Pores,microcracks and density of plasma sprayed Cr2O3 coatings before and after high-intensity pulsed ion beam(HIPIB) irradiation were investigated using the ultrasonic reflection coefficient spectroscopy(URCS).The UR...Pores,microcracks and density of plasma sprayed Cr2O3 coatings before and after high-intensity pulsed ion beam(HIPIB) irradiation were investigated using the ultrasonic reflection coefficient spectroscopy(URCS).The URCS was analyzed based on an acoustic transmission model for the multi-layered structure.The longitudinal velocity in the coatings was calculated from the experimental URCS,and the attenuation coefficient expression was deduced by comparing the experimental and numerical fitting amplitude spectral lines.The longitudinal velocity of as-sprayed Cr2O3 coating is 2 002 m/s,and increases to 2 099 and 2 148 m/s after being irradiated by HIPIB with 1 and 5 shots.Correspondingly,the factor A changes from 0.046 to 0.026 and 0.020 and n from 1.702 to 1.658 and 1.649 in the attenuation coefficient expression of α=Af n.It is observed that the surface morphology of Cr2O3 coatings changes from rough and porous to smooth and uniform with the increase of shot number,which accords with the ultrasonic analyses reasonably.The URCS seems to provide a convenient and nondestructive method to characterize surface modification of the plasma sprayed coatings.展开更多
Thin alloy films of palladium(Pd) and silver(Ag) are deposited onto glass substrates via the direct current(DC) magnetron technique.The hydrogen sensor probe consists of optical fiber bundle and Pd/Ag optical thin fil...Thin alloy films of palladium(Pd) and silver(Ag) are deposited onto glass substrates via the direct current(DC) magnetron technique.The hydrogen sensor probe consists of optical fiber bundle and Pd/Ag optical thin film.when the sensor is exposed to hydrogen,the refractive index of Pd/Ag optical thin layer will diminish and cause attenuation changes of the reflective light.It is observed that the thickness of Pd/Ag alloy layer can affect the hydrogen sensor signal.Under different substrate temperatures,several Pd/Ag samples are coated with different thicknesses of Pd/Ag alloy,and the results of a hydrogen sensor based on reflective light from the Pd/Ag alloy thin film are discussed.展开更多
It is always a challenging issue for radar systems to estimate the height of a low-angle target in the multipath propagation environment.The highly deterministic maximum likelihood estimator has a high accuracy,but th...It is always a challenging issue for radar systems to estimate the height of a low-angle target in the multipath propagation environment.The highly deterministic maximum likelihood estimator has a high accuracy,but the errors of the ground reflection coefficient and the reflecting surface height have serious influence on the method.In this paper,a robust es-timation method with less computation burden is proposed based on the compound reflection coefficient multipath model for low-angle targets.The compound reflection coefficient is es-timated from the received data of the array and then a one-di-mension generalized steering vector is constructed to estimate the target height.The algorithm is robust to the reflecting sur-face height error and the ground reflection coefficient error.Fi-nally,the experiment and simulation results demonstrate the validity of the proposed method.展开更多
A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device ...A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device can compensate the phase difference between p and s components of the incident light caused by total internal reflections in a glass. The self-correction, auto-correlation and auto-amplification techniques are used in the signal treatment with the help of a computer.展开更多
A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）i...A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）is proved to be good linear,high precision and less that can fetch precise data in low pressure range even near by O point,which guarantees the reliability of the soil pressure test in geotechnical engineering.展开更多
In this paper,we investigate IRS-aided user cooperation(UC)scheme in millimeter wave(mmWave)wirelesspowered sensor networks(WPSN),where two single-antenna users are wireless powered in the wireless energy transfer(WET...In this paper,we investigate IRS-aided user cooperation(UC)scheme in millimeter wave(mmWave)wirelesspowered sensor networks(WPSN),where two single-antenna users are wireless powered in the wireless energy transfer(WET)phase first and then cooperatively transmit information to a hybrid access point(AP)in the wireless information transmission(WIT)phase,following which the IRS is deployed to enhance the system performance of theWET andWIT.We maximized the weighted sum-rate problem by jointly optimizing the transmit time slots,power allocations,and the phase shifts of the IRS.Due to the non-convexity of the original problem,a semidefinite programming relaxation-based approach is proposed to convert the formulated problem to a convex optimization framework,which can obtain the optimal global solution.Simulation results demonstrate that the weighted sum throughput of the proposed UC scheme outperforms the non-UC scheme whether equipped with IRS or not.展开更多
Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesi...Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesis of those linearized approximate equations leads to big errors when the two media across the interface vary dramatically.To extend the application of AVO analysis and inversion to high contrast between the properties of the two layers,we derive a novel nonlinearized high-contrast approximation of the PP-wave reflection coefficient,which establishes the direct relationship between PPwave reflection coefficient and P-wave velocities,S-wave velocities and densities across the interface.（A PP wave is a reflected compressional wave from an incident compressional wave（P-wave）.） This novel approximation is derived from the exact reflection coefficient equation with Taylor expansion for the incident angle.Model tests demonstrate that,compared with the reflection coefficients of the linearized approximations,the reflection coefficients of the novel nonlinearized approximate equation agree with those of the exact PP equation better for a high contrast interface with a moderate incident angle.Furthermore,we introduce a nonlinear direct inversion method utilizing the novel reflection coefficient equation as forward solver,to implement the direct inversion for the six parameters including P-wave velocities,S-wave velocities,and densities in the upper and lower layers across the interface.This nonlinear inversion algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way.Three examples verified the feasibility and suitability of this novel approximation for a high contrast interface,and we still could estimate the six parameters across the interface reasonably when the parameters in both media across the interface vary about 50%.展开更多
The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of t...The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.展开更多
Although the Zoeppritz equation is suitable for a single interface in a thick deposit, it has some limitations for composite reflection waves from both the floor and the roof of coal seams. Based on the ray model, the...Although the Zoeppritz equation is suitable for a single interface in a thick deposit, it has some limitations for composite reflection waves from both the floor and the roof of coal seams. Based on the ray model, the relationship of the overall reflection coefficient of composite reflection P waves, from coal seam versus incidence angle (AVO), is dis- cussed. The result shows that: 1) the overall reflection coefficient of composite reflection waves from coal seams is a negative value and is determined mainly by the lithology of roof and floor, which is different from the reflection coeffi- cient of a single interface; 2) if the incidence angle ranges from 0° to 6°, the reflection coefficient of composite waves of a coal seam does not change with the incidence angle and 3) if the incidence angle ranges from 6–60° , the reflection coefficient increases monotonically.展开更多
The hollow-pipe perforated breakwater is of low reflection. In this paper the functions of reflection coefficients of both regular and random waves are theoretically derived, based on the concept of linear superimposi...The hollow-pipe perforated breakwater is of low reflection. In this paper the functions of reflection coefficients of both regular and random waves are theoretically derived, based on the concept of linear superimposition of reflected and incident waves and with the total flow rate continuity of integral form instead of the non-continuity of the boundary condition, and based on the concept of linear wave spectrum theory. Comparisons between theoretical results presented here and measurements of model tests show reasonable agreement.展开更多
A novel method for precise measurement of complex reflection coeffcient using a four-port reflectometer is presented. First, three new complex system constants are introduced,which depend only on the scattering parame...A novel method for precise measurement of complex reflection coeffcient using a four-port reflectometer is presented. First, three new complex system constants are introduced,which depend only on the scattering parameters of the four-port reflectometer. Therefore, the stability of the reflectometer is greatly improved. Then, these complex system constants are used to determine the complex reflection coeffcient F of the device under test by calibrating the reflectometer. Finally, a four-port reflectometer comprising a magic tee and a power detector is constructed and excellent experimental results are obtained.展开更多
A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient （Cr）. The curvature of a perforated plate can be changed by rotating...A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient （Cr）. The curvature of a perforated plate can be changed by rotating a reference perforated plate about its origin point according to the parabolic equation y=-x2 A plunger-type wave maker is used to generate regular waves. The reflection coefficients are calculated using Goda and Suzuki’s （1976） method. The results are compared with those of vertical or sloped passive wave absorbers. The comparison shows that a perforated plate with a curved profile is highly efficient in terms of reducing the wave reflection coefficient. A correlation is established to estimate the reflection coefficient of curved perforated plates as a function of both flow and geometry characteristics.展开更多
The wave reflection coefficient frequency spectrum and directional spectrum for concrete face slope breakwaters and rubble mound breakwaters are investigated through physical model tests in the present study. The refl...The wave reflection coefficient frequency spectrum and directional spectrum for concrete face slope breakwaters and rubble mound breakwaters are investigated through physical model tests in the present study. The reflection coefficients of oblique irregular waves are analyzed by the Modified Two-Point Method (MTPM) proposed by the authors. The results show that the wave reflection coefficient decreases with increasing wave frequency and incident angle or decreasing structure slope. The reflection coefficient frequency spectrum and its variation with Iribarren number are given in this paper. The paper also suggests an empirical 3-dimensional reflection coefficient spectrum, i.e. reflection coefficient directional spectrum, which can be used to illustrate quantitatively the variation of reflection coefficient with the incident angle and the Iribarren number for oblique irregular waves.展开更多
In this paper, the modified Bayesian method for the analysis of directional wave spectra and reflection coefficients is verified by numerical and physical simulation of waves. The results show that the method can basi...In this paper, the modified Bayesian method for the analysis of directional wave spectra and reflection coefficients is verified by numerical and physical simulation of waves. The results show that the method can basically separate the incident and reflected directional spectra. In addition, the effect of the type of wave gage arrays, the number of measured wave properties, and the distance between the wave gage array and the reflection line on the resolution of the method are investigated. Some suggestions are proposed for practical application.展开更多
The sand layer B of Dongying Formation of CFD oilfield in Bohai offshore belongs to the middle deep layer of buried hill overlap deposit. Its reservoir distribution has the characteristics of large burial depth, thin ...The sand layer B of Dongying Formation of CFD oilfield in Bohai offshore belongs to the middle deep layer of buried hill overlap deposit. Its reservoir distribution has the characteristics of large burial depth, thin thickness and rapidly lateral change. Because of low resolution of seismic data and overlying sand layer. It is difficult to identify and interpret the structure of sand layer accurately. The uncertainty of structure and reservoir restricts the fine development of B sand layer. In order to identify the top surface of reservoir effectively. The seismic data are processed by using the reflection coefficient inversion method. The results show that the inversion resolution of reflection coefficient is significantly higher than that of original data. The top surface of sand layer B and its overlying sand layer can be well identified and traced. Carrying out structural interpretation of B sand layer based on reflection coefficient inversion data and the microstructure and the formation tip extinction point are implemented. Based on the constraint of new interpretation level, the sedimentary facies plane distribution of B sand layer is described and make prediction of dominant reservoir development area in detail combining with sedimentary paleogeomorphology, along layer attribute section and limited drilling data. The research shows that the study area is mainly from the northwest material sources, the slope belt in the northwest is close to the lake shoreline with a gentle slope and shallow water depositional environment, which is located on the main transport and deposition channels. The shallow water gentle slope landform is suitable for forming large-area sand bar deposition, mainly composed of underwater distributary channel and debouch bars facies, which is the dominant reservoir development area. The research conclusion guides the deployment and implementation of the development well location effectively.展开更多
This paper presents a methodological approach to design a printed Inverted F antenna for the ISM 868 MHz band. For this design, the ground plane dimensions were kept fixed and the meandered radiating arm was modified ...This paper presents a methodological approach to design a printed Inverted F antenna for the ISM 868 MHz band. For this design, the ground plane dimensions were kept fixed and the meandered radiating arm was modified to obtain the best compromise integration/performances. This approach was then generalized to design meandered printed inverted F antennas.展开更多
From an ordinary condition,using a full three-dimensional model theory and an infinite perturbation expansion method,an exact solution of the reflection coefficient for the coated narrow stripe-geometry optical wavegu...From an ordinary condition,using a full three-dimensional model theory and an infinite perturbation expansion method,an exact solution of the reflection coefficient for the coated narrow stripe-geometry optical waveguide devices has been derived.All six components and the vector property of the electromagnetic field have been considered.The results are suitable for the symmetric and asymmetric waveguides.展开更多
The impregnated radar absorbing material(RAM) honeycomb is often used to fabricate parts of the war plane for reducing radar cross section. The incident wave vector may be divided into two components: one perpendicula...The impregnated radar absorbing material(RAM) honeycomb is often used to fabricate parts of the war plane for reducing radar cross section. The incident wave vector may be divided into two components: one perpendicular to its hole and the other to its side wall. Until now, there has not been a program to calculate the input impedance or its equivalent electromagnetic parameters for the later case. In this paper, an approach for analyzing the reflection characteristics of the impregnated honeycomb when its side wall faces the incident plane wave is proposed. Experiments prove it an effective, accurate and fast solution to this subject.展开更多
In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperatu...In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperature sensitivities of the FBG sensors are studied both theoretically and experimentally with good agreement, which provides a means for selection of FBG packaging material to achieve desired temperature sensitivity. We also demonstrate a 4-point bending structured FBG lateral force sensor that measures up to 242N force with well-preserved reflection spectrum, whereas for 3-point bending structure, multiple-peaks start to occur when applied force reaches 72N.展开更多
基金Project(KM200710015010) supported by the Scientific Research Program of Beijing Municipal Education Commission,China
文摘Pores,microcracks and density of plasma sprayed Cr2O3 coatings before and after high-intensity pulsed ion beam(HIPIB) irradiation were investigated using the ultrasonic reflection coefficient spectroscopy(URCS).The URCS was analyzed based on an acoustic transmission model for the multi-layered structure.The longitudinal velocity in the coatings was calculated from the experimental URCS,and the attenuation coefficient expression was deduced by comparing the experimental and numerical fitting amplitude spectral lines.The longitudinal velocity of as-sprayed Cr2O3 coating is 2 002 m/s,and increases to 2 099 and 2 148 m/s after being irradiated by HIPIB with 1 and 5 shots.Correspondingly,the factor A changes from 0.046 to 0.026 and 0.020 and n from 1.702 to 1.658 and 1.649 in the attenuation coefficient expression of α=Af n.It is observed that the surface morphology of Cr2O3 coatings changes from rough and porous to smooth and uniform with the increase of shot number,which accords with the ultrasonic analyses reasonably.The URCS seems to provide a convenient and nondestructive method to characterize surface modification of the plasma sprayed coatings.
基金supported by the National Natural Science Foundation of China (No.50974062)the National Science and Technology Major Projects of China (No.2009ZX04002-043-05)+1 种基金the Scientific Research Program of Department of Education of Henan Province of China (No.2008B520044)the Basic and Frontier Technology Research Program of Henan Province of China (No.082300410320)
文摘Thin alloy films of palladium(Pd) and silver(Ag) are deposited onto glass substrates via the direct current(DC) magnetron technique.The hydrogen sensor probe consists of optical fiber bundle and Pd/Ag optical thin film.when the sensor is exposed to hydrogen,the refractive index of Pd/Ag optical thin layer will diminish and cause attenuation changes of the reflective light.It is observed that the thickness of Pd/Ag alloy layer can affect the hydrogen sensor signal.Under different substrate temperatures,several Pd/Ag samples are coated with different thicknesses of Pd/Ag alloy,and the results of a hydrogen sensor based on reflective light from the Pd/Ag alloy thin film are discussed.
基金supported by the National Natural Science Foundation of China(61771367)the Science and Technology on Communication Networks Laboratory(6142104190204).
文摘It is always a challenging issue for radar systems to estimate the height of a low-angle target in the multipath propagation environment.The highly deterministic maximum likelihood estimator has a high accuracy,but the errors of the ground reflection coefficient and the reflecting surface height have serious influence on the method.In this paper,a robust es-timation method with less computation burden is proposed based on the compound reflection coefficient multipath model for low-angle targets.The compound reflection coefficient is es-timated from the received data of the array and then a one-di-mension generalized steering vector is constructed to estimate the target height.The algorithm is robust to the reflecting sur-face height error and the ground reflection coefficient error.Fi-nally,the experiment and simulation results demonstrate the validity of the proposed method.
文摘A novel optical device of a bulk glass Faraday current sensor is presented,which has a accuracy of 0. 5 in the current region of 1 000- 8 000 A and over a temperature range from-30℃ to + 40℃. The new sensing device can compensate the phase difference between p and s components of the incident light caused by total internal reflections in a glass. The self-correction, auto-correlation and auto-amplification techniques are used in the signal treatment with the help of a computer.
文摘A calibration test was done in order to measure its sensitivity coefficient by an improved soil test device.The experimental result shows that the soil pressure min-sensor made of the monocrystalline silicon（SPMMS）is proved to be good linear,high precision and less that can fetch precise data in low pressure range even near by O point,which guarantees the reliability of the soil pressure test in geotechnical engineering.
基金This work was supported in part by the open research fund of National Mobile Communications Research Laboratory,Southeast University(No.2023D11)in part by Sponsored by program for Science&Technology Innovation Talents in Universities of Henan Province(23HASTIT019)+2 种基金in part by Natural Science Foundation of Henan Province(20232300421097)in part by the project funded by China Postdoctoral Science Foundation(2020M682345)in part by the Henan Postdoctoral Foundation(202001015).
文摘In this paper,we investigate IRS-aided user cooperation(UC)scheme in millimeter wave(mmWave)wirelesspowered sensor networks(WPSN),where two single-antenna users are wireless powered in the wireless energy transfer(WET)phase first and then cooperatively transmit information to a hybrid access point(AP)in the wireless information transmission(WIT)phase,following which the IRS is deployed to enhance the system performance of theWET andWIT.We maximized the weighted sum-rate problem by jointly optimizing the transmit time slots,power allocations,and the phase shifts of the IRS.Due to the non-convexity of the original problem,a semidefinite programming relaxation-based approach is proposed to convert the formulated problem to a convex optimization framework,which can obtain the optimal global solution.Simulation results demonstrate that the weighted sum throughput of the proposed UC scheme outperforms the non-UC scheme whether equipped with IRS or not.
基金the sponsorship of the National 973 Program of China (2013CB228604)the National Grand Project for Science and Technology (2011ZX05030-004-002, 2011ZX05019-003 and 2011ZX05006-002) for funding this research+2 种基金the support of the Australian and Western Australian Governments and the North West Shelf Joint Venture Partnersthe Western Australian Energy Research Alliance (WA:ERA)Foundation from Geophysical Key Lab of SINOPEC (WTYJYWX2013-04-01)
文摘Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesis of those linearized approximate equations leads to big errors when the two media across the interface vary dramatically.To extend the application of AVO analysis and inversion to high contrast between the properties of the two layers,we derive a novel nonlinearized high-contrast approximation of the PP-wave reflection coefficient,which establishes the direct relationship between PPwave reflection coefficient and P-wave velocities,S-wave velocities and densities across the interface.（A PP wave is a reflected compressional wave from an incident compressional wave（P-wave）.） This novel approximation is derived from the exact reflection coefficient equation with Taylor expansion for the incident angle.Model tests demonstrate that,compared with the reflection coefficients of the linearized approximations,the reflection coefficients of the novel nonlinearized approximate equation agree with those of the exact PP equation better for a high contrast interface with a moderate incident angle.Furthermore,we introduce a nonlinear direct inversion method utilizing the novel reflection coefficient equation as forward solver,to implement the direct inversion for the six parameters including P-wave velocities,S-wave velocities,and densities in the upper and lower layers across the interface.This nonlinear inversion algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way.Three examples verified the feasibility and suitability of this novel approximation for a high contrast interface,and we still could estimate the six parameters across the interface reasonably when the parameters in both media across the interface vary about 50%.
基金The present work was financially supported by the Joint Fund of the National Natural Science Foundation of China the Hong Kong Science Research Bureau under contract No.49910161985 the Research Fund for the Development of Harbor Engineering Desig
文摘The reflection coefficient and the total horizontal forces of regular waves acting on theperforated caisson are experimentally investigated. The empirical relationship between reflection coefficient and the ratio of the total horizontal forces acting on the perforated caisson to those on solid vertical walls with the relative chamber width, relative water depth and porosity of perforated wall, etc. are given. Moreover, the results of the ratio of the total horizontal forces are also compared with formulas given by Chinese Harbour Design Criteria and Takahashi, which may be useful for the practical engineering application.
基金Project 40574058 Supported by the National Natural Science Foundation of China
文摘Although the Zoeppritz equation is suitable for a single interface in a thick deposit, it has some limitations for composite reflection waves from both the floor and the roof of coal seams. Based on the ray model, the relationship of the overall reflection coefficient of composite reflection P waves, from coal seam versus incidence angle (AVO), is dis- cussed. The result shows that: 1) the overall reflection coefficient of composite reflection waves from coal seams is a negative value and is determined mainly by the lithology of roof and floor, which is different from the reflection coeffi- cient of a single interface; 2) if the incidence angle ranges from 0° to 6°, the reflection coefficient of composite waves of a coal seam does not change with the incidence angle and 3) if the incidence angle ranges from 6–60° , the reflection coefficient increases monotonically.
文摘The hollow-pipe perforated breakwater is of low reflection. In this paper the functions of reflection coefficients of both regular and random waves are theoretically derived, based on the concept of linear superimposition of reflected and incident waves and with the total flow rate continuity of integral form instead of the non-continuity of the boundary condition, and based on the concept of linear wave spectrum theory. Comparisons between theoretical results presented here and measurements of model tests show reasonable agreement.
文摘A novel method for precise measurement of complex reflection coeffcient using a four-port reflectometer is presented. First, three new complex system constants are introduced,which depend only on the scattering parameters of the four-port reflectometer. Therefore, the stability of the reflectometer is greatly improved. Then, these complex system constants are used to determine the complex reflection coeffcient F of the device under test by calibrating the reflectometer. Finally, a four-port reflectometer comprising a magic tee and a power detector is constructed and excellent experimental results are obtained.
文摘A set of experiments is carried out in a towing tank to study the effects of the curvature of perforated plates on the wave reflection coefficient （Cr）. The curvature of a perforated plate can be changed by rotating a reference perforated plate about its origin point according to the parabolic equation y=-x2 A plunger-type wave maker is used to generate regular waves. The reflection coefficients are calculated using Goda and Suzuki’s （1976） method. The results are compared with those of vertical or sloped passive wave absorbers. The comparison shows that a perforated plate with a curved profile is highly efficient in terms of reducing the wave reflection coefficient. A correlation is established to estimate the reflection coefficient of curved perforated plates as a function of both flow and geometry characteristics.
文摘The wave reflection coefficient frequency spectrum and directional spectrum for concrete face slope breakwaters and rubble mound breakwaters are investigated through physical model tests in the present study. The reflection coefficients of oblique irregular waves are analyzed by the Modified Two-Point Method (MTPM) proposed by the authors. The results show that the wave reflection coefficient decreases with increasing wave frequency and incident angle or decreasing structure slope. The reflection coefficient frequency spectrum and its variation with Iribarren number are given in this paper. The paper also suggests an empirical 3-dimensional reflection coefficient spectrum, i.e. reflection coefficient directional spectrum, which can be used to illustrate quantitatively the variation of reflection coefficient with the incident angle and the Iribarren number for oblique irregular waves.
基金The work reported in this paper is financially supported by both the National Natural Science Foundation of China (No.59909001) the Research Fund for the Doctoral Program of Ministry of Education of China (No.98014118)
文摘In this paper, the modified Bayesian method for the analysis of directional wave spectra and reflection coefficients is verified by numerical and physical simulation of waves. The results show that the method can basically separate the incident and reflected directional spectra. In addition, the effect of the type of wave gage arrays, the number of measured wave properties, and the distance between the wave gage array and the reflection line on the resolution of the method are investigated. Some suggestions are proposed for practical application.
文摘The sand layer B of Dongying Formation of CFD oilfield in Bohai offshore belongs to the middle deep layer of buried hill overlap deposit. Its reservoir distribution has the characteristics of large burial depth, thin thickness and rapidly lateral change. Because of low resolution of seismic data and overlying sand layer. It is difficult to identify and interpret the structure of sand layer accurately. The uncertainty of structure and reservoir restricts the fine development of B sand layer. In order to identify the top surface of reservoir effectively. The seismic data are processed by using the reflection coefficient inversion method. The results show that the inversion resolution of reflection coefficient is significantly higher than that of original data. The top surface of sand layer B and its overlying sand layer can be well identified and traced. Carrying out structural interpretation of B sand layer based on reflection coefficient inversion data and the microstructure and the formation tip extinction point are implemented. Based on the constraint of new interpretation level, the sedimentary facies plane distribution of B sand layer is described and make prediction of dominant reservoir development area in detail combining with sedimentary paleogeomorphology, along layer attribute section and limited drilling data. The research shows that the study area is mainly from the northwest material sources, the slope belt in the northwest is close to the lake shoreline with a gentle slope and shallow water depositional environment, which is located on the main transport and deposition channels. The shallow water gentle slope landform is suitable for forming large-area sand bar deposition, mainly composed of underwater distributary channel and debouch bars facies, which is the dominant reservoir development area. The research conclusion guides the deployment and implementation of the development well location effectively.
文摘This paper presents a methodological approach to design a printed Inverted F antenna for the ISM 868 MHz band. For this design, the ground plane dimensions were kept fixed and the meandered radiating arm was modified to obtain the best compromise integration/performances. This approach was then generalized to design meandered printed inverted F antennas.
文摘From an ordinary condition,using a full three-dimensional model theory and an infinite perturbation expansion method,an exact solution of the reflection coefficient for the coated narrow stripe-geometry optical waveguide devices has been derived.All six components and the vector property of the electromagnetic field have been considered.The results are suitable for the symmetric and asymmetric waveguides.
文摘The impregnated radar absorbing material(RAM) honeycomb is often used to fabricate parts of the war plane for reducing radar cross section. The incident wave vector may be divided into two components: one perpendicular to its hole and the other to its side wall. Until now, there has not been a program to calculate the input impedance or its equivalent electromagnetic parameters for the later case. In this paper, an approach for analyzing the reflection characteristics of the impregnated honeycomb when its side wall faces the incident plane wave is proposed. Experiments prove it an effective, accurate and fast solution to this subject.
基金Supported by Science & Engineering Research Council of Singapore (052 118 0052)
文摘In this paper, the effects of packaging material and structure of fiber Bragg grating sensor performance are investigated. The effects of thermal expansion coefficient of different embedding materials on the temperature sensitivities of the FBG sensors are studied both theoretically and experimentally with good agreement, which provides a means for selection of FBG packaging material to achieve desired temperature sensitivity. We also demonstrate a 4-point bending structured FBG lateral force sensor that measures up to 242N force with well-preserved reflection spectrum, whereas for 3-point bending structure, multiple-peaks start to occur when applied force reaches 72N.
