The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine s...The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine structure of both the materials inter- faces and interfacial reaction products in semiconductor uperlattice,metal multilayer ceram- ics and composite materials by mean of selected area electron doffraction patterns and high resolution electron microscopy. The following features of interfaces are reviewed:the orientation relationships;the char- acteristic of steps,facets and ronghness of interfaces;atomic bonding across the interface;the degree of coherency,the structure of misfit dislocations and elastic relaxations at the inter- faces:the presence of defects at the onterfaces:the structure of the interfacial reaction prod- ucts as well as the reaction kinetics and reaetion mechanism.展开更多
Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and...Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.展开更多
The lamellar layer of intermetallic compounds(IMCs)was adversely affected the performance of welding-brazing joints in Al/steel dissimilar metals.In this study,a short fiber-like surface morphology was fabricated on t...The lamellar layer of intermetallic compounds(IMCs)was adversely affected the performance of welding-brazing joints in Al/steel dissimilar metals.In this study,a short fiber-like surface morphology was fabricated on the butt surface of Q235 steel via laser.The interaction behavior between the short fibers and the molten pool was captured using a high-speed camera.Laser-arc hybrid welding-brazing was then employed to join Al(6061-T6)to the steel.This process successfully created a short fiber-like interface structure at the joint.The relationship between microstructure and mechanical properties was investigated,compared with Al/bare steel(ABS)joint.The research results indicated that the IMCs layer consisted of FeAl_(3)and Fe_(2)Al_(5).The interface strength of the Al/short fiber-like surface structural steel(ASFSSS)joint reached 153.2 MPa,an 82.2%increase compared to the ABS joint,which reached 84.1 MPa.When the ASFSSS joints without the reinforcement were bent to 58.2°and 25.2°in the longitudinal and transverse direction,respectively,they remained intact.However,cracks were discovered when the bending angle of the ABS reached 39.1°and 0°in the two directions.Numerical simulation revealed that the short fiber-like interface structure significantly reduced residual stress and improved the stress distribution in the weld,thereby enhancing the strength and toughness of Al/steel dissimilar joints.The crack propagation path in the ASFSSS joint was deflected into the weld when it encountered short fibers,and the fracture morphology presented the characteristic of ductile-brittle mixed fracture.展开更多
In order to obtain high-density dual-scale ceramic particles(8.5 wt.%SiC+1.5 wt.%TiC)reinforced Al-Mg Sc-Zr composites with uniform microstructure,50 nm TiC and 7μm SiC particles were pre-dispersed into 15−53μm alum...In order to obtain high-density dual-scale ceramic particles(8.5 wt.%SiC+1.5 wt.%TiC)reinforced Al-Mg Sc-Zr composites with uniform microstructure,50 nm TiC and 7μm SiC particles were pre-dispersed into 15−53μm aluminum alloy powders by low-speed ball milling and mechanical mixing technology,respectively.Then,the effects of laser energy density,power and scanning rate on the density of the composites were investigated based on selective laser melting(SLM)technology.The effect of micron-sized SiC and nano-sized TiC particles on solidification structure,mechanical properties and fracture behaviors of the composites was revealed and analyzed in detail.Interfacial reaction and phase variations in the composites with varying reinforced particles were emphatically considered.Results showed that SiC-TiC particles could significantly improve forming quality and density of the SLMed composites,and the optimal relative density was up to 100%.In the process of laser melting,a strong chemical reaction occurs between SiC and aluminum matrix,and micron-scale acicular Al_(4)SiC_(4) bands were formed in situ.There was no interfacial reaction between TiC particles and aluminum matrix.TiC/Al semi-coherent interface had good bonding strength.Pinning effect of TiC particles in grain boundaries could prevent the equiaxial crystals from growing and transforming into columnar crystals,resulting in grain refinement.The optimal ultimate tensile strength(UTS),yield strength(YS),elongation(EL)and elastic modulus of the SiC-TiC/Al-Mg-Sc-Zr composite were~394 MPa,~262 MPa,~8.2%and~86 GPa,respectively.The fracture behavior of the composites included ductile fracture of Al matrix and brittle cleavage fracture of Al_(4)SiC_(4) phases.A large number of cross-distributed acicular Al_(4)SiC_(4) bands were the main factors leading to premature failure and fracture of SiC-TiC/Al-Mg-Sc-Zr composites.展开更多
Cold-drawn pearlitic steel wire is irreplaceably used in industry owing to its outstanding mechanical property which is dominated by the cementite/ferrite(Fe_(3)C/Fe) interfaces in the material. However, the fine stru...Cold-drawn pearlitic steel wire is irreplaceably used in industry owing to its outstanding mechanical property which is dominated by the cementite/ferrite(Fe_(3)C/Fe) interfaces in the material. However, the fine structures of the Fe3C/Fe interfaces in the deformed wires are less known to date. In this work, transmission electron microscopic investigation was performed on the atomic structures of the interfaces with the Isaichev orientation relationship(OR) in the wires with progressive deformation strains. In addition to the effect of the dislocation/interface interactions, this work revealed that the deformation-induced partial decomposition of cementite plays an important role in the interface reconstruction during deformation. The interfacial carbon vacancies generated by cementite decomposition and particularly, the amorphization of cementite layers in the sample with ε > 1 could effectively annihilated the interfacial dislocations and consequently relaxed the interfacial stress. The correlations between the interface structure changes and the mechanical properties of the wires were discussed.展开更多
Firm joins were obtained between Ti(C,N)-based cermet and steel with Ag-Cu-Zn-Ni filler metal by vacuum brazing.The effects of technological parameters such as brazing temperature,holding time,and filler thickness on ...Firm joins were obtained between Ti(C,N)-based cermet and steel with Ag-Cu-Zn-Ni filler metal by vacuum brazing.The effects of technological parameters such as brazing temperature,holding time,and filler thickness on the shear strength of the joints were investigated.The microstructure of welded area and the reaction products of the filler metal were examined by scanning electron microscopy(SEM),metallographic microscope(OM),energy-dispersive X-ray analysis(EDS),and X-ray diffraction(XRD).The brazing temperature of 870℃,holding time of 15 min,and filler thickness of 0.4 mm are a set of optimum technological parameters,under which the maximum shear strength of the joints,176.5 MPa,is achieved.The results of microstructure show that the wettability of the filler metal on Ti(C,N)-based cermet and steel is well.A mutual solution layer and a diffusion layer exist between the welding base materials and the filler metal.展开更多
The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compar...The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compared with those of BP/7A04 Al matrix composites. The results show that the basalt particles are dispersed in the Al matrix and form a strong bonding interface with the Al matrix. SiO2 at the edge of the basalt particles is continuously replaced by Al2O3 formed in the reaction, forming a high-temperature reaction layer with a thickness of several tens of nanometers, and Al2O3 strengthens the bonding interface between basalt particles and Al matrix. The dispersed basalt particles promote the dislocation multiplication, vacancy formation and precipitation of the matrix, and the precipitated phases mainly consist of plate-like η(MgZn2) phase and bright white band-shaped or ellipsoidal T (Al2Mg3Zn3) phase. The bonding interface, high dislocation density and dispersion strengthening phase significantly improve the mechanical properties of the composites. The yield strength and ultimate tensile strength of BP/7A04 Al matrix composites are up to 665 and 699 MPa, which increase by 11.4% and 10.9% respectively compared with 7A04 Al alloy without basalt particles.展开更多
To design a promising Al−Si filler alloy with a relatively low melting-point,good strength and plasticity for the Cu/Al joint,the Cu,Ni,Zr and Er elements were innovatively added to modify the traditional Al−Si eutect...To design a promising Al−Si filler alloy with a relatively low melting-point,good strength and plasticity for the Cu/Al joint,the Cu,Ni,Zr and Er elements were innovatively added to modify the traditional Al−Si eutectic filler.The microstructure and mechanical properties of filler alloys and Cu/Al joints were investigated.The result indicated that the Al−Si−Ni−Cu filler alloys mainly consisted of Al(s,s),Al_(2)(Cu,Ni)and Si(s,s).The Al−10Si−2Ni−6Cu filler alloy exhibited relatively low solidus(521℃)and liquidus(577℃)temperature,good tensile strength(305.8 MPa)and fracture elongation(8.5%).The corresponding Cu/Al joint brazed using Al−10Si−2Ni−6Cu filler was mainly composed of Al_(8)(Mn,Fe)_(2)Si,Al_(2)(Cu,Ni)3,Al(Cu,Ni),Al_(2)(Cu,Ni)and Al(s,s),yielding a shear strength of(90.3±10.7)MPa.The joint strength was further improved to(94.6±2.5)MPa when the joint was brazed using the Al−10Si−2Ni−6Cu−0.2Er−0.2Zr filler alloy.Consequently,the(Cu,Ni,Zr,Er)-modified Al−Si filler alloy was suitable for obtaining high-quality Cu/Al brazed joints.展开更多
Vacuum diffusion bonding of a TiAl based alloy (TAD) to a titanium alloy (TC2) was carried out at 1 273 K for 15～120 min under a pressure of 25 MPa . The kinds of the reaction products and the interface s...Vacuum diffusion bonding of a TiAl based alloy (TAD) to a titanium alloy (TC2) was carried out at 1 273 K for 15～120 min under a pressure of 25 MPa . The kinds of the reaction products and the interface structures of the joints were investigated by SEM, EPMA and XRD. Based on this, a formation mechanism of the interface structure was elucidated. Experimental and analytical results show that two reaction layers have formed during the diffusion bonding of TAD to TC2. One is Al rich α(Ti)layer adjacent to TC2,and the other is (Ti 3Al+TiAl)layer adjacent to TAD,thus the interface structure of the TAD/TC2 joints is TAD/(Ti 3Al+TiAl)/α(Ti)/TC2.This interface structure forms according to a three stage mechanism,namely(a)the occurrence of a single phase α(Ti)layer;(b)the occurrence of a duplex phase(Ti 3Al+TiAl)layer;and(c)the growth of the α(Ti)and (Ti 3Al+TiAl)layers.展开更多
In this study, TiB 2 cermet and TiAl based alloy are vacuum brazed successfully by using Ag Cu Ti filler metal. The microstructural analyses indicate that two reaction products, Ti(Cu, Al) 2 and Ag based solid so...In this study, TiB 2 cermet and TiAl based alloy are vacuum brazed successfully by using Ag Cu Ti filler metal. The microstructural analyses indicate that two reaction products, Ti(Cu, Al) 2 and Ag based solid solution (Ag(s.s)), are present in the brazing seam, and the interface structure of the brazed joint is TiB 2/TiB 2+ Ag(s.s) /Ag(s.s)+Ti(Cu, Al) 2/Ti(Cu, Al) 2/TiAl. The experimental results show that the shear strength of the brazed TiB 2/TiAl joints decreases as the brazing time increases at a definite brazing temperature. When the joint is brazed at 1 223 K for 5 min , a joint strength up to 173 MPa is achieved.展开更多
For heterogeneous catalysts,the build-up of interface contacts can influence markedly their activities.Being different from the conventional supported metal/oxide catalysts,the reverse type of oxide/metal structures,e...For heterogeneous catalysts,the build-up of interface contacts can influence markedly their activities.Being different from the conventional supported metal/oxide catalysts,the reverse type of oxide/metal structures,e.g.the ceria/Pt composite,have emerged as novel catalytic materials in many fields.However,it remains challenging to determine the optimal interface structure and/or the metal-oxide synergistic effect that can boost catalytic activities.In this work,we conducted density functional theory calculations with on-site Coulomb interaction correction to determine the optimal structures and investigate the physical as well as catalytic properties of various Ce O2/Pt(111)composites containing Ce O2(111)monolayer,bilayer,and trilayer at Pt(111).We found that the interaction strength between Ce O2(111)and Pt(111)substrate first reduces as the ceria slab grows from monolayer to bilayer,and then largely gets converged when the trilayer occurs.Such trend was well rationalized by analyzing the number and distances of O–Pt bonds at the interface.Calculated Bader charges uncovered the significant charge redistribution occurring around the interface,whereas the net electron transfer across the interface is non-significant and decreases as ceria thickness increases.Moreover,comparative calculations on oxygen vacancy formation energies clarified that oxygen removal can be promoted on the Ce O2/Pt(111)composites,especially at the interface.We finally employed CO oxidation as a model reaction to probe the surface reactivity,and determined an intrinsic activity order of monolayer Ce O2(111)>monolayer Ce O2(111)/Pt(111)>regular Ce O2(111).More importantly,we emphasized the significant role of the moderate ceria-Pt interaction at the interface that endows the Ce O2/Pt reverse catalyst both good thermostability and high catalytic activity.The monolayer Ce O2(111)/Pt(111)composite was theoretically predicted highly efficient for catalyzing CO oxidation.展开更多
Novel models （2× 1） of Si（001）-SiO2 interface structure have been established. The method of the first-principle General Gradient Approximation （GGA） is employed to structurally optimize the established the...Novel models （2× 1） of Si（001）-SiO2 interface structure have been established. The method of the first-principle General Gradient Approximation （GGA） is employed to structurally optimize the established theoretical models under the K-point space of periodic boundary condition. The structures after optimization have been analyzed, and the results show that the interfaces present in disordered state and both Si-O-Si and Si=O structures exist. Meanwhile, the bonding of surface structure is analyzed via the graphics of electron localization function（ELF）.展开更多
In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. T...In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.展开更多
The influence of ZnO microstructure on electrical barriers is investigated using capacitance-voltage （C - V）, current-voltage （I- V） and deep level transient spectroscopy （DLTS） measurements. A deep level center...The influence of ZnO microstructure on electrical barriers is investigated using capacitance-voltage （C - V）, current-voltage （I- V） and deep level transient spectroscopy （DLTS） measurements. A deep level center located at Ec - 0.24 eV obtained by DLTS in the ZnO films is an intrinsic defect related to Zni. The surface states in the ZnO grains that have acceptor behavior of capturing electrons from Zni defects result in the formation of grain barriers. In addition, we find that the current transport is dominated by grain barriers after annealing at 600℃ at 02 ambient. With the increment of the annealing temperature, the current transport mechanism of ZnO/Si heterostructure is mainly dominated by thermo-emission.展开更多
For the frequency range of I kHz-lOMHz, the interface state density of Ni contacts on p-GaN is studied using capacitance-voltage （C-V） and conductance-frequency-voltage （G-f-V） measurements at room temperature. To...For the frequency range of I kHz-lOMHz, the interface state density of Ni contacts on p-GaN is studied using capacitance-voltage （C-V） and conductance-frequency-voltage （G-f-V） measurements at room temperature. To obtain the real capacitance and interface state density of the Ni/p-GaN structures, the effects of the series resistance （Rs） on high-frequency （SMHz） capacitance values measured at a reverse and a forward bias are investigated. The mean interface state densities obtained from the CHF-CLF capacitance and the conductance method are 2 ×1012 e V-1 cm-2 and 0.94 × 1012 eV-1 cm-2, respectively. Furthermore, the interface state density derived from the conductance method is higher than that reported from the Ni/n-GaN in the literature, which is ascribed to a poor crystal quality and to a large defect density of the Mg-doped p-GaN.展开更多
The interaction between soil and marine structures like submarine pipeline/pipe pile/suction caisson is a complicated geotechnical mechanism process.In this study,the interface is discretized into multiple mesoscopic ...The interaction between soil and marine structures like submarine pipeline/pipe pile/suction caisson is a complicated geotechnical mechanism process.In this study,the interface is discretized into multiple mesoscopic contact elements that are damaged randomly throughout the shearing process due to the natural heterogeneity.The evolution equation of damage variable is developed based on the Weibull function,which is able to cover a rather wide range of distribution shapes by only two parameters,making it applicable for varying scenarios.Accordingly,a statistical damage model is established by incorporating Mohr–Coulomb strength criterion,in which the interfacial residual strength is considered whereby the strain softening behavior can be described.A concept of“semi-softening”characteristic point on shear stress–displacement curve is proposed for effectively modeling the evolution of strain softening.Finally,a series of ring shear tests of the interfaces between fine sea sand and smooth/rough steel surfaces are conducted.The predicted results using the proposed model are compared with experimental data of this study as well as some results from existing literature,indicating that the model has a good performance in modeling the progressive failure and strain softening behavior for various types of soil–structure interfaces.展开更多
Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorp...Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorption onto Ti02, ultrafast electron injection, hot-electron injection, multiple-exciton generation, and electron-hole recombination. Advanced exper- imental techniques and theoretical approaches are briefly summarized, and then progressive achievements in photovoltaic device optimization based on insights from atomic scale investigations are introduced. Finally, some challenges and oppor- tunities for further improvement of dye solar cells are presented.展开更多
Observation under high resolution electron microscope shows that the continuous bombing of high speed ions produces a great amount of vacant site defects.The assembly of vacancies forms vacant dish,and the collapase o...Observation under high resolution electron microscope shows that the continuous bombing of high speed ions produces a great amount of vacant site defects.The assembly of vacancies forms vacant dish,and the collapase of vacant dish forms stacking fault tetrahedrons and oth- er crystal defects.The interfaces between phase ε(Fe_(2-3)N)and phase γ'(Fe_4N)are smooth, straight and coherent,and they have the orientation relationships of(11)//(0001)and [110]/[110] .展开更多
The effect of In composition on two-dimensional electron gas in wurtzite AlGaN/InGaN heterostructures is theoretically investigated. The sheet carrier density is shown to increase nearly linearly with In mole fraction...The effect of In composition on two-dimensional electron gas in wurtzite AlGaN/InGaN heterostructures is theoretically investigated. The sheet carrier density is shown to increase nearly linearly with In mole fraction x, due to the increase in the polarization charge at the AlGaN/InGaN interface. The electron sheet density is enhanced with the doping in the AlGaN layer. The sheet carrier density is as high as 3.7×1013 cm^-2 at the donor density of 10×1018 cm^-3 for the HEMT structure with x=0.3. The contribution of additional donor density on the electron sheet density is nearly independent of the In mole fraction.展开更多
Fe/C multilayer thin films were deposited by magnetron sputtering. Small angle X-ray diffraction measurements show very well periodicity of the samples. The modulation period determined from a modified Bragg equation ...Fe/C multilayer thin films were deposited by magnetron sputtering. Small angle X-ray diffraction measurements show very well periodicity of the samples. The modulation period determined from a modified Bragg equation agrees well with that determined from deposition rate. The interfacial roughness parameter ξof several samples calculated by X-ray diffraction is between 3.5(?) and 5.6(?).展开更多
文摘The characteristic of interface depending on the atomic structure exerts an inportant,and sometime controlling,influence on performance of the interacial materials. The present paper reviews the main studies on fine structure of both the materials inter- faces and interfacial reaction products in semiconductor uperlattice,metal multilayer ceram- ics and composite materials by mean of selected area electron doffraction patterns and high resolution electron microscopy. The following features of interfaces are reviewed:the orientation relationships;the char- acteristic of steps,facets and ronghness of interfaces;atomic bonding across the interface;the degree of coherency,the structure of misfit dislocations and elastic relaxations at the inter- faces:the presence of defects at the onterfaces:the structure of the interfacial reaction prod- ucts as well as the reaction kinetics and reaetion mechanism.
基金National Natural Science Foundation of China(32201491)Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-1101-02”.
文摘Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.
基金supported by the National Natural Science Foundation of China(No.52275306)the Beijing Municipal Natural Science Foundation(No.3232021).
文摘The lamellar layer of intermetallic compounds(IMCs)was adversely affected the performance of welding-brazing joints in Al/steel dissimilar metals.In this study,a short fiber-like surface morphology was fabricated on the butt surface of Q235 steel via laser.The interaction behavior between the short fibers and the molten pool was captured using a high-speed camera.Laser-arc hybrid welding-brazing was then employed to join Al(6061-T6)to the steel.This process successfully created a short fiber-like interface structure at the joint.The relationship between microstructure and mechanical properties was investigated,compared with Al/bare steel(ABS)joint.The research results indicated that the IMCs layer consisted of FeAl_(3)and Fe_(2)Al_(5).The interface strength of the Al/short fiber-like surface structural steel(ASFSSS)joint reached 153.2 MPa,an 82.2%increase compared to the ABS joint,which reached 84.1 MPa.When the ASFSSS joints without the reinforcement were bent to 58.2°and 25.2°in the longitudinal and transverse direction,respectively,they remained intact.However,cracks were discovered when the bending angle of the ABS reached 39.1°and 0°in the two directions.Numerical simulation revealed that the short fiber-like interface structure significantly reduced residual stress and improved the stress distribution in the weld,thereby enhancing the strength and toughness of Al/steel dissimilar joints.The crack propagation path in the ASFSSS joint was deflected into the weld when it encountered short fibers,and the fracture morphology presented the characteristic of ductile-brittle mixed fracture.
基金Project(2022J318)supported by the Natural Science Foundation of Ningbo,ChinaProject(2021A1515110525)supported by the Guangdong Basic and Applied Basic Research Foundation,ChinaProject(2022QN05023)supported by the Inner Mongolia Natural Science Foundation Youth Project,China。
文摘In order to obtain high-density dual-scale ceramic particles(8.5 wt.%SiC+1.5 wt.%TiC)reinforced Al-Mg Sc-Zr composites with uniform microstructure,50 nm TiC and 7μm SiC particles were pre-dispersed into 15−53μm aluminum alloy powders by low-speed ball milling and mechanical mixing technology,respectively.Then,the effects of laser energy density,power and scanning rate on the density of the composites were investigated based on selective laser melting(SLM)technology.The effect of micron-sized SiC and nano-sized TiC particles on solidification structure,mechanical properties and fracture behaviors of the composites was revealed and analyzed in detail.Interfacial reaction and phase variations in the composites with varying reinforced particles were emphatically considered.Results showed that SiC-TiC particles could significantly improve forming quality and density of the SLMed composites,and the optimal relative density was up to 100%.In the process of laser melting,a strong chemical reaction occurs between SiC and aluminum matrix,and micron-scale acicular Al_(4)SiC_(4) bands were formed in situ.There was no interfacial reaction between TiC particles and aluminum matrix.TiC/Al semi-coherent interface had good bonding strength.Pinning effect of TiC particles in grain boundaries could prevent the equiaxial crystals from growing and transforming into columnar crystals,resulting in grain refinement.The optimal ultimate tensile strength(UTS),yield strength(YS),elongation(EL)and elastic modulus of the SiC-TiC/Al-Mg-Sc-Zr composite were~394 MPa,~262 MPa,~8.2%and~86 GPa,respectively.The fracture behavior of the composites included ductile fracture of Al matrix and brittle cleavage fracture of Al_(4)SiC_(4) phases.A large number of cross-distributed acicular Al_(4)SiC_(4) bands were the main factors leading to premature failure and fracture of SiC-TiC/Al-Mg-Sc-Zr composites.
基金financially supported by the National Natural Science Foundation of China (No. 51501195)the Fund of SYNL。
文摘Cold-drawn pearlitic steel wire is irreplaceably used in industry owing to its outstanding mechanical property which is dominated by the cementite/ferrite(Fe_(3)C/Fe) interfaces in the material. However, the fine structures of the Fe3C/Fe interfaces in the deformed wires are less known to date. In this work, transmission electron microscopic investigation was performed on the atomic structures of the interfaces with the Isaichev orientation relationship(OR) in the wires with progressive deformation strains. In addition to the effect of the dislocation/interface interactions, this work revealed that the deformation-induced partial decomposition of cementite plays an important role in the interface reconstruction during deformation. The interfacial carbon vacancies generated by cementite decomposition and particularly, the amorphization of cementite layers in the sample with ε > 1 could effectively annihilated the interfacial dislocations and consequently relaxed the interfacial stress. The correlations between the interface structure changes and the mechanical properties of the wires were discussed.
基金supported by the National Natural Science Foundation of China(No.50074014)
文摘Firm joins were obtained between Ti(C,N)-based cermet and steel with Ag-Cu-Zn-Ni filler metal by vacuum brazing.The effects of technological parameters such as brazing temperature,holding time,and filler thickness on the shear strength of the joints were investigated.The microstructure of welded area and the reaction products of the filler metal were examined by scanning electron microscopy(SEM),metallographic microscope(OM),energy-dispersive X-ray analysis(EDS),and X-ray diffraction(XRD).The brazing temperature of 870℃,holding time of 15 min,and filler thickness of 0.4 mm are a set of optimum technological parameters,under which the maximum shear strength of the joints,176.5 MPa,is achieved.The results of microstructure show that the wettability of the filler metal on Ti(C,N)-based cermet and steel is well.A mutual solution layer and a diffusion layer exist between the welding base materials and the filler metal.
基金Projects(2019JJ60050,2018JJ3121) supported by the Natural Science Foundation of Hunan Province,ChinaProject(KFBM20170004) supported by the Jiangsu Province Key Laboratory of Materials Surface Science and Technology,China
文摘The microstructures and interface structures of basalt particle reinforced 7A04 Al matrix composites (BP/7A04 Al) were analyzed by using OM, TEM, SEM and EDS, and the mechanical properties of 7A04 Al alloy were compared with those of BP/7A04 Al matrix composites. The results show that the basalt particles are dispersed in the Al matrix and form a strong bonding interface with the Al matrix. SiO2 at the edge of the basalt particles is continuously replaced by Al2O3 formed in the reaction, forming a high-temperature reaction layer with a thickness of several tens of nanometers, and Al2O3 strengthens the bonding interface between basalt particles and Al matrix. The dispersed basalt particles promote the dislocation multiplication, vacancy formation and precipitation of the matrix, and the precipitated phases mainly consist of plate-like η(MgZn2) phase and bright white band-shaped or ellipsoidal T (Al2Mg3Zn3) phase. The bonding interface, high dislocation density and dispersion strengthening phase significantly improve the mechanical properties of the composites. The yield strength and ultimate tensile strength of BP/7A04 Al matrix composites are up to 665 and 699 MPa, which increase by 11.4% and 10.9% respectively compared with 7A04 Al alloy without basalt particles.
基金the financial support from the Primary Research&Development Plan of Zhejiang Province,China(No.2021C01178)the National MCF Energy R&D Program,China(No.2019YFE03100400)+1 种基金the National Natural Science Foundation of China(Nos.51705457,51975530,52005445,52175368)the Natural Science Foundation of Zhejiang Province,China(Nos.LQ21E050015,LQ21E050018).
文摘To design a promising Al−Si filler alloy with a relatively low melting-point,good strength and plasticity for the Cu/Al joint,the Cu,Ni,Zr and Er elements were innovatively added to modify the traditional Al−Si eutectic filler.The microstructure and mechanical properties of filler alloys and Cu/Al joints were investigated.The result indicated that the Al−Si−Ni−Cu filler alloys mainly consisted of Al(s,s),Al_(2)(Cu,Ni)and Si(s,s).The Al−10Si−2Ni−6Cu filler alloy exhibited relatively low solidus(521℃)and liquidus(577℃)temperature,good tensile strength(305.8 MPa)and fracture elongation(8.5%).The corresponding Cu/Al joint brazed using Al−10Si−2Ni−6Cu filler was mainly composed of Al_(8)(Mn,Fe)_(2)Si,Al_(2)(Cu,Ni)3,Al(Cu,Ni),Al_(2)(Cu,Ni)and Al(s,s),yielding a shear strength of(90.3±10.7)MPa.The joint strength was further improved to(94.6±2.5)MPa when the joint was brazed using the Al−10Si−2Ni−6Cu−0.2Er−0.2Zr filler alloy.Consequently,the(Cu,Ni,Zr,Er)-modified Al−Si filler alloy was suitable for obtaining high-quality Cu/Al brazed joints.
文摘Vacuum diffusion bonding of a TiAl based alloy (TAD) to a titanium alloy (TC2) was carried out at 1 273 K for 15～120 min under a pressure of 25 MPa . The kinds of the reaction products and the interface structures of the joints were investigated by SEM, EPMA and XRD. Based on this, a formation mechanism of the interface structure was elucidated. Experimental and analytical results show that two reaction layers have formed during the diffusion bonding of TAD to TC2. One is Al rich α(Ti)layer adjacent to TC2,and the other is (Ti 3Al+TiAl)layer adjacent to TAD,thus the interface structure of the TAD/TC2 joints is TAD/(Ti 3Al+TiAl)/α(Ti)/TC2.This interface structure forms according to a three stage mechanism,namely(a)the occurrence of a single phase α(Ti)layer;(b)the occurrence of a duplex phase(Ti 3Al+TiAl)layer;and(c)the growth of the α(Ti)and (Ti 3Al+TiAl)layers.
文摘In this study, TiB 2 cermet and TiAl based alloy are vacuum brazed successfully by using Ag Cu Ti filler metal. The microstructural analyses indicate that two reaction products, Ti(Cu, Al) 2 and Ag based solid solution (Ag(s.s)), are present in the brazing seam, and the interface structure of the brazed joint is TiB 2/TiB 2+ Ag(s.s) /Ag(s.s)+Ti(Cu, Al) 2/Ti(Cu, Al) 2/TiAl. The experimental results show that the shear strength of the brazed TiB 2/TiAl joints decreases as the brazing time increases at a definite brazing temperature. When the joint is brazed at 1 223 K for 5 min , a joint strength up to 173 MPa is achieved.
文摘For heterogeneous catalysts,the build-up of interface contacts can influence markedly their activities.Being different from the conventional supported metal/oxide catalysts,the reverse type of oxide/metal structures,e.g.the ceria/Pt composite,have emerged as novel catalytic materials in many fields.However,it remains challenging to determine the optimal interface structure and/or the metal-oxide synergistic effect that can boost catalytic activities.In this work,we conducted density functional theory calculations with on-site Coulomb interaction correction to determine the optimal structures and investigate the physical as well as catalytic properties of various Ce O2/Pt(111)composites containing Ce O2(111)monolayer,bilayer,and trilayer at Pt(111).We found that the interaction strength between Ce O2(111)and Pt(111)substrate first reduces as the ceria slab grows from monolayer to bilayer,and then largely gets converged when the trilayer occurs.Such trend was well rationalized by analyzing the number and distances of O–Pt bonds at the interface.Calculated Bader charges uncovered the significant charge redistribution occurring around the interface,whereas the net electron transfer across the interface is non-significant and decreases as ceria thickness increases.Moreover,comparative calculations on oxygen vacancy formation energies clarified that oxygen removal can be promoted on the Ce O2/Pt(111)composites,especially at the interface.We finally employed CO oxidation as a model reaction to probe the surface reactivity,and determined an intrinsic activity order of monolayer Ce O2(111)>monolayer Ce O2(111)/Pt(111)>regular Ce O2(111).More importantly,we emphasized the significant role of the moderate ceria-Pt interaction at the interface that endows the Ce O2/Pt reverse catalyst both good thermostability and high catalytic activity.The monolayer Ce O2(111)/Pt(111)composite was theoretically predicted highly efficient for catalyzing CO oxidation.
基金Supported by the National Grand Fundamental Research 973 Program of China (No. 51310Z07-3) and the Research Program of Application of Sichuan Department of Science and Technology (No. 02GY029-006)
文摘Novel models （2× 1） of Si（001）-SiO2 interface structure have been established. The method of the first-principle General Gradient Approximation （GGA） is employed to structurally optimize the established theoretical models under the K-point space of periodic boundary condition. The structures after optimization have been analyzed, and the results show that the interfaces present in disordered state and both Si-O-Si and Si=O structures exist. Meanwhile, the bonding of surface structure is analyzed via the graphics of electron localization function（ELF）.
基金financially supported by the National Key Basic Research Program of China (No.2010CB226805)the National Natural Science Foundation of China (Nos.51474136 and 51474013)+1 种基金the Opening Project Fund of State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology (No.MDPC2013KF06)the Research Award Fund for the Excellent Youth of Shandong University of Science and Technology (No.2011KYJQ106)
文摘In order to study the failure process of an anchorage structure and the evolution law of the body＇s defor- mation field, anchor push-out tests were carried out based on digital speckle correlation methods （DSCM）. The stress distribution of the anchorage interface was investigated using the particle flow numerical simulation method. The results indicate that there are three stages in the deformation and fail- ure process of an anchorage structure： elastic bonding stage, a de-bonding stage and a failure stage. The stress distribution in the interface controls the stability of the structure. In the elastic bonding stage, the shear stress peak point of the interface is close to the loading end, and the displacement field gradually develops into a ＂V＂ shape, in the de-bonding stage, there is a shear stress plateau in the center of the anchorage section, and shear strain localization begins to form in the deformation field. In the failure stage, the bonding of the interface fails rapidly and the shear stress peak point moves to the anchorage free end. The anchorage structure moves integrally along the macro-cracl~ The de-bonding stage is a research focus in the deformation and failure process of an anchorage structure, and plays an important guiding role in roadway support design and prediction of the stability of the surrounding rock.
基金Supported by the National Natural Science Foundation of China under Grant Nos 50472009, 10474091 and 50532070.
文摘The influence of ZnO microstructure on electrical barriers is investigated using capacitance-voltage （C - V）, current-voltage （I- V） and deep level transient spectroscopy （DLTS） measurements. A deep level center located at Ec - 0.24 eV obtained by DLTS in the ZnO films is an intrinsic defect related to Zni. The surface states in the ZnO grains that have acceptor behavior of capturing electrons from Zni defects result in the formation of grain barriers. In addition, we find that the current transport is dominated by grain barriers after annealing at 600℃ at 02 ambient. With the increment of the annealing temperature, the current transport mechanism of ZnO/Si heterostructure is mainly dominated by thermo-emission.
基金Supported by the Natural Science Foundation of Jiangxi Province under Grant No 20133ACB20005the Key Program of National Natural Science Foundation of China under Grant No 41330318+3 种基金the Key Program of Science and Technology Research of Ministry of Education under Grant No NRE1515the Foundation of Training Academic and Technical Leaders for Main Majors of Jiangxi Province under Grant No 20142BCB22006the Research Foundation of Education Bureau of Jiangxi Province under Grant No GJJ14501the Engineering Research Center of Nuclear Technology Application(East China Institute of Technology)Ministry of Education under Grant NoHJSJYB2016-1
文摘For the frequency range of I kHz-lOMHz, the interface state density of Ni contacts on p-GaN is studied using capacitance-voltage （C-V） and conductance-frequency-voltage （G-f-V） measurements at room temperature. To obtain the real capacitance and interface state density of the Ni/p-GaN structures, the effects of the series resistance （Rs） on high-frequency （SMHz） capacitance values measured at a reverse and a forward bias are investigated. The mean interface state densities obtained from the CHF-CLF capacitance and the conductance method are 2 ×1012 e V-1 cm-2 and 0.94 × 1012 eV-1 cm-2, respectively. Furthermore, the interface state density derived from the conductance method is higher than that reported from the Ni/n-GaN in the literature, which is ascribed to a poor crystal quality and to a large defect density of the Mg-doped p-GaN.
基金financially supported by the China Postdoctoral Science Foundation(Grant No.2023M732997)the National Natural Science Foundation of China(Grant Nos.51890912,52008268)Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering,Hohai University(Grant No.2023007)。
文摘The interaction between soil and marine structures like submarine pipeline/pipe pile/suction caisson is a complicated geotechnical mechanism process.In this study,the interface is discretized into multiple mesoscopic contact elements that are damaged randomly throughout the shearing process due to the natural heterogeneity.The evolution equation of damage variable is developed based on the Weibull function,which is able to cover a rather wide range of distribution shapes by only two parameters,making it applicable for varying scenarios.Accordingly,a statistical damage model is established by incorporating Mohr–Coulomb strength criterion,in which the interfacial residual strength is considered whereby the strain softening behavior can be described.A concept of“semi-softening”characteristic point on shear stress–displacement curve is proposed for effectively modeling the evolution of strain softening.Finally,a series of ring shear tests of the interfaces between fine sea sand and smooth/rough steel surfaces are conducted.The predicted results using the proposed model are compared with experimental data of this study as well as some results from existing literature,indicating that the model has a good performance in modeling the progressive failure and strain softening behavior for various types of soil–structure interfaces.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11222431 and 11074287)the National Basic Key Research Program of China(Grant No.2012CB921403)the Hundred-Talent Program of the Chinese Academy of Sciences
文摘Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorption onto Ti02, ultrafast electron injection, hot-electron injection, multiple-exciton generation, and electron-hole recombination. Advanced exper- imental techniques and theoretical approaches are briefly summarized, and then progressive achievements in photovoltaic device optimization based on insights from atomic scale investigations are introduced. Finally, some challenges and oppor- tunities for further improvement of dye solar cells are presented.
文摘Observation under high resolution electron microscope shows that the continuous bombing of high speed ions produces a great amount of vacant site defects.The assembly of vacancies forms vacant dish,and the collapase of vacant dish forms stacking fault tetrahedrons and oth- er crystal defects.The interfaces between phase ε(Fe_(2-3)N)and phase γ'(Fe_4N)are smooth, straight and coherent,and they have the orientation relationships of(11)//(0001)and [110]/[110] .
文摘The effect of In composition on two-dimensional electron gas in wurtzite AlGaN/InGaN heterostructures is theoretically investigated. The sheet carrier density is shown to increase nearly linearly with In mole fraction x, due to the increase in the polarization charge at the AlGaN/InGaN interface. The electron sheet density is enhanced with the doping in the AlGaN layer. The sheet carrier density is as high as 3.7×1013 cm^-2 at the donor density of 10×1018 cm^-3 for the HEMT structure with x=0.3. The contribution of additional donor density on the electron sheet density is nearly independent of the In mole fraction.
文摘Fe/C multilayer thin films were deposited by magnetron sputtering. Small angle X-ray diffraction measurements show very well periodicity of the samples. The modulation period determined from a modified Bragg equation agrees well with that determined from deposition rate. The interfacial roughness parameter ξof several samples calculated by X-ray diffraction is between 3.5(?) and 5.6(?).
