Almost half of the solar energy that reaches a silicon solar cell is lost due to the reflection at the silicon–air interface.Antireflective coatings aim to suppress the reflection and thereby to increase the photogen...Almost half of the solar energy that reaches a silicon solar cell is lost due to the reflection at the silicon–air interface.Antireflective coatings aim to suppress the reflection and thereby to increase the photogenerated current.The conventional few-layer dielectric antireflective coatings may significantly boost the transmission of solar light,but only in a narrow wavelength range.Using forward and inverse design optimization algorithms,we develop the designs of antireflective coatings for silicon solar cells based on single-layer silicon metasurfaces(periodic subwavelength nanostructure arrays),leading to a broadband reflection suppression in the wavelength range from 500 to 1200 nm for the incidence angles up to 60 deg.The reflection averaged over the visible and near-infrared spectra is at the record-low level of approximately 2%and 4.4%for the normal and oblique incidence,respectively.The obtained results demonstrate the potential of machine learning–enhanced photonic nanostructures to outperform the classical antireflective coatings.展开更多
Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon ...Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.展开更多
Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatin...Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achievin...An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achieving a critical load of 87.8 N.Silicon doping induced nanocrystallization and amorphization,increasing the hardness to 26 GPa.At high temperatures,a nanoscale Cr-rich(Cr,Al)_(2)O_(3) layer was formed,effectively inhibiting oxygen diffusion.The coating underwent unique phase transformations,during which Cr_(2)N and amorphous Si3N4 were converted into dispersed SiCr_(3) nanoparticles,which stabilized Cr atoms and suppressed their outward diffusion.Ab initio molecular dynamics simulations revealed that Cr atoms exhibited higher chemical activity and oxygen-capture capability than Al atoms and Si atoms served as diffusion barriers by pinning onto the oxidized surface,considerably improving the oxidation resistance of the coating.展开更多
The high-temperature interaction of nanostructured Lu_(2)Si_(2)O_(7) environmental barrier coatings(EBCs)with calcium-magnesium-aluminosilicate(CMAS)was investigated at 1400℃ for 1,10,25,and 50 h to evaluate the coat...The high-temperature interaction of nanostructured Lu_(2)Si_(2)O_(7) environmental barrier coatings(EBCs)with calcium-magnesium-aluminosilicate(CMAS)was investigated at 1400℃ for 1,10,25,and 50 h to evaluate the coating’s resistance to CMAS corrosion.The results indicate a phase transformation over time,transitioning from Ca_(2)Lu_(8)(SiO_(4))6O_(2) apatite and Lu_(2)Si_(2)O_(7) to solely Lu_(2)Si_(2)O_(7).The interaction of the Lu_(2)Si_(2)O_(7) coating with the CMAS melts was divided into three stages based on the corrosion reaction behavior.The delamination cracks were distributed throughout the interface between the Si bond layer and Lu_(2)Si_(2)O_(7) layer after corroded at 1400℃ for 50 h,signifying coating failure.In addition,the influence of monosilicates,disilicates,and corrosion duration on the recession layer thickness was analyzed by comparing previous reports on RE_(2)SiO_(5)/RE_(2)Si_(2)O_(7) coatings(RE=Gd,Yb,Lu,Er).Furthermore,the variation in the thermally grown oxide layer thickness in CMAS-corroded Lu_(2)Si_(2)O_(7) coatings was systematically investigated.展开更多
Dual-layer thermal barrier coatings(TBCs)with ultrahigh temperature resistance were prepared on the surface of molybdenum-rhenium alloy hot-end components.The preparation of the MoSi_(2)-Gd_(2)Zr_(2)O_(7)dual-layer TB...Dual-layer thermal barrier coatings(TBCs)with ultrahigh temperature resistance were prepared on the surface of molybdenum-rhenium alloy hot-end components.The preparation of the MoSi_(2)-Gd_(2)Zr_(2)O_(7)dual-layer TBCs was designed based on the coefficient of thermal expansion and the coating functionality,and it was completed using atmospheric plasma spraying technique.The microstructure,mechanical properties,and thermal properties were analyzed.Results indicate that the adhesion of the prepared dual-layer composite TBCs is excellent,and no noticeable cracks appear at the interface.Compared with the MoSi_(2)coating with a low fracture toughness(0.88 MPa·m^(1/2)),the Gd_(2)Zr_(2)O_(7)coating exhibits higher fracture toughness(1.74 MPa·m^(1/2))and stronger resistance to crack propagation.The prepared MoSi_(2)-Gd_(2)Zr_(2)O_(7)composite coatings have a high porosity(39%),low thermal conductivity(1.020 W·(m·K)^(−1),1200℃),and low thermal diffusivity(0.249 mm^(2)/s,1200℃).Additionally,they possess a high oxygen-vacancy concentration,which ensures excellent insulation performance.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrate...Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrates.In these coatings,a reactive emulsifier containing phosphate groups can be integrated into the molecular chain during polymerization,which enhances the coating's compactness and corrosion resistance.This work focuses on the synthesis of styrene-butyl acrylate(St-BA)latex and methyl methacrylate-butyl acrylate(MMA-BA)latex using the reactive phosphate emulsifier ANPEO_(10)-P_(1) through seed emulsion polymerization,achieving a conversion rate of approximately 99%and a solid content close to 50%.The resulting coatings from St-BA and MMA-BA latexes demonstrated long-term corrosion protection for carbon steel and aluminum alloy due to in-situ phosphatization,effectively preventing flash rust.Notably,the MMA-BA coating exhibited remarkable durability,enduring immersion for up to 1224 h(51 d)on Q 235 carbon steel before reaching the failure threshold(|Z|0.01 Hz£106Ω·cm^(2))on Q 235 carbon steel.On 5052 aluminum alloy,the St-BA coating maintained|Z|0.01 Hz>10^(8)Ω·cm^(2) for 480 h(20 d).Furthermore,the corrosion resistance of St-BA and MMA BA coatings on Q 235 steel sheet and 5052 aluminum alloy surpassed that of commercially available MMA-BA and St BA coatings after immersion in a 3.5 wt%NaCl aqueous solution.This work also delves into the anticorrosion mechanism of MMA-BA and St-BA coatings.展开更多
The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstru...The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.展开更多
Hafnium carbide(HfC)serves as a critical ablation-resistant coating for C/C composites used on the wing leading edges of high-speed vehicles during atmospheric re-entry[1-3].Under the action of high-temperature,oxidiz...Hafnium carbide(HfC)serves as a critical ablation-resistant coating for C/C composites used on the wing leading edges of high-speed vehicles during atmospheric re-entry[1-3].Under the action of high-temperature,oxidizing gas flow,the HfC coating forms a high-melting-point heterogeneous oxide layer,significantly delaying oxidation of the underlying material and preserving the structural integrity of the C/C composites[4].展开更多
Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicr...Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicrobial,chemical durability,electrical insulation,and UV aging features.Due to their widely anticipation in petroleum,applications in building,conveyance,aerospace,electronics,automobiles and energy,these multi-functional coatings have a tremendous leverage in human life,all technological and scientific subjects.Numerous applications have been made for multilateral polymers like polyurethane(PU),epoxy(EP),polyaniline(PANI)conductive polymer,polypyrrole(PPy),and etc,on various metallic surfaces especially,carbon steel substrate owing to their excellent resistance properties.Practically,nanomaterials can possess potential in the all-interdisciplinary domains of materials science and engineering,chemical and physical sciences,biological and health sciences.As known,the designed polymer nanocomposite coating paradigm is fundamentally constituted from polymer or resin as a vehicle and inorganic nanofillers(nanoparticles and nanocomposites).Some commercialized and excessively employed nanocontainers in polymer nanocomposite coating formulations,like ZnO,TiO_(2),carbon nanotubes(CNTs),clay,SiO_(2),Al_(2)O_(3),graphene,GO,CeO_(2),ZrO_(2),FeTiO_(3),etc were discussed.The current review covered the chemistry and potential applications of the largest utilized multifunctional polymer nanocomposite coatings such as EP,PU and other considerable PNCCs.Lately,a titanic attention was made for epoxy nanocomposites because of their distinct physicochemical characteristics,which result from the combined qualities of the nanoparticles and polymer material unity.In addition,the author incorporated some of his scientific contributions in this area represented in construction of innovative functional polymer nanocomposites for a variety of uses with high economic,industrial impacts and future orientation.Furthermore,some newly published applications of polymer nanocomposite coatings were incorporated and discussed.展开更多
The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal materials.However,limited studies have applied ACM to the corrosion protection properties ...The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal materials.However,limited studies have applied ACM to the corrosion protection properties of organic coatings.This study compared a bare epoxy coating with one containing zinc phosphate corrosion inhibitors,both applied on ACM sensors,to observe their corrosion protection properties over time.Coatings with artificial damage via scratches were exposed to immersion and alternating dry and wet environments,which allowed for monitoring galvanic corrosion currents in real-time.Throughout the corrosion tests,the ACM currents of the zinc phosphate/epoxy coating were considerably lower than those of the blank epoxy coating.The trend in ACM current variations closely matched the results obtained from regular electrochemical tests and surface analysis.This alignment highlights the potential of the ACM technique in evaluating the corrosion protection capabilities of organic coatings.Compared with the blank epoxy coating,the zinc phosphate/epoxy coating showed much-decreased ACM current values that confirmed the effective inhibition of zinc phosphate against steel corrosion beneath the damaged coating.展开更多
TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemi...TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemical and wear tests.The results show that additives can considerably accelerate the formation of MAO coatings.The coatings are mostly composed of rutile and anatase TiO_(2),α-Al_(2)O_(3),γ-Al_(2)O_(3),Al_(2)TiO_(5) and SiO_(2).Sodium silicate and SiO_(2) nanoparticles added to the coating can effectively reduce the size of micropores and increase its thickness,whereas SiO_(2) nanoparticles with superior physical properties can be directly deposited at the discharge channel,significantly increasing the coating's resistance to wear and corrosion.The coating with SiO_(2) nanoparticles exhibits the best overall performance,with the lowest corrosion rate and average friction coefficient of 4.095×10^(-5)mm/a and 0.30,respectively.展开更多
Proton exchange membrane water electrolysis(PEMWE)is one of the most promising strategies to pro-duce green hydrogen energy,and it is crucial to exploit highly conductive and good corrosion-resistant coatings on bipol...Proton exchange membrane water electrolysis(PEMWE)is one of the most promising strategies to pro-duce green hydrogen energy,and it is crucial to exploit highly conductive and good corrosion-resistant coatings on bipolar plates(BPs),one of the core components in PEMWE cells.In this work,NbN coatings are deposited on Ti BPs by magnetron sputtering to improve the corrosion resistance and conductivity,for which the critical process parameters,such as the working pressure,partial nitrogen pressure and de-position temperature are well optimized.It is found that the compact microstructure,highly conductive δ-NbN and uniform nanoparticles play a dominant role in the synergistic improvement of the corrosion resistance and electrical conductivity of NbN coatings.The optimized NbN coatings exhibit excellent cor-rosion resistance with the low corrosion current density of 1.1×10^(-8) A cm^(-2),a high potential value of-0.005 V vs.SCE and a low ICR value of 15.8 mΩcm2@1.5 MPa.Accordingly,NbN coatings can be a promising candidate for the development of the low-cost and high-anti-corrosion Ti BPs of PEMWE.展开更多
Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,a...Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.展开更多
Corrosion activities and related accidents are significant issues for marine facilities,leading to considerable economic losses.Waterborne epoxy(EP)coating has been seen as one of the optimal options for corrosion pro...Corrosion activities and related accidents are significant issues for marine facilities,leading to considerable economic losses.Waterborne epoxy(EP)coating has been seen as one of the optimal options for corrosion protection due to its stable properties and eco-friendliness(0 g/L volatile organic compounds).Nevertheless,several intrinsic deficiencies require improvement,such as fragile mechanical properties and defects(macro and micro),resulting in the continuous deterioration of comprehensive coating performances.In this work,a novel nanocomposite coating with mechanical enhancement,intelligent self-reporting,and active protection is fabricated by integrating the functionalized and compatible graphene oxide/cerium based metal-organic framework multiscale structure(GO-CeMOF-P/M).Notably,the homogenous dispersion of GO-CeMOF-P/M and its chemical interaction with the polymer matrix effectively reduces the defects resulting from solution volatilizing and enhances the compactness,which boosts the tensile strength(32.1 MPa/8.5%)and dry adhesion force(5.8 MPa)of the coating.Additionally,the controllable responsiveness and release of multiscale nanocomposite within external environments endow intelligent active protection and self-reporting characteristics for the GO-CeMOF-P/M-EP coating,making it especially suitable for a variety of practical marine applications.Furthermore,following immersion of 80 d in the aggressive environment,Zf=0.01 Hz value of GO-CeMOF-P/M-EP coating is 1.2×10^(10)Ωcm^(2),which is 164.4 times larger than that of EP coating(7.3×10^(7)Ωcm^(2)),demonstrating remarkably strengthened anti-corrosion ability.Consequently,by offering an intriguing design strategy,the current work anticipates addressing the inherent deficiencies of EP coating and facilitating its practicality and feasibility in real sea environments.展开更多
The corrosion degradation of organic coatings in tropical marine atmospheric environments results in substantial economic losses across various industries.The complexity of a dynamic environment,combined with high cos...The corrosion degradation of organic coatings in tropical marine atmospheric environments results in substantial economic losses across various industries.The complexity of a dynamic environment,combined with high costs,extended experimental periods,and limited data,places a limit on the comprehension of this process.This study addresses this challenge by investigating the corrosion de-gradation of damaged organic coatings in a tropical marine environment using an atmospheric corrosion monitoring sensor and a random forest(RF)model.For damage simulation,a polyurethane coating applied to a Fe/graphite corrosion sensor was intentionally scratched and exposed to the marine atmosphere for over one year.Pearson correlation analysis was performed for the collection and filtering of en-vironmental and corrosion current data.According to the RF model,the following specific conditions contributed to accelerated degrada-tion:relative humidity(RH)above 80%and temperatures below 22.5℃,with the risk increasing significantly when RH exceeded 90%.High RH and temperature exhibited a cumulative effect on coating degradation.A high risk of corrosion occurred in the nighttime.The RF model was also used to predict the coating degradation process using environmental data as input parameters,with the accuracy show-ing improvement when the duration of influential environmental ranges was considered.展开更多
Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,...Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,and investigated their ablation behaviors under an oxyacetylene torch with a heat flux of 2.4 MW m^(-2).It was observed that the x=0.1 oxide scale bulged but was denser,and the x=0.2 oxide scale was blown away due to the formation of excessive liquid.Based on these findings,we further de-veloped a duplex(Hf-Zr-Ta)B_(2)coating that showed a linear recession rate close to zero(0.11μm s^(-1))after two 120-s ablation cycles.It is identified that the resulting oxide scale is mainly composed of(Hf,Zr)_(6)Ta_(2)O_(17)and(Hf,Zr,Ta)O_(2)by performing aberration-corrected(scanning)transmission electron microscopy.The protective mechanism is related to the peritectic transformation of orthorhombic-(Hf,Zr)_(6)Ta_(2)O_(17)to tetragonal-(Hf,Zr,Ta)O_(2)plus Ta-dominated liquid.This study contributes to the develop-ment of Ta-containing multicomponent UHTC bulk and coatings for ultra-high temperature applications.展开更多
基金support of the U.S.Civilian Research and Development Foundation“CRDF Global”(Grant No.G-202401-71609)。
文摘Almost half of the solar energy that reaches a silicon solar cell is lost due to the reflection at the silicon–air interface.Antireflective coatings aim to suppress the reflection and thereby to increase the photogenerated current.The conventional few-layer dielectric antireflective coatings may significantly boost the transmission of solar light,but only in a narrow wavelength range.Using forward and inverse design optimization algorithms,we develop the designs of antireflective coatings for silicon solar cells based on single-layer silicon metasurfaces(periodic subwavelength nanostructure arrays),leading to a broadband reflection suppression in the wavelength range from 500 to 1200 nm for the incidence angles up to 60 deg.The reflection averaged over the visible and near-infrared spectra is at the record-low level of approximately 2%and 4.4%for the normal and oblique incidence,respectively.The obtained results demonstrate the potential of machine learning–enhanced photonic nanostructures to outperform the classical antireflective coatings.
文摘Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.
基金National Natural Science Foundation of China(52272075,52472053)Research Fund of Youth Innovation Promotion Association of CAS,China(2021190)Defense Industrial Technology Development Program(JCKY2021130B007)。
文摘Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
基金financially supported by the National Science and Technology Major Project(No.2024ZD1404705)。
文摘An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achieving a critical load of 87.8 N.Silicon doping induced nanocrystallization and amorphization,increasing the hardness to 26 GPa.At high temperatures,a nanoscale Cr-rich(Cr,Al)_(2)O_(3) layer was formed,effectively inhibiting oxygen diffusion.The coating underwent unique phase transformations,during which Cr_(2)N and amorphous Si3N4 were converted into dispersed SiCr_(3) nanoparticles,which stabilized Cr atoms and suppressed their outward diffusion.Ab initio molecular dynamics simulations revealed that Cr atoms exhibited higher chemical activity and oxygen-capture capability than Al atoms and Si atoms served as diffusion barriers by pinning onto the oxidized surface,considerably improving the oxidation resistance of the coating.
基金supported by the National Science and Technology Major Project of China(No.2017-VI-0020-0093).
文摘The high-temperature interaction of nanostructured Lu_(2)Si_(2)O_(7) environmental barrier coatings(EBCs)with calcium-magnesium-aluminosilicate(CMAS)was investigated at 1400℃ for 1,10,25,and 50 h to evaluate the coating’s resistance to CMAS corrosion.The results indicate a phase transformation over time,transitioning from Ca_(2)Lu_(8)(SiO_(4))6O_(2) apatite and Lu_(2)Si_(2)O_(7) to solely Lu_(2)Si_(2)O_(7).The interaction of the Lu_(2)Si_(2)O_(7) coating with the CMAS melts was divided into three stages based on the corrosion reaction behavior.The delamination cracks were distributed throughout the interface between the Si bond layer and Lu_(2)Si_(2)O_(7) layer after corroded at 1400℃ for 50 h,signifying coating failure.In addition,the influence of monosilicates,disilicates,and corrosion duration on the recession layer thickness was analyzed by comparing previous reports on RE_(2)SiO_(5)/RE_(2)Si_(2)O_(7) coatings(RE=Gd,Yb,Lu,Er).Furthermore,the variation in the thermally grown oxide layer thickness in CMAS-corroded Lu_(2)Si_(2)O_(7) coatings was systematically investigated.
基金Supported by Scientific and Technological Innovation of Shaanxi Provincial State-Owned Capital Operation Budget(2022-056)Institute's Self-Developed Technology Program(0801YK2317)+4 种基金Qin Chuangyuan Cites High-Level Innovation and Entrepreneurship Talent Program(QCYRCXM-2023-120)Qin Chuangyuan Industry Cluster Zone“Four Chains”Integration Program(2024CY-JJQ-46)National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘Dual-layer thermal barrier coatings(TBCs)with ultrahigh temperature resistance were prepared on the surface of molybdenum-rhenium alloy hot-end components.The preparation of the MoSi_(2)-Gd_(2)Zr_(2)O_(7)dual-layer TBCs was designed based on the coefficient of thermal expansion and the coating functionality,and it was completed using atmospheric plasma spraying technique.The microstructure,mechanical properties,and thermal properties were analyzed.Results indicate that the adhesion of the prepared dual-layer composite TBCs is excellent,and no noticeable cracks appear at the interface.Compared with the MoSi_(2)coating with a low fracture toughness(0.88 MPa·m^(1/2)),the Gd_(2)Zr_(2)O_(7)coating exhibits higher fracture toughness(1.74 MPa·m^(1/2))and stronger resistance to crack propagation.The prepared MoSi_(2)-Gd_(2)Zr_(2)O_(7)composite coatings have a high porosity(39%),low thermal conductivity(1.020 W·(m·K)^(−1),1200℃),and low thermal diffusivity(0.249 mm^(2)/s,1200℃).Additionally,they possess a high oxygen-vacancy concentration,which ensures excellent insulation performance.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金Project(52373065)supported by the National Natural Science Foundation of ChinaProject(2220004002898)supported by the Zhuhai Industry University Research Cooperation and Basic and Applied Research Projects,China。
文摘Waterborne acrylic coatings are widely utilized due to their cost-effectiveness,high transparency,strong resistance to weather and chemicals,impressive mechanical properties,and excellent adhesion to various substrates.In these coatings,a reactive emulsifier containing phosphate groups can be integrated into the molecular chain during polymerization,which enhances the coating's compactness and corrosion resistance.This work focuses on the synthesis of styrene-butyl acrylate(St-BA)latex and methyl methacrylate-butyl acrylate(MMA-BA)latex using the reactive phosphate emulsifier ANPEO_(10)-P_(1) through seed emulsion polymerization,achieving a conversion rate of approximately 99%and a solid content close to 50%.The resulting coatings from St-BA and MMA-BA latexes demonstrated long-term corrosion protection for carbon steel and aluminum alloy due to in-situ phosphatization,effectively preventing flash rust.Notably,the MMA-BA coating exhibited remarkable durability,enduring immersion for up to 1224 h(51 d)on Q 235 carbon steel before reaching the failure threshold(|Z|0.01 Hz£106Ω·cm^(2))on Q 235 carbon steel.On 5052 aluminum alloy,the St-BA coating maintained|Z|0.01 Hz>10^(8)Ω·cm^(2) for 480 h(20 d).Furthermore,the corrosion resistance of St-BA and MMA BA coatings on Q 235 steel sheet and 5052 aluminum alloy surpassed that of commercially available MMA-BA and St BA coatings after immersion in a 3.5 wt%NaCl aqueous solution.This work also delves into the anticorrosion mechanism of MMA-BA and St-BA coatings.
基金supported by the National Natural Science Foundation of China(Nos.52105330,52175307)the Natural Science Foundation of Shandong Province,China(No.ZR2023JQ021)。
文摘The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.
基金supported by the National Natural Science Foundation of China(Grant Nos.52302115,52231004)。
文摘Hafnium carbide(HfC)serves as a critical ablation-resistant coating for C/C composites used on the wing leading edges of high-speed vehicles during atmospheric re-entry[1-3].Under the action of high-temperature,oxidizing gas flow,the HfC coating forms a high-melting-point heterogeneous oxide layer,significantly delaying oxidation of the underlying material and preserving the structural integrity of the C/C composites[4].
文摘Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicrobial,chemical durability,electrical insulation,and UV aging features.Due to their widely anticipation in petroleum,applications in building,conveyance,aerospace,electronics,automobiles and energy,these multi-functional coatings have a tremendous leverage in human life,all technological and scientific subjects.Numerous applications have been made for multilateral polymers like polyurethane(PU),epoxy(EP),polyaniline(PANI)conductive polymer,polypyrrole(PPy),and etc,on various metallic surfaces especially,carbon steel substrate owing to their excellent resistance properties.Practically,nanomaterials can possess potential in the all-interdisciplinary domains of materials science and engineering,chemical and physical sciences,biological and health sciences.As known,the designed polymer nanocomposite coating paradigm is fundamentally constituted from polymer or resin as a vehicle and inorganic nanofillers(nanoparticles and nanocomposites).Some commercialized and excessively employed nanocontainers in polymer nanocomposite coating formulations,like ZnO,TiO_(2),carbon nanotubes(CNTs),clay,SiO_(2),Al_(2)O_(3),graphene,GO,CeO_(2),ZrO_(2),FeTiO_(3),etc were discussed.The current review covered the chemistry and potential applications of the largest utilized multifunctional polymer nanocomposite coatings such as EP,PU and other considerable PNCCs.Lately,a titanic attention was made for epoxy nanocomposites because of their distinct physicochemical characteristics,which result from the combined qualities of the nanoparticles and polymer material unity.In addition,the author incorporated some of his scientific contributions in this area represented in construction of innovative functional polymer nanocomposites for a variety of uses with high economic,industrial impacts and future orientation.Furthermore,some newly published applications of polymer nanocomposite coatings were incorporated and discussed.
基金financially supported by the National Natural Science Foundation of China(No.52371049)the Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(YESS,No.2020QNRC001)the National Science and Technology Resources Investigation Program of China(Nos.2021FY100603 and 2019FY101404)。
文摘The atmospheric corrosion monitoring(ACM)technique has been widely employed to track the real-time corrosion behavior of metal materials.However,limited studies have applied ACM to the corrosion protection properties of organic coatings.This study compared a bare epoxy coating with one containing zinc phosphate corrosion inhibitors,both applied on ACM sensors,to observe their corrosion protection properties over time.Coatings with artificial damage via scratches were exposed to immersion and alternating dry and wet environments,which allowed for monitoring galvanic corrosion currents in real-time.Throughout the corrosion tests,the ACM currents of the zinc phosphate/epoxy coating were considerably lower than those of the blank epoxy coating.The trend in ACM current variations closely matched the results obtained from regular electrochemical tests and surface analysis.This alignment highlights the potential of the ACM technique in evaluating the corrosion protection capabilities of organic coatings.Compared with the blank epoxy coating,the zinc phosphate/epoxy coating showed much-decreased ACM current values that confirmed the effective inhibition of zinc phosphate against steel corrosion beneath the damaged coating.
基金Sichuan Science and Technology Program(2022YFSY0018)。
文摘TC4 micro-arc oxidation(MAO)coatings were prepared by adding SiO_(2) nanoparticles or sodium silicate to the sodium meta-aluminate-based electrolyte.The effect of additives was investigated by XRD,SEM,EDS,electrochemical and wear tests.The results show that additives can considerably accelerate the formation of MAO coatings.The coatings are mostly composed of rutile and anatase TiO_(2),α-Al_(2)O_(3),γ-Al_(2)O_(3),Al_(2)TiO_(5) and SiO_(2).Sodium silicate and SiO_(2) nanoparticles added to the coating can effectively reduce the size of micropores and increase its thickness,whereas SiO_(2) nanoparticles with superior physical properties can be directly deposited at the discharge channel,significantly increasing the coating's resistance to wear and corrosion.The coating with SiO_(2) nanoparticles exhibits the best overall performance,with the lowest corrosion rate and average friction coefficient of 4.095×10^(-5)mm/a and 0.30,respectively.
基金supported by the National Key Re-search and Development Program of China(No.2022YFB4002100)the National Natural Science Foundation of China(No.52271136)the Natural Science Foundation of Shaanxi Province(Nos.2019TD-020 and 2021JC-06).
文摘Proton exchange membrane water electrolysis(PEMWE)is one of the most promising strategies to pro-duce green hydrogen energy,and it is crucial to exploit highly conductive and good corrosion-resistant coatings on bipolar plates(BPs),one of the core components in PEMWE cells.In this work,NbN coatings are deposited on Ti BPs by magnetron sputtering to improve the corrosion resistance and conductivity,for which the critical process parameters,such as the working pressure,partial nitrogen pressure and de-position temperature are well optimized.It is found that the compact microstructure,highly conductive δ-NbN and uniform nanoparticles play a dominant role in the synergistic improvement of the corrosion resistance and electrical conductivity of NbN coatings.The optimized NbN coatings exhibit excellent cor-rosion resistance with the low corrosion current density of 1.1×10^(-8) A cm^(-2),a high potential value of-0.005 V vs.SCE and a low ICR value of 15.8 mΩcm2@1.5 MPa.Accordingly,NbN coatings can be a promising candidate for the development of the low-cost and high-anti-corrosion Ti BPs of PEMWE.
基金National Natural Science Foundation of China(52071126)Natural Science Foundation of Tianjin City,China(22JCQNJC01240)+2 种基金Central Guidance on Local Science and Technology Development Fund of Hebei Province(226Z1009G)Special Funds for Science and Technology Innovation in Hebei(2022X19)Anhui Provincial Natural Science Foundation(2308085ME135)。
文摘Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.
基金financially supported by the National Natural Science Foundation of China(Nos.52371088,52071347,and U20A20233)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515240007)Shenzhen Science and Technology Program(No.KJZD20230923114819041).
文摘Corrosion activities and related accidents are significant issues for marine facilities,leading to considerable economic losses.Waterborne epoxy(EP)coating has been seen as one of the optimal options for corrosion protection due to its stable properties and eco-friendliness(0 g/L volatile organic compounds).Nevertheless,several intrinsic deficiencies require improvement,such as fragile mechanical properties and defects(macro and micro),resulting in the continuous deterioration of comprehensive coating performances.In this work,a novel nanocomposite coating with mechanical enhancement,intelligent self-reporting,and active protection is fabricated by integrating the functionalized and compatible graphene oxide/cerium based metal-organic framework multiscale structure(GO-CeMOF-P/M).Notably,the homogenous dispersion of GO-CeMOF-P/M and its chemical interaction with the polymer matrix effectively reduces the defects resulting from solution volatilizing and enhances the compactness,which boosts the tensile strength(32.1 MPa/8.5%)and dry adhesion force(5.8 MPa)of the coating.Additionally,the controllable responsiveness and release of multiscale nanocomposite within external environments endow intelligent active protection and self-reporting characteristics for the GO-CeMOF-P/M-EP coating,making it especially suitable for a variety of practical marine applications.Furthermore,following immersion of 80 d in the aggressive environment,Zf=0.01 Hz value of GO-CeMOF-P/M-EP coating is 1.2×10^(10)Ωcm^(2),which is 164.4 times larger than that of EP coating(7.3×10^(7)Ωcm^(2)),demonstrating remarkably strengthened anti-corrosion ability.Consequently,by offering an intriguing design strategy,the current work anticipates addressing the inherent deficiencies of EP coating and facilitating its practicality and feasibility in real sea environments.
基金supported by the National Key R&D Program of China(No.2022YFB3808803)the National Natural Science Foundation of China(No.52371049)the National Science and Technology Resources Investigation Program of China(No.2021FY100603).
文摘The corrosion degradation of organic coatings in tropical marine atmospheric environments results in substantial economic losses across various industries.The complexity of a dynamic environment,combined with high costs,extended experimental periods,and limited data,places a limit on the comprehension of this process.This study addresses this challenge by investigating the corrosion de-gradation of damaged organic coatings in a tropical marine environment using an atmospheric corrosion monitoring sensor and a random forest(RF)model.For damage simulation,a polyurethane coating applied to a Fe/graphite corrosion sensor was intentionally scratched and exposed to the marine atmosphere for over one year.Pearson correlation analysis was performed for the collection and filtering of en-vironmental and corrosion current data.According to the RF model,the following specific conditions contributed to accelerated degrada-tion:relative humidity(RH)above 80%and temperatures below 22.5℃,with the risk increasing significantly when RH exceeded 90%.High RH and temperature exhibited a cumulative effect on coating degradation.A high risk of corrosion occurred in the nighttime.The RF model was also used to predict the coating degradation process using environmental data as input parameters,with the accuracy show-ing improvement when the duration of influential environmental ranges was considered.
基金supported by the National Key R&D Pro-gram of China(Grant No.2021YFA0715803)the National Natural Science Foundation of China(Grant Nos.52293373,52130205,and 52302091)+1 种基金the Joint Fund of Henan Province Science and Technol-ogy R&D Program(No.225200810002)the ND Basic Research Funds of Northwestern Polytechnical University(No.G2022WD).
文摘Multicomponent(Hf-Zr-Ta)B_(2)potentially provides improved ablation resistance compared with silicon-based ceramics.Here we deposited(Hf_(0.5-x/2)Zr_(0.5-x/2)Ta_(x))B_(2)(x=0,0.1,and 0.2)coatings onto C/C com-posites,and investigated their ablation behaviors under an oxyacetylene torch with a heat flux of 2.4 MW m^(-2).It was observed that the x=0.1 oxide scale bulged but was denser,and the x=0.2 oxide scale was blown away due to the formation of excessive liquid.Based on these findings,we further de-veloped a duplex(Hf-Zr-Ta)B_(2)coating that showed a linear recession rate close to zero(0.11μm s^(-1))after two 120-s ablation cycles.It is identified that the resulting oxide scale is mainly composed of(Hf,Zr)_(6)Ta_(2)O_(17)and(Hf,Zr,Ta)O_(2)by performing aberration-corrected(scanning)transmission electron microscopy.The protective mechanism is related to the peritectic transformation of orthorhombic-(Hf,Zr)_(6)Ta_(2)O_(17)to tetragonal-(Hf,Zr,Ta)O_(2)plus Ta-dominated liquid.This study contributes to the develop-ment of Ta-containing multicomponent UHTC bulk and coatings for ultra-high temperature applications.
