Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age...Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.展开更多
The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order ...The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order to obtain the cyclic curve using experimental data from incremental step tests, four methodologies are described and critically discussed. Three methods differ in the procedure of evaluation of the elastic modulus, while in the last one the experimental data are interpolated with a single non-linear regression. The various techniques were applied to data obtained from tests carried out on stainless steel specimens, and the resulting differences were analysed and quantified. An average behaviour was evaluated considering the total set of data obtained from experimental tests. The choice of the most suitable method is related to both the strain range of interest and the goal for which the results are used.展开更多
Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 m...Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 meter hallway. To meet this need, we developed a 2-minute step test (2MST): stepping up and down an 8 inch step for 2 minutes (1 step = bilateral step up + step down). Purpose: Evaluate the statistical validity, reproducibility, and sensitivity of the 2MST in assessing exercise capacity. Method: We compared the heart rate, oxygen saturation and perceived exertion obtained during performance of 2MST with those obtained during the 6MWT. Results: Comparing 2MST and 6MWT in 158 subjects for validity, r = 0.925 (P Conclusion: The 2MST is valid, reproducible, sensitive, safe, well-tolerated, and is a suitable substitute for the 6MWT.展开更多
Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes th...Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.展开更多
Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed tha...Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.展开更多
Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost...Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost, a double-synchronous-step-stress(DSSS) ALT method which combines a double-synchronous-step-downstress(DSSDS) ALT method and a double-synchronous-step-up-stress(DSSUS) ALT method is proposed. The accelerated stresses decrease and increase in a synchronous way with one step in the DSSDS-ALT and DSSUSALT methods, respectively. Monte Carlo method is adopted to simulate the two methods, and the validity and efficiency of them are demonstrated by the simulation results. In addition, a comparison analysis of efficiency between DSSDS-ALT method and DSSUS-ALT method is carried out. The result shows that the DSSDS-ALT method compared with the DSSUS-ALT method can significantly improve the test efficiency under the same test condition.展开更多
A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yus...A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yushu earthquakes in China. A 1/5 scale ordinary RC frame model and a stepped wall-frame model were subjected to shake table motions together to study the seismic behavior of the new structural system. This paper presents the dynamic characteristics, the seismic responses and the failure and collapse mechanism of the two models under low, moderate and high intensity shaking. The test results and further analysis demonstrate that the seismic performance of stepped wall-frame structures is superior to ordinary RC frames in terms of the well-controlled deformation pattern and more uniformly distributed damage. The stepped wall can effectively suppress the bottom yielding mechanism, and is simple, economical and practical tbr engineering practice.展开更多
Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropr...Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropriate time step before performing a pseudodynamic test. Therefore, a novel parameter of instantaneous degree of nonlinearity is introduced to monitor the stiffness change at the end of a time step, and can thus be used to evaluate numerical and error propagation properties for nonlinear systems. Based on these properties, it is possible to select an appropriate time step to conduct a pseudodynamic test in advance. This possibility is very important in pseudodynamic testing, since the use of an arbitrary time step might lead to unreliable results or even destroy the test specimen. In this paper, guidelines are proposed for choosing an appropriate time step for accurate integration of nonlinear systems. These guidelines require estimation of the maximum instantaneous degree of nonlinearity and the solution of the initial natural frequency. The Newmark explicit method is chosen for this study. All the analytical results and the guidelines proposed are thoroughly confirmed with numerical examples.展开更多
Accelerated life test (ALT) is an important branch of reliability test and is a focus of research both for statisticians and reliability engineers. The paper outlines the four topics of study embodied in ALT: statisti...Accelerated life test (ALT) is an important branch of reliability test and is a focus of research both for statisticians and reliability engineers. The paper outlines the four topics of study embodied in ALT: statistical analysis of constant-stress test, step-stress test and progressive stress test, and optimal design of ALT. It gives a general review of engineering applications of ALT, and points out some possible directions in ALT, gives some suggestions for further study.展开更多
The performance degradation rates of the missile tank are generally time-varying functions uneasily evaluated by general classical evaluation methods. This paper develops a segmented nonlinear accelerated degradation ...The performance degradation rates of the missile tank are generally time-varying functions uneasily evaluated by general classical evaluation methods. This paper develops a segmented nonlinear accelerated degradation model （SNADM） based on the equivalent method of accumulative damage theory, which tackles the problem that product life is difficult to be determined with degradation rate being a function of the variable of time. A segmented expression of the function of population accumulative degradation is derived. And combined with nonlinear function, an accelerated degradation function, i.e., SNADM is obtained. The parameters of the SNADM are identified by numerical iteration, and the statistical function of degradation track is extrapolated. The reliability function is determined through the type of random process of the degradation distribution. Then an evaluation of product storage life is undertaken by combining the statistical function of degradation track, reliability function and threshold. An example of a missile tank undergoes a step-down stress accelerated degradation test （SDSADT）, in which the results with the SNADM and the classical method are evaluated and compared. The technology introduced is validated with the resultant coincidence of both evaluated and field storage lives.展开更多
The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same...The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same value of the determinant of Fisher information matrix. The equivalent test plan of step stress accelerated life testing （SSALT） to a baseline optimum constant stress accelerated life testing （CSALT） plan is obtained by adjusting the censoring time of SSALT and solving the optimization problem for each case to achieve the same value of the determinant of Fisher information matrix as in the baseline optimum CSALT plan. Numer- ical examples are given finally which demonstrate the equivalent SSALT plan to the baseline optimum CSALT plan reduces almost half of the test time while achieving approximately the same estimation errors of model parameters.展开更多
This study was designed to assess the diagnostic value of Rapid Antigen bovine TB antibody test kit (RAT) and any association with cervical comparative tuberculin test (CCTT), (iELISA) and nasal swabs culturing, among...This study was designed to assess the diagnostic value of Rapid Antigen bovine TB antibody test kit (RAT) and any association with cervical comparative tuberculin test (CCTT), (iELISA) and nasal swabs culturing, among based detection of M. bovis infection. A herd of 21 animals aged 1 - 8 years cross bread cattle of college of veterinary medicine. 19 (90.47%) animals had good body condition scores, two bulls included, and 2 (9.52%) cows were fair. Serum samples were collected, analyzed for anti-bovine TB antibody using RAT and iELISA. Also the herd was screened by CCTT. The tests were carried out twice, more than ten month interval, and twelve nasal swabs were taken within second survey. The first survey results revealed prevalence rate: 4 (19.04%) animals considered positive results (one positive and 3 suspected results) for CCTT, while the prevalence rate according to RAT was 10 (47.61%). The difference between the two prevalence rate was significant (McNemar chi-statistic = 4.50, p-value = 0.03) Kappa = 0.215 95% confidence interval: from -0.128 to 0.558;the strength of agreement is considered to be “fair”. The study interprets: sensitivity 30%;specificity 99%. The second survey results revealed prevalence rate according to CCTT was 4 (36.36%), while prevalence rate according to RAT was 5 (45.45%). The difference between the two prevalence was not significant (McNemar chi-statistic = 0.33, p-value = 0.56). Kappa = 0.441 95% confidence interval: from -0.087 to 0.968;the strength of agreement is considered to be “moderate”;sensitivity: 60%;specificity: 83%. All serum samples and nasal swabs gave negative results for iELISA and culturing respectively. The study concluded that RAT was highly specific, easy, labor and time saving, suggesting its use as screening test in bovine tuberculosis, and CCTT could be used to confirm positive animals screened by RAT, while there was no association between RAT, CCTT with body condition scores, iELISA and nasal swabs culture results.展开更多
In general,simple subsystems like series or parallel are integrated to produce a complex hybrid system.The reliability of a system is determined by the reliability of its constituent components.It is often extremely d...In general,simple subsystems like series or parallel are integrated to produce a complex hybrid system.The reliability of a system is determined by the reliability of its constituent components.It is often extremely difficult or impossible to get specific information about the component that caused the system to fail.Unknown failure causes are instances in which the actual cause of systemfailure is unknown.On the other side,thanks to current advanced technology based on computers,automation,and simulation,products have become incredibly dependable and trustworthy,and as a result,obtaining failure data for testing such exceptionally reliable items have become a very costly and time-consuming procedure.Therefore,because of its capacity to produce rapid and adequate failure data in a short period of time,accelerated life testing(ALT)is the most utilized approach in the field of product reliability and life testing.Based on progressively hybrid censored(PrHC)data froma three-component parallel series hybrid system that failed to owe to unknown causes,this paper investigates a challenging problem of parameter estimation and reliability assessment under a step stress partially accelerated life-test(SSPALT).Failures of components are considered to follow a power linear hazard rate(PLHR),which can be used when the failure rate displays linear,decreasing,increasing or bathtub failure patterns.The Tempered random variable(TRV)model is considered to reflect the effect of the high stress level used to induce early failure data.The maximum likelihood estimation(MLE)approach is used to estimate the parameters of the PLHR distribution and the acceleration factor.A variance covariance matrix(VCM)is then obtained to construct the approximate confidence intervals(ACIs).In addition,studentized bootstrap confidence intervals(ST-B CIs)are also constructed and compared with ACIs in terms of their respective interval lengths(ILs).Moreover,a simulation study is conducted to demonstrate the performance of the estimation procedures and the methodology discussed in this paper.Finally,real failure data from the air conditioning systems of an airplane is used to illustrate further the performance of the suggested estimation technique.展开更多
If a traditional explicit numerical integration algorithm is used to solve motion equation in the finite element simulation of wave motion, the time-step used by numerical integration is the smallest time-step restric...If a traditional explicit numerical integration algorithm is used to solve motion equation in the finite element simulation of wave motion, the time-step used by numerical integration is the smallest time-step restricted by the stability criterion in computational region. However, the excessively small time-step is usually unnecessary for a large portion of computational region. In this paper, a varying time-step explicit numerical integration algorithm is introduced, and its basic idea is to use different time-step restricted by the stability criterion in different computational region. Finally, the feasibility of the algorithm and its effect on calculating precision are verified by numerical test.展开更多
文摘Introduction:Rotatory chair testing has been used to evaluate horizontal canal function.Frequently used tests include sinusoidal harmonic acceleration test(SHAT)and velocity step test(VST).Objectives:Assessment of age effect on the SHAT and VST and assessment of test-retest reliability of the parameters of those two tests.Methods:A prospective study was performed on 100 subjects with no ear or vestibular complaints and normal vestibular evaluation.They were divided into two groups;Group A:below 50 years of age and Group B:50 years of age or above.SHAT was presented at frequencies 0.02,0.04,0.08,0.16,0.32,0.64 Hz with a peak velocity of 60°/s.VST was performed using a maximum velocity of 100°/s with acceleration and deceleration of 200°/s2.Thirty subjects were tested twice to assess reliability.Results:Study participants ranged in age from 20 to 67 years.Regarding group A,the mean age was30.92±7.31 and 55.36±4.61 for group B.No significant differences were found in SHAT parameters between the two groups.As well,there was no significant difference in VST per-rotatory time constant,however,post-rotatory time constant was significantly longer for Group B(P value<0.05).Intraclass correlation coefficient(ICC)values showed moderate to good reliability(ICC 0.5800.818)for SHAT parameters for the lower frequencies and indicated moderate reliability for VST time constant(ICC 0.5090.652).Conclusions:Age has no significant effect on the parameters of SHAT and VST.Test-retest reliability is generally good for both tests.
文摘The design of structural components in low-cycle fatigue field often requires the knowledge of the cyclic properties of the material, which are commonly described by the classical relation of Ramberg-Osgood. In order to obtain the cyclic curve using experimental data from incremental step tests, four methodologies are described and critically discussed. Three methods differ in the procedure of evaluation of the elastic modulus, while in the last one the experimental data are interpolated with a single non-linear regression. The various techniques were applied to data obtained from tests carried out on stainless steel specimens, and the resulting differences were analysed and quantified. An average behaviour was evaluated considering the total set of data obtained from experimental tests. The choice of the most suitable method is related to both the strain range of interest and the goal for which the results are used.
文摘Introduction: Although many cardiopulmonary patients require home care services, the 6-minute walk test (6MWT) is unusable in most dwellings for objectively evaluating exercise capacity because it requires a 20 - 30 meter hallway. To meet this need, we developed a 2-minute step test (2MST): stepping up and down an 8 inch step for 2 minutes (1 step = bilateral step up + step down). Purpose: Evaluate the statistical validity, reproducibility, and sensitivity of the 2MST in assessing exercise capacity. Method: We compared the heart rate, oxygen saturation and perceived exertion obtained during performance of 2MST with those obtained during the 6MWT. Results: Comparing 2MST and 6MWT in 158 subjects for validity, r = 0.925 (P Conclusion: The 2MST is valid, reproducible, sensitive, safe, well-tolerated, and is a suitable substitute for the 6MWT.
文摘Through the failure mechanism analysi s and simulation test of a certain kind of detonator,this paper confirms the str ess level of the stepping stress acceleration life test of the detonator,and t hen e stablishes the data processing mathematical model and storage life forecasting m ethod.At last,according to the result of the stepping stress acceleration lif e test of the detonator,this paper forecasts the reliable storage life of the detonator under the normal stress level.
基金supported by the National Natural Science Foundation of China(71401134 71571144+1 种基金 71171164)the Program of International Cooperation and Exchanges in Science and Technology Funded by Shaanxi Province(2016KW-033)
文摘Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality criteria.Finally, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.
基金the National Natural Science Foundation of China(Nos.51265025 and 51665029)
文摘Double-crossed-step-stress(DCSS) accelerated life test(ALT) method is widely used for estimating the lifetime of products with high reliability and long lifetime. In order to further reduce the test time and test cost, a double-synchronous-step-stress(DSSS) ALT method which combines a double-synchronous-step-downstress(DSSDS) ALT method and a double-synchronous-step-up-stress(DSSUS) ALT method is proposed. The accelerated stresses decrease and increase in a synchronous way with one step in the DSSDS-ALT and DSSUSALT methods, respectively. Monte Carlo method is adopted to simulate the two methods, and the validity and efficiency of them are demonstrated by the simulation results. In addition, a comparison analysis of efficiency between DSSDS-ALT method and DSSUS-ALT method is carried out. The result shows that the DSSDS-ALT method compared with the DSSUS-ALT method can significantly improve the test efficiency under the same test condition.
基金Special Fund for Earthquake Research under Grant No.201208013National key Technology R&D Program under Grant No.2012BAK15B05Basic Research Fund of Institute of Engineering Mechanics,CEA under Grant No.2010A04
文摘A new structural system called a stepped wall-frame structure is proposed in this study to solve the bottom yielding problem of RC frames, which widely occurred during previous earthquakes such as thc Wcnchuan and Yushu earthquakes in China. A 1/5 scale ordinary RC frame model and a stepped wall-frame model were subjected to shake table motions together to study the seismic behavior of the new structural system. This paper presents the dynamic characteristics, the seismic responses and the failure and collapse mechanism of the two models under low, moderate and high intensity shaking. The test results and further analysis demonstrate that the seismic performance of stepped wall-frame structures is superior to ordinary RC frames in terms of the well-controlled deformation pattern and more uniformly distributed damage. The stepped wall can effectively suppress the bottom yielding mechanism, and is simple, economical and practical tbr engineering practice.
基金supported by the NSC,Chinese Taipei,Under Grant No.NSC-95-2221-E-027-099
文摘Although the step degree of nonlinearity has been introduced to conduct basic analysis and error propagation analysis for the pseudodynamic testing of nonlinear systems, it cannot be reliably used to select an appropriate time step before performing a pseudodynamic test. Therefore, a novel parameter of instantaneous degree of nonlinearity is introduced to monitor the stiffness change at the end of a time step, and can thus be used to evaluate numerical and error propagation properties for nonlinear systems. Based on these properties, it is possible to select an appropriate time step to conduct a pseudodynamic test in advance. This possibility is very important in pseudodynamic testing, since the use of an arbitrary time step might lead to unreliable results or even destroy the test specimen. In this paper, guidelines are proposed for choosing an appropriate time step for accurate integration of nonlinear systems. These guidelines require estimation of the maximum instantaneous degree of nonlinearity and the solution of the initial natural frequency. The Newmark explicit method is chosen for this study. All the analytical results and the guidelines proposed are thoroughly confirmed with numerical examples.
文摘Accelerated life test (ALT) is an important branch of reliability test and is a focus of research both for statisticians and reliability engineers. The paper outlines the four topics of study embodied in ALT: statistical analysis of constant-stress test, step-stress test and progressive stress test, and optimal design of ALT. It gives a general review of engineering applications of ALT, and points out some possible directions in ALT, gives some suggestions for further study.
文摘The performance degradation rates of the missile tank are generally time-varying functions uneasily evaluated by general classical evaluation methods. This paper develops a segmented nonlinear accelerated degradation model （SNADM） based on the equivalent method of accumulative damage theory, which tackles the problem that product life is difficult to be determined with degradation rate being a function of the variable of time. A segmented expression of the function of population accumulative degradation is derived. And combined with nonlinear function, an accelerated degradation function, i.e., SNADM is obtained. The parameters of the SNADM are identified by numerical iteration, and the statistical function of degradation track is extrapolated. The reliability function is determined through the type of random process of the degradation distribution. Then an evaluation of product storage life is undertaken by combining the statistical function of degradation track, reliability function and threshold. An example of a missile tank undergoes a step-down stress accelerated degradation test （SDSADT）, in which the results with the SNADM and the classical method are evaluated and compared. The technology introduced is validated with the resultant coincidence of both evaluated and field storage lives.
文摘The optimum design of equivalent accelerated life testing plan based on proportional hazards-proportional odds model using D-optimality is presented. The defined equivalent test plan is the test plan that has the same value of the determinant of Fisher information matrix. The equivalent test plan of step stress accelerated life testing （SSALT） to a baseline optimum constant stress accelerated life testing （CSALT） plan is obtained by adjusting the censoring time of SSALT and solving the optimization problem for each case to achieve the same value of the determinant of Fisher information matrix as in the baseline optimum CSALT plan. Numer- ical examples are given finally which demonstrate the equivalent SSALT plan to the baseline optimum CSALT plan reduces almost half of the test time while achieving approximately the same estimation errors of model parameters.
文摘This study was designed to assess the diagnostic value of Rapid Antigen bovine TB antibody test kit (RAT) and any association with cervical comparative tuberculin test (CCTT), (iELISA) and nasal swabs culturing, among based detection of M. bovis infection. A herd of 21 animals aged 1 - 8 years cross bread cattle of college of veterinary medicine. 19 (90.47%) animals had good body condition scores, two bulls included, and 2 (9.52%) cows were fair. Serum samples were collected, analyzed for anti-bovine TB antibody using RAT and iELISA. Also the herd was screened by CCTT. The tests were carried out twice, more than ten month interval, and twelve nasal swabs were taken within second survey. The first survey results revealed prevalence rate: 4 (19.04%) animals considered positive results (one positive and 3 suspected results) for CCTT, while the prevalence rate according to RAT was 10 (47.61%). The difference between the two prevalence rate was significant (McNemar chi-statistic = 4.50, p-value = 0.03) Kappa = 0.215 95% confidence interval: from -0.128 to 0.558;the strength of agreement is considered to be “fair”. The study interprets: sensitivity 30%;specificity 99%. The second survey results revealed prevalence rate according to CCTT was 4 (36.36%), while prevalence rate according to RAT was 5 (45.45%). The difference between the two prevalence was not significant (McNemar chi-statistic = 0.33, p-value = 0.56). Kappa = 0.441 95% confidence interval: from -0.087 to 0.968;the strength of agreement is considered to be “moderate”;sensitivity: 60%;specificity: 83%. All serum samples and nasal swabs gave negative results for iELISA and culturing respectively. The study concluded that RAT was highly specific, easy, labor and time saving, suggesting its use as screening test in bovine tuberculosis, and CCTT could be used to confirm positive animals screened by RAT, while there was no association between RAT, CCTT with body condition scores, iELISA and nasal swabs culture results.
文摘In general,simple subsystems like series or parallel are integrated to produce a complex hybrid system.The reliability of a system is determined by the reliability of its constituent components.It is often extremely difficult or impossible to get specific information about the component that caused the system to fail.Unknown failure causes are instances in which the actual cause of systemfailure is unknown.On the other side,thanks to current advanced technology based on computers,automation,and simulation,products have become incredibly dependable and trustworthy,and as a result,obtaining failure data for testing such exceptionally reliable items have become a very costly and time-consuming procedure.Therefore,because of its capacity to produce rapid and adequate failure data in a short period of time,accelerated life testing(ALT)is the most utilized approach in the field of product reliability and life testing.Based on progressively hybrid censored(PrHC)data froma three-component parallel series hybrid system that failed to owe to unknown causes,this paper investigates a challenging problem of parameter estimation and reliability assessment under a step stress partially accelerated life-test(SSPALT).Failures of components are considered to follow a power linear hazard rate(PLHR),which can be used when the failure rate displays linear,decreasing,increasing or bathtub failure patterns.The Tempered random variable(TRV)model is considered to reflect the effect of the high stress level used to induce early failure data.The maximum likelihood estimation(MLE)approach is used to estimate the parameters of the PLHR distribution and the acceleration factor.A variance covariance matrix(VCM)is then obtained to construct the approximate confidence intervals(ACIs).In addition,studentized bootstrap confidence intervals(ST-B CIs)are also constructed and compared with ACIs in terms of their respective interval lengths(ILs).Moreover,a simulation study is conducted to demonstrate the performance of the estimation procedures and the methodology discussed in this paper.Finally,real failure data from the air conditioning systems of an airplane is used to illustrate further the performance of the suggested estimation technique.
基金National Natural Science Foundation of China (50178065), 973 Program (2002CB412706), National Social Com-monweal Research Foundation (2002DIB30076) and Joint Seismological Science Foundation (101066).
文摘If a traditional explicit numerical integration algorithm is used to solve motion equation in the finite element simulation of wave motion, the time-step used by numerical integration is the smallest time-step restricted by the stability criterion in computational region. However, the excessively small time-step is usually unnecessary for a large portion of computational region. In this paper, a varying time-step explicit numerical integration algorithm is introduced, and its basic idea is to use different time-step restricted by the stability criterion in different computational region. Finally, the feasibility of the algorithm and its effect on calculating precision are verified by numerical test.
