Vegetation plays a major role in soil protection against erosion effects,and studies have also highlighted its importance in retaining sediments from roadside slopes.Yet,hydro-sedimentological studies under natural pr...Vegetation plays a major role in soil protection against erosion effects,and studies have also highlighted its importance in retaining sediments from roadside slopes.Yet,hydro-sedimentological studies under natural precipitation conditions are still scarce in semi-arid areas due to difficulties in monitoring the few and very concentrated precipitation events.Quantifying sediment connectivity and yield at watershed scale,often highly impacted by the erosion of unpaved roads,is necessary for management plans.This study aims to evaluate the efficiency of native vegetation on roadside slope segments in Caatinga biome in retaining sediments and conserving the soil in a semi-arid area of Brazil.Surface runoff,sediment concentration,and yield measurements were measured from 34 natural precipitation events in four years on two slopes with and without vegetation.The runoff coefficients of the plot with no vegetation varied from 3.0%to 58.0%,while in the vegetated plot,they showed variation from 1.0%to 21.0%.The annual specific sediment yield ranged from 4.6 to 138.7 kg/(hm^(2)•a)for the vegetated plot and from 34.9 to 608.5 kg/(hm^(2)•a)for the unvegetated one.These results indicate a 4 to 12 times higher soil loss on the unvegetated slope in relation to the vegetated one and demonstrate that natural Caatinga vegetation acts as an effective barrier against surface-transported sediments.Moreover,natural Caatinga vegetation present on the slope plays an important role in breaking connectivity between sediment flows from unpaved roads and the watershed drainage system.These findings indicate that investments in unpaved road and roadside slope restoration,not only enhance road infrastructure but also promote environmental gains by reducing the impact of erosion.展开更多
Reliability analysis of soil slopes under rainfall is an important task for landslide risk assessment.Previous studies rarely contribute to the probabilistic analysis of slope stability under rainfall with reinforceme...Reliability analysis of soil slopes under rainfall is an important task for landslide risk assessment.Previous studies rarely contribute to the probabilistic analysis of slope stability under rainfall with reinforcement.A new method is suggested for reliability analysis of soil slopes stabilized with piles under rainfall.First,an efficient numerical model is exploited for slope stability analysis,where two types of slope failure modes,i.e.,plastic flow and local failure are considered.To address the blocking effect of piles during seepage analysis,the equivalent hydraulic conductivity of the pile area is estimated according to the effective medium theory.The stabilizing force of piles is investigated by an analytical approach.For saving computational effort,the response surface is established based on a multi-class classification model to predict two types of slope failure modes.Finally,uncertainties in soil parameters and rainfall events are both modelled,and the failure probability of soil slopes within a given time period is assessed through Monte Carlo simulation.An illustrative example is used to demonstrate the performance of the suggested method.It is found that the slope is mainly controlled by local failure.As the pile spacing increases,the likelihood of plastic flow significantly increases.As the piles are located near the slope crest,plastic flow is effectively prevented and the slope is better stabilized against rainfall.If rainfall uncertainties are not considered,the slope failure probability is significantly overestimated.Overall,this study can provide a useful guidance for the design of pile-stabilized slopes against rainfall infiltration.展开更多
The municipality of Hammam N’bails,located 37 km east of the capital of Guelma province(eastern Algeria),is accessible via RN20 and CW19 roads.It borders the municipalities of Khemissa and El Henancha in Souk-Ahras p...The municipality of Hammam N’bails,located 37 km east of the capital of Guelma province(eastern Algeria),is accessible via RN20 and CW19 roads.It borders the municipalities of Khemissa and El Henancha in Souk-Ahras province.With a population of approximately 16,000 and covering an area of 164 km²,this region is characterized by mountainous terrain,with elevations ranging from 112 to 292 meters.The area experiences cold,snowy winters and hot,dry summers,with an average annual rainfall of about 600 mm.Renowned for its natural thermal springs,Hammam N’bails is also a notable tourist destination.The rugged topography of the region leads to frequent landslides,particularly on medium and low slopes.Landslide susceptibility is assessed using raster calculators in ArcGIS and efficient machine learning algorithms,such as Decision Trees,Bagging,Random Forest,SVM,and MLP.Factors considered in the analysis include slope,elevation,geology,aspect,proximity to streams and roads,land cover,and rainfall.The performance of these models is evaluated using ROC-AUC curves,providing a robust method to understand and mitigate geological risks in this area.展开更多
Weak interlayers play a crucial role in the seismic performance of bedding slopes;however,the effects of structural surface development within these layers remain underexplored.This study presents two scaled models of...Weak interlayers play a crucial role in the seismic performance of bedding slopes;however,the effects of structural surface development within these layers remain underexplored.This study presents two scaled models of bedding slopes,each with different weak interlayers:one with a homogeneous weak layer and another with discontinuous interfaces.Shaking table tests were conducted to compare their seismic performance.The results show that the peak ground acceleration(PGA)values above the weak interlayer in model A were significantly higher than those in model B,with the differences increasing as the input wave amplitude increased.The peak earth pressure(PEP)values at the tensile failure boundary at the rear edge of model A were also higher,whereas those within the weak layer at the toe of model A were lower than those in model B.Deformation analysis revealed that the maximum principal strain in model A initially appeared at the upper part of the tensile failure boundary,while the maximum shear strain was concentrated near the rear edge within the weak layer.In contrast,model B exhibited the opposite strain distribution.These findings provide insight into the impact of weak interlayers on the dynamic response and deformation of bedding slopes,highlighting the importance of considering this factor in seismic landslide investigations and failure mode predictions.展开更多
0 INTRODUCTION Geohazards in mountainous regions pose significant risks to the construction and safe operation of transportation,water conservancy,and other critical infrastructure projects.Engineering geological inve...0 INTRODUCTION Geohazards in mountainous regions pose significant risks to the construction and safe operation of transportation,water conservancy,and other critical infrastructure projects.Engineering geological investigations are crucial for disaster prevention and mitigation.展开更多
The stability of reservoir bank slopes during the impoundment period has become a critical issue in the construction and operation of large-scale hydropower projects.A predictive and early warning method for reservoir...The stability of reservoir bank slopes during the impoundment period has become a critical issue in the construction and operation of large-scale hydropower projects.A predictive and early warning method for reservoir bank slopes is proposed,based on slip resistance stability evolution analysis.Using a refined three-dimensional numerical calculation model of the bank slope,the creep damage model is employed for simulation and analysis,enabling the derivation of stress field and strain field evolution from bank slope excavation to the long-term impoundment period.Subsequently,for the stress field of the bank slope at any given moment,the safety factors of the sliding blocks are determined by using the multigrid method and vector sum method.Accordingly,the evolutionary law of the sliding safety factor for the bank slope can be derived.By integrating the long-term stability evolution trend of the slope with specific engineering practices,the safety factors for graded warning can be determined.Based on the time correspondence,the graded warning moment and the deformation warning index for slope measurement points can be determined.In this study,the proposed method is applied to the left bank slope of the Jinping I Hydropower Station.The results indicate that from excavation to June 2022,the left bank slope exhibits a strong correlation with excavation elevation and the number of reservoir water cycles.The initial,maximum,and minimum safety factors are 2.01,3.07,and 1.58,respectively.The deep fracture SL44-1 serves as the primary stress-bearing slip surface of the left bank slope,while the safety margin of the fault f42-9 and lamprophyre X is slightly insufficient.Based on the long-term stability evolution trend of the slope and in accordance with relevant standards,the safety factors for graded warning indicators—K_(w1),K_(w2),K_(w3),and K_(w4)—are determined as 1.350,1.325,1.300,and 1.275,respectively.Correspondingly,the estimated warning times are 12/30/2066,12/30/2084,and 12/30/2120.Accordingly,the deformation graded warning indexes for slope measurement points are established.展开更多
The mound-making behavior of plateau zokors is one of the most important factors in remodeling meadow microtopography and causing soil erosion in the Yellow River source area of western China,but little is known about...The mound-making behavior of plateau zokors is one of the most important factors in remodeling meadow microtopography and causing soil erosion in the Yellow River source area of western China,but little is known about the effects of microtopography on particle size characteristics(PSC)of eroded sediments from the bare slopes of zokor mounds during different rainfall events.In this study,we analyzed the relationship of microtopographic features derived from laser point cloud data and PSC of eroded sediments at six simulated rainfall intensities(all lasting 60 min).The effects of microtopography on PSC of eroded sediments were studied via partial least squares regression(PLSR)and structural equation modeling(SEM).The results showed that:(1)15-20 minutes from the beginning of rainfall was the sensitive period of soil loss from the slopes,and the function relationship between the rate of sediment and runoff and rainfall intensity can better predict the development trend of soil erosion;(2)Intense erosion occurred mainly in the upper half of the zokor mound,while deposition was mainly limited to its lower half.It is suggested that diminished plateau zokor activity intensity can effectively prevent and control soil erosion;(3)The PSC of eroded sediment is dominated by silt,followed by sand,with clay being the least abundant,and the eroded sediments with a particle size of 10-20μm were sensitive and highly susceptible to rainfall erosion.This finding facilitates the understanding of the formation process of surface geomorphology and the mechanism of soil erosion;(4)The PLSR model indicates that microtopography has an extensive influence on eroded sediments during hydraulic erosion,and the SEM analysis results further confirm that the fractal dimension was the best parameter to represent the PSC of eroded sediments,whereas surface cutting degree was the dominant factor controlling the PSC of eroded sediments.These findings are crucial for predicting soil erosion in the Yellow River source area and provide a new perspective for understanding soil erosion mechanisms in alpine meadow ecosystems.展开更多
Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patte...Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patterns.This complexity poses significant challenges for slope stability analysis,requiring the development of specialized techniques to address these issues.This research presents a numerical methodology that incorporates spatial variability,nonlinear material characterization,and probabilistic analysis using a Monte Carlo framework to address this issue.The heterogeneous structure is represented by randomly assigning different lithotypes across the slope,while maintaining predefined global proportions.This contrasts with the more common approach of applying probabilistic variability to mechanical parameters within a homogeneous slope model.The material behavior is defined using complex nonlinear failure criteria,such as the Hoek-Brown model and a parabolic model with collapse,both implemented through linearization techniques.The Discontinuity Layout Optimization(DLO)method,a novel numerical approach based on limit analysis,is employed to efficiently incorporate these advances and compute the factor of safety of the slope.Within this framework,the Monte Carlo procedure is used to assess slope stability by conducting a large number of simulations,each with a different lithotype distribution.Based on the results,a hybrid method is proposed that combines probabilistic modeling with deterministic design principles for the slope stability assessment.As a case study,the methodology is applied to a 20-m-high vertical slope composed of three lithotypes(altered scoria,welded scoria,and basalt)randomly distributed in proportions of 15%,60%,and 25%,respectively.The results show convergence of mean values after approximately 400 simulations and highlight the significant influence of spatial heterogeneity,with variations of the factor of safety between 5 and 12 in 85%of cases.They also reveal non-circular and mid-slope failure wedges not captured by traditional stability methods.Finally,an equivalent normal probability distribution is proposed as a reliable approximation of the factor of safety for use in risk analysis and engineering decision-making.展开更多
Rock slopes with large intersection angles between the strikes of strata and surface(RS-LISS)represent a unique type of layered rock slope.These slopes are usually considered to be well stabilized and less prone to la...Rock slopes with large intersection angles between the strikes of strata and surface(RS-LISS)represent a unique type of layered rock slope.These slopes are usually considered to be well stabilized and less prone to landslides.However,when such slopes contain a significant number of discontinuities,their stability is greatly weakened.This study provided innovative insights into the stability of RS-LISS and conducted an in-depth investigation of their step-path failure mechanisms.The Riyi landslide on the eastern margin of the Qinghai-Tibet Plateau,China,was taken as a typical case and detailed investigations of geological structure and deformation characteristics of the slope were conducted by means of slope mapping,core drilling,and exploratory adits.A large number of steep-dip and gentle-dip joints were discovered in the slope,along with several critical discontinuities such as faults.Analysis shows that the tectonic stresses and river downcutting over geological time played significant roles in the formation of these discontinuities.Based on the investigation results,a numerical model of DFN for the Riyi landslide was developed.The simulation results indicated that the slope could develop a sliding surface characterized by a steep back and a gentle base,formed through the stepped interconnection of various discontinuities.Additionally,the deformation of the rock mass mainly originated from the major fault,progressively extending downward.The sliding mass may slide suddenly as a whole along the stepped bottom surface,with the compressional fracture zones as lateral boundaries,presenting a"drawer-like"movement towards the free surface.展开更多
Eco-geotechnical engineering plays a pivotal role in enhancing global sustainability and upholding the perfor-mance of earthen structures.The utilization of vegetation to stabilise geotechnical infrastructures is wide...Eco-geotechnical engineering plays a pivotal role in enhancing global sustainability and upholding the perfor-mance of earthen structures.The utilization of vegetation to stabilise geotechnical infrastructures is widely recognized and embraced for its environmentally friendly attributes.The spectre of climate change further in-tensifies the focus on the effects of temperature and humidity on vegetated soil.Consequently,there is a pressing need for research exploring the influence of changing climates on vegetated infrastructures.Such research de-mands a holistic and interdisciplinary approach,bridging fields such as soil mechanics,botany,and atmospheric science.This review underscores key facets crucial to vegetated geotechnical infrastructures,encompassing climate projections,centrifuge modelling,field monitoring,and numerical methodologies.展开更多
The particle size distribution plays a crucial role in the transportation and deposition of eroded sediments.Gaining insights into the related sorting mechanism can significantly enhance our understanding of such proc...The particle size distribution plays a crucial role in the transportation and deposition of eroded sediments.Gaining insights into the related sorting mechanism can significantly enhance our understanding of such processes.In this study,sand-covered slopes were examined.A controlled indoor rainfall simulation was conducted on loess slopes with a 12°incline and a rainfall intensity of 1.5 mm/min.These slopes were then covered with sand layers of varying thicknesses—0.5,1.0,and 1.5 cm—to observe their effects.The findings have revealed that as the thickness of the sand cover increases,the content of sediment particles smaller than 0.054 mm decreases.In contrast,the content of particles larger than 0.054 mm increases after the sixth minute of runoff.The eroded sediment was predominantly composed of silt.During the inter-rill erosion stage,runoff primarily transported particles larger than 0.054 mm.However,in the subsequent rill erosion and combined rill and inter-rill erosion stages,the runoff predominantly carried finer particles,smaller than 0.054 mm.Moreover,the presence of the sand layer significantly influenced the size and form of the eroded sediment particles.Initially,during the first 10 min of runoff,the eroded particles were predominantly larger than 0.054 mm.After this period,however,the particle size shifted,with the majority of particles being smaller than 0.054 mm.This study highlights the intricate relationship between sediment sorting,the thickness of sand covers,and the dynamics of sediment transport under rainfall-induced erosion.展开更多
Landslides triggered by seismic activity have led to substantial human and economic losses.Nevertheless,the fundamental physical mechanisms underlying the vibration and rupture of rock slopes during earthquakes remain...Landslides triggered by seismic activity have led to substantial human and economic losses.Nevertheless,the fundamental physical mechanisms underlying the vibration and rupture of rock slopes during earthquakes remain poorly understood.In this study,finite element method-based numerical simulations were conducted based on the rock slope at Dagangshan Hydropower Station in Sichuan province,China.Firstly,systematic analysis in both the time and frequency domains were performed to examine the seismic dynamic characteristics of the slope.Subsequently,the transfer function method and the multiple stepwise linear regression method were employed to clarify the underlying mechanism and determine critical factors influencing the slope instability during earthquakes.Time-domain analysis reveals that rock slope dynamic response exhibits notable elevation,surface,and local amplification effects.Specifically,the Peak Ground Acceleration(PGA)amplification coefficient(MPGA)is significantly higher at elevated locations,near the slope surface and in areas with protrusions.Moreover,the existence of fracture zones and anti-shear galleries minimally influences the dynamic responses but considerably affect the rupture.Specifically,fracture zones exacerbate rupture,while anti-shear galleries mitigate it.Frequency-domain analysis indicates that the dynamic responses of the slope are closely correlated with the degree of slope rupture.As earthquake magnitude increases,the rupture degree of the slope intensifies,and the dominant frequency of the response within the slope decreases,e.g.,its value shifts from 3.63 to 2.75 Hz at measurement point 9near the slope surface.The transfer function of rock slope,calculated under the excitation of wide flat spectrum white noise can reflect the interrelationships between the inherent properties and the rupture degree.Notably,the peak of the transfer function undergoes inversion as the degree of rupture increases.Furthermore,through multiple stepwise linear regression analysis,four key factors influencing the surface dynamic response of the slope were identified:rock strength,slope angle,elevation,and seismic dominant frequency.These findings provide valuable insights into the underlying mechanisms of rock slope dynamic responses triggered by earthquakes,offering essential guidance for understanding and mitigating seismic impacts on rock slopes.展开更多
Block-flexure toppling constitutes the predominant form of toppling failure in rock slopes.Although it has been extensively studied,the current theoretical models are often oversimplified by treating rock layers as ri...Block-flexure toppling constitutes the predominant form of toppling failure in rock slopes.Although it has been extensively studied,the current theoretical models are often oversimplified by treating rock layers as rigid bodies that diverge from actual conditions.The proposed Equivalent Deformation Compatibility Method(EDCM)offers a fresh approach to assess the stability of rock slopes prone to block-flexure toppling.EDCM posits that blocky rock layers,with their inability to withstand significant bending and role in merely transferring forces,can be modeled as intact layers with a reduced modulus.The method simplifies the complex issue of analyzing discrete and continuous rock layers to the study of layered soft and hard rock,establishing deformation compatibility equations subsequently.Validation of the EDCM was achieved through numerical models,physical model testing,and application to an actual slope.The factor of safety(FS)for slopes corresponds with the results from both models and the actual slope,demonstrating the method's applicability for evaluating susceptibility to block-flexure toppling.When applying the EDCM,it is advised to set the elastic modulus reduction coefficient for blocky layers at a value below 0.1.展开更多
During the construction of bank slopes involving pile driving,ensuring slope stability is crucial.This requires the design of appropriate support systems and a thorough evaluation of the failure mechanisms of pile str...During the construction of bank slopes involving pile driving,ensuring slope stability is crucial.This requires the design of appropriate support systems and a thorough evaluation of the failure mechanisms of pile structures under dynamic loading conditions.Based on the Huarong Coal Wharf project,various support schemes are analyzed using numerical simulation methods to calculate and compare slope stability coefficients.The optimal scheme is then identified.Under the selected support scheme,a numerical model of double-row suspended steel sheet piles is developed to investigate the dynamic response of the pile structures under pile driving loads.A time-history analysis is performed to assess the slope’s dynamic stability.The results show that the maximum displacements of the upper and lower steel sheet pile rows are 2.51 and 3.14 cm,respectively.The maximum principal stresses remain below 20 MPa in both rows,while the maximum von Mises stresses are 20.85 MPa for the upper row and 25.40 MPa for the lower row.The dominant frequencies of the steel sheet pile structures fall between 30 and 35 Hz,with a frequency bandwidth ranging from 0 to 500 Hz.The stability coefficient of the pile structures varies over time during the pile driving process,ultimately reaching a value of 1.26—exceeding the required safety threshold.This research provides practical guidance for designing support systems in wharf piling projects and offers a reliable basis for evaluating the safety performance of steel sheet piles in bank slopes.展开更多
The hydrodynamic response of overland flow to vegetation coverage on convex slopes remains inadequately quantified despite it is critical for soil erosion control in terrains dominated by such topography.This study sy...The hydrodynamic response of overland flow to vegetation coverage on convex slopes remains inadequately quantified despite it is critical for soil erosion control in terrains dominated by such topography.This study systematically investigated the influence of varying vegetation coverage(0%,1.08%,3.24%,4.69%and 9.81%)on the hydrodynamic characteristics of convex slopes through indoor flume experiments under diverse flow discharges(5.5-13.5 m^(3)/h)and slopes(5°-25°).The results revealed three key hydrodynamic mechanisms:(1)Flow retardation and energy dissipation:Increasing vegetation coverage significantly reduced overland flow velocity and promoted higher flow depth,thereby enhancing water retention and energy dissipation.Both stream power(Ω)and unit stream power(ω)declined by 13.9%-30.1%compared to bare slopes.(2)Flow Regime Transition:Froude number(Fr)decreased with increasing vegetation coverage,promoting the transition from supercritical to subcritical flow.The Reynolds number(Re)consistently exceeded 500,indicating the absence of laminar flow.(3)Modification of flow resistance:Vegetation resistance increased nonlinearly with coverage.Maximum bed shear stress was observed at 4.69%coverage(23.5%higher than bare slopes).However,Manning’s(n)and Darcy-Weisbach(f)coefficients did not correlate clearly with Re,indicating that vegetation coverage and slope type feedback significantly change flow resistance mechanisms.展开更多
The hydro-mechanical responses of vegetated deposited slopes are complex and far from clear.On one hand,the soils in deposited slopes are typically poorly consolidated and widely graded,making them vulnerable to inter...The hydro-mechanical responses of vegetated deposited slopes are complex and far from clear.On one hand,the soils in deposited slopes are typically poorly consolidated and widely graded,making them vulnerable to internal erosion during rainfall infiltration.On the other hand,vegetation plays a significant role in influencing the hydro-mechanical properties of the soil at the slope surface.This paper presents a coupled seepage-erosion model to investigate the rainfall-induced internal erosion process within vegetated deposited slopes and its impact on slope stability.The detailed seepage-erosion coupling processes were simulated for a series of 1D rooted soil columns with varying root distributions,as well as 2D vegetated layered slopes under both light and heavy rainfall conditions.The numerical results reveal that roots can significantly mitigate rainfall-induced internal erosion,even with shallow root lengths.However,their protective effect on the slope increases as the root density in the superficial soil layer increases.Transpiration can rapidly restore matric suction in the shallow soil during rain intervals,slowing the rainfall-induced seepage-erosion process and thereby increasing slope stability.However,in the absence of transpiration,roots may either accelerate or inhibit the seepage-erosion process,depending on the specific rainfall conditions.展开更多
During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-be...During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-bedrock slope failure triggered by continuous heavy rainfall are limited,and the role of the soilerock interface between the original bedrock slope and fill slope in the hydrological and failure process of the slope remains unclear.In this study,we conducted a continuous rainfall model test on a loess-bedrock fill slope.During the test,the responses of volume water content,pore pressure,micro deformation,and movement of the infiltration front were observed.The hydrological process and failure mechanism were then analysed.The findings suggest that the soilerock interface is a predominant infiltration surface within the slope.Rainfall infiltration rates at the interface reach 1.24-2.80 times those of the fill slope,with peak interfacial pore water pressure exceeding that of the loess fill.Furthermore,the infiltration front moves rapidly along the interface toward the bottom of the slope,reducing interfacial cohesion between bedrock and loess.The slope failure modes are summarised into three phases:local failure→flow slide and crack penetration→multistage block retrogressive slides.The cracks generated at the slope surface serve as key determinants of the geometry and scale of shallow landslides.Therefore,we recommend targeted engineering interventions to mitigate the instability and erosion of loessebedrock fill slopes.展开更多
Collapses of seismic slopes demonstrate the characteristics of three-dimensional(3D)shapes.Conducting a 3D analysis of seismic slope stability is more complicated than doing a simplified two-dimensional(2D)analysis.Th...Collapses of seismic slopes demonstrate the characteristics of three-dimensional(3D)shapes.Conducting a 3D analysis of seismic slope stability is more complicated than doing a simplified two-dimensional(2D)analysis.The upper-bound solutions derived from limit analysis of seismic slopes using the pseudo-static method are used to generate an approximate solution for the factor of 3D safety through regression analysis.Such a solution can degenerate to a 2D result when the slope width tends to infinity.The approximation method also can be extended for determining the permanent displacements of 3D slopes under seismic loading.The method is non-iterative and relatively accurate through comparisons with analytical results.Involving stochastic ground motions could easily be used to assess the distribution of permanent displacement that is induced in 3D slopes.展开更多
The identification and characterization of concealed in-situ rock blocks on high-steep slope exposures are critical in rock engineering,but remain challenging.This study employs advanced UAV-based photogrammetry to ca...The identification and characterization of concealed in-situ rock blocks on high-steep slope exposures are critical in rock engineering,but remain challenging.This study employs advanced UAV-based photogrammetry to capture high-resolution discontinuity data and develops a fully automated rock block extraction method consisting of three steps:(1)determination of free face and non-free fracture intersections,(2)surface search for rock blocks on free face.and(3)extraction and analysis of rock blocks.This approach simplifies the determination of discontinuity intersections while maintaining high accuracy.By incorporating all types of discontinuities contributing to rock block formation,the method enables precise in-situ rock block identification and extraction.Application to a rock slope in China,produced results consistent with the rock blocks observed in the 3D model,highlighting its accuracy and practical value.展开更多
Earthquakes contribute to the failure of anti-dip bedding rock slopes(ABRSs)in seismically active regions.The pseudo-static method is commonly employed to assess the ABRSs stability.However,simplifying seismic effects...Earthquakes contribute to the failure of anti-dip bedding rock slopes(ABRSs)in seismically active regions.The pseudo-static method is commonly employed to assess the ABRSs stability.However,simplifying seismic effects as static loads often underestimates rock slope stability.The development of a practical stability analysis approach for ABRSs,particularly in slope engineering design,is imperative.This study proposes a stability evaluation model for ABRSs,incorporating the viscoelastic properties of rock,to quantitatively assess the safety factor and failure surface under seismic conditions.The mathematical description of the pseudo-dynamic method,derived in this study,accounts for the viscoelastic properties of ABRSs and integrates the HoekeBrown failure criterion with the Kelvin-Voigt stress-strain relationship of rocks.Furthermore,to address concurrent translation-rotation failure in ABRSs,upper bound limit analysis is utilized to quantify the safety factor.Through a comparison with existing literature,the proposed method considers the effect of harmonic vibration on the stability of ABRSs.The obtained safety factor is lower than that of the quasi-static method,with the resulting percentage change exceeding 5%.The critical failure surface demonstrates superior positional accuracy compared to the Aydan and Adhikary basal planes,with minimal error observed between the physical model test and the numerical simulation test.The parameter sensitivity analysis reveals that the inclination of ABRSs exhibits the highest sensitivity(Sk)value across the three levels of horizontal seismic coefficient(kh).The study aims to devise an expeditious calculation approach for assessing the stability of ABRSs during seismic events,intending to offer theoretical guidance for their stability analysis.展开更多
基金the National Council for Scientific and Technological Development (CNPq) for funding the field studies and for the research productivity fellowship (CNPq/PQ) awarded to Pedro Henrique Augusto MEDEIROS and José Carlos de ARAúJOthe Coordination for the Improvement of Higher Education Personnel (CAPES) for the doctoral scholarship awarded to Teresa Raquel Lima FARIAS (2117/13-4)the Foundation for the Support of Scientific and Technological Development in the State of Ceará (FUNCAP) for the master scholarship awarded to Maria Thereza Rocha CHAVES。
文摘Vegetation plays a major role in soil protection against erosion effects,and studies have also highlighted its importance in retaining sediments from roadside slopes.Yet,hydro-sedimentological studies under natural precipitation conditions are still scarce in semi-arid areas due to difficulties in monitoring the few and very concentrated precipitation events.Quantifying sediment connectivity and yield at watershed scale,often highly impacted by the erosion of unpaved roads,is necessary for management plans.This study aims to evaluate the efficiency of native vegetation on roadside slope segments in Caatinga biome in retaining sediments and conserving the soil in a semi-arid area of Brazil.Surface runoff,sediment concentration,and yield measurements were measured from 34 natural precipitation events in four years on two slopes with and without vegetation.The runoff coefficients of the plot with no vegetation varied from 3.0%to 58.0%,while in the vegetated plot,they showed variation from 1.0%to 21.0%.The annual specific sediment yield ranged from 4.6 to 138.7 kg/(hm^(2)•a)for the vegetated plot and from 34.9 to 608.5 kg/(hm^(2)•a)for the unvegetated one.These results indicate a 4 to 12 times higher soil loss on the unvegetated slope in relation to the vegetated one and demonstrate that natural Caatinga vegetation acts as an effective barrier against surface-transported sediments.Moreover,natural Caatinga vegetation present on the slope plays an important role in breaking connectivity between sediment flows from unpaved roads and the watershed drainage system.These findings indicate that investments in unpaved road and roadside slope restoration,not only enhance road infrastructure but also promote environmental gains by reducing the impact of erosion.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB2600504)the National Natural Science Foundation of China(Grant No.42072302)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20240533).
文摘Reliability analysis of soil slopes under rainfall is an important task for landslide risk assessment.Previous studies rarely contribute to the probabilistic analysis of slope stability under rainfall with reinforcement.A new method is suggested for reliability analysis of soil slopes stabilized with piles under rainfall.First,an efficient numerical model is exploited for slope stability analysis,where two types of slope failure modes,i.e.,plastic flow and local failure are considered.To address the blocking effect of piles during seepage analysis,the equivalent hydraulic conductivity of the pile area is estimated according to the effective medium theory.The stabilizing force of piles is investigated by an analytical approach.For saving computational effort,the response surface is established based on a multi-class classification model to predict two types of slope failure modes.Finally,uncertainties in soil parameters and rainfall events are both modelled,and the failure probability of soil slopes within a given time period is assessed through Monte Carlo simulation.An illustrative example is used to demonstrate the performance of the suggested method.It is found that the slope is mainly controlled by local failure.As the pile spacing increases,the likelihood of plastic flow significantly increases.As the piles are located near the slope crest,plastic flow is effectively prevented and the slope is better stabilized against rainfall.If rainfall uncertainties are not considered,the slope failure probability is significantly overestimated.Overall,this study can provide a useful guidance for the design of pile-stabilized slopes against rainfall infiltration.
文摘The municipality of Hammam N’bails,located 37 km east of the capital of Guelma province(eastern Algeria),is accessible via RN20 and CW19 roads.It borders the municipalities of Khemissa and El Henancha in Souk-Ahras province.With a population of approximately 16,000 and covering an area of 164 km²,this region is characterized by mountainous terrain,with elevations ranging from 112 to 292 meters.The area experiences cold,snowy winters and hot,dry summers,with an average annual rainfall of about 600 mm.Renowned for its natural thermal springs,Hammam N’bails is also a notable tourist destination.The rugged topography of the region leads to frequent landslides,particularly on medium and low slopes.Landslide susceptibility is assessed using raster calculators in ArcGIS and efficient machine learning algorithms,such as Decision Trees,Bagging,Random Forest,SVM,and MLP.Factors considered in the analysis include slope,elevation,geology,aspect,proximity to streams and roads,land cover,and rainfall.The performance of these models is evaluated using ROC-AUC curves,providing a robust method to understand and mitigate geological risks in this area.
基金funding support from the National Nature Science Foundation of China(Grant No.41931296)the Open Research Project of Sichuan Provincial Key Laboratory for Major Hazard Source Monitoring and Control(Grant No.KFKT2023-4)the 57#Project(Grant No.JH2024015).
文摘Weak interlayers play a crucial role in the seismic performance of bedding slopes;however,the effects of structural surface development within these layers remain underexplored.This study presents two scaled models of bedding slopes,each with different weak interlayers:one with a homogeneous weak layer and another with discontinuous interfaces.Shaking table tests were conducted to compare their seismic performance.The results show that the peak ground acceleration(PGA)values above the weak interlayer in model A were significantly higher than those in model B,with the differences increasing as the input wave amplitude increased.The peak earth pressure(PEP)values at the tensile failure boundary at the rear edge of model A were also higher,whereas those within the weak layer at the toe of model A were lower than those in model B.Deformation analysis revealed that the maximum principal strain in model A initially appeared at the upper part of the tensile failure boundary,while the maximum shear strain was concentrated near the rear edge within the weak layer.In contrast,model B exhibited the opposite strain distribution.These findings provide insight into the impact of weak interlayers on the dynamic response and deformation of bedding slopes,highlighting the importance of considering this factor in seismic landslide investigations and failure mode predictions.
基金financially supported by the National Key R&D Program of China(No.2022YFC3080200)。
文摘0 INTRODUCTION Geohazards in mountainous regions pose significant risks to the construction and safe operation of transportation,water conservancy,and other critical infrastructure projects.Engineering geological investigations are crucial for disaster prevention and mitigation.
基金supported by the National Natural Science Foundation of China(Grant No.41961134032).
文摘The stability of reservoir bank slopes during the impoundment period has become a critical issue in the construction and operation of large-scale hydropower projects.A predictive and early warning method for reservoir bank slopes is proposed,based on slip resistance stability evolution analysis.Using a refined three-dimensional numerical calculation model of the bank slope,the creep damage model is employed for simulation and analysis,enabling the derivation of stress field and strain field evolution from bank slope excavation to the long-term impoundment period.Subsequently,for the stress field of the bank slope at any given moment,the safety factors of the sliding blocks are determined by using the multigrid method and vector sum method.Accordingly,the evolutionary law of the sliding safety factor for the bank slope can be derived.By integrating the long-term stability evolution trend of the slope with specific engineering practices,the safety factors for graded warning can be determined.Based on the time correspondence,the graded warning moment and the deformation warning index for slope measurement points can be determined.In this study,the proposed method is applied to the left bank slope of the Jinping I Hydropower Station.The results indicate that from excavation to June 2022,the left bank slope exhibits a strong correlation with excavation elevation and the number of reservoir water cycles.The initial,maximum,and minimum safety factors are 2.01,3.07,and 1.58,respectively.The deep fracture SL44-1 serves as the primary stress-bearing slip surface of the left bank slope,while the safety margin of the fault f42-9 and lamprophyre X is slightly insufficient.Based on the long-term stability evolution trend of the slope and in accordance with relevant standards,the safety factors for graded warning indicators—K_(w1),K_(w2),K_(w3),and K_(w4)—are determined as 1.350,1.325,1.300,and 1.275,respectively.Correspondingly,the estimated warning times are 12/30/2066,12/30/2084,and 12/30/2120.Accordingly,the deformation graded warning indexes for slope measurement points are established.
基金financially supported by the Qinghai University Graduate Student Research and Practice Innovation Project(2025-GPKY-12)Basic Research Project of Qinghai Provincial Science and Technology Department(2021-ZJ-701)+1 种基金National Natural Science Foundation of China(U23A20159,42161068)the 111 Project of China(D18013)。
文摘The mound-making behavior of plateau zokors is one of the most important factors in remodeling meadow microtopography and causing soil erosion in the Yellow River source area of western China,but little is known about the effects of microtopography on particle size characteristics(PSC)of eroded sediments from the bare slopes of zokor mounds during different rainfall events.In this study,we analyzed the relationship of microtopographic features derived from laser point cloud data and PSC of eroded sediments at six simulated rainfall intensities(all lasting 60 min).The effects of microtopography on PSC of eroded sediments were studied via partial least squares regression(PLSR)and structural equation modeling(SEM).The results showed that:(1)15-20 minutes from the beginning of rainfall was the sensitive period of soil loss from the slopes,and the function relationship between the rate of sediment and runoff and rainfall intensity can better predict the development trend of soil erosion;(2)Intense erosion occurred mainly in the upper half of the zokor mound,while deposition was mainly limited to its lower half.It is suggested that diminished plateau zokor activity intensity can effectively prevent and control soil erosion;(3)The PSC of eroded sediment is dominated by silt,followed by sand,with clay being the least abundant,and the eroded sediments with a particle size of 10-20μm were sensitive and highly susceptible to rainfall erosion.This finding facilitates the understanding of the formation process of surface geomorphology and the mechanism of soil erosion;(4)The PLSR model indicates that microtopography has an extensive influence on eroded sediments during hydraulic erosion,and the SEM analysis results further confirm that the fractal dimension was the best parameter to represent the PSC of eroded sediments,whereas surface cutting degree was the dominant factor controlling the PSC of eroded sediments.These findings are crucial for predicting soil erosion in the Yellow River source area and provide a new perspective for understanding soil erosion mechanisms in alpine meadow ecosystems.
基金the project PID2022-139202OB-I00Neural Networks and Optimization Techniques for the Design and Safe Maintenance of Transportation Infrastructures:Volcanic Rock Geotechnics and Slope Stability(IA-Pyroslope),funded by the Spanish State Research Agency of the Ministry of Science,Innovation and Universities of Spain and the European Regional Development Fund,MCIN/AEI/10.13039/501100011033/FEDER,EU。
文摘Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patterns.This complexity poses significant challenges for slope stability analysis,requiring the development of specialized techniques to address these issues.This research presents a numerical methodology that incorporates spatial variability,nonlinear material characterization,and probabilistic analysis using a Monte Carlo framework to address this issue.The heterogeneous structure is represented by randomly assigning different lithotypes across the slope,while maintaining predefined global proportions.This contrasts with the more common approach of applying probabilistic variability to mechanical parameters within a homogeneous slope model.The material behavior is defined using complex nonlinear failure criteria,such as the Hoek-Brown model and a parabolic model with collapse,both implemented through linearization techniques.The Discontinuity Layout Optimization(DLO)method,a novel numerical approach based on limit analysis,is employed to efficiently incorporate these advances and compute the factor of safety of the slope.Within this framework,the Monte Carlo procedure is used to assess slope stability by conducting a large number of simulations,each with a different lithotype distribution.Based on the results,a hybrid method is proposed that combines probabilistic modeling with deterministic design principles for the slope stability assessment.As a case study,the methodology is applied to a 20-m-high vertical slope composed of three lithotypes(altered scoria,welded scoria,and basalt)randomly distributed in proportions of 15%,60%,and 25%,respectively.The results show convergence of mean values after approximately 400 simulations and highlight the significant influence of spatial heterogeneity,with variations of the factor of safety between 5 and 12 in 85%of cases.They also reveal non-circular and mid-slope failure wedges not captured by traditional stability methods.Finally,an equivalent normal probability distribution is proposed as a reliable approximation of the factor of safety for use in risk analysis and engineering decision-making.
基金supported by the National Natural Science Foundation of China(No.U23A2047,No.42277187,No.42307248)Natural Science Foundation of Hebei Province(No.D2022202005)。
文摘Rock slopes with large intersection angles between the strikes of strata and surface(RS-LISS)represent a unique type of layered rock slope.These slopes are usually considered to be well stabilized and less prone to landslides.However,when such slopes contain a significant number of discontinuities,their stability is greatly weakened.This study provided innovative insights into the stability of RS-LISS and conducted an in-depth investigation of their step-path failure mechanisms.The Riyi landslide on the eastern margin of the Qinghai-Tibet Plateau,China,was taken as a typical case and detailed investigations of geological structure and deformation characteristics of the slope were conducted by means of slope mapping,core drilling,and exploratory adits.A large number of steep-dip and gentle-dip joints were discovered in the slope,along with several critical discontinuities such as faults.Analysis shows that the tectonic stresses and river downcutting over geological time played significant roles in the formation of these discontinuities.Based on the investigation results,a numerical model of DFN for the Riyi landslide was developed.The simulation results indicated that the slope could develop a sliding surface characterized by a steep back and a gentle base,formed through the stepped interconnection of various discontinuities.Additionally,the deformation of the rock mass mainly originated from the major fault,progressively extending downward.The sliding mass may slide suddenly as a whole along the stepped bottom surface,with the compressional fracture zones as lateral boundaries,presenting a"drawer-like"movement towards the free surface.
文摘Eco-geotechnical engineering plays a pivotal role in enhancing global sustainability and upholding the perfor-mance of earthen structures.The utilization of vegetation to stabilise geotechnical infrastructures is widely recognized and embraced for its environmentally friendly attributes.The spectre of climate change further in-tensifies the focus on the effects of temperature and humidity on vegetated soil.Consequently,there is a pressing need for research exploring the influence of changing climates on vegetated infrastructures.Such research de-mands a holistic and interdisciplinary approach,bridging fields such as soil mechanics,botany,and atmospheric science.This review underscores key facets crucial to vegetated geotechnical infrastructures,encompassing climate projections,centrifuge modelling,field monitoring,and numerical methodologies.
基金research was funded bymultiple sources,including the Guangxi Natural Science Foundation of Youth Fund(2020GXNSFBA159004)the National Natural Science Foundation Project of China(51779204)the Guilin University of Technology High-Level Talent Research Startup Project(GUTQDJJ2018069).
文摘The particle size distribution plays a crucial role in the transportation and deposition of eroded sediments.Gaining insights into the related sorting mechanism can significantly enhance our understanding of such processes.In this study,sand-covered slopes were examined.A controlled indoor rainfall simulation was conducted on loess slopes with a 12°incline and a rainfall intensity of 1.5 mm/min.These slopes were then covered with sand layers of varying thicknesses—0.5,1.0,and 1.5 cm—to observe their effects.The findings have revealed that as the thickness of the sand cover increases,the content of sediment particles smaller than 0.054 mm decreases.In contrast,the content of particles larger than 0.054 mm increases after the sixth minute of runoff.The eroded sediment was predominantly composed of silt.During the inter-rill erosion stage,runoff primarily transported particles larger than 0.054 mm.However,in the subsequent rill erosion and combined rill and inter-rill erosion stages,the runoff predominantly carried finer particles,smaller than 0.054 mm.Moreover,the presence of the sand layer significantly influenced the size and form of the eroded sediment particles.Initially,during the first 10 min of runoff,the eroded particles were predominantly larger than 0.054 mm.After this period,however,the particle size shifted,with the majority of particles being smaller than 0.054 mm.This study highlights the intricate relationship between sediment sorting,the thickness of sand covers,and the dynamics of sediment transport under rainfall-induced erosion.
基金supported by the National Natural Science Foundation of China(Grant Nos.52274075,42122052,52379098)。
文摘Landslides triggered by seismic activity have led to substantial human and economic losses.Nevertheless,the fundamental physical mechanisms underlying the vibration and rupture of rock slopes during earthquakes remain poorly understood.In this study,finite element method-based numerical simulations were conducted based on the rock slope at Dagangshan Hydropower Station in Sichuan province,China.Firstly,systematic analysis in both the time and frequency domains were performed to examine the seismic dynamic characteristics of the slope.Subsequently,the transfer function method and the multiple stepwise linear regression method were employed to clarify the underlying mechanism and determine critical factors influencing the slope instability during earthquakes.Time-domain analysis reveals that rock slope dynamic response exhibits notable elevation,surface,and local amplification effects.Specifically,the Peak Ground Acceleration(PGA)amplification coefficient(MPGA)is significantly higher at elevated locations,near the slope surface and in areas with protrusions.Moreover,the existence of fracture zones and anti-shear galleries minimally influences the dynamic responses but considerably affect the rupture.Specifically,fracture zones exacerbate rupture,while anti-shear galleries mitigate it.Frequency-domain analysis indicates that the dynamic responses of the slope are closely correlated with the degree of slope rupture.As earthquake magnitude increases,the rupture degree of the slope intensifies,and the dominant frequency of the response within the slope decreases,e.g.,its value shifts from 3.63 to 2.75 Hz at measurement point 9near the slope surface.The transfer function of rock slope,calculated under the excitation of wide flat spectrum white noise can reflect the interrelationships between the inherent properties and the rupture degree.Notably,the peak of the transfer function undergoes inversion as the degree of rupture increases.Furthermore,through multiple stepwise linear regression analysis,four key factors influencing the surface dynamic response of the slope were identified:rock strength,slope angle,elevation,and seismic dominant frequency.These findings provide valuable insights into the underlying mechanisms of rock slope dynamic responses triggered by earthquakes,offering essential guidance for understanding and mitigating seismic impacts on rock slopes.
基金financially supported by Youth Innovation Promotion Association,CAS(Grant No.2022333)Knowledge Innovation Program of Wuhan e Basic Research(Grant No.2022010801010161)Natural Science Foundation of Hubei Province,China(Grant No.2023AFD219).
文摘Block-flexure toppling constitutes the predominant form of toppling failure in rock slopes.Although it has been extensively studied,the current theoretical models are often oversimplified by treating rock layers as rigid bodies that diverge from actual conditions.The proposed Equivalent Deformation Compatibility Method(EDCM)offers a fresh approach to assess the stability of rock slopes prone to block-flexure toppling.EDCM posits that blocky rock layers,with their inability to withstand significant bending and role in merely transferring forces,can be modeled as intact layers with a reduced modulus.The method simplifies the complex issue of analyzing discrete and continuous rock layers to the study of layered soft and hard rock,establishing deformation compatibility equations subsequently.Validation of the EDCM was achieved through numerical models,physical model testing,and application to an actual slope.The factor of safety(FS)for slopes corresponds with the results from both models and the actual slope,demonstrating the method's applicability for evaluating susceptibility to block-flexure toppling.When applying the EDCM,it is advised to set the elastic modulus reduction coefficient for blocky layers at a value below 0.1.
基金sponsored by Natural Science Research Project of Anhui Educational Committee(GrantNo.2022AH050810),NationalNatural Science Foundation of China(GrantNos.42402276,41972286,42072309,42102329)State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,Jianghan University(No.PBSKL2023A1)the Open Fund of National Center for International Research on Deep Earth Drilling and Resource Development(No.DEDRD-2023-02).
文摘During the construction of bank slopes involving pile driving,ensuring slope stability is crucial.This requires the design of appropriate support systems and a thorough evaluation of the failure mechanisms of pile structures under dynamic loading conditions.Based on the Huarong Coal Wharf project,various support schemes are analyzed using numerical simulation methods to calculate and compare slope stability coefficients.The optimal scheme is then identified.Under the selected support scheme,a numerical model of double-row suspended steel sheet piles is developed to investigate the dynamic response of the pile structures under pile driving loads.A time-history analysis is performed to assess the slope’s dynamic stability.The results show that the maximum displacements of the upper and lower steel sheet pile rows are 2.51 and 3.14 cm,respectively.The maximum principal stresses remain below 20 MPa in both rows,while the maximum von Mises stresses are 20.85 MPa for the upper row and 25.40 MPa for the lower row.The dominant frequencies of the steel sheet pile structures fall between 30 and 35 Hz,with a frequency bandwidth ranging from 0 to 500 Hz.The stability coefficient of the pile structures varies over time during the pile driving process,ultimately reaching a value of 1.26—exceeding the required safety threshold.This research provides practical guidance for designing support systems in wharf piling projects and offers a reliable basis for evaluating the safety performance of steel sheet piles in bank slopes.
基金financially supported by the National Natural Science Foundation of China(Grant NO.52279056)Inner Mongolia open list project(Grant NO.2024JBGS0023)。
文摘The hydrodynamic response of overland flow to vegetation coverage on convex slopes remains inadequately quantified despite it is critical for soil erosion control in terrains dominated by such topography.This study systematically investigated the influence of varying vegetation coverage(0%,1.08%,3.24%,4.69%and 9.81%)on the hydrodynamic characteristics of convex slopes through indoor flume experiments under diverse flow discharges(5.5-13.5 m^(3)/h)and slopes(5°-25°).The results revealed three key hydrodynamic mechanisms:(1)Flow retardation and energy dissipation:Increasing vegetation coverage significantly reduced overland flow velocity and promoted higher flow depth,thereby enhancing water retention and energy dissipation.Both stream power(Ω)and unit stream power(ω)declined by 13.9%-30.1%compared to bare slopes.(2)Flow Regime Transition:Froude number(Fr)decreased with increasing vegetation coverage,promoting the transition from supercritical to subcritical flow.The Reynolds number(Re)consistently exceeded 500,indicating the absence of laminar flow.(3)Modification of flow resistance:Vegetation resistance increased nonlinearly with coverage.Maximum bed shear stress was observed at 4.69%coverage(23.5%higher than bare slopes).However,Manning’s(n)and Darcy-Weisbach(f)coefficients did not correlate clearly with Re,indicating that vegetation coverage and slope type feedback significantly change flow resistance mechanisms.
基金supported by National Natural Science Foundation of China(Grant No.42372330)Science and Technology Research Program of Institute of Mountain Hazards and Environment,Chinese Academy of Sciences(Grant No.IMHE-CXTD-01-IMHE-ZYTS-12)Sichuan Science and Technology Program(Grant No.2024NSFSC0102).
文摘The hydro-mechanical responses of vegetated deposited slopes are complex and far from clear.On one hand,the soils in deposited slopes are typically poorly consolidated and widely graded,making them vulnerable to internal erosion during rainfall infiltration.On the other hand,vegetation plays a significant role in influencing the hydro-mechanical properties of the soil at the slope surface.This paper presents a coupled seepage-erosion model to investigate the rainfall-induced internal erosion process within vegetated deposited slopes and its impact on slope stability.The detailed seepage-erosion coupling processes were simulated for a series of 1D rooted soil columns with varying root distributions,as well as 2D vegetated layered slopes under both light and heavy rainfall conditions.The numerical results reveal that roots can significantly mitigate rainfall-induced internal erosion,even with shallow root lengths.However,their protective effect on the slope increases as the root density in the superficial soil layer increases.Transpiration can rapidly restore matric suction in the shallow soil during rain intervals,slowing the rainfall-induced seepage-erosion process and thereby increasing slope stability.However,in the absence of transpiration,roots may either accelerate or inhibit the seepage-erosion process,depending on the specific rainfall conditions.
基金supported by the National Key R&D Program of China(Grant No.2023YFC3008404)the National Key Research and Development Program,China(Grant No.2017YFD0800501)the National Natural Science Foundation of China(No.41790443).
文摘During extensive gully land consolidation projects on China's Loess Plateau,many loess-bedrock fill slopes were formed,which frequently experience shallow landslides induced by rainfall.However,studies on loess-bedrock slope failure triggered by continuous heavy rainfall are limited,and the role of the soilerock interface between the original bedrock slope and fill slope in the hydrological and failure process of the slope remains unclear.In this study,we conducted a continuous rainfall model test on a loess-bedrock fill slope.During the test,the responses of volume water content,pore pressure,micro deformation,and movement of the infiltration front were observed.The hydrological process and failure mechanism were then analysed.The findings suggest that the soilerock interface is a predominant infiltration surface within the slope.Rainfall infiltration rates at the interface reach 1.24-2.80 times those of the fill slope,with peak interfacial pore water pressure exceeding that of the loess fill.Furthermore,the infiltration front moves rapidly along the interface toward the bottom of the slope,reducing interfacial cohesion between bedrock and loess.The slope failure modes are summarised into three phases:local failure→flow slide and crack penetration→multistage block retrogressive slides.The cracks generated at the slope surface serve as key determinants of the geometry and scale of shallow landslides.Therefore,we recommend targeted engineering interventions to mitigate the instability and erosion of loessebedrock fill slopes.
基金National Natural Science Foundation of China under Grant No.52322808the Fundamental Research Funds for the Central Universities under Grant No.B220202013。
文摘Collapses of seismic slopes demonstrate the characteristics of three-dimensional(3D)shapes.Conducting a 3D analysis of seismic slope stability is more complicated than doing a simplified two-dimensional(2D)analysis.The upper-bound solutions derived from limit analysis of seismic slopes using the pseudo-static method are used to generate an approximate solution for the factor of 3D safety through regression analysis.Such a solution can degenerate to a 2D result when the slope width tends to infinity.The approximation method also can be extended for determining the permanent displacements of 3D slopes under seismic loading.The method is non-iterative and relatively accurate through comparisons with analytical results.Involving stochastic ground motions could easily be used to assess the distribution of permanent displacement that is induced in 3D slopes.
基金supported by the National Key R&D Program of China(Grant No.2022YFC3080200)。
文摘The identification and characterization of concealed in-situ rock blocks on high-steep slope exposures are critical in rock engineering,but remain challenging.This study employs advanced UAV-based photogrammetry to capture high-resolution discontinuity data and develops a fully automated rock block extraction method consisting of three steps:(1)determination of free face and non-free fracture intersections,(2)surface search for rock blocks on free face.and(3)extraction and analysis of rock blocks.This approach simplifies the determination of discontinuity intersections while maintaining high accuracy.By incorporating all types of discontinuities contributing to rock block formation,the method enables precise in-situ rock block identification and extraction.Application to a rock slope in China,produced results consistent with the rock blocks observed in the 3D model,highlighting its accuracy and practical value.
基金funding support from the National Natural Science Foundation of China(Grant No.42072303)the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project(Grant No.SKLGP2021Z004).
文摘Earthquakes contribute to the failure of anti-dip bedding rock slopes(ABRSs)in seismically active regions.The pseudo-static method is commonly employed to assess the ABRSs stability.However,simplifying seismic effects as static loads often underestimates rock slope stability.The development of a practical stability analysis approach for ABRSs,particularly in slope engineering design,is imperative.This study proposes a stability evaluation model for ABRSs,incorporating the viscoelastic properties of rock,to quantitatively assess the safety factor and failure surface under seismic conditions.The mathematical description of the pseudo-dynamic method,derived in this study,accounts for the viscoelastic properties of ABRSs and integrates the HoekeBrown failure criterion with the Kelvin-Voigt stress-strain relationship of rocks.Furthermore,to address concurrent translation-rotation failure in ABRSs,upper bound limit analysis is utilized to quantify the safety factor.Through a comparison with existing literature,the proposed method considers the effect of harmonic vibration on the stability of ABRSs.The obtained safety factor is lower than that of the quasi-static method,with the resulting percentage change exceeding 5%.The critical failure surface demonstrates superior positional accuracy compared to the Aydan and Adhikary basal planes,with minimal error observed between the physical model test and the numerical simulation test.The parameter sensitivity analysis reveals that the inclination of ABRSs exhibits the highest sensitivity(Sk)value across the three levels of horizontal seismic coefficient(kh).The study aims to devise an expeditious calculation approach for assessing the stability of ABRSs during seismic events,intending to offer theoretical guidance for their stability analysis.
