This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the...This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.展开更多
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic respo...A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures.展开更多
Fundamental principles from structural dynamics,random theory and perturbation methods are adopted to develop a new response spectrum combination rule for the seismic analysis of non-classically damped systems,such as...Fundamental principles from structural dynamics,random theory and perturbation methods are adopted to develop a new response spectrum combination rule for the seismic analysis of non-classically damped systems,such as structure-damper systems. The approach,which is named the perturbation spectrum method,can provide a more accurate evaluation of a non-classically damped system's mean peak response in terms of the ground response spectrum. To account for the effect of non-classical damping,all elements are included in the proposed method for seismic analysis of structure,which is usually ap-proximated by ignoring the off-diagonal elements of the modal damping matrix. Moreover,as has been adopted in the traditional Complete Quadratic Combination (CQC) method,the white noise model is also used to simplify the expressions of perturbation correlation coefficients. Finally,numerical work is performed to examine the accuracy of the proposed method by comparing the approximate results with exact ones and to demonstrate the importance of the neglected off-diagonal elements of the modal damping matrix. In the examined cases,the proposed method shows good agreement with direct time-history integration. Also,the perturbation spectrum method leads to a more efficient and economical calculation by avoiding the integral and complex operation.展开更多
The effects of ground motion spatial variability(GMSV)or fluid-structure interaction(FSI)on the seismic responses of deep-water bridges have been extensively examined.However,there are few studies on the seismic perfo...The effects of ground motion spatial variability(GMSV)or fluid-structure interaction(FSI)on the seismic responses of deep-water bridges have been extensively examined.However,there are few studies on the seismic performance of bridges considering GMSV and FSI effects simultaneously.In this study,the original multiple-support response spectrum(MSRS)method is extended to consider FSI effect for seismic analysis of deep-water bridges.The solution of hydrodynamic pressure on a pier is obtained using the radiation wave theory,and the FSI-MSRS formulation is derived according to the random vibration theory.The influence of FSI effect on the related coefficients is analyzed.A five-span steel-concrete continuous beam bridge is adopted to conduct the numerical simulations.Different load conditions are designed to investigate the variation of the bridge responses when considering the GMSV and FSI effects.The results indicate that the incoherence effect and wave passage effect decrease the bridge responses with a maximum percentage of 86%,while the FSI effect increases the responses with a maximum percentage of 26%.The GMSV and FSI effects should be included in the seismic design of deep-water bridges.展开更多
This paper presents a new procedure to transform an SSI system into an equivalent SDOF system using twice equivalence. A pushover analysis procedure based on the capacity spectrum method for buildings with SSI effects...This paper presents a new procedure to transform an SSI system into an equivalent SDOF system using twice equivalence. A pushover analysis procedure based on the capacity spectrum method for buildings with SSI effects （PASSI） is then established based on the equivalent SDOF system, and the modified response spectrum and equivalent capacity spectrum are obtained. Furthermore, the approximate formulas to obtain the dynamic stiffness of foundations are suggested. Three steel buildings with different story heights （3, 9 and 20） including SSI effects are analyzed under two far-field and two near-field historical records and an artificial seismic time history using the two PASSI procedures and the nonlinear response history analysis （NLhRHA） method. The results are compared and discussed. Finally, combined with seismic design response spectrum, the nonlinear seismic response of a 9-story building with SSI effects is analyzed using the PASSI procedures, and its seismic performance is evaluated according to the Chinese ＇Code for Seismic Design of Buildings. The feasibility of the proposed procedure is verified.展开更多
Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass a...Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.展开更多
The aim of this study is to assess the performance objectives defined in the Iraqi Seismic Code (ISC) in order to make a realistic evaluation related to Performance-Based Seismic Design (PBSD) of multi-story reinforce...The aim of this study is to assess the performance objectives defined in the Iraqi Seismic Code (ISC) in order to make a realistic evaluation related to Performance-Based Seismic Design (PBSD) of multi-story reinforced concrete buildings and also to compare and evaluate structural response demands obtained from nonlinear static analysis procedures according to two versions of the capacity spectrum method (CSM) which are recommended in ATC 40 and ATC 55. Two groups of three-dimensional RC buildings with different heights, designed according to Iraqi Building Code Requirements for Reinforced Concrete (IBC), are investigated. Pushover analyses are carried out to determine the nonlinear behavior of the buildings under three different seismic hazard levels, for two Iraqi seismic zones, of earthquake loads. In order to determine performance levels of the buildings, maximum inter-story drift demands and plasticizing sequence are determined and compared with the related limits using the CSM recommended in ATC 40 and ATC 55. From the results of this research, it can be concluded that RC buildings designed according to the Iraqi codes sufficiently provide the performance objectives stipulated in the ISC. Comparing structural response quantities obtained from the two versions of CSM, effects on performance evaluations of the buildings are investigated comparatively, as well.展开更多
Based on Fourier transform,the angular spectrum equation and its discrete model of the inverse source problem of the two-dimensional Helmholtz equation are derived.By transforming the two-dimensional inverse source pr...Based on Fourier transform,the angular spectrum equation and its discrete model of the inverse source problem of the two-dimensional Helmholtz equation are derived.By transforming the two-dimensional inverse source problem in the spatial domain into the inverse source problem in the one-dimensional Fourier domain,the source intensity angular spectrum vector in the Fourier domain is calculated by the one-dimensional method of moments.Then,using the discrete Fourier inverse transform,a multi-frequency angular spectrum method of moments is proposed to reconstruct the inverse source problem of the two-dimensional Helmholtz equation.The reconstruction accuracy and stability of this method are improved by optimizing the excitation wavenumber sequence.Simulation calculations show that the multi-frequency angular spectrum method of moments has high reconstruction accuracy and anti-noise ability,and can also design the reconstruction model according to the effective frequency band of the acoustic sensor to achieve the highest resolution.In addition,since the calculation of the coefficient matrix of the proposed method is independent of the distribution of the source intensity function and does not require regularization processing,when the size and resolution of the required source intensity distribution area are determined,after the coefficient matrix is calculated and saved,the source intensity function corresponding to the region of interest can be reconstructed according to different sound pressure detection data,with high calculation accuracy and efficiency.展开更多
Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the f...Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the first attempt at calculating the energy spectrum for this potential, which was introduced by H. Bahlouli and A. D. Alhaidari and for which they obtained the “potential parameter spectrum”. Our results are also independently verified using a direct method of diagonalizing the Hamiltonian matrix in the J-matrix basis.展开更多
The resistivity difference between oil and gas layers and the water layers in low contrast tight sandstone reservoirs is subtle. Fluid identification and saturation calculation based on conventional logging methods ar...The resistivity difference between oil and gas layers and the water layers in low contrast tight sandstone reservoirs is subtle. Fluid identification and saturation calculation based on conventional logging methods are facing challenges in such reservoirs. In this paper, a new method is proposed for fluid identification and saturation calculation in low contrast tight sandstone reservoirs. First, a model for calculating apparent formation water resistivity is constructed, which takes into account the influence of shale on the resistivity calculation and avoids apparent formation water resistivity abnormal values.Based on the distribution of the apparent formation water resistivity obtained by the new model, the water spectrum is determined for fluid identification in low contrast tight sandstone reservoirs.Following this, according to the average, standard deviation, and endpoints of the water spectrum, a new four-parameter model for calculating reservoir oil and gas saturation is built. The methods proposed in this paper are applied to the low contrast tight sandstone reservoirs in the Q4 formation of the X53 block and X70 block in the south of Songliao Basin, China. The results show that the water spectrum method can effectively distinguish oil-water layers and water layers in the study area. The standard deviation of the water spectrum in the oil-water layer is generally greater than that in the water layer. The new four-parameter model yields more accurate oil and gas saturation. These findings verify the effectiveness of the proposed methods.展开更多
Dam structure built to store water has failed with resulting loss of life, social, economic and environmental losses due to seismic vibrations. These vibrations are dynamic in nature. These vibrations must be reduced ...Dam structure built to store water has failed with resulting loss of life, social, economic and environmental losses due to seismic vibrations. These vibrations are dynamic in nature. These vibrations must be reduced with proper application of engineering principles and for estimating the behavior of concrete gravity dam dynamic analysis plays an extraordinary role. This paper presents the dynamic time history analysis and response spectrum method of a concrete gravity dam by using STAAD-PRO. Here Finite Element Approach is used to analyze the dam. A concrete gravity dam model is prepared in STAAD-PRO to perform the time history analysis and response spectrum analysis and a comparison is done between both these methods. Concrete gravity dam is a large structure which retains a very large amount of water on its upstream side and it is very crucial for a dam to survive against vibrations of earthquake. So it is a matter of study to check the behaviour of a dam during and after the application of the loading.展开更多
The uncertainty of nuclide libraries in the analysis of the gamma spectra of low-and intermediate-level radioactive waste(LILW)using existing methods produces unstable results.To address this problem,a novel spectral ...The uncertainty of nuclide libraries in the analysis of the gamma spectra of low-and intermediate-level radioactive waste(LILW)using existing methods produces unstable results.To address this problem,a novel spectral analysis method is proposed in this study.In this method,overlapping peaks are located using a continuous wavelet transform.An improved quadratic convolution method is proposed to calculate the widths of the peaks and establish a fourth-order filter model to estimate the Compton edge baseline with the overlapping peaks.Combined with the adaptive sensitive nonlinear iterative peak,this method can effectively subtracts the background.Finally,a function describing the peak shape as a filter is used to deconvolve the energy spectrum to achieve accurate qualitative and quantitative analyses of the nuclide without the aid of a nuclide library.Gamma spectrum acquisition experiments for standard point sources of Cs-137 and Eu-152,a segmented gamma scanning experiment for a 200 L standard drum,and a Monte Carlo simulation experiment for triple overlapping peaks using the closest energy of three typical LILW nuclides(Sb-125,Sb-124,and Cs-134)are conducted.The results of the experiments indicate that(1)the novel method and gamma vision(GV)with an accurate nuclide library have the same spectral analysis capability,and the peak area calculation error is less than 4%;(2)compared with the GV,the analysis results of the novel method are more stable;(3)the novel method can be applied to the activity measurement of LILW,and the error of the activity reconstruction at the equivalent radius is 2.4%;and(4)The proposed novel method can quantitatively analyze all nuclides in LILW without a nuclide library.This novel method can improve the accuracy and precision of LILW measurements,provide key technical support for the reasonable disposal of LILW,and ensure the safety of humans and the environment.展开更多
Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribut...Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.展开更多
A novel cooperative sensing method is proposed in this paper. The proposed scheme adopts sensing creditability degree to characterize the impact of the distance and the channel parameters on the sensing result,and con...A novel cooperative sensing method is proposed in this paper. The proposed scheme adopts sensing creditability degree to characterize the impact of the distance and the channel parameters on the sensing result,and considers that each user has different average SNR and different decision threshold,by using General Nash Bargaining Solution (GNBS) strategy in Cooperative Game Theory (CGT),the detection performance for two-user case are derived. For multi-user case,the sensing performance is obtained with Hungarian method. Compared with the traditional schemes such as Nash Bargaining Solution (NBS) and AND,the proposed scheme covers all the factors mentioned above,and enhances the sensing rationality and reliability. Simulation results show that the proposed scheme can further improve the sensing performance and creditability.展开更多
Neutron spectrum should be measured before test samples are irradiated.Neutron spectrum in an irradiation chamber of a research reactor was measured by using activation method when the reactor is in normal operation u...Neutron spectrum should be measured before test samples are irradiated.Neutron spectrum in an irradiation chamber of a research reactor was measured by using activation method when the reactor is in normal operation under 2 MW.Sixteen kinds of non-fission foils(19 reaction channels) were selected,of which 10 were sensitive to thermal and intermediate energy regions,while the others were of different threshold energy and sensitive to fast energy regions.By measuring the foil radioactivity,the neutron spectrum was unfolded with the iterative methods SAND-Ⅱ and MSIT.Finally,shielding corrections of group cross-section and main factors affecting the calculation accuracy were studied and the uncertainty of solution was analyzed using the Monte Carlo method in the process of SAND-Ⅱ.展开更多
The earthquake size distribution is generally considered to obey the Gutenberg Richter (GR) law. We have introduced the concept of the b value spectrum based on the moment method to investigate the deviation of t...The earthquake size distribution is generally considered to obey the Gutenberg Richter (GR) law. We have introduced the concept of the b value spectrum based on the moment method to investigate the deviation of the actual magnitude distribution of earthquakes from this law. This enables us to describe characteristic features of the magnitude frequency distribution of earthquakes. We found also a simple relation between the η value and the b value spectrum. Analysis using this scheme showed that the actual size distributions of earthquakes have large variations from case to case and sometimes deviate considerably from the widely assumed the GR formula.展开更多
It's common to use the method of continuous spectroscopy in water quality testing. But there're some problems with it. For example, the scanning results have a large number of nonlinear signals, and the covari...It's common to use the method of continuous spectroscopy in water quality testing. But there're some problems with it. For example, the scanning results have a large number of nonlinear signals, and the covariance between variables is serious, which can lead to a decrease in the model prediction accuracy. In this paper, the standard solutions of nitrate nitrogen(NO_(3)-N) and nitrite nitrogen(NO_(2)-N) were used as the subject to be tested, and the data of the scanned waves and absorbance were obtained by use of spectral detector. The data were processed by noise reduction first and then the random forest(RF) algorithm was adopted to establish the regression relationship between concentration and absorbance. For comparison, partial least squares(PLS) and support vector machine(SVM) algorithm models were also established. For the same given data, the three reverse models can make the projection of the concentration respectively. The experimental results show that the RF algorithm predicts NO_(2)-N concentrations significantly better than the SVM algorithm and PLS algorithm. This proves that the RF algorithm has good prediction ability in spectral water quality detection because of its high model accuracy and better adaptability, which could be a reference for similar research on continuous spectral water quality online detection.展开更多
The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothi...The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothing filtering methods are proposed to solve the problem. These methods include adopting method of arithmetic moving average, center of gravity, least squares of polynomial, slide converter of discrete funcion convolution etc. The process of spectrum data is realized, and the results are assessed in H/FWHM（ Peak High/Full Width at Half Maximum） and peak area based on the Matlab programming. The results indicate that different methods smoothed spectrum have respective superiority in different ergoregion, but the Gaussian function theory in discrete function convolution slide method is used to filter the complex y-spectrum on Embedded system nlatform, and the statistical fluctuation of y-snectrum filtered wall.展开更多
The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rai...The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rainflow counting method requires a data processing of the loading spectrum,which consists of the elimination of non-peak value data points,load time histories adjustment and loop extraction.In the data processing of the loading spectrum,if a stress point is neither the peak nor the valley,it will be identified and eliminated from the loading spectrum.Generally,the loading process is idealized as a single peak-valley straight line.But in actually,there are polylines or nearly straight lines between peaks and valleys which can't be ignored.Therefore,in the process of eliminating such data points,it will produce error in method itself.To reduce the error produced by the traditional method itself,a new method which can well simplify the polylines in data processing of loading spectrum is proposed in this paper.Comparing with the original approximation method,the proposed method has higher precision.展开更多
基金Project (No. 50578099) supported by the National Natural ScienceFoundation of China
文摘This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.
基金Major Program of National Science Foundation of China Under Grant No.90715005Program for New Century Excellent Talents in University Under Grant No. NCET-07-0186Doctoral Fund of Ministry of Education of China Under Grant No.200802860007
文摘A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures.
基金Project supported by the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT0518)the Program of Introducing Talents of Discipline to Universities (No. B08014), China
文摘Fundamental principles from structural dynamics,random theory and perturbation methods are adopted to develop a new response spectrum combination rule for the seismic analysis of non-classically damped systems,such as structure-damper systems. The approach,which is named the perturbation spectrum method,can provide a more accurate evaluation of a non-classically damped system's mean peak response in terms of the ground response spectrum. To account for the effect of non-classical damping,all elements are included in the proposed method for seismic analysis of structure,which is usually ap-proximated by ignoring the off-diagonal elements of the modal damping matrix. Moreover,as has been adopted in the traditional Complete Quadratic Combination (CQC) method,the white noise model is also used to simplify the expressions of perturbation correlation coefficients. Finally,numerical work is performed to examine the accuracy of the proposed method by comparing the approximate results with exact ones and to demonstrate the importance of the neglected off-diagonal elements of the modal damping matrix. In the examined cases,the proposed method shows good agreement with direct time-history integration. Also,the perturbation spectrum method leads to a more efficient and economical calculation by avoiding the integral and complex operation.
基金National Natural Science Foundation of China under Grant Nos.51427901 and 51678407Tianjin Municipal Education Commission under Grant No.2021KJ055Fundamental Research Funds for the Central Universities of China under Grant No.2000560616。
文摘The effects of ground motion spatial variability(GMSV)or fluid-structure interaction(FSI)on the seismic responses of deep-water bridges have been extensively examined.However,there are few studies on the seismic performance of bridges considering GMSV and FSI effects simultaneously.In this study,the original multiple-support response spectrum(MSRS)method is extended to consider FSI effect for seismic analysis of deep-water bridges.The solution of hydrodynamic pressure on a pier is obtained using the radiation wave theory,and the FSI-MSRS formulation is derived according to the random vibration theory.The influence of FSI effect on the related coefficients is analyzed.A five-span steel-concrete continuous beam bridge is adopted to conduct the numerical simulations.Different load conditions are designed to investigate the variation of the bridge responses when considering the GMSV and FSI effects.The results indicate that the incoherence effect and wave passage effect decrease the bridge responses with a maximum percentage of 86%,while the FSI effect increases the responses with a maximum percentage of 26%.The GMSV and FSI effects should be included in the seismic design of deep-water bridges.
基金National Natural Science Foundation of China Under Granted No.50538020Youth Science Foundation of Harbin City Under Grand No.2005AFXXJ015Youth Science Foundation of Heilongjiang Institute of Science and Technology
文摘This paper presents a new procedure to transform an SSI system into an equivalent SDOF system using twice equivalence. A pushover analysis procedure based on the capacity spectrum method for buildings with SSI effects （PASSI） is then established based on the equivalent SDOF system, and the modified response spectrum and equivalent capacity spectrum are obtained. Furthermore, the approximate formulas to obtain the dynamic stiffness of foundations are suggested. Three steel buildings with different story heights （3, 9 and 20） including SSI effects are analyzed under two far-field and two near-field historical records and an artificial seismic time history using the two PASSI procedures and the nonlinear response history analysis （NLhRHA） method. The results are compared and discussed. Finally, combined with seismic design response spectrum, the nonlinear seismic response of a 9-story building with SSI effects is analyzed using the PASSI procedures, and its seismic performance is evaluated according to the Chinese ＇Code for Seismic Design of Buildings. The feasibility of the proposed procedure is verified.
文摘Response spectra of fixed offshore structures impacted by extreme waves are investigated based on the higher order components of the nonlinear drag force. In this way, steel jacket platforms are simplified as a mass attached to a light cantilever cylinder and their corresponding deformation response spectra are estimated by utilizing a generalized single degree of freedom system. Based on the wave data recorded in the Persian Gulf region, extreme wave loading conditions corresponding to different return periods are exerted on the offshore structures. Accordingly, the effect of the higher order components of the drag force is considered and compared to the linearized state for different sea surface levels. When the fundamental period of the offshore structure is about one third of the main period of wave loading, the results indicate the linearized drag term is not capable of achieving a reliable deformation response spectrum.
文摘The aim of this study is to assess the performance objectives defined in the Iraqi Seismic Code (ISC) in order to make a realistic evaluation related to Performance-Based Seismic Design (PBSD) of multi-story reinforced concrete buildings and also to compare and evaluate structural response demands obtained from nonlinear static analysis procedures according to two versions of the capacity spectrum method (CSM) which are recommended in ATC 40 and ATC 55. Two groups of three-dimensional RC buildings with different heights, designed according to Iraqi Building Code Requirements for Reinforced Concrete (IBC), are investigated. Pushover analyses are carried out to determine the nonlinear behavior of the buildings under three different seismic hazard levels, for two Iraqi seismic zones, of earthquake loads. In order to determine performance levels of the buildings, maximum inter-story drift demands and plasticizing sequence are determined and compared with the related limits using the CSM recommended in ATC 40 and ATC 55. From the results of this research, it can be concluded that RC buildings designed according to the Iraqi codes sufficiently provide the performance objectives stipulated in the ISC. Comparing structural response quantities obtained from the two versions of CSM, effects on performance evaluations of the buildings are investigated comparatively, as well.
基金supported by the National Natural Science Foundation of China(51775121,12364055).
文摘Based on Fourier transform,the angular spectrum equation and its discrete model of the inverse source problem of the two-dimensional Helmholtz equation are derived.By transforming the two-dimensional inverse source problem in the spatial domain into the inverse source problem in the one-dimensional Fourier domain,the source intensity angular spectrum vector in the Fourier domain is calculated by the one-dimensional method of moments.Then,using the discrete Fourier inverse transform,a multi-frequency angular spectrum method of moments is proposed to reconstruct the inverse source problem of the two-dimensional Helmholtz equation.The reconstruction accuracy and stability of this method are improved by optimizing the excitation wavenumber sequence.Simulation calculations show that the multi-frequency angular spectrum method of moments has high reconstruction accuracy and anti-noise ability,and can also design the reconstruction model according to the effective frequency band of the acoustic sensor to achieve the highest resolution.In addition,since the calculation of the coefficient matrix of the proposed method is independent of the distribution of the source intensity function and does not require regularization processing,when the size and resolution of the required source intensity distribution area are determined,after the coefficient matrix is calculated and saved,the source intensity function corresponding to the region of interest can be reconstructed according to different sound pressure detection data,with high calculation accuracy and efficiency.
文摘Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the first attempt at calculating the energy spectrum for this potential, which was introduced by H. Bahlouli and A. D. Alhaidari and for which they obtained the “potential parameter spectrum”. Our results are also independently verified using a direct method of diagonalizing the Hamiltonian matrix in the J-matrix basis.
基金funded by the National Natural Science Foundation of China (42174131)。
文摘The resistivity difference between oil and gas layers and the water layers in low contrast tight sandstone reservoirs is subtle. Fluid identification and saturation calculation based on conventional logging methods are facing challenges in such reservoirs. In this paper, a new method is proposed for fluid identification and saturation calculation in low contrast tight sandstone reservoirs. First, a model for calculating apparent formation water resistivity is constructed, which takes into account the influence of shale on the resistivity calculation and avoids apparent formation water resistivity abnormal values.Based on the distribution of the apparent formation water resistivity obtained by the new model, the water spectrum is determined for fluid identification in low contrast tight sandstone reservoirs.Following this, according to the average, standard deviation, and endpoints of the water spectrum, a new four-parameter model for calculating reservoir oil and gas saturation is built. The methods proposed in this paper are applied to the low contrast tight sandstone reservoirs in the Q4 formation of the X53 block and X70 block in the south of Songliao Basin, China. The results show that the water spectrum method can effectively distinguish oil-water layers and water layers in the study area. The standard deviation of the water spectrum in the oil-water layer is generally greater than that in the water layer. The new four-parameter model yields more accurate oil and gas saturation. These findings verify the effectiveness of the proposed methods.
文摘Dam structure built to store water has failed with resulting loss of life, social, economic and environmental losses due to seismic vibrations. These vibrations are dynamic in nature. These vibrations must be reduced with proper application of engineering principles and for estimating the behavior of concrete gravity dam dynamic analysis plays an extraordinary role. This paper presents the dynamic time history analysis and response spectrum method of a concrete gravity dam by using STAAD-PRO. Here Finite Element Approach is used to analyze the dam. A concrete gravity dam model is prepared in STAAD-PRO to perform the time history analysis and response spectrum analysis and a comparison is done between both these methods. Concrete gravity dam is a large structure which retains a very large amount of water on its upstream side and it is very crucial for a dam to survive against vibrations of earthquake. So it is a matter of study to check the behaviour of a dam during and after the application of the loading.
基金supported by the National Natural Science Foundation of China(Nos.12205190,11805121)the Science and Technology Commission of Shanghai Municipality(No.21ZR1435400).
文摘The uncertainty of nuclide libraries in the analysis of the gamma spectra of low-and intermediate-level radioactive waste(LILW)using existing methods produces unstable results.To address this problem,a novel spectral analysis method is proposed in this study.In this method,overlapping peaks are located using a continuous wavelet transform.An improved quadratic convolution method is proposed to calculate the widths of the peaks and establish a fourth-order filter model to estimate the Compton edge baseline with the overlapping peaks.Combined with the adaptive sensitive nonlinear iterative peak,this method can effectively subtracts the background.Finally,a function describing the peak shape as a filter is used to deconvolve the energy spectrum to achieve accurate qualitative and quantitative analyses of the nuclide without the aid of a nuclide library.Gamma spectrum acquisition experiments for standard point sources of Cs-137 and Eu-152,a segmented gamma scanning experiment for a 200 L standard drum,and a Monte Carlo simulation experiment for triple overlapping peaks using the closest energy of three typical LILW nuclides(Sb-125,Sb-124,and Cs-134)are conducted.The results of the experiments indicate that(1)the novel method and gamma vision(GV)with an accurate nuclide library have the same spectral analysis capability,and the peak area calculation error is less than 4%;(2)compared with the GV,the analysis results of the novel method are more stable;(3)the novel method can be applied to the activity measurement of LILW,and the error of the activity reconstruction at the equivalent radius is 2.4%;and(4)The proposed novel method can quantitatively analyze all nuclides in LILW without a nuclide library.This novel method can improve the accuracy and precision of LILW measurements,provide key technical support for the reasonable disposal of LILW,and ensure the safety of humans and the environment.
基金Supported by the China National Science and Technology Major Project(2016ZX05050)
文摘Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.
基金Supported by the National High Technology Research and Development Program of China (863 Program,No.2009AA01-Z241)the National Natural Science Foundation of China (No.60772062)
文摘A novel cooperative sensing method is proposed in this paper. The proposed scheme adopts sensing creditability degree to characterize the impact of the distance and the channel parameters on the sensing result,and considers that each user has different average SNR and different decision threshold,by using General Nash Bargaining Solution (GNBS) strategy in Cooperative Game Theory (CGT),the detection performance for two-user case are derived. For multi-user case,the sensing performance is obtained with Hungarian method. Compared with the traditional schemes such as Nash Bargaining Solution (NBS) and AND,the proposed scheme covers all the factors mentioned above,and enhances the sensing rationality and reliability. Simulation results show that the proposed scheme can further improve the sensing performance and creditability.
基金Supported by"Strategic Priority Research Program"of the Chinese Academy of Science(No.XDA02001003)
文摘Neutron spectrum should be measured before test samples are irradiated.Neutron spectrum in an irradiation chamber of a research reactor was measured by using activation method when the reactor is in normal operation under 2 MW.Sixteen kinds of non-fission foils(19 reaction channels) were selected,of which 10 were sensitive to thermal and intermediate energy regions,while the others were of different threshold energy and sensitive to fast energy regions.By measuring the foil radioactivity,the neutron spectrum was unfolded with the iterative methods SAND-Ⅱ and MSIT.Finally,shielding corrections of group cross-section and main factors affecting the calculation accuracy were studied and the uncertainty of solution was analyzed using the Monte Carlo method in the process of SAND-Ⅱ.
文摘The earthquake size distribution is generally considered to obey the Gutenberg Richter (GR) law. We have introduced the concept of the b value spectrum based on the moment method to investigate the deviation of the actual magnitude distribution of earthquakes from this law. This enables us to describe characteristic features of the magnitude frequency distribution of earthquakes. We found also a simple relation between the η value and the b value spectrum. Analysis using this scheme showed that the actual size distributions of earthquakes have large variations from case to case and sometimes deviate considerably from the widely assumed the GR formula.
基金supported by the National Natural Science Foundation of China (No.51205005)the Beijing Science and Technology Innovation Service Ability Building (No.PXM2017-014212-000013)。
文摘It's common to use the method of continuous spectroscopy in water quality testing. But there're some problems with it. For example, the scanning results have a large number of nonlinear signals, and the covariance between variables is serious, which can lead to a decrease in the model prediction accuracy. In this paper, the standard solutions of nitrate nitrogen(NO_(3)-N) and nitrite nitrogen(NO_(2)-N) were used as the subject to be tested, and the data of the scanned waves and absorbance were obtained by use of spectral detector. The data were processed by noise reduction first and then the random forest(RF) algorithm was adopted to establish the regression relationship between concentration and absorbance. For comparison, partial least squares(PLS) and support vector machine(SVM) algorithm models were also established. For the same given data, the three reverse models can make the projection of the concentration respectively. The experimental results show that the RF algorithm predicts NO_(2)-N concentrations significantly better than the SVM algorithm and PLS algorithm. This proves that the RF algorithm has good prediction ability in spectral water quality detection because of its high model accuracy and better adaptability, which could be a reference for similar research on continuous spectral water quality online detection.
基金Sponsored by the Natural Science Fundation of Jiangxi Province(Grant No.20114BAB211026 and 20122BAB201028)the Open Science Fund from Key Laboratory of Radioactive Geology and Exploration Technology Fundamental Science for National Defense,East China Institute of Technology(Grant No.2010RGET11)
文摘The extraction of spectral parameters is very difficult because of the limited energy resolution for NaI （TI） gamma-ray detectors. For statistical fluctuation of radioactivity under complex environment, some smoothing filtering methods are proposed to solve the problem. These methods include adopting method of arithmetic moving average, center of gravity, least squares of polynomial, slide converter of discrete funcion convolution etc. The process of spectrum data is realized, and the results are assessed in H/FWHM（ Peak High/Full Width at Half Maximum） and peak area based on the Matlab programming. The results indicate that different methods smoothed spectrum have respective superiority in different ergoregion, but the Gaussian function theory in discrete function convolution slide method is used to filter the complex y-spectrum on Embedded system nlatform, and the statistical fluctuation of y-snectrum filtered wall.
基金National Natural Science Foundation of China(No.11272082)
文摘The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rainflow counting method requires a data processing of the loading spectrum,which consists of the elimination of non-peak value data points,load time histories adjustment and loop extraction.In the data processing of the loading spectrum,if a stress point is neither the peak nor the valley,it will be identified and eliminated from the loading spectrum.Generally,the loading process is idealized as a single peak-valley straight line.But in actually,there are polylines or nearly straight lines between peaks and valleys which can't be ignored.Therefore,in the process of eliminating such data points,it will produce error in method itself.To reduce the error produced by the traditional method itself,a new method which can well simplify the polylines in data processing of loading spectrum is proposed in this paper.Comparing with the original approximation method,the proposed method has higher precision.
