufactured metallic lattice structures.In this study,Kelvin lattice structures with varying porosities were systematically designed and fabricated using laser powder bed fusion(LPBF)technology.By integrating finite element simulations with experimental characterization,an enhanced mechanical model was developed through a modification of the Gibson-Ashby model,providing an accurate quantitative description of the relationship between porosity and mechanical properties.The results show that the revised mechanical model can accurately describe the relationship between the geometric parameters and properties of metallic lattice structures.Specifically,the designed Kelvin lattice structures exhibit a smooth stress-strain curve with an obvious yield platform,demonstrating isotropic mechanical properties in all the three spatial directions.This enhances their suitability for complex loading conditions.Meanwhile,the microstructure and manufacturing accuracy of the Kelvin lattice structures were observed and analyzed by micro computed tomography.The results show that the fabricated metallic lattice structures achieved precise dimensional control and optimal densification.This study presents the complete process involved in modeling the Kelvin structure,including its conceptualization,manufacturing,implementation,and ultimately,disposal.
基金supported by the National Natural Science Foundation of China(Nos.52101328 and 52171277)the National Key Research and Development Program of China(No.2022YFE0109200)+1 种基金the Foundation of the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(No.2022SZ-TD006)the Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(CPSF)(No.GZB20230653)。
文摘The waterproof performance,mechanical properties,chemical composition,microstructure,and pore structure of hydrophobically-modified geopolymer concrete are investigated before and after dry-wet cycles,to determine the long-term feasibility of using hydrophobically-modified geopolymer concrete in wet environments.We use two types of organic modifying agents:polydimethylsiloxane(PDMS)and sodium methyl siliconate(SMS).The experimental results show that incorporating 2%–6%PDMS or 5%–15%SMS can make the concrete hydrophobic,with water absorption and chloride transport rates decreasing by up to 94.3%.We also analyze the bonding modes of organic molecules and geopolymer gels,as well as their evolution mechanisms during dry-wet cycles.PDMS-modified geopolymer concrete is found to exhibit long-term waterproof performance that is not weakened by dry-wet cycles.This is attributed to the robust combination of organic components and the geopolymer gel skeleton formed through phase cross-linking.Meanwhile,PDMS-modified geopolymer concrete’s hydrophobicity,strength,and microstructure are essentially unaffected.In contrast,SMS-modified geopolymer concrete shows higher water sensitivity,although it does maintain efficient waterproof performance.Due to relatively low binding energy,the dry-wet cycles may lead to the detachment of some SMS molecules from the gel network,which results in a decrease of 18.6%in compressive strength and an increase of 37.6%in total porosity.This work confirms the utility of hydrophobically-modified geopolymer concrete as a building material for long-term service in wet environments,for instance,areas with frequent precipitation,or splash and tidal zones.
基金Projects(51161015,51371094) supported by the National Natural Science Foundation of China
文摘In order to investigate the influences of the stoichiometric ratio of La/Mg （increasing La and decreasing Mg on the same mole ratio） on the structure and electrochemical performances of the La-Mg-Ni-based A2B7-type electrode alloy, the as-cast and the annealed ternary Lao.8＋xMgo.2_xNi3.5 （x=0-0.05） electrode alloys were prepared. The characterization of electrode alloys by X-ray diffraction （XRD） and scanning electron microscopy （SEM） shows that all the as-cast and the annealed alloys hold two major phases of （La,Mg）2Ni7 and LaNi5 as well as a residual phase of LaNi3. Moreover, the increase of La/Mg ratio brings on a decline of （La,Mg）2Ni7 phase and a rise of LaNi5 and LaNi3 phases. The variation of La/Mg ratio gives rise to an evident change of the electrochemical performances of the alloys. The discharge capacities of the as-cast and the annealed alloys evidently decrease with growing the La/Mg ratio, while the cycle stabilities of the alloys visibly augment under the same condition. Furthermore, the high rate discharge ability （HRD）, the electrochemical impedance spectrum （EIS）, the Tafel polarization curves, and the potential step measurements all indicate that the electrochemical kinetic properties of the alloy electrodes increase with the La/Mg ratio rising.
基金National Natural Science Foundation of China(62171208)Natural Science Foundation of Gansu Province(23JRRA1355)。
文摘ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low activation temperature and environmental friendliness.The films were deposited using DC magnetron sputtering with argon and krypton gases under various deposition pressures.The effects of sputtering gas type and pressure on the morphology and hydrogen adsorption performance of ZrCoRE films were investigated.Results show that the films prepared in Ar exhibit a relatively dense structure with fewer grain boundaries.The increase in Ar pressure results in more grain boundaries and gap structures in the films.In contrast,films deposited in Kr display a higher density of grain boundaries and cluster structures,and the films have an obvious columnar crystal structure,with numerous interfaces and gaps distributed between the columnar structures,providing more paths for gas diffusion.As Kr pressure increases,the film demonstrates more pronounced continuous columnar structure growth,accompanied by deeper and wider grain boundaries.This structural configuration provides a larger specific surface area,which significantly improves the hydrogen adsorption speed and capacity.Consequently,high Ar and Kr pressures are beneficial to improve the adsorption performance.
基金supported by the National Natural Science Foundation of China(Grant No.52405414)the China Postdoctoral Science Foundation(Grant No.2024M762580)+1 种基金Young Talent Fund of Xi'an Association for Science and Technology(Grant No.0959202513033)the Youth Innovation Team of Shaanxi Universities,and the Fundamental Research Funds for Central Universities.The authors gratefully acknowledge the support by the Instrumental Analysis Center of Xi’an Jiaotong University for sample characterization.
文摘In the background of carbon neutrality,monolithic ceramic catalysts are universally used in energy conversion and chemical catalysis due to the high heat and mass transfer efficiencies,low bed pressures,and scalability through modular design.However,traditional manufacturing processes are limited by mold dependence,organic solvent toxicity,and insufficient molding capability for complex structures,resulting in difficulty achieving precise regulation of cross-scale pores.Additive manufacturing(AM)technology employs a digital layered molding strategy to achieve the cross-scale structural regulation of catalysts from macroscopic flow channels to mesopores and micropores.This paper summarizes recent advances in the structural design of monolithic catalysts enabled by AM technologies and highlights their emerging applications in catalytic processes.Structurally,AM-fabricated monoliths have been effectively employed in key chemical reactions such as fuel reforming,CO_(2)conversion,biofuel synthesis.Strategies such as geometrical topology optimization,multi-scale pore synergy,biomimetic structural design,and functional gradient integration have been utilized to enhance heat and mass transport,reduce pressure drops,and improve overall catalytic performance.By overcoming the limitations of traditional catalysts,AM technologies create a new paradigm for addressing the longstanding challenge of coupling mass transfer with reaction kinetics.This approach provides a feasible pathway for driving both theoretical innovation and practical implementation of high-efficiency catalytic systems.
基金International Institute of Earthquake Engineering and Seismology(IIEES)under the research project No.7143
文摘Numerical studies have been conducted for low- and medium-rise rocking structures to investigate their efficiency as earthquake-resisting systems in comparison with conventional structures. Several non-linear time-history analyses have been performed to evaluate seismic performance of selected cases at desired ground shaking levels, based on key parameters such as total and flexural story drifts and residual deformations. The Far-field record set is selected as input ground motions and median peak values of key parameters are taken as best estimates of system response. In addition, in order to evaluate the probability of exceeding relevant damage states, analytical fragility curves have been developed based on the results of the incremental dynamic analysis procedure. Small exceedance probabilities and acceptable margins against collapse, together with minor associated damages in main structural members, can be considered as superior seismic performance for medium-rise rocking systems. Low-rise rocking systems could provide significant performance improvement over their conventional counterparts notwithstanding certain weaknesses in their seismic response.
文摘Noble metal-based intermetallic compounds(IMCs)with ordered atomic arrangements exhibit remarkable electrocatalytic activity owing to their unique crystal and electronic structures.During the past years,great advance has been made in the development of noble metal-based IMCs.Recently,Lu and coworkers reported ultrathin“amorphous/intermetallic”(A/IMC)heterophase PtPbBi nanosheets(NSs)with a thickness of 2.5±0.3 nm.The oxidative etching effect caused by the coexistence of O_(2)and Br^(-)ions plays a crucial role in the formation of the IMC and unique two-dimensional structure with irregular shapes and curled edges.This study shows that fabricating an A/IMC heterophase structure with a multimetallic composition can effectively enhance the catalytic performances of noble metal-based electrocatalysts.
基金financially supported by the Guangdong Basic and Applied Basic Research Foundation(Nos.2022B1515020001,2024A1515010277)the National Natural Science Foundation of China(Nos.22109052,52202221)+1 种基金Guangzhou Science and Technology Program(No.2024A04J3899)the Fundamental Research Funds for the Central Universities(No.21624410)。
文摘Benefiting from the low cost and high abundance of potassium resources,K-based batteries have attracted numerous research interest as a more sustainable battery chemist,particularly when considering the enormous demand for sustainable energy storage while limiting Li sources for Li-based batteries.However,the much larger size of the K-ion usually leads to the serious electrodes'volumetric expansion with rapid capacity fading,making the pursuit of electrodes for potassium storage with high capacity and high stability a significant challenge.The polymer electrode materials have been considered promising materials to address these issues due to their porous characteristics,insolubility in electrolytes,and flexible structural design at a molecular level.In this review,we outline the recent advancements in redox-active polymer electrodes,including anode and cathode,materials for K-based batteries,including crystalline porous coordination polymers,crystalline covalent organic polymers,amorphous polymers,and polymer composites.We discuss the electrode designs,electrochemical performances,and K-ion storage mechanism,with a focus on their structure-function correlations.With this knowledge,we propose the perspectives and challenges in designing advanced polymer electrode materials for K-based batteries.We expect this review will shed light on the further development of reliable polymer electrode materials.
基金supported by National Key R&D Program of China(2022YFC3104200)the China Postdoctoral Science Foundation(2023M742157)+3 种基金the Shandong Province Taishan Scholars Project(tsqn201909172)the Shandong Provincial Natural Science Foundation(ZR2023QA097)the Open Research Fund Program of State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology(LP2309)the Innovation Project of Qingdao Post-Doctoral(QDBSH20230202121).
文摘Through active manipulation of wavelengths,a structure exposed to a water-wave field can achieve a target hydrodynamic performance.Based on the form invariance of the governing equation for shallow water waves,wavelength modulators have been proposed using the space transformation method,which enables wavelength manipulation by distributing an anisotropic medium that incorporates water depth and gravitational acceleration within the modulation space.First,annular wavelength modulators were designed using the space transformation method to reduce or amplify the wavelength of shallow water waves.The control method of wavelength scaling ratios was investigated.In addition to plane waves,the wavelength modulator was applied to manipulate the wavelength of cylindrical waves.Furthermore,the interactions between a vertical cylinder and modulated water waves were studied.Results indicate that the wavelength can be arbitrarily reduced or amplified by adjusting the dimensional parameters of the modulator.Additionally,the modulator is effective for plane waves and cylindrical waves.This wavelength modulator can enable the structure to achieve the desired scattering characteristics at the target wavelength.
基金financially supported by the National Key Research and Development Program of China(Grant No.2022YFC3102305)the Taishan Scholar Program of Shandong Province(Grant No.tsqn202211049)the Key Engineering Innovation Project of Shandong Province(Grant No.2019JZZY010301).
文摘This paper presents a new type of steel pipe pile wharf connection node.The steel pipe and concrete are connected by ultra-high performance concrete(UHPC)grouting to improve the bonding performance between the concrete and steel pipe and enhance the mechanical performance of the specimen under earthquake action.A bond test between the steel tube and the concrete was carried out.Considering the interaction between materials,the proposed concrete constitutive model was proposed.The finite element analysis method was used to simulate the structural response of the UHPC grouting connection concrete-filled steel tube(UCFST)beam-pile joint and the normal strength concretefilled steel tube(NCFST)beam-pile joint under earthquake action.The results indicate that the bond performance between the UHPC and the steel tube is stronger.The UCFST specimen has a relatively high bearing capacity and stiffness.When the ratio of the UHPC grouting layer to the component diameter is 0.5,the bearing capacity is the highest.When the ratio is 0.37,the ductility is the highest.When the ratio is 0.25,it combines the advantages of the two situations mentioned above.UCFST specimens have better energy dissipation capacity and damage,which can effectively improve the seismic performance of components.
