The relationship between sequence distributions and molecular weight distributions of S-SBR, obtained from styrene and butadiene anionic copolymerization at various conversions with THF/Li^+ as an initiator has been s...The relationship between sequence distributions and molecular weight distributions of S-SBR, obtained from styrene and butadiene anionic copolymerization at various conversions with THF/Li^+ as an initiator has been studied by ^(13)C-NMR,GPC. The results showed that the molecular weight distributions of the copolymer couldbe correlated sophisticatedly to the binary sequcne distributions or the monomer unit distributions of the copolymer in a corrected Poisson's distribution from.展开更多
Metallocene based polyethylenes were prepared by SMOPEC's 'metallocene adduct' technology in a gas phase fluidized bed model reactor. The C-13-NMR spectra of ethylene/1-butene (S-34) and ethylene/1-hexene(...Metallocene based polyethylenes were prepared by SMOPEC's 'metallocene adduct' technology in a gas phase fluidized bed model reactor. The C-13-NMR spectra of ethylene/1-butene (S-34) and ethylene/1-hexene(S-43) copolymers were studied in a manner analogous to that established by Hsieh and Cheng. The comonomer sequence distributions of copolymer samples were obtained. The results show that these metallocene based copolymers contain a small amount of butene and hexene, and the EE and EEE sequences are dominant.展开更多
The random, block, and alternative copolymers of poly ether sulfone（PES） and poly ether ether sulfone（PEES） were synthesized v/a three kinds of methods. The chemical structures of the three kinds of copolymers wer...The random, block, and alternative copolymers of poly ether sulfone（PES） and poly ether ether sulfone（PEES） were synthesized v/a three kinds of methods. The chemical structures of the three kinds of copolymers were characterized by ^13C NMR. Three kinds of PES/PEES copolymers（ Tg =215 ℃ ）, which were almost identical in composition but different in sequence distribution, were used. Their physical aging process was studied by differential scanning calorimetry（DSC） at three aging temperatures ranging between Tg -15 ℃ and Tg -25℃. The experimental results reveal that the alternative copolymer shows a lower enthalpy relaxation time 〈T〉 and apparent activation energy when compared with the random and block copolymers. The result of the electron-microscopy investigation of the three copolymers that were treated at 200 ℃ for 96 h indicates that the molecular aggregation of the copolymers changed from a randomly coiled amorphous phase to an ordered phase, and the ordered structure of the alternative copolymer was more distinct than that of the random phase. The experimental results of this study suggest that the motion of the sagments is affected by the different molecular-chain sequence distribution.展开更多
Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it t...Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in Chuan-Dian rhombic block and concerned Xianshuihe-Anninghe-Xiaojiang seismic belt, as well as in Jinshajiang-Honghe seismic belt. Multiple mainshock type （MMT） mainly distributes in western Yunnan, and Longlin and Lancang areas in Tengchong-Baoshan block in west of Nujiang-Lancangjiang fault zone. A few isolated earthquake type （IET） mainly occurred in northwestern Sichuan and there is no IET occurred in Yunnan region. In northwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in west segment of South Tianshan in Xinjiang region. Some MMT also occurred in this area in the intersection of Kalpin block and the Puchang fault zone. It takes IET as the major in middle Tianshan in Xinjiang. Along the Qilianshan seismic belt, most of sequences are MAT. In Qinghai region, it takes MAT as the major, but the regional feature of the spatial distribution of sequence types is not very clear. In North China, it takes MAT as the major in Yinshan-Yanshan-Bohai seismic belt, north edge of North China, and in Hebei plain seismic belt, as well as in sub-plate of lower river area of Yangtze River. In intersection of north segment of Shanxi seismic belt and the NW-trending Yinshan-Yanshan-Bohai seismic belt, there are several moderate or strong MMT with magnitude from 5.0 to 6.0 occurred. In south of North China around the latitude line of 35°N, it takes IET as the major. The spatial distribution of sequence types is relevant to the patterns of tectonic movements. MAT is mostly produced by the ruptures of locked units or asperities or the neonatal separating segments inside the fault zones. MMT is generally relevant to the conjugate structures or intersection of many tectonic settings. Further extension of simple fault often produces IET. Spatial distribution of sequence types is also correlative to the regional and deep environment of crustal medium to some extent. MAT mainly distributes in high velocity area in upper crust or in the transition zone between high velocity area and low velocity area, MMT mostly occurred in the low velocity area in upper crust.展开更多
Four new paranmeters, and , and have been proposed to describe the average length of the sequence of substituted anhydroglucose units and that of unsubstituted ones respectively along the CMC chain. The methods for de...Four new paranmeters, and , and have been proposed to describe the average length of the sequence of substituted anhydroglucose units and that of unsubstituted ones respectively along the CMC chain. The methods for determining those parameters have also been presented . Six CMC samples have been characterized in terms of intrinsic viscosity, degree of substitution （DS）, index of substitution（SI）;and . It has been proved experimentally that, not only can describe the sequence distribution along the CMC chain, but also can be used for calculating SI and estimating the average degree of substitution in the substituted glucose rings.展开更多
A program of Monte Carlo simulation of binary copolymerization for E-SBR (emulsion polymn. SB rubber) was made according to the terminal model. The simulation results obtained by this program were in good agreement wi...A program of Monte Carlo simulation of binary copolymerization for E-SBR (emulsion polymn. SB rubber) was made according to the terminal model. The simulation results obtained by this program were in good agreement with those experimental ones. A detail microstructure information of E-SBR molecular chain has been provided.展开更多
The sequence structures of emulsion-processed SBR and solution-processed (by lithium catalyst) SBR were investigated by ^(13)C-NMR spectroscopy. Seventeen peaks within unsaturated carbon region were recorded under the...The sequence structures of emulsion-processed SBR and solution-processed (by lithium catalyst) SBR were investigated by ^(13)C-NMR spectroscopy. Seventeen peaks within unsaturated carbon region were recorded under the adopted experimental conditions. Assignments for these peaks were made by empirical-parameter-evaluation method.展开更多
The study on ^(13)C-NMR spectra of aliphatic carbon region of emuision-processed and solution-processed (by lithium catalyst) SBR was carried out. The assignments for more than thirty odd peaks observed experimentally...The study on ^(13)C-NMR spectra of aliphatic carbon region of emuision-processed and solution-processed (by lithium catalyst) SBR was carried out. The assignments for more than thirty odd peaks observed experimentally were made by using 'corresponding analysis' method, combined with the empirical parameters reported in literature. The peak intensifies were calculated based on BemouUian statistic assumption.展开更多
The rapid growth of blockchain and Decentralized Finance(DeFi)has introduced new challenges and vulnerabilities that threaten the integrity and efficiency of the ecosystem.This study identifies critical issues such as...The rapid growth of blockchain and Decentralized Finance(DeFi)has introduced new challenges and vulnerabilities that threaten the integrity and efficiency of the ecosystem.This study identifies critical issues such as Transaction Order Dependence(TOD),Blockchain Extractable Value(BEV),and Transaction Importance Diversity(TID),which collectively undermine the fairness and security of DeFi systems.BEV-related activities,including sandwich attacks,liquidations,transaction replay etc.have emerged as significant threats,collectively generating$540.54 million in losses over 32 months across 11,289 addresses,involving 49,691 cryptocurrencies and 60,830 on-chain markets.These attacks exploit transaction mechanics to manipulate asset prices and extract value at the expense of other participants,with sandwich attacks being particularly impactful.Additionally,the growing adoption of blockchain in traditional finance highlights the challenge of TID,wherein high transaction volumes can strain systems and compromise time-sensitive operations.To address these pressing issues,we propose a novel Distributed Transaction Sequencing Strategy(DTSS)that integrates forking mechanisms with an Analytic Hierarchy Process(AHP)to enforce fair and transparent transaction ordering in a decentralized manner.Our approach is further enhanced by an optimization framework and the introduction of a Normalized Allocation Disparity Metric(NADM)that ensures optimal parameter selection for transaction prioritization.Experimental evaluations demonstrated that the DTSS effectively mitigated BEV risks,enhanced transaction fairness,and significantly improved the security and transparency of DeFi ecosystems.展开更多
Traditional petroleum system theories emphasize the restoration of the accumulation process from“source”to“trap”.The main oil and gas resources in the concept are conventional oil and gas,lacking the concept and r...Traditional petroleum system theories emphasize the restoration of the accumulation process from“source”to“trap”.The main oil and gas resources in the concept are conventional oil and gas,lacking the concept and research of unconventional oil and gas enrichment mechanism.The whole petroleum system is developed from the traditional petroleum system.Combined with unconventional oil and gas exploration practices and discoveries such as shale oil and gas,the whole petroleum system adds the research content of unconventional oil and gas.Although the study of the whole petroleum system is still in three aspects:geological elements,dynamic evolution and oil and gas distribution,its research ideas and research contents are very different,including the following three aspects.(1)In terms of geological elements,the traditional petroleum system studies the characteristics of source rocks and hydrocarbon generation evolution,and the reservoir properties,traps,migration and preservation conditions of conventional oil and gas.On the basis of the above research,the whole petroleum system has increased the quantitative evaluation of retained hydrocarbons,unconventional reservoir characterization,source reservoir configuration and other research contents.(2)In terms of dynamic evolution,the petroleum system studies the matching between the evolution of conventional oil and gas source rocks and the formation period of traps,while the whole petroleum system has increased the research content of the matching of unconventional reservoir densification and oil and gas charging,and the later transformation of unconventional oil and gas reservoirs.(3)In terms of oil and gas distribution,the petroleum system takes buoyancy-drived accumulation mechanism as the core to study the migration,accumulation and distribution of conventional oil and gas.The whole petroleum system adds unconventional oil and gas self-sealing accumulation mechanism and conventional-unconventional oil and gas distribution sequence,so as to determine the oil and gas distribution characteristics of the whole petroleum system.展开更多
The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant difference...The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant differences were found in the physical and mechanical propertiesof the latexes and films, depending on the methods of monomer feeding. The results both intheory and experiments demonstrated that the copolymer composition and the length of the VDC sequences in the copolymer could be controlled by the modes of monomer feeding process.展开更多
In this paper the change of segment ratio, segmental sequence distribution and randonmess B of PET-PTMG block copolymer have been investigated by IR and ^(13)C-NMR spectra during the polycondensation reaction.
Through kinetic method, the reaction mechanism and the rate equations of chlorination of polyethylene are suggested in this paper. The rate of chlorination is second order with respect to the concentration of methylen...Through kinetic method, the reaction mechanism and the rate equations of chlorination of polyethylene are suggested in this paper. The rate of chlorination is second order with respect to the concentration of methylene remained and chlorine, respectively. Apparent changes in crystallinity during chlorination processes were determinated by differential scanning calorimetry(DSC). The mathematical model relating crystallinety with kinetic parameters and function of sequence length distribution are derived.展开更多
The reactivity ratio of monomer and the microstructure of copolymer as polycarboxylate ether(PCE)superplasticizer were investigated.Polycarboxylate ethers(PCEs)were synthesized from methyl allyl polyethylene glycol(MA...The reactivity ratio of monomer and the microstructure of copolymer as polycarboxylate ether(PCE)superplasticizer were investigated.Polycarboxylate ethers(PCEs)were synthesized from methyl allyl polyethylene glycol(MAPEG,Mw=2400 g/mol)and methacrylic acid(MAA)via aqueous free radical copolymerization in low conversion(P<20%).Gel permeation chromatography(GPC)and high performance liquid chromatography(HPLC)were used to track the residual concentration of the reactants and the amount of copolymer formed during the copolymerization.The reactivity ratios of monomers,MAPEG and MAA,were determined as r1(MAPEG)=0.0489 and r2(MAA)=1.6173,respectively,by employing the K-T and YBR methods.According to the obtained monomer reactivity results,the sequence distribution of the copolymer,the number average length of MAA in the polymerisate were found to decline with the decrease of the mole fraction of MAA in the polymerization system.As a result,the distribution of chain segments becomes narrower and the copolymer structure becomes more uniform.Therefore,uniform polymers could be obtained by slowly adding MAA monomer during copolymerization process.展开更多
The structural analysis of two PP/PE copolymer samples,1 and 2,was conducted by using^(13)C-NMR,GPC and crystallization segregation DSC(CSDSC)techniques.A pure polypropylene sample was also used for comparison.It was ...The structural analysis of two PP/PE copolymer samples,1 and 2,was conducted by using^(13)C-NMR,GPC and crystallization segregation DSC(CSDSC)techniques.A pure polypropylene sample was also used for comparison.It was found that the two copolymer samples are very close in composition(the ethylene mol content is 4.3%and 4.5%,respectively),stereoregularity(96%and 97%)and molecular weight(M_(w)=7.0 x 10^(4)and 7.3 x 10^(4);M-(w)/M_(n)=5.0 and 6.1,respectively).While the CSDSC thermograms of the two samples are quite different from each other.Sample 1 shows a higher average melting temperature and a broader distribution of its thermogram These phenomena were explained as an indication of a less uniform distribution of ethylene units along the PP chains for sample 1.It was noted that CSDSC is a very sensitive and convenient technique for structural studies of copolymers.展开更多
A ^(13)C-NMR method is presented for a quantitative determination of the respective monomercomposition and sequence distributions in ethylene-1-octene copolymers prepared with supportedtitanium/magnesium catalyst. On ...A ^(13)C-NMR method is presented for a quantitative determination of the respective monomercomposition and sequence distributions in ethylene-1-octene copolymers prepared with supportedtitanium/magnesium catalyst. On the basis of the sequence distributions, the ethylene-1-octenecopolymerization mechanism was studied. It was found that the observed sequence distributions inethylene-1-octene copolymers are satisfactorily predicted by the two-site model M/M,in whichthe copolymerization proceeds according to first-order Markovian statistics at the two differentsites.展开更多
Disinfectants are commonly applied to control the growth of microorganisms in drinking water distribution systems. However, the effect of disinfection on drinking water microbial community remains poorly understood. T...Disinfectants are commonly applied to control the growth of microorganisms in drinking water distribution systems. However, the effect of disinfection on drinking water microbial community remains poorly understood. The present study investigated the impacts of different disinfectants（chlorine and chloramine） and dosages on biofilm bacterial community in bench-scale pipe section reactors. Illumina MiS eq sequencing illustrated that disinfection strategy could affect both bacterial diversity and community structure of drinking water biofilm. Proteobacteria tended to predominate in chloraminated drinking water biofilms, while Firmicutes in chlorinated and unchlorinated biofilms. The major proteobacterial groups were influenced by both disinfectant type and dosage. In addition, chloramination had a more profound impact on bacterial community than chlorination.展开更多
Delivery of safe and pathogen-free drinking water is crucial to public health.However,there exist challenges to the maintenance of the sterility of drinking water throughout the drinking water distribution systems（D...Delivery of safe and pathogen-free drinking water is crucial to public health.However,there exist challenges to the maintenance of the sterility of drinking water throughout the drinking water distribution systems（DWDS）.Microbial growth in DWDS,such as growth of opportunistic pathogenic microorganisms,can lead to severe health problems in consumers（Berry et al.,2006;Brettar and Hofle,2006;Lu et al.,2014;Zhang et al.,2015）.展开更多
Bacterial community in the drinking water distribution system （DWDS） was regulated by multiple environmental factors, many of which varied as a function of water age. In this study, four water samples with different...Bacterial community in the drinking water distribution system （DWDS） was regulated by multiple environmental factors, many of which varied as a function of water age. In this study, four water samples with different water ages, including finished water （FW, 0 d） and tap water （TW） [TWI （1 d）, TW2（2 d） and TW3（3 d）], were collected along with the mains of a practical DWDS, and the bacterial community was investigated by high-throughput sequencing technique. Results indicated that the residual chlorine declined with the increase of water age, accompanied by the increase of dissolved organic matter, total bacteria counts and bacterial diversity （Shannon）. For bacterial community composition, although Proteobacteria phylum （84.12%-97.6%） and Alphaproteobacteria class （67.42c/,~93.09%） kept dominate, an evident regular was observed at the order level. In detail, the relative abundance of most of other residual orders increased with different degrees from the start to the end of the DWDS, while a downward trend was uniquely observed in terms of Rhizobiales, who was inferred to be chlorine-resistant and be helpful for inhibiting pipes corrosion. Moreover, some OTUs were found to be closely related with species possessing pathogenicity and chlorine-resistant ability, so it was recommended that the use of agents other than chlorine or agents that can act synergically with chlorine should be developed for drinking water disinfection. This paper revealed bacterial community variations along the mains of the DWDS and the result was helpful for understanding bacterial ecology in the DWDS.展开更多
We designed and implemented a signal generator that can simulate the output of the NaI（Tl）/CsI（Na）detectors＇pre-amplifier onboard the Hard X-ray Modulation Telescope（HXMT）.Using the development of the FPGA（Fie...We designed and implemented a signal generator that can simulate the output of the NaI（Tl）/CsI（Na）detectors＇pre-amplifier onboard the Hard X-ray Modulation Telescope（HXMT）.Using the development of the FPGA（Field Programmable Gate Array）with VHDL language and adding a random constituent,we have finally produced the double exponential random pulse signal generator.The statistical distribution of the signal amplitude is programmable.The occurrence time intervals of the adjacent signals contain negative exponential distribution statistically.展开更多
文摘The relationship between sequence distributions and molecular weight distributions of S-SBR, obtained from styrene and butadiene anionic copolymerization at various conversions with THF/Li^+ as an initiator has been studied by ^(13)C-NMR,GPC. The results showed that the molecular weight distributions of the copolymer couldbe correlated sophisticatedly to the binary sequcne distributions or the monomer unit distributions of the copolymer in a corrected Poisson's distribution from.
文摘Metallocene based polyethylenes were prepared by SMOPEC's 'metallocene adduct' technology in a gas phase fluidized bed model reactor. The C-13-NMR spectra of ethylene/1-butene (S-34) and ethylene/1-hexene(S-43) copolymers were studied in a manner analogous to that established by Hsieh and Cheng. The comonomer sequence distributions of copolymer samples were obtained. The results show that these metallocene based copolymers contain a small amount of butene and hexene, and the EE and EEE sequences are dominant.
文摘The random, block, and alternative copolymers of poly ether sulfone（PES） and poly ether ether sulfone（PEES） were synthesized v/a three kinds of methods. The chemical structures of the three kinds of copolymers were characterized by ^13C NMR. Three kinds of PES/PEES copolymers（ Tg =215 ℃ ）, which were almost identical in composition but different in sequence distribution, were used. Their physical aging process was studied by differential scanning calorimetry（DSC） at three aging temperatures ranging between Tg -15 ℃ and Tg -25℃. The experimental results reveal that the alternative copolymer shows a lower enthalpy relaxation time 〈T〉 and apparent activation energy when compared with the random and block copolymers. The result of the electron-microscopy investigation of the three copolymers that were treated at 200 ℃ for 96 h indicates that the molecular aggregation of the copolymers changed from a randomly coiled amorphous phase to an ordered phase, and the ordered structure of the alternative copolymer was more distinct than that of the random phase. The experimental results of this study suggest that the motion of the sagments is affected by the different molecular-chain sequence distribution.
基金Joint Seismological Science Foundation of China (105076) and continued subject ″Statistic Features of Aftershock Sequences and Forecast of the Large Aftershocks″ (2004BA601B01-04-02), Ministry of Science and Technology of China in the 10th Five-Year Plan.
文摘Based on 294 earthquake sequences with magnitude greater than or equal to 5.0 occurred in Chinese mainland since 1970, the spatial distribution features of sequence types have been studied. In southwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in Chuan-Dian rhombic block and concerned Xianshuihe-Anninghe-Xiaojiang seismic belt, as well as in Jinshajiang-Honghe seismic belt. Multiple mainshock type （MMT） mainly distributes in western Yunnan, and Longlin and Lancang areas in Tengchong-Baoshan block in west of Nujiang-Lancangjiang fault zone. A few isolated earthquake type （IET） mainly occurred in northwestern Sichuan and there is no IET occurred in Yunnan region. In northwestern China, it takes mainshock-aftershock sequence type （MAT） as the major in west segment of South Tianshan in Xinjiang region. Some MMT also occurred in this area in the intersection of Kalpin block and the Puchang fault zone. It takes IET as the major in middle Tianshan in Xinjiang. Along the Qilianshan seismic belt, most of sequences are MAT. In Qinghai region, it takes MAT as the major, but the regional feature of the spatial distribution of sequence types is not very clear. In North China, it takes MAT as the major in Yinshan-Yanshan-Bohai seismic belt, north edge of North China, and in Hebei plain seismic belt, as well as in sub-plate of lower river area of Yangtze River. In intersection of north segment of Shanxi seismic belt and the NW-trending Yinshan-Yanshan-Bohai seismic belt, there are several moderate or strong MMT with magnitude from 5.0 to 6.0 occurred. In south of North China around the latitude line of 35°N, it takes IET as the major. The spatial distribution of sequence types is relevant to the patterns of tectonic movements. MAT is mostly produced by the ruptures of locked units or asperities or the neonatal separating segments inside the fault zones. MMT is generally relevant to the conjugate structures or intersection of many tectonic settings. Further extension of simple fault often produces IET. Spatial distribution of sequence types is also correlative to the regional and deep environment of crustal medium to some extent. MAT mainly distributes in high velocity area in upper crust or in the transition zone between high velocity area and low velocity area, MMT mostly occurred in the low velocity area in upper crust.
文摘Four new paranmeters, and , and have been proposed to describe the average length of the sequence of substituted anhydroglucose units and that of unsubstituted ones respectively along the CMC chain. The methods for determining those parameters have also been presented . Six CMC samples have been characterized in terms of intrinsic viscosity, degree of substitution （DS）, index of substitution（SI）;and . It has been proved experimentally that, not only can describe the sequence distribution along the CMC chain, but also can be used for calculating SI and estimating the average degree of substitution in the substituted glucose rings.
文摘A program of Monte Carlo simulation of binary copolymerization for E-SBR (emulsion polymn. SB rubber) was made according to the terminal model. The simulation results obtained by this program were in good agreement with those experimental ones. A detail microstructure information of E-SBR molecular chain has been provided.
文摘The sequence structures of emulsion-processed SBR and solution-processed (by lithium catalyst) SBR were investigated by ^(13)C-NMR spectroscopy. Seventeen peaks within unsaturated carbon region were recorded under the adopted experimental conditions. Assignments for these peaks were made by empirical-parameter-evaluation method.
文摘The study on ^(13)C-NMR spectra of aliphatic carbon region of emuision-processed and solution-processed (by lithium catalyst) SBR was carried out. The assignments for more than thirty odd peaks observed experimentally were made by using 'corresponding analysis' method, combined with the empirical parameters reported in literature. The peak intensifies were calculated based on BemouUian statistic assumption.
基金funded by the University of Macao(file no.MYRG2022-00162-FST and MYRG2019-00136-FST).
文摘The rapid growth of blockchain and Decentralized Finance(DeFi)has introduced new challenges and vulnerabilities that threaten the integrity and efficiency of the ecosystem.This study identifies critical issues such as Transaction Order Dependence(TOD),Blockchain Extractable Value(BEV),and Transaction Importance Diversity(TID),which collectively undermine the fairness and security of DeFi systems.BEV-related activities,including sandwich attacks,liquidations,transaction replay etc.have emerged as significant threats,collectively generating$540.54 million in losses over 32 months across 11,289 addresses,involving 49,691 cryptocurrencies and 60,830 on-chain markets.These attacks exploit transaction mechanics to manipulate asset prices and extract value at the expense of other participants,with sandwich attacks being particularly impactful.Additionally,the growing adoption of blockchain in traditional finance highlights the challenge of TID,wherein high transaction volumes can strain systems and compromise time-sensitive operations.To address these pressing issues,we propose a novel Distributed Transaction Sequencing Strategy(DTSS)that integrates forking mechanisms with an Analytic Hierarchy Process(AHP)to enforce fair and transparent transaction ordering in a decentralized manner.Our approach is further enhanced by an optimization framework and the introduction of a Normalized Allocation Disparity Metric(NADM)that ensures optimal parameter selection for transaction prioritization.Experimental evaluations demonstrated that the DTSS effectively mitigated BEV risks,enhanced transaction fairness,and significantly improved the security and transparency of DeFi ecosystems.
基金Supported by the Fundamental Project of China National Petroleum Corporation(2021DJ0101)。
文摘Traditional petroleum system theories emphasize the restoration of the accumulation process from“source”to“trap”.The main oil and gas resources in the concept are conventional oil and gas,lacking the concept and research of unconventional oil and gas enrichment mechanism.The whole petroleum system is developed from the traditional petroleum system.Combined with unconventional oil and gas exploration practices and discoveries such as shale oil and gas,the whole petroleum system adds the research content of unconventional oil and gas.Although the study of the whole petroleum system is still in three aspects:geological elements,dynamic evolution and oil and gas distribution,its research ideas and research contents are very different,including the following three aspects.(1)In terms of geological elements,the traditional petroleum system studies the characteristics of source rocks and hydrocarbon generation evolution,and the reservoir properties,traps,migration and preservation conditions of conventional oil and gas.On the basis of the above research,the whole petroleum system has increased the quantitative evaluation of retained hydrocarbons,unconventional reservoir characterization,source reservoir configuration and other research contents.(2)In terms of dynamic evolution,the petroleum system studies the matching between the evolution of conventional oil and gas source rocks and the formation period of traps,while the whole petroleum system has increased the research content of the matching of unconventional reservoir densification and oil and gas charging,and the later transformation of unconventional oil and gas reservoirs.(3)In terms of oil and gas distribution,the petroleum system takes buoyancy-drived accumulation mechanism as the core to study the migration,accumulation and distribution of conventional oil and gas.The whole petroleum system adds unconventional oil and gas self-sealing accumulation mechanism and conventional-unconventional oil and gas distribution sequence,so as to determine the oil and gas distribution characteristics of the whole petroleum system.
基金The project is supported by Beijing Natural Science Fund.
文摘The emulsion copolymerization of vinylidene chloride (VDC) with methyl-methacrylate(MMA) and acrylonitrile (AN) was carried out by batch, seeded batch and semicontinuous pro-cesses,respectively. Significant differences were found in the physical and mechanical propertiesof the latexes and films, depending on the methods of monomer feeding. The results both intheory and experiments demonstrated that the copolymer composition and the length of the VDC sequences in the copolymer could be controlled by the modes of monomer feeding process.
文摘In this paper the change of segment ratio, segmental sequence distribution and randonmess B of PET-PTMG block copolymer have been investigated by IR and ^(13)C-NMR spectra during the polycondensation reaction.
文摘Through kinetic method, the reaction mechanism and the rate equations of chlorination of polyethylene are suggested in this paper. The rate of chlorination is second order with respect to the concentration of methylene remained and chlorine, respectively. Apparent changes in crystallinity during chlorination processes were determinated by differential scanning calorimetry(DSC). The mathematical model relating crystallinety with kinetic parameters and function of sequence length distribution are derived.
基金Funded by the Key Materials and Preparation Technology of Long-life Concrete Products Project(No.2017YFB0310002)through the National Key R&D Program。
文摘The reactivity ratio of monomer and the microstructure of copolymer as polycarboxylate ether(PCE)superplasticizer were investigated.Polycarboxylate ethers(PCEs)were synthesized from methyl allyl polyethylene glycol(MAPEG,Mw=2400 g/mol)and methacrylic acid(MAA)via aqueous free radical copolymerization in low conversion(P<20%).Gel permeation chromatography(GPC)and high performance liquid chromatography(HPLC)were used to track the residual concentration of the reactants and the amount of copolymer formed during the copolymerization.The reactivity ratios of monomers,MAPEG and MAA,were determined as r1(MAPEG)=0.0489 and r2(MAA)=1.6173,respectively,by employing the K-T and YBR methods.According to the obtained monomer reactivity results,the sequence distribution of the copolymer,the number average length of MAA in the polymerisate were found to decline with the decrease of the mole fraction of MAA in the polymerization system.As a result,the distribution of chain segments becomes narrower and the copolymer structure becomes more uniform.Therefore,uniform polymers could be obtained by slowly adding MAA monomer during copolymerization process.
文摘The structural analysis of two PP/PE copolymer samples,1 and 2,was conducted by using^(13)C-NMR,GPC and crystallization segregation DSC(CSDSC)techniques.A pure polypropylene sample was also used for comparison.It was found that the two copolymer samples are very close in composition(the ethylene mol content is 4.3%and 4.5%,respectively),stereoregularity(96%and 97%)and molecular weight(M_(w)=7.0 x 10^(4)and 7.3 x 10^(4);M-(w)/M_(n)=5.0 and 6.1,respectively).While the CSDSC thermograms of the two samples are quite different from each other.Sample 1 shows a higher average melting temperature and a broader distribution of its thermogram These phenomena were explained as an indication of a less uniform distribution of ethylene units along the PP chains for sample 1.It was noted that CSDSC is a very sensitive and convenient technique for structural studies of copolymers.
基金This work was supported by the National Natural Science Foundation of China
文摘A ^(13)C-NMR method is presented for a quantitative determination of the respective monomercomposition and sequence distributions in ethylene-1-octene copolymers prepared with supportedtitanium/magnesium catalyst. On the basis of the sequence distributions, the ethylene-1-octenecopolymerization mechanism was studied. It was found that the observed sequence distributions inethylene-1-octene copolymers are satisfactorily predicted by the two-site model M/M,in whichthe copolymerization proceeds according to first-order Markovian statistics at the two differentsites.
基金financially supported by the State Environmental Protection Key Laboratory of Microorganism Application and Risk Control (No. MARC2012D010)the National Water Special Program (No. 2012ZX07404-002)the International Science & Technology Cooperation Program of China (No. 2010DFA91830)
文摘Disinfectants are commonly applied to control the growth of microorganisms in drinking water distribution systems. However, the effect of disinfection on drinking water microbial community remains poorly understood. The present study investigated the impacts of different disinfectants（chlorine and chloramine） and dosages on biofilm bacterial community in bench-scale pipe section reactors. Illumina MiS eq sequencing illustrated that disinfection strategy could affect both bacterial diversity and community structure of drinking water biofilm. Proteobacteria tended to predominate in chloraminated drinking water biofilms, while Firmicutes in chlorinated and unchlorinated biofilms. The major proteobacterial groups were influenced by both disinfectant type and dosage. In addition, chloramination had a more profound impact on bacterial community than chlorination.
文摘Delivery of safe and pathogen-free drinking water is crucial to public health.However,there exist challenges to the maintenance of the sterility of drinking water throughout the drinking water distribution systems（DWDS）.Microbial growth in DWDS,such as growth of opportunistic pathogenic microorganisms,can lead to severe health problems in consumers（Berry et al.,2006;Brettar and Hofle,2006;Lu et al.,2014;Zhang et al.,2015）.
文摘Bacterial community in the drinking water distribution system （DWDS） was regulated by multiple environmental factors, many of which varied as a function of water age. In this study, four water samples with different water ages, including finished water （FW, 0 d） and tap water （TW） [TWI （1 d）, TW2（2 d） and TW3（3 d）], were collected along with the mains of a practical DWDS, and the bacterial community was investigated by high-throughput sequencing technique. Results indicated that the residual chlorine declined with the increase of water age, accompanied by the increase of dissolved organic matter, total bacteria counts and bacterial diversity （Shannon）. For bacterial community composition, although Proteobacteria phylum （84.12%-97.6%） and Alphaproteobacteria class （67.42c/,~93.09%） kept dominate, an evident regular was observed at the order level. In detail, the relative abundance of most of other residual orders increased with different degrees from the start to the end of the DWDS, while a downward trend was uniquely observed in terms of Rhizobiales, who was inferred to be chlorine-resistant and be helpful for inhibiting pipes corrosion. Moreover, some OTUs were found to be closely related with species possessing pathogenicity and chlorine-resistant ability, so it was recommended that the use of agents other than chlorine or agents that can act synergically with chlorine should be developed for drinking water disinfection. This paper revealed bacterial community variations along the mains of the DWDS and the result was helpful for understanding bacterial ecology in the DWDS.
基金Supported by the 973 Program(2009CB824800),NSFC(10978001,11003011)the Knowledge Innovation Program of Chinese Academy of Sciences(200931111192010)
文摘We designed and implemented a signal generator that can simulate the output of the NaI（Tl）/CsI（Na）detectors＇pre-amplifier onboard the Hard X-ray Modulation Telescope（HXMT）.Using the development of the FPGA（Field Programmable Gate Array）with VHDL language and adding a random constituent,we have finally produced the double exponential random pulse signal generator.The statistical distribution of the signal amplitude is programmable.The occurrence time intervals of the adjacent signals contain negative exponential distribution statistically.
