Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising techn...Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.展开更多
This study sheds light on how pore structure characteristics and varying dynamic pressure conditions influence the permeability of tight sandstone reservoirs,with a particular focus on the Paleozoic reservoirs in the ...This study sheds light on how pore structure characteristics and varying dynamic pressure conditions influence the permeability of tight sandstone reservoirs,with a particular focus on the Paleozoic reservoirs in the Qingshimao Gas Field.Using CT scans of natural core samples,a three-dimensional digital core was constructed.The maximum ball method was applied to extract a related pore network model,and the pore structure characteristics of the core samples,such as pore radius,throat radius,pore volume,and coordination number,were quantitatively evaluated.The analysis revealed a normally distributed pore radius,suggesting a high degree of reservoir homogeneity and favorable conditions for a connected pore system.However,it was found that the majority of throat radii measured less than 1μm,which severely restricted fluid flow and diminished permeability.Over 50%of the pores measured under 100μm^(3),further constraining fluid movement.Additionally,30%-50%of the pore network was composed of isolated and blind-end pores,which significantly impaired formation connectivity and reduced permeability.Based on this,the lattice Boltzmann method(LBM)was used for pore-scale flow simulation to investigate the influence mechanism of pore structure characteristics and dynamic-static parameters such as displacement pressure difference on the permeability performance of the considered tight sandstone reservoirs for various pressure gradients(0.1,1,and 10 MPa).The simulations revealed a strong relationship between pressure differential and both the number of streamlines and flow path tortuosity.When the pressure differential increased to 1 MPa,30 streamlines were observed,with a tortuosity factor of 1.5,indicating the opening of additional seepage channels and the creation of increasingly winding flow paths.展开更多
Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for mach...Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for machining difficult-to-cut materials through Computer Numerical Control(CNC)trajectory motion.Using a tilted large cathode machining surface and the cut-in feed mode,an efficient and low-cost method is obtained for machining the large integral components.A novel crossed and inclined structure of the flow mode is designed to realize electrochemical milling with a large tilted cathode surface.Compared to the vertical flow mode with one inlet,the proposed flow mode has two inlets that independently supply electrolytes,and the inclined channels make the flow field more stable.Flow field simulations are performed for both the vertical and proposed flow modes.The results show that the proposed flow mode avoids the random diversion of electrolytes and the ultralow flow velocity at both ends of the nozzle area,improving the velocity,uniformity,and stability of the electrolytes.The inclination angle of the crossed and inclined flow field is optimized.Finally,limit feed rate experiments are conducted in two modes,and the limit feed rate is 70 mm/min in the proposed mode.A sector workpiece of a large circular surface with approximately 8.77 mm thickness is machined 9 times by the cut-in electrochemical milling,the material removal rate is 4872 mm^(3)/min,and the surface roughness is superior to 1.15μm.展开更多
Radial jet drilling(RJD)technology is expected to be a technology for the efficient exploitation of geothermal resources.However,the low rock-breaking efficiency is the major obstacle hindering the development of RJD ...Radial jet drilling(RJD)technology is expected to be a technology for the efficient exploitation of geothermal resources.However,the low rock-breaking efficiency is the major obstacle hindering the development of RJD technology.The flow field characteristics and rock breaking ability of cone-straight abrasive jet,rotary abrasive jet,and straight-rotating mixed abrasive jet are analyzed by numerical simulations and experiments.Results show that the axial velocity of the cone-straight abrasive jet is high,the tangential velocity is basically zero,the radial velocity is also small,and the jet impact area is concentrated in the center.A deep hole with a diameter of only 25 mm is formed when the cone-straight abrasive jet breaks the granite.Due to the presence of the guiding impeller,the rotary abrasive jet basically has no axial velocity and has the highest tangential and radial velocity,so it can break the granite to form a hole with a diameter of about 55 mm and a central bulge.The straight-rotating mixed abrasive jet has a large axial/tangential/radial velocity at the same time,so it can break the granite to form a hole with a diameter of about 52 mm with a low bulge.The results show that the straight-rotating mixed abrasive jet combines the advantages of the cone-straight jet and the rotary jet,and is more suitable for the RJD technology.The research results can provide reference for the development of efficient rock-breaking and hole-forming technology,and promote the development of RJD technology in the field of geothermal development.展开更多
Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regu...Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.展开更多
Phosphorus recovery in the form of struvite has been aroused in recent decades for its dual advantages in eutrophication control and resource protection.The usage of the struvite products is normally determined by the...Phosphorus recovery in the form of struvite has been aroused in recent decades for its dual advantages in eutrophication control and resource protection.The usage of the struvite products is normally determined by the size which is largely depended on the hydrodynamics.In this study,flow behavior of struvite pellets was simulated by means of Eulerian–Eulerian two-fluid model combining with kinetic theory of granular flow in a liquid–solid fluidized bed reactor（FBR）.A parametric study including the mesh size,time step,discretization strategy,turbulent model and drag model was first developed,followed by the evaluations of crucial operational conditions,particle characteristics and reactor shapes.The results showed that a cold model with the mesh resolution of 16 × 240,default time step of 0.001 sec and first order discretization scheme was accurate enough to describe the fluidization.The struvite holdup profile using Syamlal–O＇Brien drag model was best fitted to the experimental data as compared with other drag models and the empirical Richardson–Zaki equation.Regarding the model evaluation,it showed that liquid velocity and particle size played important roles on both solid holdups and velocities.The reactor diameter only influenced the solid velocity while the static bed height almost took no effect.These results are direct and can be applied to guide the operation and process control of the struvite fluidization.Moreover,the model parameters can also be used as the basic settings in further crystallization simulations.展开更多
Effective management of a river reach requires a sound understanding of flow and sediment transport generated by varying natural and artificial runoff conditions. Flow and sediment transport within the Ning-Meng reach...Effective management of a river reach requires a sound understanding of flow and sediment transport generated by varying natural and artificial runoff conditions. Flow and sediment transport within the Ning-Meng reach of the Yellow River（NMRYR）, northern China are controlled by a complex set of factors/processes, mainly including four sets of factors：（1） aeolian sediments from deserts bordering the main stream;（2） inflow of water and sediment from numerous tributaries;（3） impoundment of water by reservoir/hydro-junction; and（4） complex diversion and return of irrigation water. In this study, the 1-D flow ＆ sediment transport model developed by the Yellow River Institute of Hydraulic Research was used to simulate the flow and sediment transport within the NMRYR from 2001 to 2012. All four sets of factors that primarily control the flow and sediment transport mentioned above were considered in this model. Compared to the measured data collected from the hydrological stations along the NMRYR, the simulated flow and sediment transport values were generally acceptable, with relative mean deviation between measured and simulated values of 〈15%. However, simulated sediment concentration and siltation values within two sub-reaches（i.e., Qingtongxia Reservoir to Bayan Gol Hydrological Station and Bayan Gol Hydrological Station to Toudaoguai Hydrological Station） for some periods exhibited relatively large errors（the relative mean deviations between measured and simulated values of 18% and 25%, respectively）. These errors are presumably related to the inability to accurately determine the quantity of aeolian sediment influx to the river reach and the inflow of water from the ten ephemeral tributaries. This study may provide some valuable insights into the numerical simulations of flow and sediment transport in large watersheds and also provide a useful model for the effective management of the NMRYR.展开更多
Based on the Navier-Stokes equations and the Spalart-Allmaras turbulence model, three-dimensional turbulent flow in four low-specific-speed centrifugal impellers are simulated numerically and analyzed. The relativ...Based on the Navier-Stokes equations and the Spalart-Allmaras turbulence model, three-dimensional turbulent flow in four low-specific-speed centrifugal impellers are simulated numerically and analyzed. The relative velocity distribution, pressure distribution and static pressure rise at the design point are obtained for the regular impeller with only long blades and three complex impellers with long, mid or short blades. It is found that the back flow region between long-blade pressure side and mid-blade suction side is diminished and is pushed to pressure side of short blades near the outlet of impeller at suction side by the introduction of mid, short blades, and the size of back flow becomes smaller in a multi-blade complex impeller. And the pressure rises uniformly from inlet to outlet in all the impellers. The simulated results show that the complex impeller with long, mid and short blades can improve the velocity distribution and reduce the back flow in the impeller channel. The experimental results show that the back flow in the impeller has an important influence on the performance of pump and a more-blade complex impeller with long, mid and short blades can effectively solve low flow rate instability of the low-specific-speed centrifugal pump.展开更多
Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
The three-dimensional(3 D) structures of pores directly affect the CH4 flow.Therefore,it is very important to analyze the3 D spatial structure of pores and to simulate the CH4 flow with the connected pores as the carr...The three-dimensional(3 D) structures of pores directly affect the CH4 flow.Therefore,it is very important to analyze the3 D spatial structure of pores and to simulate the CH4 flow with the connected pores as the carrier.The result shows that the equivalent radius of pores and throats are 1-16 μm and 1.03-8.9 μm,respectively,and the throat length is 3.28-231.25 μm.The coordination number of pores concentrates around three,and the intersection point between the connectivity function and the X-axis is 3-4 μm,which indicate the macro-pores have good connectivity.During the single-channel flow,the pressure decreases along the direction of CH4 flow,and the flow velocity of CH4 decreases from the pore center to the wall.Under the dual-channel and the multi-channel flows,the pressure also decreases along the CH4 flow direction,while the velocity increases.The mean flow pressure gradually decreases with the increase of the distance from the inlet slice.The change of mean flow pressure is relatively stable in the direction horizontal to the bedding plane,while it is relatively large in the direction perpendicular to the bedding plane.The mean flow velocity in the direction horizontal to the bedding plane(Y-axis) is the largest,followed by that in the direction horizontal to the bedding plane(X-axis),and the mean flow velocity in the direction perpendicular to the bedding plane is the smallest.展开更多
There is a relatively complex flow state inside the high speed on-off valve,which often produces low pressure area and oil reflux in the high-speed opening and closing process of the spool,causing cavitation and vorte...There is a relatively complex flow state inside the high speed on-off valve,which often produces low pressure area and oil reflux in the high-speed opening and closing process of the spool,causing cavitation and vortex and other phenomena.These phenomena will affect the stability of the internal flow field of the plate valve and the flow characteristics of the high speed on-off valve.Aiming at the problems of small flow rate and instability of internal flow field,a new spool structure was designed.The flow field models of two-hole and three-hole plate spools with different openings were established,and software ANSYS Workbench was chosen to mesh the model.The standard k−εturbulence model was selected for numerical simulation using FLUENT software.The pressure distribution and velocity distribution under the same pressure and different opening degree were obtained.The structure and parameters of the optimization model were also obtained.The stability analysis of flow field under different pressure was carried out.The results demonstrate that the three-hole spool has a similar flow field change with the two-hole spool,but it does not create a low pressure zone,and the three-hole spool can work stably at 2 MPa or less.This method improves the appearance of low pressure area and oil backflow in the process of high speed opening and closing of spool.The stability of flow field and the flow rate of high speed switch valve are improved.Finally,the products designed in this paper are compared with existing hydraulic valve products.The results show that the three-hole plate type high speed on-off valve designed in this paper maintains the stability of the internal flow field under the condition of 200 Hz and large opening degree,and realizes the increase of flow rate.展开更多
A three-dimensional turbulent flow through an entire centrifugal pump is simulated using k-ε turbulence model modified by rotation and curvature, SIMPLEC method and body-fitted coordinate. The velocity and pressure f...A three-dimensional turbulent flow through an entire centrifugal pump is simulated using k-ε turbulence model modified by rotation and curvature, SIMPLEC method and body-fitted coordinate. The velocity and pressure fields are obtained for the pump under various working conditions, which is used to predict the head and hydraulic efficiency of the pump, and the results correspond well with the measured values. The calculation results indicate that the pressure is higher on the pressure side than that on the suction side of the blade; The relative velocity on the suction side gradually decreases from the impeller inlet to the outlet, while increases on the pressure side, it finally results in the lower relative velocity on the suction side and the higher one on the pressure side at the impeller outlet; The impeller flow field is asymmetric, i.e. the velocity and pressure fields arc totally different among all channels in the impeller; In the volute, the static pressure gradually increases with the flow route, and a large pressure gratitude occurs in the tongue; Secondary flow exists in the rear part of the spiral.展开更多
The flow field over Hainan Island and the Leizhou Peninsula in summer and winter is discussed with three-dimensional mesoscale model developed in the University of Virginia and using the representative meteorological ...The flow field over Hainan Island and the Leizhou Peninsula in summer and winter is discussed with three-dimensional mesoscale model developed in the University of Virginia and using the representative meteorological data of January and July.Simulation results indicate that the local weather characteristics over the Hainan Island are distinctly influenced by theWuzhi Mountain terrain. The cloudy or rainfall weather over the northeast of the Wuzhi Mountain occurs easily, under proper large-scale conditions of flow, temperature and humidity. while west wind prevails. The overcast or rainfall weather is often induced by strong convection in the afternoon over west of the Hainan Island under easterly prevailing wind.展开更多
The uncertainty quantification of flows around a cylinder is studied by the non-intrusive polynomial chaos method. Based on the validation with benchmark results, discussions are mainly focused on the statistic proper...The uncertainty quantification of flows around a cylinder is studied by the non-intrusive polynomial chaos method. Based on the validation with benchmark results, discussions are mainly focused on the statistic properties of the peak lift and drag coefficients and base pressure drop over the cylinder with the uncertainties of viscosity coefficient and inflow boundary velocity. As for the numerical results of flows around a cylinder, influence of the inflow boundary velocity uncertainty is larger than that of viscosity. The results indeed demonstrate that a five-order degree of polynomial chaos expansion is enough to represent the solution of flow in this study.展开更多
Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster managem...Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.展开更多
基金the National Natural Science Foundation of China(No.52205468)China Postdoctoral Science Foundation(No.2022M710061 and No.2023T160277)Natural Science Foundation of Jiangsu Province(No.BK20210755)。
文摘Large size titanium alloy parts are widely used in aerospace.However,they are difficult to manufacture using mechanical cutting technology because of severe tool wear.Electrochemical jet machining is a promising technology to achieve high efficiency,because it has high machining flexibility and no machining tool wear.However,reports on the macro electrochemical jet machining of large size titanium alloy parts are very scarce,because it is difficult to achieve effective constraint of the flow field in macro electrochemical jet machining.In addition,titanium alloy is very sensitive to fluctuation of the flow field,and a turbulent flow field would lead to serious stray corrosion.This paper reports a series of investigations of the electrochemical jet machining of titanium alloy parts.Based on the flow analysis and experiments,the machining flow field was effectively constrained.TB6 titanium alloy part with a perimeter of one meter was machined.The machined surface was smooth with no obvious machining defects.The machining process was particularly stable with no obvious spark discharge.The research provides a reference for the application of electrochemical jet machining technology to achieve large allowance material removal in the machining of large titanium alloy parts.
文摘This study sheds light on how pore structure characteristics and varying dynamic pressure conditions influence the permeability of tight sandstone reservoirs,with a particular focus on the Paleozoic reservoirs in the Qingshimao Gas Field.Using CT scans of natural core samples,a three-dimensional digital core was constructed.The maximum ball method was applied to extract a related pore network model,and the pore structure characteristics of the core samples,such as pore radius,throat radius,pore volume,and coordination number,were quantitatively evaluated.The analysis revealed a normally distributed pore radius,suggesting a high degree of reservoir homogeneity and favorable conditions for a connected pore system.However,it was found that the majority of throat radii measured less than 1μm,which severely restricted fluid flow and diminished permeability.Over 50%of the pores measured under 100μm^(3),further constraining fluid movement.Additionally,30%-50%of the pore network was composed of isolated and blind-end pores,which significantly impaired formation connectivity and reduced permeability.Based on this,the lattice Boltzmann method(LBM)was used for pore-scale flow simulation to investigate the influence mechanism of pore structure characteristics and dynamic-static parameters such as displacement pressure difference on the permeability performance of the considered tight sandstone reservoirs for various pressure gradients(0.1,1,and 10 MPa).The simulations revealed a strong relationship between pressure differential and both the number of streamlines and flow path tortuosity.When the pressure differential increased to 1 MPa,30 streamlines were observed,with a tortuosity factor of 1.5,indicating the opening of additional seepage channels and the creation of increasingly winding flow paths.
基金co-supported by National Natural Science Foundation of China(No.52075253)National Natural Science Foundation of China for Creative Research Groups(No.51921003).
文摘Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for machining difficult-to-cut materials through Computer Numerical Control(CNC)trajectory motion.Using a tilted large cathode machining surface and the cut-in feed mode,an efficient and low-cost method is obtained for machining the large integral components.A novel crossed and inclined structure of the flow mode is designed to realize electrochemical milling with a large tilted cathode surface.Compared to the vertical flow mode with one inlet,the proposed flow mode has two inlets that independently supply electrolytes,and the inclined channels make the flow field more stable.Flow field simulations are performed for both the vertical and proposed flow modes.The results show that the proposed flow mode avoids the random diversion of electrolytes and the ultralow flow velocity at both ends of the nozzle area,improving the velocity,uniformity,and stability of the electrolytes.The inclination angle of the crossed and inclined flow field is optimized.Finally,limit feed rate experiments are conducted in two modes,and the limit feed rate is 70 mm/min in the proposed mode.A sector workpiece of a large circular surface with approximately 8.77 mm thickness is machined 9 times by the cut-in electrochemical milling,the material removal rate is 4872 mm^(3)/min,and the surface roughness is superior to 1.15μm.
基金funded by the National Natural Science Foundation of China(No.52374018)Science Foundation of China University of Petroleum,Beijing(No.2462021YJRC009)。
文摘Radial jet drilling(RJD)technology is expected to be a technology for the efficient exploitation of geothermal resources.However,the low rock-breaking efficiency is the major obstacle hindering the development of RJD technology.The flow field characteristics and rock breaking ability of cone-straight abrasive jet,rotary abrasive jet,and straight-rotating mixed abrasive jet are analyzed by numerical simulations and experiments.Results show that the axial velocity of the cone-straight abrasive jet is high,the tangential velocity is basically zero,the radial velocity is also small,and the jet impact area is concentrated in the center.A deep hole with a diameter of only 25 mm is formed when the cone-straight abrasive jet breaks the granite.Due to the presence of the guiding impeller,the rotary abrasive jet basically has no axial velocity and has the highest tangential and radial velocity,so it can break the granite to form a hole with a diameter of about 55 mm and a central bulge.The straight-rotating mixed abrasive jet has a large axial/tangential/radial velocity at the same time,so it can break the granite to form a hole with a diameter of about 52 mm with a low bulge.The results show that the straight-rotating mixed abrasive jet combines the advantages of the cone-straight jet and the rotary jet,and is more suitable for the RJD technology.The research results can provide reference for the development of efficient rock-breaking and hole-forming technology,and promote the development of RJD technology in the field of geothermal development.
基金sponsored by the National Natural Science Foundation of China(Grant No.12002173,12262027)Research start-up project of Inner Mongolia University of Technology(No.2200000924)key Lab.of University of Geological Hazards and Geotechnical Engineering Defense in Sandy and Drought Regions,Inner Mongolia Autonomous.
文摘Microbially induced calcium carbonate precipitation(MICP)technology can induce calcium carbonate crystals with cementation and stable performance in the process of microbial metabolism or enzymization through the regulation of environmental factors MICP can be used as a cementing agent to cement cohesionless sand particles to form the materials with the characteristics of higher strength,better durability and environmental friendli-ness,as well as a good engineering application prospect.In this paper,the shear strength of sand column was tested by triaxial compression tests,and the strength index was obtained.In order to further study the micro-strength mechanism and the failure process,based on the discrete element method,a numerical model of MICP cemented sand column was established considering the factors of matrix soil particle gradation,particle mor-phology,content ratio of induced calcium carbonate,pore distribution characteristics,inter-particle cementation and so on.The failure process of MICP cemented sand column under load was analysed by numerical simulation,and the reliability of the numerical model was tested by combining with the stress intensity curve of samples under test conditions.The results indicate that compared with the actual triaxial tests of MICP cemented sand column,although there are deviations in stress and strain,cohesion and internal friction angle,the numerical simulation shows similar development law and intensity amplitude,and the same failure trend.The work in this paper verifies the reliability of the numerical model and provides a theoretical basis for the subsequent analysis of the factors influencing the geotechnical mechanical properties of biomineralized materials.
基金supported by the Young Scientists Frontier Foundation of Institute of Urban Environment,Chinese Academy of Sciences(No.IUEQN201501)the National Natural Science Foundation of China(No.51608503)
文摘Phosphorus recovery in the form of struvite has been aroused in recent decades for its dual advantages in eutrophication control and resource protection.The usage of the struvite products is normally determined by the size which is largely depended on the hydrodynamics.In this study,flow behavior of struvite pellets was simulated by means of Eulerian–Eulerian two-fluid model combining with kinetic theory of granular flow in a liquid–solid fluidized bed reactor（FBR）.A parametric study including the mesh size,time step,discretization strategy,turbulent model and drag model was first developed,followed by the evaluations of crucial operational conditions,particle characteristics and reactor shapes.The results showed that a cold model with the mesh resolution of 16 × 240,default time step of 0.001 sec and first order discretization scheme was accurate enough to describe the fluidization.The struvite holdup profile using Syamlal–O＇Brien drag model was best fitted to the experimental data as compared with other drag models and the empirical Richardson–Zaki equation.Regarding the model evaluation,it showed that liquid velocity and particle size played important roles on both solid holdups and velocities.The reactor diameter only influenced the solid velocity while the static bed height almost took no effect.These results are direct and can be applied to guide the operation and process control of the struvite fluidization.Moreover,the model parameters can also be used as the basic settings in further crystallization simulations.
基金financially supported by the National Natural Science Foundation of China(51579113,51309111,51309113)
文摘Effective management of a river reach requires a sound understanding of flow and sediment transport generated by varying natural and artificial runoff conditions. Flow and sediment transport within the Ning-Meng reach of the Yellow River（NMRYR）, northern China are controlled by a complex set of factors/processes, mainly including four sets of factors：（1） aeolian sediments from deserts bordering the main stream;（2） inflow of water and sediment from numerous tributaries;（3） impoundment of water by reservoir/hydro-junction; and（4） complex diversion and return of irrigation water. In this study, the 1-D flow ＆ sediment transport model developed by the Yellow River Institute of Hydraulic Research was used to simulate the flow and sediment transport within the NMRYR from 2001 to 2012. All four sets of factors that primarily control the flow and sediment transport mentioned above were considered in this model. Compared to the measured data collected from the hydrological stations along the NMRYR, the simulated flow and sediment transport values were generally acceptable, with relative mean deviation between measured and simulated values of 〈15%. However, simulated sediment concentration and siltation values within two sub-reaches（i.e., Qingtongxia Reservoir to Bayan Gol Hydrological Station and Bayan Gol Hydrological Station to Toudaoguai Hydrological Station） for some periods exhibited relatively large errors（the relative mean deviations between measured and simulated values of 18% and 25%, respectively）. These errors are presumably related to the inability to accurately determine the quantity of aeolian sediment influx to the river reach and the inflow of water from the ten ephemeral tributaries. This study may provide some valuable insights into the numerical simulations of flow and sediment transport in large watersheds and also provide a useful model for the effective management of the NMRYR.
基金the National Natural Science Foundation of China （No.50576088）, the Natural Science Foundation of Zhejiang Province （No.R503170） and the Doctoral Program Foundation of Ministry of Education （No.20030335009）.
文摘Based on the Navier-Stokes equations and the Spalart-Allmaras turbulence model, three-dimensional turbulent flow in four low-specific-speed centrifugal impellers are simulated numerically and analyzed. The relative velocity distribution, pressure distribution and static pressure rise at the design point are obtained for the regular impeller with only long blades and three complex impellers with long, mid or short blades. It is found that the back flow region between long-blade pressure side and mid-blade suction side is diminished and is pushed to pressure side of short blades near the outlet of impeller at suction side by the introduction of mid, short blades, and the size of back flow becomes smaller in a multi-blade complex impeller. And the pressure rises uniformly from inlet to outlet in all the impellers. The simulated results show that the complex impeller with long, mid and short blades can improve the velocity distribution and reduce the back flow in the impeller channel. The experimental results show that the back flow in the impeller has an important influence on the performance of pump and a more-blade complex impeller with long, mid and short blades can effectively solve low flow rate instability of the low-specific-speed centrifugal pump.
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
基金financially supported by the National Key Research and Development Plan(No.2018YFB0605601)the National Natural Science Foundation of China(No.41972168)。
文摘The three-dimensional(3 D) structures of pores directly affect the CH4 flow.Therefore,it is very important to analyze the3 D spatial structure of pores and to simulate the CH4 flow with the connected pores as the carrier.The result shows that the equivalent radius of pores and throats are 1-16 μm and 1.03-8.9 μm,respectively,and the throat length is 3.28-231.25 μm.The coordination number of pores concentrates around three,and the intersection point between the connectivity function and the X-axis is 3-4 μm,which indicate the macro-pores have good connectivity.During the single-channel flow,the pressure decreases along the direction of CH4 flow,and the flow velocity of CH4 decreases from the pore center to the wall.Under the dual-channel and the multi-channel flows,the pressure also decreases along the CH4 flow direction,while the velocity increases.The mean flow pressure gradually decreases with the increase of the distance from the inlet slice.The change of mean flow pressure is relatively stable in the direction horizontal to the bedding plane,while it is relatively large in the direction perpendicular to the bedding plane.The mean flow velocity in the direction horizontal to the bedding plane(Y-axis) is the largest,followed by that in the direction horizontal to the bedding plane(X-axis),and the mean flow velocity in the direction perpendicular to the bedding plane is the smallest.
基金Project(51975164)supported by the National Natural Science Foundation of ChinaProject(201908230358)supported by the China Scholarship CouncilProject supported by the Fundamental Research Foundation for Universities of Heilongjiang Province,China。
文摘There is a relatively complex flow state inside the high speed on-off valve,which often produces low pressure area and oil reflux in the high-speed opening and closing process of the spool,causing cavitation and vortex and other phenomena.These phenomena will affect the stability of the internal flow field of the plate valve and the flow characteristics of the high speed on-off valve.Aiming at the problems of small flow rate and instability of internal flow field,a new spool structure was designed.The flow field models of two-hole and three-hole plate spools with different openings were established,and software ANSYS Workbench was chosen to mesh the model.The standard k−εturbulence model was selected for numerical simulation using FLUENT software.The pressure distribution and velocity distribution under the same pressure and different opening degree were obtained.The structure and parameters of the optimization model were also obtained.The stability analysis of flow field under different pressure was carried out.The results demonstrate that the three-hole spool has a similar flow field change with the two-hole spool,but it does not create a low pressure zone,and the three-hole spool can work stably at 2 MPa or less.This method improves the appearance of low pressure area and oil backflow in the process of high speed opening and closing of spool.The stability of flow field and the flow rate of high speed switch valve are improved.Finally,the products designed in this paper are compared with existing hydraulic valve products.The results show that the three-hole plate type high speed on-off valve designed in this paper maintains the stability of the internal flow field under the condition of 200 Hz and large opening degree,and realizes the increase of flow rate.
基金This project is supported by Provincial Natural Science Foundation of Jiangsu, China(No.BK2004406)Provincial Innovation Foundation for Graduate Students of Jiangsu, China(No.1223000053
文摘A three-dimensional turbulent flow through an entire centrifugal pump is simulated using k-ε turbulence model modified by rotation and curvature, SIMPLEC method and body-fitted coordinate. The velocity and pressure fields are obtained for the pump under various working conditions, which is used to predict the head and hydraulic efficiency of the pump, and the results correspond well with the measured values. The calculation results indicate that the pressure is higher on the pressure side than that on the suction side of the blade; The relative velocity on the suction side gradually decreases from the impeller inlet to the outlet, while increases on the pressure side, it finally results in the lower relative velocity on the suction side and the higher one on the pressure side at the impeller outlet; The impeller flow field is asymmetric, i.e. the velocity and pressure fields arc totally different among all channels in the impeller; In the volute, the static pressure gradually increases with the flow route, and a large pressure gratitude occurs in the tongue; Secondary flow exists in the rear part of the spiral.
文摘The flow field over Hainan Island and the Leizhou Peninsula in summer and winter is discussed with three-dimensional mesoscale model developed in the University of Virginia and using the representative meteorological data of January and July.Simulation results indicate that the local weather characteristics over the Hainan Island are distinctly influenced by theWuzhi Mountain terrain. The cloudy or rainfall weather over the northeast of the Wuzhi Mountain occurs easily, under proper large-scale conditions of flow, temperature and humidity. while west wind prevails. The overcast or rainfall weather is often induced by strong convection in the afternoon over west of the Hainan Island under easterly prevailing wind.
基金Supported by the National Natural Science Foundation of China under Grant No 11371069the Young Foundation of Institute of Applied Physics and Computational Mathematics under Grant No ZYSZ1518-13the Science Foundation of China Academy of Engineering Physics under Grant No 2013A0101004
文摘The uncertainty quantification of flows around a cylinder is studied by the non-intrusive polynomial chaos method. Based on the validation with benchmark results, discussions are mainly focused on the statistic properties of the peak lift and drag coefficients and base pressure drop over the cylinder with the uncertainties of viscosity coefficient and inflow boundary velocity. As for the numerical results of flows around a cylinder, influence of the inflow boundary velocity uncertainty is larger than that of viscosity. The results indeed demonstrate that a five-order degree of polynomial chaos expansion is enough to represent the solution of flow in this study.
基金financially supported by Department of Space,India(Grant No.ISRO/RES/4/663/18-19)。
文摘Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.
