The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the micro...The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.展开更多
As one of the most important industrially viable methods for carbon dioxide(CO_(2))utilization,methanol synthesis serves as a platform for production of green fuels and commodity chemicals.For sustainable methanol syn...As one of the most important industrially viable methods for carbon dioxide(CO_(2))utilization,methanol synthesis serves as a platform for production of green fuels and commodity chemicals.For sustainable methanol synthesis,In_(2)O_(3)is an ideal catalyst and has garnered significant attention.Herein,cubic In_(2)O_(3)nanoparticles were prepared via the precipitation method and evaluated for CO_(2)hydrogenation to produce methanol.During the initial 10 h of reaction,CO_(2)conversion gradually increased,accompanied by a slow decrease of methanol selectivity,and the reaction reached equilibrium after 10-20 h on stream.This activation and induction stage may be attributed to the sintering of In_(2)O_(3)nanoparticles and the creation of more oxygen vacancies on In_(2)O_(3)surfaces.Further experimental studies demonstrate that hydrogen induction created additional oxygen vacancies during the catalyst activation stage,enhancing the performance of In_(2)O_(3)catalyst for CO_(2)hydrogenation.Density functional theory calculations and microkinetic simulations further demonstrated that surfaces with higher oxygen vacancy coverages or hydroxylated surfaces formed during this induction period can enhance the reaction rate and increase the CO_(2)conversion.However,they predominantly promote the formation of CO instead of methanol,leading to reduced methanol selectivity.These predictions align well with the above-mentioned experimental observations.Our work thus provides an in-depth analysis of the induction stage of the CO_(2)hydrogenation process on In_(2)O_(3)nano-catalyst,and offers valuable insights for significantly improving the CO_(2)reactivity of In_(2)O_(3)-based catalysts while maintaining long-term stability.展开更多
The Longmenshan structural belt on the eastern edge of the Tibetan Plateau experienced the impactful Mw7.92008 Wenchuan Earthquake,causing a 350 km surface rupture.Traditional models attribute this to the Beichuan and...The Longmenshan structural belt on the eastern edge of the Tibetan Plateau experienced the impactful Mw7.92008 Wenchuan Earthquake,causing a 350 km surface rupture.Traditional models attribute this to the Beichuan and Pengguan faults,but our research reveals a complex fault system at the northern end,with inconsistencies in surface rupture,aftershock distribution,and focal mechanisms.We integrate shallow geology,active source seismic reflection,and magnetotelluric profiling to establish a deep structural model for the northern end of the Longmenshan structural belt.This area exhibits dominant reverse thrust nappe tectonics,and analyzing the tectonic evolution history provides insights into deformation propagation from the orogenic belt toward the Sichuan Basin.Focal mechanism analysis and relocated aftershock data reveals two distinct types of seismogenic structures in the northern end of the Longmenshan structural belt.In the middle to northern segments,the reverse fault type is attributed to reactivated pre-existing faults.Conversely,at the northern end,the strike-slip fault type originates from high-angle co-seismic rupture cutting through pre-existing reverse faults.This study enhances our understanding of fault complexity and seismic mechanisms in the northeastern Longmenshan structural belt,providing new insights into regional tectonics.展开更多
1.Introduction Compared with the widely used vapor-compression refrigeration,solid-state cooling based on phase transition offers higher ef-ficiency,environmental friendliness,and smaller volume[1,2].The phase transit...1.Introduction Compared with the widely used vapor-compression refrigeration,solid-state cooling based on phase transition offers higher ef-ficiency,environmental friendliness,and smaller volume[1,2].The phase transition of solid refrigerants can be triggered by external fields,i.e.,magnetic fields[3-5],electric fields[6,7].展开更多
1.Introduction Microbiologically influenced corrosion(MIC)is the destruction of metal materials caused by the activity of microorganisms and the participation of biofilms[1].Global economic costs caused by marine corr...1.Introduction Microbiologically influenced corrosion(MIC)is the destruction of metal materials caused by the activity of microorganisms and the participation of biofilms[1].Global economic costs caused by marine corrosion come to hundreds of billion dollars per year,with approximately 20% of corrosion losses caused by MIC[2].The MIC poses a serious threat to the integrity and safety of assets in the oil and gas industry,water industry,and nuclear waste storage facili-ties[3-5].展开更多
Addressing the kinetic limitations of oxygen evolution reaction(OER)is paramount for advancing rechargeable Zn-air batteries,thus it is extremely urgent to drive the development of effective and affordable electrocata...Addressing the kinetic limitations of oxygen evolution reaction(OER)is paramount for advancing rechargeable Zn-air batteries,thus it is extremely urgent to drive the development of effective and affordable electrocatalysts.This work constructs the interfacial structure of cobalt-iron alloys@phosphates(denoted as CoFe/CoFePO)as OER catalyst through a two-step approach using water-bath and hydrothermal methods,which demonstrated significant OER activity in alkaline media,requiring a low overpotential of 271 mV to achieve 10 mA cm^(−2) and exhibiting a competitive Tafel slope of 65 mV dec^(-1),alongside sustained operational stability.The enhanced performance can be attributed to the improved electrical conductivity due to the participation of CoFe alloys and the increased number of active sites through partial phosphorylation,which synergistically enhances charge transfer processes and accelerates OER kinetics.Moreover,dynamic structural evolution during OER process was thoroughly probed,and the results show that alloys@phosphates gradually evolve into phosphate radicalmodified CoFe hydroxyoxides that act as the actual active phase.Highlighting its practical applicability,the integration of prepared catalyst into zinc-air batteries leads to markedly improved performance,thereby offering promising new strategic directions for the development of next-generation OER electrocatalysts.展开更多
The crystal structure and physical properties of Nb_(25)Mo_(5+x)Re_(35)Ru_(25-x)Rh_(10)(0≤x≤10)and Nb_(5)Mo_(35-y)Re_(15+y)Ru_(35)Rh_(10)(0≤y≤15)high-entropy alloys(HEAs)have been studied by X-ray diffraction,elec...The crystal structure and physical properties of Nb_(25)Mo_(5+x)Re_(35)Ru_(25-x)Rh_(10)(0≤x≤10)and Nb_(5)Mo_(35-y)Re_(15+y)Ru_(35)Rh_(10)(0≤y≤15)high-entropy alloys(HEAs)have been studied by X-ray diffraction,electrical resistivity,magnetic susceptibility,and specific heat measurements.The results show that the former HEAs with valence electron concentration(VEC)values of 6.7-6.9 crystallize in a noncentrosymmetric cubicα-Mn structure,while the latter ones with VEC values of 7.1-7.25 adopt a centrosymmetric hexagonal close-packed(hcp)structure.Despite different structures,both series of HEAs are found to be bulk superconductors with a full energy gap,and the superconducting transition temperature Tc tends to decrease with the increase of VEC.Nevertheless,the Tc values of the hcp-type HEAs are higher than those of theα-Mn-type ones,likely due to a stronger electron phonon coupling.Furthermore,we show that VEC and electronegativity difference are two key parameters to control the stability ofα-Mn and hcp-type HEAs.These results not only are helpful for the design of such HEAs,but also represent the first realization of structurally different HEA superconductors without changing the constituent elements.展开更多
The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reactio...The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.展开更多
The quantitative understanding of how atomic-level catalyst structural changes affect the reactivity of the electrochemical CO_(2)reduction reaction is challenging.Due to the complexity of catalytic systems,convention...The quantitative understanding of how atomic-level catalyst structural changes affect the reactivity of the electrochemical CO_(2)reduction reaction is challenging.Due to the complexity of catalytic systems,conventional in situ X-ray spectroscopy plays a limited role in tracing the underlying dynamic structural changes in catalysts active sites.Herein,operando high-energy resolution fluorescence-detected X-ray absorption spectroscopy was used to precisely identify the dynamic structural transformation of well-defined active sites of a representative model copper(Ⅱ)phthalocyanine catalyst which is of guiding significance in studying single-atom catalysis system.Comprehensive X-ray spectroscopy analyses,including surface sensitive△μspectra which isolates the surface changes by subtracting the disturb of bulk base and X-ray absorption near-edge structure spectroscopy simulation,were used to discover that Cu species aggregated with increasing applied potential,which is responsible for the observed evolution of C_(2)H_(4).The approach developed in this work,characterizing the active-site geometry and dynamic structural change,is a novel and powerful technique to elucidate complex catalytic mechanisms and is expected to con tribute to the rational design of highly effective catalysts.展开更多
Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,w...Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,which is a NW-SE trending structure located in the Western Junggar Basin.The NS-trending faults show an important transpressional phase during the Late Permian,as demonstrated by tectonic stress field and stratigraphic thickness variations.A major compressional thrusting and strike-slip phase during the Late Jurassic created a series of NW-SE faults that originated by the large-scale uplift event in the Northern Tianshan.Faults were reactivated as thrust and dextral strike-slip faults.In addition,the angular unconformity observed between Jurassic and Cretaceous provide evidence of this tectonic event.Lots of normal faults indicate that the area records southward tilting and regional derived extensional stress that took place during the Neogene.Before that,thick Early Cenozoic strata are widely deposited.The balanced cross-section highlights the evolution of stress setting and stratigraphic distribution of the Chepaizi Uplift.展开更多
Layered LiMO_(2)(M=Ni,Co,and Mn) is a type of promising cathode materials for high energy density and high work voltage lithium-ion batteries.However,the poor rate performance and low power density hinder its further ...Layered LiMO_(2)(M=Ni,Co,and Mn) is a type of promising cathode materials for high energy density and high work voltage lithium-ion batteries.However,the poor rate performance and low power density hinder its further applications.The capacity fade is related to the structural transformation in the layered LiMO_(2).In this work,the structural changes of bi-material cathode composed of mesoporous graphene and layered LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)(NCM) were studied via in situ X-ray diffraction(XRD).During different C-rate charge-discharge test at the voltage range of 2.5-4.1 V,the composite cathode of NCM-graphene(NCM-G) reveals better rate performances than pure NCM cathode.The NCM-G composite electrode displays a higher rate capability of 76.7 mAh·g^(-1) at 5 C rate,compared to the pure NCM cathode of 69.8 mAh·g^(-1)discharge capacity.The in situ XRD results indicate that a reversible phase transition from hexagonal H1 to hexagonal H2 occurs in layered NCM material during 1 C chargedischarge process.With the current increasing to 2 C/5 C,the structure of layered NCM material for both electrodes reveals few changes during charge and discharge processes,which indicates the less utilization of NCM component at high C-rates.Hence,the improved rate performance for bi-material electrode is attributed to the highly conductive mesoporous graphene and the synergistic effect of mesoporous graphene and NCM material.展开更多
Developing bifunctional electrocatalysts with both high catalytic activity and high stability is crucial for efficient water splitting in alkaline media.Herein,a Fe-incorporated dual-metal selenide on nickel foam(Co_(...Developing bifunctional electrocatalysts with both high catalytic activity and high stability is crucial for efficient water splitting in alkaline media.Herein,a Fe-incorporated dual-metal selenide on nickel foam(Co_(0.9)Fe_(0.1)-Se/NF) is synthesized via a facile one-step electrodeposition method.As-synthesized materials could serve as self-supported bifunctional electrocatalysts with excellent catalytic activity towards oxygen evolution reaction(OER) and hydrogen evolution reaction(HER) in alkaline media.Experimental results show that delivering a 10 mA cm^(-2) water splitting current density only requires a cell voltage of 1.55 V.In addition,a very stable performance could be kept for about 36 hours,indicating their excellent working stability.Moreover,by means of phase analysis,we have identified that the evolution of the synthesized Co_(0.9)Fe_(0.1)-Se/NF experiences two entirely different processes in HER and OER,which hydroxide and oxyhydroxide are regarded as the real active sites,respectively.This work may pave the way to further understanding the relationships between the reactivity and stability of chalcogenide-based electrocatalysts and facilitating the rational design of efficient electrocatalysts for future renewable energy system applications.展开更多
Under the complex external reaction conditions,uncovering the true structural evolution of the catalyst is of profound significance for the establishment of relevant structure–activity relationships and the rational ...Under the complex external reaction conditions,uncovering the true structural evolution of the catalyst is of profound significance for the establishment of relevant structure–activity relationships and the rational design of electrocatalysts.Here,the surface reconstruction of the catalyst was characterized by ex-situ methods and in-situ Raman spectroscopy in CO_(2)electroreduction.The final results showed that the Bi_(2)O_(3) nanoparticles were transformed into Bi/Bi_(2)O_(3) two-dimensional thin-layer nanosheets(NSs).It is considered to be the active phase in the electrocatalytic process.The Bi/Bi_(2)O_(3) NSs showed good catalytic performance with a Faraday efficiency(FE)of 94.8%for formate and a current density of 26 mA cm^(−2) at−1.01 V.While the catalyst maintained a 90%FE in a wide potential range(−0.91 V to−1.21 V)and long-term stability(24 h).Theoretical calculations support the theory that the excellent performance originates from the enhanced bonding state of surface Bi-Bi,which stabilized the adsorption of the key intermediate OCHO^(∗) and thus promoted the production of formate.展开更多
In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary res...In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary response relationship of the foreland basin to structural evolution: 1) a late Triassic Noric period;2) an early-Middle Jurassic period;3) a late Jurassic to early Cretaceous period;4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well,we analyzed the sedimentary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area,making it a major region for future oil and gas exploration in China’s northern Sichuan basin.展开更多
Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface s...Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.展开更多
Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and exten...Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe展开更多
Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is ...Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is still challenging.Herein,we present a facile ion exchange and phosphating processes to transform intestine-like CoNiP_(x)@P,N-C into lotus pod-like CoNiFeP_(x)@P,N-C heterostructure in which numerous P,N-codoped carboncoated CoNiFeP_(x)nanoparticles tightly anchors on the 2D carbon matrix.Meanwhile,the as-prepared CoNiFeP_(x)@P,N-C enables a core-shell structure,high specific surface area,and hierarchical pore structure,which present abundant heterointerfaces and fully exposed active sites.Notably,the incorporation of Fe can also induce electron transfer in CoNiP_(x)@P,IM-C,thereby promoting the oxygen evolution reaction.Consequently,CoNiFeP_(x)@P,IM-C delivers a low overpotential of 278 mV(vs RHE)at a current density of10 mA cm^(-1)and inherits excellent long-term stability with no observable current density decay after 30 h of chronoamperometry test.This work not only highlights heteroatom induction to tune the electronic structure but also provides a facile approach for developing advanced and stable oxygen evolution reaction electrocatalysts with abundant heterointerfaces.展开更多
China's land institution can be defined broadly or narrowly. By examining the broad definition of the land institution, we found that there were prerequisite, complementary, and substitutional relationships among ...China's land institution can be defined broadly or narrowly. By examining the broad definition of the land institution, we found that there were prerequisite, complementary, and substitutional relationships among the various systems. These relationships were verified through discussion of the structural evolution of each system. Based on these relationships, three methods for quantification were used to measure the regulation intensity and intra-provincial differences in each system among 31 provinces, municipalities, and autonomous regions in China in 2014. The statistics analysis shows that provinces used to pursue outstanding performances in land institution but few provinces could outperform the other provinces in all types of systems. The statistics results also indicate that the provinces which executed land institution earlier often hold significant advantages in institutional innovations but it is still not clear whether they can maintain the advantages. This study recommends that the Chinese government should improve the overall framework of regional land institution based on land systems' relationships and evolutionary patterns. Furthermore, the government should optimize the spatial distribution of regional land institution based on the intra-provincial differences in land-regulation intensity.展开更多
We elucidate the importance of a capping layer on the structural evolution and phase change properties of carbondoped Ge2 Sb2 Te5（C-GST） films during heating in air. Both the C-GST films without and with a thin SiO2...We elucidate the importance of a capping layer on the structural evolution and phase change properties of carbondoped Ge2 Sb2 Te5（C-GST） films during heating in air. Both the C-GST films without and with a thin SiO2 capping layer（C-GST and C-GST/SiO2） are deposited for comparison. Large differences are observed between C-GST and C-GST/SiO2 films in resistance-temperature, x-ray diffraction, x-ray photoelectron spectroscopy,Raman spectra, data retention capability and optical band gap measurements. In the C-GST film, resistancetemperature measurement reveals an unusual smooth decrease in resistance above 110℃ during heating. Xray diffraction result has excluded the possibility of phase change in the C-GST film below 170℃. The x-ray photoelectron spectroscopy experimental result reveals the evolution of Te chemical valence because of the carbon oxidation during heating. Raman spectra further demonstrate that phase changes from an amorphous state to the hexagonal state occur directly during heating in the C-GST film. The quite smooth decrease in resistance is believed to be related with the formation of Te-rich GeTe4-n Gen（n = 0, 1） units above 110℃ in the C-GST film. The oxidation of carbon is harmful to the C-GST phase change properties.展开更多
Structural, electronic, and magnetic properties of AunGd (n = 6-15) small clusters are investigated by using first principles spin polarized calculations and combining with the ab-initio evolutionary structure simulat...Structural, electronic, and magnetic properties of AunGd (n = 6-15) small clusters are investigated by using first principles spin polarized calculations and combining with the ab-initio evolutionary structure simulations. The calculated binding energies indicate that after doping a Gd atom AunGd cluster is obviously more stable than a pure AUn+l cluster. Au6Gd with the quasiplanar structure has a largest magnetic moment of 7.421 gB. The Gd-4f electrons play an important role in determining the high magnetic moments of AunGd clusters, but in Au6Gd and Aul2Gd clusters the unignorable spin polarized effects from the Au-6s and Au-5d electrons further enhance their magnetism. The HOMO-LUMO (here, HOMO and LUMO stand for the highest occupied molecular orbital, and the lowest unoccupied molecular orbital, respectively) energy gaps of munGd clusters are smaller than those of pure AUn+l clusters, indicating that AunGd clusters have potential as new catalysts with enhanced reactivity.展开更多
基金financially supported by the National Science Foundation of China(Nos.51974212 and 52274316)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202116)+1 种基金the Science and Technology Major Project of Wuhan(No.2023020302020572)the Foundation of Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education(No.FMRUlab23-04)。
文摘The utilization of iron coke provides a green pathway for low-carbon ironmaking.To uncover the influence mechanism of iron ore on the behavior and kinetics of iron coke gasification,the effect of iron ore on the microstructure of iron coke was investigated.Furthermore,a comparative study of the gasification reactions between iron coke and coke was conducted through non-isothermal thermogravimetric method.The findings indicate that compared to coke,iron coke exhibits an augmentation in micropores and specific surface area,and the micropores further extend and interconnect.This provides more adsorption sites for CO_(2) molecules during the gasification process,resulting in a reduction in the initial gasification temperature of iron coke.Accelerating the heating rate in non-isothermal gasification can enhance the reactivity of iron coke.The metallic iron reduced from iron ore is embedded in the carbon matrix,reducing the orderliness of the carbon structure,which is primarily responsible for the heightened reactivity of the carbon atoms.The kinetic study indicates that the random pore model can effectively represent the gasification process of iron coke due to its rich pore structure.Moreover,as the proportion of iron ore increases,the activation energy for the carbon gasification gradually decreases,from 246.2 kJ/mol for coke to 192.5 kJ/mol for iron coke 15wt%.
文摘As one of the most important industrially viable methods for carbon dioxide(CO_(2))utilization,methanol synthesis serves as a platform for production of green fuels and commodity chemicals.For sustainable methanol synthesis,In_(2)O_(3)is an ideal catalyst and has garnered significant attention.Herein,cubic In_(2)O_(3)nanoparticles were prepared via the precipitation method and evaluated for CO_(2)hydrogenation to produce methanol.During the initial 10 h of reaction,CO_(2)conversion gradually increased,accompanied by a slow decrease of methanol selectivity,and the reaction reached equilibrium after 10-20 h on stream.This activation and induction stage may be attributed to the sintering of In_(2)O_(3)nanoparticles and the creation of more oxygen vacancies on In_(2)O_(3)surfaces.Further experimental studies demonstrate that hydrogen induction created additional oxygen vacancies during the catalyst activation stage,enhancing the performance of In_(2)O_(3)catalyst for CO_(2)hydrogenation.Density functional theory calculations and microkinetic simulations further demonstrated that surfaces with higher oxygen vacancy coverages or hydroxylated surfaces formed during this induction period can enhance the reaction rate and increase the CO_(2)conversion.However,they predominantly promote the formation of CO instead of methanol,leading to reduced methanol selectivity.These predictions align well with the above-mentioned experimental observations.Our work thus provides an in-depth analysis of the induction stage of the CO_(2)hydrogenation process on In_(2)O_(3)nano-catalyst,and offers valuable insights for significantly improving the CO_(2)reactivity of In_(2)O_(3)-based catalysts while maintaining long-term stability.
基金supported by the National Key Research and Development Project of China(No.2021YFC3000600)。
文摘The Longmenshan structural belt on the eastern edge of the Tibetan Plateau experienced the impactful Mw7.92008 Wenchuan Earthquake,causing a 350 km surface rupture.Traditional models attribute this to the Beichuan and Pengguan faults,but our research reveals a complex fault system at the northern end,with inconsistencies in surface rupture,aftershock distribution,and focal mechanisms.We integrate shallow geology,active source seismic reflection,and magnetotelluric profiling to establish a deep structural model for the northern end of the Longmenshan structural belt.This area exhibits dominant reverse thrust nappe tectonics,and analyzing the tectonic evolution history provides insights into deformation propagation from the orogenic belt toward the Sichuan Basin.Focal mechanism analysis and relocated aftershock data reveals two distinct types of seismogenic structures in the northern end of the Longmenshan structural belt.In the middle to northern segments,the reverse fault type is attributed to reactivated pre-existing faults.Conversely,at the northern end,the strike-slip fault type originates from high-angle co-seismic rupture cutting through pre-existing reverse faults.This study enhances our understanding of fault complexity and seismic mechanisms in the northeastern Longmenshan structural belt,providing new insights into regional tectonics.
基金supported by the National Natural Science Foundation of China(Nos.52371106,52371025,52171154,51871076,52071118,and 52301223)Interdisciplinary Research Foundation of HIT(No.IR2021201)+4 种基金the Natural Science Foundation of Ningbo City(No.2023J346)supported by Zhejiang Provincial Natural Science Foundation of China(No.LQ24E010004)supported by the National Science Foundation(NSF)-Earth Sciences(No.EAR-1634415)the Department of Energy(DOE)-GeoSciences(No.DE-FG02-94ER14466)supported by DOE-BES(No.DE-AC02-06CH11357).
文摘1.Introduction Compared with the widely used vapor-compression refrigeration,solid-state cooling based on phase transition offers higher ef-ficiency,environmental friendliness,and smaller volume[1,2].The phase transition of solid refrigerants can be triggered by external fields,i.e.,magnetic fields[3-5],electric fields[6,7].
基金supported by the National Natural Science Foun-dation of China(Nos.52371071,51971228,and 51771212).
文摘1.Introduction Microbiologically influenced corrosion(MIC)is the destruction of metal materials caused by the activity of microorganisms and the participation of biofilms[1].Global economic costs caused by marine corrosion come to hundreds of billion dollars per year,with approximately 20% of corrosion losses caused by MIC[2].The MIC poses a serious threat to the integrity and safety of assets in the oil and gas industry,water industry,and nuclear waste storage facili-ties[3-5].
基金supported by the National Natural Science Foundation of China(No.52002122).
文摘Addressing the kinetic limitations of oxygen evolution reaction(OER)is paramount for advancing rechargeable Zn-air batteries,thus it is extremely urgent to drive the development of effective and affordable electrocatalysts.This work constructs the interfacial structure of cobalt-iron alloys@phosphates(denoted as CoFe/CoFePO)as OER catalyst through a two-step approach using water-bath and hydrothermal methods,which demonstrated significant OER activity in alkaline media,requiring a low overpotential of 271 mV to achieve 10 mA cm^(−2) and exhibiting a competitive Tafel slope of 65 mV dec^(-1),alongside sustained operational stability.The enhanced performance can be attributed to the improved electrical conductivity due to the participation of CoFe alloys and the increased number of active sites through partial phosphorylation,which synergistically enhances charge transfer processes and accelerates OER kinetics.Moreover,dynamic structural evolution during OER process was thoroughly probed,and the results show that alloys@phosphates gradually evolve into phosphate radicalmodified CoFe hydroxyoxides that act as the actual active phase.Highlighting its practical applicability,the integration of prepared catalyst into zinc-air batteries leads to markedly improved performance,thereby offering promising new strategic directions for the development of next-generation OER electrocatalysts.
基金financial support by the foundation of Westlake Universitysupported by the National Key Research Development Program of China(No.2017YFA0303002)。
文摘The crystal structure and physical properties of Nb_(25)Mo_(5+x)Re_(35)Ru_(25-x)Rh_(10)(0≤x≤10)and Nb_(5)Mo_(35-y)Re_(15+y)Ru_(35)Rh_(10)(0≤y≤15)high-entropy alloys(HEAs)have been studied by X-ray diffraction,electrical resistivity,magnetic susceptibility,and specific heat measurements.The results show that the former HEAs with valence electron concentration(VEC)values of 6.7-6.9 crystallize in a noncentrosymmetric cubicα-Mn structure,while the latter ones with VEC values of 7.1-7.25 adopt a centrosymmetric hexagonal close-packed(hcp)structure.Despite different structures,both series of HEAs are found to be bulk superconductors with a full energy gap,and the superconducting transition temperature Tc tends to decrease with the increase of VEC.Nevertheless,the Tc values of the hcp-type HEAs are higher than those of theα-Mn-type ones,likely due to a stronger electron phonon coupling.Furthermore,we show that VEC and electronegativity difference are two key parameters to control the stability ofα-Mn and hcp-type HEAs.These results not only are helpful for the design of such HEAs,but also represent the first realization of structurally different HEA superconductors without changing the constituent elements.
文摘The commercialization of proton exchange membrane fuel cells(PEMFCs)could provide a cleaner energy society in the near future.However,the sluggish reaction kinetics and harsh conditions of the oxygen reduction reaction affect the durability and cost of PEMFCs.Most previous reports on Pt-based electrocatalyst designs have focused more on improving their activity;however,with the commercialization of PEMFCs,durability has received increasing attention.In-depth insight into the structural evolution of Pt-based electrocatalysts throughout their lifecycle can contribute to further optimization of their activity and durability.The development of in situ electron microscopy and other in situ techniques has promoted the elucidation of the evolution mechanism.This mini review highlights recent advances in the structural evolution of Pt-based electrocatalysts.The mechanisms are adequately discussed,and some methods to inhibit or exploit the structural evolution of the catalysts are also briefly reviewed.
基金supported by the National Natural Science Foundation of China,grant number:U1732267.
文摘The quantitative understanding of how atomic-level catalyst structural changes affect the reactivity of the electrochemical CO_(2)reduction reaction is challenging.Due to the complexity of catalytic systems,conventional in situ X-ray spectroscopy plays a limited role in tracing the underlying dynamic structural changes in catalysts active sites.Herein,operando high-energy resolution fluorescence-detected X-ray absorption spectroscopy was used to precisely identify the dynamic structural transformation of well-defined active sites of a representative model copper(Ⅱ)phthalocyanine catalyst which is of guiding significance in studying single-atom catalysis system.Comprehensive X-ray spectroscopy analyses,including surface sensitive△μspectra which isolates the surface changes by subtracting the disturb of bulk base and X-ray absorption near-edge structure spectroscopy simulation,were used to discover that Cu species aggregated with increasing applied potential,which is responsible for the observed evolution of C_(2)H_(4).The approach developed in this work,characterizing the active-site geometry and dynamic structural change,is a novel and powerful technique to elucidate complex catalytic mechanisms and is expected to con tribute to the rational design of highly effective catalysts.
基金financially supported by the Natural Sciences Foundation of China(Chen S.,grant number 41502208)Science Foundation of China University of Petroleum(Chen S.,grant number 2462017BJB01)CNPC Innovation Foundation(Chen S.,grant number 2017D-5007-0103)
文摘Geological mapping,interpreted cross sections,structural analyses and residual thickness maps were used to characterize the evolution of stress setting,structure and stratigraphic distribution of the Chepaizi Uplift,which is a NW-SE trending structure located in the Western Junggar Basin.The NS-trending faults show an important transpressional phase during the Late Permian,as demonstrated by tectonic stress field and stratigraphic thickness variations.A major compressional thrusting and strike-slip phase during the Late Jurassic created a series of NW-SE faults that originated by the large-scale uplift event in the Northern Tianshan.Faults were reactivated as thrust and dextral strike-slip faults.In addition,the angular unconformity observed between Jurassic and Cretaceous provide evidence of this tectonic event.Lots of normal faults indicate that the area records southward tilting and regional derived extensional stress that took place during the Neogene.Before that,thick Early Cenozoic strata are widely deposited.The balanced cross-section highlights the evolution of stress setting and stratigraphic distribution of the Chepaizi Uplift.
基金financially supported by the National Natural Science Foundation of China(Nos.51822706 and51777200)the Beijing Municipal and Technology Commission(No.Z181100000118006)。
文摘Layered LiMO_(2)(M=Ni,Co,and Mn) is a type of promising cathode materials for high energy density and high work voltage lithium-ion batteries.However,the poor rate performance and low power density hinder its further applications.The capacity fade is related to the structural transformation in the layered LiMO_(2).In this work,the structural changes of bi-material cathode composed of mesoporous graphene and layered LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)(NCM) were studied via in situ X-ray diffraction(XRD).During different C-rate charge-discharge test at the voltage range of 2.5-4.1 V,the composite cathode of NCM-graphene(NCM-G) reveals better rate performances than pure NCM cathode.The NCM-G composite electrode displays a higher rate capability of 76.7 mAh·g^(-1) at 5 C rate,compared to the pure NCM cathode of 69.8 mAh·g^(-1)discharge capacity.The in situ XRD results indicate that a reversible phase transition from hexagonal H1 to hexagonal H2 occurs in layered NCM material during 1 C chargedischarge process.With the current increasing to 2 C/5 C,the structure of layered NCM material for both electrodes reveals few changes during charge and discharge processes,which indicates the less utilization of NCM component at high C-rates.Hence,the improved rate performance for bi-material electrode is attributed to the highly conductive mesoporous graphene and the synergistic effect of mesoporous graphene and NCM material.
基金financial support from the National Natural Science Foundation of China (Grant Nos. 51972191, 51722207)。
文摘Developing bifunctional electrocatalysts with both high catalytic activity and high stability is crucial for efficient water splitting in alkaline media.Herein,a Fe-incorporated dual-metal selenide on nickel foam(Co_(0.9)Fe_(0.1)-Se/NF) is synthesized via a facile one-step electrodeposition method.As-synthesized materials could serve as self-supported bifunctional electrocatalysts with excellent catalytic activity towards oxygen evolution reaction(OER) and hydrogen evolution reaction(HER) in alkaline media.Experimental results show that delivering a 10 mA cm^(-2) water splitting current density only requires a cell voltage of 1.55 V.In addition,a very stable performance could be kept for about 36 hours,indicating their excellent working stability.Moreover,by means of phase analysis,we have identified that the evolution of the synthesized Co_(0.9)Fe_(0.1)-Se/NF experiences two entirely different processes in HER and OER,which hydroxide and oxyhydroxide are regarded as the real active sites,respectively.This work may pave the way to further understanding the relationships between the reactivity and stability of chalcogenide-based electrocatalysts and facilitating the rational design of efficient electrocatalysts for future renewable energy system applications.
基金the National Natural Science Foundation of China(12025503,U1932134,U1867215 and 12105208)the Fundamental Research Funds for the Central Universities(2042021kf0068,2042022kf1181)China Postdoctoral Science Foundation(No.2020M682469)。
文摘Under the complex external reaction conditions,uncovering the true structural evolution of the catalyst is of profound significance for the establishment of relevant structure–activity relationships and the rational design of electrocatalysts.Here,the surface reconstruction of the catalyst was characterized by ex-situ methods and in-situ Raman spectroscopy in CO_(2)electroreduction.The final results showed that the Bi_(2)O_(3) nanoparticles were transformed into Bi/Bi_(2)O_(3) two-dimensional thin-layer nanosheets(NSs).It is considered to be the active phase in the electrocatalytic process.The Bi/Bi_(2)O_(3) NSs showed good catalytic performance with a Faraday efficiency(FE)of 94.8%for formate and a current density of 26 mA cm^(−2) at−1.01 V.While the catalyst maintained a 90%FE in a wide potential range(−0.91 V to−1.21 V)and long-term stability(24 h).Theoretical calculations support the theory that the excellent performance originates from the enhanced bonding state of surface Bi-Bi,which stabilized the adsorption of the key intermediate OCHO^(∗) and thus promoted the production of formate.
基金Projects 40772198 and 50678182 supported by the National Natural Science Foundation of China09-3-094 by the Research Fund for Teaching Reform in Institutes of Higher Learning,Chongqing, China
文摘In order to determine the area for oil and gas exploration in China’s north Sichuan basin,we have divided the time during which the Longmenshan foreland basin was formed into five periods,based on the sedimentary response relationship of the foreland basin to structural evolution: 1) a late Triassic Noric period;2) an early-Middle Jurassic period;3) a late Jurassic to early Cretaceous period;4) a late Cretaceous to Paleogene-Neogene period and 5) the Quaternary period. As well,we analyzed the sedimentary environment and lithologic features of every basin-forming period. The results show that there are several favorable source-reservoir-cap assemblages in our study area,making it a major region for future oil and gas exploration in China’s northern Sichuan basin.
基金supported by the National Basic Research Program of China (No. 2011CB605602)
文摘Polyacrylonitrile （PAN） based carbon fibers with different surface morphology were electrochemically treated in 3 wt% NH4HCO3 aqueous solution with current density up to 3.47 A/m 2 at room temperature, and surface structures, surface morphology and residual mechanical properties were characterized. The crystallite size （La） of carbon fibers would be interrupted due to excessive electrochemical etching, while the crystallite spacing （d（002）） increased as increasing current density. The disordered structures on the surface of carbon fiber with rough surface increased at the initial oxidation stage and then removed by further electrochemical etching, which resulting in continuous increase of the extent of graphitization on the fiber surface. However, the electrochemical etching was beneficial to getting ordered morphology on the surface for carbon fiber with smooth surface, especially when the current density was lower than 1.77 A/m 2 . The tensile strength and tensile modulus could be improved by 17.27% and 5.75%, respectively, and was dependent of surface morphology. The decreasing density of carbon fibers probably resulted from the volume expansion of carbon fibers caused by the abundant oxygen functional groups intercalated between the adjacent graphite layers.
文摘Highly supersaturated nanocrystalline fcc Fe60Cu40 alloy has been prepared by mechanical alloying of elemental powders. The phase transformation is monitored by X-ray diffraction (XRD),Mossbauer spectroscopy and extended X-ray absorption fine structure (EXAFS). The powder obtained after milling is of single fcc structure with grain size of nanometer order. The Mossbauer spectra of the milled powder can be fitted by two subspectra whose hyperfine magnetic fields are 16 MA/m and 20 MA/m while that of pure Fe disappeared. EXAFS results show that the radial structure function (RSF) of Fe K-edge changed drastically and finally became similar to that of reference Cu K-edge, while that of Cu K-edge nearly keeps unchanged in the process of milling. These imply that bcc Fe really transforms to fcc structure and alloying between Fe and Cu occurs truly on an atomic scale. EXAFS results indicate that iron atoms tend to segregate at the boundaries and Cu atoms are rich in the fcc lattice. Annealing experiments show that the Fe atoms at the interfaces are easy to cluster to α-Fe at a lower temperature, whereas the iron atoms in the lattice will form γ-Fe first at temperature above 350℃, and then transform to bcc Fe
基金supported by the National Natural Science Foundation of China(No.22269010)the Jiangxi Provincial Natural Science Foundation(No.20224BAB214021)+3 种基金the Training Program for Academic and Technical Leaders of Major Disciplines in Jiangxi Province(No.20212BCJ23020)the Science and Technology Project of Jiangxi Provincial Department of Education(No.GJJ211305)the Jingdezhen Science and Technology Planning Project(No.20212GYZD009-04)the Graduate Innovation Fund of Jiangxi Province(YC2022-s880)
文摘Transition metal phosphides with metallic properties are a promising candidate for electrocatalytic water oxidation,and developing highly active and stable metal phosphide-based oxygen evolution reaction catalysts is still challenging.Herein,we present a facile ion exchange and phosphating processes to transform intestine-like CoNiP_(x)@P,N-C into lotus pod-like CoNiFeP_(x)@P,N-C heterostructure in which numerous P,N-codoped carboncoated CoNiFeP_(x)nanoparticles tightly anchors on the 2D carbon matrix.Meanwhile,the as-prepared CoNiFeP_(x)@P,N-C enables a core-shell structure,high specific surface area,and hierarchical pore structure,which present abundant heterointerfaces and fully exposed active sites.Notably,the incorporation of Fe can also induce electron transfer in CoNiP_(x)@P,IM-C,thereby promoting the oxygen evolution reaction.Consequently,CoNiFeP_(x)@P,IM-C delivers a low overpotential of 278 mV(vs RHE)at a current density of10 mA cm^(-1)and inherits excellent long-term stability with no observable current density decay after 30 h of chronoamperometry test.This work not only highlights heteroatom induction to tune the electronic structure but also provides a facile approach for developing advanced and stable oxygen evolution reaction electrocatalysts with abundant heterointerfaces.
基金supported by the National Natural Science Foundation of China:[Grant Number:71203054]the MOE(Ministry of Education in China)Liberal arts and Social Sciences Foundation:[Grant Number:17YJA630149]
文摘China's land institution can be defined broadly or narrowly. By examining the broad definition of the land institution, we found that there were prerequisite, complementary, and substitutional relationships among the various systems. These relationships were verified through discussion of the structural evolution of each system. Based on these relationships, three methods for quantification were used to measure the regulation intensity and intra-provincial differences in each system among 31 provinces, municipalities, and autonomous regions in China in 2014. The statistics analysis shows that provinces used to pursue outstanding performances in land institution but few provinces could outperform the other provinces in all types of systems. The statistics results also indicate that the provinces which executed land institution earlier often hold significant advantages in institutional innovations but it is still not clear whether they can maintain the advantages. This study recommends that the Chinese government should improve the overall framework of regional land institution based on land systems' relationships and evolutionary patterns. Furthermore, the government should optimize the spatial distribution of regional land institution based on the intra-provincial differences in land-regulation intensity.
基金Supported by the National Natural Science Foundation of China under Grant No 11704161the Natural Science Foundation of Jiangsu Province under Grant Nos BK20170309 and BK20151172the Changzhou Science and Technology Bureau under Grant Nos CJ20159049 and CJ20160028
文摘We elucidate the importance of a capping layer on the structural evolution and phase change properties of carbondoped Ge2 Sb2 Te5（C-GST） films during heating in air. Both the C-GST films without and with a thin SiO2 capping layer（C-GST and C-GST/SiO2） are deposited for comparison. Large differences are observed between C-GST and C-GST/SiO2 films in resistance-temperature, x-ray diffraction, x-ray photoelectron spectroscopy,Raman spectra, data retention capability and optical band gap measurements. In the C-GST film, resistancetemperature measurement reveals an unusual smooth decrease in resistance above 110℃ during heating. Xray diffraction result has excluded the possibility of phase change in the C-GST film below 170℃. The x-ray photoelectron spectroscopy experimental result reveals the evolution of Te chemical valence because of the carbon oxidation during heating. Raman spectra further demonstrate that phase changes from an amorphous state to the hexagonal state occur directly during heating in the C-GST film. The quite smooth decrease in resistance is believed to be related with the formation of Te-rich GeTe4-n Gen（n = 0, 1） units above 110℃ in the C-GST film. The oxidation of carbon is harmful to the C-GST phase change properties.
基金Project supported by the National Basic Research Program of China(Grant No.2014CB643703)the National Natural Science Foundation of China(Grant Nos.11464008 and 51401060)+1 种基金the Natural Science Foundation of Guangxi Zhuang Autonomous Region,China(Grant Nos.2014GXNSFGA118001 and 2016GXNSFGA380001)the Guangxi Provincial Key Laboratory of Information Materials(Grant Nos.1210908-215-Z and 131022-Z)
文摘Structural, electronic, and magnetic properties of AunGd (n = 6-15) small clusters are investigated by using first principles spin polarized calculations and combining with the ab-initio evolutionary structure simulations. The calculated binding energies indicate that after doping a Gd atom AunGd cluster is obviously more stable than a pure AUn+l cluster. Au6Gd with the quasiplanar structure has a largest magnetic moment of 7.421 gB. The Gd-4f electrons play an important role in determining the high magnetic moments of AunGd clusters, but in Au6Gd and Aul2Gd clusters the unignorable spin polarized effects from the Au-6s and Au-5d electrons further enhance their magnetism. The HOMO-LUMO (here, HOMO and LUMO stand for the highest occupied molecular orbital, and the lowest unoccupied molecular orbital, respectively) energy gaps of munGd clusters are smaller than those of pure AUn+l clusters, indicating that AunGd clusters have potential as new catalysts with enhanced reactivity.
