期刊文献+
共找到126篇文章
< 1 2 7 >
每页显示 20 50 100
Rapid State Augmentation for Compressed EKF-Based Simultaneous Localization and Mapping 被引量:1
1
作者 窦丽华 张海强 +1 位作者 陈杰 方浩 《Journal of Beijing Institute of Technology》 EI CAS 2009年第2期192-197,共6页
A new method for speeding up the state augment operations involved in the compressed extended Kalman filter-based simultaneous localization and mapping (CEKF-SLAM) algorithm was proposed. State augment usually requi... A new method for speeding up the state augment operations involved in the compressed extended Kalman filter-based simultaneous localization and mapping (CEKF-SLAM) algorithm was proposed. State augment usually requires a fully-updated state eovariance so as to append the information of newly observed landmarks, thus computational volume increases quadratically with the number of landmarks in the whole map. It was proved that state augment can also be achieved by augmenting just one auxiliary coefficient ma- trix. This method can yield identical estimation results as those using EKF-SLAM algorithm, and computa- tional amount grows only linearly with number of increased landmarks in the local map. The efficiency of this quick state augment for CEKF-SLAM algorithm has been validated by a sophisticated simulation project. 展开更多
关键词 simultaneous localization and mapping (SLAM) extended Kalman filter state augment compu- tational volume
在线阅读 下载PDF
Unpower aerocraft augmented state feedback tracking guaranteed cost control
2
作者 Xu Jiansheng Wu Hao Wang Yongji 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2008年第1期125-130,共6页
Aimed at designing the unpower aerocraft attitude control system in a simple and practical way, the guaranteed cost control is adopted. To eliminate the steady-error, a novel tracking control approach--augmented state... Aimed at designing the unpower aerocraft attitude control system in a simple and practical way, the guaranteed cost control is adopted. To eliminate the steady-error, a novel tracking control approach--augmented state feedback tracking guaranteed cost control is proposed. Firstly, the unpower aerocraft is modeled as a linear system with norm bounded parameter uncertain, then the linear matrix inequality based state feedback guaranteed cost control law is combined with the augmented state feedback tracking control from a new point of view. The sufficient condition of the existence of the augmented state feedback tracking guaranteed cost control is derived and converted to the feasible problem of the linear matrix inequality. Finally, the proposed approach is applied to a specified unpower aerocraft. The six dimensions of freedom simulation results show that the proposed approach is effective and feasible. 展开更多
关键词 robust control tracking guaranteed cost control augmented state unpower aerocraft
在线阅读 下载PDF
Maneuvering target state estimation based on separate model-ing of target trajectory shape and dynamic characteristics 被引量:2
3
作者 ZHANG Zhuanhua ZHOU Gongjian 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2022年第5期1195-1209,共15页
The state estimation of a maneuvering target,of which the trajectory shape is independent on dynamic characteristics,is studied.The conventional motion models in Cartesian coordinates imply that the trajectory of a ta... The state estimation of a maneuvering target,of which the trajectory shape is independent on dynamic characteristics,is studied.The conventional motion models in Cartesian coordinates imply that the trajectory of a target is completely determined by its dynamic characteristics.However,this is not true in the applications of road-target,sea-route-target or flight route-target tracking,where target trajectory shape is uncoupled with target velocity properties.In this paper,a new estimation algorithm based on separate modeling of target trajectory shape and dynamic characteristics is proposed.The trajectory of a target over a sliding window is described by a linear function of the arc length.To determine the unknown target trajectory,an augmented system is derived by denoting the unknown coefficients of the function as states in mileage coordinates.At every estimation cycle except the first one,the interaction(mixing)stage of the proposed algorithm starts from the latest estimated base state and a recalculated parameter vector,which is determined by the least squares(LS).Numerical experiments are conducted to assess the performance of the proposed algorithm.Simulation results show that the proposed algorithm can achieve better performance than the conventional coupled model-based algorithms in the presence of target maneuvers. 展开更多
关键词 maneuvering target tracking separate modeling natural parametric function interacting multiple model(IMM)filter data fitting state augmentation
在线阅读 下载PDF
Nonlinear state estimation for fermentation process using cubature Kalman filter to incorporate delayed measurements 被引量:1
4
作者 赵利强 王建林 +2 位作者 于涛 陈坤云 刘唐江 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2015年第11期1801-1810,共10页
State estimation of biological process variables directly influences the performance of on-line monitoring and op- timal control for fermentation process. A novel nonlinear state estimation method for fermentation pro... State estimation of biological process variables directly influences the performance of on-line monitoring and op- timal control for fermentation process. A novel nonlinear state estimation method for fermentation process is proposed using cubature Kalman filter (CKF) to incorporate delayed measurements. The square-root version of CI(F (SCKF) algorithm is given and the system with delayed measurements is described. On this basis, the sample-state augmentation method for the SCKF algorithm is provided and the implementation of the proposed algorithm is constructed. Then a nonlinear state space model for fermentation process is established and the SCKF algorithm incorporating delayed measurements based on fermentation process model is presented to implement the nonlinear state estimation. Finally, the proposed nonlinear state estimation methodology is applied to the state estimation for penicillin and industrial yeast fermentation processes. The simulation results show that the on-fine state estimation for fermentation process can be achieved by the proposed method with higher esti- mation accuracy and better stability. 展开更多
关键词 Nonlinear state estimationFermentation processCubature Kalman filterDelayed measurementsSample-state augmentation
在线阅读 下载PDF
Simultaneous state and actuator fault estimation for satellite attitude control systems 被引量:9
5
作者 Cheng Yao Wang Rixin +1 位作者 Xu Minqiang Li Yuqing 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2016年第3期714-721,共8页
In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performance... In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The mance in estimating states and actuator faults. It also successfully. simulation results show satisfactory perfor- shows that multiple faults can be estimated 展开更多
关键词 Actuator fault estimation augmented state observer Fault diagnosis Lipschitz nonlinear systemSatellite attitude controlsystem
原文传递
Retraction control of motorized seat belt system with linear state observer 被引量:3
6
作者 LEE Kang-seok CHOI Chin-chul LEE Woo-taik 《Journal of Central South University》 SCIE EI CAS 2013年第2期385-392,共8页
A design and verification of linear state observers which estimate state information such as angular velocity and load torque for retraction control of the motorized seat belt (MSB) system were described. The motorize... A design and verification of linear state observers which estimate state information such as angular velocity and load torque for retraction control of the motorized seat belt (MSB) system were described. The motorized seat belt system provides functions to protect passengers and improve passenger's convenience. Each MSB function has its own required belt tension which is determined by the function's purpose. To realize the MSB functions, state information, such as seat belt winding velocity and seat belt tension are required. Using a linear state observer, the state information for MSB operations can be estimated without sensors. To design the linear state observer, the motorized seat belt system is analyzed and represented as a state space model which contains load torque as an augmented state. Based on the state space model, a linear state observer was designed and verified by experiments. Also, the retraction control of the MSB algorithm using linear state observer was designed and verified on the test bench. With the designed retraction control algorithm using the linear state observer, it is possible to realize various types of MSB functions. 展开更多
关键词 motorized seat belt system motorized seat belt (MSB) system linear state observer state space model augmented state retraction control
在线阅读 下载PDF
对话状态追踪模型的数据增强方法研究
7
作者 刘舒曼 冯洋 《中文信息学报》 北大核心 2025年第4期96-104,共9页
对话状态追踪模型能够支持任务型对话系统识别任务相关的槽位值。然而,由于标注难度大、领域多样化,对话状态追踪模型常面临训练语料稀少和类别难度不均衡等问题。为了解决这些问题,该文提出了使用数据增强的方法。针对类别难度不均衡问... 对话状态追踪模型能够支持任务型对话系统识别任务相关的槽位值。然而,由于标注难度大、领域多样化,对话状态追踪模型常面临训练语料稀少和类别难度不均衡等问题。为了解决这些问题,该文提出了使用数据增强的方法。针对类别难度不均衡问题,该文使用局部噪声强化槽位值的多样性,加强模型学习槽位无关对话结构的能力;针对训练语料稀少问题,该文根据语料中由槽位结构构成的任务逻辑序列,通过采样生成逻辑合法的槽位值序列,增强语料逻辑多样性,增加语料数量。该文方法在数据集上经对比和分析实验,能显著缓解对话状态追踪模型中存在的类别难度不均衡和语料稀少问题。 展开更多
关键词 对话状态追踪 数据增强 类别难度不均衡
在线阅读 下载PDF
面向低感知度三相配电网的数据增强状态估计 被引量:1
8
作者 王续卓 李正烁 +1 位作者 邢家维 赵洺哲 《中国电机工程学报》 北大核心 2025年第15期5942-5951,I0015,共11页
由于量测设备的稀缺和通信基础设施的不足,配电网的量测覆盖率较低、可观测性较差,削弱了配电网状态估计的准确性。为了克服配电网可观测性差的问题,增强状态估计效果,该文提出一种面向低感知度三相配电网的数据增强状态估计方法。首先... 由于量测设备的稀缺和通信基础设施的不足,配电网的量测覆盖率较低、可观测性较差,削弱了配电网状态估计的准确性。为了克服配电网可观测性差的问题,增强状态估计效果,该文提出一种面向低感知度三相配电网的数据增强状态估计方法。首先,提出一种基于矩阵补全的配电网量测数据增强方法,根据模块度指标进行量测矩阵分块,对多个量测矩阵分别进行分块分相矩阵补全,该方法提高了在大规模系统中的矩阵补全计算效率;然后,提出融合数据增强信息的三相配电网抗差状态估计方法,重点解决生成量测权重系数难以确定的问题;最后,分别在三相不平衡和三相平衡配电系统中进行测试,验证所提方法的有效性和实用性。算例结果表明,所提方法能够有效补全量测矩阵,提高配电网状态估计精度。 展开更多
关键词 低感知度配电网 状态估计 数据增强 三相不平衡 低可观测性
原文传递
多传感器时延下井工矿无轨胶轮车轨迹跟踪控制
9
作者 谭震 崔祥 +4 位作者 高永军 加保瑞 高亮 曹宇翔 杜毅博 《工矿自动化》 北大核心 2025年第4期120-130,共11页
井工矿无人驾驶系统通常采用基于视觉和激光雷达传感器的SLAM算法进行场景重建和车辆定位。但井下环境粉尘密度大、照明条件差,复杂的基于感知的定位算法会有显著的计算时延,而且井下车辆大多采用改装解决方案,不可避免地存在执行器时... 井工矿无人驾驶系统通常采用基于视觉和激光雷达传感器的SLAM算法进行场景重建和车辆定位。但井下环境粉尘密度大、照明条件差,复杂的基于感知的定位算法会有显著的计算时延,而且井下车辆大多采用改装解决方案,不可避免地存在执行器时延。上述因素会产生累积效应,因此有必要研究多传感器时延下井工矿无轨胶轮车轨迹跟踪控制。构建了车辆横向控制动力学模型,提出了2种建模方法来分析时延对车辆动力学控制稳定性的影响,一种是状态增广建模方法,另一种是基于构造Lyapunov泛函的方法。利用CarSim和Simulink构建井下车辆轨迹跟踪控制仿真测试环境,仿真结果表明,在关注相对于参考轨迹的平均跟踪距离误差时,需要限制感知算法的时延和定位标准差;当存在与安全相关的最大跟踪距离误差约束时,应优先考虑感知算法的时延要求。 展开更多
关键词 井下自动驾驶 井下无轨胶轮车 轨迹跟踪控制 时延 LYAPUNOV泛函 状态增广建模 定位标准差
在线阅读 下载PDF
基于Vision Mamba和增强原型的小样本图像分类方法
10
作者 方鸿清 骆水才 +2 位作者 马小强 刘家辉 巢建树 《微电子学与计算机》 2025年第6期75-85,共11页
小样本学习的目标是模仿人类通过有限的样例迅速掌握新技能的能力。当前,大多数小样本学习方法主要侧重于开发复杂的元学习算法,这些算法往往局限于特定领域,泛化能力较弱。尽管采用如Vision Transformer和Swin ViT这类大型网络架构的... 小样本学习的目标是模仿人类通过有限的样例迅速掌握新技能的能力。当前,大多数小样本学习方法主要侧重于开发复杂的元学习算法,这些算法往往局限于特定领域,泛化能力较弱。尽管采用如Vision Transformer和Swin ViT这类大型网络架构的元学习算法在性能上取得了显著提升,但在计算资源受限的实际应用场景中,模型的规模和计算资源需求可能成为应用的瓶颈。为解决这些挑战,提出了一种基于Vision Mamba和增强原型的小样本图像分类方法(Vision Mamba and Augmented Prototype Network, VMAPN)。首先,引入新型视觉主干网络Vision Mamba(ViM)作为特征编码器。ViM通过双向状态空间模型,实现数据的全局视觉上下文关联,它具有与ViT相当的建模能力,同时在计算复杂度和推理速度上更为优越。其次,通过对ViM进行掩码图像建模预训练,探索不同预训练策略下Vim在小样本学习中的应用潜力。最后,将ViM提取的特征送入增强原型网络,通过提取类相关的局部块特征并将其整合到类别标记特征中,为每个类别生成更精确的原型。在4个基准小样本数据集上的实验结果显示,VMAPN方法展现出了良好的效果,验证了该方法的有效性,为小样本图像分类任务提供一种新的可行方案。 展开更多
关键词 小样本学习 图像分类 状态空间模型 增强原型
在线阅读 下载PDF
基于态靶理论应用加味蒌贝二陈汤治疗气滞痰瘀型肺结节伴焦虑抑郁的疗效观察
11
作者 赵榕 田小亚 牛彩琴 《川北医学院学报》 2025年第1期62-67,共6页
目的:探讨基于态靶理论应用加味蒌贝二陈汤治疗气滞痰瘀型肺结节(PN)伴焦虑抑郁的疗效。方法:选取80例气滞痰瘀型PN合并焦虑抑郁的患者为研究对象,根据治疗方案不同分为治疗组和对照组,每组各40例。对照组患者给予舒肝解郁胶囊治疗;治... 目的:探讨基于态靶理论应用加味蒌贝二陈汤治疗气滞痰瘀型肺结节(PN)伴焦虑抑郁的疗效。方法:选取80例气滞痰瘀型PN合并焦虑抑郁的患者为研究对象,根据治疗方案不同分为治疗组和对照组,每组各40例。对照组患者给予舒肝解郁胶囊治疗;治疗组患者给予舒肝解郁胶囊+加味蒌贝二陈汤治疗,疗程均为3个月。比较两组患者临床疗效、治疗前及治疗3个月后心理状态[抑郁自评量表(SDS)及焦虑自评量表(SAS)评分]、中医证候积分、中医证候疗效及不良反应发生情况。结果:治疗3个月后,治疗组患者结节最大直径缩小且小于对照组(P<0.05)。两组患者治疗后的临床疗效有统计学差异,且治疗组患者临床总有效率高于对照组(47.50%vs.17.5%,P<0.05)。治疗3个月后,两组患者SAS、SDS及中医症候积分均降低,且治疗组低于对照组(P<0.05);两组患者治疗后的中医证候疗效有统计学差异,且治疗组患者中医证候疗效总有效率高于对照组(P<0.05)。两组患者不良反应发生率比较,差异无统计学意义(P>0.05)。结论:基于态靶理论应用加味蒌贝二陈汤治疗PN伴焦虑抑郁的效果好,且用药安全,值得进一步推广。 展开更多
关键词 态靶辨证 肺结节 焦虑抑郁 加味蒌贝二陈汤 回顾性分析
暂未订购
传递对准中测量延迟的补偿方法 被引量:21
12
作者 扈光锋 王艳东 范跃祖 《中国惯性技术学报》 EI CSCD 2005年第1期10-14,20,共6页
采用“速度+姿态”匹配方式,提出了一种解决传递对准中主惯导数据测量延迟现象的方法。该方法将主惯导数据测量延迟时间扩展为卡尔曼滤波器的一个状态变量,并同时考虑了测量延迟时间对速度和姿态测量量的影响。在主惯导数据存在测量延... 采用“速度+姿态”匹配方式,提出了一种解决传递对准中主惯导数据测量延迟现象的方法。该方法将主惯导数据测量延迟时间扩展为卡尔曼滤波器的一个状态变量,并同时考虑了测量延迟时间对速度和姿态测量量的影响。在主惯导数据存在测量延迟的情况下,推导了速度、姿态测量方程,最后对提出的方法进行了仿真。仿真结果表明,该方法可以加快滤波器的收敛速度,提高传递对准的对准精度。 展开更多
关键词 导数 延迟时间 收敛速度 推导 状态变量 数据测量 方程 对准精度 匹配方式 滤波器
在线阅读 下载PDF
北斗双星/SINS组合导航实时滤波方法 被引量:7
13
作者 扈光锋 马小艳 +1 位作者 王艳东 范跃祖 《弹箭与制导学报》 CSCD 北大核心 2005年第2期39-41,44,共4页
在北斗双星/SINS组合导航系统中,通过将双星定位延迟时间Δt扩充为卡尔曼滤波器的一个状态,提出并实现了一种处理北斗双星定位延迟现象的滤波方法,该方法同时需要由双星前后两时刻给出的位置定位信息来推算载体的速度,进而得到系统的速... 在北斗双星/SINS组合导航系统中,通过将双星定位延迟时间Δt扩充为卡尔曼滤波器的一个状态,提出并实现了一种处理北斗双星定位延迟现象的滤波方法,该方法同时需要由双星前后两时刻给出的位置定位信息来推算载体的速度,进而得到系统的速度观测方程。仿真结果表明,应用该方法对北斗双星/SINS组合导航系统进行实时滤波,可以很好的提高水平位置的定位精度,为克服双星系统定位实时性差的缺点提供了一种思路。 展开更多
关键词 SINS 滤波方法 北斗 组合导航系统 卡尔曼滤波器 双星定位 定位信息 延迟现象 延迟时间 观测方程 系统定位 定位精度 水平位置 仿真结果 实时性 速度
在线阅读 下载PDF
永磁直线同步电机全速无位置传感器控制 被引量:9
14
作者 陆华才 提娟 +1 位作者 高文根 陈其工 《电机与控制学报》 EI CSCD 北大核心 2013年第4期92-96,103,共6页
针对永磁直线同步电机无位置传感器控制时,单一的位置估计算法难以在宽范围内精确估计动子速度和位置信号的问题,为了进一步适应直线电机往复运动、速度变化范围大的特点,提出了高频信号注入法和增广扩展卡尔曼滤波算法复合的估计算法... 针对永磁直线同步电机无位置传感器控制时,单一的位置估计算法难以在宽范围内精确估计动子速度和位置信号的问题,为了进一步适应直线电机往复运动、速度变化范围大的特点,提出了高频信号注入法和增广扩展卡尔曼滤波算法复合的估计算法。在起动和低速时采用高频信号注入法,在中高速时采用增广扩展卡尔曼滤波法,在过渡区域采用高频信号注入法和增广扩展卡尔曼滤波算法融合的方法,实现从零速到高速全速范围内高精确度无位置传感器控制。仿真和实验结果表明,基于该复合算法的无位置传感器控制系统在全速范围内都具有良好的动态响应特性。 展开更多
关键词 永磁直线同步电机 无位置传感器控制 高频信号注入 增广扩展卡尔曼滤波法 全速
在线阅读 下载PDF
基于随机模型近似的再入目标自适应跟踪算法 被引量:7
15
作者 周政 刘进忙 郭相科 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2014年第5期651-657,共7页
针对再入目标跟踪问题,基于加速度动力学模型和随机模型近似思想,提出了分段匀Jerk自适应模型及跟踪算法.该算法引入Jerk动力学模型和Jerk分段均匀假设,给出了机动加速度的递推模型;根据随机模型近似思想提出了新的过程噪声定义方法并... 针对再入目标跟踪问题,基于加速度动力学模型和随机模型近似思想,提出了分段匀Jerk自适应模型及跟踪算法.该算法引入Jerk动力学模型和Jerk分段均匀假设,给出了机动加速度的递推模型;根据随机模型近似思想提出了新的过程噪声定义方法并给出了分段匀Jerk模型和过程噪声的自适应方法;结合状态扩展方法和分离差分滤波算法实现了再入目标的实时自适应跟踪.仿真实验表明,相比基于分段匀加速模型的跟踪算法,该算法在保证了再入目标稳态跟踪精度的同时,对目标突变状态具有较强的跟踪能力. 展开更多
关键词 再入目标跟踪 随机模型近似 分离差分滤波器 状态扩展 自适应滤波
原文传递
基于改进的迭代容积卡尔曼滤波姿态估计 被引量:4
16
作者 钱华明 黄蔚 孙龙 《哈尔滨工业大学学报》 EI CAS CSCD 北大核心 2014年第6期116-122,共7页
为了充分利用新的量测信息,提高姿态估计的精度,在分析现有迭代滤波策略存在问题的基础上,采用一种新的容积点迭代策略,将其与容积卡尔曼滤波算法相结合,提出了一种改进的迭代容积卡尔曼滤波(improved iterated cubature Kalman filter,... 为了充分利用新的量测信息,提高姿态估计的精度,在分析现有迭代滤波策略存在问题的基础上,采用一种新的容积点迭代策略,将其与容积卡尔曼滤波算法相结合,提出了一种改进的迭代容积卡尔曼滤波(improved iterated cubature Kalman filter,IICKF)算法.该算法采用容积数值积分理论近似非线性函数的均值与方差,利用状态扩维理论来解决量测迭代中量测噪声与状态相关的问题,同时利用一种新的容积点迭代策略,即在量测迭代过程中直接采用容积点迭代,避免每步迭代都进行均方根计算来产生容积点,克服传统迭代策略是基于高斯近似产生采样点的局限,有效地降低扩维带来的计算量.仿真结果表明:该算法的估计精度高于乘性扩展卡尔曼滤波(multiplicative extended Kalman filter,MEKF)以及迭代容积卡尔曼滤波(iterated cubature Kalman filter,ICKF)算法,该算法的提出有助于提高姿态估计的精度. 展开更多
关键词 姿态估计 改进的迭代容积卡尔曼滤波 容积数值积分理论 状态扩维 估计精度
在线阅读 下载PDF
带有色厚尾量测噪声的鲁棒高斯近似滤波器和平滑器 被引量:3
17
作者 黄玉龙 张勇刚 +2 位作者 武哲民 李宁 王刚 《自动化学报》 EI CSCD 北大核心 2017年第1期114-131,共18页
为了解决带有色厚尾量测噪声的非线性状态估计问题,本文提出了新的鲁棒高斯近似(Gaussian approximate,GA)滤波器和平滑器.首先,基于状态扩展方法将量测差分后带一步延迟状态和白色厚尾量测噪声的非线性状态估计问题,转化成带厚尾量测... 为了解决带有色厚尾量测噪声的非线性状态估计问题,本文提出了新的鲁棒高斯近似(Gaussian approximate,GA)滤波器和平滑器.首先,基于状态扩展方法将量测差分后带一步延迟状态和白色厚尾量测噪声的非线性状态估计问题,转化成带厚尾量测噪声的标准非线性状态估计问题.其次,针对量测差分后模型中的噪声尺度矩阵和自由度(Degrees of freedom,DOF)参数未知问题,设计了新的高斯近似滤波器和平滑器,通过建立未知参数和待估计状态的共轭先验分布,并利用变分贝叶斯方法同时估计未知的状态、尺度矩阵、自由度参数.最后,利用目标跟踪仿真验证了本文提出的带有色厚尾量测噪声的鲁棒高斯近似滤波器和平滑器的有效性以及与现有方法相比的优越性. 展开更多
关键词 非线性状态估计 有色厚尾量测噪声 变分贝叶斯 STUDENT s T分布 状态扩展方法
在线阅读 下载PDF
基于ASUKF的火星探测器脉冲星自主导航方法 被引量:11
18
作者 宁晓琳 马辛 +1 位作者 张学亮 武瑾媛 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2012年第1期22-27,共6页
脉冲星导航可靠、稳定、精度高,是实现火星探测器自主导航的有效手段之一.针对脉冲星导航中脉冲到达时间的微小误差会引起巨大的位置估计误差这一问题,提出了一种基于扩维Unsented卡尔曼滤波(ASUKF,Augmented State Unscented Kalman Fi... 脉冲星导航可靠、稳定、精度高,是实现火星探测器自主导航的有效手段之一.针对脉冲星导航中脉冲到达时间的微小误差会引起巨大的位置估计误差这一问题,提出了一种基于扩维Unsented卡尔曼滤波(ASUKF,Augmented State Unscented Kalman Filter)的火星探测器脉冲星自主导航方法,建立了以位置、速度和脉冲到达时间的常值测量误差作为状态量的导航系统数学模型,可在对探测器位置、速度进行估计的同时有效估计并修正脉冲到达时间的常值测量误差,并降低随机测量误差的影响.仿真结果表明该方法的导航定位精度可达350 m以内,可以满足火星探测自主导航的需要. 展开更多
关键词 脉冲星 自主导航 火星探测 扩维Unsented卡尔曼滤波
原文传递
基于压缩型EKF的SLAM改进算法 被引量:2
19
作者 张海强 窦丽华 +1 位作者 方浩 陈杰 《系统仿真学报》 CAS CSCD 北大核心 2009年第18期5668-5671,5680,共5页
针对基于压缩型扩展卡尔曼滤波(CEKF)的SLAM算法在状态增广和地图管理两方面的不足,提出了一种改进算法(ICEKF算法)。该算法通过增广辅助系数矩阵即可快速完成状态增广,计算复杂度由O(N2)降低为O(NA),其中N和NA分别为全局和局部地图中... 针对基于压缩型扩展卡尔曼滤波(CEKF)的SLAM算法在状态增广和地图管理两方面的不足,提出了一种改进算法(ICEKF算法)。该算法通过增广辅助系数矩阵即可快速完成状态增广,计算复杂度由O(N2)降低为O(NA),其中N和NA分别为全局和局部地图中的路标数。在地图管理上,ICEKF算法采用一种基于欧氏距离的局部地图动态选择方法,避免了CEKF算法对全局地图进行预先划分带来的路标分配等问题。仿真表明ICEKF算法在估计结果上与EKF算法具有一致的最优性,与CEKF算法相比计算量大大降低。 展开更多
关键词 同步定位和地图创建(SLAM) 压缩型扩展卡尔曼滤波 状态增广 计算复杂度
原文传递
基于增广观测器的非线性系统执行器故障诊断 被引量:16
20
作者 王振华 沈毅 张筱磊 《宇航学报》 EI CAS CSCD 北大核心 2012年第12期1742-1746,共5页
针对一类满足李普希茨条件的非线性系统,提出了一种新的执行器故障诊断方法。将执行器故障作为增广状态向量的一部分构造一个增广系统,然后利用线性矩阵不等式方法设计一个增广状态观测器,能够同时获得原系统的状态和执行器故障的渐近... 针对一类满足李普希茨条件的非线性系统,提出了一种新的执行器故障诊断方法。将执行器故障作为增广状态向量的一部分构造一个增广系统,然后利用线性矩阵不等式方法设计一个增广状态观测器,能够同时获得原系统的状态和执行器故障的渐近估计。利用李亚普诺夫理论分析了增广状态观测器的稳定性和收敛性。最后,将所提出的方法用于卫星姿态控制系统执行器的故障诊断,仿真结果验证了该方法的有效性。 展开更多
关键词 非线性系统 执行器故障诊断 增广观测器 线性矩阵不等式
在线阅读 下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部