In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
As an important strategic rare-earth resource,bastnaesite has long been a global research focus.The carbochlorination process,as an efficient and low-cost extraction method,can be applied to treat bastnaesite,achievin...As an important strategic rare-earth resource,bastnaesite has long been a global research focus.The carbochlorination process,as an efficient and low-cost extraction method,can be applied to treat bastnaesite,achieving ideal rare-earth extraction results in just one-step reaction.By using inexpensive chlorine gas as the chlorinating agent,it avoids lengthy procedural steps and the generation of acid-base waste liquids.Based on this,we propose a novel carbochlorination process for bastnaesite involving a fluorine-fixing agent.Thermodynamic data for the carbochlorination process of bastnaesite were calculated using the group contribution method.Thermodynamic feasibility was verified through Gibbs free energy.The effects of different chlorination times,fluorine-fixing agent dosages,chlorine flow rates,and chlorination temperatures on the carbochlorination process of bastnaesite were investigated.Experimental studies showed that under optimal chlorination conditions,a temperature of 800℃,a duration of 60 min,a fluorine-fixing agent dosage of 10%,and a chlorine flow rate of 10 L·min^(−1),the chlorination rates of rare-earth elements,Ca,Ba,and Fe in bastnaesite reached 96%,99%,98%,and 99%,respectively.The reaction mechanism was explored and analyzed based on characterization results such as mineral phase composition,micromorphology and thermogravimetry of water-washed residues under different chlorination conditions.Additionally,kinetic experiments were conducted at varying reaction temperatures and chlorine flow rates,revealing that the carbon-chlorination process is primarily controlled by chemical reactions.展开更多
With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving...With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving mechanism was still unclear.In this study,direct disintegration of biopolymers and indirect broken of connection point were investigated on the hydrolysis and component separation.Three typical sewer sediment treatment approaches,i.e.,alkaline,thermal and cation exchange treatments were proposed,which represented the hydrolysis-driving forces of chemical hydrolysis,physical hydrolysis and innovative cation bridging break-age.The results showed that the organic and inorganic separation rates of sewer sediment driven by alkaline,thermal and cation exchange treatments reached 21.26%,23.80%,and 19.56%-48.0%,respectively,compared to 4.43%in control.The secondary structure of proteins was disrupted,transitioning from𝛼α-helix to𝛽β-turn and random coil.Meanwhile,much biopolymers were released from solid to the liquid phase.From thermody-namic perspective,sewer sediment deposition was controlled by short-range interfacial interactions described by extended Derjaguin-Landau-Verwey-Overbeek theory.Additionally,the separation of organic and inorganic components was positively correlated with the thermodynamic parameters(Corr=0.87),highlighted the robust-ness of various driving forces.And the flocculation energy barriers were 2.40(alkaline),1.60 times(thermal),and 4.02–4.97 times(cation exchange)compared to control group.The findings revealed the contrition differ-ence of direct disintegration of gelatinous biopolymers and indirect breakage of composition connection sites in sediment composition separation,filling the critical gaps in understanding the specific mechanisms of sediment biopolymer disintegration and intermolecular connection breakage.展开更多
The dependence of interface structure and mechanical properties on the modulation layer thickness of VN/TiN−Ni nano-multilayered films deposited on Si substrates using a reactive magnetron sputtering technique was sys...The dependence of interface structure and mechanical properties on the modulation layer thickness of VN/TiN−Ni nano-multilayered films deposited on Si substrates using a reactive magnetron sputtering technique was systematically investigated. The films were characterized using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and nanoindentation. The results show that the TiN−Ni layer grows epitaxially on the VN layer, forming a coherent interface between the two sublayers. When the deposition time ratio of the two sublayers (TTiN−Ni꞉TVN) is 10꞉12, the films exhibit remarkable mechanical properties, with hardness, elastic modulus, and fracture toughness values of 25.9 GPa, 317 GPa, and 1.88 MPa·m^(1/2), respectively. Meanwhile, fracture toughness is improved by approximately 50% compared to the VN monolithic film. This enhancement is attributed to the coherent interface between the sublayers and the phase separation in the TiN−Ni layer.展开更多
This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow con...This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.展开更多
This study examines the dynamic response of two adjacent 9-and 20-story benchmark steel buildings subjected to six near-fault earthquake records.Two-dimensional numerical models were employed to account for the comple...This study examines the dynamic response of two adjacent 9-and 20-story benchmark steel buildings subjected to six near-fault earthquake records.Two-dimensional numerical models were employed to account for the complexities of structure-soil-structure interaction(SSSI).The research focuses on the separation gap between the buildings and the effects of pounding while considering Fixed Base(FB)and SSSI models,evaluated according to UBC 94 and ASCE 7-16 seismic codes.Key findings reveal that pounding occurs with the UBC 94 separation gap when earthquake frequency aligns with system frequency,leading to increased column stresses in the 9-story building.In contrast,the ASCE 7-16 standard effectively prevents pounding in both the FB and SSSI models.Additionally,drifts and displacements of lower floors in SSSI models exceed the allowable limits of ASCE 7-16,underscoring the impact of soil-structure interaction on seismic response.展开更多
Coal serves not only as a crucial energy resource but also as a significant reservoir of critical metal elements,including Lithium(Li),Gallium(Ga),Germanium(Ge),and rare earth elements(REE).This paper provides a syste...Coal serves not only as a crucial energy resource but also as a significant reservoir of critical metal elements,including Lithium(Li),Gallium(Ga),Germanium(Ge),and rare earth elements(REE).This paper provides a systematic review of the enrichment characteristics,occurrence modes,and comprehensive utilization potential of these critical metals in coal.Globally,the distribution of these metal resources exhibits significant regional heterogeneity.While the concentration in most coals falls below industrial cut-off grades,anomalous enrichment in specific coal basins results in Li,Ga,Ge,and REE concentrations far exceeding global averages,highlighting their considerable potential as unconventional metal deposits.The occurrence modes of these metals are diverse:Li is primarily hosted in mineral phases;Ga exists in inorganic,organic,and complex forms;Ge shows a strong association with organic matter;and REE are mainly present in adsorbed/isomorphic forms within clay minerals,while also displaying organic affinity.Direct extraction of metals from raw coal is often cost-prohibitive;effective recovery is therefore more feasible when integrated with coal processing.Metals are further enriched in solid wastes such as coal gangue,fly ash,and bottom ash,from which recovery is more economically and technically viable.Current comprehensive utilization primarily employs integrated mineral processing-hydrometallurgy approaches.Future research should focus on elucidating the precise occurrence forms of metals in coal and solid wastes,optimizing pre-treatment methods,and selecting effective activators and leachants.Advancing the synergistic extraction and green recovery of multiple associated resources from coal and its by-products is essential for achieving high-value,comprehensive utilization of coal-based resources.展开更多
Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been d...Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.展开更多
Lignocellulosic biomass is the most abundant re-newable resource on Earth,boasting advan-tages such as wide avail-ability and negative car-bon emissions.Especial-ly,efficient separation of lignocellulose into cellu-lo...Lignocellulosic biomass is the most abundant re-newable resource on Earth,boasting advan-tages such as wide avail-ability and negative car-bon emissions.Especial-ly,efficient separation of lignocellulose into cellu-lose,hemicellulose and lignin,and realizing val-orization of these compo-nents are more responsive to the development needs of biomass refinery and the green chem-istry era.This review outlines the main components of lignocellulose and briefly summerizes their utilization in chemical raw materials and energy production.It mainly focused on cur-rent advances in component separation methods of lignocellulose by organic solvents,ionic liquids and deep eutectic solvents.The design of separation methods,understanding of sepa-ration mechanisms,and optimization of reaction systems in each method are highlighted in detail.Furthermore,the ongoing challenges and future directions based on mechanism and in-dustrialization are critically discussed.Our goal is to elucidate the separation mechanisms and principles of method design,providing guidance for the development of highly efficient com-ponent separation methods of lignocellulose.展开更多
Herein,we demonstrated the integration of BiVO_(4)-based photoanode with metallic Zn cathode for high-performance CO_(2)reduction,and a record CO production rate of 113.32μmol cm^(−2)h^(−1)with a FECO of 90.57%has be...Herein,we demonstrated the integration of BiVO_(4)-based photoanode with metallic Zn cathode for high-performance CO_(2)reduction,and a record CO production rate of 113.32μmol cm^(−2)h^(−1)with a FECO of 90.57%has been achieved under simulated sunlight(AM 1.5 G,100 mW),accompanying with an excellent stability.More importantly,the direct observation of spatial charge separation/transfer and dynamic surface catalysis for both H_(2)O oxidation and CO_(2)reduction has been firstly achieved by the combination of in situ X-ray photoelectron spectroscopy(IS-XPS)with Fourier transform infrared reflection(IS-FTIR).Under light irradiation,the electron-hole pairs have been generated on BiVO_(4) photoanode,and holes rapidly transfer to photoanode surfaces for participating in oxygen evolution reaction(OER)through the formation of*OH and*OOH intermediates.Simultaneously,the proton-coupled electron transfer to the Zn cathode surfaces drive the reduction of adsorbed CO_(2)molecules into CO via the formation*COOH and*CO intermediates.Thereby,this work offers new insights into fundamental understanding of CO_(2)reduction process,which facilitates the future development of highly efficient carbon fixation systems.展开更多
To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocom...To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.展开更多
Zn-I_(2) batteries have emerged as promising next-generation energy storage systems owing to their inherent safety,environmental compatibility,rapid reaction kinetics,and small voltage hysteresis.Nevertheless,two crit...Zn-I_(2) batteries have emerged as promising next-generation energy storage systems owing to their inherent safety,environmental compatibility,rapid reaction kinetics,and small voltage hysteresis.Nevertheless,two critical challenges,i.e.,zinc dendrite growth and polyiodide shuttle effect,severely impede their commercial viability.To conquer these limitations,this study develops a multifunctional separator fabricated from straw-derived carboxylated nanocellulose,with its negative charge density further reinforced by anionic polyacrylamide incorporation.This modification simultaneously improves the separator’s mechanical properties,ionic conductivity,and Zn^(2+)ion transfer number.Remarkably,despite its ultrathin 20μm profile,the engineered separator demonstrates exceptional dendrite suppression and parasitic reaction inhibition,enabling Zn//Zn symmetric cells to achieve impressive cycle life(>1800 h at 2 m A cm^(-2)/2 m Ah cm^(-2))while maintaining robust performance even at ultrahigh areal capacities(25 m Ah cm^(-2)).Additionally,the separator’s anionic characteristic effectively blocks polyiodide migration through electrostatic repulsion,yielding Zn-I_(2) batteries with outstanding rate capability(120.7 m Ah g^(-1)at 5 A g^(-1))and excellent cyclability(94.2%capacity retention after 10,000 cycles).And superior cycling stability can still be achieved under zinc-deficient condition and pouch cell configuration.This work establishes a new paradigm for designing high-performance zinc-based energy storage systems through rational separator engineering.展开更多
Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile pro...Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.展开更多
Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or ...Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.展开更多
Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated fo...Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.展开更多
Objective:To analyze the impact of maternal-infant separation on the physical and mental state of high-risk pregnancy patients and explore the clinical efficacy of targeted nursing interventions.Methods:A total of 80 ...Objective:To analyze the impact of maternal-infant separation on the physical and mental state of high-risk pregnancy patients and explore the clinical efficacy of targeted nursing interventions.Methods:A total of 80 high-risk pregnancy patients treated in our hospital from January 2023 to January 2024 were selected as the study subjects.These patients were randomly divided into an observation group and a control group(40 cases each)using a random number table.The control group received routine high-risk pregnancy nursing care,while the observation group received specialized maternal-infant separation nursing interventions in addition to routine care.The psychological and physiological states and nursing satisfaction of the two groups were compared before and after the intervention.Results:The SAS scores,SDS scores,and sleep quality scores of the observation group were significantly lower than those of the control group,with statistically significant differences(p<0.05).The incidence of postpartum hemorrhage in the observation group was significantly lower than that in the control group,and the initiation time of lactation was significantly earlier than that in the control group,with both differences being statistically significant(p<0.05).The nursing satisfaction of the observation group was significantly higher than that of the control group(80%vs.32/40),with a statistically significant difference(p<0.05).Conclusion:Maternal-infant separation exacerbates anxiety and depression in high-risk pregnancy patients,reduces sleep quality,increases the risk of postpartum hemorrhage,and delays the initiation of lactation.Specialized nursing interventions for maternal-infant separation can improve the physical and mental state of high-risk pregnancy patients,reduce the incidence of postpartum complications,and enhance nursing satisfaction,making them worthy of clinical application and promotion.展开更多
Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements ...Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.展开更多
The GRACE(Gravity Recovery and Climate Experiment)space mission recorded temporal variation characteristics of the global gravity field at decadal timescales.The gravity data have been shown to capture the dynamics of...The GRACE(Gravity Recovery and Climate Experiment)space mission recorded temporal variation characteristics of the global gravity field at decadal timescales.The gravity data have been shown to capture the dynamics of flows within the outer core and their effects on the core-mantle boundary.We first aim to remove global surface process gravity signals from the GRACE data.We then construct the global core magnetic field according to the CHAOS-7 model.Finally,we apply the blind source separation method to decompose the processed gravity signals and core magnetic signals and compute the power spectral density of the gravity and magnetic field signals by using the Lomb-Scargle periodogram approach.We have discovered a signal cycle(of~6 years)in the principal components of the core magnetic and gravity signals,potentially as a result of deep Earth processes.The main principal components of the core magnetic and gravity signals reveal that the variation trends in the second-order time derivative of the core magnetic field are similar to those in the gravity field.After 2014,the second-order time derivative of the core magnetic field exhibited linear and rapid change characteristics,which were the same as the change in the gravity field and are consistent with existing research results.展开更多
Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent ...Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent organic framework(COF) scaffold membrane with gate-lane nanostructure for efficient Li^(+)/Mg^(2+) separation. COF nanosheets, serving as the scaffold, are intercalated by polyethyleneimine(PEI) to form the permeating layer. Subsequently, PEI on the surface reacts with 1,4-phenylene diisocyanate to form the polyurea gating layer. The gating layer, bearing tailored smaller pore size,affords high rejection to co-ions(Mg^(2+)) and thus high Li^(+)/Mg^(2+) selectivity. The permeating layer, with asymmetric charge and spatial nanostructure for creating individual lanes of Li^(+) and Cl~-, facilitates Li^(+) transport and thus high Li^(+) permeability. The optimum COF scaffold membrane exhibits the permeance of 11.5 L m^(-2) h^(-1)/bar^(-1) and true selectivity of 231.9 with Li^(+) enrichment of 120.2% at the Mg^(2+)/Li^(+) mass ratio of 50, exceeding the ideal selectivity of 80.5 and outperforming all ever-reported positively charged nanofiltration membranes. Our work may stimulate the further thinking about how to design the hierarchical membrane structure to achieve favorable ion mixing effect and break the membrane permeability-selectivity trade-off in chemical separations.展开更多
The development of ZnO-based composites with high charge separation and effective inhibition of toxic by-products is admirable for effective photocatalysis of nitrogen oxides(NO_(x))oxidation.In this study,carbon quan...The development of ZnO-based composites with high charge separation and effective inhibition of toxic by-products is admirable for effective photocatalysis of nitrogen oxides(NO_(x))oxidation.In this study,carbon quan-tum dots(CQDs)/ZnO hollow microspheres,synthesized through a rapid microwave-assisted method,achievedover a 30-fold higher NO_(x) removal efficiency compared to ZnO,with complete inhibition of NO_(2) by-products andgood durability.The enhanced photocatalytic activity was ascribed to the unique role of CQDs,as revealed byin-situ photoelectric techniques.Results demonstrated that the electron directional migration from ZnO to CQDsat the composite interface accounts for the enhanced charge separation.Active free radicals for NO_(x) oxidationwere identified,and in-situ diffuse reflectance infrared Fourier transform spectroscopy analysis elucidated theconversion pathways of NO_(x) oxidation under visible light irradiation.This work sheds light on the mechanismsof electron transfer and charge separation at the composite interface,offering guidance for designing superiorZnO-based photocatalysts for complete NO_(x) removal.展开更多
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金supported by the National Natural Science Foundation of China(ZX20230386)the 2023 Special Project for High-Industrial Base Reconstruction Quality Development of the Manufacturing Industry(2023ZY01019-11)the sixth batch of top talent support funds(QNBJ-2022-04).
文摘As an important strategic rare-earth resource,bastnaesite has long been a global research focus.The carbochlorination process,as an efficient and low-cost extraction method,can be applied to treat bastnaesite,achieving ideal rare-earth extraction results in just one-step reaction.By using inexpensive chlorine gas as the chlorinating agent,it avoids lengthy procedural steps and the generation of acid-base waste liquids.Based on this,we propose a novel carbochlorination process for bastnaesite involving a fluorine-fixing agent.Thermodynamic data for the carbochlorination process of bastnaesite were calculated using the group contribution method.Thermodynamic feasibility was verified through Gibbs free energy.The effects of different chlorination times,fluorine-fixing agent dosages,chlorine flow rates,and chlorination temperatures on the carbochlorination process of bastnaesite were investigated.Experimental studies showed that under optimal chlorination conditions,a temperature of 800℃,a duration of 60 min,a fluorine-fixing agent dosage of 10%,and a chlorine flow rate of 10 L·min^(−1),the chlorination rates of rare-earth elements,Ca,Ba,and Fe in bastnaesite reached 96%,99%,98%,and 99%,respectively.The reaction mechanism was explored and analyzed based on characterization results such as mineral phase composition,micromorphology and thermogravimetry of water-washed residues under different chlorination conditions.Additionally,kinetic experiments were conducted at varying reaction temperatures and chlorine flow rates,revealing that the carbon-chlorination process is primarily controlled by chemical reactions.
基金supported by Shaanxi Key Research and Development Program(No.2024SF-YBXM-546)the National Natural Science Foundation of China(No.52470161)the State Key Laboratory of Pollution Control and Resource Reuse Foundation(No.PCRRF21007).
文摘With the legislative development,the organic and inorganic composition separation has become the primary requirement for sewer sediment disposal,however the relevant technology has been rarely reported and the driving mechanism was still unclear.In this study,direct disintegration of biopolymers and indirect broken of connection point were investigated on the hydrolysis and component separation.Three typical sewer sediment treatment approaches,i.e.,alkaline,thermal and cation exchange treatments were proposed,which represented the hydrolysis-driving forces of chemical hydrolysis,physical hydrolysis and innovative cation bridging break-age.The results showed that the organic and inorganic separation rates of sewer sediment driven by alkaline,thermal and cation exchange treatments reached 21.26%,23.80%,and 19.56%-48.0%,respectively,compared to 4.43%in control.The secondary structure of proteins was disrupted,transitioning from𝛼α-helix to𝛽β-turn and random coil.Meanwhile,much biopolymers were released from solid to the liquid phase.From thermody-namic perspective,sewer sediment deposition was controlled by short-range interfacial interactions described by extended Derjaguin-Landau-Verwey-Overbeek theory.Additionally,the separation of organic and inorganic components was positively correlated with the thermodynamic parameters(Corr=0.87),highlighted the robust-ness of various driving forces.And the flocculation energy barriers were 2.40(alkaline),1.60 times(thermal),and 4.02–4.97 times(cation exchange)compared to control group.The findings revealed the contrition differ-ence of direct disintegration of gelatinous biopolymers and indirect breakage of composition connection sites in sediment composition separation,filling the critical gaps in understanding the specific mechanisms of sediment biopolymer disintegration and intermolecular connection breakage.
基金financially supported by the National Natural Science Foundation of China(No.51971148)the Key Project Foundation of Hanjiang Normal University,China(No.XJ2024A09)+1 种基金the Excellent Young and Middle-aged Science and Technology Innovation Team Project in Higher Education Institutions of Hubei Province,China(No.T2020024)the Shanghai Engineering Research Center of High-Performance Medical Device Materials,China(No.20DZ2255500)。
文摘The dependence of interface structure and mechanical properties on the modulation layer thickness of VN/TiN−Ni nano-multilayered films deposited on Si substrates using a reactive magnetron sputtering technique was systematically investigated. The films were characterized using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and nanoindentation. The results show that the TiN−Ni layer grows epitaxially on the VN layer, forming a coherent interface between the two sublayers. When the deposition time ratio of the two sublayers (TTiN−Ni꞉TVN) is 10꞉12, the films exhibit remarkable mechanical properties, with hardness, elastic modulus, and fracture toughness values of 25.9 GPa, 317 GPa, and 1.88 MPa·m^(1/2), respectively. Meanwhile, fracture toughness is improved by approximately 50% compared to the VN monolithic film. This enhancement is attributed to the coherent interface between the sublayers and the phase separation in the TiN−Ni layer.
基金the Scientific Research Projects Unit of Erciyes University under contract no:FDS-2022-11532 and FOA-2025-14773.
文摘This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.
文摘This study examines the dynamic response of two adjacent 9-and 20-story benchmark steel buildings subjected to six near-fault earthquake records.Two-dimensional numerical models were employed to account for the complexities of structure-soil-structure interaction(SSSI).The research focuses on the separation gap between the buildings and the effects of pounding while considering Fixed Base(FB)and SSSI models,evaluated according to UBC 94 and ASCE 7-16 seismic codes.Key findings reveal that pounding occurs with the UBC 94 separation gap when earthquake frequency aligns with system frequency,leading to increased column stresses in the 9-story building.In contrast,the ASCE 7-16 standard effectively prevents pounding in both the FB and SSSI models.Additionally,drifts and displacements of lower floors in SSSI models exceed the allowable limits of ASCE 7-16,underscoring the impact of soil-structure interaction on seismic response.
基金supported by the Key Support Project of Regional Innovation and Development Joint Fund of the National Natural Science Foundation of China(No.U24A2095).
文摘Coal serves not only as a crucial energy resource but also as a significant reservoir of critical metal elements,including Lithium(Li),Gallium(Ga),Germanium(Ge),and rare earth elements(REE).This paper provides a systematic review of the enrichment characteristics,occurrence modes,and comprehensive utilization potential of these critical metals in coal.Globally,the distribution of these metal resources exhibits significant regional heterogeneity.While the concentration in most coals falls below industrial cut-off grades,anomalous enrichment in specific coal basins results in Li,Ga,Ge,and REE concentrations far exceeding global averages,highlighting their considerable potential as unconventional metal deposits.The occurrence modes of these metals are diverse:Li is primarily hosted in mineral phases;Ga exists in inorganic,organic,and complex forms;Ge shows a strong association with organic matter;and REE are mainly present in adsorbed/isomorphic forms within clay minerals,while also displaying organic affinity.Direct extraction of metals from raw coal is often cost-prohibitive;effective recovery is therefore more feasible when integrated with coal processing.Metals are further enriched in solid wastes such as coal gangue,fly ash,and bottom ash,from which recovery is more economically and technically viable.Current comprehensive utilization primarily employs integrated mineral processing-hydrometallurgy approaches.Future research should focus on elucidating the precise occurrence forms of metals in coal and solid wastes,optimizing pre-treatment methods,and selecting effective activators and leachants.Advancing the synergistic extraction and green recovery of multiple associated resources from coal and its by-products is essential for achieving high-value,comprehensive utilization of coal-based resources.
基金supported by the National Natural Science Foundation of China (52172228)the Natural Science Foundation of Fujian Province (2024J01475 and 2023J05127)
文摘Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.
基金supported by National Key Technolo-gy R&D Program of China(2023YFD1701505)De-velopment Projects in Anhui Province(2022107020013).
文摘Lignocellulosic biomass is the most abundant re-newable resource on Earth,boasting advan-tages such as wide avail-ability and negative car-bon emissions.Especial-ly,efficient separation of lignocellulose into cellu-lose,hemicellulose and lignin,and realizing val-orization of these compo-nents are more responsive to the development needs of biomass refinery and the green chem-istry era.This review outlines the main components of lignocellulose and briefly summerizes their utilization in chemical raw materials and energy production.It mainly focused on cur-rent advances in component separation methods of lignocellulose by organic solvents,ionic liquids and deep eutectic solvents.The design of separation methods,understanding of sepa-ration mechanisms,and optimization of reaction systems in each method are highlighted in detail.Furthermore,the ongoing challenges and future directions based on mechanism and in-dustrialization are critically discussed.Our goal is to elucidate the separation mechanisms and principles of method design,providing guidance for the development of highly efficient com-ponent separation methods of lignocellulose.
基金supported by the National Natural Science Foundation of China(21832005,22372181,22072168,22002175)Major Program of the Lanzhou Institute of Chemical Physics,CAS(ZYFZFX-3),Major Science and Technology Projects in Gansu Province(22ZD6GA003)the CAS“Light of West China”Program and West Light Foundation of The Chinese Academy of Sciences(xbzg-zdsys-202209).
文摘Herein,we demonstrated the integration of BiVO_(4)-based photoanode with metallic Zn cathode for high-performance CO_(2)reduction,and a record CO production rate of 113.32μmol cm^(−2)h^(−1)with a FECO of 90.57%has been achieved under simulated sunlight(AM 1.5 G,100 mW),accompanying with an excellent stability.More importantly,the direct observation of spatial charge separation/transfer and dynamic surface catalysis for both H_(2)O oxidation and CO_(2)reduction has been firstly achieved by the combination of in situ X-ray photoelectron spectroscopy(IS-XPS)with Fourier transform infrared reflection(IS-FTIR).Under light irradiation,the electron-hole pairs have been generated on BiVO_(4) photoanode,and holes rapidly transfer to photoanode surfaces for participating in oxygen evolution reaction(OER)through the formation of*OH and*OOH intermediates.Simultaneously,the proton-coupled electron transfer to the Zn cathode surfaces drive the reduction of adsorbed CO_(2)molecules into CO via the formation*COOH and*CO intermediates.Thereby,this work offers new insights into fundamental understanding of CO_(2)reduction process,which facilitates the future development of highly efficient carbon fixation systems.
基金The National Key Research and Development Program of China(2020YFC0862903)Supported by Jiangsu Future Membrane Technology Innovation Center(BM2021804)National Foreign Expert Program(H20240294).
文摘To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.
基金the financial support from the Natural Science Foundation of Jiangsu Province(BK20231292)the Jiangsu Agricultural Science and Technology Innovation Fund(CX(24)3091)+6 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX25_1429)the National Key R&D Program of China(2024YFE0109200)the Fundamental Research Funds for the Central Universities(No.2024300440)Guangdong Basic and Applied Basic Research Foundation(2025A1515011098)the National Natural Science Foundation of China(12464032)the Natural Science Foundation of Jiangxi Province(20232BAB201032)Ji'an Science and Technology Plan Project(2024H-100301)。
文摘Zn-I_(2) batteries have emerged as promising next-generation energy storage systems owing to their inherent safety,environmental compatibility,rapid reaction kinetics,and small voltage hysteresis.Nevertheless,two critical challenges,i.e.,zinc dendrite growth and polyiodide shuttle effect,severely impede their commercial viability.To conquer these limitations,this study develops a multifunctional separator fabricated from straw-derived carboxylated nanocellulose,with its negative charge density further reinforced by anionic polyacrylamide incorporation.This modification simultaneously improves the separator’s mechanical properties,ionic conductivity,and Zn^(2+)ion transfer number.Remarkably,despite its ultrathin 20μm profile,the engineered separator demonstrates exceptional dendrite suppression and parasitic reaction inhibition,enabling Zn//Zn symmetric cells to achieve impressive cycle life(>1800 h at 2 m A cm^(-2)/2 m Ah cm^(-2))while maintaining robust performance even at ultrahigh areal capacities(25 m Ah cm^(-2)).Additionally,the separator’s anionic characteristic effectively blocks polyiodide migration through electrostatic repulsion,yielding Zn-I_(2) batteries with outstanding rate capability(120.7 m Ah g^(-1)at 5 A g^(-1))and excellent cyclability(94.2%capacity retention after 10,000 cycles).And superior cycling stability can still be achieved under zinc-deficient condition and pouch cell configuration.This work establishes a new paradigm for designing high-performance zinc-based energy storage systems through rational separator engineering.
基金financially supported by the National Natural Science Foundation of China(No.52303063)Hubei Provincial Department of Education Guided Scientific Research Project(No.B2024056)。
文摘Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.
文摘Conventional locking/release mechanisms often face challenges in aircraft wing separation processes,such as excessive impact loads and insufficient synchronization.These may cause structural damage to the airframe or attitude instability,seriously compromising mission reliability.To address this engineering challenge,this paper proposes a multi-point low-impact locking/release mechanism based on the mobility model and energy conversion strategy.Through establishing a DOF constraint framework system,this paper systematically analyzes the energy transfer and conversion characteristics during the wing separation process,reveals the generation mechanism of impact loads,and conducts research on low-impact design based on energy conversion strategy.Building on this foundation,a single-point locking/release mechanism employing parallel trapezoidal key shaft structure was designed,which increases frictional contact time and reduces the energy release rate,thereby achieving low-impact characteristics.The mechanism's performance was validated through physical prototype development and systematic functional testing(including unlocking force,synchronization,and impact tests).Experimental results demonstrate:(1)Under 14 kN preload condition,the maximum unlocking force was only 92.54 N,showing a linear relationship with preload that satisfies the"strong-connection/weak-unlock"design requirement;(2)Wing separation was completed within 46 ms,with synchronization time difference among three separation mechanisms stably controlled within 12-14 ms,proving rapid and reliable operation;(3)The unlocking impact acceleration ranged between 26 and 73 g,below the 100 g design limit,confirming the effectiveness of the energy conversion strategy.The proposed low-impact locking/release mechanism design method based on energy conversion strategy resolves the traditional challenges of high impact and synchronization deficiencies.The synergistic optimization mechanism of"structural load reduction and performance improvement"provides a highly reliable technical solution for wing separable mechanisms while offering novel design insights for wing connection/separation systems engineering.
基金supported by the National Natural Science Foundation of China (Nos.22064020,22364022,and 22174125)the Applied Basic Research Foundation of Yunnan Province (Nos.202101AT070101 and 202201AT070029)。
文摘Developing a chiral material as versatile and universal chiral stationary phase(CSP) for chiral separation in diverse chromatographic techniques simultaneously is of great significance.In this study,we demonstrated for the first time that a chiral metal-organic cage(MOC),[Zn_(6)M_(4)],as a universal chiral recognition material for both multi-mode high-performance liquid chromatography(HPLC) and capillary gas chromatography(GC) enantioseparation.Two novel HPLC CSPs with different bonding arms(CSP-A with a cationic imidazolium bonding arm and CSP-B with an alkyl chain bonding arm) were prepared by clicking of functionalized chiral MOC [Zn_(6)M_(4)] onto thiolated silica via thiol-ene click chemistry.Meanwhile,a capillary GC column statically coated with the chiral MOC [Zn_(6)M_(4)] was also fabricated.The results showed that the chiral MOC exhibits excellent enantioselectivity not only in normal phase HPLC(NP-HPLC) and reversed phase(RP-HPLC) but also in GC,and various racemates were well separated,including alcohols,diols,esters,ketones,ethers,amines,and epoxides.Importantly,CSP-A and CSP-B are complementary to commercially available Chiralcel OD-H and Chiralpak AD-H columns in enantioseparation,which can separate some racemates that could not be or could not well be separated by the two widely used commercial columns,suggesting the great potential of the two prepared CSPs in enantioseparation.This work reveals that the chiral MOC is potential versatile chiral recognition materials for both HPLC and GC,and also paves the way to expand the potential applications of MOCs.
文摘Objective:To analyze the impact of maternal-infant separation on the physical and mental state of high-risk pregnancy patients and explore the clinical efficacy of targeted nursing interventions.Methods:A total of 80 high-risk pregnancy patients treated in our hospital from January 2023 to January 2024 were selected as the study subjects.These patients were randomly divided into an observation group and a control group(40 cases each)using a random number table.The control group received routine high-risk pregnancy nursing care,while the observation group received specialized maternal-infant separation nursing interventions in addition to routine care.The psychological and physiological states and nursing satisfaction of the two groups were compared before and after the intervention.Results:The SAS scores,SDS scores,and sleep quality scores of the observation group were significantly lower than those of the control group,with statistically significant differences(p<0.05).The incidence of postpartum hemorrhage in the observation group was significantly lower than that in the control group,and the initiation time of lactation was significantly earlier than that in the control group,with both differences being statistically significant(p<0.05).The nursing satisfaction of the observation group was significantly higher than that of the control group(80%vs.32/40),with a statistically significant difference(p<0.05).Conclusion:Maternal-infant separation exacerbates anxiety and depression in high-risk pregnancy patients,reduces sleep quality,increases the risk of postpartum hemorrhage,and delays the initiation of lactation.Specialized nursing interventions for maternal-infant separation can improve the physical and mental state of high-risk pregnancy patients,reduce the incidence of postpartum complications,and enhance nursing satisfaction,making them worthy of clinical application and promotion.
基金the support of the Major Science and Technology Project of Yunnan Province,China(Grant No.202502AD080007)the National Natural Science Foundation of China(Grant No.52378288)。
文摘Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.
基金the National Natural Science Foundation of China(Grant Nos.42274003,41974007,and 41774019).
文摘The GRACE(Gravity Recovery and Climate Experiment)space mission recorded temporal variation characteristics of the global gravity field at decadal timescales.The gravity data have been shown to capture the dynamics of flows within the outer core and their effects on the core-mantle boundary.We first aim to remove global surface process gravity signals from the GRACE data.We then construct the global core magnetic field according to the CHAOS-7 model.Finally,we apply the blind source separation method to decompose the processed gravity signals and core magnetic signals and compute the power spectral density of the gravity and magnetic field signals by using the Lomb-Scargle periodogram approach.We have discovered a signal cycle(of~6 years)in the principal components of the core magnetic and gravity signals,potentially as a result of deep Earth processes.The main principal components of the core magnetic and gravity signals reveal that the variation trends in the second-order time derivative of the core magnetic field are similar to those in the gravity field.After 2014,the second-order time derivative of the core magnetic field exhibited linear and rapid change characteristics,which were the same as the change in the gravity field and are consistent with existing research results.
基金financial support from the National Natural Science Foundation of China (22338011, 22378299)Hainan Province Science and Technology Special Fund (ZDYF2025SHFZ025)+1 种基金Ningbo Key Research and Development Project (2022Z121)the China Postdoctoral Science Foundation (2025M771194)。
文摘Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent organic framework(COF) scaffold membrane with gate-lane nanostructure for efficient Li^(+)/Mg^(2+) separation. COF nanosheets, serving as the scaffold, are intercalated by polyethyleneimine(PEI) to form the permeating layer. Subsequently, PEI on the surface reacts with 1,4-phenylene diisocyanate to form the polyurea gating layer. The gating layer, bearing tailored smaller pore size,affords high rejection to co-ions(Mg^(2+)) and thus high Li^(+)/Mg^(2+) selectivity. The permeating layer, with asymmetric charge and spatial nanostructure for creating individual lanes of Li^(+) and Cl~-, facilitates Li^(+) transport and thus high Li^(+) permeability. The optimum COF scaffold membrane exhibits the permeance of 11.5 L m^(-2) h^(-1)/bar^(-1) and true selectivity of 231.9 with Li^(+) enrichment of 120.2% at the Mg^(2+)/Li^(+) mass ratio of 50, exceeding the ideal selectivity of 80.5 and outperforming all ever-reported positively charged nanofiltration membranes. Our work may stimulate the further thinking about how to design the hierarchical membrane structure to achieve favorable ion mixing effect and break the membrane permeability-selectivity trade-off in chemical separations.
基金supported by the National Natural Science Foundation of China(No.42403080)the Youth Innovation Promotion Asso-ciation of the Chinese Academy of Sciences(No.2022415)+1 种基金the Key Research and Development Program of Shaanxi Province(No.S2023-YF-LLRH-QCYK-0263)the Key Research and Development Programof Shaanxi Province(No.2023QCY-LL-16).
文摘The development of ZnO-based composites with high charge separation and effective inhibition of toxic by-products is admirable for effective photocatalysis of nitrogen oxides(NO_(x))oxidation.In this study,carbon quan-tum dots(CQDs)/ZnO hollow microspheres,synthesized through a rapid microwave-assisted method,achievedover a 30-fold higher NO_(x) removal efficiency compared to ZnO,with complete inhibition of NO_(2) by-products andgood durability.The enhanced photocatalytic activity was ascribed to the unique role of CQDs,as revealed byin-situ photoelectric techniques.Results demonstrated that the electron directional migration from ZnO to CQDsat the composite interface accounts for the enhanced charge separation.Active free radicals for NO_(x) oxidationwere identified,and in-situ diffuse reflectance infrared Fourier transform spectroscopy analysis elucidated theconversion pathways of NO_(x) oxidation under visible light irradiation.This work sheds light on the mechanismsof electron transfer and charge separation at the composite interface,offering guidance for designing superiorZnO-based photocatalysts for complete NO_(x) removal.
