NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a nec...NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.展开更多
Understanding the stress distribution derived from monitoring the principal stress(PS)in slopes is of great importance.In this study,a miniature sensor for quantifying the two-dimensional(2D)PS in landslide model test...Understanding the stress distribution derived from monitoring the principal stress(PS)in slopes is of great importance.In this study,a miniature sensor for quantifying the two-dimensional(2D)PS in landslide model tests is proposed.The fundamental principle and design of the sensor are demonstrated.The sensor comprises three earth pressure gages and one gyroscope,with the utilization of three-dimensional(3D)printing technology.The difficulties of installation location during model preparation and sensor rotation during testing can be effectively overcome using this sensor.Two different arrangements of the sensors are tested in verification tests.Additionally,the application of the sensor in an excavated-induced slope model is tested.The results demonstrate that the sensor exhibits commendable performance and achieves a desirable level of accuracy,with a principal stress angle error of±5°in the verification tests.The stress transformation of the slope model,generated by excavation,is demonstrated in the application test by monitoring the two miniature principal stress(MPS)sensors.The sensor has a significant potential for measuring primary stress in landslide model tests and other geotechnical model experiments.展开更多
In order to study the transmission efficiency of engine and optimize the structure of driving wheel,the rotational speed storage test device of driving wheel in tracked vehicle based on magnetoelectric sensor was desi...In order to study the transmission efficiency of engine and optimize the structure of driving wheel,the rotational speed storage test device of driving wheel in tracked vehicle based on magnetoelectric sensor was designed.The device consisted of a mounting bracket,a sensor and a tester.The mounting bracket was installed in vehicle body after fixing the tester and sensor to mounting bracket beside the driving wheel.Using the storage test instrument,the wireless trigger technology was applied to synchronously record and stored the rotational speed data of the driving wheel in tracked vehicle.After the experiment was finished,the data was read out through the upper computer.Both valid data and satisfactory results were obtained through both simulated and actual vehicle tests.展开更多
Hepatitis C is a liver disease that is transmitted through contact with the blood of an infected person. An estimated 150 million individuals worldwide have been chronically infected with the hepatitis C virus(HCV). H...Hepatitis C is a liver disease that is transmitted through contact with the blood of an infected person. An estimated 150 million individuals worldwide have been chronically infected with the hepatitis C virus(HCV). Hepatitis C shows significant genetic variation in the global population, due to the high rate of viral RNA mutation. There are six variants of the virus(HCV genotypes 1, 2, 3, 4, 5, and 6), with 15 recorded subtypes that vary in prevalence across different regions of the world. A variety of devices are used to diagnose hepatitis C, including HCV antibody test, HCV viral load test, HCV genotype test and liver biopsy. Rapid, inexpensive, sensitive, and robust analytical devices are therefore essential for effective diagnosis and monitoring of disease treatment. This review provides an overview of current electrochemical immunosensor and genosensortechnologies employed in HCV detection.There are a limited number of publications showing electrochemical biosensors being used for the detection of HCV.Due to their simplicity,specificity,and reliability,electrochemical biosensor devices have potential clinical applications in several viral infections.展开更多
Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce th...Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce the needed testing time owing to its harsh conditions. Five test stations were established, and a floating buoy and fixed test equipment were designed. A control system, including a sensor connection, data processor, video remote transmission, and corresponding control algorithm, was developed. The control system enabled the nondestructive monitoring of biological attachments and bidirectional, real-time communication between an upper server on land and the control system at the test sites. The dissolved oxygen(DO), temperature, and pH data of DOS600 and DPS600 sensors were compared with those of AP2000 sensors. Temperature recording using the DOS600 sensor was performed nearly as well as that of the AP2000 sensor. The mean DO values(standard deviations) were 8.414 mg L-1(2.068) and 6.896 mg L-1(1.235) for the DOS600 and AP2000 sensors, respectively, indicating that the DOS600 performance was unsatisfactory. The pH recording of the DPS600 was slightly worse than that of the AP2000 sensor. Experimental results showed that the DO value was more easily affected by the buoy movement of waves compared to the pH and temperature. Moreover, data fluctuations showed that the DO and pH parameters were more vulnerable to biofouling than temperature. Waves and biofouling create a harsh test environment, and the performance difference between the developed sensors and a standard sensor can be obtained in a short time period.展开更多
For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar c...For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.展开更多
Sensor selection and optimization is one of the important parts in design for testability. To address the problems that the traditional sensor optimization selection model does not take the requirements of prognostics...Sensor selection and optimization is one of the important parts in design for testability. To address the problems that the traditional sensor optimization selection model does not take the requirements of prognostics and health management especially fault prognostics for testability into account and does not consider the impacts of sensor actual attributes on fault detectability, a novel sensor optimization selection model is proposed. Firstly, a universal architecture for sensor selection and optimization is provided. Secondly, a new testability index named fault predictable rate is defined to describe fault prognostics requirements for testability. Thirdly, a sensor selection and optimization model for prognostics and health management is constructed, which takes sensor cost as objective function and the defined testability indexes as constraint conditions. Due to NP-hard property of the model, a generic algorithm is designed to obtain the optimal solution. At last, a case study is presented to demonstrate the sensor selection approach for a stable tracking servo platform. The application results and comparison analysis show the proposed model and algorithm are effective and feasible. This approach can be used to select sensors for prognostics and health management of any system.展开更多
Point-of-care testing(POCT)is the practice of diagnosing and monitoring diseases where the patient is located,as opposed to traditional treatment conducted solely in a medical laboratory or other clinical setting.POCT...Point-of-care testing(POCT)is the practice of diagnosing and monitoring diseases where the patient is located,as opposed to traditional treatment conducted solely in a medical laboratory or other clinical setting.POCT has been less common in the recent past due to a lack of portable medical devices capable of facilitating effective medical testing.However,recent growth has occurred in this field due to advances in diagnostic technologies,device miniaturization,and progress in wearable electronics.Among these developments,electrochemical sensors have attracted interest in the POCT field due to their high sensitivity,compact size,and affordability.They are used in various applications,from disease diagnosis to health status monitoring.In this paper we explore recent advancements in electrochemical sensors,the methods of fabricating them,and the various types of sensing mechanisms that can be used.Furthermore,we delve into methods for immobilizing specific biorecognition elements,including enzymes,antibodies,and aptamers,onto electrode surfaces and how these sensors are used in real-world POCT settings.展开更多
Viral diseases represent one of the major threats for salmonids aquaculture.Early detection and identification of viral pathogens is the main prerequisite prior to undertaking effective prevention and control measures...Viral diseases represent one of the major threats for salmonids aquaculture.Early detection and identification of viral pathogens is the main prerequisite prior to undertaking effective prevention and control measures.Rapid,sensitive,efficient and portable detection method is highly essential for fish viral diseases detection.Biosensor strategies are highly prevalent and fulfill the expanding demands of on-site detection with fast response,cost-effectiveness,high sensitivity,and selectivity.With the development of material science,the nucleic acid biosensors fabricated by semiconductor have shown great potential in rapid and early detection or screening for diseases at salmonids fisheries.This paper reviews the current detection development of salmonids viral diseases.The present limitations and challenges of salmonids virus diseases surveillance and early detection are presented.Novel nucleic acid semiconductor biosensors are briefly reviewed.The perspective and potential application of biosensors in the on-site detection of salmonids diseases are discussed.展开更多
The vehicular sensor network (VSN) is an important part of intelligent transportation, which is used for real-timedetection and operation control of vehicles and real-time transmission of data and information. In the ...The vehicular sensor network (VSN) is an important part of intelligent transportation, which is used for real-timedetection and operation control of vehicles and real-time transmission of data and information. In the environmentofVSN, massive private data generated by vehicles are transmitted in open channels and used by other vehicle users,so it is crucial to maintain high transmission efficiency and high confidentiality of data. To deal with this problem, inthis paper, we propose a heterogeneous fault-tolerant aggregate signcryption scheme with an equality test (HFTASET).The scheme combines fault-tolerant and aggregate signcryption,whichnot onlymakes up for the deficiency oflow security of aggregate signature, but alsomakes up for the deficiency that aggregate signcryption cannot tolerateinvalid signature. The scheme supports one verification pass when all signcryptions are valid, and it supportsunbounded aggregation when the total number of signcryptions grows dynamically. In addition, this schemesupports heterogeneous equality test, and realizes the access control of private data in different cryptographicenvironments, so as to achieve flexibility in the application of our scheme and realize the function of quick searchof plaintext or ciphertext. Then, the security of HFTAS-ET is demonstrated by strict theoretical analysis. Finally, weconduct strict and standardized experimental operation and performance evaluation, which shows that the schemehas better performance.展开更多
Outbursts of methane and rocks are, similarly to rock bursts, the biggest hazards in deep mines and are equally difficult to predict. The violent process of the outburst itself, along with the scale and range of hazar...Outbursts of methane and rocks are, similarly to rock bursts, the biggest hazards in deep mines and are equally difficult to predict. The violent process of the outburst itself, along with the scale and range of hazards following the rapid discharge of gas and rocks, requires solutions which would enable quick and unambiguous detection of the hazard, immediate power supply cut-off and evacuation of personnel from potentially hazardous areas. For this purpose, an integrated outburst detector was developed. Assumed functions of the sensor which was equipped with three measuring and detection elements： a chamber for constant measurement of methane concentration, pressure sensor and microphone. Tests of the sensor model were carried out to estimate the parameters which characterize the dynamic properties of the sensor. Given the impossibility of carrying out the full scale experimental outburst, the sensor was tested during the methane and coal dust explosions in the testing gallery at KD Barbara. The obtained results proved that the applied solutions have been appropriate.展开更多
The need for efficient and reproducible development processes for sensor and perception systems is growing with their increased use in modern vehicles. Such processes can be achieved by using virtual test environments...The need for efficient and reproducible development processes for sensor and perception systems is growing with their increased use in modern vehicles. Such processes can be achieved by using virtual test environments and virtual sensor models. In the context of this, the present paper documents the development of a sensor model for depth estimation of virtual three-dimensional scenarios. For this purpose, the geometric and algorithmic principles of stereoscopic camera systems are recreated in a virtual form. The model is implemented as a subroutine in the Epic Games Unreal Engine, which is one of the most common Game Engines. Its architecture consists of several independent procedures that enable a local depth estimation, but also a reconstruction of a whole three-dimensional scenery. In addition, a separate programme for calibrating the model is presented. In addition to the basic principles, the architecture and the implementation, this work also documents the evaluation of the model created. It is shown that the model meets specifically defined requirements for real-time capability and the accuracy of the evaluation. Thus, it is suitable for the virtual testing of common algorithms and highly automated driving functions.展开更多
In this paper, we present hands-on experience related to on-going implementation in aircraft of power supply for a wireless sensor network deployed for aerodynamic flight tests. This autonomous battery-free power supp...In this paper, we present hands-on experience related to on-going implementation in aircraft of power supply for a wireless sensor network deployed for aerodynamic flight tests. This autonomous battery-free power supply is capturing, managing and storing primary energy from the environment, using solar light and PV （photovoltaic） cells. For practical purposes, it is also equipped with an auxiliary power input. The specifications are detailed, the general architecture is presented and justified, and test results are discussed.展开更多
Automotive-grade Complementary Metal-Oxide-Semiconductor(CMOS)sensors play a crucial role in automotive electronic systems,especially in the context of the rapid development of Advanced Driver Assistance Systems(ADAS)...Automotive-grade Complementary Metal-Oxide-Semiconductor(CMOS)sensors play a crucial role in automotive electronic systems,especially in the context of the rapid development of Advanced Driver Assistance Systems(ADAS)and autonomous driving technologies.Their performance is directly related to the safety and reliability of vehicles.However,automobiles will face a variety of complex environmental conditions during the actual operation,such as high temperature,low temperature,vibration,humidity changes,and light changes,which may have an impact on the performance of CMOS sensors.Therefore,it is of great significance to study the performance of automotive-grade CMOS sensors in different environments.展开更多
BACKGROUND: Pain and sensory disability are greatly affected by subjective factors, there are no quantitative indexes to evaluate cervical spondylotic radiculopathy(CSR). The judgment on clinical body examination and ...BACKGROUND: Pain and sensory disability are greatly affected by subjective factors, there are no quantitative indexes to evaluate cervical spondylotic radiculopathy(CSR). The judgment on clinical body examination and chief complaint always causes nonobjective results with great individual differences. Quantitative sensory testing (QST) can be used to judge the nerve function of fibril. The application of QST for the quantitative evaluation of peripheral nervous system disease needs to be further studied. OBJECTIVE: The cold-thermal sensation and pain of patients with CSR are quantitatively analyzed by using QST technology in order to evaluate the nerve function of fibril in patients with CSR. DESIGN: Case-control observation. SETTING: Pain Center of Beijing Hospital of Ministry of Health. PARTICIPANTS: Twenty patients with CSR, including 8 males and 12 females, aged from 33 to 70 years, who received treatment between January and April 2005 in Pain Center of Beijing Hospital of Ministry of Health were involved in CSR group. All the involved patients presented symptoms in unilateral upper extremity (left side 10 patients, right side 10 patients). They did not undergo physical therapy or nerve block therapy in 1 week before examination. Eight non-CSR patients who received treatment in Pain Center concurrently were involved in the control group (2 patients with trigeminal neuralgia, 4 with osteoarthrosis of knee joint and 2 with lumbar intervertebral disc protrusion), and another 12 healthy volunteers were involved. Four non-CSR patients and 12 healthy volunteers, 8 male and 12 female, were aged from 23 to 75 years. The informed consents were obtained from all the involved subjects. METHODS: The volar thresholds of cold sensation, thermal sensation, cryalgesia of thenar eminence of both upper extremities of all the subjects were examined separately by limit method with type TSA-Ⅱ temperature sensation analysator made by Medco Company (Israel). The subjects were pre-examined to be familiar with the method for sensory discrimination and affirmation. Thenar eminence vola of bilateral upper extremities were detected. The infrared detector of a semiconductor was contacted with skin. The infrared detector could be used to heat and cool skin. A group of cold-heat water circulation device was given electric current to produce temperature gradient, which was higher or lower than skin temperature. The initial temperature of infrared detector was 32 ℃, stimulation temperature was increased or decreased progressively at 1 ℃/s, and temperature change range was 0 to 50 ℃. In the first step, subjects pressed down the button to stop the stimulation when the temperature of infrared detector was decreased progressively until the subjects felt, and the threshold of cold sensation was obtained; In the second step, the threshold of thermal sensation was obtained when the temperature of infrared detector was increased progressively until the subjects felt; In the third step, the threshold of cryalgesia was obtained when the temperature of infrared detector was decreased progressively until subjects felt; and in the fourth step, the threshold of thermalgesia was obtained when the temperature of infrared detector was increased progressively until subjects felt. Each step was conducted 4 times and the mean threshold was obtained. Before each measurement, the temperature was made to rebound to the initial temperature and kept for 10 s. MAIN OUTCOME MEASURES: The thresholds of cold sensation, thermal sensation and cryalgesia, thermalgesia of thenar eminence vola of bilateral upper extremities of all the subjects. RESULTS: Twenty patients with CSR and 20 healthy subjects participated in the final results. ① In the CSR group, the threshold of cold sensation of affected side was lower than that of intact side [(29.00±1.26) ℃ vs.(30.00±1.06) ℃, P < 0.05], and the threshold of thermal sensation of affected side was higher than that of intact side [(35.04±0.87) ℃ vs. (34.14±0.99) ℃, P < 0.05]. There were no significant differences in the thresholds of cold and thermal sensation between affected side and intact side (P > 0.05). ②In the CSR group, the difference of threshold of cold sensation, thermal sensation, cryalgesia and thermalgesia between affected side and intact side was (-1.01±0.57), (0.89±0.39), (2.49±1.10) and (-1.62±0.86) ℃, respectively , the absolute value of which was higher than that of control group, respectively [(0.04±0.28),(0.05±0.26),(0.28±1.79),(0.17±1.10) ℃,P < 0.01]. In the CSR group, the threshold of cold sensation and thermalgesia of affected side was lower than that of intact side, respectively; and the threshold of thermal sensation and cryalgesia of affected side was higher than that of intact side, respectively. CONCLUSION: The superficial sensation of affected extremity of patients with CSR is lessened as compared with that of intact extremity. There are dysfunctions of small myelinated fiber (Aδ fiber) and demyelinated fiber (C fiber) in the affected-side extremity. QST, as a mean for quantitatively evaluating the function of Aδ fiber and C fiber, plays an objective evaluative role in the diagnosis and therapeutic effect observation of CSR.展开更多
Flexible fiber sensors,However,traditional methods face challenges in fabricating low-cost,large-scale fiber sensors.In recent years,the thermal drawing process has rapidly advanced,offering a novel approach to flexib...Flexible fiber sensors,However,traditional methods face challenges in fabricating low-cost,large-scale fiber sensors.In recent years,the thermal drawing process has rapidly advanced,offering a novel approach to flexible fiber sensors.Through the preform-tofiber manufacturing technique,a variety of fiber sensors with complex functionalities spanning from the nanoscale to kilometer scale can be automated in a short time.Examples include temperature,acoustic,mechanical,chemical,biological,optoelectronic,and multifunctional sensors,which operate on diverse sensing principles such as resistance,capacitance,piezoelectricity,triboelectricity,photoelectricity,and thermoelectricity.This review outlines the principles of the thermal drawing process and provides a detailed overview of the latest advancements in various thermally drawn fiber sensors.Finally,the future developments of thermally drawn fiber sensors are discussed.展开更多
Fault diagnosis of various systems on rolling stock has drawn the attention of many researchers. However, obtaining an optimized sensor set of these systems, which is a prerequisite for fault diagnosis, remains a majo...Fault diagnosis of various systems on rolling stock has drawn the attention of many researchers. However, obtaining an optimized sensor set of these systems, which is a prerequisite for fault diagnosis, remains a major challenge. Available literature suggests that the configuration of sensors in these systems is presently dependent on the knowledge and engineering experiences of designers, which may lead to insufficient or redundant development of various sensors. In this paper, the optimization of sensor sets is addressed by using the signed digraph （SDG） method. The method is modified for use in braking systems by the introduction of an effect-function method to replace the traditional quantitative methods. Two criteria are adopted to evaluate the capability of the sensor sets, namely, observability and resolution. The sensors configuration method of braking system is proposed. It consists of generating bipartite graphs from SDG models and then solving the set cover problem using a greedy algorithm. To demonstrate the improvement, the sensor configuration of the HP2008 braking system is investigated and fault diagnosis on a test bench is performed. The test results show that SDG algorithm can improve single-fault resolution from 6 faults to 10 faults, and with additional four brake cylinder pressure （BCP） sensors it can cover up to 67 double faults which were not considered by traditional fault diagnosis system. SDG methods are suitable for reducing redundant sensors and that the sensor sets thereby obtained are capable of detecting typical faults, such as the failure of a release valve. This study investigates the formal extension of the SDG method to the sensor configuration of braking system, as well as the adaptation supported by the effect-function method.展开更多
In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal...In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal pressure is proposed.This method uses a sinusoidal pressure dynamic system with two-way dual channel import and export synchronization technology to study the low frequency characteristics of a piezoelectric sensor of PCB company,and its lower cut-off frequency is 0.26 Hz.It is also studied that when the frequency of the measured vibration or shock signal is 1-200 kHz,the error range of signal positive pressure action time is 4.87%-0.03%.The dynamic compensation for the low frequency of the vibration sensor is carried out,and the compensation effect is good.展开更多
In this paper, an optical fiber sensor is designed by using optical Faraday effect. It is composed of fiber collimator, polarizer, magneto-optical crystal and mirror. Based on the magnetic flux leakage (MFL) theory, T...In this paper, an optical fiber sensor is designed by using optical Faraday effect. It is composed of fiber collimator, polarizer, magneto-optical crystal and mirror. Based on the magnetic flux leakage (MFL) theory, The optical fiber sensor was placed between two permanent magnets with the N-pole. Therefore, the optical fiber sensing system was built to detect the defective ferromagnetic objects. Theoretical and experimental studies shown that the system can identify a little defects, such as irons’ blind hole (diameter φ =?3mm , depth t = 4mm?), irons’ grooves (length l= 30mm , width?ω = 10mm ), hole (φ?=?3mm ) and crackle etc. The system has the characteristics of small size, high sensitivity, fast signal response and high resolution. In terms of the defective oil and gas pipelines detection, The optical fiber sensing system is used in non-destructive testing, which will be valuable and meaningful.展开更多
文摘NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.
基金supported by the National Nature Science Foundation of China(Grant No.42207216)the Major Program of the National Natural Science Foundation of China(Grant No.42090055)the National Nature Science Foundation of China(Grant No.42377182).
文摘Understanding the stress distribution derived from monitoring the principal stress(PS)in slopes is of great importance.In this study,a miniature sensor for quantifying the two-dimensional(2D)PS in landslide model tests is proposed.The fundamental principle and design of the sensor are demonstrated.The sensor comprises three earth pressure gages and one gyroscope,with the utilization of three-dimensional(3D)printing technology.The difficulties of installation location during model preparation and sensor rotation during testing can be effectively overcome using this sensor.Two different arrangements of the sensors are tested in verification tests.Additionally,the application of the sensor in an excavated-induced slope model is tested.The results demonstrate that the sensor exhibits commendable performance and achieves a desirable level of accuracy,with a principal stress angle error of±5°in the verification tests.The stress transformation of the slope model,generated by excavation,is demonstrated in the application test by monitoring the two miniature principal stress(MPS)sensors.The sensor has a significant potential for measuring primary stress in landslide model tests and other geotechnical model experiments.
基金Cultivation Programs for Young Scientific Research Personnel of Higher Education Institutions in Shanxi Province(No.2019QPJH18)Fund for“1331 Project”Key Innovative Research Team of Shanxi Province(No.1331KIPT)。
文摘In order to study the transmission efficiency of engine and optimize the structure of driving wheel,the rotational speed storage test device of driving wheel in tracked vehicle based on magnetoelectric sensor was designed.The device consisted of a mounting bracket,a sensor and a tester.The mounting bracket was installed in vehicle body after fixing the tester and sensor to mounting bracket beside the driving wheel.Using the storage test instrument,the wireless trigger technology was applied to synchronously record and stored the rotational speed data of the driving wheel in tracked vehicle.After the experiment was finished,the data was read out through the upper computer.Both valid data and satisfactory results were obtained through both simulated and actual vehicle tests.
基金Supported by Brazilian funding agencies(Sao Paulo Research Foundation-FAPESP and National Council for Scientific and Technological Development-CNPq)
文摘Hepatitis C is a liver disease that is transmitted through contact with the blood of an infected person. An estimated 150 million individuals worldwide have been chronically infected with the hepatitis C virus(HCV). Hepatitis C shows significant genetic variation in the global population, due to the high rate of viral RNA mutation. There are six variants of the virus(HCV genotypes 1, 2, 3, 4, 5, and 6), with 15 recorded subtypes that vary in prevalence across different regions of the world. A variety of devices are used to diagnose hepatitis C, including HCV antibody test, HCV viral load test, HCV genotype test and liver biopsy. Rapid, inexpensive, sensitive, and robust analytical devices are therefore essential for effective diagnosis and monitoring of disease treatment. This review provides an overview of current electrochemical immunosensor and genosensortechnologies employed in HCV detection.There are a limited number of publications showing electrochemical biosensors being used for the detection of HCV.Due to their simplicity,specificity,and reliability,electrochemical biosensor devices have potential clinical applications in several viral infections.
基金supported by the National Key Research and Development Plan(No.2019YFD0901300)the Shanghai Science and Technology Innovation Action Plan(No.16DZ1205100)the Shanghai Agriculture Applied Technology Development Program(No.T20180303)。
文摘Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce the needed testing time owing to its harsh conditions. Five test stations were established, and a floating buoy and fixed test equipment were designed. A control system, including a sensor connection, data processor, video remote transmission, and corresponding control algorithm, was developed. The control system enabled the nondestructive monitoring of biological attachments and bidirectional, real-time communication between an upper server on land and the control system at the test sites. The dissolved oxygen(DO), temperature, and pH data of DOS600 and DPS600 sensors were compared with those of AP2000 sensors. Temperature recording using the DOS600 sensor was performed nearly as well as that of the AP2000 sensor. The mean DO values(standard deviations) were 8.414 mg L-1(2.068) and 6.896 mg L-1(1.235) for the DOS600 and AP2000 sensors, respectively, indicating that the DOS600 performance was unsatisfactory. The pH recording of the DPS600 was slightly worse than that of the AP2000 sensor. Experimental results showed that the DO value was more easily affected by the buoy movement of waves compared to the pH and temperature. Moreover, data fluctuations showed that the DO and pH parameters were more vulnerable to biofouling than temperature. Waves and biofouling create a harsh test environment, and the performance difference between the developed sensors and a standard sensor can be obtained in a short time period.
基金supported by the Central University Basic Research Professional Expenses Special Foundation of Harbin Engineering University (Grant No. HEUCFL10101109)
文摘For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.
基金National Natural Science Foundation of China (51175502)
文摘Sensor selection and optimization is one of the important parts in design for testability. To address the problems that the traditional sensor optimization selection model does not take the requirements of prognostics and health management especially fault prognostics for testability into account and does not consider the impacts of sensor actual attributes on fault detectability, a novel sensor optimization selection model is proposed. Firstly, a universal architecture for sensor selection and optimization is provided. Secondly, a new testability index named fault predictable rate is defined to describe fault prognostics requirements for testability. Thirdly, a sensor selection and optimization model for prognostics and health management is constructed, which takes sensor cost as objective function and the defined testability indexes as constraint conditions. Due to NP-hard property of the model, a generic algorithm is designed to obtain the optimal solution. At last, a case study is presented to demonstrate the sensor selection approach for a stable tracking servo platform. The application results and comparison analysis show the proposed model and algorithm are effective and feasible. This approach can be used to select sensors for prognostics and health management of any system.
基金supported by the National Research Foundation of Korea(No.2021R1A2B5B03001691).
文摘Point-of-care testing(POCT)is the practice of diagnosing and monitoring diseases where the patient is located,as opposed to traditional treatment conducted solely in a medical laboratory or other clinical setting.POCT has been less common in the recent past due to a lack of portable medical devices capable of facilitating effective medical testing.However,recent growth has occurred in this field due to advances in diagnostic technologies,device miniaturization,and progress in wearable electronics.Among these developments,electrochemical sensors have attracted interest in the POCT field due to their high sensitivity,compact size,and affordability.They are used in various applications,from disease diagnosis to health status monitoring.In this paper we explore recent advancements in electrochemical sensors,the methods of fabricating them,and the various types of sensing mechanisms that can be used.Furthermore,we delve into methods for immobilizing specific biorecognition elements,including enzymes,antibodies,and aptamers,onto electrode surfaces and how these sensors are used in real-world POCT settings.
基金supported by the National Key Research and Development Program of China(2022YFC2601304)National Key Research and Development Program of China(2022YFC2602100)。
文摘Viral diseases represent one of the major threats for salmonids aquaculture.Early detection and identification of viral pathogens is the main prerequisite prior to undertaking effective prevention and control measures.Rapid,sensitive,efficient and portable detection method is highly essential for fish viral diseases detection.Biosensor strategies are highly prevalent and fulfill the expanding demands of on-site detection with fast response,cost-effectiveness,high sensitivity,and selectivity.With the development of material science,the nucleic acid biosensors fabricated by semiconductor have shown great potential in rapid and early detection or screening for diseases at salmonids fisheries.This paper reviews the current detection development of salmonids viral diseases.The present limitations and challenges of salmonids virus diseases surveillance and early detection are presented.Novel nucleic acid semiconductor biosensors are briefly reviewed.The perspective and potential application of biosensors in the on-site detection of salmonids diseases are discussed.
基金supported in part by the Open Fund of Advanced Cryptography and System Security Key Laboratory of Sichuan Province under Grant SKLACSS-202102in part by the Intelligent Terminal Key Laboratory of Sichuan Province under Grant SCITLAB-1019.
文摘The vehicular sensor network (VSN) is an important part of intelligent transportation, which is used for real-timedetection and operation control of vehicles and real-time transmission of data and information. In the environmentofVSN, massive private data generated by vehicles are transmitted in open channels and used by other vehicle users,so it is crucial to maintain high transmission efficiency and high confidentiality of data. To deal with this problem, inthis paper, we propose a heterogeneous fault-tolerant aggregate signcryption scheme with an equality test (HFTASET).The scheme combines fault-tolerant and aggregate signcryption,whichnot onlymakes up for the deficiency oflow security of aggregate signature, but alsomakes up for the deficiency that aggregate signcryption cannot tolerateinvalid signature. The scheme supports one verification pass when all signcryptions are valid, and it supportsunbounded aggregation when the total number of signcryptions grows dynamically. In addition, this schemesupports heterogeneous equality test, and realizes the access control of private data in different cryptographicenvironments, so as to achieve flexibility in the application of our scheme and realize the function of quick searchof plaintext or ciphertext. Then, the security of HFTAS-ET is demonstrated by strict theoretical analysis. Finally, weconduct strict and standardized experimental operation and performance evaluation, which shows that the schemehas better performance.
文摘Outbursts of methane and rocks are, similarly to rock bursts, the biggest hazards in deep mines and are equally difficult to predict. The violent process of the outburst itself, along with the scale and range of hazards following the rapid discharge of gas and rocks, requires solutions which would enable quick and unambiguous detection of the hazard, immediate power supply cut-off and evacuation of personnel from potentially hazardous areas. For this purpose, an integrated outburst detector was developed. Assumed functions of the sensor which was equipped with three measuring and detection elements： a chamber for constant measurement of methane concentration, pressure sensor and microphone. Tests of the sensor model were carried out to estimate the parameters which characterize the dynamic properties of the sensor. Given the impossibility of carrying out the full scale experimental outburst, the sensor was tested during the methane and coal dust explosions in the testing gallery at KD Barbara. The obtained results proved that the applied solutions have been appropriate.
文摘The need for efficient and reproducible development processes for sensor and perception systems is growing with their increased use in modern vehicles. Such processes can be achieved by using virtual test environments and virtual sensor models. In the context of this, the present paper documents the development of a sensor model for depth estimation of virtual three-dimensional scenarios. For this purpose, the geometric and algorithmic principles of stereoscopic camera systems are recreated in a virtual form. The model is implemented as a subroutine in the Epic Games Unreal Engine, which is one of the most common Game Engines. Its architecture consists of several independent procedures that enable a local depth estimation, but also a reconstruction of a whole three-dimensional scenery. In addition, a separate programme for calibrating the model is presented. In addition to the basic principles, the architecture and the implementation, this work also documents the evaluation of the model created. It is shown that the model meets specifically defined requirements for real-time capability and the accuracy of the evaluation. Thus, it is suitable for the virtual testing of common algorithms and highly automated driving functions.
文摘In this paper, we present hands-on experience related to on-going implementation in aircraft of power supply for a wireless sensor network deployed for aerodynamic flight tests. This autonomous battery-free power supply is capturing, managing and storing primary energy from the environment, using solar light and PV （photovoltaic） cells. For practical purposes, it is also equipped with an auxiliary power input. The specifications are detailed, the general architecture is presented and justified, and test results are discussed.
文摘Automotive-grade Complementary Metal-Oxide-Semiconductor(CMOS)sensors play a crucial role in automotive electronic systems,especially in the context of the rapid development of Advanced Driver Assistance Systems(ADAS)and autonomous driving technologies.Their performance is directly related to the safety and reliability of vehicles.However,automobiles will face a variety of complex environmental conditions during the actual operation,such as high temperature,low temperature,vibration,humidity changes,and light changes,which may have an impact on the performance of CMOS sensors.Therefore,it is of great significance to study the performance of automotive-grade CMOS sensors in different environments.
文摘BACKGROUND: Pain and sensory disability are greatly affected by subjective factors, there are no quantitative indexes to evaluate cervical spondylotic radiculopathy(CSR). The judgment on clinical body examination and chief complaint always causes nonobjective results with great individual differences. Quantitative sensory testing (QST) can be used to judge the nerve function of fibril. The application of QST for the quantitative evaluation of peripheral nervous system disease needs to be further studied. OBJECTIVE: The cold-thermal sensation and pain of patients with CSR are quantitatively analyzed by using QST technology in order to evaluate the nerve function of fibril in patients with CSR. DESIGN: Case-control observation. SETTING: Pain Center of Beijing Hospital of Ministry of Health. PARTICIPANTS: Twenty patients with CSR, including 8 males and 12 females, aged from 33 to 70 years, who received treatment between January and April 2005 in Pain Center of Beijing Hospital of Ministry of Health were involved in CSR group. All the involved patients presented symptoms in unilateral upper extremity (left side 10 patients, right side 10 patients). They did not undergo physical therapy or nerve block therapy in 1 week before examination. Eight non-CSR patients who received treatment in Pain Center concurrently were involved in the control group (2 patients with trigeminal neuralgia, 4 with osteoarthrosis of knee joint and 2 with lumbar intervertebral disc protrusion), and another 12 healthy volunteers were involved. Four non-CSR patients and 12 healthy volunteers, 8 male and 12 female, were aged from 23 to 75 years. The informed consents were obtained from all the involved subjects. METHODS: The volar thresholds of cold sensation, thermal sensation, cryalgesia of thenar eminence of both upper extremities of all the subjects were examined separately by limit method with type TSA-Ⅱ temperature sensation analysator made by Medco Company (Israel). The subjects were pre-examined to be familiar with the method for sensory discrimination and affirmation. Thenar eminence vola of bilateral upper extremities were detected. The infrared detector of a semiconductor was contacted with skin. The infrared detector could be used to heat and cool skin. A group of cold-heat water circulation device was given electric current to produce temperature gradient, which was higher or lower than skin temperature. The initial temperature of infrared detector was 32 ℃, stimulation temperature was increased or decreased progressively at 1 ℃/s, and temperature change range was 0 to 50 ℃. In the first step, subjects pressed down the button to stop the stimulation when the temperature of infrared detector was decreased progressively until the subjects felt, and the threshold of cold sensation was obtained; In the second step, the threshold of thermal sensation was obtained when the temperature of infrared detector was increased progressively until the subjects felt; In the third step, the threshold of cryalgesia was obtained when the temperature of infrared detector was decreased progressively until subjects felt; and in the fourth step, the threshold of thermalgesia was obtained when the temperature of infrared detector was increased progressively until subjects felt. Each step was conducted 4 times and the mean threshold was obtained. Before each measurement, the temperature was made to rebound to the initial temperature and kept for 10 s. MAIN OUTCOME MEASURES: The thresholds of cold sensation, thermal sensation and cryalgesia, thermalgesia of thenar eminence vola of bilateral upper extremities of all the subjects. RESULTS: Twenty patients with CSR and 20 healthy subjects participated in the final results. ① In the CSR group, the threshold of cold sensation of affected side was lower than that of intact side [(29.00±1.26) ℃ vs.(30.00±1.06) ℃, P < 0.05], and the threshold of thermal sensation of affected side was higher than that of intact side [(35.04±0.87) ℃ vs. (34.14±0.99) ℃, P < 0.05]. There were no significant differences in the thresholds of cold and thermal sensation between affected side and intact side (P > 0.05). ②In the CSR group, the difference of threshold of cold sensation, thermal sensation, cryalgesia and thermalgesia between affected side and intact side was (-1.01±0.57), (0.89±0.39), (2.49±1.10) and (-1.62±0.86) ℃, respectively , the absolute value of which was higher than that of control group, respectively [(0.04±0.28),(0.05±0.26),(0.28±1.79),(0.17±1.10) ℃,P < 0.01]. In the CSR group, the threshold of cold sensation and thermalgesia of affected side was lower than that of intact side, respectively; and the threshold of thermal sensation and cryalgesia of affected side was higher than that of intact side, respectively. CONCLUSION: The superficial sensation of affected extremity of patients with CSR is lessened as compared with that of intact extremity. There are dysfunctions of small myelinated fiber (Aδ fiber) and demyelinated fiber (C fiber) in the affected-side extremity. QST, as a mean for quantitatively evaluating the function of Aδ fiber and C fiber, plays an objective evaluative role in the diagnosis and therapeutic effect observation of CSR.
基金supported by the National Key Research and Development Program of China(2023YFB3809800)the National Natural Science Foundation of China(52172249,52525601)+2 种基金the Chinese Academy of Sciences Talents Program(E2290701)the Jiangsu Province Talents Program(JSSCRC2023545)the Special Fund Project of Carbon Peaking Carbon Neutrality Science and Technology Innovation of Jiangsu Province(BE2022011).
文摘Flexible fiber sensors,However,traditional methods face challenges in fabricating low-cost,large-scale fiber sensors.In recent years,the thermal drawing process has rapidly advanced,offering a novel approach to flexible fiber sensors.Through the preform-tofiber manufacturing technique,a variety of fiber sensors with complex functionalities spanning from the nanoscale to kilometer scale can be automated in a short time.Examples include temperature,acoustic,mechanical,chemical,biological,optoelectronic,and multifunctional sensors,which operate on diverse sensing principles such as resistance,capacitance,piezoelectricity,triboelectricity,photoelectricity,and thermoelectricity.This review outlines the principles of the thermal drawing process and provides a detailed overview of the latest advancements in various thermally drawn fiber sensors.Finally,the future developments of thermally drawn fiber sensors are discussed.
基金Supported by National Hi-tech Research and Development Program of China(863 Program,Grant No.2011AA110503-3)Fundamental Research Funds for the Central Universities of China(Grant No.2860219030)Foundation of Traction Power State Key Laboratory of Southwest Jiaotong University,China(Grant No.TPL1308)
文摘Fault diagnosis of various systems on rolling stock has drawn the attention of many researchers. However, obtaining an optimized sensor set of these systems, which is a prerequisite for fault diagnosis, remains a major challenge. Available literature suggests that the configuration of sensors in these systems is presently dependent on the knowledge and engineering experiences of designers, which may lead to insufficient or redundant development of various sensors. In this paper, the optimization of sensor sets is addressed by using the signed digraph （SDG） method. The method is modified for use in braking systems by the introduction of an effect-function method to replace the traditional quantitative methods. Two criteria are adopted to evaluate the capability of the sensor sets, namely, observability and resolution. The sensors configuration method of braking system is proposed. It consists of generating bipartite graphs from SDG models and then solving the set cover problem using a greedy algorithm. To demonstrate the improvement, the sensor configuration of the HP2008 braking system is investigated and fault diagnosis on a test bench is performed. The test results show that SDG algorithm can improve single-fault resolution from 6 faults to 10 faults, and with additional four brake cylinder pressure （BCP） sensors it can cover up to 67 double faults which were not considered by traditional fault diagnosis system. SDG methods are suitable for reducing redundant sensors and that the sensor sets thereby obtained are capable of detecting typical faults, such as the failure of a release valve. This study investigates the formal extension of the SDG method to the sensor configuration of braking system, as well as the adaptation supported by the effect-function method.
文摘In view of the influence and harm of low frequency vibration environment on the structure of spaceflight products,a low frequency dynamic study method for piezoelectric sensor based on the dynamic system of sinusoidal pressure is proposed.This method uses a sinusoidal pressure dynamic system with two-way dual channel import and export synchronization technology to study the low frequency characteristics of a piezoelectric sensor of PCB company,and its lower cut-off frequency is 0.26 Hz.It is also studied that when the frequency of the measured vibration or shock signal is 1-200 kHz,the error range of signal positive pressure action time is 4.87%-0.03%.The dynamic compensation for the low frequency of the vibration sensor is carried out,and the compensation effect is good.
文摘In this paper, an optical fiber sensor is designed by using optical Faraday effect. It is composed of fiber collimator, polarizer, magneto-optical crystal and mirror. Based on the magnetic flux leakage (MFL) theory, The optical fiber sensor was placed between two permanent magnets with the N-pole. Therefore, the optical fiber sensing system was built to detect the defective ferromagnetic objects. Theoretical and experimental studies shown that the system can identify a little defects, such as irons’ blind hole (diameter φ =?3mm , depth t = 4mm?), irons’ grooves (length l= 30mm , width?ω = 10mm ), hole (φ?=?3mm ) and crackle etc. The system has the characteristics of small size, high sensitivity, fast signal response and high resolution. In terms of the defective oil and gas pipelines detection, The optical fiber sensing system is used in non-destructive testing, which will be valuable and meaningful.
