An adaptive ramp generator based on linear histogram was proposed for the built-in selftest (BIST) of analog to digital convertor (ADC) in CMOS image sensor. By comparing the generated ramp signal to a reference volta...An adaptive ramp generator based on linear histogram was proposed for the built-in selftest (BIST) of analog to digital convertor (ADC) in CMOS image sensor. By comparing the generated ramp signal to a reference voltage and feeding back a calibration signal, the slope adjustment was implemented, and high linearity and precision of ramp slope were realized. By modulating the pulse width and reference voltage, sweep length varied from microsecond to second and signal swing could reach 3 V with 5.6 mW power consumption. The ramp was used as input to an ideal 10-bit single-slope ADC, and the corresponding DNL and INL were 0.032 LSB and 0.078 LSB, re-spectively.展开更多
An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapt...An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapter board technology.Four layers of high-resistance silicon substrate stack packaging are implemented based on the wafer-level gold-gold bonding process.Each layer adopts though silicon via(TSV)technology to realize signal interconnection.A core monolithic integrated microwave chip(MMIC)is embedded in the silicon cavity,and the silicon-based filter is integrated with the high-resistance silicon substrate.The interconnect line,cavity and filter of the silicon-based adapter board are designed with AutoCAD,and HFSS is adopted for 3D electromagnetic field simulation.According to the measured results,the radio frequency(RF)of the mixing multi-function chip is 40-44 GHz and its intermediate frequency(IF)can cover the Ku band with a chip size of 10 mm×11 mm×1 mm.The multiplier multi-function chip operates at 16-20 GHz.The fundamental suppression is greater than 50 dB and the second harmonic suppression is better than 40 dB with a chip size of 8 mm×8 mm×1 mm.The cascaded fully assembled mixing component achieves a spur of better than-50 dBc and a gain of better than 15 dB.展开更多
To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separa...To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separation process, considering elastic forces of separating springs, hydrodynamic forces, gravity and buoyancy. Moreover, a criterion based on the maximum separating distance is put forward to determine whether adapters separate with the missile reliably. The results show that the magnitude and position of elastic force, the wedge angle and mass of the adapter significantly affect the separating process. The local sensitivity analysis for the reference status of design parameters demonstrates that the wedge angle of adapters has the maximum influence about 70. 4% on the separating distance.展开更多
This paper describes a versatile and computationally efficient method for coupling several finite element analysis(FEA)programs together so that the unique modeling and analysis capabilities of each code can be utiliz...This paper describes a versatile and computationally efficient method for coupling several finite element analysis(FEA)programs together so that the unique modeling and analysis capabilities of each code can be utilized simultaneously to simulate the static or dynamic response of a complete numerical system.An arbitrary number of finite element analysis software packages can be coupled by adding two special types of elements,namely generic and adapter elements,to each of the finite element applications using their programming interface.These elements are inserted at the interfaces between the different sub-domains of the complete system modeled by each finite element analysis software package.Exchange of data between the coupled FEA codes is accomplished in a modular and synchronized manner using OpenFresco(Opensource Framework for Experimental Setup and Control).OpenFresco is an objectoriented,environment independent software framework initially developed for hybrid simulation in which certain aspects of a complete structure are simulated numerically and other aspects are simultaneously tested physically.An important practical advantage of this coupled analysis approach is that all of the connected FEA codes run concurrently and continuously,decreasing analysis time consumption by an order of magnitude or more compared to more traditional approaches that shut down and restart the coupled analysis codes at each integration time step.The implementation and accuracy of this approach to FE software coupling are demonstrated using dynamic analyses of three simple structural models from the field of earthquake engineering.展开更多
High power lasers (> +21dBm) have gradually become the common solution for signal transmitting systems including regional cable television, Fiber To The Home (FTTH), and gigabit passive optical networks (G- PONs) d...High power lasers (> +21dBm) have gradually become the common solution for signal transmitting systems including regional cable television, Fiber To The Home (FTTH), and gigabit passive optical networks (G- PONs) due to their ability to generate signals that can be transmitted over long distances. However, if protective design is not implemented in the facility at the client side, users may be exposed to health hazards such as eye damage from these high-power lasers. High-power optical adapters with laser shutter use metal masks to prevent eye exposure to direct laser beams. They have progressively replaced conventional optical adapters and entered the market mainstream. Our study uses the Elastic-Plastic theory together with parametric design to investigate the effect of geometry on the initial spring-back angle of a laser shutter. Once the force stabilizes, the angles of the initial spring back are found to be the same as the simulated results for several attempts. In our study, it is observed that factors including the thickness of the metal masking plate, the initial design angle, the stiffness of the material and the boundary conditions have significant influence on the spring back angle. These can be used as references in design control.展开更多
目的探讨在急性缺血性脑卒中患者中应用直接抽吸一次性取栓(A direct aspiration First-Pass thrombectomy,ADAPT)进行血管再通的安全性、可行性及技术优势。方法回顾性分析本院神经内科2021年3月至2023年10月接受血管再通术治疗的54例...目的探讨在急性缺血性脑卒中患者中应用直接抽吸一次性取栓(A direct aspiration First-Pass thrombectomy,ADAPT)进行血管再通的安全性、可行性及技术优势。方法回顾性分析本院神经内科2021年3月至2023年10月接受血管再通术治疗的54例急性脑卒中患者。根据取栓技术的不同,患者被分为研究组(应用ADAPT技术直接抽吸取栓,34例)和对照组[应用Solitaire FR支架机械取栓术(Solitaire FR with intracranial support catheter for mechanical thrombectomy,SWIM),20例]。比较两组的取栓次数、手术操作时间、血管完全再通率、术前与术后2周美国国立卫生研究院卒中量表(National institutes of health stroke scale,NIHSS)评分、并发症发生率及术后3个月良好预后率。结果两组采用不同取栓技术后,研究组的取栓次数和手术操作时间均低于对照组(P<0.05)。术前两组的NIHSS评分差异无统计学意义(P>0.05)。术后2周,研究组的NIHSS评分显著低于对照组(P<0.05)。两组的血管完全再通率分别为70.59%和75.00%,术后3个月良好预后率分别为64.71%和60.00%,两组间差异无统计学意义(P>0.05)。研究组的并发症发生率(8.82%)显著低于对照组(20.00%)(P<0.05)。结论与SWIM取栓技术相比,ADAPT技术在血管再通率上无显著差异,但能显著减少急性脑卒中患者的取栓次数和手术操作时间,提升术后3个月的良好预后率,改善术后2周的NIHSS评分,并降低并发症发生率。ADAPT技术在改善患者功能恢复和降低并发症方面显示了更大的潜力,为急性缺血性脑卒中的临床治疗提供了有力的替代方案。展开更多
ACE(Adaptive Communication Environment)是用于开发高性能网络化应用与下一代中间件的面向对象框架。除了许多专用于开发网络通信软件的设计模式(比如 Reactor、Proactor、Half-Sync/Half-Async,等等),ACE还对GoF的Design Patten一书...ACE(Adaptive Communication Environment)是用于开发高性能网络化应用与下一代中间件的面向对象框架。除了许多专用于开发网络通信软件的设计模式(比如 Reactor、Proactor、Half-Sync/Half-Async,等等),ACE还对GoF的Design Patten一书中的许多设计模式作了大量应用。展开更多
This paper introduces the choices of the technology solutions pertinent to the industrial standard of Chinese communications industry, YD/T 1591 Technical Requirements and Test Method of Charger and lnterface for Mobi...This paper introduces the choices of the technology solutions pertinent to the industrial standard of Chinese communications industry, YD/T 1591 Technical Requirements and Test Method of Charger and lnterface for Mobile Telecommunication Terminal Equipment, as well as its development and revision process. It also elaborates the technology contents for Recommendation of Improving the Standard ITU-TL.1000.展开更多
In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant...In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant computer system on a single chip of 5000 gate CMOS gate array. The design, fabrication and test of this single chip system will be discussed..展开更多
Recently,for developing neuromorphic visual systems,adaptive optoelectronic devices become one of the main research directions and attract extensive focus to achieve optoelectronic transistors with high performances a...Recently,for developing neuromorphic visual systems,adaptive optoelectronic devices become one of the main research directions and attract extensive focus to achieve optoelectronic transistors with high performances and flexible func-tionalities.In this review,based on a description of the biological adaptive functions that are favorable for dynamically perceiv-ing,filtering,and processing information in the varying environment,we summarize the representative strategies for achiev-ing these adaptabilities in optoelectronic transistors,including the adaptation for detecting information,adaptive synaptic weight change,and history-dependent plasticity.Moreover,the key points of the corresponding strategies are comprehen-sively discussed.And the applications of these adaptive optoelectronic transistors,including the adaptive color detection,sig-nal filtering,extending the response range of light intensity,and improve learning efficiency,are also illustrated separately.Lastly,the challenges faced in developing adaptive optoelectronic transistor for artificial vision system are discussed.The descrip-tion of biological adaptive functions and the corresponding inspired neuromorphic devices are expected to provide insights for the design and application of next-generation artificial visual systems.展开更多
Agricultural pests cause enormous losses in annual agricultural production.Understanding the evolutionary responses and adaptive capacity of agricultural pests under climate change is crucial for establishing sustaina...Agricultural pests cause enormous losses in annual agricultural production.Understanding the evolutionary responses and adaptive capacity of agricultural pests under climate change is crucial for establishing sustainable and environmentally friendly agricultural pest management.In this study,we integrate climate modeling and landscape genomics to investigate the distributional dynamics of the cotton bollworm(Helicoverpa armigera)in the adaptation to local environments and resilience to future climate change.Notably,the predicted inhabitable areas with higher suitability for the cotton bollworm could be eight times larger in the coming decades.Climate change is one of the factors driving the dynamics of distribution and population differentiation of the cotton bollworm.Approximately 19,000 years ago,the cotton bollworm expanded from its ancestral African population,followed by gradual occupations of the European,Asian,Oceanian,and American continents.Furthermore,we identify seven subpopulations with high dispersal and adaptability which may have an increased risk of invasion potential.Additionally,a large number of candidate genes and SNPs linked to climatic adaptation were mapped.These findings could inform sustainable pest management strategies in the face of climate change,aiding future pest forecasting and management planning.展开更多
基金National Natural Science Foundation of China(No.60576025)Tianjin Science and Technology Development Program (No.06YFGZGX03400)
文摘An adaptive ramp generator based on linear histogram was proposed for the built-in selftest (BIST) of analog to digital convertor (ADC) in CMOS image sensor. By comparing the generated ramp signal to a reference voltage and feeding back a calibration signal, the slope adjustment was implemented, and high linearity and precision of ramp slope were realized. By modulating the pulse width and reference voltage, sweep length varied from microsecond to second and signal swing could reach 3 V with 5.6 mW power consumption. The ramp was used as input to an ideal 10-bit single-slope ADC, and the corresponding DNL and INL were 0.032 LSB and 0.078 LSB, re-spectively.
文摘An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapter board technology.Four layers of high-resistance silicon substrate stack packaging are implemented based on the wafer-level gold-gold bonding process.Each layer adopts though silicon via(TSV)technology to realize signal interconnection.A core monolithic integrated microwave chip(MMIC)is embedded in the silicon cavity,and the silicon-based filter is integrated with the high-resistance silicon substrate.The interconnect line,cavity and filter of the silicon-based adapter board are designed with AutoCAD,and HFSS is adopted for 3D electromagnetic field simulation.According to the measured results,the radio frequency(RF)of the mixing multi-function chip is 40-44 GHz and its intermediate frequency(IF)can cover the Ku band with a chip size of 10 mm×11 mm×1 mm.The multiplier multi-function chip operates at 16-20 GHz.The fundamental suppression is greater than 50 dB and the second harmonic suppression is better than 40 dB with a chip size of 8 mm×8 mm×1 mm.The cascaded fully assembled mixing component achieves a spur of better than-50 dBc and a gain of better than 15 dB.
文摘To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separation process, considering elastic forces of separating springs, hydrodynamic forces, gravity and buoyancy. Moreover, a criterion based on the maximum separating distance is put forward to determine whether adapters separate with the missile reliably. The results show that the magnitude and position of elastic force, the wedge angle and mass of the adapter significantly affect the separating process. The local sensitivity analysis for the reference status of design parameters demonstrates that the wedge angle of adapters has the maximum influence about 70. 4% on the separating distance.
基金Funding for this work was provided in part by the National Science Foundation through a subaward from the NEES Consortium,Inc.under Cooperative Agreement CMS0402490.The authors appreciate the assistance of Dr.Frank McKenna of the University of California,Berkeley,Dr.John Hallquist of Livermore Software Technology Corporation,and Prof.Yoshikazu Takahashi of Kyoto University.The findings and conclusions are those of the authors alone,and may not reflect those of the sponsors.
文摘This paper describes a versatile and computationally efficient method for coupling several finite element analysis(FEA)programs together so that the unique modeling and analysis capabilities of each code can be utilized simultaneously to simulate the static or dynamic response of a complete numerical system.An arbitrary number of finite element analysis software packages can be coupled by adding two special types of elements,namely generic and adapter elements,to each of the finite element applications using their programming interface.These elements are inserted at the interfaces between the different sub-domains of the complete system modeled by each finite element analysis software package.Exchange of data between the coupled FEA codes is accomplished in a modular and synchronized manner using OpenFresco(Opensource Framework for Experimental Setup and Control).OpenFresco is an objectoriented,environment independent software framework initially developed for hybrid simulation in which certain aspects of a complete structure are simulated numerically and other aspects are simultaneously tested physically.An important practical advantage of this coupled analysis approach is that all of the connected FEA codes run concurrently and continuously,decreasing analysis time consumption by an order of magnitude or more compared to more traditional approaches that shut down and restart the coupled analysis codes at each integration time step.The implementation and accuracy of this approach to FE software coupling are demonstrated using dynamic analyses of three simple structural models from the field of earthquake engineering.
文摘High power lasers (> +21dBm) have gradually become the common solution for signal transmitting systems including regional cable television, Fiber To The Home (FTTH), and gigabit passive optical networks (G- PONs) due to their ability to generate signals that can be transmitted over long distances. However, if protective design is not implemented in the facility at the client side, users may be exposed to health hazards such as eye damage from these high-power lasers. High-power optical adapters with laser shutter use metal masks to prevent eye exposure to direct laser beams. They have progressively replaced conventional optical adapters and entered the market mainstream. Our study uses the Elastic-Plastic theory together with parametric design to investigate the effect of geometry on the initial spring-back angle of a laser shutter. Once the force stabilizes, the angles of the initial spring back are found to be the same as the simulated results for several attempts. In our study, it is observed that factors including the thickness of the metal masking plate, the initial design angle, the stiffness of the material and the boundary conditions have significant influence on the spring back angle. These can be used as references in design control.
文摘目的探讨在急性缺血性脑卒中患者中应用直接抽吸一次性取栓(A direct aspiration First-Pass thrombectomy,ADAPT)进行血管再通的安全性、可行性及技术优势。方法回顾性分析本院神经内科2021年3月至2023年10月接受血管再通术治疗的54例急性脑卒中患者。根据取栓技术的不同,患者被分为研究组(应用ADAPT技术直接抽吸取栓,34例)和对照组[应用Solitaire FR支架机械取栓术(Solitaire FR with intracranial support catheter for mechanical thrombectomy,SWIM),20例]。比较两组的取栓次数、手术操作时间、血管完全再通率、术前与术后2周美国国立卫生研究院卒中量表(National institutes of health stroke scale,NIHSS)评分、并发症发生率及术后3个月良好预后率。结果两组采用不同取栓技术后,研究组的取栓次数和手术操作时间均低于对照组(P<0.05)。术前两组的NIHSS评分差异无统计学意义(P>0.05)。术后2周,研究组的NIHSS评分显著低于对照组(P<0.05)。两组的血管完全再通率分别为70.59%和75.00%,术后3个月良好预后率分别为64.71%和60.00%,两组间差异无统计学意义(P>0.05)。研究组的并发症发生率(8.82%)显著低于对照组(20.00%)(P<0.05)。结论与SWIM取栓技术相比,ADAPT技术在血管再通率上无显著差异,但能显著减少急性脑卒中患者的取栓次数和手术操作时间,提升术后3个月的良好预后率,改善术后2周的NIHSS评分,并降低并发症发生率。ADAPT技术在改善患者功能恢复和降低并发症方面显示了更大的潜力,为急性缺血性脑卒中的临床治疗提供了有力的替代方案。
文摘ACE(Adaptive Communication Environment)是用于开发高性能网络化应用与下一代中间件的面向对象框架。除了许多专用于开发网络通信软件的设计模式(比如 Reactor、Proactor、Half-Sync/Half-Async,等等),ACE还对GoF的Design Patten一书中的许多设计模式作了大量应用。
文摘This paper introduces the choices of the technology solutions pertinent to the industrial standard of Chinese communications industry, YD/T 1591 Technical Requirements and Test Method of Charger and lnterface for Mobile Telecommunication Terminal Equipment, as well as its development and revision process. It also elaborates the technology contents for Recommendation of Improving the Standard ITU-TL.1000.
文摘In order to improve the system reliability and performance and to reduce the system cost, volume and weight, we have designed, fabricated and tested the multibus adapter system of a trimodular redundant fault tolerant computer system on a single chip of 5000 gate CMOS gate array. The design, fabrication and test of this single chip system will be discussed..
基金the National Key Research and Development Program of China(2021YFA0717900)National Natural Science Foundation of China(62471251,62405144,62288102,22275098,and 62174089)+1 种基金Basic Research Program of Jiangsu(BK20240033,BK20243057)Jiangsu Funding Program for Excellent Postdoctoral Talent(2022ZB402).
文摘Recently,for developing neuromorphic visual systems,adaptive optoelectronic devices become one of the main research directions and attract extensive focus to achieve optoelectronic transistors with high performances and flexible func-tionalities.In this review,based on a description of the biological adaptive functions that are favorable for dynamically perceiv-ing,filtering,and processing information in the varying environment,we summarize the representative strategies for achiev-ing these adaptabilities in optoelectronic transistors,including the adaptation for detecting information,adaptive synaptic weight change,and history-dependent plasticity.Moreover,the key points of the corresponding strategies are comprehen-sively discussed.And the applications of these adaptive optoelectronic transistors,including the adaptive color detection,sig-nal filtering,extending the response range of light intensity,and improve learning efficiency,are also illustrated separately.Lastly,the challenges faced in developing adaptive optoelectronic transistor for artificial vision system are discussed.The descrip-tion of biological adaptive functions and the corresponding inspired neuromorphic devices are expected to provide insights for the design and application of next-generation artificial visual systems.
基金funded by the National Natural Science Foundation of China(32372546)Shenzhen Science and Technology Program(KQTD20180411143628272)+1 种基金the Agricultural Science and Technology Innovation Program of Chinese Academy of Agricultural Sciences and STI 2030-Major Projects(2022ZD04021)the National Key Research and Development Program of China(2023YFD2200700)。
文摘Agricultural pests cause enormous losses in annual agricultural production.Understanding the evolutionary responses and adaptive capacity of agricultural pests under climate change is crucial for establishing sustainable and environmentally friendly agricultural pest management.In this study,we integrate climate modeling and landscape genomics to investigate the distributional dynamics of the cotton bollworm(Helicoverpa armigera)in the adaptation to local environments and resilience to future climate change.Notably,the predicted inhabitable areas with higher suitability for the cotton bollworm could be eight times larger in the coming decades.Climate change is one of the factors driving the dynamics of distribution and population differentiation of the cotton bollworm.Approximately 19,000 years ago,the cotton bollworm expanded from its ancestral African population,followed by gradual occupations of the European,Asian,Oceanian,and American continents.Furthermore,we identify seven subpopulations with high dispersal and adaptability which may have an increased risk of invasion potential.Additionally,a large number of candidate genes and SNPs linked to climatic adaptation were mapped.These findings could inform sustainable pest management strategies in the face of climate change,aiding future pest forecasting and management planning.
