To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency（RF） plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in th...To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency（RF） plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in this paper. The effects of the carrier gas flow rate and molybdenum powder feeding rate on the shape and size of the final products were studied. The molybdenum powder morphology was examined using high-resolution scanning electron microscopy. The powder phases were analyzed by X-ray diffraction. The tap density and apparent density of the molybdenum powder were investigated using a Hall flow meter and a Scott volumeter. The optimal process parameters for the spherical molybdenum powder preparation are 50 g/min powder feeding rate and 0.6 m^3/h carrier gas rate. In addition, pure spherical molybdenum powder can be obtained from irregular powder, and the tap density is enhanced after plasma processing. The average size is reduced from 72 to 62 μm, and the tap density is increased from 2.7 to 6.2 g/cm^3. Therefore, RF plasma is a promising method for the preparation of high-density and high-purity spherical powders.展开更多
The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigate...The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigated. Observed from the optical and electron microscopes, the as-sprayed V4 steel had the finer microstructure of uniform and equiaxial grains ,while after hot rolling for densification and spheroidized annealing, the V4 steel obtained an excellent spheroidized structure that is favorable to subsequent quenching and tempering treatment. The spheroidized structure and level of annealed hardness of the V4 steel are almost the same as expensive imported powder metallurgy the V4 steel. It is difficult to produce V4 steel with the conventional ingot metallurgical technique, so the multi-step and high-cost powder metallurgy method is generally used at present. Compared to the powder metallurgy technique, using the spray forming technique to produce the V4 steel has obvious advantages and potential market competitiveness in reducing production costs, simplifying working process, and shortening the production cycle.展开更多
基金financially supported by the 2012 Western Materials Innovation Foundation of China (No. XBCL-1-06)the Science and Technology Coordinating Innovative Engineering Project of Shaanxi Province of China (No. 2014KTCQ01-35)+1 种基金the Natural Science Foundation of Shaanxi Province of China (No. 2014JM6226)the Specialized Research Fund of Education Commission of Shaanxi Province of China (No. 2013JK0905)
文摘To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency（RF） plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in this paper. The effects of the carrier gas flow rate and molybdenum powder feeding rate on the shape and size of the final products were studied. The molybdenum powder morphology was examined using high-resolution scanning electron microscopy. The powder phases were analyzed by X-ray diffraction. The tap density and apparent density of the molybdenum powder were investigated using a Hall flow meter and a Scott volumeter. The optimal process parameters for the spherical molybdenum powder preparation are 50 g/min powder feeding rate and 0.6 m^3/h carrier gas rate. In addition, pure spherical molybdenum powder can be obtained from irregular powder, and the tap density is enhanced after plasma processing. The average size is reduced from 72 to 62 μm, and the tap density is increased from 2.7 to 6.2 g/cm^3. Therefore, RF plasma is a promising method for the preparation of high-density and high-purity spherical powders.
文摘The material selected for this work was the spray formed Vanadis4 high alloy cold working mould steel （abbreviated to V4 steel）. Its microstructure, hot rolling process, and annealing treatment have been investigated. Observed from the optical and electron microscopes, the as-sprayed V4 steel had the finer microstructure of uniform and equiaxial grains ,while after hot rolling for densification and spheroidized annealing, the V4 steel obtained an excellent spheroidized structure that is favorable to subsequent quenching and tempering treatment. The spheroidized structure and level of annealed hardness of the V4 steel are almost the same as expensive imported powder metallurgy the V4 steel. It is difficult to produce V4 steel with the conventional ingot metallurgical technique, so the multi-step and high-cost powder metallurgy method is generally used at present. Compared to the powder metallurgy technique, using the spray forming technique to produce the V4 steel has obvious advantages and potential market competitiveness in reducing production costs, simplifying working process, and shortening the production cycle.
