-The chief purpose of the research was to understand the physiological function change regularity, performance and adaptability of the human body living and working under high pressure for prolonged time.In January 19...-The chief purpose of the research was to understand the physiological function change regularity, performance and adaptability of the human body living and working under high pressure for prolonged time.In January 1989, 4 naval divers entered the habital of NMRI's 500 msw saturation diving system after a series of adaptive diving training. The breathing mixture was helium-oxygen. After 55 h compression (including intermediate stages) the 350 msw depth was reached, where the divers lived and worked for 72 h 10 min. No sign of discomfort or significant HPNS was found in the 4 divers.The second and third day of the saturation exposure, the divers carried out 370 msw dry and wet chamber excursion diving 2 man-time each, the divers effectively carried out operational work under water, the total excursion time was 1 h each excursion dive.Saturation decompression started after 3-day storage exposure, the divers were gradually brought toward the surface 25 msw a day on the average by employing the linear steady rate of decompression. During decompression, no case of DCS occurred. Immediate post-dive medical check-ups shows that they were physically normal.More than 120 biomedical indices were monitored and measured on the divers at different period of the experiment. The organisms showed a good adaptability and certain operating capability, and both the compression and decompression profiles were proved to be satisfactory.The detailed experimental data obtained provided sound scientific basis for the practical application of future great depth open sea saturation diving.展开更多
Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for a...Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for analyzing the data of N-of-1 trials.This simulation study aimed to compare two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials.Methods:The simulated data of N-of-1 trials with different coefficients of autocorrelation,effect sizes and missing ratios are obtained by SAS 9.1 system.The missing values are filled with mean filling and regression filling respectively in the condition of different coefficients of autocorrelation,effect sizes and missing ratios by SPSS 25.0 software.Bayesian models are built to estimate the posterior means by Winbugs 14 software.Results:When the missing ratio is relatively small,e.g.5%,missing values have relatively little effect on the results.Therapeutic effects may be underestimated when the coefficient of autocorrelation increases and no filling is used.However,it may be overestimated when mean or regression filling is used,and the results after mean filling are closer to the actual effect than regression filling.In the case of moderate missing ratio,the estimated effect after mean filling is closer to the actual effect compared to regression filling.When a large missing ratio(20%)occurs,data missing can lead to significantly underestimate the effect.In this case,the estimated effect after regression filling is closer to the actual effect compared to mean filling.Conclusion:Data missing can affect the estimated therapeutic effects using Bayesian models in N-of-1 trials.The present study suggests that mean filling can be used under situation of missing ratio≤10%.Otherwise,regression filling may be preferable.展开更多
[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic...[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic dark condition for researching on nutrient release. The N(nitrogenous) and P(phosphorous) release were analyzed every two days.[Result] At the prophase, the N release in B was bigger than that in A, while the decline sediment release in A was gentle.[Conclusion] There was no accumulation of organic compound during the breeding time. The NH4-N was the main form of N release; and the P release was correlated with N release, while PO4-P was the main form of P release.展开更多
Accelerated life tests play a vital role in reliability analysis,especially as advanced technologies lead to the production of highly reliable products to meet market demands and competition.Among these tests,progress...Accelerated life tests play a vital role in reliability analysis,especially as advanced technologies lead to the production of highly reliable products to meet market demands and competition.Among these tests,progressive-stress accelerated life tests(PSALT)allow for continuous changes in applied stress.Additionally,the generalized progressive hybrid censoring(GPHC)scheme has attracted significant attention in reliability and survival analysis,particularly for handling censored data in accelerated testing.It has been applied to various failure models,including competing risks and step-stress models.However,despite its growing relevance,a notable gap remains in the literature regarding the application of GPHC in PSALT models.This paper addresses that gap by studying PSALT under a GPHC scheme with binomial removal.Specifically,it considers lifetimes following the quasi-Xgamma distribution.Model parameters are estimated using both maximum likelihood and Bayesian methods under gamma priors.Interval estimation is provided through approximate confidence intervals,bootstrap methods,and Bayesian credible intervals.Bayesian estimators are derived under squared error and entropy loss functions,using informative priors in simulation and non-informative priors in real data applications.A simulation study is conducted to evaluate various censoring schemes,with coverage probabilities and interval widths assessed via Monte Carlo simulations.Additionally,Bayesian predictive estimates and intervals are presented.The proposed methodology is illustrated through the analysis of two real-world accelerated life test datasets.展开更多
Compressive tests of [0]t2 and [90]t2 unidirectional laminates and [45/0/-45/90] 2s quasi-isotropic laminates are accomplished in both room-temperature and dry （RTD） and hygrothermal environment. And simulation stud...Compressive tests of [0]t2 and [90]t2 unidirectional laminates and [45/0/-45/90] 2s quasi-isotropic laminates are accomplished in both room-temperature and dry （RTD） and hygrothermal environment. And simulation studies on the compressive strength of Z-pinned laminates of [0112 and [45/0/-45/90] 2s are conducted by using finite element analysis （FEA）. A microstructural unit cell for FEA is created to simulate a representative laminates unit with one pin. Within the unit cell, the first directions of the elements＇ material coordinate systems are changed to simulate the fibres＇ deflecting around the pin. The hygrothermal effect is simulated by the material properties＇ adjustments which are determined by the compressive tests of non-pined laminates. The experimental results indicate that the percentage of reduction in the compressive modulus of Z-pinned laminates caused by Z-pin becomes smaller with the percentage of 0° fibres decreasing in the laminates; the compressive strength of quasi-isotropic laminates reduces and the percentage of the reduction in the compressive strength declines with Z-pin volume content increasing, and the moisture absorption ratio of the Z-pinned specimens is greater than that of the non-pinned specimens, because the cracks around Z-pin increase the moisture absorption. In addition, the simulations show that the deflection of fibres around Z-pin is the main factor for the reduction in the compressive strength of Z-pinned unidirectional laminates, the dilution of fibre volume content caused by resin-rich pocket is the principal factor for the decline in the compressive strength of Z-pinned quasi-istropic laminates, and the compressive strength of Z-pinned specimens in hygrothermal environment reduces as the result of superimposition of some factors, including the changes in material properties caused by hygrothermal environment, the deflection of fibres and the resin-rich pocket caused by Z-pin.展开更多
In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed throu...In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed through the water/silicone oil interface. Motion parameters of the bubbles and droplets were obtained using particle kinematic analysis software, and the entrainment rate of the droplets was calculated. It was found that the entrainment rate decreased from 29.5% to 0 when the viscosity of the silicone oil was increased from 60 mPa.s to 820 mPa.s in the case of bubbles with a 5 mm equivalent diameter passing through the water/silicone oil interface. The results indicate that in- creasing the viscosity of the silicone oil is conducive to reducing the entrainment rate. The entrainment rate increased from 0 to 136.3% in the case of silicone oil with a viscosity of 60 mPa.s when the equivalent diameter of the bubbles was increased from 3 mm to 7 ram. We there- fore conclude that small bubbles are also conductive to reducing the entrainment rate. The force analysis results for the water colmnn indicate that the entrainment rate of droplets is affected by the velocity of the bubble passing through the water/silicone oil interface and that the en- trainment rate decreases with the bubble velocity.展开更多
A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow...A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.展开更多
The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential vale...The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.展开更多
Background: Forest management decisions are based on expectations of future developments. For sound decisions it is essential to accurately predict the expected values in future developments and to account for their i...Background: Forest management decisions are based on expectations of future developments. For sound decisions it is essential to accurately predict the expected values in future developments and to account for their inherent uncertainty,for example the impact of climate change on forests. Changing climatic conditions affect forest productivity and alter the risk profile of forests and forest enterprises. Intensifying drought stress is seen as one major risk factor threatening forest management in the north German lowlands. Drought stress reduces tree growth and vitality and might even trigger mortality. But so far, it is not possible to quantify effects of a persistent dryer climate on forest productivity at a level suitable for forest management.Methods: We apply a well-established single-tree forest growth simulator to quantify the effect of persistent dryer climates on future forest productivity. We analyse the growth of Scots pine(Pinus sylvestris L.), European beech(Fagus sylvatico L.) and oak(Quercus robur L. and Quercus petraea(Matt.) Liebl.) in two forest regions in the north German lowlands for a time interval of 60 years until 2070. The growth response under three different climate projections is compared to a baseline scenario.Results: The results show clear differences in volume increment to persistent dryer climates between tree species. The findings exhibit regional differences and temporal trends. While mean annual increment at biological rotation age of Scots pine and oak predominantly benefits from the projected climate conditions until 2070, beech might suffer losses of up to 3 m^3·ha^(-1)yr^(-1) depending on climate scenario and region. However, in the projection period2051 to 2070 the uncertainty ranges comprise positive as well as negative climatic effects for all species.Conclusions: The projected changes in forest growth serve as quantitative contributions to provide decision support in the evaluation of, for example, species future site suitability and timber supply assessments. The analysis of productivity changes under persistent dryer climate complements the drought vulnerability assessment which is applied in practical forestry in northwestern Germany today. The projected species' productivity has strong implications for forest management and the inherent uncertainty needs to be accounted for.展开更多
In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF me...In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF method to determine free surface, 2) an explicit scheme of enthalpy to solve the energy equation more efficiently, and 3) an effective treatment to modify the flux deviation due to pressure iteration. In order to verify these methods, well controlled experiments have been repeatedly done with both water analog and gray iron pouring experiments to record the flow patterns and temperature variations. The calculated results are in accordance with the experimental ones. For the applications, the simulated initial temperature distribution right after mold filling was used to analyse subsequent solidification and to predict shrinkage defects. Actual castings were poured and tested in a foundry plant. The reuslts show that the defects predication with considering fluid flow effects is more precise than that without considering the effects.展开更多
In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid ph...In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.展开更多
Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the p...Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the pressure distribution along the span of the turbine blade, herein we call it 3D effect. However, so far the effect is rarely reported in the research, moreover, in numerical simulation. In the present study, a 3D numerical model of the turbine with the connecting arm was developed by using FLUENT software compiling the UDF（User Defined Function） command. The simulation results show that the pressure distribution along the span of blade with the connecting arm model is significantly different from those without the connecting arm. To facilitate the validation of numerical model, the laboratory experiment has been carried out by using three different types of NACA aerofoil connecting arm and circle section connecting arm. And results show that the turbine with NACA0012 connecting arm has the best start-up performance which is 0.346 m/s and the peak point of power conversion coefficient is around 0.33. A further study has been performed and a conclusion is drawn that the aerofoil and thickness of connecting arm are the most important factors on the power conversion coefficient of the vertical axis tidal current turbine.展开更多
Infections of patients from consumption of contaminated pharmaceutical products constituted major health risk problems. Medicinal products are liable to microbial intrusion during in-use application. The current study...Infections of patients from consumption of contaminated pharmaceutical products constituted major health risk problems. Medicinal products are liable to microbial intrusion during in-use application. The current study focused on repeated contamination with constant level of microbiological burden by two bacteria viz. Staphylococcus aureus and Pseudomonas aeruginosa were used as dose-response models for infection through two different routes of administration. Nine different forms of insulin vials were subjected to this type of simulation study at constant assumed level of contaminations, preservative efficacy test(PET) and dose potency. Multi-spot contamination imitation study showed that initial fast rise in contamination, followed shortly by longer but steeper slope which finally turned into higher rate of contamination during the few last doses of the unit dosage forms, where the volume of the product became increasingly and progressively very small. When the probability of infection curves was constructed, both S. aureus and P. aeruginosa showed same pattern, with notably higher risk from septicemia route of the latter rather than subcutaneous route of the former. The present simulation study showed that continuous use of the same contaminated syringe progressively increased the risk of infection, especially at final few doses(between 3th and 10 th last doses depending on the dosage form sizes in the vials and the administration volumes) of the product. Small volume parenterals(SVP) are especially products at higher risk than the larger volume ones.展开更多
We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of ...We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.展开更多
A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coeffici...A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coefficients were assumed to reduce with a reversedmagnetic shear and the LH driven current profile was evaluated by fitting dynamic change inthe measured current profile. The gradual increase in the central electron temperature could beexplained by the change in the current profile during LHCD in the present simulation model. Theestimated LH-driven current profile by the transport code analysis shows a finite current densityat the plasma center. Analysis of transport simulation suggests some mechanisms for broadeningthe LH-driven current profile at the central region of the plasma.展开更多
The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and di...The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and discuss the simulation of the graphene assembly process based on the finite element method. The simulated results illustrate that the accelerated motion of graphene is in agreement with the distribution of the electric field squared gradient. We also conduct research on the controllable parameters of the DEP assembly such as the alternating current （AC） frequency, the shape of micro-electrodes, and the ratio of the gap between electrodes to the characteristic/geometric length of graphene （λ）. The simulations based on the Clausius-Mossotti factor reveal that both graphene velocity and direction are influenced by the AC frequency. When graphene is close to the electrodes, the shape of micro-electrodes will exert great influence on the velocity of graphene. Also, λ has a great influence on the velocity of graphene. Generally, the velocity of graphene would be greater when λ is in the range of 0.4 0.6. The study is of a theoretical guiding significance in improving the precision and efficiency of the graphene DEP assembly.展开更多
The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to f...The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to find the sources of faults, and thereafter will assist the operator to act correctly and to prevent the fault from further development.In this paper, a simulation study of an expert system, which can diagnose the running faults of boiler system, is conducted. Shallow and deep two-layer knowledge base structure is used in this two layers of knowledge base. So. this kind of expert system can overcome the disadvantages of the old types of expert systems, which are only able to deal with experience rules base.A simulator of power boiler is used for the research on fault diagnose expert system. This boiler simulator gives all necessary information for the diagnosis. The knowledge base of expert system is built in hierarchies, so the speed of reasoning may be invreased. After the reasoning the展开更多
文摘-The chief purpose of the research was to understand the physiological function change regularity, performance and adaptability of the human body living and working under high pressure for prolonged time.In January 1989, 4 naval divers entered the habital of NMRI's 500 msw saturation diving system after a series of adaptive diving training. The breathing mixture was helium-oxygen. After 55 h compression (including intermediate stages) the 350 msw depth was reached, where the divers lived and worked for 72 h 10 min. No sign of discomfort or significant HPNS was found in the 4 divers.The second and third day of the saturation exposure, the divers carried out 370 msw dry and wet chamber excursion diving 2 man-time each, the divers effectively carried out operational work under water, the total excursion time was 1 h each excursion dive.Saturation decompression started after 3-day storage exposure, the divers were gradually brought toward the surface 25 msw a day on the average by employing the linear steady rate of decompression. During decompression, no case of DCS occurred. Immediate post-dive medical check-ups shows that they were physically normal.More than 120 biomedical indices were monitored and measured on the divers at different period of the experiment. The organisms showed a good adaptability and certain operating capability, and both the compression and decompression profiles were proved to be satisfactory.The detailed experimental data obtained provided sound scientific basis for the practical application of future great depth open sea saturation diving.
基金supported by the National Natural Science Foundation of China (No.81973705).
文摘Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for analyzing the data of N-of-1 trials.This simulation study aimed to compare two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials.Methods:The simulated data of N-of-1 trials with different coefficients of autocorrelation,effect sizes and missing ratios are obtained by SAS 9.1 system.The missing values are filled with mean filling and regression filling respectively in the condition of different coefficients of autocorrelation,effect sizes and missing ratios by SPSS 25.0 software.Bayesian models are built to estimate the posterior means by Winbugs 14 software.Results:When the missing ratio is relatively small,e.g.5%,missing values have relatively little effect on the results.Therapeutic effects may be underestimated when the coefficient of autocorrelation increases and no filling is used.However,it may be overestimated when mean or regression filling is used,and the results after mean filling are closer to the actual effect than regression filling.In the case of moderate missing ratio,the estimated effect after mean filling is closer to the actual effect compared to regression filling.When a large missing ratio(20%)occurs,data missing can lead to significantly underestimate the effect.In this case,the estimated effect after regression filling is closer to the actual effect compared to mean filling.Conclusion:Data missing can affect the estimated therapeutic effects using Bayesian models in N-of-1 trials.The present study suggests that mean filling can be used under situation of missing ratio≤10%.Otherwise,regression filling may be preferable.
基金Supported by the National High Technology Research and Development Program of China (863 Program)(2007AA10Z239)the National Key Technology R&D Program(2006BAD03B0102)+2 种基金the Natural Science Foundation of Guangdong Province(5004159)Scienceand Technology Planning Project of Guangdong Province(2005N33201012)the Open Fund of Key Laboratory of Genetic Breeding and Aquaculture Biology of Freshwater Fishes,Ministry of Agriculture(BM2007-03)~~
文摘[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic dark condition for researching on nutrient release. The N(nitrogenous) and P(phosphorous) release were analyzed every two days.[Result] At the prophase, the N release in B was bigger than that in A, while the decline sediment release in A was gentle.[Conclusion] There was no accumulation of organic compound during the breeding time. The NH4-N was the main form of N release; and the P release was correlated with N release, while PO4-P was the main form of P release.
基金supported and funded by the Deanship of Scientifc Research at ImamMohammad Ibn Saud Islamic University(IMSIU)(grant number IMSIU-DDRSP2503).
文摘Accelerated life tests play a vital role in reliability analysis,especially as advanced technologies lead to the production of highly reliable products to meet market demands and competition.Among these tests,progressive-stress accelerated life tests(PSALT)allow for continuous changes in applied stress.Additionally,the generalized progressive hybrid censoring(GPHC)scheme has attracted significant attention in reliability and survival analysis,particularly for handling censored data in accelerated testing.It has been applied to various failure models,including competing risks and step-stress models.However,despite its growing relevance,a notable gap remains in the literature regarding the application of GPHC in PSALT models.This paper addresses that gap by studying PSALT under a GPHC scheme with binomial removal.Specifically,it considers lifetimes following the quasi-Xgamma distribution.Model parameters are estimated using both maximum likelihood and Bayesian methods under gamma priors.Interval estimation is provided through approximate confidence intervals,bootstrap methods,and Bayesian credible intervals.Bayesian estimators are derived under squared error and entropy loss functions,using informative priors in simulation and non-informative priors in real data applications.A simulation study is conducted to evaluate various censoring schemes,with coverage probabilities and interval widths assessed via Monte Carlo simulations.Additionally,Bayesian predictive estimates and intervals are presented.The proposed methodology is illustrated through the analysis of two real-world accelerated life test datasets.
基金National Basic Research Program of China(2011CB606105)
文摘Compressive tests of [0]t2 and [90]t2 unidirectional laminates and [45/0/-45/90] 2s quasi-isotropic laminates are accomplished in both room-temperature and dry （RTD） and hygrothermal environment. And simulation studies on the compressive strength of Z-pinned laminates of [0112 and [45/0/-45/90] 2s are conducted by using finite element analysis （FEA）. A microstructural unit cell for FEA is created to simulate a representative laminates unit with one pin. Within the unit cell, the first directions of the elements＇ material coordinate systems are changed to simulate the fibres＇ deflecting around the pin. The hygrothermal effect is simulated by the material properties＇ adjustments which are determined by the compressive tests of non-pined laminates. The experimental results indicate that the percentage of reduction in the compressive modulus of Z-pinned laminates caused by Z-pin becomes smaller with the percentage of 0° fibres decreasing in the laminates; the compressive strength of quasi-isotropic laminates reduces and the percentage of the reduction in the compressive strength declines with Z-pin volume content increasing, and the moisture absorption ratio of the Z-pinned specimens is greater than that of the non-pinned specimens, because the cracks around Z-pin increase the moisture absorption. In addition, the simulations show that the deflection of fibres around Z-pin is the main factor for the reduction in the compressive strength of Z-pinned unidirectional laminates, the dilution of fibre volume content caused by resin-rich pocket is the principal factor for the decline in the compressive strength of Z-pinned quasi-istropic laminates, and the compressive strength of Z-pinned specimens in hygrothermal environment reduces as the result of superimposition of some factors, including the changes in material properties caused by hygrothermal environment, the deflection of fibres and the resin-rich pocket caused by Z-pin.
基金financially supported by the China Postdoctoral Science Foundation (Nos. 2015T80039 and 2014M560890)
文摘In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed through the water/silicone oil interface. Motion parameters of the bubbles and droplets were obtained using particle kinematic analysis software, and the entrainment rate of the droplets was calculated. It was found that the entrainment rate decreased from 29.5% to 0 when the viscosity of the silicone oil was increased from 60 mPa.s to 820 mPa.s in the case of bubbles with a 5 mm equivalent diameter passing through the water/silicone oil interface. The results indicate that in- creasing the viscosity of the silicone oil is conducive to reducing the entrainment rate. The entrainment rate increased from 0 to 136.3% in the case of silicone oil with a viscosity of 60 mPa.s when the equivalent diameter of the bubbles was increased from 3 mm to 7 ram. We there- fore conclude that small bubbles are also conductive to reducing the entrainment rate. The force analysis results for the water colmnn indicate that the entrainment rate of droplets is affected by the velocity of the bubble passing through the water/silicone oil interface and that the en- trainment rate decreases with the bubble velocity.
文摘A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.
文摘The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.
基金funded by the German Federal Ministry of Fducation and Research under research grant 033L029H and is part of the interdisciplinary research project"Sustainable land-use management in the North German lowlands"
文摘Background: Forest management decisions are based on expectations of future developments. For sound decisions it is essential to accurately predict the expected values in future developments and to account for their inherent uncertainty,for example the impact of climate change on forests. Changing climatic conditions affect forest productivity and alter the risk profile of forests and forest enterprises. Intensifying drought stress is seen as one major risk factor threatening forest management in the north German lowlands. Drought stress reduces tree growth and vitality and might even trigger mortality. But so far, it is not possible to quantify effects of a persistent dryer climate on forest productivity at a level suitable for forest management.Methods: We apply a well-established single-tree forest growth simulator to quantify the effect of persistent dryer climates on future forest productivity. We analyse the growth of Scots pine(Pinus sylvestris L.), European beech(Fagus sylvatico L.) and oak(Quercus robur L. and Quercus petraea(Matt.) Liebl.) in two forest regions in the north German lowlands for a time interval of 60 years until 2070. The growth response under three different climate projections is compared to a baseline scenario.Results: The results show clear differences in volume increment to persistent dryer climates between tree species. The findings exhibit regional differences and temporal trends. While mean annual increment at biological rotation age of Scots pine and oak predominantly benefits from the projected climate conditions until 2070, beech might suffer losses of up to 3 m^3·ha^(-1)yr^(-1) depending on climate scenario and region. However, in the projection period2051 to 2070 the uncertainty ranges comprise positive as well as negative climatic effects for all species.Conclusions: The projected changes in forest growth serve as quantitative contributions to provide decision support in the evaluation of, for example, species future site suitability and timber supply assessments. The analysis of productivity changes under persistent dryer climate complements the drought vulnerability assessment which is applied in practical forestry in northwestern Germany today. The projected species' productivity has strong implications for forest management and the inherent uncertainty needs to be accounted for.
文摘In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF method to determine free surface, 2) an explicit scheme of enthalpy to solve the energy equation more efficiently, and 3) an effective treatment to modify the flux deviation due to pressure iteration. In order to verify these methods, well controlled experiments have been repeatedly done with both water analog and gray iron pouring experiments to record the flow patterns and temperature variations. The calculated results are in accordance with the experimental ones. For the applications, the simulated initial temperature distribution right after mold filling was used to analyse subsequent solidification and to predict shrinkage defects. Actual castings were poured and tested in a foundry plant. The reuslts show that the defects predication with considering fluid flow effects is more precise than that without considering the effects.
文摘In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.
基金financially supported by the State Oceanic Administration of China(Grant No.GHME2011CL01)the Program of State Key Laboratory of Coastal and Offshore Engineering(Grant No.LP1102)
文摘Vertical axis tidal current turbine is a promising device to extract energy from ocean current. One of the important components of the turbine is the connecting arm, which can bring about a significant effect on the pressure distribution along the span of the turbine blade, herein we call it 3D effect. However, so far the effect is rarely reported in the research, moreover, in numerical simulation. In the present study, a 3D numerical model of the turbine with the connecting arm was developed by using FLUENT software compiling the UDF（User Defined Function） command. The simulation results show that the pressure distribution along the span of blade with the connecting arm model is significantly different from those without the connecting arm. To facilitate the validation of numerical model, the laboratory experiment has been carried out by using three different types of NACA aerofoil connecting arm and circle section connecting arm. And results show that the turbine with NACA0012 connecting arm has the best start-up performance which is 0.346 m/s and the peak point of power conversion coefficient is around 0.33. A further study has been performed and a conclusion is drawn that the aerofoil and thickness of connecting arm are the most important factors on the power conversion coefficient of the vertical axis tidal current turbine.
基金supported and partially financially by HIKMA Pharma Pharmaceutical Company-2nd Industrial Zone-6th of October city,Egypt
文摘Infections of patients from consumption of contaminated pharmaceutical products constituted major health risk problems. Medicinal products are liable to microbial intrusion during in-use application. The current study focused on repeated contamination with constant level of microbiological burden by two bacteria viz. Staphylococcus aureus and Pseudomonas aeruginosa were used as dose-response models for infection through two different routes of administration. Nine different forms of insulin vials were subjected to this type of simulation study at constant assumed level of contaminations, preservative efficacy test(PET) and dose potency. Multi-spot contamination imitation study showed that initial fast rise in contamination, followed shortly by longer but steeper slope which finally turned into higher rate of contamination during the few last doses of the unit dosage forms, where the volume of the product became increasingly and progressively very small. When the probability of infection curves was constructed, both S. aureus and P. aeruginosa showed same pattern, with notably higher risk from septicemia route of the latter rather than subcutaneous route of the former. The present simulation study showed that continuous use of the same contaminated syringe progressively increased the risk of infection, especially at final few doses(between 3th and 10 th last doses depending on the dosage form sizes in the vials and the administration volumes) of the product. Small volume parenterals(SVP) are especially products at higher risk than the larger volume ones.
基金Supported by the Basic Science Research Program through the National Research Foundation of Korea Funded by the Ministry of Education,Science and Technology under Grant No 2012-0002777
文摘We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.
文摘A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coefficients were assumed to reduce with a reversedmagnetic shear and the LH driven current profile was evaluated by fitting dynamic change inthe measured current profile. The gradual increase in the central electron temperature could beexplained by the change in the current profile during LHCD in the present simulation model. Theestimated LH-driven current profile by the transport code analysis shows a finite current densityat the plasma center. Analysis of transport simulation suggests some mechanisms for broadeningthe LH-driven current profile at the central region of the plasma.
基金Supported by the Basic Research Project of Shanxi Province under Grant No 2015021092the National Natural Science Foundation of China under Grant Nos 61471255,61474079,61501316,51505324 and 51622507the National High-Technology Research and Development Program of China under Grant No 2015AA042601
文摘The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and discuss the simulation of the graphene assembly process based on the finite element method. The simulated results illustrate that the accelerated motion of graphene is in agreement with the distribution of the electric field squared gradient. We also conduct research on the controllable parameters of the DEP assembly such as the alternating current （AC） frequency, the shape of micro-electrodes, and the ratio of the gap between electrodes to the characteristic/geometric length of graphene （λ）. The simulations based on the Clausius-Mossotti factor reveal that both graphene velocity and direction are influenced by the AC frequency. When graphene is close to the electrodes, the shape of micro-electrodes will exert great influence on the velocity of graphene. Also, λ has a great influence on the velocity of graphene. Generally, the velocity of graphene would be greater when λ is in the range of 0.4 0.6. The study is of a theoretical guiding significance in improving the precision and efficiency of the graphene DEP assembly.
文摘The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to find the sources of faults, and thereafter will assist the operator to act correctly and to prevent the fault from further development.In this paper, a simulation study of an expert system, which can diagnose the running faults of boiler system, is conducted. Shallow and deep two-layer knowledge base structure is used in this two layers of knowledge base. So. this kind of expert system can overcome the disadvantages of the old types of expert systems, which are only able to deal with experience rules base.A simulator of power boiler is used for the research on fault diagnose expert system. This boiler simulator gives all necessary information for the diagnosis. The knowledge base of expert system is built in hierarchies, so the speed of reasoning may be invreased. After the reasoning the
