The new type of embedded signal processing system based on the packet switched network is achieved. According to the application field and the-characteristics of signal processing system, the RapidIO protocol is used ...The new type of embedded signal processing system based on the packet switched network is achieved. According to the application field and the-characteristics of signal processing system, the RapidIO protocol is used to solve the high-speed interconnection of multi-digital signal processor （DSP）. Based on this protocol, a kind of crossbar switch module which is used to interconnect multi-DSP in the system is introduced. A route strategy, some flow control rules and error control rules, which adapt to different RapidIO network topology are also introduced. Crossbar switch performance is analyzed in detail by the probability module. By researching the technique of crossbar switch and analyzing the system performance, it has a significant meaning for building the general signal processing system.展开更多
A low-power complementary metal oxide semiconductor（CMOS） operational amplifier （op-amp） for real-time signal processing of micro air vehicle （MAV） is designed in this paper.Traditional folded cascode architectu...A low-power complementary metal oxide semiconductor（CMOS） operational amplifier （op-amp） for real-time signal processing of micro air vehicle （MAV） is designed in this paper.Traditional folded cascode architecture with positive channel metal oxide semiconductor（PMOS） differential input transistors and sub-threshold technology are applied under the low supply voltage.Simulation results show that this amplifier has significantly low power,while maintaining almost the same gain,bandwidth and other key performances.The power required is only 0.12 mW,which is applicable to low-power and low-voltage real-time signal acquisition and processing system.展开更多
Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is ...Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.展开更多
The neutron count rate fluctuation reaches six orders of magnitude between the ohmic plasma scenario and high power of auxiliary heating on an experimental advanced superconducting tokamak(EAST).The measurement result...The neutron count rate fluctuation reaches six orders of magnitude between the ohmic plasma scenario and high power of auxiliary heating on an experimental advanced superconducting tokamak(EAST).The measurement result of neutron flux monitoring(NFM)is a significant feedback parameter related to the acquisition of radiation protection-related information and rapid fluctuations in neutron emission induced by plasma magnetohydrodynamic activity.Therefore,a wide range and high time resolution are required for the NFM system on EAST.To satisfy these requirements,a digital pulse signal acquisition and processing system with a wide dynamic range and fast response time was developed.The present study was conducted using a field-programmable gate array(FPGA)and peripheral component interconnect extension for instrument express(PXIe)platform.The digital dual measurement modes,which are composed of the pulse-counting mode and AC coupled square integral's Campbelling mode,were designed to expand the measurement range of the signal acquisition and processing system.The time resolution of the signal acquisition and processing system was improved from 10 to 1 ms owing to utilizing highspeed analog-to-digital converters(ADCs),a high-speed PXIe communication with a direct memory access(DMA)mode,and online data preprocessing technology of FPGA.The signal acquisition and processing system was tested experimentally in the EAST radiation field.The test results showed that the time resolution of NFM was improved to 1 ms,and the dynamic range of the neutron counts rate was expanded to more than 10^(6) counts per second.The Campbelling mode was calibrated using a multipoint average linear fitting method;subsequently,the fitting coefficient reached 0.9911.Therefore,the newly developed pulse signal acquisition and processing system ensures that the NFM system meets the requirements of high-parameter experiments conducted on EAST more effectively.展开更多
We propose and demonstrate a reconfigurable and single-shot incoherent optical signal processing system for chirped microwave signal compression, using a programmable optical filter and a multiwavelength laser(MWL). T...We propose and demonstrate a reconfigurable and single-shot incoherent optical signal processing system for chirped microwave signal compression, using a programmable optical filter and a multiwavelength laser(MWL). The system is implemented by temporally modulating a specially shaped MWL followed by a suitable linear dispersive medium. A microwave dispersion value up to 1.33 ns/GHz over several GHz bandwidth is achieved based on this approach. Here we demonstrate a singleshot compression for different linearly chirped microwave signals over several GHz bandwidth. In addition, the robustness of the proposed system when input RF signals are largely distorted is also discussed.展开更多
Depression has become one of the most common mental illnesses in the world.For better prediction and diagnosis,methods of automatic depression recognition based on speech signal are constantly proposed and updated,wit...Depression has become one of the most common mental illnesses in the world.For better prediction and diagnosis,methods of automatic depression recognition based on speech signal are constantly proposed and updated,with a transition from the early traditional methods based on hand‐crafted features to the application of architectures of deep learning.This paper systematically and precisely outlines the most prominent and up‐to‐date research of automatic depression recognition by intelligent speech signal processing so far.Furthermore,methods for acoustic feature extraction,algorithms for classification and regression,as well as end to end deep models are investigated and analysed.Finally,general trends are summarised and key unresolved issues are identified to be considered in future studies of automatic speech depression recognition.展开更多
On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.Th...On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.展开更多
Power converters are essential components in modern life,being widely used in industry,automation,transportation,and household appliances.In many critical applications,their failure can lead not only to financial loss...Power converters are essential components in modern life,being widely used in industry,automation,transportation,and household appliances.In many critical applications,their failure can lead not only to financial losses due to operational downtime but also to serious risks to human safety.The capacitors forming the output filter,typically aluminumelectrolytic capacitors(AECs),are among the most critical and susceptible components in power converters.The electrolyte in AECs often evaporates over time,causing the internal resistance to rise and the capacitance to drop,ultimately leading to component failure.Detecting this fault requires measuring the current in the capacitor,rendering the method invasive and frequently impractical due to spatial constraints or operational limitations imposed by the integration of a current sensor in the capacitor branch.This article proposes the implementation of an online noninvasive fault diagnosis technique for estimating the Equivalent Series Resistance(ESR)and Capacitance(C)values of the capacitor,employing a combination of signal processing techniques(SPT)and machine learning(ML)algorithms.This solution relies solely on the converter’s input and output signals,therefore making it a non-invasive approach.The ML algorithm used was linear regression,applied to 27 attributes,21 of which were generated through feature engineering to enhance the model’s performance.The proposed solution demonstrates an R^(2) score greater than 0.99 in the estimation of both ESR and C.展开更多
This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-preci...This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-precision laser interferometric displacement measurement.A stable power supply module is designed to provide low-noise voltage to the entire circuit.An analog circuit system is constructed,including key circuits such as photoelectric sensors,I-V amplification,zero adjustment,fully differential amplification,and amplitude modulation filtering.To acquire and process signals,the PMAC Acc24E3 data acquisition card is selected,which realizes phase demodulation through reversible square wave counting,inverts displacement information,and a visual interface for the host computer is designed.Experimental verification shows that the designed system achieves micrometer-level measurement accuracy within a range of 0-10mm,with a maximum measurement error of less than 1.2μm,a maximum measurement speed of 6m/s,and a resolution better than 0.158μm.展开更多
Low-voltage direct current(DC)microgrids have recently emerged as a promising and viable alternative to traditional alternating cur-rent(AC)microgrids,offering numerous advantages.Consequently,researchers are explorin...Low-voltage direct current(DC)microgrids have recently emerged as a promising and viable alternative to traditional alternating cur-rent(AC)microgrids,offering numerous advantages.Consequently,researchers are exploring the potential of DC microgrids across var-ious configurations.However,despite the sustainability and accuracy offered by DC microgrids,they pose various challenges when integrated into modern power distribution systems.Among these challenges,fault diagnosis holds significant importance.Rapid fault detection in DC microgrids is essential to maintain stability and ensure an uninterrupted power supply to critical loads.A primary chal-lenge is the lack of standards and guidelines for the protection and safety of DC microgrids,including fault detection,location,and clear-ing procedures for both grid-connected and islanded modes.In response,this study presents a brief overview of various approaches for protecting DC microgrids.展开更多
Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert p...Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert performance.This survey reviews the principal model families as convolutional,recurrent,generative,reinforcement,autoencoder,and transfer-learning approaches as emphasising how their architectural choices map to tasks such as segmentation,classification,reconstruction,and anomaly detection.A dedicated treatment of multimodal fusion networks shows how imaging features can be integrated with genomic profiles and clinical records to yield more robust,context-aware predictions.To support clinical adoption,we outline post-hoc explainability techniques(Grad-CAM,SHAP,LIME)and describe emerging intrinsically interpretable designs that expose decision logic to end users.Regulatory guidance from the U.S.FDA,the European Medicines Agency,and the EU AI Act is summarised,linking transparency and lifecycle-monitoring requirements to concrete development practices.Remaining challenges as data imbalance,computational cost,privacy constraints,and cross-domain generalization are discussed alongside promising solutions such as federated learning,uncertainty quantification,and lightweight 3-D architectures.The article therefore offers researchers,clinicians,and policymakers a concise,practice-oriented roadmap for deploying trustworthy deep-learning systems in healthcare.展开更多
The rapid developing of the fourth generation(4G)wireless communications has aroused tremendous demands for high speed data transmission due to the dissemination of various types of the intelligent user terminals as w...The rapid developing of the fourth generation(4G)wireless communications has aroused tremendous demands for high speed data transmission due to the dissemination of various types of the intelligent user terminals as well as the wireless multi-media services.It is predicted that the network throughput will increase展开更多
Signals from infrared detector are very weak in SO2 concentration measuring system.In order to improve the sensitivity of detection,combining with filter correlation technology and infrared absorption principle,the we...Signals from infrared detector are very weak in SO2 concentration measuring system.In order to improve the sensitivity of detection,combining with filter correlation technology and infrared absorption principle,the weak signal processing circuit is designed according to correlation detection technology.Under laboratory conditions,system performance of SO2 concentration is tested,and the experimental data are analyzed and processed.Then relationship of SO2 concentration and the measuring voltage is provided to prove that the design improves measuring sensitivity of the system.展开更多
Decomposition and reconstruction of Mallat fast wavelet transformation （WT） is described. A fast algorithm, which can greatly decrease the processing burden and can be very easy for hardware implementation in real-t...Decomposition and reconstruction of Mallat fast wavelet transformation （WT） is described. A fast algorithm, which can greatly decrease the processing burden and can be very easy for hardware implementation in real-time, is analyzed. The algorithm will no longer have the processing of decimation and interpolation of usual WT. The formulae of the decomposition and the reconstruction are given. Simulation results of the MEMS （micro-electro mechanical systems） gyroscope drift signal show that the algorithm spends much less processing time to finish the de-noising process than the usual WT. And the de-noising effect is the same. The fast algorithm has been implemented in a TMS320C6713 digital signal processor. The standard variance of the gyroscope static drift signal decreases from 78. 435 5 （°）/h to 36. 763 5 （°）/h. It takes 0. 014 ms to process all input data and can meet the real-time analysis of signal.展开更多
Deep learning(DL) is progressively popular as a viable alternative to traditional signal processing(SP) based methods for fault diagnosis. However, the lack of explainability makes DL-based fault diagnosis methods dif...Deep learning(DL) is progressively popular as a viable alternative to traditional signal processing(SP) based methods for fault diagnosis. However, the lack of explainability makes DL-based fault diagnosis methods difficult to be trusted and understood by industrial users. In addition, the extraction of weak fault features from signals with heavy noise is imperative in industrial applications. To address these limitations, inspired by the Filterbank-Feature-Decision methodology, we propose a new Signal Processing Informed Neural Network(SPINN) framework by embedding SP knowledge into the DL model. As one of the practical implementations for SPINN, a denoising fault-aware wavelet network(DFAWNet) is developed, which consists of fused wavelet convolution(FWConv), dynamic hard thresholding(DHT),index-based soft filtering(ISF), and a classifier. Taking advantage of wavelet transform, FWConv extracts multiscale features while learning wavelet scales and selecting important wavelet bases automatically;DHT dynamically eliminates noise-related components via point-wise hard thresholding;inspired by index-based filtering, ISF optimizes and selects optimal filters for diagnostic feature extraction. It’s worth noting that SPINN may be readily applied to different deep learning networks by simply adding filterbank and feature modules in front. Experiments results demonstrate a significant diagnostic performance improvement over other explainable or denoising deep learning networks. The corresponding code is available at https://github. com/alber tszg/DFAWn et.展开更多
The success of ultrasonic nondestructive testing technology depends not only on the generation and measurement of the desired waveform, but also on the signal processing of the measured waves. The traditional time-dom...The success of ultrasonic nondestructive testing technology depends not only on the generation and measurement of the desired waveform, but also on the signal processing of the measured waves. The traditional time-domain methods have been partly successful in identifying small cracks, but not so successful in estimating crack size, especially in strong backscattering noise. Sparse signal representation can provide sparse information that represents the signal time-frequency signature, which can also be used in processing ultrasonic nondestructive signals. A novel ultrasonic nondestructive signal processing algorithm based on signal sparse representation is proposed. In order to suppress noise, matching pursuit algorithm with Gabor dictionary is selected as the signal decomposition method. Precise echoes information, such as crack location and size, can be estimated by quantitative analysis with Gabor atom. To verify the performance, the proposed algorithm is applied to computer simulation signal and experimental ultrasonic signals which represent multiple backscattered echoes from a thin metal plate with artificial holes. The results show that this algorithm not only has an excellent performance even when dealing with signals in the presence of strong noise, but also is successful in estimating crack location and size. Moreover, the algorithm can be applied to data compression of ultrasonic nondestructive signal.展开更多
Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can ex...Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can extract the potent time-frequency-domain characteristics of signals;however,the performance of conventional characteristics-based classification needs to be improved.Widely used deep learning algorithms(e.g.,convolutional neural networks(CNNs))can conduct classification by extracting high-dimensional data features,with outstanding performance.Hence,combining the advantages of signal processing and deep-learning algorithms can significantly enhance vibration recognition performance.A novel vibration recognition method based on signal processing and deep neural networks is proposed herein.First,environmental vibration signals are collected;then,signal processing is conducted to obtain the coefficient matrices of the time-frequency-domain characteristics using three typical algorithms:the wavelet transform,Hilbert-Huang transform,and Mel frequency cepstral coefficient extraction method.Subsequently,CNNs,long short-term memory(LSTM)networks,and combined deep CNN-LSTM networks are trained for vibration recognition,according to the time-frequencydomain characteristics.Finally,the performance of the trained deep neural networks is evaluated and validated.The results confirm the effectiveness of the proposed vibration recognition method combining signal preprocessing and deep learning.展开更多
Reconfigurable intelligent surface(RIS)is an emerging meta-surface that can provide additional communications links through reflecting the signals,and has been recognized as a strong candidate of 6G mobile communicati...Reconfigurable intelligent surface(RIS)is an emerging meta-surface that can provide additional communications links through reflecting the signals,and has been recognized as a strong candidate of 6G mobile communications systems.Meanwhile,it has been recently admitted that implementing artificial intelligence(AI)into RIS communications will extensively benefit the reconfiguration capacity and enhance the robustness to complicated transmission environments.Besides the conventional model-driven approaches,AI can also deal with the existing signal processing problems in a data-driven manner via digging the inherent characteristic from the real data.Hence,AI is particularly suitable for the signal processing problems over RIS networks under unideal scenarios like modeling mismatching,insufficient resource,hardware impairment,as well as dynamical transmissions.As one of the earliest survey papers,we will introduce the merging of AI and RIS,called AIRIS,over various signal processing topics,including environmental sensing,channel acquisition,beamforming design,and resource scheduling,etc.We will also discuss the challenges of AIRIS and present some interesting future directions.展开更多
The construction of basic wavelet was discussed and many basic analyzing wavelets was compared. Acomplex analyzing wavelet which is continuous, smoothing, orthogonal and exponential decreasing was presented, andit was...The construction of basic wavelet was discussed and many basic analyzing wavelets was compared. Acomplex analyzing wavelet which is continuous, smoothing, orthogonal and exponential decreasing was presented, andit was used to decompose two blasting seismic signals with the continuous wavelet transforms (CWT). The resultshows that wavelet analysis is the better method to help us determine the essential factors which create damage effectsthan Fourier analysis.展开更多
DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other softwar...DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.展开更多
文摘The new type of embedded signal processing system based on the packet switched network is achieved. According to the application field and the-characteristics of signal processing system, the RapidIO protocol is used to solve the high-speed interconnection of multi-digital signal processor （DSP）. Based on this protocol, a kind of crossbar switch module which is used to interconnect multi-DSP in the system is introduced. A route strategy, some flow control rules and error control rules, which adapt to different RapidIO network topology are also introduced. Crossbar switch performance is analyzed in detail by the probability module. By researching the technique of crossbar switch and analyzing the system performance, it has a significant meaning for building the general signal processing system.
基金Sponsored by the National Natural Science Foundation of China (60843005)the Basic Research Foundation of Beijing Institute of Technology(20070142018)
文摘A low-power complementary metal oxide semiconductor（CMOS） operational amplifier （op-amp） for real-time signal processing of micro air vehicle （MAV） is designed in this paper.Traditional folded cascode architecture with positive channel metal oxide semiconductor（PMOS） differential input transistors and sub-threshold technology are applied under the low supply voltage.Simulation results show that this amplifier has significantly low power,while maintaining almost the same gain,bandwidth and other key performances.The power required is only 0.12 mW,which is applicable to low-power and low-voltage real-time signal acquisition and processing system.
文摘Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.
基金supported by the Users with Excellence Program of the Hefei Science Center CAS (No. 2020HSC-UE012)
文摘The neutron count rate fluctuation reaches six orders of magnitude between the ohmic plasma scenario and high power of auxiliary heating on an experimental advanced superconducting tokamak(EAST).The measurement result of neutron flux monitoring(NFM)is a significant feedback parameter related to the acquisition of radiation protection-related information and rapid fluctuations in neutron emission induced by plasma magnetohydrodynamic activity.Therefore,a wide range and high time resolution are required for the NFM system on EAST.To satisfy these requirements,a digital pulse signal acquisition and processing system with a wide dynamic range and fast response time was developed.The present study was conducted using a field-programmable gate array(FPGA)and peripheral component interconnect extension for instrument express(PXIe)platform.The digital dual measurement modes,which are composed of the pulse-counting mode and AC coupled square integral's Campbelling mode,were designed to expand the measurement range of the signal acquisition and processing system.The time resolution of the signal acquisition and processing system was improved from 10 to 1 ms owing to utilizing highspeed analog-to-digital converters(ADCs),a high-speed PXIe communication with a direct memory access(DMA)mode,and online data preprocessing technology of FPGA.The signal acquisition and processing system was tested experimentally in the EAST radiation field.The test results showed that the time resolution of NFM was improved to 1 ms,and the dynamic range of the neutron counts rate was expanded to more than 10^(6) counts per second.The Campbelling mode was calibrated using a multipoint average linear fitting method;subsequently,the fitting coefficient reached 0.9911.Therefore,the newly developed pulse signal acquisition and processing system ensures that the NFM system meets the requirements of high-parameter experiments conducted on EAST more effectively.
基金supported by research grants from NSERC(Canada)agenciesalso partly supported by the National Natural Science Foundation of China(61522509,61377002 and 61090391)+2 种基金Beijing Natural Science Foundation(4152052)the National High-Tech Research and Development Program of China(2015AA017102)M.L.was supported partly by the Thousand Young Talent Program
文摘We propose and demonstrate a reconfigurable and single-shot incoherent optical signal processing system for chirped microwave signal compression, using a programmable optical filter and a multiwavelength laser(MWL). The system is implemented by temporally modulating a specially shaped MWL followed by a suitable linear dispersive medium. A microwave dispersion value up to 1.33 ns/GHz over several GHz bandwidth is achieved based on this approach. Here we demonstrate a singleshot compression for different linearly chirped microwave signals over several GHz bandwidth. In addition, the robustness of the proposed system when input RF signals are largely distorted is also discussed.
基金supported by the National Natural Science Foundation of China(NSFC,no.61701243,71771125)the Major Project of Natural Science Foundation of Jiangsu Education Department(no.19KJA180002).
文摘Depression has become one of the most common mental illnesses in the world.For better prediction and diagnosis,methods of automatic depression recognition based on speech signal are constantly proposed and updated,with a transition from the early traditional methods based on hand‐crafted features to the application of architectures of deep learning.This paper systematically and precisely outlines the most prominent and up‐to‐date research of automatic depression recognition by intelligent speech signal processing so far.Furthermore,methods for acoustic feature extraction,algorithms for classification and regression,as well as end to end deep models are investigated and analysed.Finally,general trends are summarised and key unresolved issues are identified to be considered in future studies of automatic speech depression recognition.
基金Russian Foundation for Basic Research(RFBR)(No.12-02-90425)
文摘On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.
文摘Power converters are essential components in modern life,being widely used in industry,automation,transportation,and household appliances.In many critical applications,their failure can lead not only to financial losses due to operational downtime but also to serious risks to human safety.The capacitors forming the output filter,typically aluminumelectrolytic capacitors(AECs),are among the most critical and susceptible components in power converters.The electrolyte in AECs often evaporates over time,causing the internal resistance to rise and the capacitance to drop,ultimately leading to component failure.Detecting this fault requires measuring the current in the capacitor,rendering the method invasive and frequently impractical due to spatial constraints or operational limitations imposed by the integration of a current sensor in the capacitor branch.This article proposes the implementation of an online noninvasive fault diagnosis technique for estimating the Equivalent Series Resistance(ESR)and Capacitance(C)values of the capacitor,employing a combination of signal processing techniques(SPT)and machine learning(ML)algorithms.This solution relies solely on the converter’s input and output signals,therefore making it a non-invasive approach.The ML algorithm used was linear regression,applied to 27 attributes,21 of which were generated through feature engineering to enhance the model’s performance.The proposed solution demonstrates an R^(2) score greater than 0.99 in the estimation of both ESR and C.
文摘This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-precision laser interferometric displacement measurement.A stable power supply module is designed to provide low-noise voltage to the entire circuit.An analog circuit system is constructed,including key circuits such as photoelectric sensors,I-V amplification,zero adjustment,fully differential amplification,and amplitude modulation filtering.To acquire and process signals,the PMAC Acc24E3 data acquisition card is selected,which realizes phase demodulation through reversible square wave counting,inverts displacement information,and a visual interface for the host computer is designed.Experimental verification shows that the designed system achieves micrometer-level measurement accuracy within a range of 0-10mm,with a maximum measurement error of less than 1.2μm,a maximum measurement speed of 6m/s,and a resolution better than 0.158μm.
文摘Low-voltage direct current(DC)microgrids have recently emerged as a promising and viable alternative to traditional alternating cur-rent(AC)microgrids,offering numerous advantages.Consequently,researchers are exploring the potential of DC microgrids across var-ious configurations.However,despite the sustainability and accuracy offered by DC microgrids,they pose various challenges when integrated into modern power distribution systems.Among these challenges,fault diagnosis holds significant importance.Rapid fault detection in DC microgrids is essential to maintain stability and ensure an uninterrupted power supply to critical loads.A primary chal-lenge is the lack of standards and guidelines for the protection and safety of DC microgrids,including fault detection,location,and clear-ing procedures for both grid-connected and islanded modes.In response,this study presents a brief overview of various approaches for protecting DC microgrids.
基金supported by the Science Committee of the Ministry of Higher Education and Science of the Republic of Kazakhstan within the framework of grant AP23489899“Applying Deep Learning and Neuroimaging Methods for Brain Stroke Diagnosis”.
文摘Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert performance.This survey reviews the principal model families as convolutional,recurrent,generative,reinforcement,autoencoder,and transfer-learning approaches as emphasising how their architectural choices map to tasks such as segmentation,classification,reconstruction,and anomaly detection.A dedicated treatment of multimodal fusion networks shows how imaging features can be integrated with genomic profiles and clinical records to yield more robust,context-aware predictions.To support clinical adoption,we outline post-hoc explainability techniques(Grad-CAM,SHAP,LIME)and describe emerging intrinsically interpretable designs that expose decision logic to end users.Regulatory guidance from the U.S.FDA,the European Medicines Agency,and the EU AI Act is summarised,linking transparency and lifecycle-monitoring requirements to concrete development practices.Remaining challenges as data imbalance,computational cost,privacy constraints,and cross-domain generalization are discussed alongside promising solutions such as federated learning,uncertainty quantification,and lightweight 3-D architectures.The article therefore offers researchers,clinicians,and policymakers a concise,practice-oriented roadmap for deploying trustworthy deep-learning systems in healthcare.
文摘The rapid developing of the fourth generation(4G)wireless communications has aroused tremendous demands for high speed data transmission due to the dissemination of various types of the intelligent user terminals as well as the wireless multi-media services.It is predicted that the network throughput will increase
文摘Signals from infrared detector are very weak in SO2 concentration measuring system.In order to improve the sensitivity of detection,combining with filter correlation technology and infrared absorption principle,the weak signal processing circuit is designed according to correlation detection technology.Under laboratory conditions,system performance of SO2 concentration is tested,and the experimental data are analyzed and processed.Then relationship of SO2 concentration and the measuring voltage is provided to prove that the design improves measuring sensitivity of the system.
基金The National High Technology Research and Devel-opment Program of China (863Program) (No2002AA812038)
文摘Decomposition and reconstruction of Mallat fast wavelet transformation （WT） is described. A fast algorithm, which can greatly decrease the processing burden and can be very easy for hardware implementation in real-time, is analyzed. The algorithm will no longer have the processing of decimation and interpolation of usual WT. The formulae of the decomposition and the reconstruction are given. Simulation results of the MEMS （micro-electro mechanical systems） gyroscope drift signal show that the algorithm spends much less processing time to finish the de-noising process than the usual WT. And the de-noising effect is the same. The fast algorithm has been implemented in a TMS320C6713 digital signal processor. The standard variance of the gyroscope static drift signal decreases from 78. 435 5 （°）/h to 36. 763 5 （°）/h. It takes 0. 014 ms to process all input data and can meet the real-time analysis of signal.
基金National Natural Science Foundation of China (Grant Nos. 51835009, 52105116)China Postdoctoral Science Foundation (Grant Nos. 2021M692557, 2021TQ0263)。
文摘Deep learning(DL) is progressively popular as a viable alternative to traditional signal processing(SP) based methods for fault diagnosis. However, the lack of explainability makes DL-based fault diagnosis methods difficult to be trusted and understood by industrial users. In addition, the extraction of weak fault features from signals with heavy noise is imperative in industrial applications. To address these limitations, inspired by the Filterbank-Feature-Decision methodology, we propose a new Signal Processing Informed Neural Network(SPINN) framework by embedding SP knowledge into the DL model. As one of the practical implementations for SPINN, a denoising fault-aware wavelet network(DFAWNet) is developed, which consists of fused wavelet convolution(FWConv), dynamic hard thresholding(DHT),index-based soft filtering(ISF), and a classifier. Taking advantage of wavelet transform, FWConv extracts multiscale features while learning wavelet scales and selecting important wavelet bases automatically;DHT dynamically eliminates noise-related components via point-wise hard thresholding;inspired by index-based filtering, ISF optimizes and selects optimal filters for diagnostic feature extraction. It’s worth noting that SPINN may be readily applied to different deep learning networks by simply adding filterbank and feature modules in front. Experiments results demonstrate a significant diagnostic performance improvement over other explainable or denoising deep learning networks. The corresponding code is available at https://github. com/alber tszg/DFAWn et.
基金supported by National Natural Science Foundation of China (Grant No. 60672108, Grant No. 60372020)
文摘The success of ultrasonic nondestructive testing technology depends not only on the generation and measurement of the desired waveform, but also on the signal processing of the measured waves. The traditional time-domain methods have been partly successful in identifying small cracks, but not so successful in estimating crack size, especially in strong backscattering noise. Sparse signal representation can provide sparse information that represents the signal time-frequency signature, which can also be used in processing ultrasonic nondestructive signals. A novel ultrasonic nondestructive signal processing algorithm based on signal sparse representation is proposed. In order to suppress noise, matching pursuit algorithm with Gabor dictionary is selected as the signal decomposition method. Precise echoes information, such as crack location and size, can be estimated by quantitative analysis with Gabor atom. To verify the performance, the proposed algorithm is applied to computer simulation signal and experimental ultrasonic signals which represent multiple backscattered echoes from a thin metal plate with artificial holes. The results show that this algorithm not only has an excellent performance even when dealing with signals in the presence of strong noise, but also is successful in estimating crack location and size. Moreover, the algorithm can be applied to data compression of ultrasonic nondestructive signal.
文摘Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can extract the potent time-frequency-domain characteristics of signals;however,the performance of conventional characteristics-based classification needs to be improved.Widely used deep learning algorithms(e.g.,convolutional neural networks(CNNs))can conduct classification by extracting high-dimensional data features,with outstanding performance.Hence,combining the advantages of signal processing and deep-learning algorithms can significantly enhance vibration recognition performance.A novel vibration recognition method based on signal processing and deep neural networks is proposed herein.First,environmental vibration signals are collected;then,signal processing is conducted to obtain the coefficient matrices of the time-frequency-domain characteristics using three typical algorithms:the wavelet transform,Hilbert-Huang transform,and Mel frequency cepstral coefficient extraction method.Subsequently,CNNs,long short-term memory(LSTM)networks,and combined deep CNN-LSTM networks are trained for vibration recognition,according to the time-frequencydomain characteristics.Finally,the performance of the trained deep neural networks is evaluated and validated.The results confirm the effectiveness of the proposed vibration recognition method combining signal preprocessing and deep learning.
基金This work was supported in part by National Key Research and Development Program of China under Grant 2017YFB1010002in part by National Natural Science Foundation of China under Grant 61871455,61831013.
文摘Reconfigurable intelligent surface(RIS)is an emerging meta-surface that can provide additional communications links through reflecting the signals,and has been recognized as a strong candidate of 6G mobile communications systems.Meanwhile,it has been recently admitted that implementing artificial intelligence(AI)into RIS communications will extensively benefit the reconfiguration capacity and enhance the robustness to complicated transmission environments.Besides the conventional model-driven approaches,AI can also deal with the existing signal processing problems in a data-driven manner via digging the inherent characteristic from the real data.Hence,AI is particularly suitable for the signal processing problems over RIS networks under unideal scenarios like modeling mismatching,insufficient resource,hardware impairment,as well as dynamical transmissions.As one of the earliest survey papers,we will introduce the merging of AI and RIS,called AIRIS,over various signal processing topics,including environmental sensing,channel acquisition,beamforming design,and resource scheduling,etc.We will also discuss the challenges of AIRIS and present some interesting future directions.
文摘The construction of basic wavelet was discussed and many basic analyzing wavelets was compared. Acomplex analyzing wavelet which is continuous, smoothing, orthogonal and exponential decreasing was presented, andit was used to decompose two blasting seismic signals with the continuous wavelet transforms (CWT). The resultshows that wavelet analysis is the better method to help us determine the essential factors which create damage effectsthan Fourier analysis.
文摘DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.
