A tunable diode laser absorption spectrometer （TDLAS） for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer （FT-IR） i...A tunable diode laser absorption spectrometer （TDLAS） for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer （FT-IR） in a simulation chamber.Formaldehyde was generated in situ in the chamber from reaction of ethene with ozone.Three HCHO ro-vibrational line intensities （at 2909.71,2912.09 and 2914.46 cm-1） possibly used by TDLAS were calibrated by FT-IR spectra simultaneously recorded in the 1600–3200 cm-1 domain during ethene ozonolysis,enabling the on-line deduction of the varying concentration for HCHO in formation.The experimental line intensities values inferred confirmed the calculated ones from the updated HITRAN database.In addition,the feasibility of stratospheric in situ HCHO measurements using the 2912.09 cm-1 line was demonstrated.The TDLAS performances were also assessed,leading to a 2σ detection limit of 88 ppt in volume mixing ratio with a response time of 60 sec at 30 Torr and 294 K for 112 m optical path.As part of this work,the room-temperature rate constant of this reaction and the HCHO formation yield were found to be in excellent agreement with the compiled literature data.展开更多
Introduction:This study aimed to establish a new predictive model for indoor radon concentrations.Methods:We constructed a radon experimental model using prefabricated block walls and measured surface radon exhalation...Introduction:This study aimed to establish a new predictive model for indoor radon concentrations.Methods:We constructed a radon experimental model using prefabricated block walls and measured surface radon exhalation rates across multi-layer walls.The geometric parameters of various building envelopes(walls,floors,and roofs)were incorporated to calculate indoor radon concentrations from each source.Natural ventilation rates were also considered in developing the indoor radon concentration prediction model.Results:Using closed-loop measurements,we determined the surface radon exhalation rates of prefabricated block walls and established fitting functions for multiple walls under varying temperatures and thicknesses.Based on indoor geometric parameters and natural ventilation rates,we developed a comprehensive prediction model for indoor radon concentrations.The model accurately predicted indoor equilibrium radon concentrations from prefabricated walls(thickness 0.155–0.268 m)at 23℃,with deviations less than 10%from measured values within ventilation rates of 0.115±0.015/h.Conclusions:This scientifically rigorous and practical approach to predicting radon concentration,based on building composition and measurements of radon exhalation rates,enables proactive assessment of indoor radon concentrations and facilitates evidencebased health risk prevention strategies.展开更多
The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for ...The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for personnel in refuge chamber is limited. Thus, how to effectively use the compressed air and oxygen and try to improve the time of supply has a great significance. Supplying more oxygen will result in waste, while supplying less oxygen will cause its concentration to be lower, and harm life safety. This research uses the theoretical calculation and numerical simulation, finds critical gas supply for refuge chamber, and illuminates the change law of gas concentration with critical gas supply in refuge chamber,which provides theoretical guidance for effective use of compressed air and oxygen in refuge chamber.展开更多
We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can rand...We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.展开更多
The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thick...The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.展开更多
In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation e...In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation equipments. For the construction of an extra-large section chamber in the Tangshan mine, we proposed an active support through a combination of bolting, anchor cables, lining, and a reinforced chamber floor by inverted arch pouring. ABAQUS software was used to analyze the surrounding rock deformation and the plastic zone development of the chamber under different excavation schemes.The best excavation scheme was determined, and the effectiveness of the combined supports was verified. In practice, the engineering installation showed good overall control of the movement of the surrounding rock, with roof-to-floor and side-to-side convergences of 154.6 and 77.5 mm, respectively,which meets the requirements for underground coal gangue separation.展开更多
The air bag deformation data were obtained by high-speed dynamic videos experiments. Based on gas–liquid flow VOF model, dynamic mesh technique and deformation data, numerical simulations for different structure mode...The air bag deformation data were obtained by high-speed dynamic videos experiments. Based on gas–liquid flow VOF model, dynamic mesh technique and deformation data, numerical simulations for different structure models were achieved, and the law of water motion and influencing factors were analyzed.The results show that the flow in the length direction of the jig is smooth, and second pulsation appears in the separation time and forms the secondary separation. The installation position of screen and the number of air bags have a great influence on the uniformity of flow and velocity. The screen height cannot be too low to avoid forming the unstable flow. At the same time, the screen height cannot be too high, otherwise water velocity will be too small and was unable to provide enough power. At the height of 1.4m,velocity unevenness is minimum and the best uniform flow can be obtained. Compared with double air bags, there are the following features of single air bag: water flow is not smooth, the time achieving the maximum velocity is too long, maximum velocity is smaller, and overall effect is worse than double air bags.展开更多
The 300 msw Simulated Saturation Diving Chamber Complex was designed and built by ourselves. It was completed at the end of 1985. A 300 msw trimixed saturation diving experiment was successfully conducted in the compl...The 300 msw Simulated Saturation Diving Chamber Complex was designed and built by ourselves. It was completed at the end of 1985. A 300 msw trimixed saturation diving experiment was successfully conducted in the complex by Chinese Underwater Technology Institute(CUTI) from May 22 to June 12 of 1987. During the experiment, 4 divers habitated in the complex for 20 days, and they performed 16 person-time excursion dives and 8 other tests. The result of the experiment indicates that the complex is well designed, suitably configurated, wholly integrated and steadily run, as well as of low leakage. The main functions of the complex have approached to those of the same kind in the world. The complex can be used as a basic facility for serving the nation's saturation diving technology, underwater operation, personnel training, etc.展开更多
Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds（VOCs）. However,little information on secondary aeroso...Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds（VOCs）. However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol（SOA） production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.展开更多
Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometr...Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometry-based stochastic channel models(GSCM),field patterns are technically obtained by chamber measurement(or by its best fitting).However,in some channel related performance analysis scenarios,design insight can be crystallized better by starting the derivations with theoretical co-polarization and cross-polarization components.Specifically,these two components are mathematically linked with field patterns through the proposed polarization projection algorithm.In this manuscript,we focus on revealing the transformation criterion of polarization states between the antenna plane and the propagation plane.In practice,it makes retrieving the field patterns by electromagnetic computation possible.Meanwhile,the impact imposed by distinct antenna orientations is geometrically illustrated and consequently incorporated into the proposed algorithm.This will further facilitate flexible performance evaluation of related radio transmission technologies.Our conclusions are verified by the closed-form expression of the dipole field pattern(via an analytical approach) and by chamber measurement results.Moreover,we find that its 2D degenerative case is aligned with the definitions in 3^(rd) generation partnership project(3GPP)technical report 25.996.The most obvious benefit of the proposed algorithm is to significantly reduce the cost on generating channel coefficients in GSCM simulation.展开更多
基金supported by the European Commission through the 7th Framework Programme under the grant agreement #228335 (EUROCHAMP-2 Project)by the French CNRS-INSU Programme National de Chimie Atmosphrique
文摘A tunable diode laser absorption spectrometer （TDLAS） for formaldehyde atmospheric measurements has been set up and validated through comparison experiments with a Fourier transform infrared spectrometer （FT-IR） in a simulation chamber.Formaldehyde was generated in situ in the chamber from reaction of ethene with ozone.Three HCHO ro-vibrational line intensities （at 2909.71,2912.09 and 2914.46 cm-1） possibly used by TDLAS were calibrated by FT-IR spectra simultaneously recorded in the 1600–3200 cm-1 domain during ethene ozonolysis,enabling the on-line deduction of the varying concentration for HCHO in formation.The experimental line intensities values inferred confirmed the calculated ones from the updated HITRAN database.In addition,the feasibility of stratospheric in situ HCHO measurements using the 2912.09 cm-1 line was demonstrated.The TDLAS performances were also assessed,leading to a 2σ detection limit of 88 ppt in volume mixing ratio with a response time of 60 sec at 30 Torr and 294 K for 112 m optical path.As part of this work,the room-temperature rate constant of this reaction and the HCHO formation yield were found to be in excellent agreement with the compiled literature data.
文摘Introduction:This study aimed to establish a new predictive model for indoor radon concentrations.Methods:We constructed a radon experimental model using prefabricated block walls and measured surface radon exhalation rates across multi-layer walls.The geometric parameters of various building envelopes(walls,floors,and roofs)were incorporated to calculate indoor radon concentrations from each source.Natural ventilation rates were also considered in developing the indoor radon concentration prediction model.Results:Using closed-loop measurements,we determined the surface radon exhalation rates of prefabricated block walls and established fitting functions for multiple walls under varying temperatures and thicknesses.Based on indoor geometric parameters and natural ventilation rates,we developed a comprehensive prediction model for indoor radon concentrations.The model accurately predicted indoor equilibrium radon concentrations from prefabricated walls(thickness 0.155–0.268 m)at 23℃,with deviations less than 10%from measured values within ventilation rates of 0.115±0.015/h.Conclusions:This scientifically rigorous and practical approach to predicting radon concentration,based on building composition and measurements of radon exhalation rates,enables proactive assessment of indoor radon concentrations and facilitates evidencebased health risk prevention strategies.
基金supported by the National Natural Science Foundation of China(Grant Nos.51504251,51404263)the National Natural Science Foundation of Jiangsu of China(Nos.BK20140187,BK20130203)+4 种基金the Fundamental Research Funds for the Central Universities(2015QNB01)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Central Universities Special Funds for Fundamental Research Funds of the China University of Mining and Technology(No.2014ZDPY04)the Innovation Team of CUMT(2014QN001)the Natural Science Foundation of Jiangsu Province(No.BK2012571)
文摘The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for personnel in refuge chamber is limited. Thus, how to effectively use the compressed air and oxygen and try to improve the time of supply has a great significance. Supplying more oxygen will result in waste, while supplying less oxygen will cause its concentration to be lower, and harm life safety. This research uses the theoretical calculation and numerical simulation, finds critical gas supply for refuge chamber, and illuminates the change law of gas concentration with critical gas supply in refuge chamber,which provides theoretical guidance for effective use of compressed air and oxygen in refuge chamber.
基金Supported by the State Key Laboratory of Particle Detection and Electronicsthe National Natural Science Foundation of China under Grant No 11375179
文摘We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.
基金financially supported by the National Science and Technology Major Project of China (No.J2019-VI-0004-0117)a Laboratory Fund Project (6142903220101)。
文摘The size and shape effect(SSE)of components has become a critical issue for mechanical properties,application reliability,and processing.In this study,the creep rupture life(CRL)of components with different wall thicknesses and positions in a combustion chamber casing simulator made of K439B superalloy was investigated.The intrinsic mechanisms of the SSE were explored from the dendrite structure,volume fraction and size of theγ'phase,and element segregation,etc.It is shown that this casting exhibits a strong SSE of creep rupture life,characterized by a significant difference in the CRL values up to 60%with the variation of wall thickness and position in the casing.In terms of casting technology,the influence of SSE on CRL is actually determined by the cooling rate.The SSE on the creep rupture life originates from the dendrite structure(such as the secondary dendrite arm spacing),volume fraction size of theγ'phase in the dendrite trunk,and elements segregation rate.This work may have implications for the design and application of engineering components with large sizes and complex structures.
基金supported by the National Natural Science Foundation of China (No. 51304206)the Project of National Scientific and Technical Supporting Programs Foundation of China (No. 2012BAB13B03)the Program for New Century Excellent Talents in University of Ministry of Education of China (No. NCET-11-0728)
文摘In solid backfill mining without gangue removal, the gangue is separated directly underground and backfilled into goaf. This necessitates the underground construction of an extra-large section chamber for separation equipments. For the construction of an extra-large section chamber in the Tangshan mine, we proposed an active support through a combination of bolting, anchor cables, lining, and a reinforced chamber floor by inverted arch pouring. ABAQUS software was used to analyze the surrounding rock deformation and the plastic zone development of the chamber under different excavation schemes.The best excavation scheme was determined, and the effectiveness of the combined supports was verified. In practice, the engineering installation showed good overall control of the movement of the surrounding rock, with roof-to-floor and side-to-side convergences of 154.6 and 77.5 mm, respectively,which meets the requirements for underground coal gangue separation.
基金provided by the Project of National Scientific and Technical Supporting Programs Funded of China(No.2012BAB13B03)
文摘The air bag deformation data were obtained by high-speed dynamic videos experiments. Based on gas–liquid flow VOF model, dynamic mesh technique and deformation data, numerical simulations for different structure models were achieved, and the law of water motion and influencing factors were analyzed.The results show that the flow in the length direction of the jig is smooth, and second pulsation appears in the separation time and forms the secondary separation. The installation position of screen and the number of air bags have a great influence on the uniformity of flow and velocity. The screen height cannot be too low to avoid forming the unstable flow. At the same time, the screen height cannot be too high, otherwise water velocity will be too small and was unable to provide enough power. At the height of 1.4m,velocity unevenness is minimum and the best uniform flow can be obtained. Compared with double air bags, there are the following features of single air bag: water flow is not smooth, the time achieving the maximum velocity is too long, maximum velocity is smaller, and overall effect is worse than double air bags.
文摘The 300 msw Simulated Saturation Diving Chamber Complex was designed and built by ourselves. It was completed at the end of 1985. A 300 msw trimixed saturation diving experiment was successfully conducted in the complex by Chinese Underwater Technology Institute(CUTI) from May 22 to June 12 of 1987. During the experiment, 4 divers habitated in the complex for 20 days, and they performed 16 person-time excursion dives and 8 other tests. The result of the experiment indicates that the complex is well designed, suitably configurated, wholly integrated and steadily run, as well as of low leakage. The main functions of the complex have approached to those of the same kind in the world. The complex can be used as a basic facility for serving the nation's saturation diving technology, underwater operation, personnel training, etc.
基金supported by the National Key Basic Research and Development Program (No. 2013CB228500)the National Basic Research Program (973) of China (Nos. 2013CB228503, 2013CB228502)+3 种基金National Natural Science Foundation of China (Nos. 91544214, 51636003)the Strategic Priority Research Program of Chinese Academy of Sciences (No. XDB05010500)China Postdoctoral Science Foundation (No. 2015M580929)the State Key Lab of Automotive Safety and Energy at Tsinghua University for their support for the experiments
文摘Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds（VOCs）. However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol（SOA） production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.
基金supported in part by the Natural Science Basic Research Plan in Shaanxi Province(No.2015JQ6221,No. 2015JQ6259,No.2015JM6341)the Fundamental Research Funds for the Central Universities(No.JB140109)+8 种基金the National Natural Science Foundation of China(No. 61401321,No.61372067)the National Hightech R&D Program of China(No. 2014AA01A704,No.2015AA7124058)the National Basic Research Program of China(No.2014CB340206)the National Key Technology R&D Program of China(No. 2012BAH16B00)the Next Generation Internet Program of China(No.CNGI1203003)the Research Culture Funds of Xi'an University of Science and Technology(No.201357)the Open Project of State Key Laboratory of Integrated Service Networks(No.ISN1601)the Open Research Fund of National Mobile Communications Research Laboratory (No.2015D01)the Science and Technology R&D Program of Shaanxi Province(No. 2014KJXX-49)
文摘Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometry-based stochastic channel models(GSCM),field patterns are technically obtained by chamber measurement(or by its best fitting).However,in some channel related performance analysis scenarios,design insight can be crystallized better by starting the derivations with theoretical co-polarization and cross-polarization components.Specifically,these two components are mathematically linked with field patterns through the proposed polarization projection algorithm.In this manuscript,we focus on revealing the transformation criterion of polarization states between the antenna plane and the propagation plane.In practice,it makes retrieving the field patterns by electromagnetic computation possible.Meanwhile,the impact imposed by distinct antenna orientations is geometrically illustrated and consequently incorporated into the proposed algorithm.This will further facilitate flexible performance evaluation of related radio transmission technologies.Our conclusions are verified by the closed-form expression of the dipole field pattern(via an analytical approach) and by chamber measurement results.Moreover,we find that its 2D degenerative case is aligned with the definitions in 3^(rd) generation partnership project(3GPP)technical report 25.996.The most obvious benefit of the proposed algorithm is to significantly reduce the cost on generating channel coefficients in GSCM simulation.
