Soil aggregate stability is a fundamental measure for evaluating soil structure.While numerous tests exist for assessing soil aggregate stability,ultrasonic agitation(UA)is widely recognized for its effectiveness.None...Soil aggregate stability is a fundamental measure for evaluating soil structure.While numerous tests exist for assessing soil aggregate stability,ultrasonic agitation(UA)is widely recognized for its effectiveness.Nonetheless,a significant limitation of UA is the lack of standardized methodologies and stability assessment criteria,resulting in inconsistency and incomparability across studies.Several critical factors influence the assessment of soil aggregate stability,including sample preparation(e.g.,drying,sieving,and settling duration),initial and final aggregate size classes,the definition of final energy form and its calculation,variations in instrumentation and laboratory procedures,and the absence of standardized criteria.Unlike some stability methods,UA produces a broad range of results,with dispersion energy varying significantly(0.5–13440 J g^(-1))across different soil and aggregate types due to divergent procedural settings.These settings encompass factors such as initial power and amplitude,temperature fluctuation,soil/water ratio,probe specification(diameter and insertion depth),and the choice of liquid used during the process.Furthermore,UA faces challenges related to limited reproducibility,raising doubts about its status as a standard stability assessment method.To address these issues,standardization through predefined procedures and stability criteria has the potential to transform UA into a precise and widely accepted method for both qualitative and quantitative assessments of soil stability.In this comprehensive review,we outline the challenges in standardizing UA,elucidate the factors contributing to dispersion energy variation,and offer practical recommendations to establish standardized protocols for UA in soil aggregate stability assessments.展开更多
Currently,the cranes used at sea do not have enough flexibility,efficiency,and safety.Thus,this study proposed a floating multirobot coordinated towing system to meet the demands for offshore towing.Because of the fle...Currently,the cranes used at sea do not have enough flexibility,efficiency,and safety.Thus,this study proposed a floating multirobot coordinated towing system to meet the demands for offshore towing.Because of the flexibility of rope-driven robots,the one-way pulling characteristics of the rope,and the floating characteristics of the base,towing robots are easily overturned.First,the spatial configuration of the towing system was established according to the towing task,and the kinematic model of the towing system was established using the coordinate transformation.Then,the dynamic model of the towing system was established according to the rigid-body dynamics and hydrodynamic theory.Finally,the stability of the towing system was analyzed using the stability cone method.The simulation experiments provide a reference for the practical application of the floating multirobot coordinated towing system,which can improve the stability of towing systems by changing the configuration of the towing robot.展开更多
Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a...Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional(3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium(GLE) method in two-dimensional(2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.展开更多
In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of c...In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of cavern,a sensitivity analysis has been performed on a single cavern in various rock mass qualities according to RMR using Phase 2.The stability of cavern has been studied by investigating the side wall deformation.Results showed that most sensitive properties are coefficient of lateral stress and modulus of deformation.Also parameters of Hoek-Brown criterion and r c have no sensitivity when cavern is in a perfect elastic state.But in an elasto-plastic state,parameters of Hoek-Brown criterion and r c affect the deformability;such effect becomes more remarkable with increasing plastic area.Other parameters have different sensitivities concerning rock mass quality(RMR).Results have been used to propose the best set of parameters for study on prediction of sidewall displacement.展开更多
The engineering geology and hydrogeology in the southern slope of Chengmenshan copper mine are very complicated,because there is a soft-weak layer between two kinds of sandstones.Field investigations demonstrate that ...The engineering geology and hydrogeology in the southern slope of Chengmenshan copper mine are very complicated,because there is a soft-weak layer between two kinds of sandstones.Field investigations demonstrate that some instability problems might occur in the slope.In this research,the southern slope,which is divided into six sections(I-0,I-1,I-2,II-0,II-1 and II-2),is selected for slope stability analysis using limit equilibrium and numerical method.Stability results show that the values of factor of safety(FOS) of sections I-0,I-1 and I-2 are very low and slope failure is likely to happen.Therefore reinforcement subjected to seismic,water and weak layer according to sections were carried out to increase the factor of safety of the three sections,two methods were used;grouting with hydration of cement and water to increase the cohesion(c) and pre-stressed anchor.Results of reinforcement showed that factor of safety increased more than 1.15.展开更多
An evaluation method for the seismic stability of embankment slope was presented based on catastrophe theory. Seven control factors, including internal frictional angle, cohesion force, slope height, slope angle, surf...An evaluation method for the seismic stability of embankment slope was presented based on catastrophe theory. Seven control factors, including internal frictional angle, cohesion force, slope height, slope angle, surface gradients, peak acceleration, and distance to fault were selected for analysis of multi-level objective decomposition. According to the normalization formula and the fuzzy subject function produced by combination of catastrophe theory and fuzzy math, a recursive calculation was carried out to obtain a catastrophic affiliated functional value, which can be used to evaluate the seismic stability of embankment slope. Fifteen samples were used to verify the effectiveness of this method. The results show that compared with the traditional quantitative method, the catastrophe progression owns higher accuracy and good application potential in predicting the seismic stability of embankment slope.展开更多
In order to study the stability control mechanism of a concave slope with circular landslide, and remove the influence of differences in shape on slope stability, the limit analysis method of a simplified Bishop metho...In order to study the stability control mechanism of a concave slope with circular landslide, and remove the influence of differences in shape on slope stability, the limit analysis method of a simplified Bishop method was employed. The sliding body was divided into strips in a three-dimensional model, and the lateral earth pressure was put into mechanical analysis and the three-dimensional stability analysis methods applicable for circular sliding in concave slope were deduced. Based on geometric structure and the geological parameters of a concave slope, the influence rule of curvature radius and the top and bottom arch height on the concave slope stability were analyzed. The results show that the stability coefficient decreases after growth, first in the transition stage of slope shape from flat to concave, and it has been confirmed that there is a best size to make the slope stability factor reach a maximum. By contrast with average slope, the stability of a concave slope features a smaller range of ascension with slope height increase, which indicates that the enhancing effect of a concave slope is apparent only with lower slope heights.展开更多
In this study, the flow stability of the flat-bottomed hopper was investigated via GPU-based discrete element method(DEM) simulation. With the material height inside the hopper reducing, the fluctuation of the flow ra...In this study, the flow stability of the flat-bottomed hopper was investigated via GPU-based discrete element method(DEM) simulation. With the material height inside the hopper reducing, the fluctuation of the flow rate indicates an unstable discharge. The flow regions of the unstable discharge were compared with that of the stable discharge, a key transformation zone, where the voidage showed the largest difference between unstable and stable discharge, was revealed. To identify the relevance of the key transformation zone and the hopper flow stability, the voidage variation of the key transformation zone with material height reducing was studied.A sharp increase in the voidage in the key transformation zone was considered to be the standard for judging the unstable hopper flow, and the ‘Top–Bottom effect' of the hopper was defined, which indicated the hopper flow was unstable when the hopper only had the top area and the bottom area, because the voidage of particles in the top area and the bottom area were both variables.展开更多
Two methods of stability analysis of systems described by dynamical equations are being considered. They are based on an analysis of eigenvalues spectrum for the evolutionary matrix or the spectral equation and they a...Two methods of stability analysis of systems described by dynamical equations are being considered. They are based on an analysis of eigenvalues spectrum for the evolutionary matrix or the spectral equation and they allow determining the conditions of stability and instability, as well as the possibility of chaotic behavior of systems in case of a stability loss. The methods are illustrated for nonlinear Lorenz and Rossler model problems.展开更多
Based on the assumption of finite deformation, the Hamilton variational principle is extended to a nonlinear elastic Euler-type beam-column structure located on a nonlinear elastic foundation. The corresponding three-...Based on the assumption of finite deformation, the Hamilton variational principle is extended to a nonlinear elastic Euler-type beam-column structure located on a nonlinear elastic foundation. The corresponding three-dimensional （3D） mathematical model for analyzing the nonlinear mechanical behaviors of structures is established, in which the effects of the rotation inertia and the nonlinearity of material and geometry are considered. As an application, the nonlinear stability and the post-buckling for a linear elastic beam with the equal cross-section located on an elastic foundation are analyzed. One end of the beam is fully fixed, and the other end is partially fixed and subjected to an axial force. A new numerical technique is proposed to calculate the trivial solution, bifurcation points, and bifurcation solutions by the shooting method and the Newton- Raphson iterative method. The first and second bifurcation points and the corresponding bifurcation solutions are calculated successfully. The effects of the foundation resistances and the inertia moments on the bifurcation points are considered.展开更多
Numerical solutions of the steady transonic small-disturbance（TSD） potential equation are computed using the conservative Murman-Cole scheme. Multiple solutions are discovered and mapped out for the Mach number rang...Numerical solutions of the steady transonic small-disturbance（TSD） potential equation are computed using the conservative Murman-Cole scheme. Multiple solutions are discovered and mapped out for the Mach number range at zero angle of attack and the angle of attack range at Mach number 0.85 for the NACA 0012 airfoil. We present a linear stability analysis method by directly assembling and evaluating the Jacobian matrix of the nonlinear finite-difference equation of the TSD equation. The stability of all the discovered multiple solutions are then determined by the proposed eigen analysis. The relation of stability to convergence of the iterative method for solving the TSD equation is discussed. Computations and the stability analysis demonstrate the possibility of eliminating the multiple solutions and stabilizing the remaining unique solution by adding a sufficiently long splitter plate downstream the airfoil trailing edge. Finally, instability of the solution of the TSD equation is shown to be closely connected to the onset of transonic buffet by comparing with experimental data.展开更多
In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been...In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.展开更多
The stability of partly liquid filled spacecraft with flexible attachment was investigated in this paper. Liquid sloshing dynamics was simplified as the spring-mass model, and flexible attachment was modeled as the li...The stability of partly liquid filled spacecraft with flexible attachment was investigated in this paper. Liquid sloshing dynamics was simplified as the spring-mass model, and flexible attachment was modeled as the linear shearing beam. The dynamic equations and Hamiltonian of the coupled spacecraft system were given by analyzing the rigid body, liquid fuel, and flexible appendage. Nonlinear stability conditions of the coupled spacecraft system were derived by computing the variation of Casimir function which was added to the Hamiltonian. The stable region of the parameter space was given and validated by numerical computation. Related results suggest that the change of inertia matrix, the length of flexible attachment, spacecraft spinning rate, and filled ratio of liquid fuel tank have strong influence on the stability of the spacecraft system.展开更多
In this paper we make a close study of the finite analytic method by means of the maximum principles in differential equations and give the proof of the stability and convergence of the finite analytic method.
The effects of plasma screening on the ^(1)P^(o) resonance states of H-and He below the n=3 and n=4 thresholds of the respective subsystemsare investigated using the stabilization method and correlated exponential wav...The effects of plasma screening on the ^(1)P^(o) resonance states of H-and He below the n=3 and n=4 thresholds of the respective subsystemsare investigated using the stabilization method and correlated exponential wave functions.Two plasma mediums,namely,the Debye plasma and quantum plasma environments are considered.The screened Coulomb potential(SCP)obtained from Debye-Hückel model is used to represent Debye plasma environments and the exponential cosine screened Coulomb potential(ECSCP)obtained from a modified Debye-Hückel model is used to represent quantum plasma environments.The resonance parameters(resonance positions and widths)are presented in terms of the screening parameters.展开更多
Proteasomes are responsible for the production of the majority of cytotoxic T lymphocyte(CTL) epitopes.Hence,it is important to identify correctly which peptides will be generated by proteasomes from an unknown protei...Proteasomes are responsible for the production of the majority of cytotoxic T lymphocyte(CTL) epitopes.Hence,it is important to identify correctly which peptides will be generated by proteasomes from an unknown protein.However,the pool of proteasome cleavage data used in the prediction algorithms,whether from major histocompatibility complex(MHC) I ligand or in vitro digestion data,is not identical to in vivo proteasomal digestion products.Therefore,the accuracy and reliability of these models still need to be improved.In this paper,three types of proteasomal cleavage data,constitutive proteasome(cCP),immunoproteasome(iCP) in vitro cleavage,and MHC I ligand data,were used for training cleave-site predictive methods based on the kernel-function stabilized matrix method(KSMM).The predictive accuracies of the KSMM+pair coefficients were 75.0%,72.3%,and 83.1% for cCP,iCP,and MHC I ligand data,respectively,which were comparable to the results from support vector machine(SVM).The three proteasomal cleavage methods were combined in turn with MHC I-peptide binding predictions to model MHC I-peptide processing and the presentation pathway.These integrations markedly improved MHC I peptide identification,increasing area under the receiver operator characteristics(ROC) curve(AUC) values from 0.82 to 0.91.The results suggested that both MHC I ligand and proteasomal in vitro degradation data can give an exact simulation of in vivo processed digestion.The information extracted from cCP and iCP in vitro cleavage data demonstrated that both cCP and iCP are selective in their usage of peptide bonds for cleavage.展开更多
In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cell...In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cells are jointed by a numerical flux that includes the convection numerical flux and the diffusion numerical flux. We solve the ordinary differential equations arising in the direct Galerkin method by using the strong stability preserving Runge^Kutta method. Numerical results are compared with the exact solution and the other results to show the accuracy and reliability of the method.展开更多
This paper explores the intra-layer synchronization in duplex networks with different topologies within layers and different inner coupling patterns between,within,and across layers.Based on the Lyapunov stability met...This paper explores the intra-layer synchronization in duplex networks with different topologies within layers and different inner coupling patterns between,within,and across layers.Based on the Lyapunov stability method,we prove theoretically that the duplex network can achieve intra-layer synchronization under some appropriate conditions,and give the thresholds of coupling strength within layers for different types of inner coupling matrices across layers.Interestingly,for a certain class of coupling matrices across layers,it needs larger coupling strength within layers to ensure the intra-layer synchronization when the coupling strength across layers become larger,intuitively opposing the fact that the intra-layer synchronization is seemly independent of the coupling strength across layers.Finally,numerical simulations further verify the theoretical results.展开更多
A two-level stabilized finite element method for the Stokes eigenvalue problem based on the local Gauss integration is considered. This method involves solving a Stokes eigenvalue problem on a coarse mesh with mesh si...A two-level stabilized finite element method for the Stokes eigenvalue problem based on the local Gauss integration is considered. This method involves solving a Stokes eigenvalue problem on a coarse mesh with mesh size H and a Stokes problem on a fine mesh with mesh size h -- O（H2）, which can still maintain the asymptotically optimal accuracy. It provides an approximate solution with the convergence rate of the same order as the usual stabilized finite element solution, which involves solving a Stokes eigenvalue problem on a fine mesh with mesh size h. Hence, the two-level stabilized finite element method can save a large amount of computational time. Moreover, numerical tests confirm the theoretical results of the present method.展开更多
In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stres...In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.展开更多
基金support from the National Natural Science Foundation of China(No.42177299)the Guangdong Province Key Areas Research and Development Plan Project,China—Key Preparation Technology and Application of Green and Efficient Agricultural Input Controlled-Release Materials(No.2023B0202080002)。
文摘Soil aggregate stability is a fundamental measure for evaluating soil structure.While numerous tests exist for assessing soil aggregate stability,ultrasonic agitation(UA)is widely recognized for its effectiveness.Nonetheless,a significant limitation of UA is the lack of standardized methodologies and stability assessment criteria,resulting in inconsistency and incomparability across studies.Several critical factors influence the assessment of soil aggregate stability,including sample preparation(e.g.,drying,sieving,and settling duration),initial and final aggregate size classes,the definition of final energy form and its calculation,variations in instrumentation and laboratory procedures,and the absence of standardized criteria.Unlike some stability methods,UA produces a broad range of results,with dispersion energy varying significantly(0.5–13440 J g^(-1))across different soil and aggregate types due to divergent procedural settings.These settings encompass factors such as initial power and amplitude,temperature fluctuation,soil/water ratio,probe specification(diameter and insertion depth),and the choice of liquid used during the process.Furthermore,UA faces challenges related to limited reproducibility,raising doubts about its status as a standard stability assessment method.To address these issues,standardization through predefined procedures and stability criteria has the potential to transform UA into a precise and widely accepted method for both qualitative and quantitative assessments of soil stability.In this comprehensive review,we outline the challenges in standardizing UA,elucidate the factors contributing to dispersion energy variation,and offer practical recommendations to establish standardized protocols for UA in soil aggregate stability assessments.
基金Supported by the National Natural Science Foundation of China under Grant No.51965032the Natural Science Foundation of Gansu Province of China under Grant No.22JR5RA319+2 种基金the Excellent Doctoral Student Foundation of Gansu Province of China under Grant No.23JRRA842the Sichuan Province Engineering Technology Research Center of General Aircraft Maintenance under Grant No.GAMRC2023YB05the Key Research and Development Project of Lanzhou Jiaotong University under Grant No.LZJTUZDYF2302.
文摘Currently,the cranes used at sea do not have enough flexibility,efficiency,and safety.Thus,this study proposed a floating multirobot coordinated towing system to meet the demands for offshore towing.Because of the flexibility of rope-driven robots,the one-way pulling characteristics of the rope,and the floating characteristics of the base,towing robots are easily overturned.First,the spatial configuration of the towing system was established according to the towing task,and the kinematic model of the towing system was established using the coordinate transformation.Then,the dynamic model of the towing system was established according to the rigid-body dynamics and hydrodynamic theory.Finally,the stability of the towing system was analyzed using the stability cone method.The simulation experiments provide a reference for the practical application of the floating multirobot coordinated towing system,which can improve the stability of towing systems by changing the configuration of the towing robot.
基金financially supported by the National Natural Science Foundation of China(Grant No.51178402,10902112)Department of Transportation Technology Projects(Grant No.2011318740240)the Fundamental Research Funds for the Central Universities(Grant No.2682014CX074)
文摘Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional(3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium(GLE) method in two-dimensional(2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.
文摘In order to analyze the stability of the underground rock structures,knowing the sensitivity of geomechanical parameters is important.To investigate the priority of these geomechanical properties in the stability of cavern,a sensitivity analysis has been performed on a single cavern in various rock mass qualities according to RMR using Phase 2.The stability of cavern has been studied by investigating the side wall deformation.Results showed that most sensitive properties are coefficient of lateral stress and modulus of deformation.Also parameters of Hoek-Brown criterion and r c have no sensitivity when cavern is in a perfect elastic state.But in an elasto-plastic state,parameters of Hoek-Brown criterion and r c affect the deformability;such effect becomes more remarkable with increasing plastic area.Other parameters have different sensitivities concerning rock mass quality(RMR).Results have been used to propose the best set of parameters for study on prediction of sidewall displacement.
基金support of Jiangxi Copper Company Limited (Chengmenshan Copper Mine)China Nerin Engineering Co.,Ltd.supported by the National Natural Science Foundation of China (No.11372363)
文摘The engineering geology and hydrogeology in the southern slope of Chengmenshan copper mine are very complicated,because there is a soft-weak layer between two kinds of sandstones.Field investigations demonstrate that some instability problems might occur in the slope.In this research,the southern slope,which is divided into six sections(I-0,I-1,I-2,II-0,II-1 and II-2),is selected for slope stability analysis using limit equilibrium and numerical method.Stability results show that the values of factor of safety(FOS) of sections I-0,I-1 and I-2 are very low and slope failure is likely to happen.Therefore reinforcement subjected to seismic,water and weak layer according to sections were carried out to increase the factor of safety of the three sections,two methods were used;grouting with hydration of cement and water to increase the cohesion(c) and pre-stressed anchor.Results of reinforcement showed that factor of safety increased more than 1.15.
基金financially supported by the open research fund of Key Laboratory of Highway Engineering of Sichuan Province, Southwest Jiaotong University (No. LHTE009201109)
文摘An evaluation method for the seismic stability of embankment slope was presented based on catastrophe theory. Seven control factors, including internal frictional angle, cohesion force, slope height, slope angle, surface gradients, peak acceleration, and distance to fault were selected for analysis of multi-level objective decomposition. According to the normalization formula and the fuzzy subject function produced by combination of catastrophe theory and fuzzy math, a recursive calculation was carried out to obtain a catastrophic affiliated functional value, which can be used to evaluate the seismic stability of embankment slope. Fifteen samples were used to verify the effectiveness of this method. The results show that compared with the traditional quantitative method, the catastrophe progression owns higher accuracy and good application potential in predicting the seismic stability of embankment slope.
基金financially supported by the China Postdoctoral Science Foundation(No.2015M580491)the National Natural Science Foundation of China(No.51404262)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20140213)the National High Technology Research and Development Program of China(No.2012AA062004)
文摘In order to study the stability control mechanism of a concave slope with circular landslide, and remove the influence of differences in shape on slope stability, the limit analysis method of a simplified Bishop method was employed. The sliding body was divided into strips in a three-dimensional model, and the lateral earth pressure was put into mechanical analysis and the three-dimensional stability analysis methods applicable for circular sliding in concave slope were deduced. Based on geometric structure and the geological parameters of a concave slope, the influence rule of curvature radius and the top and bottom arch height on the concave slope stability were analyzed. The results show that the stability coefficient decreases after growth, first in the transition stage of slope shape from flat to concave, and it has been confirmed that there is a best size to make the slope stability factor reach a maximum. By contrast with average slope, the stability of a concave slope features a smaller range of ascension with slope height increase, which indicates that the enhancing effect of a concave slope is apparent only with lower slope heights.
基金Supported by the State Key Development Program for Basic Research of China(2015CB251402)the National Natural Science Foundation of China(21325628,91334108)the Mole-8.5 Supercomputing System developed by Institute of Process Engineering,Chinese Academy of Sciences
文摘In this study, the flow stability of the flat-bottomed hopper was investigated via GPU-based discrete element method(DEM) simulation. With the material height inside the hopper reducing, the fluctuation of the flow rate indicates an unstable discharge. The flow regions of the unstable discharge were compared with that of the stable discharge, a key transformation zone, where the voidage showed the largest difference between unstable and stable discharge, was revealed. To identify the relevance of the key transformation zone and the hopper flow stability, the voidage variation of the key transformation zone with material height reducing was studied.A sharp increase in the voidage in the key transformation zone was considered to be the standard for judging the unstable hopper flow, and the ‘Top–Bottom effect' of the hopper was defined, which indicated the hopper flow was unstable when the hopper only had the top area and the bottom area, because the voidage of particles in the top area and the bottom area were both variables.
文摘Two methods of stability analysis of systems described by dynamical equations are being considered. They are based on an analysis of eigenvalues spectrum for the evolutionary matrix or the spectral equation and they allow determining the conditions of stability and instability, as well as the possibility of chaotic behavior of systems in case of a stability loss. The methods are illustrated for nonlinear Lorenz and Rossler model problems.
基金Project supported by the National Science Foundation for Distinguished Young Scholars of China(No. 11002084)the Shanghai Pujiang Program (No. 07pj14073)the Scientific Research Projectof Shanghai Normal University (No. SK201032)
文摘Based on the assumption of finite deformation, the Hamilton variational principle is extended to a nonlinear elastic Euler-type beam-column structure located on a nonlinear elastic foundation. The corresponding three-dimensional （3D） mathematical model for analyzing the nonlinear mechanical behaviors of structures is established, in which the effects of the rotation inertia and the nonlinearity of material and geometry are considered. As an application, the nonlinear stability and the post-buckling for a linear elastic beam with the equal cross-section located on an elastic foundation are analyzed. One end of the beam is fully fixed, and the other end is partially fixed and subjected to an axial force. A new numerical technique is proposed to calculate the trivial solution, bifurcation points, and bifurcation solutions by the shooting method and the Newton- Raphson iterative method. The first and second bifurcation points and the corresponding bifurcation solutions are calculated successfully. The effects of the foundation resistances and the inertia moments on the bifurcation points are considered.
文摘Numerical solutions of the steady transonic small-disturbance（TSD） potential equation are computed using the conservative Murman-Cole scheme. Multiple solutions are discovered and mapped out for the Mach number range at zero angle of attack and the angle of attack range at Mach number 0.85 for the NACA 0012 airfoil. We present a linear stability analysis method by directly assembling and evaluating the Jacobian matrix of the nonlinear finite-difference equation of the TSD equation. The stability of all the discovered multiple solutions are then determined by the proposed eigen analysis. The relation of stability to convergence of the iterative method for solving the TSD equation is discussed. Computations and the stability analysis demonstrate the possibility of eliminating the multiple solutions and stabilizing the remaining unique solution by adding a sufficiently long splitter plate downstream the airfoil trailing edge. Finally, instability of the solution of the TSD equation is shown to be closely connected to the onset of transonic buffet by comparing with experimental data.
文摘In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.
基金supported by the National Natural Science Foundation of China (11472041, 11532002)the Innovation Fund Designated for Graduate Students of Beijing Institute of Technology (2015CX10003)the Research Fund for the Doctoral Program of Higher Education of China (20131101110002)
文摘The stability of partly liquid filled spacecraft with flexible attachment was investigated in this paper. Liquid sloshing dynamics was simplified as the spring-mass model, and flexible attachment was modeled as the linear shearing beam. The dynamic equations and Hamiltonian of the coupled spacecraft system were given by analyzing the rigid body, liquid fuel, and flexible appendage. Nonlinear stability conditions of the coupled spacecraft system were derived by computing the variation of Casimir function which was added to the Hamiltonian. The stable region of the parameter space was given and validated by numerical computation. Related results suggest that the change of inertia matrix, the length of flexible attachment, spacecraft spinning rate, and filled ratio of liquid fuel tank have strong influence on the stability of the spacecraft system.
文摘In this paper we make a close study of the finite analytic method by means of the maximum principles in differential equations and give the proof of the stability and convergence of the finite analytic method.
基金Supported by the Natural Science Foundation of Heilongjiang Province(LH2024A025)。
文摘The effects of plasma screening on the ^(1)P^(o) resonance states of H-and He below the n=3 and n=4 thresholds of the respective subsystemsare investigated using the stabilization method and correlated exponential wave functions.Two plasma mediums,namely,the Debye plasma and quantum plasma environments are considered.The screened Coulomb potential(SCP)obtained from Debye-Hückel model is used to represent Debye plasma environments and the exponential cosine screened Coulomb potential(ECSCP)obtained from a modified Debye-Hückel model is used to represent quantum plasma environments.The resonance parameters(resonance positions and widths)are presented in terms of the screening parameters.
基金Project(No.11271059)supported by the National Natural Science Foundation of China
文摘Proteasomes are responsible for the production of the majority of cytotoxic T lymphocyte(CTL) epitopes.Hence,it is important to identify correctly which peptides will be generated by proteasomes from an unknown protein.However,the pool of proteasome cleavage data used in the prediction algorithms,whether from major histocompatibility complex(MHC) I ligand or in vitro digestion data,is not identical to in vivo proteasomal digestion products.Therefore,the accuracy and reliability of these models still need to be improved.In this paper,three types of proteasomal cleavage data,constitutive proteasome(cCP),immunoproteasome(iCP) in vitro cleavage,and MHC I ligand data,were used for training cleave-site predictive methods based on the kernel-function stabilized matrix method(KSMM).The predictive accuracies of the KSMM+pair coefficients were 75.0%,72.3%,and 83.1% for cCP,iCP,and MHC I ligand data,respectively,which were comparable to the results from support vector machine(SVM).The three proteasomal cleavage methods were combined in turn with MHC I-peptide binding predictions to model MHC I-peptide processing and the presentation pathway.These integrations markedly improved MHC I peptide identification,increasing area under the receiver operator characteristics(ROC) curve(AUC) values from 0.82 to 0.91.The results suggested that both MHC I ligand and proteasomal in vitro degradation data can give an exact simulation of in vivo processed digestion.The information extracted from cCP and iCP in vitro cleavage data demonstrated that both cCP and iCP are selective in their usage of peptide bonds for cleavage.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61105130 and 61175124)
文摘In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cells are jointed by a numerical flux that includes the convection numerical flux and the diffusion numerical flux. We solve the ordinary differential equations arising in the direct Galerkin method by using the strong stability preserving Runge^Kutta method. Numerical results are compared with the exact solution and the other results to show the accuracy and reliability of the method.
基金Project supported in part by the National Natural Science Foundation of China(Grant Nos.61573004 and 11501221)the Promotion Program for Young and Middle-aged Teacher in Science and Technology Research of Huaqiao University(Grant No.ZQN-YX301)+1 种基金the Program for New Century Excellent Talents in Fujian Province University in 2016the Project of Education and Scientific Research for Middle and Young Teachers in Fujian Province,China(Grant Nos.JAT170027 and JA15030)
文摘This paper explores the intra-layer synchronization in duplex networks with different topologies within layers and different inner coupling patterns between,within,and across layers.Based on the Lyapunov stability method,we prove theoretically that the duplex network can achieve intra-layer synchronization under some appropriate conditions,and give the thresholds of coupling strength within layers for different types of inner coupling matrices across layers.Interestingly,for a certain class of coupling matrices across layers,it needs larger coupling strength within layers to ensure the intra-layer synchronization when the coupling strength across layers become larger,intuitively opposing the fact that the intra-layer synchronization is seemly independent of the coupling strength across layers.Finally,numerical simulations further verify the theoretical results.
基金Project supported by the National Natural Science Foundation of China(Nos.10901131,10971166, and 10961024)the National High Technology Research and Development Program of China (No.2009AA01A135)the Natural Science Foundation of Xinjiang Uygur Autonomous Region (No.2010211B04)
文摘A two-level stabilized finite element method for the Stokes eigenvalue problem based on the local Gauss integration is considered. This method involves solving a Stokes eigenvalue problem on a coarse mesh with mesh size H and a Stokes problem on a fine mesh with mesh size h -- O（H2）, which can still maintain the asymptotically optimal accuracy. It provides an approximate solution with the convergence rate of the same order as the usual stabilized finite element solution, which involves solving a Stokes eigenvalue problem on a fine mesh with mesh size h. Hence, the two-level stabilized finite element method can save a large amount of computational time. Moreover, numerical tests confirm the theoretical results of the present method.
基金provided by the Beijing Natural Science Foundation(No.8142032)the National Natural Science Foundation of China(No.41040027)+2 种基金the State Key Program of National Natural Science of China(No.5113400)the Research Fund for the Doctoral Program of Higher Education(No.20130023110021)the Special Fund of Basic Research and Operating Expenses of State Key Laboratory of Geomechanics and Deep Underground Engineering,China University of Mining&Technology,Beijing
文摘In this study, the characteristics of geological structure at Qingshui coal mine were analyzed. And the hollow inclusion strain cell overcoring method was used to obtain the in situ stress. The effect of in situ stress on the stability of soft rock roadway was analyzed. The results show that the maximum principal stress is in the horizontal direction with a northeast orientation and has a value of about 1.2–1.9 times larger than gravity; the right side of roadway roof and floor is easily subject to serious deformation and failure, and the in situ stress is found to be a major factor. This paper presents important information for developing countermeasures against the large deformation of the soft rock roadway at Qingshui coal mine.
