Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000...Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.展开更多
The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential sc...The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
Ischemia–reperfusion injury is a common pathophysiological mechanism in retinal degeneration.PANoptosis is a newly defined integral form of regulated cell death that combines the key features of pyroptosis,apoptosis,...Ischemia–reperfusion injury is a common pathophysiological mechanism in retinal degeneration.PANoptosis is a newly defined integral form of regulated cell death that combines the key features of pyroptosis,apoptosis,and necroptosis.Oligomerization of mitochondrial voltage-dependent anion channel 1 is an important pathological event in regulating cell death in retinal ischemia–reperfusion injury.However,its role in PANoptosis remains largely unknown.In this study,we demonstrated that voltage-dependent anion channel 1 oligomerization-mediated mitochondrial dysfunction was associated with PANoptosis in retinal ischemia–reperfusion injury.Inhibition of voltage-dependent anion channel 1 oligomerization suppressed mitochondrial dysfunction and PANoptosis in retinal cells subjected to ischemia–reperfusion injury.Mechanistically,mitochondria-derived reactive oxygen species played a central role in the voltagedependent anion channel 1-mediated regulation of PANoptosis by promoting PANoptosome assembly.Moreover,inhibiting voltage-dependent anion channel 1 oligomerization protected against PANoptosis in the retinas of rats subjected to ischemia–reperfusion injury.Overall,our findings reveal the critical role of voltage-dependent anion channel 1 oligomerization in regulating PANoptosis in retinal ischemia–reperfusion injury,highlighting voltage-dependent anion channel 1 as a promising therapeutic target.展开更多
Numerous pathological states of the nervous system involve alterations in neuronal excitability and synaptic dysfunction,which depend on the function of ion channels.Due to their critical involvement in health and dis...Numerous pathological states of the nervous system involve alterations in neuronal excitability and synaptic dysfunction,which depend on the function of ion channels.Due to their critical involvement in health and disease,the search for new compounds that modulate these proteins is still relevant.Traditional medicine has long been a rich source of neuroactive compounds.For example,the indigenous Mapuche people have used the leaves and bark of the Drimys winteri tree for centuries to treat various diseases.Consequently,several studies have investigated the biological effects of compounds in Drimys winteri,highlighting sesquiterpenes such asα-humulene,drimenin,polygodial,andα-,β-,γ-eudesmol.However,there is currently no literature review focusing on the ability of these sesquiterpenes to modulate ion channels.This review summarizes the current knowledge about neuroactive compounds found in Drimys winteri,with special emphasis on their direct actions on neuronal ion channels.Several Drimys winteri sesquiterpenes modulate a diverse array of neuronal ion channels,including transient receptor potential channels,gamma-aminobutyric acid A receptors,nicotinic acetylcholine receptors,and voltage-dependent Ca^(2+)and Na^(+)channels.Interestingly,the modulation of these molecular targets by Drimys winteri sesquiterpenes correlates with their therapeutic actions.The promiscuous pharmacological profile of Drimys winteri sesquiterpenes suggests they modulate multiple protein targets in vivo,making them potentially useful for treating complex,multifactorial diseases.Further studies at the molecular level may aid in developing multitargeted drugs with enhanced therapeutic effects.展开更多
The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and...The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and makes full use of the sparse characteristics of DD domain,it has been widely studied to design efficient channel estimation and signal detection schemes.In this paper,we design a novel superimposed pilot pattern with transition band,which replaces the traditional embedded pilot(EP)guard zero-symbols,and perform a two-stage channel estimation.In the first stage,we fully utilize the dispersion characteristics of OTFS signal in DD domain,and use threshold decision to make coarse channel estimation.In the second stage,we use the results of the coarse estimation for iterative signal detection and accurate channel estimation.During the second stage,we make full use of the sparsity of the channel in DD domain,remodel the received signal into the form of sparse channel vector multiplied by channel coefficient matrix,and introduce Doppler index segmentation factor(DISF)to subdivide the Doppler index to solve the problem of fractional Doppler.Simulations reveal that,the scheme proposed in this paper has higher spectral efficiency compared with traditional EP scheme and lower peak-to-average power ratio(PAPR)compared with traditional superimposed pilot scheme.展开更多
With the growing advancement of wireless communication technologies,WiFi-based human sensing has gained increasing attention as a non-intrusive and device-free solution.Among the available signal types,Channel State I...With the growing advancement of wireless communication technologies,WiFi-based human sensing has gained increasing attention as a non-intrusive and device-free solution.Among the available signal types,Channel State Information(CSI)offers fine-grained temporal,frequency,and spatial insights into multipath propagation,making it a crucial data source for human-centric sensing.Recently,the integration of deep learning has significantly improved the robustness and automation of feature extraction from CSI in complex environments.This paper provides a comprehensive review of deep learning-enhanced human sensing based on CSI.We first outline mainstream CSI acquisition tools and their hardware specifications,then provide a detailed discussion of preprocessing methods such as denoising,time–frequency transformation,data segmentation,and augmentation.Subsequently,we categorize deep learning approaches according to sensing tasks—namely detection,localization,and recognition—and highlight representative models across application scenarios.Finally,we examine key challenges including domain generalization,multi-user interference,and limited data availability,and we propose future research directions involving lightweight model deployment,multimodal data fusion,and semantic-level sensing.展开更多
Photocatalysis uses solar energy to convert nitrogen and water directly into ammonia,helping reduce dependence on fossil fuels and offering a way to integrate the nitrogen cycle into a clean energy network.Ohmic junct...Photocatalysis uses solar energy to convert nitrogen and water directly into ammonia,helping reduce dependence on fossil fuels and offering a way to integrate the nitrogen cycle into a clean energy network.Ohmic junctions between metals and semiconductors have demonstrated significant advantages in enhancing stability and reducing carrier recombination,but their application in photocatalytic nitrogen fixation is limited due to the difficulty of work function matching and the complexity of fabrication processes.In this study,density functional theory(DFT) calculations were used to confirm the work function matching between Bi and Bi_(2)Ti_(2)O_(7)(BTO),ensuring the formation of an Ohmic junction.A Bi-Bi_(2)Ti_(2)O_(7)(B-BTO) composite was successfully synthesized via a one-step hydrothermal method,using bismuth nitrate and titanium sulfate as precursors.Compared to pure BTO,the B-BTO heterojunction,driven by dual electron injection from both metal Bi and BTO,significantly increased the ammonia synthesis rate to 686.95 μmol g^(-1)h^(-1),making it the most active nitrogen fixation material among similar pyrochlorebased catalysts to date.The differential charge density calculations,photocurrent(i-t) measurements,and photoluminescence(PL) tests further validate the role of Ohmic contacts in enhancing charge transfer and prolonging carrier lifetimes.This research provides valuable insight into the application of Ohmic junctions in photocatalytic nitrogen fixation and contributes to advancements in this field.展开更多
The effects of a fine water mist environment in a semi-confined blast chamber on the chemical and thermodynamic processes following detonation of a 20 g PE4 explosive charge have been investigated.The effects were qua...The effects of a fine water mist environment in a semi-confined blast chamber on the chemical and thermodynamic processes following detonation of a 20 g PE4 explosive charge have been investigated.The effects were quantified by the analysis of pressure profiles recorded where several parameters including arrival time of the shock at the sensors, peak overpressures, specific impulse of the positive phase, period of the negative phase and the specific impulse of the multiple reflections were quantified.The effect of the fine water mist on the arrival time, peak pressures and the specific impulse of the positive phase agrees with previous findings in literature. In this paper, the focus is on the implications of the fine water mist on the negative phase and the impulse of multiple pressure reflections. The period of the negative phase was found to have increased by 40% and with higher negative peak pressure in the mist condition compared to the atmospheric condition. The activities of the multiple pressure reflections were found to have decreased considerably, both in number and in amplitude leading to lower impulses(by about 60%) for the water mist conditions.展开更多
Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information ...Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.展开更多
The central nervous system, information integration center of the body, is mainly composed of neurons and glial cells. The neuron is one of the most basic and important structural and functional units of the central n...The central nervous system, information integration center of the body, is mainly composed of neurons and glial cells. The neuron is one of the most basic and important structural and functional units of the central nervous system, with sensory stimulation and excitation conduction functions. Astrocytes and microglia belong to the glial cell family, which is the main source of cytokines and represents the main defense system of the central nervous system. Nerve cells undergo neurotransmission or gliotransmission, which regulates neuronal activity via the ion channels, receptors, or transporters expressed on nerve cell membranes. Ion channels, composed of large transmembrane proteins, play crucial roles in maintaining nerve cell homeostasis. These channels are also important for control of the membrane potential and in the secretion of neurotransmitters. A variety of cellular functions and life activities, including functional regulation of the central nervous system, the generation and conduction of nerve excitation, the occurrence of receptor potential, heart pulsation, smooth muscle peristalsis, skeletal muscle contraction, and hormone secretion, are closely related to ion channels associated with passive transmembrane transport. Two types of ion channels in the central nervous system, potassium channels and calcium channels, are closely related to various neurological disorders, including Alzheimer's disease, Parkinson's disease, and epilepsy. Accordingly, various drugs that can affect these ion channels have been explored deeply to provide new directions for the treatment of these neurological disorders. In this review, we focus on the functions of potassium and calcium ion channels in different nerve cells and their involvement in neurological disorders such as Parkinson's disease, Alzheimer's disease, depression, epilepsy, autism, and rare disorders. We also describe several clinical drugs that target potassium or calcium channels in nerve cells and could be used to treat these disorders. We concluded that there are few clinical drugs that can improve the pathology these diseases by acting on potassium or calcium ions. Although a few novel ion-channelspecific modulators have been discovered, meaningful therapies have largely not yet been realized. The lack of target-specific drugs, their requirement to cross the blood–brain barrier, and their exact underlying mechanisms all need further attention. This review aims to explain the urgent problems that need research progress and provide comprehensive information aiming to arouse the research community's interest in the development of ion channel-targeting drugs and the identification of new therapeutic targets for that can increase the cure rate of nervous system diseases and reduce the occurrence of adverse reactions in other systems.展开更多
CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pe...CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.展开更多
Current experimental and computational methods have limitations in accurately and efficiently classifying ion channels within vast protein spaces.Here we have developed a deep learning algorithm,GPT2 Ion Channel Class...Current experimental and computational methods have limitations in accurately and efficiently classifying ion channels within vast protein spaces.Here we have developed a deep learning algorithm,GPT2 Ion Channel Classifier(GPT2-ICC),which effectively distinguishing ion channels from a test set containing approximately 239 times more non-ion-channel proteins.GPT2-ICC integrates representation learning with a large language model(LLM)-based classifier,enabling highly accurate identification of potential ion channels.Several potential ion channels were predicated from the unannotated human proteome,further demonstrating GPT2-ICC’s generalization ability.This study marks a significant advancement in artificial-intelligence-driven ion channel research,highlighting the adaptability and effectiveness of combining representation learning with LLMs to address the challenges of imbalanced protein sequence data.Moreover,it provides a valuable computational tool for uncovering previously uncharacterized ion channels.展开更多
This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to d...This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to determine which configuration can provide better heat and mass transfer and lower entropy production,while ensuring cost efficiency.This work bridges the gap be-tween academic research and industrial feasibility by incorporating cost analysis,entropy generation,and thermal efficiency.To compare the velocity,temperature,and concentration profiles,we examine two ternary nanofluids,i.e.,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O and TiO_(2)+SiO_(2)+Cu/H_(2)O,while considering the shape of nanoparticles.The velocity slip and Soret/Dufour effects are taken into consideration.Furthermore,regression analysis for Nusselt and Sherwood numbers of the model is carried out.The Runge-Kutta fourth-order method with shooting technique is employed to acquire the numerical solution of the governed system of ordinary differential equations.The flow pattern attributes of ternary nanofluids are meticulously examined and simulated with the fluc-tuation of flow-dominating parameters.Additionally,the influence of these parameters is demonstrated in the flow,temperature,and concentration fields.For variation in Eckert and Dufour numbers,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher temperature than TiO_(2)+SiO_(2)+Cu/H_(2)O.The results obtained indicate that the ternary nanofluid TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher heat transfer rate,lesser entropy generation,greater mass transfer rate,and lower cost than that of TiO_(2)+SiO_(2)+Cu/H_(2)O ternary nanofluid.展开更多
To accurately diagnosemisfire faults in automotive engines,we propose a Channel Attention Convolutional Model,specifically the Squeeze-and-Excitation Networks(SENET),for classifying engine vibration signals and precis...To accurately diagnosemisfire faults in automotive engines,we propose a Channel Attention Convolutional Model,specifically the Squeeze-and-Excitation Networks(SENET),for classifying engine vibration signals and precisely pinpointing misfire faults.In the experiment,we established a total of 11 distinct states,encompassing the engine’s normal state,single-cylinder misfire faults,and dual-cylinder misfire faults for different cylinders.Data collection was facilitated by a highly sensitive acceleration signal collector with a high sampling rate of 20,840Hz.The collected data were methodically divided into training and testing sets based on different experimental groups to ensure generalization and prevent overlap between the two sets.The results revealed that,with a vibration acceleration sequence of 1000 time steps(approximately 50 ms)as input,the SENET model achieved a misfire fault detection accuracy of 99.8%.For comparison,we also trained and tested several commonly used models,including Long Short-Term Memory(LSTM),Transformer,and Multi-Scale Residual Networks(MSRESNET),yielding accuracy rates of 84%,79%,and 95%,respectively.This underscores the superior accuracy of the SENET model in detecting engine misfire faults compared to other models.Furthermore,the F1 scores for each type of recognition in the SENET model surpassed 0.98,outperforming the baseline models.Our analysis indicated that the misclassified samples in the LSTM and Transformer models’predictions were primarily due to intra-class misidentifications between single-cylinder and dual-cylinder misfire scenarios.To delve deeper,we conducted a visual analysis of the features extracted by the LSTM and SENET models using T-distributed Stochastic Neighbor Embedding(T-SNE)technology.The findings revealed that,in the LSTMmodel,data points of the same type tended to cluster together with significant overlap.Conversely,in the SENET model,data points of various types were more widely and evenly dispersed,demonstrating its effectiveness in distinguishing between different fault types.展开更多
Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batterie...Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.展开更多
Responding to the stochasticity and uncertainty in the power height of distributed photovoltaic power generation.This paper presents a distributed photovoltaic ultra-short-term power forecasting method based on Variat...Responding to the stochasticity and uncertainty in the power height of distributed photovoltaic power generation.This paper presents a distributed photovoltaic ultra-short-term power forecasting method based on Variational Mode Decomposition(VMD)and Channel Attention Mechanism.First,Pearson’s correlation coefficient was utilized to filter out the meteorological factors that had a high impact on historical power.Second,the distributed PV power data were decomposed into a relatively smooth power series with different fluctuation patterns using variational modal decomposition(VMD).Finally,the reconstructed distributed PV power as well as other features are input into the combined CNN-SENet-BiLSTM model.In this model,the convolutional neural network(CNN)and channel attention mechanism dynamically adjust the weights while capturing the spatial features of the input data to improve the discriminative ability of key features.The extracted data is then fed into the bidirectional long short-term memory network(BiLSTM)to capture the time-series features,and the final output is the prediction result.The verification is conducted using a dataset from a distributed photovoltaic power station in the Northwest region of China.The results show that compared with other prediction methods,the method proposed in this paper has a higher prediction accuracy,which helps to improve the proportion of distributed PV access to the grid,and can guarantee the safe and stable operation of the power grid.展开更多
Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass rat...Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass ratio,has not been systematically carried out.In this paper,the heat transfer and flow characteristics of related high temperature fuels are studied by using typical engine parallel channel structure.Through numeri⁃cal simulation and systematic experimental verification,the flow and heat transfer characteristics of parallel chan⁃nels under typical working conditions are obtained,and the effectiveness of high-precision calculation method is preliminarily established.It is known that the stable time required for hot start of regenerative cooling engine is about 50 s,and the flow resistance of parallel channel structure first increases and then decreases with the in⁃crease of equivalence ratio(The following equivalence ratio is expressed byΦ),and there is a flow resistance peak in the range ofΦ=0.5~0.8.This is mainly caused by the coupling effect of high temperature physical proper⁃ties,flow rate and pressure of fuel in parallel channels.At the same time,the cooling and heat transfer character⁃istics of parallel channels under some conditions of high heat-mass ratio are obtained,and the main factors affect⁃ing the heat transfer of parallel channels such as improving surface roughness and strengthening heat transfer are mastered.In the experiment,whenΦis less than 0.9,the phenomenon of local heat transfer enhancement and deterioration can be obviously observed,and the temperature rise of local structures exceeds 200℃,which is the risk of structural damage.Therefore,the reliability of long-term parallel channel structure under the condition of high heat-mass ratio should be fully considered in structural design.展开更多
The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the rel...The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the relationships among the length,width,height,and spacing of pin fins;the maximum temperature and temperature difference of the battery module;and the pressure drop of the liquid-cooling plate.Model accuracy is verified via variance analysis.The new liquid-cooling plate enables the power battery to work within an optimal temperature range.Appropriately increasing the length,width,and height and reducing the spacing of pin fins could reduce the temperature of the power battery module and improve the temperature uniformity.However,the pressure drop of the liquid-cooling plate increases.The structural parameters of the pin fins are optimized to minimize the maximum temperature and the temperature difference of the battery module as well as the pressure drop of the liquid-cooling plate.The errors between the values predicted and actual by the simulation test are 0.58%,4%,and 0.48%,respectively,which further verifies the model accuracy.The results reveal the influence of the structural parameters of the pin fins inside the liquid-cooling plate on its heat dissipation performance and pressure drop characteristics.A theoretical basis is provided for the design of liquid-cooling plates in power batteries and the optimization of structural parameters.展开更多
基金Supported by the National Natural Science Foundation of China(51276090)
文摘Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.
基金supported by the Natural Science Foundation of Shandong Province under Grant ZR2024MF062the open research fund of National Mobile Communications Research Laboratory,Southeast University under Grants 2025D03+1 种基金the Future Plan Program for Young Scholars of Shandong University,and the Innovation and Technology Support Program for Young Scholars of Colleges and Universities in Shandong Province under Grant 2022KJ009The B6G R&D Group in Shandong University is greatly thanked for channel measurements.
文摘The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金supported by the National Natural Science Foundation of China,Nos.82172196(to KX),82372507(to KX)the Natural Science Foundation of Hunan Province,China,No.2023JJ40804(to QZ)the Key Laboratory of Emergency and Trauma(Hainan Medical University)of the Ministry of Education,China,No.KLET-202210(to QZ)。
文摘Ischemia–reperfusion injury is a common pathophysiological mechanism in retinal degeneration.PANoptosis is a newly defined integral form of regulated cell death that combines the key features of pyroptosis,apoptosis,and necroptosis.Oligomerization of mitochondrial voltage-dependent anion channel 1 is an important pathological event in regulating cell death in retinal ischemia–reperfusion injury.However,its role in PANoptosis remains largely unknown.In this study,we demonstrated that voltage-dependent anion channel 1 oligomerization-mediated mitochondrial dysfunction was associated with PANoptosis in retinal ischemia–reperfusion injury.Inhibition of voltage-dependent anion channel 1 oligomerization suppressed mitochondrial dysfunction and PANoptosis in retinal cells subjected to ischemia–reperfusion injury.Mechanistically,mitochondria-derived reactive oxygen species played a central role in the voltagedependent anion channel 1-mediated regulation of PANoptosis by promoting PANoptosome assembly.Moreover,inhibiting voltage-dependent anion channel 1 oligomerization protected against PANoptosis in the retinas of rats subjected to ischemia–reperfusion injury.Overall,our findings reveal the critical role of voltage-dependent anion channel 1 oligomerization in regulating PANoptosis in retinal ischemia–reperfusion injury,highlighting voltage-dependent anion channel 1 as a promising therapeutic target.
基金supported by ANID-FONDECYT 1200908(to JF),ANID-FONDECYT 1211082 and 1250856(to GEY)by the Millennium Nucleus for the Study of Pain NCN19_038(Mi Nu SPain)(to GEY)funded by the ANID scholarship 21201176。
文摘Numerous pathological states of the nervous system involve alterations in neuronal excitability and synaptic dysfunction,which depend on the function of ion channels.Due to their critical involvement in health and disease,the search for new compounds that modulate these proteins is still relevant.Traditional medicine has long been a rich source of neuroactive compounds.For example,the indigenous Mapuche people have used the leaves and bark of the Drimys winteri tree for centuries to treat various diseases.Consequently,several studies have investigated the biological effects of compounds in Drimys winteri,highlighting sesquiterpenes such asα-humulene,drimenin,polygodial,andα-,β-,γ-eudesmol.However,there is currently no literature review focusing on the ability of these sesquiterpenes to modulate ion channels.This review summarizes the current knowledge about neuroactive compounds found in Drimys winteri,with special emphasis on their direct actions on neuronal ion channels.Several Drimys winteri sesquiterpenes modulate a diverse array of neuronal ion channels,including transient receptor potential channels,gamma-aminobutyric acid A receptors,nicotinic acetylcholine receptors,and voltage-dependent Ca^(2+)and Na^(+)channels.Interestingly,the modulation of these molecular targets by Drimys winteri sesquiterpenes correlates with their therapeutic actions.The promiscuous pharmacological profile of Drimys winteri sesquiterpenes suggests they modulate multiple protein targets in vivo,making them potentially useful for treating complex,multifactorial diseases.Further studies at the molecular level may aid in developing multitargeted drugs with enhanced therapeutic effects.
基金supported by National Natural Science Foundation(NNSF)of China under Grant 62001351the Foundation of National Key Laboratory of Electromagnetic Environment(6142403220202)the Stability Support Fund for Basic Military Industrial Research Institutes(A240104130).
文摘The orthogonal time frequency space(OTFS)modulation is a novel modulation scheme that can effectively cope with the high Doppler expansion caused by high mobility.Since it modulates data on delay-Doppler(DD)domain and makes full use of the sparse characteristics of DD domain,it has been widely studied to design efficient channel estimation and signal detection schemes.In this paper,we design a novel superimposed pilot pattern with transition band,which replaces the traditional embedded pilot(EP)guard zero-symbols,and perform a two-stage channel estimation.In the first stage,we fully utilize the dispersion characteristics of OTFS signal in DD domain,and use threshold decision to make coarse channel estimation.In the second stage,we use the results of the coarse estimation for iterative signal detection and accurate channel estimation.During the second stage,we make full use of the sparsity of the channel in DD domain,remodel the received signal into the form of sparse channel vector multiplied by channel coefficient matrix,and introduce Doppler index segmentation factor(DISF)to subdivide the Doppler index to solve the problem of fractional Doppler.Simulations reveal that,the scheme proposed in this paper has higher spectral efficiency compared with traditional EP scheme and lower peak-to-average power ratio(PAPR)compared with traditional superimposed pilot scheme.
基金supported by National Natural Science Foundation of China(NSFC)under grant U23A20310.
文摘With the growing advancement of wireless communication technologies,WiFi-based human sensing has gained increasing attention as a non-intrusive and device-free solution.Among the available signal types,Channel State Information(CSI)offers fine-grained temporal,frequency,and spatial insights into multipath propagation,making it a crucial data source for human-centric sensing.Recently,the integration of deep learning has significantly improved the robustness and automation of feature extraction from CSI in complex environments.This paper provides a comprehensive review of deep learning-enhanced human sensing based on CSI.We first outline mainstream CSI acquisition tools and their hardware specifications,then provide a detailed discussion of preprocessing methods such as denoising,time–frequency transformation,data segmentation,and augmentation.Subsequently,we categorize deep learning approaches according to sensing tasks—namely detection,localization,and recognition—and highlight representative models across application scenarios.Finally,we examine key challenges including domain generalization,multi-user interference,and limited data availability,and we propose future research directions involving lightweight model deployment,multimodal data fusion,and semantic-level sensing.
基金supported by the Natural Science Foundation of China (NSFC,No.52372212)。
文摘Photocatalysis uses solar energy to convert nitrogen and water directly into ammonia,helping reduce dependence on fossil fuels and offering a way to integrate the nitrogen cycle into a clean energy network.Ohmic junctions between metals and semiconductors have demonstrated significant advantages in enhancing stability and reducing carrier recombination,but their application in photocatalytic nitrogen fixation is limited due to the difficulty of work function matching and the complexity of fabrication processes.In this study,density functional theory(DFT) calculations were used to confirm the work function matching between Bi and Bi_(2)Ti_(2)O_(7)(BTO),ensuring the formation of an Ohmic junction.A Bi-Bi_(2)Ti_(2)O_(7)(B-BTO) composite was successfully synthesized via a one-step hydrothermal method,using bismuth nitrate and titanium sulfate as precursors.Compared to pure BTO,the B-BTO heterojunction,driven by dual electron injection from both metal Bi and BTO,significantly increased the ammonia synthesis rate to 686.95 μmol g^(-1)h^(-1),making it the most active nitrogen fixation material among similar pyrochlorebased catalysts to date.The differential charge density calculations,photocurrent(i-t) measurements,and photoluminescence(PL) tests further validate the role of Ohmic contacts in enhancing charge transfer and prolonging carrier lifetimes.This research provides valuable insight into the application of Ohmic junctions in photocatalytic nitrogen fixation and contributes to advancements in this field.
文摘The effects of a fine water mist environment in a semi-confined blast chamber on the chemical and thermodynamic processes following detonation of a 20 g PE4 explosive charge have been investigated.The effects were quantified by the analysis of pressure profiles recorded where several parameters including arrival time of the shock at the sensors, peak overpressures, specific impulse of the positive phase, period of the negative phase and the specific impulse of the multiple reflections were quantified.The effect of the fine water mist on the arrival time, peak pressures and the specific impulse of the positive phase agrees with previous findings in literature. In this paper, the focus is on the implications of the fine water mist on the negative phase and the impulse of multiple pressure reflections. The period of the negative phase was found to have increased by 40% and with higher negative peak pressure in the mist condition compared to the atmospheric condition. The activities of the multiple pressure reflections were found to have decreased considerably, both in number and in amplitude leading to lower impulses(by about 60%) for the water mist conditions.
基金supported in part by the National Key Research and Development Program of China under Grant No.2024YFE0200600the Zhejiang Provincial Natural Science Foundation of China under Grant No.LR23F010005the Huawei Cooperation Project under Grant No.TC20240829036。
文摘Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.
基金supported by the National Natural Science Foundation of China,Nos.81901098(to TC),82201668(to HL)Fujian Provincial Health Technology Project,No.2021QNA072(to HL)。
文摘The central nervous system, information integration center of the body, is mainly composed of neurons and glial cells. The neuron is one of the most basic and important structural and functional units of the central nervous system, with sensory stimulation and excitation conduction functions. Astrocytes and microglia belong to the glial cell family, which is the main source of cytokines and represents the main defense system of the central nervous system. Nerve cells undergo neurotransmission or gliotransmission, which regulates neuronal activity via the ion channels, receptors, or transporters expressed on nerve cell membranes. Ion channels, composed of large transmembrane proteins, play crucial roles in maintaining nerve cell homeostasis. These channels are also important for control of the membrane potential and in the secretion of neurotransmitters. A variety of cellular functions and life activities, including functional regulation of the central nervous system, the generation and conduction of nerve excitation, the occurrence of receptor potential, heart pulsation, smooth muscle peristalsis, skeletal muscle contraction, and hormone secretion, are closely related to ion channels associated with passive transmembrane transport. Two types of ion channels in the central nervous system, potassium channels and calcium channels, are closely related to various neurological disorders, including Alzheimer's disease, Parkinson's disease, and epilepsy. Accordingly, various drugs that can affect these ion channels have been explored deeply to provide new directions for the treatment of these neurological disorders. In this review, we focus on the functions of potassium and calcium ion channels in different nerve cells and their involvement in neurological disorders such as Parkinson's disease, Alzheimer's disease, depression, epilepsy, autism, and rare disorders. We also describe several clinical drugs that target potassium or calcium channels in nerve cells and could be used to treat these disorders. We concluded that there are few clinical drugs that can improve the pathology these diseases by acting on potassium or calcium ions. Although a few novel ion-channelspecific modulators have been discovered, meaningful therapies have largely not yet been realized. The lack of target-specific drugs, their requirement to cross the blood–brain barrier, and their exact underlying mechanisms all need further attention. This review aims to explain the urgent problems that need research progress and provide comprehensive information aiming to arouse the research community's interest in the development of ion channel-targeting drugs and the identification of new therapeutic targets for that can increase the cure rate of nervous system diseases and reduce the occurrence of adverse reactions in other systems.
基金project was supported by the Fund of State Key Laboratory of Deep Oil and Gas,China University of Petroleum(East China)(No.SKLDOG2024-ZYRC-06)Key Program of National Natural Science Foundation of China(52130401)+1 种基金National Natural Science Foundation of China(52104055,52374058)Shandong Provincial Natural Science Foundation,China(ZR2021ME171,ZR2024YQ043)。
文摘CO_(2)flooding enhanced oil recovery(CO_(2)-EOR)represents a significant technology in the low permeability reservoir.With the fractures and heterogeneity in low permeability reservoirs,CO_(2)-EOR is susceptible to pessimistic gas channeling.Consequently,there is a need to develop conformance control materials that can be used in CO_(2)-EOR.Herein,to address the challenges of low strength and poor stability of polymer gel in high temperature and low permeability reservoirs,a new organic/metal ion composite crosslinking polymer gel(AR-Gel)is reported,which is formed by low hydrolysis and medium to high molecular weight polymer(CX-305),organic crosslinking agent(phenolic resin),and aluminium citrate(AI(Ⅲ)).The crosslinking of AI(Ⅲ)with carboxyl group and organic/metal ion double crosslinking can construct a more complex and stable polymer gel structure on the basis of traditional chemical crosslinking,to cope with the harsh conditions such as high temperature.The structure-activity relationship of AR-Gel was revealed by rheology behavior and micro-morphology.The applicability of AR-Gel in reservoir was investigated,as was its strength and stability in supercritical CO_(2).The anti-gas channeling and enhanced oil recovery of AR-Gel were investigated using low permeability fractured cores,and the field process parameters were provided.The gel can be used to meet supercritical CO_(2)reservoirs at 110℃and 20,000 mg/L salinity,with long-term stability over 60 days.The plugging rate of AR-Gel for fractured co re was 97%,with subsequent CO_(2)flooding re sulting in an enhanced oil recovery by 34.5%.ARGel can effectively control CO_(2)gas channeling and enhanced oil recovery.It offers a new material with high strength and temperature resistance,which is particularly beneficial in the CO_(2)flooding for the conformance control of oil field.
基金funded by grants from the National Key Research and Development Program of China(Grant Nos.:2022YFE0205600 and 2022YFC3400504)the National Natural Science Foundation of China(Grant Nos.:82373792 and 82273857)the Fundamental Research Funds for the Central Universities,China,and the East China Normal University Medicine and Health Joint Fund,China(Grant No.:2022JKXYD07001).
文摘Current experimental and computational methods have limitations in accurately and efficiently classifying ion channels within vast protein spaces.Here we have developed a deep learning algorithm,GPT2 Ion Channel Classifier(GPT2-ICC),which effectively distinguishing ion channels from a test set containing approximately 239 times more non-ion-channel proteins.GPT2-ICC integrates representation learning with a large language model(LLM)-based classifier,enabling highly accurate identification of potential ion channels.Several potential ion channels were predicated from the unannotated human proteome,further demonstrating GPT2-ICC’s generalization ability.This study marks a significant advancement in artificial-intelligence-driven ion channel research,highlighting the adaptability and effectiveness of combining representation learning with LLMs to address the challenges of imbalanced protein sequence data.Moreover,it provides a valuable computational tool for uncovering previously uncharacterized ion channels.
基金supported by DST-FIST(Government of India)(Grant No.SR/FIST/MS-1/2017/13)and Seed Money Project(Grant No.DoRDC/733).
文摘This study numerically examines the heat and mass transfer characteristics of two ternary nanofluids via converging and diverg-ing channels.Furthermore,the study aims to assess two ternary nanofluids combinations to determine which configuration can provide better heat and mass transfer and lower entropy production,while ensuring cost efficiency.This work bridges the gap be-tween academic research and industrial feasibility by incorporating cost analysis,entropy generation,and thermal efficiency.To compare the velocity,temperature,and concentration profiles,we examine two ternary nanofluids,i.e.,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O and TiO_(2)+SiO_(2)+Cu/H_(2)O,while considering the shape of nanoparticles.The velocity slip and Soret/Dufour effects are taken into consideration.Furthermore,regression analysis for Nusselt and Sherwood numbers of the model is carried out.The Runge-Kutta fourth-order method with shooting technique is employed to acquire the numerical solution of the governed system of ordinary differential equations.The flow pattern attributes of ternary nanofluids are meticulously examined and simulated with the fluc-tuation of flow-dominating parameters.Additionally,the influence of these parameters is demonstrated in the flow,temperature,and concentration fields.For variation in Eckert and Dufour numbers,TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher temperature than TiO_(2)+SiO_(2)+Cu/H_(2)O.The results obtained indicate that the ternary nanofluid TiO_(2)+SiO_(2)+Al_(2)O_(3)/H_(2)O has a higher heat transfer rate,lesser entropy generation,greater mass transfer rate,and lower cost than that of TiO_(2)+SiO_(2)+Cu/H_(2)O ternary nanofluid.
基金Yongxian Huang supported by Projects of Guangzhou Science and Technology Plan(2023A04J0409)。
文摘To accurately diagnosemisfire faults in automotive engines,we propose a Channel Attention Convolutional Model,specifically the Squeeze-and-Excitation Networks(SENET),for classifying engine vibration signals and precisely pinpointing misfire faults.In the experiment,we established a total of 11 distinct states,encompassing the engine’s normal state,single-cylinder misfire faults,and dual-cylinder misfire faults for different cylinders.Data collection was facilitated by a highly sensitive acceleration signal collector with a high sampling rate of 20,840Hz.The collected data were methodically divided into training and testing sets based on different experimental groups to ensure generalization and prevent overlap between the two sets.The results revealed that,with a vibration acceleration sequence of 1000 time steps(approximately 50 ms)as input,the SENET model achieved a misfire fault detection accuracy of 99.8%.For comparison,we also trained and tested several commonly used models,including Long Short-Term Memory(LSTM),Transformer,and Multi-Scale Residual Networks(MSRESNET),yielding accuracy rates of 84%,79%,and 95%,respectively.This underscores the superior accuracy of the SENET model in detecting engine misfire faults compared to other models.Furthermore,the F1 scores for each type of recognition in the SENET model surpassed 0.98,outperforming the baseline models.Our analysis indicated that the misclassified samples in the LSTM and Transformer models’predictions were primarily due to intra-class misidentifications between single-cylinder and dual-cylinder misfire scenarios.To delve deeper,we conducted a visual analysis of the features extracted by the LSTM and SENET models using T-distributed Stochastic Neighbor Embedding(T-SNE)technology.The findings revealed that,in the LSTMmodel,data points of the same type tended to cluster together with significant overlap.Conversely,in the SENET model,data points of various types were more widely and evenly dispersed,demonstrating its effectiveness in distinguishing between different fault types.
基金National Key R&D Program of China,Grant/Award Number:2023YFB2503900National Natural Science Foundation of China,Grant/Award Number:12172143Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20220818100418040,JCYJ20220530160816038。
文摘Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.
基金supported by the Inner Mongolia Power Company 2024 Staff Innovation Studio Innovation Project“Research on Cluster Output Prediction and Group Control Technology for County-Wide Distributed Photovoltaic Construction”.
文摘Responding to the stochasticity and uncertainty in the power height of distributed photovoltaic power generation.This paper presents a distributed photovoltaic ultra-short-term power forecasting method based on Variational Mode Decomposition(VMD)and Channel Attention Mechanism.First,Pearson’s correlation coefficient was utilized to filter out the meteorological factors that had a high impact on historical power.Second,the distributed PV power data were decomposed into a relatively smooth power series with different fluctuation patterns using variational modal decomposition(VMD).Finally,the reconstructed distributed PV power as well as other features are input into the combined CNN-SENet-BiLSTM model.In this model,the convolutional neural network(CNN)and channel attention mechanism dynamically adjust the weights while capturing the spatial features of the input data to improve the discriminative ability of key features.The extracted data is then fed into the bidirectional long short-term memory network(BiLSTM)to capture the time-series features,and the final output is the prediction result.The verification is conducted using a dataset from a distributed photovoltaic power station in the Northwest region of China.The results show that compared with other prediction methods,the method proposed in this paper has a higher prediction accuracy,which helps to improve the proportion of distributed PV access to the grid,and can guarantee the safe and stable operation of the power grid.
文摘Due to the complex high-temperature characteristics of hydrocarbon fuel,the research on the long-term working process of parallel channel structure under variable working conditions,especially under high heat-mass ratio,has not been systematically carried out.In this paper,the heat transfer and flow characteristics of related high temperature fuels are studied by using typical engine parallel channel structure.Through numeri⁃cal simulation and systematic experimental verification,the flow and heat transfer characteristics of parallel chan⁃nels under typical working conditions are obtained,and the effectiveness of high-precision calculation method is preliminarily established.It is known that the stable time required for hot start of regenerative cooling engine is about 50 s,and the flow resistance of parallel channel structure first increases and then decreases with the in⁃crease of equivalence ratio(The following equivalence ratio is expressed byΦ),and there is a flow resistance peak in the range ofΦ=0.5~0.8.This is mainly caused by the coupling effect of high temperature physical proper⁃ties,flow rate and pressure of fuel in parallel channels.At the same time,the cooling and heat transfer character⁃istics of parallel channels under some conditions of high heat-mass ratio are obtained,and the main factors affect⁃ing the heat transfer of parallel channels such as improving surface roughness and strengthening heat transfer are mastered.In the experiment,whenΦis less than 0.9,the phenomenon of local heat transfer enhancement and deterioration can be obviously observed,and the temperature rise of local structures exceeds 200℃,which is the risk of structural damage.Therefore,the reliability of long-term parallel channel structure under the condition of high heat-mass ratio should be fully considered in structural design.
基金supported by the Education and Teaching Research Project of Universities in Fujian Province(FBJY20230167).
文摘The work takes a new liquid-cooling plate in a power battery with pin fins inside the channel as the object.A mathematical model is established via the central composite design of the response surface to study the relationships among the length,width,height,and spacing of pin fins;the maximum temperature and temperature difference of the battery module;and the pressure drop of the liquid-cooling plate.Model accuracy is verified via variance analysis.The new liquid-cooling plate enables the power battery to work within an optimal temperature range.Appropriately increasing the length,width,and height and reducing the spacing of pin fins could reduce the temperature of the power battery module and improve the temperature uniformity.However,the pressure drop of the liquid-cooling plate increases.The structural parameters of the pin fins are optimized to minimize the maximum temperature and the temperature difference of the battery module as well as the pressure drop of the liquid-cooling plate.The errors between the values predicted and actual by the simulation test are 0.58%,4%,and 0.48%,respectively,which further verifies the model accuracy.The results reveal the influence of the structural parameters of the pin fins inside the liquid-cooling plate on its heat dissipation performance and pressure drop characteristics.A theoretical basis is provided for the design of liquid-cooling plates in power batteries and the optimization of structural parameters.
