The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D i...The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.展开更多
The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement...The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the...Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the shielding effectiveness of the composite structure.Firstly,the effect of the pyrolysis temperature on the shielding effectiveness of biochar was investigated.Secondly,biochars combined with YIG nanocrystals with different contents and shielding effectiveness of the composites were investigated.The electromagnetic effectiveness of the samples was investigated within the X band(8-12 GHz).The findings indicate that biochar demonstrates enhanced absorption properties with elevated pyrolysis temperatures.Biochars demonstrated an approximate 40 d B shielding effectiveness,while YIG exhibited approximately 7 d B,corresponding to absorption at 8 GHz.However,the combination of biochar and YIG exhibited exceptional absorption,reaching 67.12 d B at 8 GHz.展开更多
With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption ar...With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.展开更多
To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding ...To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.展开更多
Cross-band camouflage technology is a critical necessity,enabling personnel and equipment to evade detection across evolving surveillance systems,thereby enhancing survivability and mission success.Herein,this work de...Cross-band camouflage technology is a critical necessity,enabling personnel and equipment to evade detection across evolving surveillance systems,thereby enhancing survivability and mission success.Herein,this work develops a layer-structured composite system based on carbon nanotube(CNT)film comprising ionic liquid(IL)interlayer for infrared(IR)modulation and surface-engineered Cu_(2)O nanoparticles for visible camouflage.The CNT/IL/CNT architecture enables reversible IR emissivity switching(Δε≈0.55)through electrically driven ion intercalation/deintercalation within 2 s,while spray-coated Cu_(2)O nanoparticles(100~400 nm diameter)on the top CNT film layer generate rich structure colors with 90%IR transmittance.This spectral-decoupling design overcomes the traditional trade-off between color visibility and IR transmittance observed in pigment-based systems.Remarkably,due to physical interface coupling,the Cu_(2)O-coated layer-structured system maintains exceptional electrical conductivity,enabling simultaneous electromagnetic interference shielding and electrothermal energy conversion.The integrated system demonstrates long-term operational stability.By unifying visible-IR camouflage,electromagnetic protection,and energy management in a lightweight platform,this work provides an important paradigm for cross-band camouflage technologies.展开更多
Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication,...Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.展开更多
Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and...Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.展开更多
Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fif...Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.展开更多
High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polym...High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polymer/MXene nanocom-posites remains challenging owing to the limited flame-retardant properties of MXene itself.This study prepared a novel MXene@Ag@PA hybrid material via radiation modification and complexation reaction.This material was used to further enhance the key properties of ethylene-vinyl acetate(EVA),such as its mechanical properties,thermal conductivity,flame retardancy,and electromagnetic shielding.The addition of two parts of this hybrid material increased the thermal conduc-tivity of EVA by 44.2%and reduced its peak exothermic rate during combustion by 30.1%compared with pure EVA.The material also significantly reduced smoke production and increased the residue content.In the X-band,the electromagnetic shielding effectiveness of the EVA composites reached 20 dB.Moreover,the MXene@Ag@PA hybrid material could be used to further enhance the mechanical properties of EVA composites under electron-beam irradiation.Thus,this study contributes to the development of MXene-based EVA advanced materials that are fire-safe,have high strength,and exhibit good electromagnetic shielding performance for various applications.展开更多
The performances of magnesium alloys remain insufficient to further enhance the application potential of ultralight magnesium alloys.In this work,a Mg-8Li-3Y-2Zn alloy was prepared through vacuum melting and subsequent...The performances of magnesium alloys remain insufficient to further enhance the application potential of ultralight magnesium alloys.In this work,a Mg-8Li-3Y-2Zn alloy was prepared through vacuum melting and subsequent heat treatment at 300,450,and 500°C.The material properties of the resulting samples were assessed through microstructural observation,tensile testing,electrical conductivity measurements,and electromagnetic shielding effectiveness(EMI-SE)testing.The influence of the Mg-8Li-3Y-2Zn alloy microstructure on its mechanical and electromagnetic shielding properties in different states was investigated.It was found that the as-cast alloy containsα-Mg,β-Li,Mg_(3)Zn_(3)Y_(2),and Mg_(12)ZnY phases.Following heat treatment at 500℃(HT500),the blockα-Mg phase transformedfine needle-shapes,its tensile strength increased to 263.7 MPa,and its elongation reached 45.3%.The mechanical properties of the alloy were significantly improved by the synergistic effects imparted by the needle-shapedα-Mg phase,solid solution strengthening,and precipitation strengthening.The addition of Y and Zn improved the EMI-SE of Mg-8Li-1Zn alloy,wherein the HT500 sample exhibits the highest SE,maintaining a value of 106.7–76.9 dB in the frequency range of 30–4500 MHz;this performance has rarely been reported for electromagnetically shielded alloys.This effect was mainly attributed to the multiple reflections of electromagnetic waves caused by the severe impedance mismatch of the abundant phase boundaries,which were in turn provided by the dual-phase(α/β)and secondary phases.Furthermore,the presence of nano-precipitation was also believed to enhance the absorption of electromagnetic waves.展开更多
Designing and fabricating a compatible low-reflectivity electromagnetic interference(EMI)shielding/high-temperature resistant infrared stealth material possesses a critical significance in the field of military.Hence,...Designing and fabricating a compatible low-reflectivity electromagnetic interference(EMI)shielding/high-temperature resistant infrared stealth material possesses a critical significance in the field of military.Hence,a hierarchical polyimide(PI)nonwoven fabric is fabricated by alkali treatment,in-situ growth of magnetic particles and"self-activated"electroless Ag plating process.Especially,the hierarchical impedance matching can be constructed by systematically assembling Fe_(3)O_(4)/Ag-loaded PI nonwoven fabric(PFA)and pure Ag-coated PI nonwoven fabric(PA),endowing it with an ultralowreflectivity EMI shielding performance.In addition,thermal insulation of fluffy three-dimensional(3D)space structure in PFA and low infrared emissivity of PA originated from Ag plating bring an excellent infrared stealth performance.More importantly,the strong bonding interaction between Fe_(3)O_(4),Ag,and PI fiber improves thermal stability in EMI shielding and high-temperature resistant infrared stealth performance.Such excellent comprehensive performance makes it promising for military tents to protect internal equipment from electromagnetic interference stemmed from adjacent equipment and/or enemy,and inhibit external infrared detection.展开更多
With the wide application of electromagnetic wave,a high performance electromagnetic shielding material is urgently needed to solve the harm caused by electromagnetic wave.Complete cross-linking strategy is adopted in...With the wide application of electromagnetic wave,a high performance electromagnetic shielding material is urgently needed to solve the harm caused by electromagnetic wave.Complete cross-linking strategy is adopted in this paper.Polyacrylamide(PAM)was synthesized by in-situ polymerization of acrylamide(AM)monomer.The obtained PAM was blended with polyethylene glycol(PEG)to prepare PAM/PEG hydrogels and form rigid support structures.Subsequently,the modified carbon nanotubes(S-CNTs)were incorpor-ated into sodium alginate(SA)and PAM/PEG.Finally,Na+was used to trigger SA self-assembly,which significantly improved the mechanical properties and electrical conductivity of the hydrogels,and prepared PAM/PEG/SA/S-CNTs-Na hydrogels with high tough-ness and strong electromagnetic interference(EMI)shielding efficiency(SE).The results showed that the compressive strength of PAM/PEG/SA/S-CNTs-Na hydrogel was 19.05 MPa,which was 7.69%higher than that of PAM/PEG hydrogel(17.69 MPa).More en-couraging,the average EMI SE of PAM/PEG/SA/S-CNTs-Na hydrogels at a thickness of only 3 mm and a CNTs content of 16.53wt%was 32.92 dB,which is 113.21%higher than that of PAM/PEG hydrogels(15.44 dB).展开更多
Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight natur...Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight nature. These characteristics make them ideal for applications in vibration damping, heat insulation and weight reduction. In recent years, there has been increasing interest in the application of interfering energy conversion such as electromagnetic wave (EMW) and sound, where the metal foams could emerge as a solution. This paper will present a comprehensive review of the preparation methods as well as the interference energy converting mechanisms for metal foams. Typically, the progress and prospective aspects of metal foams for EMW absorption, electromagnetic interference (EMI) shielding and sound absorption have been emphasized. Through this review, we aspire to offer valuable insights for the development of multifunctional applications with metal foam materials.展开更多
As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal...As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.展开更多
The construction of hierarchical thermoplastic polyurethane(TPU)composites with superior flame retardant and electromagnetic shielding capabilities hold significant practical importance.In this work,TPU composites loa...The construction of hierarchical thermoplastic polyurethane(TPU)composites with superior flame retardant and electromagnetic shielding capabilities hold significant practical importance.In this work,TPU composites loaded with a multilayer core-shell flame retardant(APP@CoAl-LDH@Si)and a modified conductive nanofiller(MWCNT-NH_(2)-PA)were firstly prepared through the melt blending method,acting as surface layer.Additionally,multilayered MXene films functionalized by bacterial cellulose(BC)and dopamine hydrochloride(DA)were fabricated via a facile and efficient vacuum filtration approach.Finally,a PBM film was utilized as an intermediate layer to construct hierarchical TPU composites.The results indicated that the introduction of 10 wt%APP@CoAl-LDH@Si hybrid,the peak heat release rate,total heat release,peak smoke production rate,and total smoke release of the TPU composites were decreased by 83.0%,61.3%,48.5%and 66.9%,respectively,compared with those of pure TPU due to the free radicals capture effect of APP,and the flame-retardant functions of LDH and silane.Moreover,the hierarchical TPU/APP@CoAl-LDH@Si/CP1-PBM exhibited excellent electromagnetic shielding performance,achieving 43.6 dB in the X-band because of multiple reflection losses,interface polarization losses,and charge carrier movement-induced thermal dissipation.Extraordinarily,the A and R coefficients were reversed in the X and K bands.This phenomenon was attributed to the different degrees of confinement of the multilayer structure to electromagnetic waves with different wavelengths.This work presents a novel model for the design and preparation of high-performance polymer composites with multiple properties and regulation mechanism.展开更多
Electromagnetic interference(EMI)shielding materials with adaptive strain capability have broad applications in wearable electronic devices.However,as an important candidate,compressible conductive foam generally suff...Electromagnetic interference(EMI)shielding materials with adaptive strain capability have broad applications in wearable electronic devices.However,as an important candidate,compressible conductive foam generally suffers from a reduction in EMI shielding performance during compression,which limits its application.Here,a compressible conductive aerogel with a unique conductive compensation effect is designed to solve this problem.CuS microspheres with metal-like conductivity serve as conductive compensation sites,and are chemically embedded in the skeletons of lamellar-structured carboxymethylcellulose(CMC)/MXene aerogel through Cu–S−Ti−C chemical bonds.The incorporation of CuS induces circularly-distributed interfacial polarization to enhance the attenuation of EM waves.More importantly,these CuS microspheres act as interlayer bridges to connect the upper and lower MXene/CMC layers during compression,thereby establishing numerous conductive compensation paths to offset the negative effect of thickness reduction on shielding performance.The optimized CMC/MXene/CuS aerogel shows stable EMI shielding performance during compression,and maintains a high shielding effectiveness of∼32.31 dB with increasing compressive strain.In addition,this composite aerogel exhibits good thermal insulation and sound absorption performances,achieving triple shielding functions against EM waves,heat and sound.展开更多
As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films play a pivotal role in 5 G communication technology,smart wearables,automotive electronics,and aerospace.In this work,(...Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films play a pivotal role in 5 G communication technology,smart wearables,automotive electronics,and aerospace.In this work,(Ti_(3)C_(2)T_(x) MXene/cellulose nanofibers(CNF)-(hydroxy‑functionalized BNNS(BNNS-OH)/CNF)composite films(TBCF)with Janus structure are prepared via vacuum-assisted filtration of BNNS-OH/CNF and Ti_(3)C_(2)T_(x)/CNF suspension by one after another.Then ionic bonding-strengthened TBCF(ITBCF)is obtained by Ca^(2+)ion infiltration and cold-pressing technique.The Janus structure endows ITBCF with the unique“conductive on one side and insulating on the other”property.When the mass ratio of Ti_(3)C_(2)T_(x) and BNNS is 1:1 and the total mass fraction is 70 wt.%,the electrical conductivity(σ)of the Ti_(3)C_(2)T_(x)/CNF side of ITBCF reaches 166.7 S/cm,while the surface resistivity of the BNNS-OH/CNF side is as high as 304 MΩ.After Ca^(2+)ion infiltration,the mechanical properties of ITBCF are significantly enhanced.The tensile strength and modulus of ITBCF are 73.5 MPa and 15.6 GPa,which are increased by 75.9%and 46.2%compared with those of TBCF,respectively.Moreover,ITBCF exhibits outstanding EMI shielding effectiveness(SE)of 57 dB and thermal conductivity(λ)of 9.49 W/(m K).In addition,ITBCF also presents excellent photothermal and photoelectric energy conversion performance.Under simulated solar irradiation with a power density of 120 mW/cm^(2),the surface stabilization temperature reaches up to 65.3°C and the maximum steady state voltage reaches up to 58.2 mV.展开更多
基金Supported by the National Natural Science Foundation of China(22378181).
文摘The development of materials with excellent microwave absorption(MWA)and electromagnetic interference(EMI)shielding performances has currently received attention.Herein,mesophase pitch-based carbon foam(MPCF)with 3D interconnected pore structure was prepared through the high pressure pyrolysis of mesophase coal tar pitch.It is found that the 3D interconnected cellular pores of MPCF facilitate multiple reflections of electromagnetic waves,which results in the minimum reflection loss(RLmin)value of MPCF reaches-37.84 dB with the effective absorption bandwidth(EAB)of 5.44 GHz at a thickness of 2.70 mm,and the total average electromagnetic shielding effectiveness(SE_(T))under 3.00 mm thickness achieves 26.52 dB in X-band.Subsequently,MPCF is activated by KOH to obtain activated carbon foam(A-MPCF).The average SE_(T)of A-MPCF achieves 103.00 dB for abundant nanopores on the pore cell walls,which leads to a transition from the multiple reflections of electromagnetic waves on the walls to diffuse reflection.Unfortunately,the reflection coefficient(R)of A-MPCF increases from 0.78 to 0.90.To reduce the R value,Fe_(3)O_(4)/A-MPCF was fabricated via the in situ growth of nano Fe_(3)O_(4)on A-MPCF.Consequently,the R value of Fe_(3)O_(4)/A-MPCF was reduced from 0.90 to 0.74,whereas the MWA performance was only slightly decreased.This work proposes a simple strategy for simultaneously adjusting MWA and EMI shielding performances of materials.
基金supported by the Fundamental Research Funds for the Central Universities under No.2024KQ130the National Natural Science Foundation of China(No.52373259)。
文摘The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金support provided by the Center for Fabrication and Application of Electronic Materials at Dokuz Eylül University,Türkiye。
文摘Biochar and biochar composites are versatile materials that can be used in many applications.In this study,biochar was prepared from sawdust and combined with the yttrium iron garnet(YIG)nanocrystal to investigate the shielding effectiveness of the composite structure.Firstly,the effect of the pyrolysis temperature on the shielding effectiveness of biochar was investigated.Secondly,biochars combined with YIG nanocrystals with different contents and shielding effectiveness of the composites were investigated.The electromagnetic effectiveness of the samples was investigated within the X band(8-12 GHz).The findings indicate that biochar demonstrates enhanced absorption properties with elevated pyrolysis temperatures.Biochars demonstrated an approximate 40 d B shielding effectiveness,while YIG exhibited approximately 7 d B,corresponding to absorption at 8 GHz.However,the combination of biochar and YIG exhibited exceptional absorption,reaching 67.12 d B at 8 GHz.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2024QE446)。
文摘With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.
基金financially supported by the National Natural Science Foundation of China(52303036)the Natural Science Foundation of Guangxi(2024GXNSFBA010123)+2 种基金the International Science&Technology Innovation Cooperation Project of Sichuan Province(2024YFHZ0232)the International Science&Technology Cooperation Project of Chengdu(2021-GH03-00009-HZ)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Sklpme2023-3-18)。
文摘To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.
基金Financial support from the National Nature Science Foundation of China(No.:52373244)the Foundation of National Science and Technology Key Laboratory(No.:KZ571801)。
文摘Cross-band camouflage technology is a critical necessity,enabling personnel and equipment to evade detection across evolving surveillance systems,thereby enhancing survivability and mission success.Herein,this work develops a layer-structured composite system based on carbon nanotube(CNT)film comprising ionic liquid(IL)interlayer for infrared(IR)modulation and surface-engineered Cu_(2)O nanoparticles for visible camouflage.The CNT/IL/CNT architecture enables reversible IR emissivity switching(Δε≈0.55)through electrically driven ion intercalation/deintercalation within 2 s,while spray-coated Cu_(2)O nanoparticles(100~400 nm diameter)on the top CNT film layer generate rich structure colors with 90%IR transmittance.This spectral-decoupling design overcomes the traditional trade-off between color visibility and IR transmittance observed in pigment-based systems.Remarkably,due to physical interface coupling,the Cu_(2)O-coated layer-structured system maintains exceptional electrical conductivity,enabling simultaneous electromagnetic interference shielding and electrothermal energy conversion.The integrated system demonstrates long-term operational stability.By unifying visible-IR camouflage,electromagnetic protection,and energy management in a lightweight platform,this work provides an important paradigm for cross-band camouflage technologies.
基金supported by the Fundamental Research Funds for the Central Universities and Heilongjiang Provincial Natural Science Foundation of China(Grant No.YQ2020E009).
文摘Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.
基金National Natural Science Foundation of China(32201491)Young Elite Scientists Sponsorship Program by CAST(2023QNRC001)The authors extend their appreciation to the Deanship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-1101-02”.
文摘Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.
基金supported by the Natural Science Foundation of Anhui Province(No.2308085QE146 and 2208085ME116)the National Natural Science Foundation of China(No.52173039)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210894)the Anhui Provincial Universities Outstanding Youth Research Project(No.2023AH020018).
文摘Electromagnetic interference(EMI)shielding materials with superior shielding efficiency and low-reflection properties hold promising potential for utilization across electronic components,precision instruments,and fifth-generation communication equipment.In this study,multistage microcellular waterborne polyurethane(WPU)composites were constructed via gradient induction,layer-by-layer casting,and supercritical carbon dioxide foaming.The gradient-structured WPU/ironcobalt loaded reduced graphene oxide(FeCo@rGO)foam serves as an impedance-matched absorption layer,while the highly conductive WPU/silver loaded glass microspheres(Ag@GM)layer is employed as a reflection layer.Thanks to the incorporation of an asymmetric structure,as well as the introduction of gradient and porous configurations,the composite foam demonstrates excellent conductivity,outstanding EMI SE(74.9 dB),and minimal reflection characteristics(35.28%)in 8.2-12.4 GHz,implying that more than 99.99999%of electromagnetic(EM)waves were blocked and only 35.28%were reflected to the external environment.Interestingly,the reflectivity of the composite foam is reduced to 0.41%at 10.88 GHz due to the resonance for incident and reflected EM waves.Beyond that,the composite foam is characterized by low density(0.47 g/cm^(3))and great stability of EMI shielding properties.This work offers a viable approach for craft-ing lightweight,highly shielding,and minimally reflective EMI shielding composites.
文摘High-performance MXene-based polymer nanocomposites are well-suited for various industrial applications owing to their excellent mechanical,thermal,and other properties.However,the fabrication of flame-retardant polymer/MXene nanocom-posites remains challenging owing to the limited flame-retardant properties of MXene itself.This study prepared a novel MXene@Ag@PA hybrid material via radiation modification and complexation reaction.This material was used to further enhance the key properties of ethylene-vinyl acetate(EVA),such as its mechanical properties,thermal conductivity,flame retardancy,and electromagnetic shielding.The addition of two parts of this hybrid material increased the thermal conduc-tivity of EVA by 44.2%and reduced its peak exothermic rate during combustion by 30.1%compared with pure EVA.The material also significantly reduced smoke production and increased the residue content.In the X-band,the electromagnetic shielding effectiveness of the EVA composites reached 20 dB.Moreover,the MXene@Ag@PA hybrid material could be used to further enhance the mechanical properties of EVA composites under electron-beam irradiation.Thus,this study contributes to the development of MXene-based EVA advanced materials that are fire-safe,have high strength,and exhibit good electromagnetic shielding performance for various applications.
基金supported by the National Natural Sci-ence Foundation of China[No.51564032]Yunnan Provin-cial Department of Education Science Research Fund Project[KKPH202132005]the Analysis and Testing Founda-tion of Kunming University of Science and Technology[2022M20212130086].
文摘The performances of magnesium alloys remain insufficient to further enhance the application potential of ultralight magnesium alloys.In this work,a Mg-8Li-3Y-2Zn alloy was prepared through vacuum melting and subsequent heat treatment at 300,450,and 500°C.The material properties of the resulting samples were assessed through microstructural observation,tensile testing,electrical conductivity measurements,and electromagnetic shielding effectiveness(EMI-SE)testing.The influence of the Mg-8Li-3Y-2Zn alloy microstructure on its mechanical and electromagnetic shielding properties in different states was investigated.It was found that the as-cast alloy containsα-Mg,β-Li,Mg_(3)Zn_(3)Y_(2),and Mg_(12)ZnY phases.Following heat treatment at 500℃(HT500),the blockα-Mg phase transformedfine needle-shapes,its tensile strength increased to 263.7 MPa,and its elongation reached 45.3%.The mechanical properties of the alloy were significantly improved by the synergistic effects imparted by the needle-shapedα-Mg phase,solid solution strengthening,and precipitation strengthening.The addition of Y and Zn improved the EMI-SE of Mg-8Li-1Zn alloy,wherein the HT500 sample exhibits the highest SE,maintaining a value of 106.7–76.9 dB in the frequency range of 30–4500 MHz;this performance has rarely been reported for electromagnetically shielded alloys.This effect was mainly attributed to the multiple reflections of electromagnetic waves caused by the severe impedance mismatch of the abundant phase boundaries,which were in turn provided by the dual-phase(α/β)and secondary phases.Furthermore,the presence of nano-precipitation was also believed to enhance the absorption of electromagnetic waves.
基金support from the National Natural Science Foundation of China(52373077,52003106,52103074,52233006,52161135302)the Research Foundation Flanders(G0F2322N)Innovation Program of Shanghai Municipal Education Commission(2021-01-07-00-03-E00108).
文摘Designing and fabricating a compatible low-reflectivity electromagnetic interference(EMI)shielding/high-temperature resistant infrared stealth material possesses a critical significance in the field of military.Hence,a hierarchical polyimide(PI)nonwoven fabric is fabricated by alkali treatment,in-situ growth of magnetic particles and"self-activated"electroless Ag plating process.Especially,the hierarchical impedance matching can be constructed by systematically assembling Fe_(3)O_(4)/Ag-loaded PI nonwoven fabric(PFA)and pure Ag-coated PI nonwoven fabric(PA),endowing it with an ultralowreflectivity EMI shielding performance.In addition,thermal insulation of fluffy three-dimensional(3D)space structure in PFA and low infrared emissivity of PA originated from Ag plating bring an excellent infrared stealth performance.More importantly,the strong bonding interaction between Fe_(3)O_(4),Ag,and PI fiber improves thermal stability in EMI shielding and high-temperature resistant infrared stealth performance.Such excellent comprehensive performance makes it promising for military tents to protect internal equipment from electromagnetic interference stemmed from adjacent equipment and/or enemy,and inhibit external infrared detection.
基金supported by the National Natural Science Foundation of China(No.52163001)the Guizhou Provincial Science and Technology Program Project Grant,China(Qiankehe Platform Talents-CXTD[2021]005,Qiankehe Platform Talents-GCC[2022]010-1,Qiankehe Fuqi[2023]001,Qiankehe Platform Talents-GCC[2023]035,and Qiankehe Platform Talents-CXTD[2023]003)+3 种基金the Guizhou Minzu University Research Platform Grant,China(No.GZMUGCZX[2021]01)the Central Guided Local Science and Technology Development Funds Project,China(Qiankehe Zhong Yindi[2023]035)the Green Chemistry and Resource Environment Innovation Team of Guizhou Higher Education Institutions,China(Guizhou Education and Technology[2022]No.13)the Doctor Startup Fund of Guizhou Minzu University,China(No.GZMUZK[2024]QD77).
文摘With the wide application of electromagnetic wave,a high performance electromagnetic shielding material is urgently needed to solve the harm caused by electromagnetic wave.Complete cross-linking strategy is adopted in this paper.Polyacrylamide(PAM)was synthesized by in-situ polymerization of acrylamide(AM)monomer.The obtained PAM was blended with polyethylene glycol(PEG)to prepare PAM/PEG hydrogels and form rigid support structures.Subsequently,the modified carbon nanotubes(S-CNTs)were incorpor-ated into sodium alginate(SA)and PAM/PEG.Finally,Na+was used to trigger SA self-assembly,which significantly improved the mechanical properties and electrical conductivity of the hydrogels,and prepared PAM/PEG/SA/S-CNTs-Na hydrogels with high tough-ness and strong electromagnetic interference(EMI)shielding efficiency(SE).The results showed that the compressive strength of PAM/PEG/SA/S-CNTs-Na hydrogel was 19.05 MPa,which was 7.69%higher than that of PAM/PEG hydrogel(17.69 MPa).More en-couraging,the average EMI SE of PAM/PEG/SA/S-CNTs-Na hydrogels at a thickness of only 3 mm and a CNTs content of 16.53wt%was 32.92 dB,which is 113.21%higher than that of PAM/PEG hydrogels(15.44 dB).
基金supported by the National Natural Science Foundation of China(No.52271180)the Leading Goose R&D Program of Zhejiang Province(2022C01110).
文摘Metal foams are a fascinating group of materials that possess distinct physicochEMIcal properties and interconnected strut features with high surface area-to-volume ratios, high specific strength and lightweight nature. These characteristics make them ideal for applications in vibration damping, heat insulation and weight reduction. In recent years, there has been increasing interest in the application of interfering energy conversion such as electromagnetic wave (EMW) and sound, where the metal foams could emerge as a solution. This paper will present a comprehensive review of the preparation methods as well as the interference energy converting mechanisms for metal foams. Typically, the progress and prospective aspects of metal foams for EMW absorption, electromagnetic interference (EMI) shielding and sound absorption have been emphasized. Through this review, we aspire to offer valuable insights for the development of multifunctional applications with metal foam materials.
基金supported by the Key Research and Development Program of Sichuan Province(Grant No.2023ZHCG0050)the Fundamental Research Funds for the Central Universities of China(Grant No.2682024QZ006 and 2682024ZTPY042)the Analytic and Testing Center of Southwest Jiaotong University.
文摘As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.
基金financially supported by the National Natural Science Foundation of China(No.52173070)the Key research and development projects of Baoying County(No.BY202205).
文摘The construction of hierarchical thermoplastic polyurethane(TPU)composites with superior flame retardant and electromagnetic shielding capabilities hold significant practical importance.In this work,TPU composites loaded with a multilayer core-shell flame retardant(APP@CoAl-LDH@Si)and a modified conductive nanofiller(MWCNT-NH_(2)-PA)were firstly prepared through the melt blending method,acting as surface layer.Additionally,multilayered MXene films functionalized by bacterial cellulose(BC)and dopamine hydrochloride(DA)were fabricated via a facile and efficient vacuum filtration approach.Finally,a PBM film was utilized as an intermediate layer to construct hierarchical TPU composites.The results indicated that the introduction of 10 wt%APP@CoAl-LDH@Si hybrid,the peak heat release rate,total heat release,peak smoke production rate,and total smoke release of the TPU composites were decreased by 83.0%,61.3%,48.5%and 66.9%,respectively,compared with those of pure TPU due to the free radicals capture effect of APP,and the flame-retardant functions of LDH and silane.Moreover,the hierarchical TPU/APP@CoAl-LDH@Si/CP1-PBM exhibited excellent electromagnetic shielding performance,achieving 43.6 dB in the X-band because of multiple reflection losses,interface polarization losses,and charge carrier movement-induced thermal dissipation.Extraordinarily,the A and R coefficients were reversed in the X and K bands.This phenomenon was attributed to the different degrees of confinement of the multilayer structure to electromagnetic waves with different wavelengths.This work presents a novel model for the design and preparation of high-performance polymer composites with multiple properties and regulation mechanism.
基金financially supported by the National Key Research and Development Program of China(No.2021YBF3501304)the National Natural Science Foundation of China(Nos.52371171,52222106,51971008,52121001)+1 种基金the Natural Science Foundation of Beijing Municipality(No.2212033)We thank the researchers at the Analysis&Testing Center of Beihang University for their assistance with testing.
文摘Electromagnetic interference(EMI)shielding materials with adaptive strain capability have broad applications in wearable electronic devices.However,as an important candidate,compressible conductive foam generally suffers from a reduction in EMI shielding performance during compression,which limits its application.Here,a compressible conductive aerogel with a unique conductive compensation effect is designed to solve this problem.CuS microspheres with metal-like conductivity serve as conductive compensation sites,and are chemically embedded in the skeletons of lamellar-structured carboxymethylcellulose(CMC)/MXene aerogel through Cu–S−Ti−C chemical bonds.The incorporation of CuS induces circularly-distributed interfacial polarization to enhance the attenuation of EM waves.More importantly,these CuS microspheres act as interlayer bridges to connect the upper and lower MXene/CMC layers during compression,thereby establishing numerous conductive compensation paths to offset the negative effect of thickness reduction on shielding performance.The optimized CMC/MXene/CuS aerogel shows stable EMI shielding performance during compression,and maintains a high shielding effectiveness of∼32.31 dB with increasing compressive strain.In addition,this composite aerogel exhibits good thermal insulation and sound absorption performances,achieving triple shielding functions against EM waves,heat and sound.
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
基金financially supported by the National Natural Science Foundation of China(Nos.52303090,52403132,52403112,52473083)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2023-JC-QN-0168,2024JC-TBZC-04)+6 种基金the Innovation Capability Support Plan of Shaanxi Province(No.2024ZC-KJXX-022)the Shaanxi Province Key Research and Development Plan Project(No.2023-YBGY-461)the Innovation Capability Support Program of Shaanxi(No.2024RS-CXTD-57)the Natural Science Foundation of Chongqing,China(No.2023NSCQ-MSX2547)the Youth Talent Promotion Project of Shaanxi Science and Technology Association(No.20240426)The Special Scientific Research Plan of Education Department of Shaanxi Province(No.23JK0376)the authors would also like to thank Shiyaniia lab for the sup-port of SEM and XPS tests.
文摘Flexible multifunctional polymer-based electromagnetic interference(EMI)shielding composite films play a pivotal role in 5 G communication technology,smart wearables,automotive electronics,and aerospace.In this work,(Ti_(3)C_(2)T_(x) MXene/cellulose nanofibers(CNF)-(hydroxy‑functionalized BNNS(BNNS-OH)/CNF)composite films(TBCF)with Janus structure are prepared via vacuum-assisted filtration of BNNS-OH/CNF and Ti_(3)C_(2)T_(x)/CNF suspension by one after another.Then ionic bonding-strengthened TBCF(ITBCF)is obtained by Ca^(2+)ion infiltration and cold-pressing technique.The Janus structure endows ITBCF with the unique“conductive on one side and insulating on the other”property.When the mass ratio of Ti_(3)C_(2)T_(x) and BNNS is 1:1 and the total mass fraction is 70 wt.%,the electrical conductivity(σ)of the Ti_(3)C_(2)T_(x)/CNF side of ITBCF reaches 166.7 S/cm,while the surface resistivity of the BNNS-OH/CNF side is as high as 304 MΩ.After Ca^(2+)ion infiltration,the mechanical properties of ITBCF are significantly enhanced.The tensile strength and modulus of ITBCF are 73.5 MPa and 15.6 GPa,which are increased by 75.9%and 46.2%compared with those of TBCF,respectively.Moreover,ITBCF exhibits outstanding EMI shielding effectiveness(SE)of 57 dB and thermal conductivity(λ)of 9.49 W/(m K).In addition,ITBCF also presents excellent photothermal and photoelectric energy conversion performance.Under simulated solar irradiation with a power density of 120 mW/cm^(2),the surface stabilization temperature reaches up to 65.3°C and the maximum steady state voltage reaches up to 58.2 mV.
