The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps.However,increasing the speed beyond the limit always accompanies cavitation,leading to the decrease of t...The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps.However,increasing the speed beyond the limit always accompanies cavitation,leading to the decrease of the volumetric efficiency.The pressure loss in the suction duct is considered a significant reason for the cavitation.Therefore,this paper proposes a methodology to optimize the shape of the suction duct aiming at reducing the intensity of cavitation and increasing the speed limit.At first,a computational fluid dynamics(CFD)model based on the full cavitation model(FCM)is developed to simulate the fluid field of the axial piston pump and a test rig is set to validate the model.Then the topology optimization is conducted for obtaining the minimum pressure loss in the suc-tion duct.Comparing the original suction duct with the optimized one in the simulation model,the pressure loss in the suction duct gets considerable reduction,which eases the cavitation intensity a lot.The simulation results prove that the speed limit can increase under several different inlet pressures.展开更多
Antennae are significant chemosensory and mechanosensory organs for insects and need careful maintenance.Bees use a pair of comb-like tools located on the forelimbs to brush and remove contaminants from their antennae...Antennae are significant chemosensory and mechanosensory organs for insects and need careful maintenance.Bees use a pair of comb-like tools located on the forelimbs to brush and remove contaminants from their antennae.We filmed antenna grooming in three different bee species and observed that all bees raise their heads while grooming their antennae.We conducted a study to examine the effects of the distinctive grooming apparatus,as well as the antenna’s material and structural characteristics,on grooming behavior in both free-head and constrained-head scenarios.Head-raising increases the grooming speed by 300%compared to the situation where the head is constrained.It allows the bees to scrape the antennae 5 times per second.In addition,we proposed a mechanical model based on the morphological data to determine that raising the head increases the contact force by 50%.These findings will facilitate the development of innovative approaches for cleaning extended structures featuring bristly surfaces.展开更多
At first, the function of Dobby (GT601) motion is analyzed, and then its speed limitation at which skips will occur because of the failure of the shedding action is worked out. At the same time, some effective measure...At first, the function of Dobby (GT601) motion is analyzed, and then its speed limitation at which skips will occur because of the failure of the shedding action is worked out. At the same time, some effective measures are proposed for raising the limiting speed from 200 r/m to 300 r/m to meet the need of medium speed rapier looms.展开更多
In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export e...In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic展开更多
Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybr...Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.展开更多
This study aims to explore the impact of combined health education and dietary guidance on the speed of postoperative recovery in patients with gastrointestinal polyps.A specific number of patients who underwent gastr...This study aims to explore the impact of combined health education and dietary guidance on the speed of postoperative recovery in patients with gastrointestinal polyps.A specific number of patients who underwent gastrointestinal polyp resection were selected and randomly divided into a control group and an experimental group.The control group received routine nursing,while the experimental group implemented combined health education and dietary guidance on this basis.By comparing the recovery indicators of the two groups,it was found that the recovery speed of the experimental group was significantly faster than that of the control group,indicating that this combined intervention method can effectively promote patient recovery.展开更多
Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the...Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the high-speed train family:the CR450,the world’s fastest electric multiple unit(EMU).展开更多
The dual challenges of critical speed prediction inaccuracies and ambiguous vibration behaviors are present in high-speed flexible rotors,particularly in free turbine rotors in turboshaft engine systems.The study begi...The dual challenges of critical speed prediction inaccuracies and ambiguous vibration behaviors are present in high-speed flexible rotors,particularly in free turbine rotors in turboshaft engine systems.The study begins with an examination of the rotor-bearing bidirectional coupling mechanism,with a primary focus on the nonlinear characteristics of the bearing.An investigation is carried out on the mechanical modeling methodologies for four-point contact ball bearings(FPCBBs)and cylindrical roller bearings(CRBs).To address the issue of excessive computational time in traditional bearing calculation methods,the sled dog optimization(SDO)algorithm is substituted for the conventional Newton-Raphson method.A rotor-bearing coupling dynamics model is developed by the finite element and lumped mass methods,with experimental validation achieved through a simulator test rig.The effects of three internal bearing parameters in FPCBBs(arching width and raceway groove curvature coefficient)and CRBs(initial radial clearance)on the critical speed characteristics and vibrational behavior of rotorbearing coupled systems are examined.The numerical simulation results show some interesting conclusions.展开更多
[Objective] The study was conducted to optimize the operation parameters of water control equipment for deep-litter beddings. [Method] A four-factor three-level orthogonal design was adopted to optimize experimental t...[Objective] The study was conducted to optimize the operation parameters of water control equipment for deep-litter beddings. [Method] A four-factor three-level orthogonal design was adopted to optimize experimental temperature, stopping time of aeration, aeration time and aeration rate by 9 groups of experiments, so as to improve the water removal efficiency of adopted mixed and reduce operation energy consumption. [Result] The average water contents in the mixed bedding under 3 temperatures decreased by 4.58% ±2.91%, 13.17% ±3.77% and 10.8% ±7.72%, respectively; the highest water removal efficiency could be achieved under an experimental temperature at 45 ℃, stopping time of aeration of 15 min, aeration time of 7 min, and an aeration rate at 4 m^3/min, which formed the optimal factor combination mode of the operation parameter of the water control equipment; the effects of various experimental factors on water content in the bedding were in order of aeration ratetemperatureaeration timestopping time of aeration; and the effects of various experimental factors on water removal efficiency in the bedding were in order of temperatureaeration rateaeration timestopping time of aeration. [Conclusion] After the optimization of operation parameters of the water control equipment for the deep-litter bedding, water removal efficiency of the mixed bedding could be improved, and the operation energy consumption of the equipment could be reduced.展开更多
This study was conducted to investigate the effects of seedling raising modes on photosynthetic charactedsticsand grain yield under wheat straw returning. Four representative cultivars in Huaibei area were selected as...This study was conducted to investigate the effects of seedling raising modes on photosynthetic charactedsticsand grain yield under wheat straw returning. Four representative cultivars in Huaibei area were selected as test materials. By setting potted seedlings and carpet seedlings, the effects of different nursery meth- ods on the photosynthesis of rice at different growth stages in Huaibei area were investigated. Compared with carpet seedlings, the leaf area index of potted seedlings decreased at the maturation stage, but the dry weight of leaf shewed no significant difference.The SPAD of potted seedlings had an increasing trend after transplanting, but the SPAD increased differently according to cultivars. The net photosynthetic rate, stomatal conductance and transpiration rate of the leaves of pot seeding rice were significantly higher than those of carpet seedling rice on the 85^th d after transplanting. However, theintracellular CO2 concentration and water use efficiency of leaves had no significant differences between different ＇treatments. The results indicate that the photosynthetic capacity of flag leaves of pot seedling rice is stronger in early and middle stages, but the decay rate of photosynthetic function is slightly faster than carpet seedling rice, which might be the main reason for the rice yield of potted seedlings having no remarkable difference from carpet seedlings.展开更多
[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, r...[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.展开更多
The effects of farming method, rice variety and seedling-raising method were studied on the population growth quality and grain yield of the mechanized transplanting rice by way of three-factor split plot design. The ...The effects of farming method, rice variety and seedling-raising method were studied on the population growth quality and grain yield of the mechanized transplanting rice by way of three-factor split plot design. The results showed that the no-tillage mechanical transplanting treatment was poorer than the conventional mechanical transplanting treatment in transplanting quality in general, but the former was similar to the latter in population growth quality. In regard to grain yield, the no-tillage mechanical transplanting treatment was lower than the conventional me- chanical transplanting treatment. Raising both pot-mat seedling and plastic-tray seedling did not make much difference in population growth and grain yield of mechanized transplanting rice, so both of the seedling-raising methods can be adopted according to practical conditions.展开更多
[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia ol...[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia oleifera grafting in emergent stocks, yellow clay soil, surface soil of pine forest, decomposed edible fungus, peat soil, dung and dirt were mixed by different proportions into five formulae as nursery substrates, with garden soil as the control, in order to investigate the influences of various substrates on the growth of annual Camellia oleifera container seedlings by using randomized block design based on variance analysis and multiple comparisons, and to screen the optimal substrate formula for container nursery of Camellia oleifera. [Result] The influences of different substrates on the transplanting survival rate, seedling height, basal diameter, height-diameter ratio and lateral root length of Camellia oleifera container seedlings were significantly different. Various growth indi- cators of Camellia oleifera container seedlings cultivated in the substrate containing 40% of yellow clay soil ＋ 15% of surface soil of pine forest ＋ 20% of decomposed edible fungus ＋ 20% of peat soil ＋ 5% of dung and dirt exceeded that of the control and other substrate formulae, which could be used as the optimal substrate formula for the container nursery of Camellia oleifera. [Conclusion] This study screened the optimal substrate formula for the container nursery of Camellia oleifera, which provided technical reference for the cultivation of Camellia oleifera container seedlings.展开更多
In order to control the spawning quality and improve the economic benefit of Apostichopus japonicus Selenka, the indoor temperature and light control methods were employed for artificial maturation, spawning and hatch...In order to control the spawning quality and improve the economic benefit of Apostichopus japonicus Selenka, the indoor temperature and light control methods were employed for artificial maturation, spawning and hatching of A. japonicus, and the larval survival rate, disease incidence rate and economic benefit were analyzed. The results showed that compared with those of conventional temperature-reared larvae, the survival rate of raised temperature-reared larvae was increased by 15.8%, the disease incidence rate was reduced by 10.2%, and the economic benefit was improved by 21.6%. These results will provide theoretical basis and technical support for the artificial breeding of A. japonicus.展开更多
[Objective] The aim was to promote nutrient cycling and utilization in the mountain＇s system combining fruits and poultry and to control non-point source pollution produced from swine raising and navel orange plantin...[Objective] The aim was to promote nutrient cycling and utilization in the mountain＇s system combining fruits and poultry and to control non-point source pollution produced from swine raising and navel orange planting in headwaters of Dongjiang River. [Method] The quantitative analysis was mainly conducted for the so called ＂raising by planting＂ which is about material cycle in ＂pig-methane-fruit-fish＂ model and energy cascade utilization, based on relationship between excreted amount by livestock and the utilized quantity in Xinlin Farm in Longtang Town, Dingnan County, Jiangxi Province. [Result] Considering N requirement by fruit trees, a navel orange orchard （1 mu） could support about 2.72 pigs, the equipped biogas pool （1.88 m3） could support 1 166.67 kg of duckweeds and a fish pond could support 25.57 grass carps. In contrast, a satsuma orchard （1 mu） could support about 1.96 pigs, the equipped biogas pool （1.35 m3） could support 841.53 kg duckweeds and the fish pond could support 18.44 grass carps. [Conclusion] The results provided scientific references for quantitative allocation of members in ＂pig-methane-fruit-fish＂ model when popularized in headwaters of Dongjiang River.展开更多
To study the organic substrates substitution for turf has certain significances and has become a hot research topic. The sources of organic substrates mainly concentrate in organic waste of agriculture and forestry, a...To study the organic substrates substitution for turf has certain significances and has become a hot research topic. The sources of organic substrates mainly concentrate in organic waste of agriculture and forestry, animal husbandry industrial wastes and municipal sludge and so on in China. In order to better explore and utilize organic substrates resources, the authors summed up the application of organic substrates of different sources to vegetable seedling raising. The re- sults showed that the organic substrate produced by traditional and advanced tech- nology had the characteristics of stability, strong buffer capacity, comprehensive nu- trition and a good environment for root growth, which could reduce the production cost, cultivate high quality seedling and benefit cyclic utilization of resources, and replace or partly replace the turf. The prospects for future research direction were discussed to provide references for research and development on organic vegetable seedling raising technology in China.展开更多
The Tertiary basins are distributed in the eastern margin of the Tibetan Plateau along the large\|scale arc\|shaped strike\|slip belt of the Qiangtang—Hengduan Shan—Jinshajiang—Red River belt. Most of basins were c...The Tertiary basins are distributed in the eastern margin of the Tibetan Plateau along the large\|scale arc\|shaped strike\|slip belt of the Qiangtang—Hengduan Shan—Jinshajiang—Red River belt. Most of basins were controlled by regional northwest\| and south\|north treading faults, and a few basins were constrained by northwest\| or north\|north\|east\|treading local faults.The detailed field mapping and sedimentologic observations for 6 typical Tertiary basins in eastern Tibet show that their types include depressive basins, rifting basins, pull\|apart and extensional basins related to strike\|slip faulting, and erosion\|residual basins. Recently, most of them are controlled by compression\| or thrust\|related margin faults in single side or double laterals of these basins. Not\|well\|developed strata in the Tertiary basins were deformed to form various tight folds and thrusts. High\|K magma intruded widely into the basins. The tectono\|sedimentary evolution of the Tertiary basins appears tempo\|spatially inhomogeneous. The preliminary model to interpret the Tertiary basin evolution is described as below.展开更多
基金Supported by National Key R&D Program of China(Grant No.2019YFB2004504).
文摘The maximum delivery pressure and the maximum rotational speed determine the power density of axial piston pumps.However,increasing the speed beyond the limit always accompanies cavitation,leading to the decrease of the volumetric efficiency.The pressure loss in the suction duct is considered a significant reason for the cavitation.Therefore,this paper proposes a methodology to optimize the shape of the suction duct aiming at reducing the intensity of cavitation and increasing the speed limit.At first,a computational fluid dynamics(CFD)model based on the full cavitation model(FCM)is developed to simulate the fluid field of the axial piston pump and a test rig is set to validate the model.Then the topology optimization is conducted for obtaining the minimum pressure loss in the suc-tion duct.Comparing the original suction duct with the optimized one in the simulation model,the pressure loss in the suction duct gets considerable reduction,which eases the cavitation intensity a lot.The simulation results prove that the speed limit can increase under several different inlet pressures.
基金supported by the National Natural Science Foundation of China(grant No.T2422031 and No.51905556).
文摘Antennae are significant chemosensory and mechanosensory organs for insects and need careful maintenance.Bees use a pair of comb-like tools located on the forelimbs to brush and remove contaminants from their antennae.We filmed antenna grooming in three different bee species and observed that all bees raise their heads while grooming their antennae.We conducted a study to examine the effects of the distinctive grooming apparatus,as well as the antenna’s material and structural characteristics,on grooming behavior in both free-head and constrained-head scenarios.Head-raising increases the grooming speed by 300%compared to the situation where the head is constrained.It allows the bees to scrape the antennae 5 times per second.In addition,we proposed a mechanical model based on the morphological data to determine that raising the head increases the contact force by 50%.These findings will facilitate the development of innovative approaches for cleaning extended structures featuring bristly surfaces.
文摘At first, the function of Dobby (GT601) motion is analyzed, and then its speed limitation at which skips will occur because of the failure of the shedding action is worked out. At the same time, some effective measures are proposed for raising the limiting speed from 200 r/m to 300 r/m to meet the need of medium speed rapier looms.
文摘In recent years, the subcontracting production for foreign trade of the Xi’an Aviation Engine Company (XAEC), a foreign trade production base of China, has achieved rapid development. In 1994, the company’s export earnings from foreign trade made a breakthrough at US$11 million, and it was commended by the State Economic
文摘Steady speed control of agricultural machinery can improve operating quality and efficiency.To address the impact of farmland slope variations on the speed stability of unmanned operation agricultural machinery,a hybrid control method was proposed.This method included a hybrid controller composed of a slope-based controller and a proportional-integral-derivative(PID)controller.The speed of agricultural machinery was influenced by longitudinal forces,which were divided into two parts:one part was slope-related forces and conventional resistance,and the other was hard-to-estimate forces,such as sliding friction.For the first part,a slope-based controller was designed;for the second part,a PID controller was implemented.By combining these two controllers,the system can dynamically adjust the throttle opening and the brake master cylinder pressure,ensuring steady speed travel on sloping farmland.Simulation tests at a target speed of 7 km/h demonstrated that the proposed controller maintained a stable speed,achieving a root mean square error of 0.13 km/h and a mean absolute percentage error of 1.6%.Field tests on a practical experimental platform validated the method’s effectiveness,with results showing consistent control performance across varying slope conditions.The proposed controller demonstrated superior control performance.Experimental data verified that this method can achieve precise control of the agricultural machinery’s movement speed,meeting the stability requirements for agricultural operations.
文摘This study aims to explore the impact of combined health education and dietary guidance on the speed of postoperative recovery in patients with gastrointestinal polyps.A specific number of patients who underwent gastrointestinal polyp resection were selected and randomly divided into a control group and an experimental group.The control group received routine nursing,while the experimental group implemented combined health education and dietary guidance on this basis.By comparing the recovery indicators of the two groups,it was found that the recovery speed of the experimental group was significantly faster than that of the control group,indicating that this combined intervention method can effectively promote patient recovery.
文摘Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the high-speed train family:the CR450,the world’s fastest electric multiple unit(EMU).
文摘The dual challenges of critical speed prediction inaccuracies and ambiguous vibration behaviors are present in high-speed flexible rotors,particularly in free turbine rotors in turboshaft engine systems.The study begins with an examination of the rotor-bearing bidirectional coupling mechanism,with a primary focus on the nonlinear characteristics of the bearing.An investigation is carried out on the mechanical modeling methodologies for four-point contact ball bearings(FPCBBs)and cylindrical roller bearings(CRBs).To address the issue of excessive computational time in traditional bearing calculation methods,the sled dog optimization(SDO)algorithm is substituted for the conventional Newton-Raphson method.A rotor-bearing coupling dynamics model is developed by the finite element and lumped mass methods,with experimental validation achieved through a simulator test rig.The effects of three internal bearing parameters in FPCBBs(arching width and raceway groove curvature coefficient)and CRBs(initial radial clearance)on the critical speed characteristics and vibrational behavior of rotorbearing coupled systems are examined.The numerical simulation results show some interesting conclusions.
基金Supported by the Fund for Independent Innovation of Agricultural Sciences in Jiangsu Province(CX(13)3073)Jiangsu Science and Technology Support Program(BE2014-342-1)~~
文摘[Objective] The study was conducted to optimize the operation parameters of water control equipment for deep-litter beddings. [Method] A four-factor three-level orthogonal design was adopted to optimize experimental temperature, stopping time of aeration, aeration time and aeration rate by 9 groups of experiments, so as to improve the water removal efficiency of adopted mixed and reduce operation energy consumption. [Result] The average water contents in the mixed bedding under 3 temperatures decreased by 4.58% ±2.91%, 13.17% ±3.77% and 10.8% ±7.72%, respectively; the highest water removal efficiency could be achieved under an experimental temperature at 45 ℃, stopping time of aeration of 15 min, aeration time of 7 min, and an aeration rate at 4 m^3/min, which formed the optimal factor combination mode of the operation parameter of the water control equipment; the effects of various experimental factors on water content in the bedding were in order of aeration ratetemperatureaeration timestopping time of aeration; and the effects of various experimental factors on water removal efficiency in the bedding were in order of temperatureaeration rateaeration timestopping time of aeration. [Conclusion] After the optimization of operation parameters of the water control equipment for the deep-litter bedding, water removal efficiency of the mixed bedding could be improved, and the operation energy consumption of the equipment could be reduced.
基金Supported by Jiangsu Provincial Science and Technology Demonstration Project(BE2015312)National Rice Industry Technical System(CARS-01-59)~~
文摘This study was conducted to investigate the effects of seedling raising modes on photosynthetic charactedsticsand grain yield under wheat straw returning. Four representative cultivars in Huaibei area were selected as test materials. By setting potted seedlings and carpet seedlings, the effects of different nursery meth- ods on the photosynthesis of rice at different growth stages in Huaibei area were investigated. Compared with carpet seedlings, the leaf area index of potted seedlings decreased at the maturation stage, but the dry weight of leaf shewed no significant difference.The SPAD of potted seedlings had an increasing trend after transplanting, but the SPAD increased differently according to cultivars. The net photosynthetic rate, stomatal conductance and transpiration rate of the leaves of pot seeding rice were significantly higher than those of carpet seedling rice on the 85^th d after transplanting. However, theintracellular CO2 concentration and water use efficiency of leaves had no significant differences between different ＇treatments. The results indicate that the photosynthetic capacity of flag leaves of pot seedling rice is stronger in early and middle stages, but the decay rate of photosynthetic function is slightly faster than carpet seedling rice, which might be the main reason for the rice yield of potted seedlings having no remarkable difference from carpet seedlings.
基金Supported by National Key Technology R&D Program during the 11th Five-year Plan Period(2006BAD32B01)~~
文摘[Objective] The experiment was aimed to select effective and economical media for container seedling of triploid clones of Populus tomentosa that was carried out. [Method] The sandy loam, peat, perlite, vermiculite, riversand, sludge were taken as media of hardwood cutting and survival rate, seedling height were taken as indexes to select media for container seedling of triploid clones of Populus tomentosa. [Result] Different mixedmedia had great influence on survival rates of container seedlings. Taking peat and vermiculite with the proportion of 5∶2 (M10) or peat ,vermiculite with the proportion of 7∶2 (M11) or sandy loam (M1) as media would generate higher cutting survival rate that was higher than 90.0%. There were significant differece in height increments of container seedlings. Taking sandy loam, peat and vermiculite with the proportion of 6∶2∶2(M5)or sandy loam (M1), seedling height of 60-days the seedling was over 37.0 cm. [Conclusion] According to cost analysis of nursery medium, the optimum medium for hardwood cuttings container seedling-raising of triploid clones of Populus tomentosa was sandy loam.
基金Supported by National Science and Technology Innovation Program for High-yielding and High-efficiency Grain Crops(2013BAD07B13-02)Special Fund for Agro-scientific Research in the Public Interest(201303102)~~
文摘The effects of farming method, rice variety and seedling-raising method were studied on the population growth quality and grain yield of the mechanized transplanting rice by way of three-factor split plot design. The results showed that the no-tillage mechanical transplanting treatment was poorer than the conventional mechanical transplanting treatment in transplanting quality in general, but the former was similar to the latter in population growth quality. In regard to grain yield, the no-tillage mechanical transplanting treatment was lower than the conventional me- chanical transplanting treatment. Raising both pot-mat seedling and plastic-tray seedling did not make much difference in population growth and grain yield of mechanized transplanting rice, so both of the seedling-raising methods can be adopted according to practical conditions.
基金Supported by Natural Science Foundation of Hubei Province(2012FFC03101)~~
文摘[Objective] This study aimed to investigate the optimal component of culti- vation medium for container seedling raising of Camellia oleifera. [Method] In the application of container nursery technology of Camellia oleifera grafting in emergent stocks, yellow clay soil, surface soil of pine forest, decomposed edible fungus, peat soil, dung and dirt were mixed by different proportions into five formulae as nursery substrates, with garden soil as the control, in order to investigate the influences of various substrates on the growth of annual Camellia oleifera container seedlings by using randomized block design based on variance analysis and multiple comparisons, and to screen the optimal substrate formula for container nursery of Camellia oleifera. [Result] The influences of different substrates on the transplanting survival rate, seedling height, basal diameter, height-diameter ratio and lateral root length of Camellia oleifera container seedlings were significantly different. Various growth indi- cators of Camellia oleifera container seedlings cultivated in the substrate containing 40% of yellow clay soil ＋ 15% of surface soil of pine forest ＋ 20% of decomposed edible fungus ＋ 20% of peat soil ＋ 5% of dung and dirt exceeded that of the control and other substrate formulae, which could be used as the optimal substrate formula for the container nursery of Camellia oleifera. [Conclusion] This study screened the optimal substrate formula for the container nursery of Camellia oleifera, which provided technical reference for the cultivation of Camellia oleifera container seedlings.
文摘In order to control the spawning quality and improve the economic benefit of Apostichopus japonicus Selenka, the indoor temperature and light control methods were employed for artificial maturation, spawning and hatching of A. japonicus, and the larval survival rate, disease incidence rate and economic benefit were analyzed. The results showed that compared with those of conventional temperature-reared larvae, the survival rate of raised temperature-reared larvae was increased by 15.8%, the disease incidence rate was reduced by 10.2%, and the economic benefit was improved by 21.6%. These results will provide theoretical basis and technical support for the artificial breeding of A. japonicus.
基金Supported by "Control and Treatment of Water Pollution" in National Science and Technology Major Project of China (2009ZX07211-001)~~
文摘[Objective] The aim was to promote nutrient cycling and utilization in the mountain＇s system combining fruits and poultry and to control non-point source pollution produced from swine raising and navel orange planting in headwaters of Dongjiang River. [Method] The quantitative analysis was mainly conducted for the so called ＂raising by planting＂ which is about material cycle in ＂pig-methane-fruit-fish＂ model and energy cascade utilization, based on relationship between excreted amount by livestock and the utilized quantity in Xinlin Farm in Longtang Town, Dingnan County, Jiangxi Province. [Result] Considering N requirement by fruit trees, a navel orange orchard （1 mu） could support about 2.72 pigs, the equipped biogas pool （1.88 m3） could support 1 166.67 kg of duckweeds and a fish pond could support 25.57 grass carps. In contrast, a satsuma orchard （1 mu） could support about 1.96 pigs, the equipped biogas pool （1.35 m3） could support 841.53 kg duckweeds and the fish pond could support 18.44 grass carps. [Conclusion] The results provided scientific references for quantitative allocation of members in ＂pig-methane-fruit-fish＂ model when popularized in headwaters of Dongjiang River.
基金Supported by Standardization Committee of Shandong Provincial Department o Agriculture~~
文摘To study the organic substrates substitution for turf has certain significances and has become a hot research topic. The sources of organic substrates mainly concentrate in organic waste of agriculture and forestry, animal husbandry industrial wastes and municipal sludge and so on in China. In order to better explore and utilize organic substrates resources, the authors summed up the application of organic substrates of different sources to vegetable seedling raising. The re- sults showed that the organic substrate produced by traditional and advanced tech- nology had the characteristics of stability, strong buffer capacity, comprehensive nu- trition and a good environment for root growth, which could reduce the production cost, cultivate high quality seedling and benefit cyclic utilization of resources, and replace or partly replace the turf. The prospects for future research direction were discussed to provide references for research and development on organic vegetable seedling raising technology in China.
文摘The Tertiary basins are distributed in the eastern margin of the Tibetan Plateau along the large\|scale arc\|shaped strike\|slip belt of the Qiangtang—Hengduan Shan—Jinshajiang—Red River belt. Most of basins were controlled by regional northwest\| and south\|north treading faults, and a few basins were constrained by northwest\| or north\|north\|east\|treading local faults.The detailed field mapping and sedimentologic observations for 6 typical Tertiary basins in eastern Tibet show that their types include depressive basins, rifting basins, pull\|apart and extensional basins related to strike\|slip faulting, and erosion\|residual basins. Recently, most of them are controlled by compression\| or thrust\|related margin faults in single side or double laterals of these basins. Not\|well\|developed strata in the Tertiary basins were deformed to form various tight folds and thrusts. High\|K magma intruded widely into the basins. The tectono\|sedimentary evolution of the Tertiary basins appears tempo\|spatially inhomogeneous. The preliminary model to interpret the Tertiary basin evolution is described as below.
