The phase volume fraction has an important role in the match of the strength and plasticity of dual phase steel.The different bainite contents(18–53 vol.%)in polygonal ferrite and bainite(PF+B)dual phase steel were o...The phase volume fraction has an important role in the match of the strength and plasticity of dual phase steel.The different bainite contents(18–53 vol.%)in polygonal ferrite and bainite(PF+B)dual phase steel were obtained by controlling the relaxation finish temperature during the rolling process.The effect of bainite volume fraction on the tensile deformability was systematically investigated via experiments and crystal plasticity finite element model(CPFEM)simulation.The experimental results showed that the steel showed optimal strain hardenability and strength–plasticity matching when the bainite reached 35%.The 3D-CPFEM models with the same grain size and texture characters were established to clarify the influence of stress/strain distribution on PF+B dual phase steel with different bainite contents.The simulation results indicated that an appropriate increase in the bainite content(18%–35%)did not affect the interphase strain difference,but increased the stress distribution in both phases,as a result of enhancing the coordinated deformability of two phases and improving the strength–plasticity matching.When the bainite content increased to 53%,the stress/strain difference between the two phases was greatly increased,and plastic damage between the two phases was caused by the reduction of the coordinated deformability.展开更多
The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on ...The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.展开更多
With advances in genetic and imaging techniques, investigating axon regeneration after spinal cord injury in vivo is becoming more common in the literature. However, there are many issues to consider when using animal...With advances in genetic and imaging techniques, investigating axon regeneration after spinal cord injury in vivo is becoming more common in the literature. However, there are many issues to consider when using animal models of axon regeneration, including species, strains and injury models. No single particular model suits all types of experiments and each hypothesis being tested requires careful selection of the appropriate animal model. In this review, we describe several commonly-used animal models of axon regeneration in the spinal cord and discuss their advantages and disadvantages.展开更多
The steel-bamboo composite structure is a newly developed structure,combining phyllostachys pubescens(also called Moso bamboo)plywood and cold-formed thin-walled steel with structural adhesive.The reliability of steel...The steel-bamboo composite structure is a newly developed structure,combining phyllostachys pubescens(also called Moso bamboo)plywood and cold-formed thin-walled steel with structural adhesive.The reliability of steelbamboo interface is the premise of composite effect.13 specimens were prepared to investigate the failure modes and mechanism of the steel-bamboo interface on the basis of push-out test,and the strain difference analysis method was proposed to study the distribution of shear stress.The results show that the main failure modes of steel-bamboo interface are adhesion failure and splitting of bamboo plywood.The shear stress is not evenly distributed along the longitudinal direction of the interface,showing a shape of“larger at two ends and smaller in the middle”.The lower end of the interface is the initial location of the interface failure and the shear stress concentration degree is positively correlated with the thickness of the externally bonded bamboo plate.The shear resistance of steel-bamboo interface can be enhanced by improving the adhesion between steel and structural adhesive and ameliorating the quality of bamboo products.展开更多
基金supported by the Project of Liaoning Marine Economic Development(Development of high strength pipeline steel for submarine oil and gas transmission)State Key Laboratory of Metal Material for Marine Equipment and Application Funding(No.SKLMEA-K202205).
文摘The phase volume fraction has an important role in the match of the strength and plasticity of dual phase steel.The different bainite contents(18–53 vol.%)in polygonal ferrite and bainite(PF+B)dual phase steel were obtained by controlling the relaxation finish temperature during the rolling process.The effect of bainite volume fraction on the tensile deformability was systematically investigated via experiments and crystal plasticity finite element model(CPFEM)simulation.The experimental results showed that the steel showed optimal strain hardenability and strength–plasticity matching when the bainite reached 35%.The 3D-CPFEM models with the same grain size and texture characters were established to clarify the influence of stress/strain distribution on PF+B dual phase steel with different bainite contents.The simulation results indicated that an appropriate increase in the bainite content(18%–35%)did not affect the interphase strain difference,but increased the stress distribution in both phases,as a result of enhancing the coordinated deformability of two phases and improving the strength–plasticity matching.When the bainite content increased to 53%,the stress/strain difference between the two phases was greatly increased,and plastic damage between the two phases was caused by the reduction of the coordinated deformability.
基金Project(51775023)supported by the National Natural Science Foundation of ChinaProject(YWF-18-BJ-J-75)supported by the Fundamental Research Funds for the Central Universities,China
文摘The influence of initial groove angle on strain rate inside and outside groove of Ti6Al4V alloy was investigated.Based on the evolution of strain rate inside and outside groove,the effect of strain rate difference on the evolution of normal stress and effective stress inside and outside groove was also analyzed.The results show that when linear loading path changes from uniaxial tension to equi-biaxial tension,the initial groove angle plays a weaker role in the evolution of strain rate in the M-K model.Due to the constraint of force equilibrium between inside and outside groove,the strain rate difference makes the normal stress inside groove firstly decrease and then increase during calculation,which makes the prediction algorithm of forming limit convergent at elevated temperature.The decrease of normal stress inside groove is mainly caused by high temperature softening effect and the rotation of groove,while the increase of normal stress inside groove is mainly due to strain rate hardening effect.
基金supported by NiNDS 1R01NS081040-01,1R21NS082835-01US Army W81XWH1010737+1 种基金The Miami Project to Cure ParalysisBuoniconti Fund
文摘With advances in genetic and imaging techniques, investigating axon regeneration after spinal cord injury in vivo is becoming more common in the literature. However, there are many issues to consider when using animal models of axon regeneration, including species, strains and injury models. No single particular model suits all types of experiments and each hypothesis being tested requires careful selection of the appropriate animal model. In this review, we describe several commonly-used animal models of axon regeneration in the spinal cord and discuss their advantages and disadvantages.
基金supported by National Key R&D Program of China[grant number 2017YFC0703502]the National Natural Science Foundation of China(NSFC)[grant numbers 51978345,51678310 and 51708304]K.C.Wong Magna Fund at the Ningbo University.
文摘The steel-bamboo composite structure is a newly developed structure,combining phyllostachys pubescens(also called Moso bamboo)plywood and cold-formed thin-walled steel with structural adhesive.The reliability of steelbamboo interface is the premise of composite effect.13 specimens were prepared to investigate the failure modes and mechanism of the steel-bamboo interface on the basis of push-out test,and the strain difference analysis method was proposed to study the distribution of shear stress.The results show that the main failure modes of steel-bamboo interface are adhesion failure and splitting of bamboo plywood.The shear stress is not evenly distributed along the longitudinal direction of the interface,showing a shape of“larger at two ends and smaller in the middle”.The lower end of the interface is the initial location of the interface failure and the shear stress concentration degree is positively correlated with the thickness of the externally bonded bamboo plate.The shear resistance of steel-bamboo interface can be enhanced by improving the adhesion between steel and structural adhesive and ameliorating the quality of bamboo products.
