Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[1...Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[10]uril-based single-layer 2D supramolecular-organic-frameworks(Q[10]-SOFs)in water.Importantly,the 2D Q[10]-SOFs can further serve as light harvesting antenna,achieving fast energy transfer to the embedded redox-active TSA upon photoexcitation,resulting in efficient visible light-driven selective oxidation of benzyl alcohols into the corresponding aldehydes in high yield at room temperature.Further studies revealed that the integrated of 2D Q[10]-SOFs and TSA played a key role in the catalytic process,due to the presence of a novel stepwise electron transfer route in the single-layer hybrid 2D structures.展开更多
Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temper...Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temperature variations due to dynamic environmental coupling.These differences can affect structural performance and pose safety risks.Here,a systematic numerical method was developed and applied to simulate long-term temperature variations in such a structure under real environmental conditions,revealing its non-uniform distribution characteristics and time-variant regularity.A simplified design method for non-uniform thermal loads,accounting for time-variant environmental factors,was theoretically derived and validated through experiments and simulations.The maximum deviation and mean error rate between calculated and tested results were 6.1℃ and 3.7%,respectively.Calculated temperature fields aligned with simulated ones,with deviations under 6.0℃.Using the design method,non-uniform thermal effects of the structure are analyzed.Maximum member stress and nodal displacement under non-uniform thermal loads reached 119.3 MPa and 19.7 mm,representing increases of 167.5%and 169.9%,respectively,compared to uniform thermal loads.The impacts of healing construction time on non-uniform thermal effects were evaluated,resulting in construction recommendations.The methodologies and conclusions presented here can serve as valuable references for the thermal design,construction,and control of single-layer spherical reticulated shells or similar structures.展开更多
Combining theory and computation,we explore the Goos–H¨anchen(GH)effect for electrons in a single-layered semiconductor microstructure(SLSM)modulated by Dresselhaus spin–orbit coupling(SOC).GH displacement depe...Combining theory and computation,we explore the Goos–H¨anchen(GH)effect for electrons in a single-layered semiconductor microstructure(SLSM)modulated by Dresselhaus spin–orbit coupling(SOC).GH displacement depends on electron spins thanks to Dresselhaus SOC,therefore electron spins can be separated from the space domain and spinpolarized electrons in semiconductors can be realized.Both the magnitude and sign of the spin polarization ratio change with the electron energy,in-plane wave vector,strain engineering and semiconductor layer thickness.The spin polarization ratio approaches a maximum at resonance;however,no electron-spin polarization occurs in the SLSM for a zero in-plane wave vector.More importantly,the spin polarization ratio can be manipulated by strain engineering or semiconductor layer thickness,giving rise to a controllable spatial electron-spin splitter in the field of semiconductor spintronics.展开更多
The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave...The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.展开更多
Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is...Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.展开更多
We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic st...We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.展开更多
With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive ...With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive release of vehicle exhaust seriously damages the natural environment,and the environmental crisis is becoming increasingly serious.This article follows the principles of improving fuel efficiency,reducing emissions,andenhancing vehicle performance.Using NX 12.0 software,a three-dimensional model of a certain type of dump truck frame is constructed based on actual parameters.ANSYS Workbench is used to simplify the geometric model,mesh division,and material definition,and a finite element model is constructed.Obtain the structural performance and natural vibration characteristics of the original chassis under four typical working conditions:bending,torsion,lifting,and unloading,through static analysis and modal analysis.On this basis,the dimensions of the components that bear less load on the original frame were optimized,and the topology of the second crossbeam and rear end corner of the subframe that bear less load on the original frame was optimized to obtain a new frame.The new frame of the dump truck underwent secondary static analysis and modal analysis,and it was found that the weight of the new frame decreased by 41.03 kg,successfully reducing the weight of the frame by 4.38%,improving the vehicle's handling and stability,and extending its service life.展开更多
Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered secur...Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.展开更多
Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,genera...Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.展开更多
A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector s...A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector solution scheme.Previous research by the authors proposed a design equation to determine the required minimum number of load increments based on an evaluation of the elastic critical buckling load ratio.Further research has shown that an approximate amplification factor equation that is based on the B2 multiplier equation produces similar results when the amplification factor is less than approximately four.Eleven moment frames are used to verify the use of the new approximate amplification factor in the proposed design equation.展开更多
With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering ty...With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering type,although the construction technology has been relatively mature,but its earthquake collapse ability still needs to be strengthened.This paper analyzes the specific factors that affect the seismic collapse ability of reinforced concrete frame structure,summarizes the previous research results,and puts forward innovative application of fiber-reinforced polymer(FRP)composite materials,play the role of smart materials,improve the isolation and energy dissipation devices,etc.,to promote the continuous optimization of reinforced concrete frame structure design,and show better seismic performance.展开更多
Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AR...Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AREMA(2023),Manual for Railway Engineering-Volume 2-Structures,with systematic comparisons of techno-economic differences between the Chinese and American codes through recalculation verification and equivalent-precision design methods.The findings reveal:Recalculation using the Chinese code for identical structural dimensions and reinforcement layouts demonstrates that AREMA code exhibits greater conservatism in both strength requirements and crack control;Under equivalent precision design principles,the Chinese code solution reduces reinforcement by 4.128 t tons and a 19.5%reduction in reinforcement at critical sections compared to the AREMA code,indicating slightly reduced economic efficiency of the AREMA code.This research provides quantitative references for standardized design and specification integration in cross-border railway engineering projects.展开更多
High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped ...High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped steel support frame(VCDFS)with viscous dampers to reduce seismic responses of both tall and low-rise electrical equipment.The VCDFS contains a trapezoidal damper layer to generate rocking motions,enabling the diagonal viscous dampers to dissipate seismic inputs.A theoretical model of post equipment with VCDFS is established,and an optimal design procedure is proposed.The analysis shows that the remaining static stiffness ratio λ_(k) is the key parameter that determines the effectiveness of the VCDFS.The VCDFS reduces the average displacement and stress response of a post insulator by 39.4%and 44.6%,respectively,together with a significant decrease in the dynamic amplification factor.Therefore,it is recommended to use the VCDFS instead of the conventional latticed-steel frame in earthquake zones.展开更多
Frame blades were used to replace traditional propeller blades to enhance the leaching step efficiency of Becher process.A combined approach of leaching,electrochemical experiments,and numerical simulations was employ...Frame blades were used to replace traditional propeller blades to enhance the leaching step efficiency of Becher process.A combined approach of leaching,electrochemical experiments,and numerical simulations was employed.Results demonstrate a significant improvement in leaching efficiency using frame blades compared to propellers,reducing reaction time from 15 to 10 h.Even at a stirring speed of 300 r/min,frame blades perform better than propellers at 500 r/min.Kinetics analysis indicates that the leaching process is controlled by surface chemical reactions.CFD-PBM simulations reveal that frame blades at 300 r/min generate larger bubbles and higher turbulent kinetic energy than propeller blades at 500 r/min.Frame blades enhance leaching efficiency by refining bubble size to improve oxygen mass transfer and by increasing turbulent kinetic energy for better mixing.展开更多
Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engin...Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engineering Technology and Jiangsu Provincial Enterprise Technology Center.The company has obtained SGS-certified ISO9001 quality management system,a globally recognized standard.Niupai specializes in the R&D and manufacturing of cam shedding device,dobby shedding device,jacquard shedding device and heald frames for water-jet looms,air-jet looms as well as rapier looms.展开更多
To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force...To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.展开更多
The authors regret that the original publication of this paper did not include Jawad Fayaz as a co-author.After further discussions and a thorough review of the research contributions,it was agreed that his significan...The authors regret that the original publication of this paper did not include Jawad Fayaz as a co-author.After further discussions and a thorough review of the research contributions,it was agreed that his significant contributions to the foundational aspects of the research warranted recognition,and he has now been added as a co-author.展开更多
The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer lat...The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer latticed dome with a diameter of 50 m as an example, its imperfection sensitive region is made up of the first 12 kinds of joints. The influence of the imperfections of support joints on the stability of the K6 single-layer latticed dome is negligible. Influences of the joint imperfections of the main rib and the secondary rib on the structural stability are similar. The initial deviations of these joints all greatly lower the critical load of the dome. Results show that the method can analyze the structural imperfection sensitive region quantitatively and accurately.展开更多
Single-layer superconductors are ideal materials for fabricating superconducting nano devices.However,up to date,very few single-layer elemental superconductors have been predicted and especially no one has been succe...Single-layer superconductors are ideal materials for fabricating superconducting nano devices.However,up to date,very few single-layer elemental superconductors have been predicted and especially no one has been successfully synthesized yet.Here,using crystal structure search techniques and ab initio calculations,we predict that a single-layer planar carbon sheet with 4-and 8-membered rings called T-graphene is a new intrinsic elemental superconductor with superconducting critical temperature(Tc)up to around 20.8 K.More importantly,we propose a synthesis route to obtain such a single-layer T-graphene,that is,a T-graphene potassium intercalation compound(C4 K with P4/mmm symmetry)is firstly synthesized at high pressure(>11.5 GPa)and then quenched to ambient condition;and finally,the single-layer T-graphene can be either exfoliated using the electrochemical method from the bulk C4 K,or peeled off from bulk T-graphite C4,where C4 can be obtained from C4 K by evaporating the K atoms.Interestingly,we find that the calculated Tc of C4 K is about 30.4 K at 0 GPa,which sets a new record for layered carbon-based superconductors.The present findings add a new class of carbon-based superconductors.In particular,once the single-layer T-graphene is synthesized,it can pave the way for fabricating superconducting devices together with other 2 D materials using the layer-by-layer growth techniques.展开更多
基金supported by the National Natural Science Foundation of China(No.22271090)。
文摘Herein,a simple and effective outer-surface interactions assisted supramolecular hierarchical assembly has been first exploited to uniformly distribute tungstosilicic acid(TSA)inside the porous structure of cucurbit[10]uril-based single-layer 2D supramolecular-organic-frameworks(Q[10]-SOFs)in water.Importantly,the 2D Q[10]-SOFs can further serve as light harvesting antenna,achieving fast energy transfer to the embedded redox-active TSA upon photoexcitation,resulting in efficient visible light-driven selective oxidation of benzyl alcohols into the corresponding aldehydes in high yield at room temperature.Further studies revealed that the integrated of 2D Q[10]-SOFs and TSA played a key role in the catalytic process,due to the presence of a novel stepwise electron transfer route in the single-layer hybrid 2D structures.
基金This work is supported by the National Natural Science Foundation of China(Nos.51578491 and 52238001).
文摘Contrary to conventional design methods that assume uniform and slow temperature changes tied to atmospheric conditions,single-layer spherical reticulated shells undergo significant non-uniform and time-variant temperature variations due to dynamic environmental coupling.These differences can affect structural performance and pose safety risks.Here,a systematic numerical method was developed and applied to simulate long-term temperature variations in such a structure under real environmental conditions,revealing its non-uniform distribution characteristics and time-variant regularity.A simplified design method for non-uniform thermal loads,accounting for time-variant environmental factors,was theoretically derived and validated through experiments and simulations.The maximum deviation and mean error rate between calculated and tested results were 6.1℃ and 3.7%,respectively.Calculated temperature fields aligned with simulated ones,with deviations under 6.0℃.Using the design method,non-uniform thermal effects of the structure are analyzed.Maximum member stress and nodal displacement under non-uniform thermal loads reached 119.3 MPa and 19.7 mm,representing increases of 167.5%and 169.9%,respectively,compared to uniform thermal loads.The impacts of healing construction time on non-uniform thermal effects were evaluated,resulting in construction recommendations.The methodologies and conclusions presented here can serve as valuable references for the thermal design,construction,and control of single-layer spherical reticulated shells or similar structures.
基金Project supported by the National Natural Science Foundation of China(Grant No.62164005).
文摘Combining theory and computation,we explore the Goos–H¨anchen(GH)effect for electrons in a single-layered semiconductor microstructure(SLSM)modulated by Dresselhaus spin–orbit coupling(SOC).GH displacement depends on electron spins thanks to Dresselhaus SOC,therefore electron spins can be separated from the space domain and spinpolarized electrons in semiconductors can be realized.Both the magnitude and sign of the spin polarization ratio change with the electron energy,in-plane wave vector,strain engineering and semiconductor layer thickness.The spin polarization ratio approaches a maximum at resonance;however,no electron-spin polarization occurs in the SLSM for a zero in-plane wave vector.More importantly,the spin polarization ratio can be manipulated by strain engineering or semiconductor layer thickness,giving rise to a controllable spatial electron-spin splitter in the field of semiconductor spintronics.
基金Supported by the Short-wave Infrared Camera Systems(B025F40622024)。
文摘The accuracy of spot centroid positioning has a significant impact on the tracking accuracy of the system and the stability of the laser link construction.In satellite laser communication systems,the use of short-wave infrared wavelengths as beacon light can reduce atmospheric absorption and signal attenuation.However,there are strong non-uniformity and blind pixels in the short-wave infrared image,which makes the image distorted and leads to the decrease of spot centroid positioning accuracy.Therefore,the high-precision localization of the spot centroid of the short-wave infrared images is of great research significance.A high-precision spot centroid positioning model for short-wave infrared is proposed to correct for non-uniformity and blind pixels in short-wave infrared images and quantify the localization errors caused by the two,further model-based localization error simulations are performed,and a novel spot centroid positioning payload for satellite laser communications has been designed using the latest 640×512 planar array InGaAs shortwave infrared detector.The experimental results show that the non-uniformity of the corrected image is reduced from 7%to 0.6%,the blind pixels rejection rate reaches 100%,the frame rate can be up to 2000 Hz,and the spot centroid localization accuracy is as high as 0.1 pixel point,which realizes high-precision spot centroid localization of high-frame-frequency short-wave infrared images.
文摘Stepping out of Danyang Railway Station,the large sign reading“China Danyang Optical City”immediately comes into view across the road.Inside the bustling marketplace,a dazzling array of eyeglass frames and lenses is neatly displayed in rows of shops,attracting consumers from across the country.
基金supported by the National Key R&D Program of China,Grant No.2020YFA0712700the National Natural Science Foundation of China‘Mathematical Basic Theory of Quantum Computing’special project,Grant No.12341103。
文摘We connect magic(non-stabilizer)states,symmetric informationally complete positive operator valued measures(SIC-POVMs),and mutually unbiased bases(MUBs)in the context of group frames,and study their interplay.Magic states are quantum resources in the stabilizer formalism of quantum computation.SIC-POVMs and MUBs are fundamental structures in quantum information theory with many applications in quantum foundations,quantum state tomography,and quantum cryptography,etc.In this work,we study group frames constructed from some prominent magic states,and further investigate their applications.Our method exploits the orbit of discrete Heisenberg-Weyl group acting on an initial fiducial state.We quantify the distance of the group frames from SIC-POVMs and MUBs,respectively.As a simple corollary,we reproduce a complete family of MUBs of any prime dimensional system by introducing the concept of MUB fiducial states,analogous to the well-known SIC-POVM fiducial states.We present an intuitive and direct construction of MUB fiducial states via quantum T-gates,and demonstrate that for the qubit system,there are twelve MUB fiducial states,which coincide with the H-type magic states.We compare MUB fiducial states and SIC-POVM fiducial states from the perspective of magic resource for stabilizer quantum computation.We further pose the challenging issue of identifying all MUB fiducial states in general dimensions.
文摘With the rapid growth of China's economic strength,the demand and market share are also constantly increasing.The number ofcars is rapidly increasing,and a large amount of fuel is consumed as a result.The massive release of vehicle exhaust seriously damages the natural environment,and the environmental crisis is becoming increasingly serious.This article follows the principles of improving fuel efficiency,reducing emissions,andenhancing vehicle performance.Using NX 12.0 software,a three-dimensional model of a certain type of dump truck frame is constructed based on actual parameters.ANSYS Workbench is used to simplify the geometric model,mesh division,and material definition,and a finite element model is constructed.Obtain the structural performance and natural vibration characteristics of the original chassis under four typical working conditions:bending,torsion,lifting,and unloading,through static analysis and modal analysis.On this basis,the dimensions of the components that bear less load on the original frame were optimized,and the topology of the second crossbeam and rear end corner of the subframe that bear less load on the original frame was optimized to obtain a new frame.The new frame of the dump truck underwent secondary static analysis and modal analysis,and it was found that the weight of the new frame decreased by 41.03 kg,successfully reducing the weight of the frame by 4.38%,improving the vehicle's handling and stability,and extending its service life.
文摘Ensuring the secure transmission of secret messages,particularly through video—one of the most widely used media formats—is a critical challenge in the field of information security.Relying on a single-layered security approach is often insufficient for safeguarding sensitive data.This study proposes a triple-lightweight cryptographic and steganographic model that integrates the Hill Cipher Technique(HCT),Rotation Left Digits(RLD),and Discrete Wavelet Transform(DWT)to embed secret messages within video frames securely.The approach begins with encrypting the secret text using a private key matrix(PK^(1))of size 2×2 up to 6×6 via HCT.A second encryption layer is applied using a dynamic private key(PK2)derived from the RGB pixel values of the video frame,resulting in a rotated cipher.The doubly encrypted message is then embedded into the video frames using the DWT method.Upon transmission,the concealed message is extracted using inverse DWT and decrypted in two steps—first with PK2 and then with the inverse of PK^(1).Experiments conducted using MPEG video sequences and message lengths ranging from 10 to 300 bytes demonstrate strong performance in terms of Mean Square Error(MSE),Peak Signal-to-Noise Ratio(PSNR),and Correlation Coefficient(CC)between original and encrypted messages.The similarity between original and stego frames is further validated using Structural Similarity Index(SSIM),Mean Absolute Error(MAE),Number of Pixel Change Rate(NPCR),and Unified Average Changing Intensity(UACI).Results confirm that utilizing video frames to generate PK2 offers superior security compared to static key images.Moreover,the indistinguishability between original and stego frames highlights the method’s robustness against visual and statistical attacks.
基金supported by the Natural Science Foundation of Sichuan Province(Grant No.25QNJJ4066)。
文摘Improvement of the detection ability of quantum entanglement is one of the essential tasks in quantum computing and quantum information.Finite tight frames play a fundamental role in a wide variety of areas and,generally,each application requires a specific class of frames and is closely related to quantum measurement.It is worth noting that a maximal set of complex equiangular vectors is closely related to a symmetric informationally complete measurement.Hence,our goal in this work is to propose a series of separability criteria assigned to a finite tight frame and some well-known inequalities in different quantum systems,respectively.In addition,some tighter criteria to detect entanglement for many-body quantum states are presented in arbitrary dimensions.Finally,the effectiveness of the proposed entanglement detection criteria is illustrated through some detailed examples.
文摘A relationship was discovered between the amplification factor and the number of load increments that are needed to limit the relative error to one percent in second-order elastic analyses with a predictor-corrector solution scheme.Previous research by the authors proposed a design equation to determine the required minimum number of load increments based on an evaluation of the elastic critical buckling load ratio.Further research has shown that an approximate amplification factor equation that is based on the B2 multiplier equation produces similar results when the amplification factor is less than approximately four.Eleven moment frames are used to verify the use of the new approximate amplification factor in the proposed design equation.
文摘With the development of modern society,people put forward higher requirements for building safety,which makes the construction project face new challenges.Reinforced concrete frame structure as a common engineering type,although the construction technology has been relatively mature,but its earthquake collapse ability still needs to be strengthened.This paper analyzes the specific factors that affect the seismic collapse ability of reinforced concrete frame structure,summarizes the previous research results,and puts forward innovative application of fiber-reinforced polymer(FRP)composite materials,play the role of smart materials,improve the isolation and energy dissipation devices,etc.,to promote the continuous optimization of reinforced concrete frame structure design,and show better seismic performance.
文摘Based on the Etihad Railway Station Project,this study selects a single-span frame bridge with a clear span of 7.3 meters as the research object.A comprehensive structural design process was conducted following the AREMA(2023),Manual for Railway Engineering-Volume 2-Structures,with systematic comparisons of techno-economic differences between the Chinese and American codes through recalculation verification and equivalent-precision design methods.The findings reveal:Recalculation using the Chinese code for identical structural dimensions and reinforcement layouts demonstrates that AREMA code exhibits greater conservatism in both strength requirements and crack control;Under equivalent precision design principles,the Chinese code solution reduces reinforcement by 4.128 t tons and a 19.5%reduction in reinforcement at critical sections compared to the AREMA code,indicating slightly reduced economic efficiency of the AREMA code.This research provides quantitative references for standardized design and specification integration in cross-border railway engineering projects.
基金Guangdong Basic and Applied Basic Research Foundation under Grant Nos.2022A1515110561 and 2023A1515010072Natural Science Foundation of China under Grant Nos.52308488 and 52378499。
文摘High-voltage electrical post equipment is generally installed on steel supports,which amplifies the seismic inputs and degrades the seismic performance of equipment.This study proposed a variable cross-section damped steel support frame(VCDFS)with viscous dampers to reduce seismic responses of both tall and low-rise electrical equipment.The VCDFS contains a trapezoidal damper layer to generate rocking motions,enabling the diagonal viscous dampers to dissipate seismic inputs.A theoretical model of post equipment with VCDFS is established,and an optimal design procedure is proposed.The analysis shows that the remaining static stiffness ratio λ_(k) is the key parameter that determines the effectiveness of the VCDFS.The VCDFS reduces the average displacement and stress response of a post insulator by 39.4%and 44.6%,respectively,together with a significant decrease in the dynamic amplification factor.Therefore,it is recommended to use the VCDFS instead of the conventional latticed-steel frame in earthquake zones.
基金supported by the National Natural Science Foundation of China(No.U1908225)the Cross-Integration and Collaborative Development Project of Northeastern University,China(No.N2225013).
文摘Frame blades were used to replace traditional propeller blades to enhance the leaching step efficiency of Becher process.A combined approach of leaching,electrochemical experiments,and numerical simulations was employed.Results demonstrate a significant improvement in leaching efficiency using frame blades compared to propellers,reducing reaction time from 15 to 10 h.Even at a stirring speed of 300 r/min,frame blades perform better than propellers at 500 r/min.Kinetics analysis indicates that the leaching process is controlled by surface chemical reactions.CFD-PBM simulations reveal that frame blades at 300 r/min generate larger bubbles and higher turbulent kinetic energy than propeller blades at 500 r/min.Frame blades enhance leaching efficiency by refining bubble size to improve oxygen mass transfer and by increasing turbulent kinetic energy for better mixing.
文摘Jiangsu Niupai Machinery&Elecronics Co,ltd.is National Specialized and New"Little Giant"Enterprise,National High&New Technological Enterprise,Jiangsu Provincial Research Center of Loom Shedding Engineering Technology and Jiangsu Provincial Enterprise Technology Center.The company has obtained SGS-certified ISO9001 quality management system,a globally recognized standard.Niupai specializes in the R&D and manufacturing of cam shedding device,dobby shedding device,jacquard shedding device and heald frames for water-jet looms,air-jet looms as well as rapier looms.
基金The National Natural Science Foundation of China(No.52078427).
文摘To ensure the operational safety of railways in the landslide-prone areas of mountainous regions,a large-scale model test and numerical simulation were conducted to study the bending moment distribution,internal force distribution,deformation development,and crack propagation characteristics of a framed anti-sliding structure(FAS)under landslide thrust up to the point of failure.Results show that the maximum bending moment and its increase rate in the fore pile are greater than those in the rear pile,with the maximum bending moment of the fore pile approximately 1.1 times that of the rear pile.When the FAS fails,the displacement at the top of the fore pile is significantly greater,about 1.27 times that of the rear pile in the experiment.Major cracks develop at locations corresponding to the peak bending moments.Small transverse cracks initially appear on the upper surface at the intersection between the primary beam and rear pile and then spread to the side of the structure.At the failure stage,major cracks are observed at the pil-beam intersections and near the anchor points.Strengthening flexural stiffness at intersections where major cracks occur can improve the overall thrust-deformation coordination of the FAS,thereby maximizing its performance.
文摘The authors regret that the original publication of this paper did not include Jawad Fayaz as a co-author.After further discussions and a thorough review of the research contributions,it was agreed that his significant contributions to the foundational aspects of the research warranted recognition,and he has now been added as a co-author.
文摘The concept of the imperfection sensitive region is given. The advanced stochastic imperfection method is used to research the imperfection sensitive region of single-layer latticed domes. Taking a K6 single-layer latticed dome with a diameter of 50 m as an example, its imperfection sensitive region is made up of the first 12 kinds of joints. The influence of the imperfections of support joints on the stability of the K6 single-layer latticed dome is negligible. Influences of the joint imperfections of the main rib and the secondary rib on the structural stability are similar. The initial deviations of these joints all greatly lower the critical load of the dome. Results show that the method can analyze the structural imperfection sensitive region quantitatively and accurately.
基金Supported by the National Key Research and Development Program of China under Grant No 2016YFA0300404the National Basic Research Program of China under Grant No 2015CB921202+2 种基金the National Nature Science Foundation of China under Grant Nos 11574133 and 11834006the Nature Science Foundation of Jiangsu Province under Grant No BK20150012the Fundamental Research Funds for the Central Universities,the Science Challenge Project(No TZ2016001)
文摘Single-layer superconductors are ideal materials for fabricating superconducting nano devices.However,up to date,very few single-layer elemental superconductors have been predicted and especially no one has been successfully synthesized yet.Here,using crystal structure search techniques and ab initio calculations,we predict that a single-layer planar carbon sheet with 4-and 8-membered rings called T-graphene is a new intrinsic elemental superconductor with superconducting critical temperature(Tc)up to around 20.8 K.More importantly,we propose a synthesis route to obtain such a single-layer T-graphene,that is,a T-graphene potassium intercalation compound(C4 K with P4/mmm symmetry)is firstly synthesized at high pressure(>11.5 GPa)and then quenched to ambient condition;and finally,the single-layer T-graphene can be either exfoliated using the electrochemical method from the bulk C4 K,or peeled off from bulk T-graphite C4,where C4 can be obtained from C4 K by evaporating the K atoms.Interestingly,we find that the calculated Tc of C4 K is about 30.4 K at 0 GPa,which sets a new record for layered carbon-based superconductors.The present findings add a new class of carbon-based superconductors.In particular,once the single-layer T-graphene is synthesized,it can pave the way for fabricating superconducting devices together with other 2 D materials using the layer-by-layer growth techniques.
