The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smoot...The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smooth transformation between small-scale laboratory specimens’fatigue properties and full-scale engineering components’fatigue strength has been a long-term challenge.In this work,two dominant factors impeding the smooth transformation—notch and size effect were experimentally studied,in which fatigue tests on Al 7075-T6511(a very high-strength aviation alloy)notched specimens of different scales were carried out.Fractography analyses identified the evidence of the size effect on notch fatigue damage evolution.Accordingly,the Energy Field Intensity(EFI)initially developed for multiaxial notch fatigue analysis was improved by utilizing the volume ratio of the Effective Damage Zones(EDZs)for size effect correction.In particular,it was extended to a probabilistic model considering the inherent variability of the fatigue phenomenon.The experimental data of Al 7075-T6511 notched specimens and the model-predicted results were compared,indicating the high potential of the proposed approach in fatigue evaluation under combined notch and size effects.展开更多
In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ra...In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ratios(λ)were prepared using pulsed electrodeposition in this paper and unidirectional tensile experiments were carried out at room temperature with different currents and their applied directions.The experimental results show that the nanocrystalline Ni foil produces an obvious electroplasticity effect after applying the current field,and when 300<λ<1100,the current weakens the size effect of nanocrystalline Ni foils to a certain extent,and the angle between the current direction and the deformation direction also affects the mechanical response of nanocrystalline Ni foils,and when the angle between the current direction and the deformation direction is 0°,electroplasticity effect is the best,and the current has the most significant effect of abating the size effect of the material.The mechanism of unidirectional tensile deformation of nanocrystalline Ni foils under the effect of pulsed current was analyzed using TEM and TKD.It was found that the applied pulse current increased the activity of the nanocrystalline boundaries,promoted the movement of dislocations,and reduced the tendency of dislocation entanglement.The higher the peak current density and the smaller the angle between the direction of the current and the direction of deformation,the smaller the grain boundary orientation difference,the more dispersed the grain orientation,and the lower the density of geometrically necessary dislocations(GND)in the deformed nanocrystalline foil,the more significant the effect on material plasticity improvement.展开更多
Compared to traditional perovskite ferroelectric materials,HfO_(2) has emerged as a prominent research focus due to its ability to retain significant ferroelectricity at the nanoscale.However,systematic studies on its...Compared to traditional perovskite ferroelectric materials,HfO_(2) has emerged as a prominent research focus due to its ability to retain significant ferroelectricity at the nanoscale.However,systematic studies on its performance in thicker films remain limited,leaving the intrinsic relationship between thickness variation and ferroelectric properties poorly understood.In this work,we successfully fabricated doped HfO_(2)-based ferroelectric thin films with thicknesses spanning tens to hundreds of nanometers.All these films exhibit robust ferroelectric characteristics,and their ferroelectric properties demonstrate a non-monotonic evolution with increasing thickness.Macroscopic electrical measurements and mesoscale domain switching analysis confirmed that the ferroelectric properties of Ce:HfO_(2) films first diminish and then recover with the increase of film thickness.By further characterizing the evolution of microscopic structures,we elucidate the thickness effects on the grain size distribution and domain structure evolution.This framework clarifies the physical mechanism underlying the thickness-dependent ferroelectric behavior.Our findings provide critical experimental evidence for developing large-scale HfO_(2)-based ferroelectric devices and lay a theoretical foundation for optimizing thick-film ferroelectric materials for practical applications.展开更多
To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept...To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept of twin lamella strengthening zone was used in terms of the cohesive interface model to simulate grain-boundary sliding and separation. The model included a number of material parameters, such as grain size, elastic modulus, plastic strain hardening exponent, initial yield stress, as well as twin lamellar distribution, which may contribute to size effects of twin layers in Cu polycrystalline. The results provide information to understand the mechanical behaviors of Cu with nano-scale growth twins.展开更多
The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like ...The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.展开更多
Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing sc...Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved.展开更多
To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment a...To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment at different temperatures; and then tensile tests of samples with different thicknesses and grain sizes were conducted at room temperature. The results show that yield strength increases with decreasing thickness from 800 to 50 μm, but work hardening exponent and total elongation decrease, and a modified model was proposed to describe the relation between yield strength and thickness; yield strength decreases as the grain size increases, but work hardening exponent shows an increasing trend, total elongation increases to a peak and then decreases. Fracture morphology of tensile specimens was observed by SEM, which indicates that all tensile specimens are ductile fracture. The dimple intensity increases as the specimen thickness increases but reduces with the specimen grain size increasing.展开更多
Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisf...Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisfying high strength to weigh ratio requirements of product manufacturing. However, due to nonlinear nature of bending with coupling effects of multiple factors, the similarity theory seems not applicable and there occurs a challenge for efficient and reliable evaluation of the bending formability of thin-walled tube with various bending specifications. Considering the unequal deformation and three major instabilities, the bending formability of thin-walled Al-alloy tube in changing tube sizes such as D and t are clarified via both the analytical and FE modeling/ simulations. The experiments of rotary draw bending are conducted to validate the theoretical models and further confirm ＇size effect＇ related bending formability. The major results show that （1） The anti-wrinkling capability of tube decreases with the larger D and smaller t, and the effect significance of t is larger than that of D even under rigid supports; （2） The wall thinning increases with the larger D and smaller t, and this tendency becomes much more obvious under rigid supports; （3） The cross-section deformation increases with the larger D and smaller t according to the analytical model obtained intrinsic relationship, while this tendency becomes opposite due to the nonlinear role of mandrel die; （4） The size factor D/t can be used as a nondimensional index to evaluate both the bending formability regarding the wall thinning and cross-section deformation.展开更多
Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the nu...Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.展开更多
The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly u...The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly using the conventional elastic-plastic theory. It is because that no length scale parameters are involved in the conventional theory. In the present research, using the strain gradient plasticity theory, a systematic research of the particle size effect in the particulate metal matrix composite is carried out. The roles of many composite factors, such as: the particle size, the Young's modulus of the particle, the particle aspect ratio and volume fraction, as well as the plastic strain hardening exponent of the matrix material, are studied in detail. In order to obtain a general understanding for the composite behavior, two kinds of particle shapes, ellipsoid and cylinder, are considered to check the strength dependence of the smooth or non-smooth particle surface. Finally, the prediction results will be applied to the several experiments about the ceramic particle-reinforced metal-matrix composites. The material length scale parameter is predicted.展开更多
Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture t...Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture toughness, effective fracture energy and fracture process zone(FPZ) size of geomaterials were first analyzed by systematic size effect fracture experiments. The results showed that the nominal strength and the apparent fracture toughness decreased with increasing bedding plane inclination angle.The larger the specimen size was, the smaller the nominal strength and the larger the apparent fracture toughness was. When the bedding inclination angle increased from 0° to 90°, the effective fracture energy and the effective FPZ size both first decreased and then increased within two complex variation stages that were bounded by the 45° bedding angle. Regardless of the inherent anisotropy of geomaterials,the nominal strength and apparent fracture toughness can be predicted by the energy-based size effect law, which demonstrates that geomaterials have obvious quasi-brittle characteristics. Theoretical analysis indicated that the true fracture toughness and energy dissipation can be calculated by linear elastic fracture mechanics only when the brittleness number is higher than 10;otherwise, size effect tests should be adopted to determine the fracture parameters.展开更多
Estimation of horizontal stress magnitudes from borehole breakouts has been an attractive topic in the petroleum and mining industries,although there are critical research gaps that remain unfilled.In this paper,numer...Estimation of horizontal stress magnitudes from borehole breakouts has been an attractive topic in the petroleum and mining industries,although there are critical research gaps that remain unfilled.In this paper,numerical simulation is conducted on Gosford sandstone to investigate the borehole breakout and its associated borehole size effect,including temperature influence.The discrete element method(DEM)model shows that the borehole breakout angular span is constant after the initial formation,whereas its depth propagates along the minimum horizontal stress direction.This indicates that the breakout angular span is a reliable parameter for horizontal stress estimation.The borehole size effect simulations illustrated the importance of borehole size on breakout geometries in which smaller borehole size leads to higher breakout initiation stress as well as the stress re-distribution from borehole wall outwards through micro-cracking.This implies that the stress may be averaged over a distance around the borehole and breakout initiation occurs at the borehole wall rather than some distance into the rock.In addition,the numerical simulation incorporated the thermal effect which is widely encountered in deep geothermal wells.Based on the results,the higher temperature led to lower breakout initiation stress with same borehole size,and more proportion of shear cracks was generated under higher temperature.This indicates that the temperature might contribute to the micro-fracturing mode and hence influences the horizontal stress estimation results from borehole breakout geometries.Numerical simulation showed that breakout shape and dimensions changed considerably under high stress and high temperature conditions,suggesting that the temperature may need to be considered for breakout stress analysis in deep locations.展开更多
In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experimen...In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experiments.They indicate that RPC without fiber behaves quite the same as normal or high strength concrete.The size effect on compressive strength is more prominent in RPC containing fiber.Bazant's size effect formula of compressive strength applies to RPC.A formula is given to predict the compressive strength of cubic RPC specimens 100 mm on a side where the fiber dosage ranges from 0-2%.展开更多
This paper uses the discrete element method to model the size and cushion effects during single-particle crushing tests.We propose simplified numerical modeling to examine the effects of particle size and coordination...This paper uses the discrete element method to model the size and cushion effects during single-particle crushing tests.We propose simplified numerical modeling to examine the effects of particle size and coordination number on particle breakage behavior.We validate the proposed modeling by comparing the numerical results with the experimental data reported in the literature,in terms of the variability of particle tensile strength and axial force-displacement responses.Based on the numerical results,it is clear that a larger particle size entails a higher tensile strength with a larger discreteness.In addition,the characteristic tensile strength increases linearly with an increasing coordination number.Moreover,smaller particles are more susceptible to the cushion effect than larger particles.The numerical results also indicate that an increasing coordination number induces a more ductile mode of failure.Based on these results,we propose an empirical equation for calculating tensile strength,incorporating both the cushion effect and the size effect.展开更多
Six kinds of micro bridge-beam specimens with different sizes are fabricated using photolithography technology for bending test. Beam specimens with trapezoidal section could be representatives of those with rectangle...Six kinds of micro bridge-beam specimens with different sizes are fabricated using photolithography technology for bending test. Beam specimens with trapezoidal section could be representatives of those with rectangle and square section, which are usually applied in MEMS. Nano indentation method used in bending test can be applied to both elastic and plastic materials. Also, some mechanical properties parameters such as the modulus of elasticity, hardness and the bending strength are obtained. The average modulus of elasticity of SCS is 170.295 0±2.485 0 GPa, showing no size effects, but the bending strength ranges from 3.24 GPa to 10.15 GPa, displaying strong size effects, and the average hardness is 9.496 7±1.753 3 GPa,in which no obvious size effects are observed.展开更多
Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle siz...Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle size on catalytic behaviors were investigated at both shorter and longer contact times. At shorter contact time, where the secondary reactions were insignificant, the turnover frequency （TOF） for CO conversion was dependent on the mean size of Ru particles; TOF increased with the mean size of Ru particles from 2.3 to 6.3 nm and then decreased slightly. At the same time, the selectivities to C5＋ hydrocarbons increased gradually with the mean size of Ru particles up to 6.3 nm and then kept almost unchanged with a further increase in Ru particle size. At longer contact time, C10-C20 selectivity increased significantly at the expense of C21＋ selectivity, suggesting the occurrence of the selective hydrocracking of C21＋ to C10-C20 hydrocarbons.展开更多
In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 m...In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes.The results show that,the decline ratio of elastic modulus is weakened with increasing grain size,and the Bauschinger effect becomes evident with decreasing grain size.Meanwhile,U-bending test results determine that the springback is diminished with increasing grain size.The Chaboche,Anisotropic Nonlinear Kinematic(ANK)and Yoshida-Uemori(Y-U)models were utilized to fit the shear stress-strain curves of specimens.It is found that Y-U model is sufficient of predicting the springback.However,the prediction accuracy is degraded with increasing grain size.展开更多
A significant size effect is found in the Al3 Sc dispersoid-mediated precipitation in an Al-Mg-Si-Sc alloy.When the Al3 Sc dispersoid size smaller than about 40 nm,β " precipitates nucleate directly on the coher...A significant size effect is found in the Al3 Sc dispersoid-mediated precipitation in an Al-Mg-Si-Sc alloy.When the Al3 Sc dispersoid size smaller than about 40 nm,β " precipitates nucleate directly on the coherent dispersoids and grow by sacrificing the latter.While the dispersoid size greater than^40 nm,Q' and U2 phases are additionally produced that nucleate on the dislocations induced by the semi-/incoherent dispersoids.Mechanical and electrical properties are highly sensitive to the Al3 Sc dispersoid-tuned precipitation.The co-precipitation of β",Q' and U2 phases leads to an obvious improvement in hardness and simultaneously in electrical conductivity.展开更多
In order to investigate the effect of sample size on the dynamic torsional behaviour of the 2A12 aluminium alloy. In this paper, torsional split Hopkinson bar tests are conducted on this alloy with different sample di...In order to investigate the effect of sample size on the dynamic torsional behaviour of the 2A12 aluminium alloy. In this paper, torsional split Hopkinson bar tests are conducted on this alloy with different sample dimensions. It is found that with the decreasing gauge length and thickness, the tested yield strength increases. However, the sample innerlouter diameter has little effect on the dynamic torsional behaviour. Based on the finite element method, the stress states in the alloy with different sample sizes are analysed. Due to the effect of stress concentration zone （SCZ）, the shorter sample has a higher yield stress. Furthermore, the stress distributes more uniformly in the thinner sample, which leads to the higher tested yield stress. According to the experimental and simulation analysis, some suggestions on choosing the sample size are given as well.展开更多
In the present research, hierarchical structure observation and mechanical property characterization for a type of biomaterial are carried out. The investigated bioma- terial is Hyriopsis cumingii, a typical limnetic ...In the present research, hierarchical structure observation and mechanical property characterization for a type of biomaterial are carried out. The investigated bioma- terial is Hyriopsis cumingii, a typical limnetic shell, which consists of two different structural layers, a prismatic ＂pillar＂ structure and a nacreous ＂brick and mortar＂ structure. The prismatic layer looks like a ＂pillar forest＂ with variationsection pillars sized on the order of several tens of microns. The nacreous material looks like a ＂brick wall＂ with bricks sized on the order of several microns. Both pillars and bricks are composed of nanoparticles. The mechanical properties of the hierarchical biomaterial are measured by using the nanoindentation test. Hardness and modulus are measured for both the nacre layer and the prismatic layer, respectively. The nanoindentation size effects for the hierarchical structural materials are investigated experimentally. The results show that the prismatic nanostructured material has a higher stiffness and hardness than the nacre nanostructured material. In addition, the nanoindentation size effects for the hierarchical structural materials are described theoretically, by using the trans-scale mechanics theory considering both strain gradient effect and the surface/interface effect. The modeling results are consistent with experimental ones.展开更多
基金support from the Key Program of the National Natural Science Foundation of China(No.12232004)the Training Program of the Sichuan Province Science and the Technology Innovation Seedling Project(No.MZGC20230012)are acknowledged.
文摘The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smooth transformation between small-scale laboratory specimens’fatigue properties and full-scale engineering components’fatigue strength has been a long-term challenge.In this work,two dominant factors impeding the smooth transformation—notch and size effect were experimentally studied,in which fatigue tests on Al 7075-T6511(a very high-strength aviation alloy)notched specimens of different scales were carried out.Fractography analyses identified the evidence of the size effect on notch fatigue damage evolution.Accordingly,the Energy Field Intensity(EFI)initially developed for multiaxial notch fatigue analysis was improved by utilizing the volume ratio of the Effective Damage Zones(EDZs)for size effect correction.In particular,it was extended to a probabilistic model considering the inherent variability of the fatigue phenomenon.The experimental data of Al 7075-T6511 notched specimens and the model-predicted results were compared,indicating the high potential of the proposed approach in fatigue evaluation under combined notch and size effects.
基金Project(51975167)supported by the National Natural Science Foundation of China。
文摘In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ratios(λ)were prepared using pulsed electrodeposition in this paper and unidirectional tensile experiments were carried out at room temperature with different currents and their applied directions.The experimental results show that the nanocrystalline Ni foil produces an obvious electroplasticity effect after applying the current field,and when 300<λ<1100,the current weakens the size effect of nanocrystalline Ni foils to a certain extent,and the angle between the current direction and the deformation direction also affects the mechanical response of nanocrystalline Ni foils,and when the angle between the current direction and the deformation direction is 0°,electroplasticity effect is the best,and the current has the most significant effect of abating the size effect of the material.The mechanism of unidirectional tensile deformation of nanocrystalline Ni foils under the effect of pulsed current was analyzed using TEM and TKD.It was found that the applied pulse current increased the activity of the nanocrystalline boundaries,promoted the movement of dislocations,and reduced the tendency of dislocation entanglement.The higher the peak current density and the smaller the angle between the direction of the current and the direction of deformation,the smaller the grain boundary orientation difference,the more dispersed the grain orientation,and the lower the density of geometrically necessary dislocations(GND)in the deformed nanocrystalline foil,the more significant the effect on material plasticity improvement.
基金supported by the National Natural Science Foundation of China(Nos.12372331,12072307,and 12302429)the Science and Technology Innovation Program of Hunan Province,China(No.2024RC3160)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110116).
文摘Compared to traditional perovskite ferroelectric materials,HfO_(2) has emerged as a prominent research focus due to its ability to retain significant ferroelectricity at the nanoscale.However,systematic studies on its performance in thicker films remain limited,leaving the intrinsic relationship between thickness variation and ferroelectric properties poorly understood.In this work,we successfully fabricated doped HfO_(2)-based ferroelectric thin films with thicknesses spanning tens to hundreds of nanometers.All these films exhibit robust ferroelectric characteristics,and their ferroelectric properties demonstrate a non-monotonic evolution with increasing thickness.Macroscopic electrical measurements and mesoscale domain switching analysis confirmed that the ferroelectric properties of Ce:HfO_(2) films first diminish and then recover with the increase of film thickness.By further characterizing the evolution of microscopic structures,we elucidate the thickness effects on the grain size distribution and domain structure evolution.This framework clarifies the physical mechanism underlying the thickness-dependent ferroelectric behavior.Our findings provide critical experimental evidence for developing large-scale HfO_(2)-based ferroelectric devices and lay a theoretical foundation for optimizing thick-film ferroelectric materials for practical applications.
文摘To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept of twin lamella strengthening zone was used in terms of the cohesive interface model to simulate grain-boundary sliding and separation. The model included a number of material parameters, such as grain size, elastic modulus, plastic strain hardening exponent, initial yield stress, as well as twin lamellar distribution, which may contribute to size effects of twin layers in Cu polycrystalline. The results provide information to understand the mechanical behaviors of Cu with nano-scale growth twins.
基金This work was supported by the National Natural Science Foundation of China （No.20776089） and the New Century Excellent Talents Program of Ministry of Education （No.NCET-05-0783）. The State Key Laboratory of Polymer Materials Engineering in Sichuan University was acknowledged for providing dmol3 modules and Prof. Ying Xue, Xiang-yuan Li, and Quan Zhu were grateful for the useful discussions.
文摘The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.
基金Project(51375113)supported by the National Natural Science Foundation of China
文摘Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved.
文摘To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment at different temperatures; and then tensile tests of samples with different thicknesses and grain sizes were conducted at room temperature. The results show that yield strength increases with decreasing thickness from 800 to 50 μm, but work hardening exponent and total elongation decrease, and a modified model was proposed to describe the relation between yield strength and thickness; yield strength decreases as the grain size increases, but work hardening exponent shows an increasing trend, total elongation increases to a peak and then decreases. Fracture morphology of tensile specimens was observed by SEM, which indicates that all tensile specimens are ductile fracture. The dimple intensity increases as the specimen thickness increases but reduces with the specimen grain size increasing.
基金the National Natural Science Foundation of China (No. 50905144)the Program for New Century Excellent Talents in University, the Natural Science Basic Research Plan in Shaanxi Province (No. 2011JQ6004)the 111 Project (No. B08040) for the support given to this research
文摘Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisfying high strength to weigh ratio requirements of product manufacturing. However, due to nonlinear nature of bending with coupling effects of multiple factors, the similarity theory seems not applicable and there occurs a challenge for efficient and reliable evaluation of the bending formability of thin-walled tube with various bending specifications. Considering the unequal deformation and three major instabilities, the bending formability of thin-walled Al-alloy tube in changing tube sizes such as D and t are clarified via both the analytical and FE modeling/ simulations. The experiments of rotary draw bending are conducted to validate the theoretical models and further confirm ＇size effect＇ related bending formability. The major results show that （1） The anti-wrinkling capability of tube decreases with the larger D and smaller t, and the effect significance of t is larger than that of D even under rigid supports; （2） The wall thinning increases with the larger D and smaller t, and this tendency becomes much more obvious under rigid supports; （3） The cross-section deformation increases with the larger D and smaller t according to the analytical model obtained intrinsic relationship, while this tendency becomes opposite due to the nonlinear role of mandrel die; （4） The size factor D/t can be used as a nondimensional index to evaluate both the bending formability regarding the wall thinning and cross-section deformation.
基金Supported by National Natural Science Foundation of China (No.50638030, 50528808)the National Key Technologies R&D Program of China (No.2006BAJ13B02)the Australian Research Council (No.DP0774061).
文摘Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.
基金The project, supported by the National Natural Science Foundation of China (19891180, 19925211) and by the Chinese Academy of Sciences (KJ951-1-201) and "Bai Ren" plan
文摘The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly using the conventional elastic-plastic theory. It is because that no length scale parameters are involved in the conventional theory. In the present research, using the strain gradient plasticity theory, a systematic research of the particle size effect in the particulate metal matrix composite is carried out. The roles of many composite factors, such as: the particle size, the Young's modulus of the particle, the particle aspect ratio and volume fraction, as well as the plastic strain hardening exponent of the matrix material, are studied in detail. In order to obtain a general understanding for the composite behavior, two kinds of particle shapes, ellipsoid and cylinder, are considered to check the strength dependence of the smooth or non-smooth particle surface. Finally, the prediction results will be applied to the several experiments about the ceramic particle-reinforced metal-matrix composites. The material length scale parameter is predicted.
基金the National Natural Science Foundation of China(Nos.U22A20166,51904190,12172230,11872258 and U19A2098)the Department of Science and Technology of Guangdong Province(No.2019ZT08G315)MOE Laboratory of Deep Earth Science and Engineering(No.DESE202102).
文摘Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture toughness, effective fracture energy and fracture process zone(FPZ) size of geomaterials were first analyzed by systematic size effect fracture experiments. The results showed that the nominal strength and the apparent fracture toughness decreased with increasing bedding plane inclination angle.The larger the specimen size was, the smaller the nominal strength and the larger the apparent fracture toughness was. When the bedding inclination angle increased from 0° to 90°, the effective fracture energy and the effective FPZ size both first decreased and then increased within two complex variation stages that were bounded by the 45° bedding angle. Regardless of the inherent anisotropy of geomaterials,the nominal strength and apparent fracture toughness can be predicted by the energy-based size effect law, which demonstrates that geomaterials have obvious quasi-brittle characteristics. Theoretical analysis indicated that the true fracture toughness and energy dissipation can be calculated by linear elastic fracture mechanics only when the brittleness number is higher than 10;otherwise, size effect tests should be adopted to determine the fracture parameters.
基金The work reported here is funded by Australian Coal Industry’s Research Program(ACARP)grant no.C26063.
文摘Estimation of horizontal stress magnitudes from borehole breakouts has been an attractive topic in the petroleum and mining industries,although there are critical research gaps that remain unfilled.In this paper,numerical simulation is conducted on Gosford sandstone to investigate the borehole breakout and its associated borehole size effect,including temperature influence.The discrete element method(DEM)model shows that the borehole breakout angular span is constant after the initial formation,whereas its depth propagates along the minimum horizontal stress direction.This indicates that the breakout angular span is a reliable parameter for horizontal stress estimation.The borehole size effect simulations illustrated the importance of borehole size on breakout geometries in which smaller borehole size leads to higher breakout initiation stress as well as the stress re-distribution from borehole wall outwards through micro-cracking.This implies that the stress may be averaged over a distance around the borehole and breakout initiation occurs at the borehole wall rather than some distance into the rock.In addition,the numerical simulation incorporated the thermal effect which is widely encountered in deep geothermal wells.Based on the results,the higher temperature led to lower breakout initiation stress with same borehole size,and more proportion of shear cracks was generated under higher temperature.This indicates that the temperature might contribute to the micro-fracturing mode and hence influences the horizontal stress estimation results from borehole breakout geometries.Numerical simulation showed that breakout shape and dimensions changed considerably under high stress and high temperature conditions,suggesting that the temperature may need to be considered for breakout stress analysis in deep locations.
基金Project 50508005 supported by the National Natural Science Foundations of China
文摘In this paper the coefficient and law of the size effect of RPC were studied through experiments and theoretical analysis. The size-effect coefficients for the compressive strength of RPC are deduced through experiments.They indicate that RPC without fiber behaves quite the same as normal or high strength concrete.The size effect on compressive strength is more prominent in RPC containing fiber.Bazant's size effect formula of compressive strength applies to RPC.A formula is given to predict the compressive strength of cubic RPC specimens 100 mm on a side where the fiber dosage ranges from 0-2%.
基金the National Natural Science Foundation of China(Grant Nos.51971188 and 51071134)the Science and Technology Major Project of Hunan Province(Grant No.2019GK 1012)+1 种基金Huxiang High-Level Talent Gathering Program of Hunan Province-In novative team(Grant No.2019RS1059)the Degree and Postgraduate Education Reform Project of Hunan Province(Grant No,CX20190493),All of this support is gratefully acknowledged.
文摘This paper uses the discrete element method to model the size and cushion effects during single-particle crushing tests.We propose simplified numerical modeling to examine the effects of particle size and coordination number on particle breakage behavior.We validate the proposed modeling by comparing the numerical results with the experimental data reported in the literature,in terms of the variability of particle tensile strength and axial force-displacement responses.Based on the numerical results,it is clear that a larger particle size entails a higher tensile strength with a larger discreteness.In addition,the characteristic tensile strength increases linearly with an increasing coordination number.Moreover,smaller particles are more susceptible to the cushion effect than larger particles.The numerical results also indicate that an increasing coordination number induces a more ductile mode of failure.Based on these results,we propose an empirical equation for calculating tensile strength,incorporating both the cushion effect and the size effect.
文摘Six kinds of micro bridge-beam specimens with different sizes are fabricated using photolithography technology for bending test. Beam specimens with trapezoidal section could be representatives of those with rectangle and square section, which are usually applied in MEMS. Nano indentation method used in bending test can be applied to both elastic and plastic materials. Also, some mechanical properties parameters such as the modulus of elasticity, hardness and the bending strength are obtained. The average modulus of elasticity of SCS is 170.295 0±2.485 0 GPa, showing no size effects, but the bending strength ranges from 3.24 GPa to 10.15 GPa, displaying strong size effects, and the average hardness is 9.496 7±1.753 3 GPa,in which no obvious size effects are observed.
基金supported by the National Basic Research Program of China (No. 2013CB933100)the National Natural Science Foundation of China (21173174, 21161130522, 21033006 and 20923004)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University (No. IRT1036)the Research Fund for the Doctoral Program of Higher Education (No. 20090121110007)
文摘Carbon nanotube （CNT）-supported Ru nanoparticles with mean sizes ranging from 2.3 to 9.2 nm were prepared by different post-treatments and studied for Fischer-Tropsch （FT） synthesis. The effects of Ru particle size on catalytic behaviors were investigated at both shorter and longer contact times. At shorter contact time, where the secondary reactions were insignificant, the turnover frequency （TOF） for CO conversion was dependent on the mean size of Ru particles; TOF increased with the mean size of Ru particles from 2.3 to 6.3 nm and then decreased slightly. At the same time, the selectivities to C5＋ hydrocarbons increased gradually with the mean size of Ru particles up to 6.3 nm and then kept almost unchanged with a further increase in Ru particle size. At longer contact time, C10-C20 selectivity increased significantly at the expense of C21＋ selectivity, suggesting the occurrence of the selective hydrocracking of C21＋ to C10-C20 hydrocarbons.
基金the National Natural Science Foundation of China(Nos.51975031,52075023,51635005)Defense Industrial Technology Development Program,China(No.JCKY2018601C207)。
文摘In order to clarify the influence of grain size on cyclic deformation response of superalloy sheets and springback behavior,cyclic loading-unloading and shearing tests were performed on the superalloy foils with 0.2 mm in thickness and diverse grain sizes.The results show that,the decline ratio of elastic modulus is weakened with increasing grain size,and the Bauschinger effect becomes evident with decreasing grain size.Meanwhile,U-bending test results determine that the springback is diminished with increasing grain size.The Chaboche,Anisotropic Nonlinear Kinematic(ANK)and Yoshida-Uemori(Y-U)models were utilized to fit the shear stress-strain curves of specimens.It is found that Y-U model is sufficient of predicting the springback.However,the prediction accuracy is degraded with increasing grain size.
基金the financial support of the project from the National Natural Science Foundation of China (No. 51771147)。
文摘A significant size effect is found in the Al3 Sc dispersoid-mediated precipitation in an Al-Mg-Si-Sc alloy.When the Al3 Sc dispersoid size smaller than about 40 nm,β " precipitates nucleate directly on the coherent dispersoids and grow by sacrificing the latter.While the dispersoid size greater than^40 nm,Q' and U2 phases are additionally produced that nucleate on the dislocations induced by the semi-/incoherent dispersoids.Mechanical and electrical properties are highly sensitive to the Al3 Sc dispersoid-tuned precipitation.The co-precipitation of β",Q' and U2 phases leads to an obvious improvement in hardness and simultaneously in electrical conductivity.
基金Financial support is from the NSFC(Grant Nos.11602257,11472257,11272300,11572299)funded by the key subject"Computational Solid Mechanics"of the China Academy of Engineering Physics
文摘In order to investigate the effect of sample size on the dynamic torsional behaviour of the 2A12 aluminium alloy. In this paper, torsional split Hopkinson bar tests are conducted on this alloy with different sample dimensions. It is found that with the decreasing gauge length and thickness, the tested yield strength increases. However, the sample innerlouter diameter has little effect on the dynamic torsional behaviour. Based on the finite element method, the stress states in the alloy with different sample sizes are analysed. Due to the effect of stress concentration zone （SCZ）, the shorter sample has a higher yield stress. Furthermore, the stress distributes more uniformly in the thinner sample, which leads to the higher tested yield stress. According to the experimental and simulation analysis, some suggestions on choosing the sample size are given as well.
基金The research was supported by the National Basic Research Program of China (Grant 2012CB937500),the National Natural Science Foundation of China (Grants 91216108,11432014),and the CAS/SAFEA International Partnership Program for Creative Reserch Teams
文摘In the present research, hierarchical structure observation and mechanical property characterization for a type of biomaterial are carried out. The investigated bioma- terial is Hyriopsis cumingii, a typical limnetic shell, which consists of two different structural layers, a prismatic ＂pillar＂ structure and a nacreous ＂brick and mortar＂ structure. The prismatic layer looks like a ＂pillar forest＂ with variationsection pillars sized on the order of several tens of microns. The nacreous material looks like a ＂brick wall＂ with bricks sized on the order of several microns. Both pillars and bricks are composed of nanoparticles. The mechanical properties of the hierarchical biomaterial are measured by using the nanoindentation test. Hardness and modulus are measured for both the nacre layer and the prismatic layer, respectively. The nanoindentation size effects for the hierarchical structural materials are investigated experimentally. The results show that the prismatic nanostructured material has a higher stiffness and hardness than the nacre nanostructured material. In addition, the nanoindentation size effects for the hierarchical structural materials are described theoretically, by using the trans-scale mechanics theory considering both strain gradient effect and the surface/interface effect. The modeling results are consistent with experimental ones.
