According to the statistical data in the years 2004-2008, both Shift-Share Analysis and Location Quotient Analysis are used to compare the economic development status of counties (districts) in Dingxi City in the year...According to the statistical data in the years 2004-2008, both Shift-Share Analysis and Location Quotient Analysis are used to compare the economic development status of counties (districts) in Dingxi City in the years 2004 and 2008. Advantages and disadvantages of industrial structure and competitiveness are analyzed, as well as the impacts of existing industrial structure on economic growth. Development direction and development focus of primary, secondary and tertiary industries are found out. Countermeasures for accelerating the economic development of counties (districts) in Dingxi City are put forward, such as increasing the inputs in characteristic agriculture, promoting the development of primary industry, speeding up the construction of large and medium industrial enterprises, enhancing the development of secondary industry, strengthening comprehensive environmental improvement in tourist area, and actively developing tertiary industry.展开更多
This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is e...This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.展开更多
Shift-share analysis has been confirmed a useful approach in the study of regional economics and many kinds of extended shift-share models have been advanced and put into practice in economic studies, but few have hit...Shift-share analysis has been confirmed a useful approach in the study of regional economics and many kinds of extended shift-share models have been advanced and put into practice in economic studies, but few have hitherto been introduced and applied to the tourism research in China. Moreover understanding the spatially competitive relationship is of paramount importance for marketers, developers, and planners involved in tourism strategy development. Based on international tourism receipts from 1995 to 2004, this study aims at probing into the spatial competitiveness of interna- tional tourism in Jiangsu Province in comparison with its neighbors by applying a spatially extended shift-share model and a modified dynamic shift-share model. The empirical results illustrate that exceptional years may exist in the ap- plication of dynamic shift-share models. To solve this issue, modifications to dynamic shift-share model are put forward. The analytical results are not only presented but also explained by the comparison of background conditions of tourism development between Jiangsu and its key competitors. The conclusions can be drawn that the growth of international tourism receipts in Jiangsu mainly attributes to the national component and the competitive component and Zhejiang is the most important rival to Jiangsu during the period of 1995-2004. In order to upgrade the tourism competitiveness, it is indispensable for Jiangsu to take proper positioning, promoting and marketing strategies and to cooperate and integrate with its main rivals.展开更多
With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnair...With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnaire covering six dimensions,including public transportation,sanitation and environment,and supporting facility construction,was designed.A total of 208 valid samples were collected,and SPSS was employed for reliability and validity tests as well as IPA analysis.The findings were as follows:①Visitors were generally quite satisfied with the overall public services in Huilongguan Sports and Cultural Park.②The highest satisfaction levels were observed in sanitation and environment services and the sports and cultural atmosphere,while lower satisfaction was noted for supporting facility construction and public information services.③The advantage enhancement zone includes sanitation and environment services and sports and cultural atmosphere;and the continuous maintenance zone includes public transportation services and security management amd maintenance;the subsequent opportunity zone includes supporting facility construction and public information services;and there are no dimensions in the urgent improvement zone.The study recommends strengthening the service connotations from three aspects:enhancing facilities with sports as the core,optimizing services with a people-centered approach,and upgrading the information platform through technological efficiency.Additionally,a multi-stakeholder collaborative mechanism involving the government in coordinating policy resources,the operator in improving implementation efficiency,and the public participating in supervision and evaluation is proposed to drive the enhancement of public service quality at Huilongguan Sports and Cultural Park.展开更多
To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The R...To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The RBM,constructed via eigenvector continuation and trained on both bound and resonant configurations,enables the fast and accurate emulation of resonance properties across the parameter space.To identify the physical resonant states from the emulator’s output,we introduce an overlap-based selection technique that effectively isolates true solutions from background artifacts.By applying this framework to unbound nucleus ^(6)Be,we quantified the model uncertainty in the predicted complex energies.The results demonstrate relative errors of 17.48%in the real part and 8.24%in the imaginary part,while achieving a speedup of four orders of magnitude compared with the full GCC calculations.To further investigate the asymptotic behavior of the resonant-state wavefunctions within the RBM framework,we employed a Lippmann–Schwinger(L–S)-based correction scheme.This approach not only improves the consistency between eigenvalues and wavefunctions but also enables a seamless extension from real-space training data to the complex energy plane.By bridging the gap between bound-state and continuum regimes,the L–S correction significantly enhances the emulator’s capability to accurately capture continuum structures in open quantum systems.展开更多
Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clin...Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clinical data from patients who received treatment in the Department of Orthopedics and the Department of Acupuncture and Moxibustion at our hospital from January 1,2023,to December 31,2023.The study compared the costs of medications,examinations,treatments,laboratory tests,nursing and other expenses,and total treatment costs between the two departments.It analyzed the cost structure of the two departments and proposed further improvement suggestions.Results:The study results indicated that the total costs in the Department of Acupuncture and Moxibustion were significantly higher than those in the Department of Orthopedics.Among medication costs,the total medication costs in the Department of Orthopedics were higher than those in the Department of Acupuncture and Moxibustion,with costs for Western medicine,proprietary Chinese medicine,and herbal medicine all being higher(p<0.05).Regarding examination costs,consultation fees in the Department of Orthopedics were lower than those in the Department of Acupuncture and Moxibustion,while examination costs were higher(p<0.05).In terms of treatment costs,orthopedic treatment and surgical fees were higher than those in the Department of Acupuncture and Moxibustion(p<0.05).For laboratory test costs,orthopedic laboratory fees were significantly higher than those in the Department of Acupuncture and Moxibustion(p<0.05).Among nursing and other expenses,orthopedic blood transfusion,bed fees,and other expenses were higher than those in the Department of Acupuncture and Moxibustion,while nursing fees were lower(p<0.05).Conclusion:Treatment fees in the Department of Acupuncture and Moxibustion are the core and account for a relatively high proportion of the total costs.The benefits generated by the Department of Orthopedics are primarily derived from medication,examination,and laboratory fees,aligning with the characteristics of combining diagnosis,medication,and surgical intervention in orthopedic treatment.Consultation fees,nursing fees,and bed fees in the Department of Acupuncture and Moxibustion are higher than those in the Department of Orthopedics,indicating a longer treatment cycle in acupuncture,which warrants clinical attention.展开更多
The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ...The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ICA-compensation technique to address this limitation and propose a generalized framework for assessing the state of health(SOH)of batteries based on ICA that is applicable under differing charging conditions.This novel approach calculates the voltage profile under quasi-static conditions by subtracting the voltage increase attributable to the additional polarization effects at high currents from the measured voltage profile.This approach's efficacy is contingent upon precisely acquiring the equivalent impedance.To obtain the equivalent impedance throughout the batteries'lifespan while minimizing testing costs,this study employs a current interrupt technique in conjunction with a long short-term memory(LSTM)network to develop a predictive model for equivalent impedance.Following the derivation of ICA curves using voltage profiles under quasi-static conditions,the research explores two scenarios for SOH estimation:one utilizing only incremental capacity(IC)features and the other incorporating both IC features and IC sampling.A genetic algorithm-optimized backpropagation neural network(GABPNN)is employed for the SOH estimation.The proposed generalized framework is validated using independent training and test datasets.Variable test conditions are applied for the test set to rigorously evaluate the methodology under challenging conditions.These evaluation results demonstrate that the proposed framework achieves an estimation accuracy of 1.04%for RMSE and 0.90%for MAPE across a spectrum of charging rates ranging from 0.1 C to 1 C and starting SOCs between 0%and 70%,which constitutes a major advancement compared to established ICA methods.It also significantly enhances the applicability of conventional ICA techniques in varying charging conditions and negates the necessity for separate testing protocols for each charging scenario.展开更多
This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-...This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.展开更多
By using the dynamic shift-share analysis, the industrial structure and competitive strength of 31 provincial districts except Taiwan, Hong Kong and Macao are studied by taking the GDP of the three industries as the r...By using the dynamic shift-share analysis, the industrial structure and competitive strength of 31 provincial districts except Taiwan, Hong Kong and Macao are studied by taking the GDP of the three industries as the research entrance and the whole nation as the reference district. The industrial structure and competitive strength of each provincial district is measured. Through the analysis of pertinence, the correlation degree of industrial structure and industrial competitive strength to economic growth is analyzed. The results show that the industrial competitive strength is closely related to the economic growth of the 31 provincial districts, but the contribution made by the industrial structure to economic growth is insufficient and the effect of industrial structure does not match with that of industrial competitive strength. According to industrial competitiveness and industrial structure effect, 31 provincial districts of the whole nation are divided into 4 types and the relevant countermeasures of the four types are put forward.展开更多
Taking sixteen main fishery production regions as the study objects,this paper is to examine the fishery industrial structure and investigate the correlation between the economic growth of the fishery industry and the...Taking sixteen main fishery production regions as the study objects,this paper is to examine the fishery industrial structure and investigate the correlation between the economic growth of the fishery industry and the fishery industrial structure during the period 1997-2013 by the shift-share analysis. The study results show that( i) four types of regional industrial structure exist in the fishery industry in China;( ii)all the three sectors-fishing production,fish processing( manufacturing) and fish marketing( distribution),have emerged with large potential for promoting the national fishery industry growth,especially for the latter two;( iii) the factors of industry-mix and competitive position have significantly different impacts on the growth of fishery industry in different main fishery production regions. This study is one of the comprehensive studies on the status of regional fishery industrial structure,and the competitiveness of regional fishery industry in China.展开更多
Manufacturing industry is an important symbol which weighs a local economy comprehensive strength and modernized level, and a mighty manufacturing industry is a reliable guarantee which realizes the industry moderniza...Manufacturing industry is an important symbol which weighs a local economy comprehensive strength and modernized level, and a mighty manufacturing industry is a reliable guarantee which realizes the industry modernization. The manufacturing industry in eastern coastal provinces and cities of China, including Shandong, Jiangsu, Zhejiang, Shanghai and Guangdong, holds a quite high proportion, and is competitive. But as to the interior, the manufacturing industry competitiveness of five provinces and cities actually has obviously gradient difference. The concrete profession＆amp;#39;s competitiveness also has the characteristic respectively. This paper analyzes the competitiveness of manufacturing industry in five provinces and cities by the shift-share analysis, obtains a conclusion that Shandong and Zhejiang have the competitive advantage in the traditional manufacturing industry, that Jiangsu＆amp;#39;s and Guangdong＆amp;#39;s competitiveness lies in capital, technology-intensive industry, but that Shanghai manufacturing industry＆amp;#39;s competitive advantage is not obvious, and then proposes strategy to promote the manufacturing industry in the eastern coastal provinces and cities.展开更多
A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring sp...A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring speed on vanadium and chromium extraction were studied. The results suggest that the reaction temperature and KOH-to-ore mass ratio are more influential factors for the extraction of vanadium and chromium. Under the optimal reaction conditions （temperature 180 °C, initial KOH-to-ore mass ratio 4：1, stirring speed 700 r/min, gas flow 1 L/min, and reaction time 300 min）, vanadium and chromium extraction rates can reach up to 95% and 90%, respectively. Kinetics analysis results show that the decomposing process of vanadium slag in KOH sub-molten salt can be well interpreted by the shrinking core model under internal diffusion control. The apparent activation energies for vanadium and chromium are 40.54 and 50.27 kJ/mol, respectively.展开更多
On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engin...On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engine structures, some of the key parts of the engine were analyzed with refined mesh by sub model method and the error of the FEM solution was estimated by the extrapolation method. The example showed that the sub model can not only analyze the comlex structures without the restriction of the software and hardware of the computers, but get the more precise analysis result also. This method is more suitable for the strength analysis of the complex assembly structure.展开更多
We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular...We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.展开更多
In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When...In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When the target geology structure is significantly complicated, these parameters would fail to reflect the nature of the anomaly source, and wrong conclusions may be obtained. A wavelet approach and a metal factor method were used to comprehensively interpret the induced polarization anomaly of complex geologic bodies in the Adi Bladia mine. Db5 wavelet basis was used to conduct two-scale decomposition and reconstruction, which effectively suppress the noise interference of greenschist facies regional metamorphism and magma intrusion, making energy concentrated and boundary problem unobservable. On the basis of that, the ore-induced anomaly was effectively extracted by the metal factor method.展开更多
An h-adaptivity analysis scheme based on multiple scale reproducing kernel particle method was proposed, and two node refinement strategies were constructed using searching-neighbor-nodes(SNN) and local-Delaunay-trian...An h-adaptivity analysis scheme based on multiple scale reproducing kernel particle method was proposed, and two node refinement strategies were constructed using searching-neighbor-nodes(SNN) and local-Delaunay-triangulation(LDT) tech-niques, which were suitable and effective for h-adaptivity analysis on 2-D problems with the regular or irregular distribution of the nodes. The results of multiresolution and h-adaptivity analyses on 2-D linear elastostatics and bending plate problems demonstrate that the improper high-gradient indicator will reduce the convergence property of the h-adaptivity analysis, and that the efficiency of the LDT node refinement strategy is better than SNN, and that the presented h-adaptivity analysis scheme is provided with the validity, stability and good convergence property.展开更多
ln this study, 12 maize populations were improved with the improved S1 selection method, aiming to increase the improvement efficiency of maize popula-tions. The results showed that number of rows per spike, number of...ln this study, 12 maize populations were improved with the improved S1 selection method, aiming to increase the improvement efficiency of maize popula-tions. The results showed that number of rows per spike, number of grains per row and 100-grain weight were the three important component traits of maize yield. The highest genetic increment was found in Mengqun 2, fol owed by Mengqun 4, Mengqun 1 and other 7 maize populations. Negative genetic increment was shown in Mengqun 3 and 3 introduced foreign maize populations. Some changes were shown in spikes, plant traits and genetic diversity of maize populations. Based on our results, we concluded that Mengqun 2, Mengqun 4, Zhongzong 7, Mengqun C and Mengqun A could be directly used for the line breeding by selfing for their higher genetic increment of yield and better improvement effects of other agricultural traits. Compared with these 5 populations, the improvement potential of other maize populations was limited for their lower genetic increment.展开更多
[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant mater...[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.展开更多
Contact bounce of relay, which is the main cause of electric abrasion and material erosion, is inevitable. By using the mode expansion form, the dynamic behavior of two different reed systems for aerospace relays is a...Contact bounce of relay, which is the main cause of electric abrasion and material erosion, is inevitable. By using the mode expansion form, the dynamic behavior of two different reed systems for aerospace relays is analyzed. The dynamic model uses Euler-Bernoulli beam theory for cantilever beam, in which the driving force (or driving moment) of the electromagnetic system is taken into account, and the contact force between moving contact and stationary contact is simulated by the Kelvin-Voigt vis-coelastic...展开更多
The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyz...The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyzed and on the basis of domestic and overseas design codes of steel structures,the corresponding simplified analysis methods are put forward for the engineering design or code revision.It is proved that the simplified methods are safe,efficient and practicable through the comparison between several results.展开更多
基金Supported by the National Natural Science Foundation of China(40871061)
文摘According to the statistical data in the years 2004-2008, both Shift-Share Analysis and Location Quotient Analysis are used to compare the economic development status of counties (districts) in Dingxi City in the years 2004 and 2008. Advantages and disadvantages of industrial structure and competitiveness are analyzed, as well as the impacts of existing industrial structure on economic growth. Development direction and development focus of primary, secondary and tertiary industries are found out. Countermeasures for accelerating the economic development of counties (districts) in Dingxi City are put forward, such as increasing the inputs in characteristic agriculture, promoting the development of primary industry, speeding up the construction of large and medium industrial enterprises, enhancing the development of secondary industry, strengthening comprehensive environmental improvement in tourist area, and actively developing tertiary industry.
基金supported by the National Natural Science Foundation of China(Grant Nos.51890912,51979025 and 52011530189).
文摘This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.
基金Under the auspices of the National Natural Science Foundation of China (No. 40371030)
文摘Shift-share analysis has been confirmed a useful approach in the study of regional economics and many kinds of extended shift-share models have been advanced and put into practice in economic studies, but few have hitherto been introduced and applied to the tourism research in China. Moreover understanding the spatially competitive relationship is of paramount importance for marketers, developers, and planners involved in tourism strategy development. Based on international tourism receipts from 1995 to 2004, this study aims at probing into the spatial competitiveness of interna- tional tourism in Jiangsu Province in comparison with its neighbors by applying a spatially extended shift-share model and a modified dynamic shift-share model. The empirical results illustrate that exceptional years may exist in the ap- plication of dynamic shift-share models. To solve this issue, modifications to dynamic shift-share model are put forward. The analytical results are not only presented but also explained by the comparison of background conditions of tourism development between Jiangsu and its key competitors. The conclusions can be drawn that the growth of international tourism receipts in Jiangsu mainly attributes to the national component and the competitive component and Zhejiang is the most important rival to Jiangsu during the period of 1995-2004. In order to upgrade the tourism competitiveness, it is indispensable for Jiangsu to take proper positioning, promoting and marketing strategies and to cooperate and integrate with its main rivals.
基金Sponsored by The Youth Project of National Social Science Foundation of China(21CTY007)Special Fund for Basic Scientific Research Business Expenses of Central Universities(2024DAWH008).
文摘With Beijing Huilongguan Sports and Cultural Park as the research object,this study was conducted to investigate public service satisfaction in the park by the Importance-Performance Analysis(IPA)method.A questionnaire covering six dimensions,including public transportation,sanitation and environment,and supporting facility construction,was designed.A total of 208 valid samples were collected,and SPSS was employed for reliability and validity tests as well as IPA analysis.The findings were as follows:①Visitors were generally quite satisfied with the overall public services in Huilongguan Sports and Cultural Park.②The highest satisfaction levels were observed in sanitation and environment services and the sports and cultural atmosphere,while lower satisfaction was noted for supporting facility construction and public information services.③The advantage enhancement zone includes sanitation and environment services and sports and cultural atmosphere;and the continuous maintenance zone includes public transportation services and security management amd maintenance;the subsequent opportunity zone includes supporting facility construction and public information services;and there are no dimensions in the urgent improvement zone.The study recommends strengthening the service connotations from three aspects:enhancing facilities with sports as the core,optimizing services with a people-centered approach,and upgrading the information platform through technological efficiency.Additionally,a multi-stakeholder collaborative mechanism involving the government in coordinating policy resources,the operator in improving implementation efficiency,and the public participating in supervision and evaluation is proposed to drive the enhancement of public service quality at Huilongguan Sports and Cultural Park.
基金supported by the National Key Research and Development Program(MOST 2023YFA1606404 and MOST 2022YFA1602303)the National Natural Science Foundation of China(Nos.12347106,12147101,and 12447122)the China Postdoctoral Science Foundation(No.2024M760489).
文摘To study the uncertainty quantification of resonant states in open quantum systems,we developed a Bayesian framework by integrating a reduced basis method(RBM)emulator with the Gamow coupled-channel(GCC)approach.The RBM,constructed via eigenvector continuation and trained on both bound and resonant configurations,enables the fast and accurate emulation of resonance properties across the parameter space.To identify the physical resonant states from the emulator’s output,we introduce an overlap-based selection technique that effectively isolates true solutions from background artifacts.By applying this framework to unbound nucleus ^(6)Be,we quantified the model uncertainty in the predicted complex energies.The results demonstrate relative errors of 17.48%in the real part and 8.24%in the imaginary part,while achieving a speedup of four orders of magnitude compared with the full GCC calculations.To further investigate the asymptotic behavior of the resonant-state wavefunctions within the RBM framework,we employed a Lippmann–Schwinger(L–S)-based correction scheme.This approach not only improves the consistency between eigenvalues and wavefunctions but also enables a seamless extension from real-space training data to the complex energy plane.By bridging the gap between bound-state and continuum regimes,the L–S correction significantly enhances the emulator’s capability to accurately capture continuum structures in open quantum systems.
文摘Objective:This study aims to explore the benefit analysis of the same disease in different departments of public hospitals under the DIP payment method.Methods:This study is a retrospective analysis that selected clinical data from patients who received treatment in the Department of Orthopedics and the Department of Acupuncture and Moxibustion at our hospital from January 1,2023,to December 31,2023.The study compared the costs of medications,examinations,treatments,laboratory tests,nursing and other expenses,and total treatment costs between the two departments.It analyzed the cost structure of the two departments and proposed further improvement suggestions.Results:The study results indicated that the total costs in the Department of Acupuncture and Moxibustion were significantly higher than those in the Department of Orthopedics.Among medication costs,the total medication costs in the Department of Orthopedics were higher than those in the Department of Acupuncture and Moxibustion,with costs for Western medicine,proprietary Chinese medicine,and herbal medicine all being higher(p<0.05).Regarding examination costs,consultation fees in the Department of Orthopedics were lower than those in the Department of Acupuncture and Moxibustion,while examination costs were higher(p<0.05).In terms of treatment costs,orthopedic treatment and surgical fees were higher than those in the Department of Acupuncture and Moxibustion(p<0.05).For laboratory test costs,orthopedic laboratory fees were significantly higher than those in the Department of Acupuncture and Moxibustion(p<0.05).Among nursing and other expenses,orthopedic blood transfusion,bed fees,and other expenses were higher than those in the Department of Acupuncture and Moxibustion,while nursing fees were lower(p<0.05).Conclusion:Treatment fees in the Department of Acupuncture and Moxibustion are the core and account for a relatively high proportion of the total costs.The benefits generated by the Department of Orthopedics are primarily derived from medication,examination,and laboratory fees,aligning with the characteristics of combining diagnosis,medication,and surgical intervention in orthopedic treatment.Consultation fees,nursing fees,and bed fees in the Department of Acupuncture and Moxibustion are higher than those in the Department of Orthopedics,indicating a longer treatment cycle in acupuncture,which warrants clinical attention.
基金funded by the Bavarian State Ministry of ScienceResearch and Art(Grant number:H.2-F1116.WE/52/2)。
文摘The incremental capacity analysis(ICA)technique is notably limited by its sensitivity to variations in charging conditions,which constrains its practical applicability in real-world scenarios.This paper introduces an ICA-compensation technique to address this limitation and propose a generalized framework for assessing the state of health(SOH)of batteries based on ICA that is applicable under differing charging conditions.This novel approach calculates the voltage profile under quasi-static conditions by subtracting the voltage increase attributable to the additional polarization effects at high currents from the measured voltage profile.This approach's efficacy is contingent upon precisely acquiring the equivalent impedance.To obtain the equivalent impedance throughout the batteries'lifespan while minimizing testing costs,this study employs a current interrupt technique in conjunction with a long short-term memory(LSTM)network to develop a predictive model for equivalent impedance.Following the derivation of ICA curves using voltage profiles under quasi-static conditions,the research explores two scenarios for SOH estimation:one utilizing only incremental capacity(IC)features and the other incorporating both IC features and IC sampling.A genetic algorithm-optimized backpropagation neural network(GABPNN)is employed for the SOH estimation.The proposed generalized framework is validated using independent training and test datasets.Variable test conditions are applied for the test set to rigorously evaluate the methodology under challenging conditions.These evaluation results demonstrate that the proposed framework achieves an estimation accuracy of 1.04%for RMSE and 0.90%for MAPE across a spectrum of charging rates ranging from 0.1 C to 1 C and starting SOCs between 0%and 70%,which constitutes a major advancement compared to established ICA methods.It also significantly enhances the applicability of conventional ICA techniques in varying charging conditions and negates the necessity for separate testing protocols for each charging scenario.
基金support from the National Natural Science Foundation of China(Grant Nos.52174123&52274222).
文摘This paper presents a framework for constructing surrogate models for sensitivity analysis of structural dynamics behavior.Physical models involving deformation,such as collisions,vibrations,and penetration,are devel-oped using the material point method.To reduce the computational cost of Monte Carlo simulations,response surface models are created as surrogate models for the material point system to approximate its dynamic behavior.An adaptive randomized greedy algorithm is employed to construct a sparse polynomial chaos expansion model with a fixed order,effectively balancing the accuracy and computational efficiency of the surrogate model.Based on the sparse polynomial chaos expansion,sensitivity analysis is conducted using the global finite difference and Sobol methods.Several examples of structural dynamics are provided to demonstrate the effectiveness of the proposed method in addressing structural dynamics problems.
文摘By using the dynamic shift-share analysis, the industrial structure and competitive strength of 31 provincial districts except Taiwan, Hong Kong and Macao are studied by taking the GDP of the three industries as the research entrance and the whole nation as the reference district. The industrial structure and competitive strength of each provincial district is measured. Through the analysis of pertinence, the correlation degree of industrial structure and industrial competitive strength to economic growth is analyzed. The results show that the industrial competitive strength is closely related to the economic growth of the 31 provincial districts, but the contribution made by the industrial structure to economic growth is insufficient and the effect of industrial structure does not match with that of industrial competitive strength. According to industrial competitiveness and industrial structure effect, 31 provincial districts of the whole nation are divided into 4 types and the relevant countermeasures of the four types are put forward.
基金Supported by National Natural Science Foundation of China(71503131)Humanity and Social Science Foundation of Ministry of Education of China(14YJC790088)
文摘Taking sixteen main fishery production regions as the study objects,this paper is to examine the fishery industrial structure and investigate the correlation between the economic growth of the fishery industry and the fishery industrial structure during the period 1997-2013 by the shift-share analysis. The study results show that( i) four types of regional industrial structure exist in the fishery industry in China;( ii)all the three sectors-fishing production,fish processing( manufacturing) and fish marketing( distribution),have emerged with large potential for promoting the national fishery industry growth,especially for the latter two;( iii) the factors of industry-mix and competitive position have significantly different impacts on the growth of fishery industry in different main fishery production regions. This study is one of the comprehensive studies on the status of regional fishery industrial structure,and the competitiveness of regional fishery industry in China.
文摘Manufacturing industry is an important symbol which weighs a local economy comprehensive strength and modernized level, and a mighty manufacturing industry is a reliable guarantee which realizes the industry modernization. The manufacturing industry in eastern coastal provinces and cities of China, including Shandong, Jiangsu, Zhejiang, Shanghai and Guangdong, holds a quite high proportion, and is competitive. But as to the interior, the manufacturing industry competitiveness of five provinces and cities actually has obviously gradient difference. The concrete profession＆amp;#39;s competitiveness also has the characteristic respectively. This paper analyzes the competitiveness of manufacturing industry in five provinces and cities by the shift-share analysis, obtains a conclusion that Shandong and Zhejiang have the competitive advantage in the traditional manufacturing industry, that Jiangsu＆amp;#39;s and Guangdong＆amp;#39;s competitiveness lies in capital, technology-intensive industry, but that Shanghai manufacturing industry＆amp;#39;s competitive advantage is not obvious, and then proposes strategy to promote the manufacturing industry in the eastern coastal provinces and cities.
基金Project(2013CB632605)supported by the National Basic Research Development Program of ChinaProjects(51274178,51274179)supported by the National Natural Science Foundation of China
文摘A novel process was developed for the decomposition of vanadium slag using KOH sub-molten salt under ambient pressure, and the effects of reaction temperature, alkali-to-ore mass ratios, particle size, and stirring speed on vanadium and chromium extraction were studied. The results suggest that the reaction temperature and KOH-to-ore mass ratio are more influential factors for the extraction of vanadium and chromium. Under the optimal reaction conditions （temperature 180 °C, initial KOH-to-ore mass ratio 4：1, stirring speed 700 r/min, gas flow 1 L/min, and reaction time 300 min）, vanadium and chromium extraction rates can reach up to 95% and 90%, respectively. Kinetics analysis results show that the decomposing process of vanadium slag in KOH sub-molten salt can be well interpreted by the shrinking core model under internal diffusion control. The apparent activation energies for vanadium and chromium are 40.54 and 50.27 kJ/mol, respectively.
文摘On the basis of introducing the fundamental theory and the basic analysis steps of the sub model method, the strength of the new engine complex assembly structure was analyzed according to the properties of the engine structures, some of the key parts of the engine were analyzed with refined mesh by sub model method and the error of the FEM solution was estimated by the extrapolation method. The example showed that the sub model can not only analyze the comlex structures without the restriction of the software and hardware of the computers, but get the more precise analysis result also. This method is more suitable for the strength analysis of the complex assembly structure.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China(No.41304082)the China Postdoctoral Science Foundation(No.2016M590731)+2 种基金the Young Scientists Fund of the Natural Science Foundation of Hebei Province(No.D2014403011)the Program for Young Excellent Talents of Higher Education Institutions of Hebei Province(No.BJ2016046)the Geological survey project of China Geological Survey(No.1212011121197)
文摘We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.
基金Project(41174103)supported by the National Natural Science Foundation of ChinaProject(2010-211)supported by the Foreign Mineral Resources Venture Exploration Special Fund of China
文摘In mineral exploration, the apparent resistivity and apparent frequency （or apparent polarizability） parameters of induced polarization method are commonly utilized to describe the induced polarization anomaly. When the target geology structure is significantly complicated, these parameters would fail to reflect the nature of the anomaly source, and wrong conclusions may be obtained. A wavelet approach and a metal factor method were used to comprehensively interpret the induced polarization anomaly of complex geologic bodies in the Adi Bladia mine. Db5 wavelet basis was used to conduct two-scale decomposition and reconstruction, which effectively suppress the noise interference of greenschist facies regional metamorphism and magma intrusion, making energy concentrated and boundary problem unobservable. On the basis of that, the ore-induced anomaly was effectively extracted by the metal factor method.
基金Project supported by the National Natural Science Foundation of China (No.10202018)
文摘An h-adaptivity analysis scheme based on multiple scale reproducing kernel particle method was proposed, and two node refinement strategies were constructed using searching-neighbor-nodes(SNN) and local-Delaunay-triangulation(LDT) tech-niques, which were suitable and effective for h-adaptivity analysis on 2-D problems with the regular or irregular distribution of the nodes. The results of multiresolution and h-adaptivity analyses on 2-D linear elastostatics and bending plate problems demonstrate that the improper high-gradient indicator will reduce the convergence property of the h-adaptivity analysis, and that the efficiency of the LDT node refinement strategy is better than SNN, and that the presented h-adaptivity analysis scheme is provided with the validity, stability and good convergence property.
基金Supported by Science and Technology Innovation Guiding and Incentive Fund of Inner Mongolia Autonomous Region(20111705)~~
文摘ln this study, 12 maize populations were improved with the improved S1 selection method, aiming to increase the improvement efficiency of maize popula-tions. The results showed that number of rows per spike, number of grains per row and 100-grain weight were the three important component traits of maize yield. The highest genetic increment was found in Mengqun 2, fol owed by Mengqun 4, Mengqun 1 and other 7 maize populations. Negative genetic increment was shown in Mengqun 3 and 3 introduced foreign maize populations. Some changes were shown in spikes, plant traits and genetic diversity of maize populations. Based on our results, we concluded that Mengqun 2, Mengqun 4, Zhongzong 7, Mengqun C and Mengqun A could be directly used for the line breeding by selfing for their higher genetic increment of yield and better improvement effects of other agricultural traits. Compared with these 5 populations, the improvement potential of other maize populations was limited for their lower genetic increment.
基金Supported by National Natural Science Foundation of China(30770124)~~
文摘[Objective] The research aimed to study a paraffin method without using the microtome,and also introduced an analysis method for optical information of the plant anatomical digital photographs.[Method] The plant material softened or not was embedded in paraffin according to the paraffin method.Cut the thin paraffin sections from the paraffin block with a sharp two-sided blade under anatomical lens.The thin material sections rolled up when they were cut off.Took the section rolls to a slide,and then heated them to melt the paraffin section roll.When the paraffin melted,the sections of plant material were rolled out.After the common or simplified procedures of staining and mounting,the preparations were finished.When an anatomical digital photograph was processed,copy it into the word file and two copies of the original photograph were obtained.One copy was selected to make it to be a negative photograph,and then press the key ＂Press Screen＂ to copy the screen frame.After it was copied into the word file,cut of the unnecessary parts and other operations were carried out,then processed photograph was obtained.[Results] The anatomical preparation for research was gotten.The analyzed digital photograph of the leaf structure of Salix matsudana var.matsudana f.tortuosa has some a three-dimensional effect,and the different leaf structures and cells,e.g.cuticle,cell wall,protoplast,vein,etc.can be identified easily.[Conclusion]The paraffin method without using the microtome has advantages of low cost and higher efficiency,which could be applied by the beginner or in the time without a microtome to be used.The analysis of the plant anatomical digital photographs can acquire more structural information than the original digital photographs,which shows the potentiality and prospects of the optical information analysis of the microscopic imagery and its digital photograph.
文摘Contact bounce of relay, which is the main cause of electric abrasion and material erosion, is inevitable. By using the mode expansion form, the dynamic behavior of two different reed systems for aerospace relays is analyzed. The dynamic model uses Euler-Bernoulli beam theory for cantilever beam, in which the driving force (or driving moment) of the electromagnetic system is taken into account, and the contact force between moving contact and stationary contact is simulated by the Kelvin-Voigt vis-coelastic...
基金Supported by Ministry of Metallurgical Industry of China
文摘The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyzed and on the basis of domestic and overseas design codes of steel structures,the corresponding simplified analysis methods are put forward for the engineering design or code revision.It is proved that the simplified methods are safe,efficient and practicable through the comparison between several results.
