Tuberculosis(TB)remained the first leading cause of death from a single infectious agent worldwide in 2023,resulting in nearly twice as many deaths as those caused by the human immunodeficiency virus/acquired immune d...Tuberculosis(TB)remained the first leading cause of death from a single infectious agent worldwide in 2023,resulting in nearly twice as many deaths as those caused by the human immunodeficiency virus/acquired immune deficiency syndrome.An estimated 10.8 million TB cases were reported globally in 2023,with approximately 1.25 million associated deaths.In China,which ranks third in the global TB burden,there were approximately 741,000 new cases and 25,000 deaths in 2023^([1]).TB poses a significant threat to human health worldwide.展开更多
The change in land development intensity is an important perspective to reflect the variation in regional social and economic development and spatial differentiation.In this paper,spatial statistical analysis,Ordinary...The change in land development intensity is an important perspective to reflect the variation in regional social and economic development and spatial differentiation.In this paper,spatial statistical analysis,Ordinary Least Squares(OLS),and Geographically weighted regression(GWR)methods are used to systematically analyse the spatial-temporal characteristics and driving forces of land development intensity for 131 spatial units in the western China from 2000 to 2015.The findings of the study are as follows:1)The land development intensity in the western China has been increasing rapidly.From 2000 to 2015,land development intensity increased by 3.4 times on average.2)The hotspot areas have shifted from central Inner Mongolia,northern Shaanxi and the Beibu Gulf of Guangxi to the Guanzhong Plain and the Chengdu-Chongqing urban agglomeration.The areas of cold spots were mainly concentrated in the Qinghai-Tibet Plateau,Yunnan,and Xinjiang.3)Investment intensity and the natural environment have always been the main drivers of land development intensity in the western China.Investment played a powerful role in promoting land development intensity,while the natural and ecological environment distinctly constrained such development.The effect of the economic factors on land development intensity in the western China has changed,which is reflected in the driving factor of construction land development shifting from economic growth in 2000 to economic structure,especially industrial structure,in 2015.展开更多
The dynamics of regional convergence include spatial and temporal dimensions. Spatial Markov chain can be used to explore how regions evolve by considering both individual regions and their geographic neighbors. Based...The dynamics of regional convergence include spatial and temporal dimensions. Spatial Markov chain can be used to explore how regions evolve by considering both individual regions and their geographic neighbors. Based on per capita GDP data set of 77 counties from 1978 to 2000, this paper attempts to investigate the spatial-temporal dynamics of regional convergence in Jiangsu. First, traditional Markov matrix for five per capita GDP classes is constructed for later comparison. Moreover, each region’s spatial lag is derived by averaging all its neighbors’ per capita GDP data. Conditioning on per capita GDP class of its spatial lag at the beginning of each year, spatial Markov transition probabilities of each region are calculated accordingly. Quantitatively, for a poor region, the probability of moving upward is 3.3% if it is surrounded by its poor neighbors, and even increases to 18.4% if it is surrounded by its rich neighbors, but it goes down to 6.2% on average if ignoring regional context. For a rich region, the probability of moving down ward is 1.2% if it is surrounded by its rich neighbors, but increases to 3.0% if it is surrounded by its poor neighbors, and averages 1.5% irrespective of regional context. Spatial analysis of regional GDP class transitions indicates those 10 upward moves of both regions and their neighbors are unexceptionally located in the southern Jiangsu, while downward moves of regions or their neighbors are almost in the northern Jiangsu. These empirical results provide a spatial explanation to the "convergence clubs" detected by traditional Markov chain.展开更多
Analysis of spatial-temporal variations of desert vegetation under the background of climate changes can provide references for ecological restoration in arid and semi-arid areas. In this study, we used the Global Inv...Analysis of spatial-temporal variations of desert vegetation under the background of climate changes can provide references for ecological restoration in arid and semi-arid areas. In this study, we used the Global Inventory Modeling and Mapping Studies （GIMMS） NDVI data from 1982 to 2006 and Moderate Resolution Imaging Spectroradiometer （MODIS） NDVI data from 2000 to 2013 to reveal the dynamics of desert vegetation in Hexi region of Northwest China over the past three decades. We also used the annual temperature and precipitation data acquired from the Chinese meteorological stations to analyze the response of desert vegetation to climatic variations. The average value of NDVImax （the maximum NDVI during the growing season） for desert vegetation in Hexi region increased at the rate of 0.65x10-3/a （P〈0.05） from 1982 to 2013, and the significant increases of NDVImax mainly appeared in the typical desert vegetation areas. Vegetation was significantly improved in the lower reaches of Shule and Shiyang river basins, and the weighted mean center of desert vegetation mainly shifted toward the lower reaches of the two basins. Almost 95.32% of the total desert vegetation area showed positive correlation between NDVImax and annual precipitation, indicating that precipitation is the key factor for desert vegetation growth in the entire study area. Moreover, the areas with non-significant positive correlation between NDVImax and annual precipitation mainly located in the lower reaches of Shiyang and Shule river basins, this may be due to human activities. Only 7.64% of the desert vegetation showed significant positive correlation between NDVImax and annual precipitation in the Shule River Basin （an extremely arid area）, indicating that precipitation is not the most important factor for vegetation growth in this basin, and further studies are needed to investigate the mechanism for this phenomenon.展开更多
Lake surface water temperature （SWT） is an important indicator of lake state relative to its water chemistry and aquatic ecosystem,in addition to being an important regional climate indicator.However,few literatures...Lake surface water temperature （SWT） is an important indicator of lake state relative to its water chemistry and aquatic ecosystem,in addition to being an important regional climate indicator.However,few literatures involving spatial-temporal changes of lake SWT in the Qinghai-Tibet Plateau,including Qinghai Lake,are available.Our objective is to study the spatial-temporal changes in SWT of Qinghai Lake from 2001 to 2010,using Moderate-resolution Imaging Spectroradiometer （MODIS） data.Based on each pixel,we calculated the temporal SWT variations and long-term trends,compared the spatial patterns of annual average SWT in different years,and mapped and analyzed the seasonal cycles of the spatial patterns of SWT.The results revealed that the differences between the average daily SWT and air temperature during the temperature decreasing phase were relatively larger than those during the temperature increasing phase.The increasing rate of the annual average SWT during the study period was about 0.01℃/a,followed by an increasing rate of about 0.05℃/a in annual average air temperature.The annual average SWT from 2001 to 2010 showed similar spatial patterns,while the SWT spatial changes from January to December demonstrated an interesting seasonal reversion pattern.The high-temperature area transformed stepwise from the south to the north regions and then back to the south region from January to December,whereas the low-temperature area demonstrated a reversed annual cyclical trace.The spatial-temporal patterns of SWTs were shaped by the topography of the lake basin and the distribution of drainages.展开更多
Using the methods of combining landscape ecology with GIS spatial analysis, this paper analyses the dynamics of the marsh landscape structure of the Sanjiang Plain in the past 20 years, fu...Using the methods of combining landscape ecology with GIS spatial analysis, this paper analyses the dynamics of the marsh landscape structure of the Sanjiang Plain in the past 20 years, furthermore, taking Fujin County, located in the north of the plain, as an example, analyzes the conversion between marsh and other land use types. It is shown that the marsh in the Sanjiang Plain decreased greatly in the past 20 years, but the trend has begun to reverse. The marsh area decreased by 51.33% from 1980 to 1996, whereas it decreased by 4.19% from 1996 to 2000. The fragmentation of the marsh increased; the number of the patches increased by 326 from 1986 to 1996, whereas it only increased by 18 patches from 1996 to 2000. It is obvious that the speed of patches number diminished and the marsh fragmentation decreased, which shows that the reclamation of the marsh converted from the fragmentation to the brim in a large area of the marsh. The reclaimed marsh has mainly converted to paddy field and dry land. Large-scale reclamation in the Sanjiang Plain influences its natural environment directly: the climate of the region turns from cold and wet to warm and dry, which makes the marsh both in the low-temperature northern part and in the deeply stagnant eastern part suitable for further agricultural development.展开更多
The Qinghai-Tibet Plateau(QTP)has the largest and highest alpine grassland ecosystem in the world,which is considered to be the most sensitive and vulnerable ecosystem to climate change.Its dynamic changes and driving...The Qinghai-Tibet Plateau(QTP)has the largest and highest alpine grassland ecosystem in the world,which is considered to be the most sensitive and vulnerable ecosystem to climate change.Its dynamic changes and driving mechanism have always been widely researched.The Qomolangma National Nature Preserve(QNNP),with the largest altitude difference in the world,was selected as the study area to analyse the spatial-temporal dynamics of grassland coverage and the different characteristics of elevation gradients at the southern slope(SS)and northern slope(NS)with MODIS MOD13Q1 NDVI and MOD11A2 land surface temperature data from 2000to 2019 using the Mann-Kendall trend test and Theil-Sen slope methods.Further,the response mechanism of grassland coverage to climate warming is discussed.The results revealed that from 2000 to 2019,the grassland coverage change in the study area is mainly stable.The increased area proportion of grassland coverage on the southern slope is significantly higher than that on the northern slope,and the decreased area proportion of grassland coverage on the northern slope is significantly greater than that on the southern slope.The change characteristics of grassland coverage in the QNNP exhibit an obvious elevation gradient;the higher the elevation,the greater the increased area proportion of grassland coverage,particularly on the SS.The land surface temperature can be used as a proxy for analysing the temporal and spatial variation trends of air temperature in the QNNP.With the increase of the altitude,the land surface temperature rise rate on both the southern slope and northern slope exhibited an increasing trend,and the sensitivity of grassland coverage to temperature rise was higher on the northern slope.The water condition was the decisive factor for the horizontal and vertical spatial heterogeneity of the dynamic change of grassland coverage,and the melting of glaciers and thawing of permafrost were important sources of water for grassland growth in the QNNP.Climate warming promotes the growth of grassland in areas with a sufficient water supply,but adversely affects the growth of grassland in areas with insufficient water supplies,which will be further intensified by human activities.展开更多
The identification of runoff generating areas (RGAs) within a watershed is a difficult task because of their temporal and spatial behavior. A watershed was selected to investigate the RGAs to determine the factors aff...The identification of runoff generating areas (RGAs) within a watershed is a difficult task because of their temporal and spatial behavior. A watershed was selected to investigate the RGAs to determine the factors affecting spatio-temporally in southern Ontario. The watershed was divided into 8 fields having a Wireless System Network (WSN) and a V-notch weir for flow and soil moisture measurements. The results show that surface runoff is generated by the infiltration excess mechanism in summer and fall, and the saturation excess mechanism in spring. The statistical analysis suggested that the amount of rainfall and rainfall intensity for summer (R2 = 0.63, 0.82) and fall (R2 = 0.74, 0.80), respectively, affected the RGAs. The analysis showed that 15% area generated 85% of surface runoff in summer, 100% of runoff in fall, and 40% of runoff in spring. The methodology developed has potential for identifying RGAs for protecting Ontario’s water resources.展开更多
As a significant city in the Yangtze River Delta regions,Hefei has experienced rapid changes in the sources of air pollution due to its high-speed economic development and urban expansion.However,there has been limite...As a significant city in the Yangtze River Delta regions,Hefei has experienced rapid changes in the sources of air pollution due to its high-speed economic development and urban expansion.However,there has been limited research in recent years on the spatial-temporal distribution and emission of its atmospheric pollutants.To address this,this study conducted mobile observations of urban roads using the Mobile-DOAS instrument from June 2021 to May 2022.The monitoring results exhibit a favourable consistent with TROPOMI satellite data and ground monitoring station data.Temporally,there were pronounced seasonal variations in air pollutants.Spatially,high concentration of HCHO and NO_(2)were closely associated with traffic congestion on roadways,while heightened SO_(2)levels were attributed to winter heating and industrial emissions.The study also revealed that with the implementation of road policies,the average vehicle speed increased by 95.4%,while the NO concentration decreased by 54.4%.In the estimation of urban NO_(x)emission flux,it was observed that in temporal terms,compared with inventory data,the emissions calculated viamobile measurements exhibitedmore distinct seasonal patterns,with the highest emission rate of 349 g/sec in winter and the lowest of 142 g/sec in summer.In spatial terms,the significant difference in emissions between the inner and outer ring roads also suggests the presence of the city’s primary NO_(x)emission sources in the area between these two rings.This study offers data support for formulating the next phase of air pollution control measures in urban areas.展开更多
It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be...It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.展开更多
The hot deformation behavior of Pt−10Ir alloy was studied under a wide range of deformation parameters.At a low deformation temperature(950−1150℃),the softening mechanism is primarily dynamic recovery.In addition,dyn...The hot deformation behavior of Pt−10Ir alloy was studied under a wide range of deformation parameters.At a low deformation temperature(950−1150℃),the softening mechanism is primarily dynamic recovery.In addition,dynamic recrystallization by progressive lattice rotation near grain boundaries(DRX by LRGBs)and microshear bands assisted dynamic recrystallization(MSBs assisted DRX)coordinate the deformation.However,it is difficult for the dynamic softening to offset the stain hardening due to a limited amount of DRXed grains.At a high deformation temperature(1250−1350℃),three main DRX mechanisms associated with strain rates occur:DRX by LRGBs,DRX by a homogeneous increase in misorientation(HIM)and geometric DRX(GDRX).With increasing strain,DRX by LRGBs is enhanced gradually under high strain rates;the“pinch-off”effect is enhanced at low strain rates,which was conducive to the formation of a uniform and fine microstructure.展开更多
Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects s...Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.展开更多
In dynamic scenarios,visual simultaneous localization and mapping(SLAM)algorithms often incorrectly incorporate dynamic points during camera pose computation,leading to reduced accuracy and robustness.This paper prese...In dynamic scenarios,visual simultaneous localization and mapping(SLAM)algorithms often incorrectly incorporate dynamic points during camera pose computation,leading to reduced accuracy and robustness.This paper presents a dynamic SLAM algorithm that leverages object detection and regional dynamic probability.Firstly,a parallel thread employs the YOLOX object detectionmodel to gather 2D semantic information and compensate for missed detections.Next,an improved K-means++clustering algorithm clusters bounding box regions,adaptively determining the threshold for extracting dynamic object contours as dynamic points change.This process divides the image into low dynamic,suspicious dynamic,and high dynamic regions.In the tracking thread,the dynamic point removal module assigns dynamic probability weights to the feature points in these regions.Combined with geometric methods,it detects and removes the dynamic points.The final evaluation on the public TUM RGB-D dataset shows that the proposed dynamic SLAM algorithm surpasses most existing SLAM algorithms,providing better pose estimation accuracy and robustness in dynamic environments.展开更多
In this work,fow behavior and dynamic recrystallization(DRX)mechanism of a low carbon martensitic stainless bearing steel,CSS-42L,were investigated using a thermomechanical simulator under the temperature and strain r...In this work,fow behavior and dynamic recrystallization(DRX)mechanism of a low carbon martensitic stainless bearing steel,CSS-42L,were investigated using a thermomechanical simulator under the temperature and strain rate ranges of 900 to 1100℃ and 0.1 to 20 s^(−1),respectively.The Arrhenius-type constitutive equation was established based on the fow stress curves.Moreover,the peak stress decreased with the increase in deformation temperature and the decrease in strain rate.There were two DRX mechanisms during hot deformation of the current studied steel,the main one being discontinuous dynamic recrystallization mechanism,acting through grain boundary bulging and migration,and the auxiliary one being continuous dynamic recrystallization mechanism,working through the rotation of sub-grains.On the basis of microstructural characterizations,power dissipation maps and fow instability maps,the optimized hot deformation parameters for CSS-42L bearing steel were determined as 1050℃/0.1 s^(−1) and 1100℃/1 s^(−1).展开更多
Traumatic brain injury(TBI)is a public health problem with an undue economic burden that impacts nearly every age,ethnic,and gender group across the globe(Capizzi et al.,2020).TBIs are often sustained during a dynamic...Traumatic brain injury(TBI)is a public health problem with an undue economic burden that impacts nearly every age,ethnic,and gender group across the globe(Capizzi et al.,2020).TBIs are often sustained during a dynamic range of exposures to energetic environmental forces and as such outcomes are typically heterogeneous regarding severity and pathology(Capizzi et al.,2020).展开更多
Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare ...Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.展开更多
Rockbursts, which mainly affect mining roadways, are dynamic disasters arising from the surrounding rock under high stress. Understanding the interaction between supports and the surrounding rock is necessary for effe...Rockbursts, which mainly affect mining roadways, are dynamic disasters arising from the surrounding rock under high stress. Understanding the interaction between supports and the surrounding rock is necessary for effective rockburst control. In this study, the squeezing behavior of the surrounding rock is analyzed in rockburst roadways, and a mechanical model of rockbursts is established considering the dynamic support stress, thus deriving formulas and providing characteristic curves for describing the interaction between the support and surrounding rock. Design principles and parameters of supports for rockburst control are proposed. The results show that only when the geostress magnitude exceeds a critical value can it drive the formation of rockburst conditions. The main factors influencing the convergence response and rockburst occurrence around roadways are geostress, rock brittleness, uniaxial compressive strength, and roadway excavation size. Roadway support devices can play a role in controlling rockburst by suppressing the squeezing evolution of the surrounding rock towards instability points of rockburst. Further, the higher the strength and the longer the impact stroke of support devices with constant resistance, the more easily multiple balance points can be formed with the surrounding rock to control rockburst occurrence. Supports with long impact stroke allow adaptation to varying geostress levels around the roadway, aiding in rockburst control. The results offer a quantitative method for designing support systems for rockburst-prone roadways. The design criterion of supports is determined by the intersection between the convergence curve of the surrounding rock and the squeezing deformation curve of the support devices.展开更多
Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-...Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.展开更多
Background Hexafluoropropylene oxide dimer acid(GenX),a substitute for per-and polyfluoroalkyl substances,has been widely detected in various environmental matrices and foods recently,attracting great attention.Howeve...Background Hexafluoropropylene oxide dimer acid(GenX),a substitute for per-and polyfluoroalkyl substances,has been widely detected in various environmental matrices and foods recently,attracting great attention.However,a systematic characterization of its reproductive toxicity is still missing.This study aims to explore the male reproductive toxicity caused by GenX exposure and the potential cellular and molecular regulatory mechanisms behind it.Results Normally developing mice were exposed to GenX,and testicular tissue was subsequently analyzed and validated using single-cell RNA sequencing.Our results revealed that GenX induced severe testicular damage,disrupted the balance between undifferentiated and differentiated spermatogonial stem cells,and led to strong variation in the cellular dynamics of spermatogenesis.Furthermore,GenX exposure caused global upregulation of testicular somatic cellular inflammatory responses,increased abnormal macrophage differentiation,and attenuated fibroblast adhesion,disorganizing the somatic-germline interactions.Conclusions In conclusion,this study revealed complex cellular dynamics and transcriptome changes in mouse testis after GenX exposure,providing a valuable resource for understanding its reproductive toxicity.展开更多
The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is great...The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.展开更多
文摘Tuberculosis(TB)remained the first leading cause of death from a single infectious agent worldwide in 2023,resulting in nearly twice as many deaths as those caused by the human immunodeficiency virus/acquired immune deficiency syndrome.An estimated 10.8 million TB cases were reported globally in 2023,with approximately 1.25 million associated deaths.In China,which ranks third in the global TB burden,there were approximately 741,000 new cases and 25,000 deaths in 2023^([1]).TB poses a significant threat to human health worldwide.
基金Under the auspices of Fundamental Research Funds for the Central University(No.310827171012)National Natural Science Foundation of China(No.41971178+4 种基金3167054931170664)National Key Research&Development Program of China(2017YFC0504705)Open Fund of Shaanxi Key Laboratory of Earth Surface System and Environmental Carrying Capacity(No.SKLESS201807)Key Research&Development Program of Shaanxi Province(No.2019SF-245)
文摘The change in land development intensity is an important perspective to reflect the variation in regional social and economic development and spatial differentiation.In this paper,spatial statistical analysis,Ordinary Least Squares(OLS),and Geographically weighted regression(GWR)methods are used to systematically analyse the spatial-temporal characteristics and driving forces of land development intensity for 131 spatial units in the western China from 2000 to 2015.The findings of the study are as follows:1)The land development intensity in the western China has been increasing rapidly.From 2000 to 2015,land development intensity increased by 3.4 times on average.2)The hotspot areas have shifted from central Inner Mongolia,northern Shaanxi and the Beibu Gulf of Guangxi to the Guanzhong Plain and the Chengdu-Chongqing urban agglomeration.The areas of cold spots were mainly concentrated in the Qinghai-Tibet Plateau,Yunnan,and Xinjiang.3)Investment intensity and the natural environment have always been the main drivers of land development intensity in the western China.Investment played a powerful role in promoting land development intensity,while the natural and ecological environment distinctly constrained such development.The effect of the economic factors on land development intensity in the western China has changed,which is reflected in the driving factor of construction land development shifting from economic growth in 2000 to economic structure,especially industrial structure,in 2015.
基金Under the auspices ofthe National Natural Science Foundation of China (No .40301038)
文摘The dynamics of regional convergence include spatial and temporal dimensions. Spatial Markov chain can be used to explore how regions evolve by considering both individual regions and their geographic neighbors. Based on per capita GDP data set of 77 counties from 1978 to 2000, this paper attempts to investigate the spatial-temporal dynamics of regional convergence in Jiangsu. First, traditional Markov matrix for five per capita GDP classes is constructed for later comparison. Moreover, each region’s spatial lag is derived by averaging all its neighbors’ per capita GDP data. Conditioning on per capita GDP class of its spatial lag at the beginning of each year, spatial Markov transition probabilities of each region are calculated accordingly. Quantitatively, for a poor region, the probability of moving upward is 3.3% if it is surrounded by its poor neighbors, and even increases to 18.4% if it is surrounded by its rich neighbors, but it goes down to 6.2% on average if ignoring regional context. For a rich region, the probability of moving down ward is 1.2% if it is surrounded by its rich neighbors, but increases to 3.0% if it is surrounded by its poor neighbors, and averages 1.5% irrespective of regional context. Spatial analysis of regional GDP class transitions indicates those 10 upward moves of both regions and their neighbors are unexceptionally located in the southern Jiangsu, while downward moves of regions or their neighbors are almost in the northern Jiangsu. These empirical results provide a spatial explanation to the "convergence clubs" detected by traditional Markov chain.
基金supported by the Opening Foundation of the State Key Laboratory Breeding Base of Desertification and Aeolian Sand Disaster Combating,Gansu Desert Control Research Institute (GSDC201503)the National Natural Science Foundation of China (41271024,31260129,31360204)+1 种基金the Program for Innovative Research Group of Gansu Province,China (1506RJIA155)Lanzhou University for providing Arc GIS technical support in the data processing
文摘Analysis of spatial-temporal variations of desert vegetation under the background of climate changes can provide references for ecological restoration in arid and semi-arid areas. In this study, we used the Global Inventory Modeling and Mapping Studies （GIMMS） NDVI data from 1982 to 2006 and Moderate Resolution Imaging Spectroradiometer （MODIS） NDVI data from 2000 to 2013 to reveal the dynamics of desert vegetation in Hexi region of Northwest China over the past three decades. We also used the annual temperature and precipitation data acquired from the Chinese meteorological stations to analyze the response of desert vegetation to climatic variations. The average value of NDVImax （the maximum NDVI during the growing season） for desert vegetation in Hexi region increased at the rate of 0.65x10-3/a （P〈0.05） from 1982 to 2013, and the significant increases of NDVImax mainly appeared in the typical desert vegetation areas. Vegetation was significantly improved in the lower reaches of Shule and Shiyang river basins, and the weighted mean center of desert vegetation mainly shifted toward the lower reaches of the two basins. Almost 95.32% of the total desert vegetation area showed positive correlation between NDVImax and annual precipitation, indicating that precipitation is the key factor for desert vegetation growth in the entire study area. Moreover, the areas with non-significant positive correlation between NDVImax and annual precipitation mainly located in the lower reaches of Shiyang and Shule river basins, this may be due to human activities. Only 7.64% of the desert vegetation showed significant positive correlation between NDVImax and annual precipitation in the Shule River Basin （an extremely arid area）, indicating that precipitation is not the most important factor for vegetation growth in this basin, and further studies are needed to investigate the mechanism for this phenomenon.
基金supported by the National Basic Research Program of China(2012CB417001)the National Natural Science Foundation of China(41271125)
文摘Lake surface water temperature （SWT） is an important indicator of lake state relative to its water chemistry and aquatic ecosystem,in addition to being an important regional climate indicator.However,few literatures involving spatial-temporal changes of lake SWT in the Qinghai-Tibet Plateau,including Qinghai Lake,are available.Our objective is to study the spatial-temporal changes in SWT of Qinghai Lake from 2001 to 2010,using Moderate-resolution Imaging Spectroradiometer （MODIS） data.Based on each pixel,we calculated the temporal SWT variations and long-term trends,compared the spatial patterns of annual average SWT in different years,and mapped and analyzed the seasonal cycles of the spatial patterns of SWT.The results revealed that the differences between the average daily SWT and air temperature during the temperature decreasing phase were relatively larger than those during the temperature increasing phase.The increasing rate of the annual average SWT during the study period was about 0.01℃/a,followed by an increasing rate of about 0.05℃/a in annual average air temperature.The annual average SWT from 2001 to 2010 showed similar spatial patterns,while the SWT spatial changes from January to December demonstrated an interesting seasonal reversion pattern.The high-temperature area transformed stepwise from the south to the north regions and then back to the south region from January to December,whereas the low-temperature area demonstrated a reversed annual cyclical trace.The spatial-temporal patterns of SWTs were shaped by the topography of the lake basin and the distribution of drainages.
基金Knowledge Innovation Project of CAS No. KZCX2-308-3-5 No. INF105-SBD-1-24
文摘Using the methods of combining landscape ecology with GIS spatial analysis, this paper analyses the dynamics of the marsh landscape structure of the Sanjiang Plain in the past 20 years, furthermore, taking Fujin County, located in the north of the plain, as an example, analyzes the conversion between marsh and other land use types. It is shown that the marsh in the Sanjiang Plain decreased greatly in the past 20 years, but the trend has begun to reverse. The marsh area decreased by 51.33% from 1980 to 1996, whereas it decreased by 4.19% from 1996 to 2000. The fragmentation of the marsh increased; the number of the patches increased by 326 from 1986 to 1996, whereas it only increased by 18 patches from 1996 to 2000. It is obvious that the speed of patches number diminished and the marsh fragmentation decreased, which shows that the reclamation of the marsh converted from the fragmentation to the brim in a large area of the marsh. The reclaimed marsh has mainly converted to paddy field and dry land. Large-scale reclamation in the Sanjiang Plain influences its natural environment directly: the climate of the region turns from cold and wet to warm and dry, which makes the marsh both in the low-temperature northern part and in the deeply stagnant eastern part suitable for further agricultural development.
基金supported by the Second Tibetan Plateau Scientific Expedition and Research Program(Grant Nos.2019QZKK0301 and 2019QZKK0307)。
文摘The Qinghai-Tibet Plateau(QTP)has the largest and highest alpine grassland ecosystem in the world,which is considered to be the most sensitive and vulnerable ecosystem to climate change.Its dynamic changes and driving mechanism have always been widely researched.The Qomolangma National Nature Preserve(QNNP),with the largest altitude difference in the world,was selected as the study area to analyse the spatial-temporal dynamics of grassland coverage and the different characteristics of elevation gradients at the southern slope(SS)and northern slope(NS)with MODIS MOD13Q1 NDVI and MOD11A2 land surface temperature data from 2000to 2019 using the Mann-Kendall trend test and Theil-Sen slope methods.Further,the response mechanism of grassland coverage to climate warming is discussed.The results revealed that from 2000 to 2019,the grassland coverage change in the study area is mainly stable.The increased area proportion of grassland coverage on the southern slope is significantly higher than that on the northern slope,and the decreased area proportion of grassland coverage on the northern slope is significantly greater than that on the southern slope.The change characteristics of grassland coverage in the QNNP exhibit an obvious elevation gradient;the higher the elevation,the greater the increased area proportion of grassland coverage,particularly on the SS.The land surface temperature can be used as a proxy for analysing the temporal and spatial variation trends of air temperature in the QNNP.With the increase of the altitude,the land surface temperature rise rate on both the southern slope and northern slope exhibited an increasing trend,and the sensitivity of grassland coverage to temperature rise was higher on the northern slope.The water condition was the decisive factor for the horizontal and vertical spatial heterogeneity of the dynamic change of grassland coverage,and the melting of glaciers and thawing of permafrost were important sources of water for grassland growth in the QNNP.Climate warming promotes the growth of grassland in areas with a sufficient water supply,but adversely affects the growth of grassland in areas with insufficient water supplies,which will be further intensified by human activities.
文摘The identification of runoff generating areas (RGAs) within a watershed is a difficult task because of their temporal and spatial behavior. A watershed was selected to investigate the RGAs to determine the factors affecting spatio-temporally in southern Ontario. The watershed was divided into 8 fields having a Wireless System Network (WSN) and a V-notch weir for flow and soil moisture measurements. The results show that surface runoff is generated by the infiltration excess mechanism in summer and fall, and the saturation excess mechanism in spring. The statistical analysis suggested that the amount of rainfall and rainfall intensity for summer (R2 = 0.63, 0.82) and fall (R2 = 0.74, 0.80), respectively, affected the RGAs. The analysis showed that 15% area generated 85% of surface runoff in summer, 100% of runoff in fall, and 40% of runoff in spring. The methodology developed has potential for identifying RGAs for protecting Ontario’s water resources.
基金supported by the National Natural Science Foundation of China(Nos.U19A2044,42105132,42030609,41975037,and 42105133)the National Key Research and Development Program of China(No.2022YFC3703502)+1 种基金the Plan for Anhui Major Provincial Science&Technology Project(No.202203a07020003)Hefei Ecological Environment Bureau Project(No.2020BFFFD01804).
文摘As a significant city in the Yangtze River Delta regions,Hefei has experienced rapid changes in the sources of air pollution due to its high-speed economic development and urban expansion.However,there has been limited research in recent years on the spatial-temporal distribution and emission of its atmospheric pollutants.To address this,this study conducted mobile observations of urban roads using the Mobile-DOAS instrument from June 2021 to May 2022.The monitoring results exhibit a favourable consistent with TROPOMI satellite data and ground monitoring station data.Temporally,there were pronounced seasonal variations in air pollutants.Spatially,high concentration of HCHO and NO_(2)were closely associated with traffic congestion on roadways,while heightened SO_(2)levels were attributed to winter heating and industrial emissions.The study also revealed that with the implementation of road policies,the average vehicle speed increased by 95.4%,while the NO concentration decreased by 54.4%.In the estimation of urban NO_(x)emission flux,it was observed that in temporal terms,compared with inventory data,the emissions calculated viamobile measurements exhibitedmore distinct seasonal patterns,with the highest emission rate of 349 g/sec in winter and the lowest of 142 g/sec in summer.In spatial terms,the significant difference in emissions between the inner and outer ring roads also suggests the presence of the city’s primary NO_(x)emission sources in the area between these two rings.This study offers data support for formulating the next phase of air pollution control measures in urban areas.
文摘It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.
基金financial supports from the National Natural Science Foundation of China(Nos.52161023,51901204)Science and Technology Project of Yunnan Precious Metal Laboratory,China(No.YPML-2023050208)+1 种基金Yunnan Science and Technology Planning Project,China(Nos.202201AU070010,202301AT070276,202302AB080008,202303AA080001)Postgraduate Research and Innovation Foundation of Yunnan University,China(No.2021Y338).
文摘The hot deformation behavior of Pt−10Ir alloy was studied under a wide range of deformation parameters.At a low deformation temperature(950−1150℃),the softening mechanism is primarily dynamic recovery.In addition,dynamic recrystallization by progressive lattice rotation near grain boundaries(DRX by LRGBs)and microshear bands assisted dynamic recrystallization(MSBs assisted DRX)coordinate the deformation.However,it is difficult for the dynamic softening to offset the stain hardening due to a limited amount of DRXed grains.At a high deformation temperature(1250−1350℃),three main DRX mechanisms associated with strain rates occur:DRX by LRGBs,DRX by a homogeneous increase in misorientation(HIM)and geometric DRX(GDRX).With increasing strain,DRX by LRGBs is enhanced gradually under high strain rates;the“pinch-off”effect is enhanced at low strain rates,which was conducive to the formation of a uniform and fine microstructure.
基金funded by the National Natural Science Foundation of China Youth Fund(Grant No.62304022)Science and Technology on Electromechanical Dynamic Control Laboratory(China,Grant No.6142601012304)the 2022e2024 China Association for Science and Technology Innovation Integration Association Youth Talent Support Project(Grant No.2022QNRC001).
文摘Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.
基金the National Natural Science Foundation of China(No.62063006)to the Guangxi Natural Science Foundation under Grant(Nos.2023GXNSFAA026025,AA24010001)+3 种基金to the Innovation Fund of Chinese Universities Industry-University-Research(ID:2023RY018)to the Special Guangxi Industry and Information Technology Department,Textile and Pharmaceutical Division(ID:2021 No.231)to the Special Research Project of Hechi University(ID:2021GCC028)to the Key Laboratory of AI and Information Processing,Education Department of Guangxi Zhuang Autonomous Region(Hechi University),No.2024GXZDSY009。
文摘In dynamic scenarios,visual simultaneous localization and mapping(SLAM)algorithms often incorrectly incorporate dynamic points during camera pose computation,leading to reduced accuracy and robustness.This paper presents a dynamic SLAM algorithm that leverages object detection and regional dynamic probability.Firstly,a parallel thread employs the YOLOX object detectionmodel to gather 2D semantic information and compensate for missed detections.Next,an improved K-means++clustering algorithm clusters bounding box regions,adaptively determining the threshold for extracting dynamic object contours as dynamic points change.This process divides the image into low dynamic,suspicious dynamic,and high dynamic regions.In the tracking thread,the dynamic point removal module assigns dynamic probability weights to the feature points in these regions.Combined with geometric methods,it detects and removes the dynamic points.The final evaluation on the public TUM RGB-D dataset shows that the proposed dynamic SLAM algorithm surpasses most existing SLAM algorithms,providing better pose estimation accuracy and robustness in dynamic environments.
基金fnancially supported by the Scientifc Research Project of the Department of Education in Hunan Prov ince,China(Grant No.23B0533).
文摘In this work,fow behavior and dynamic recrystallization(DRX)mechanism of a low carbon martensitic stainless bearing steel,CSS-42L,were investigated using a thermomechanical simulator under the temperature and strain rate ranges of 900 to 1100℃ and 0.1 to 20 s^(−1),respectively.The Arrhenius-type constitutive equation was established based on the fow stress curves.Moreover,the peak stress decreased with the increase in deformation temperature and the decrease in strain rate.There were two DRX mechanisms during hot deformation of the current studied steel,the main one being discontinuous dynamic recrystallization mechanism,acting through grain boundary bulging and migration,and the auxiliary one being continuous dynamic recrystallization mechanism,working through the rotation of sub-grains.On the basis of microstructural characterizations,power dissipation maps and fow instability maps,the optimized hot deformation parameters for CSS-42L bearing steel were determined as 1050℃/0.1 s^(−1) and 1100℃/1 s^(−1).
文摘Traumatic brain injury(TBI)is a public health problem with an undue economic burden that impacts nearly every age,ethnic,and gender group across the globe(Capizzi et al.,2020).TBIs are often sustained during a dynamic range of exposures to energetic environmental forces and as such outcomes are typically heterogeneous regarding severity and pathology(Capizzi et al.,2020).
文摘Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.
基金funded by the National Natural Science Foundation of China (No. 52304133)the National Key R&D Program of China (No. 2022YFC3004605)the Department of Science and Technology of Liaoning Province (No. 2023-BS-083)。
文摘Rockbursts, which mainly affect mining roadways, are dynamic disasters arising from the surrounding rock under high stress. Understanding the interaction between supports and the surrounding rock is necessary for effective rockburst control. In this study, the squeezing behavior of the surrounding rock is analyzed in rockburst roadways, and a mechanical model of rockbursts is established considering the dynamic support stress, thus deriving formulas and providing characteristic curves for describing the interaction between the support and surrounding rock. Design principles and parameters of supports for rockburst control are proposed. The results show that only when the geostress magnitude exceeds a critical value can it drive the formation of rockburst conditions. The main factors influencing the convergence response and rockburst occurrence around roadways are geostress, rock brittleness, uniaxial compressive strength, and roadway excavation size. Roadway support devices can play a role in controlling rockburst by suppressing the squeezing evolution of the surrounding rock towards instability points of rockburst. Further, the higher the strength and the longer the impact stroke of support devices with constant resistance, the more easily multiple balance points can be formed with the surrounding rock to control rockburst occurrence. Supports with long impact stroke allow adaptation to varying geostress levels around the roadway, aiding in rockburst control. The results offer a quantitative method for designing support systems for rockburst-prone roadways. The design criterion of supports is determined by the intersection between the convergence curve of the surrounding rock and the squeezing deformation curve of the support devices.
基金financially supported by the National Key Re-search and Development Program of China(No.2021YFB3702604)the National Natural Science Foundation of China(No.52174377)+1 种基金the Chongqing Natural Science Foundation Project(No.CSTB2023NSCQ-MSX0824)This work was also supported by the Shaanxi Materials Analysis&Research Center and the Analytical&Testing Center of NPU.
文摘Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.
基金supported by the Guangdong Provincial Key Area Research and Development Program[grant number 2022B0202090002]China Postdoctoral Science Foundation[grant number 2024M760977].
文摘Background Hexafluoropropylene oxide dimer acid(GenX),a substitute for per-and polyfluoroalkyl substances,has been widely detected in various environmental matrices and foods recently,attracting great attention.However,a systematic characterization of its reproductive toxicity is still missing.This study aims to explore the male reproductive toxicity caused by GenX exposure and the potential cellular and molecular regulatory mechanisms behind it.Results Normally developing mice were exposed to GenX,and testicular tissue was subsequently analyzed and validated using single-cell RNA sequencing.Our results revealed that GenX induced severe testicular damage,disrupted the balance between undifferentiated and differentiated spermatogonial stem cells,and led to strong variation in the cellular dynamics of spermatogenesis.Furthermore,GenX exposure caused global upregulation of testicular somatic cellular inflammatory responses,increased abnormal macrophage differentiation,and attenuated fibroblast adhesion,disorganizing the somatic-germline interactions.Conclusions In conclusion,this study revealed complex cellular dynamics and transcriptome changes in mouse testis after GenX exposure,providing a valuable resource for understanding its reproductive toxicity.
基金supported and financed by Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology (No.2024yjrc96)Anhui Provincial University Excellent Research and Innovation Team Support Project (No.2022AH010053)+2 种基金National Key Research and Development Program of China (Nos.2023YFC2907602 and 2022YFF1303302)Anhui Provincial Major Science and Technology Project (No.202203a07020011)Open Foundation of Joint National-Local Engineering Research Centre for Safe and Precise Coal Mining (No.EC2023020)。
文摘The generalized rheological tests on sandstone were conducted under both dynamic stress and seepage fields.The results demonstrate that the rheological strain of the specimen under increased stress conditions is greater than that under creep conditions,indicating that the dynamic stress field significantly influences the rheological behaviours of sandstone.Following the rheological tests,the number of small pores in the sandstone decreased,while the number of medium-sized pores increased,forming new seepage channels.The high initial rheological stress accelerated fracture compression and the closure of seepage channels,resulting in reduction in the permeability of sandstone.Based on the principles of generalized rheology and the experimental findings,a novel rock rheological constitutive model incorporating both the dynamic stress field and seepage properties has been developed.Numerical simulations of surrounding rock deformation in geotechnical engineering were carried out using a secondary development version of this model,which confirmed the applicability of the generalized rheological numerical simulation method.These results provide theoretical support for the long-term stability evaluation of engineering rock masses and for predicting the deformation of surrounding rock.
