The comprehensive understanding of the structure-dependent electrostatic discharge behaviors in a conventional diode-triggered silicon controlled rectifier （DTSCR） is presented in this paper. Combined with the devic...The comprehensive understanding of the structure-dependent electrostatic discharge behaviors in a conventional diode-triggered silicon controlled rectifier （DTSCR） is presented in this paper. Combined with the device simulation, a mathematical model is built to get a more in-depth insight into this phenomenon. The theoretical studies are verified by the transmission-line-pulsing （TLP） test results of the modified DTSCR structure, which is realized in a 65-nm complementary metal-oxide-semiconductor （CMOS） process. The detailed analysis of the physical mechanism is used to provide predictions as the DTSCR-based protection scheme is required. In addition, a method is also presented to achieve the tradeoff between the leakage and trigger voltage in DTSCR.展开更多
A diode-triggered silicon controlled rectifier (DTSCR) is being developed as an electrostatic discharge (ESD) pro- tection device for low voltage applications. However, DTSCR leaks high current during normal operation...A diode-triggered silicon controlled rectifier (DTSCR) is being developed as an electrostatic discharge (ESD) pro- tection device for low voltage applications. However, DTSCR leaks high current during normal operation due to the Darlington effect of the triggering-assist diode string. In this study, two types of diode string triggered SCRs are designed for low leakage consideration; the modified diode string and composite polysilicon diode string triggered SCRs (MDTSCR & PDTSCR). Com- pared with the conventional DTSCR (CDTSCR), the MDTSCR has a much lower substrate leakage current with a relatively large silicon cost, and the PDTSCR has a much lower substrate leakage current with similar area and shows good leakage performance at a high temperature. Other DTSCR ESD properties are also investigated, especially regarding their layout, triggering voltage and failure current.展开更多
We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footpr...We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ～7-ms tuning time and ～27-dB extinction ratio.展开更多
A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorab...A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.展开更多
Rectangular section control technology （RSCT） was introduced to achieve high-precision profile control during silicon steel rolling. The RSCT principle and method were designed, and the whole RSCT control strategy w...Rectangular section control technology （RSCT） was introduced to achieve high-precision profile control during silicon steel rolling. The RSCT principle and method were designed, and the whole RSCT control strategy was developed. Specifically, RSCT included roll contour design, roiling technology optimization, and control strategy development, aiming at both hot strip mills （HSMs） and cold strip mills （CSMs）. Firstly, through the high-performance variable crown （HVC） work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs, a hot strip with a stable crown and limited wedge, ：local spot, and single wave was obtained, which was suitable for cold rolling. Secondly, an approximately rectangular section was obtained by edge varying contact （EVC） work roll contour design, edge-drop setting control, and. closed loop control in the upper-stream, stands of CSMs. Moreover, complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs. In addition, the RSCT approach was applied in several silicon-steel production plants, where an outsicanding performance and remarkable economic benefits were observed.展开更多
In this paper,a new type of optically controllable silicon slab loaded E-plane millimeterwave rectangular waveguide switch is presented.It uses SELFOC lens to couple optical puls-es to silicon slab with optical fiber....In this paper,a new type of optically controllable silicon slab loaded E-plane millimeterwave rectangular waveguide switch is presented.It uses SELFOC lens to couple optical puls-es to silicon slab with optical fiber.The on/off ratio reaches 42dB,the front fringe of suchkind swith is less than 0.05μs,and the insertion loss is less than 1dB in the full band of 26.5GHz to 40GHz.展开更多
Transverse thickness difference is an important quality index of non-oriented silicon steel strips. In order to fulfill users＇ accuracy requirements on the transverse thickness of silicon steel and improve the produc...Transverse thickness difference is an important quality index of non-oriented silicon steel strips. In order to fulfill users＇ accuracy requirements on the transverse thickness of silicon steel and improve the production yield, the factors influencing transverse thickness difference were analyzed. Then the work roll shape, control strategy and incoming hot-rolled strips were optimized. Since the optimization measures were implemented in the actual production, the thickness difference of non-oriented silicon steel has been reduced greatly and fulfilled the requirements placed by users. These measures have achieved remarkable effects.展开更多
MPI（multishot pellet injector） was imported from Russia about ten years ago. During the year＇s operation in HL-1M, most electrical equipments were repaired. Since the components are non-standard, so it is difficult...MPI（multishot pellet injector） was imported from Russia about ten years ago. During the year＇s operation in HL-1M, most electrical equipments were repaired. Since the components are non-standard, so it is difficult to maintain. To fueling experiment meet the requirement of in HL-2A. The power supplies of fast valve and a programmable controller for shooting pellets were developed.展开更多
In order to solve the difficult profile and flatness control problem of wide non-oriented electrical steel sheets, the factors such as the relationship between strip crown control and strip width, the relationship bet...In order to solve the difficult profile and flatness control problem of wide non-oriented electrical steel sheets, the factors such as the relationship between strip crown control and strip width, the relationship between the maximum wearing value of work roll and the number of a rolling campaign and the wear contour change of work roll were analyzed on the basis of industrial test. Through analyzing the rolling process characteristics of non-oriented e- lectrical steel sheets, the ASR （asymmetry self-compensating work rolls） shape control technology and its roll shift- ing strategy of the wider non-oriented electrical steel sheets was proposed and developed. When the technology was applied, the number of the wide non-oriented electrical steel （2.3 mm× 1 280 mm） in one rolling campaign rose from 40 coils of the trial production to 70 coils of the industrial production, the ratio of the measured strip crown less than 45 um was increased from 50.0% to 94.9%, and the ratio of the measured strip crown more than 60 um was decreased from 20.0% to 0.7%.展开更多
The dynamic stiffness and the specific damping energy, as well as the vibration response characteristics of a silicone rubber isolator were researched. The results of the vibration test showed that the silicone rubber...The dynamic stiffness and the specific damping energy, as well as the vibration response characteristics of a silicone rubber isolator were researched. The results of the vibration test showed that the silicone rubber isolator was excellent in the performance of vibration control. The dynamic stiffness and the damping characteristics were non-linear. From the comparison between experimental results and simulation analysis, the displacement transmissibility characteristics of the isolator were obtained. As a result, the dynamic characteristics of the isolator could be accurately described by the quadratic type non-linear terms at small amolitude.展开更多
基金Project supported by the Beijing Municipal Natural Science Foundation,China(Grant No.4162030)the National Science and Technology Major Project of China(Grant No.2013ZX02303002)
文摘The comprehensive understanding of the structure-dependent electrostatic discharge behaviors in a conventional diode-triggered silicon controlled rectifier （DTSCR） is presented in this paper. Combined with the device simulation, a mathematical model is built to get a more in-depth insight into this phenomenon. The theoretical studies are verified by the transmission-line-pulsing （TLP） test results of the modified DTSCR structure, which is realized in a 65-nm complementary metal-oxide-semiconductor （CMOS） process. The detailed analysis of the physical mechanism is used to provide predictions as the DTSCR-based protection scheme is required. In addition, a method is also presented to achieve the tradeoff between the leakage and trigger voltage in DTSCR.
基金Project partially supported by the Zhejiang Provincial Nature Science Fund of China (Nos. Y107055 and Y1080546)the Semiconductor Manufacturing International Corp. (SMIC)
文摘A diode-triggered silicon controlled rectifier (DTSCR) is being developed as an electrostatic discharge (ESD) pro- tection device for low voltage applications. However, DTSCR leaks high current during normal operation due to the Darlington effect of the triggering-assist diode string. In this study, two types of diode string triggered SCRs are designed for low leakage consideration; the modified diode string and composite polysilicon diode string triggered SCRs (MDTSCR & PDTSCR). Com- pared with the conventional DTSCR (CDTSCR), the MDTSCR has a much lower substrate leakage current with a relatively large silicon cost, and the PDTSCR has a much lower substrate leakage current with similar area and shows good leakage performance at a high temperature. Other DTSCR ESD properties are also investigated, especially regarding their layout, triggering voltage and failure current.
基金supported by the National Key R&D Pro-gram of China under Grant 2016YFB0402501in part by the Natural Science Foundation of China under grant 61605112Open Fund of IPOC under grant BUPT
文摘We propose and experimentally demonstrate an integrated silicon photonic scheme to generate multi-channel millimeter-wave(MMW) signals for 5 G multi-user applications. The fabricated silicon photonic chip has a footprint of 1.1 × 2.1 mm^2 and integrates 7 independent channels each having on-chip polarization control and heterodyne mixing functions. 7 channels of4-Gb/s QPSK baseband signals are delivered via a 2-km multi-core fiber(MCF) and coupled into the chip with a local oscillator(LO) light. The polarization state of each signal light is automatically adjusted and aligned with that of the LO light, and then 7 channels of 28-GHz MMW carrying 4-Gb/s QPSK signals are generated by optical heterodyne beating. Automated polarizationcontrol function of each channel is also demonstrated with ～7-ms tuning time and ～27-dB extinction ratio.
基金the National Outstanding YOung Scientist Foundation Under Grant !No.59925208 the National Natural Science Foundation of China
文摘A novel temperature fluctuation synthesis/simultaneous densification process was developed for the preparation of Ti3SiC2 bulk ceramics. In this process. Si is used as an in-situ liquid forming phase and it is favorable for both the solid-liquid synthesis and the densification of Ti3SiC2 rainies. The present work demonstrated that the temperature fluctuation synthesis/simultaneous densification process is one of the most effective and simple methods for the preparation of Ti3SiC2 bulk materials providing relatively low synthesis temperature. short reaction time; and simultaneous synthesis and densification. This work also showed the capability to control the microstructure, e.g., the preferred orientation, of the bulk Ti3SiC2 materials simply by applying the hot pressing pressure at different Stages of the temperature fluctuation process. And textured Ti3SiC2 bulk materials with {002} faces of laminated Ti3SiC2 grains normal to the hot pressing axis were prepared.
基金Item Sponsored by National Natural Science Foundation of China(51304017)National Key Technology Research and Development Program of the 12th Five-year Plan of China(2012BAF04B02)Fundamental Research Funds for Central Universities of China(FRF-SD-12-013B)
文摘Rectangular section control technology （RSCT） was introduced to achieve high-precision profile control during silicon steel rolling. The RSCT principle and method were designed, and the whole RSCT control strategy was developed. Specifically, RSCT included roll contour design, roiling technology optimization, and control strategy development, aiming at both hot strip mills （HSMs） and cold strip mills （CSMs）. Firstly, through the high-performance variable crown （HVC） work roll optimization design in the upper-stream stands and the limited shifting technology for schedule-free rolling in the downstream stands of HSMs, a hot strip with a stable crown and limited wedge, ：local spot, and single wave was obtained, which was suitable for cold rolling. Secondly, an approximately rectangular section was obtained by edge varying contact （EVC） work roll contour design, edge-drop setting control, and. closed loop control in the upper-stream, stands of CSMs. Moreover, complex-mode flatness control was realized by coordinating multiple shape-control methods in the downstream stands of CSMs. In addition, the RSCT approach was applied in several silicon-steel production plants, where an outsicanding performance and remarkable economic benefits were observed.
文摘In this paper,a new type of optically controllable silicon slab loaded E-plane millimeterwave rectangular waveguide switch is presented.It uses SELFOC lens to couple optical puls-es to silicon slab with optical fiber.The on/off ratio reaches 42dB,the front fringe of suchkind swith is less than 0.05μs,and the insertion loss is less than 1dB in the full band of 26.5GHz to 40GHz.
文摘Transverse thickness difference is an important quality index of non-oriented silicon steel strips. In order to fulfill users＇ accuracy requirements on the transverse thickness of silicon steel and improve the production yield, the factors influencing transverse thickness difference were analyzed. Then the work roll shape, control strategy and incoming hot-rolled strips were optimized. Since the optimization measures were implemented in the actual production, the thickness difference of non-oriented silicon steel has been reduced greatly and fulfilled the requirements placed by users. These measures have achieved remarkable effects.
文摘MPI（multishot pellet injector） was imported from Russia about ten years ago. During the year＇s operation in HL-1M, most electrical equipments were repaired. Since the components are non-standard, so it is difficult to maintain. To fueling experiment meet the requirement of in HL-2A. The power supplies of fast valve and a programmable controller for shooting pellets were developed.
文摘In order to solve the difficult profile and flatness control problem of wide non-oriented electrical steel sheets, the factors such as the relationship between strip crown control and strip width, the relationship between the maximum wearing value of work roll and the number of a rolling campaign and the wear contour change of work roll were analyzed on the basis of industrial test. Through analyzing the rolling process characteristics of non-oriented e- lectrical steel sheets, the ASR （asymmetry self-compensating work rolls） shape control technology and its roll shift- ing strategy of the wider non-oriented electrical steel sheets was proposed and developed. When the technology was applied, the number of the wide non-oriented electrical steel （2.3 mm× 1 280 mm） in one rolling campaign rose from 40 coils of the trial production to 70 coils of the industrial production, the ratio of the measured strip crown less than 45 um was increased from 50.0% to 94.9%, and the ratio of the measured strip crown more than 60 um was decreased from 20.0% to 0.7%.
文摘The dynamic stiffness and the specific damping energy, as well as the vibration response characteristics of a silicone rubber isolator were researched. The results of the vibration test showed that the silicone rubber isolator was excellent in the performance of vibration control. The dynamic stiffness and the damping characteristics were non-linear. From the comparison between experimental results and simulation analysis, the displacement transmissibility characteristics of the isolator were obtained. As a result, the dynamic characteristics of the isolator could be accurately described by the quadratic type non-linear terms at small amolitude.
