To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fract...To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.展开更多
Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hyd...Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.展开更多
Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout a...Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.展开更多
The primary objective of this paper is to investigate the well-posedness theories associated with the discrete nonlinear Schrodinger and Klein-Gordon equations.These theories encompass both local and global well-posed...The primary objective of this paper is to investigate the well-posedness theories associated with the discrete nonlinear Schrodinger and Klein-Gordon equations.These theories encompass both local and global well-posedness,as well as the existence of blowing-up solutions for large and irregular initial data.The main results presented in this paper can be summarized as follows:(1)Discrete Nonlinear Schrodinger Equation:Global well-posedness in l^(p) spaces for all1≤p≤∞,regardless of whether it is in the defocusing or focusing cases.(2)Discrete Klein-Gordon Equation:Local well-posedness in l^(p) spaces for all 1≤p≤∞.Furthermore,in the defocusing case,we establish global well-posedness in l^(p) spaces for any2≤p≤2σ+2(σ>0).In contrast,in the focusing case,we show that solutions with negative energy blow up within a finite time.These conclusions reveal the distinct dynamic behaviors exhibited by the solutions of the equations in discrete settings compared to their continuous setting.Additionally,they illuminate the significant role that discretization plays in preventing ill-posedness,and collapse for the nonlinear Schrodinger equation.展开更多
With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resourc...With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resource constraints(the total resource consumption of the attacks is not greater than a given initial resource of the attacker)to mislead a discrete event system under supervisory control to reach unsafe states.We consider that the attacker can implement two types of attacks:One by modifying the sensor readings observed by a supervisor and the other by enabling the actuator commands disabled by the supervisor.Each attack has its corresponding resource consumption and remains covert.To solve this problem,we first introduce a notion of combined-attackability to determine whether a closedloop system may reach an unsafe state after receiving attacks with resource constraints.We develop an algorithm to construct a corrupted supervisor under attacks,provide a verification method for combined-attackability in polynomial time based on a plant,a corrupted supervisor,and an attacker's initial resource,and propose a corresponding attack synthesis algorithm.The effectiveness of the proposed method is illustrated by an example.展开更多
Image watermarking is a powerful tool for media protection and can provide promising results when combined with other defense mechanisms.Image watermarking can be used to protect the copyright of digital media by embe...Image watermarking is a powerful tool for media protection and can provide promising results when combined with other defense mechanisms.Image watermarking can be used to protect the copyright of digital media by embedding a unique identifier that identifies the owner of the content.Image watermarking can also be used to verify the authenticity of digital media,such as images or videos,by ascertaining the watermark information.In this paper,a mathematical chaos-based image watermarking technique is proposed using discrete wavelet transform(DWT),chaotic map,and Laplacian operator.The DWT can be used to decompose the image into its frequency components,chaos is used to provide extra security defense by encrypting the watermark signal,and the Laplacian operator with optimization is applied to the mid-frequency bands to find the sharp areas in the image.These mid-frequency bands are used to embed the watermarks by modifying the coefficients in these bands.The mid-sub-band maintains the invisible property of the watermark,and chaos combined with the second-order derivative Laplacian is vulnerable to attacks.Comprehensive experiments demonstrate that this approach is effective for common signal processing attacks,i.e.,compression,noise addition,and filtering.Moreover,this approach also maintains image quality through peak signal-to-noise ratio(PSNR)and structural similarity index metrics(SSIM).The highest achieved PSNR and SSIM values are 55.4 dB and 1.In the same way,normalized correlation(NC)values are almost 10%–20%higher than comparative research.These results support assistance in copyright protection in multimedia content.展开更多
Objective This study explored the job choice preferences of Center for Disease Prevention and Control(CDC)workers to provide CDC management information and recommendations for optimizing employee retention and motivat...Objective This study explored the job choice preferences of Center for Disease Prevention and Control(CDC)workers to provide CDC management information and recommendations for optimizing employee retention and motivation policies.Methods A discrete choice experiment was conducted in nine provinces across China.Seven key attributes were identified to analyze the job preferences of CDC workers.Mixed logit models,latent class models,and policy simulation tools were used.Results A valid sample of 5,944 cases was included in the analysis.All seven attributes significantly influenced the job choices of CDC workers.Heterogeneity analyses identified two main groups based on different levels of preference for attribute utility.Income-prioritizers were concerned with income and opportunities for career development,whereas bianzhi-prioritizers were concerned with bianzhi and welfare benefits.The policy simulation analysis revealed that income-prioritizers had a relatively higher sensitivity to multiple job preference incentives.Conclusion Income and bianzhi were the two key attributes influencing the job choices and retention preferences of CDC workers.Heterogeneity in job preferences was also identified.Based on the preference characteristics of different subgroups,policy content should be skewed to differentiate the importance of incentives.展开更多
This paper presents the dynamical properties of a discrete-time prey-predator model with refuge in prey under imprecise biological parameters.We consider the refuge concept of prey,which is proportional to the density...This paper presents the dynamical properties of a discrete-time prey-predator model with refuge in prey under imprecise biological parameters.We consider the refuge concept of prey,which is proportional to the density of prey species with interval parameters.The model develops with natural interval parameters since the uncertainties of parameters of any ecological system are a widespread phenomenon in nature.The equilibria of the model are obtained,and the dynamic behaviours of the proposed system are examined.Simulations of the model are performed for different parameters of the model.Numerical simulations show that the proposed discrete model exhibits rich dynamics of a chaotic and complex nature.Our study,through analytical derivation and numerical example,presents the effect of refuge on population dynamics under imprecise biological parameters.展开更多
The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRE...The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRESP),is an important factor affecting the homogeneity.This study investigated the influence of the size combination and MRESP on the distribution homogeneity of particles in aggregate blend using discrete element method(DEM).An indicator quantifying the distribution homogeneity was established according to the coefficient of variation(CV)for particle number.Two-size,three-size,and four-size aggregate blends with various compositions were designed.Laboratory tests show the DEM simulation is feasible.The particle distribution homogeneity in various blends was analyzed.The results showed the distribution homogeneity of each size particles in a blend is closely related to their mass fraction.The higher the mass fraction of the particles,the more homogeneous the distribution of them.The MRESP has no significant influence on the homogeneity of the blend composed of only coarse aggregates.However,the homogeneity of the blend composed of coarse and fine aggregates improves gradually with the increase of the mass fraction of fine aggregates.The smaller the maximum particle size in a blend,the better the homogeneity.It is suggested that the mass fraction of fine aggregates should be between 33%and 50%for achieving good homogeneity of aggregate blends.The research results can provide a reference for gradation design of asphalt mixture.展开更多
Since the method of discretizing memristors was proposed,discrete memristors(DMs)have become a very important topic in recent years.However,there has been little research on non-autonomous discrete memristors(NDMs)and...Since the method of discretizing memristors was proposed,discrete memristors(DMs)have become a very important topic in recent years.However,there has been little research on non-autonomous discrete memristors(NDMs)and their applications.Therefore,in this paper,a new NDM is constructed,and a non-autonomous hyperchaotic map is proposed by connecting this non-autonomous memristor in parallel with an autonomous memristor.This map exhibits complex dynamical behaviors,including infinitely many fixed points,initial-boosted attractors,initial-boosted bifurcations,and the size of the attractors being controlled by the initial value.In addition,a simple pseudo-random number generator(PRNG)was designed using the non-autonomous hyperchaotic map,and the pseudo-random numbers(PRNs)generated by it were tested using the National Institute of Standards and Technology(NIST)SP800-22 test suite.Finally,the non-autonomous hyperchaotic map is implemented on the STM32 hardware experimental platform.展开更多
The mechanical properties of solid oxide fuel cells(SOFCs)can limit their mechanical stability and lifespan.Understanding the correlation between the microstructure and mechanical properties of porous electrode is ess...The mechanical properties of solid oxide fuel cells(SOFCs)can limit their mechanical stability and lifespan.Understanding the correlation between the microstructure and mechanical properties of porous electrode is essential for enhancing the performance and durability of SOFCs.Accurate prediction of mechanical properties of porous electrode can be achieved by microscale finite element modeling based on three-dimensional(3D)microstructures,which requires expensive 3D tomography techniques and massive computational resources.In this study,we proposed a cost-effective alternative approach to access the mechanical properties of porous electrodes,with the elastic properties of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δc)athode serving as a case study.Firstly,a stochastic modeling was used to reconstruct 3D microstructures from two-dimensional(2D)cross-sections as an alternative to expensive tomography.Then,the discrete element method(DEM)was used to predict the elastic properties of porous ceramics based on the discretized 3D microstructures reconstructed by stochastic modeling.Based on 2D microstructure and the elastic properties calculated by the DEM modeling of the 3D reconstructed porous microstructures,a convolutional neural network(CNN)based deep learning model was built to predict the elastic properties rapidly from 2D microstructures.The proposed combined framework can be implemented with limited computational resources and provide a basis for rapid prediction of mechanical properties and parameter estimation for multiscale modeling of SOFCs.展开更多
Shield tunnel,composed of several segments,is widely used in urban underground engineering.When the tunnel is under load,relative displacement occurs between adjacent segments.In the past,distributed optical fiber sen...Shield tunnel,composed of several segments,is widely used in urban underground engineering.When the tunnel is under load,relative displacement occurs between adjacent segments.In the past,distributed optical fiber sensing technology was used to perform strain monitoring,but there is an urgent need to determine how to transform strain into displacement.In this study,optical frequency domain reflectometry was applied in laboratory tests.Aiming at the shear process and center settlement process of shield tunnel segments,two kinds of quantitative calculation methods were put forward to carry out a quantitative analysis.Meanwhile,the laboratory test process was simulated numerically utilizing the discrete element numerical analysis method.Optical fiber,an atypical geotechnical material,was innovatively applied for discrete element modeling and numerical simulation.The results show that the measured displacement of the dial gauge,the calculated results of the numerical model,and the displacement quantitatively calculated from the optical fiber data agree with each other in general.The latter two methods can potentially be utilized in engineering application of deformation monitoring at shield tunnel joints,but need to be further calibrated and adjusted in detail.展开更多
The nonlinear dynamic characteristics of a two-peak discrete chaotic system are studied.Through the study of the nonlinear dy‐namic behavior of the system,it is found that with the change of the system parameters,the...The nonlinear dynamic characteristics of a two-peak discrete chaotic system are studied.Through the study of the nonlinear dy‐namic behavior of the system,it is found that with the change of the system parameters,the system starts from a chaotic state,and then goes through intermittent chaos,stable region,period-doubling bifurcation to a chaotic state again.The systems critical conditions and pro‐cess to generate intermittent chaos are analyzed.The feedback control method sets linear and nonlinear controllers for the system to control the chaos.By adjusting the value of control parameters,the intermittent chaos can be delayed or disappear,and the stability region and period-doubling bifurcation process of the system can be expanded.Both linear controllers and nonlinear controllers have the same control effect.The numerical simulation analysis verifies the correctness of the theoretical analysis.展开更多
The flexible satellite batch production line is a complex discrete production system with multiple cross-disciplinary fields and mixed serial parallel tasks.As the source of the satellite batch production line process...The flexible satellite batch production line is a complex discrete production system with multiple cross-disciplinary fields and mixed serial parallel tasks.As the source of the satellite batch production line process,the warehousing system has urgent needs such as uncertain production scale and rapid iteration and optimization of business processes.Therefore,the requirements and architecture of complex discrete warehousing systems such as flexible satellite batch production lines are studied.The physical system of intelligent equipment is abstracted as a digital model to form the underlying module,and a digital fusion framework of“business domain+middleware platform+intelligent equipment information model”is constructed.The granularity of microservice splitting is calculated based on the dynamic correlation relationship between user access instances and database table structures.The general warehousing functions of the platform are divided to achieve module customization,addition,and configuration.An open discrete warehousing system based on microservices is designed.Software architecture and design develop complex discrete warehousing systems based on the SpringCloud framework.This architecture achieves the decoupling of business logic and physical hardware,enhances the maintainability and scalability of the system,and greatly improves the system’s adaptability to different complex discrete warehousing business scenarios.展开更多
Hydraulic fracturing,an effective method for enhancing coal seam productivity,largely determines coalbed methane(CBM)production,which is significantly influenced by geological and engineering factors.This study focuse...Hydraulic fracturing,an effective method for enhancing coal seam productivity,largely determines coalbed methane(CBM)production,which is significantly influenced by geological and engineering factors.This study focuses on the L block to investigate the mechanisms influencing efficient fracture propagation and enhanced stimulated reservoir volume(SRV)in fracturing.To explore the mechanisms influencing effective fracture propagation and enhanced SRV,the L block was selected as the research object,with a comprehensive consideration of geological background,reservoir properties,and dynamic production data.By combining the discrete lattice method with numer-ical analysis and true triaxial experimental simulation,the fracture morphology of a single cluster and the propagation patterns of multiple clusters of complex fractures were obtained.Additionally,the optimization of temporary plugging timing and the fracture map under multiple factors were innovatively proposed.Results indicate that greater flow rate and viscosity can effectively overcome the stress shadow effect of the outermost fractures(1st and 6th clusters),increasing the fracture pressure of the single cluster and the equilibrium degree of multiple fracture propagation,thus forming a more complex fracture network.Moreover,when viscosity exceeds 45 pressure concentrates at fracture mPa⋅s,tips,promoting discontinuous propagation and reducing flow resistance.Conversely,increased gangue thickness and spacing between horizontal wells increase the vertical propagation pressure,suppressing fracture growth and reducing central flow velocity.This study provides a multi-cluster fracture propagation map for optimizing volumetric fracturing in coal seams and suggests that the optimal temporary plugging time significantly enhances the SRV.展开更多
Objective:To investigate the preference characteristics and relative importance of each core factor in the teaching program for undergraduate nursing students during clinical practice,and to provide empirical support ...Objective:To investigate the preference characteristics and relative importance of each core factor in the teaching program for undergraduate nursing students during clinical practice,and to provide empirical support for the creation of a student-centered,formalized clinical teaching system that meets the actual needs of nursing students.Methods:The quantitative research method of discrete choice experiment was adopted,and the questionnaire was designed based on the random utility theory.Through a systematic literature review,semi-structured interviews,and two rounds of Delphi expert consultations,six core attributes of the instructor,namely educational qualifications,teaching methods,frequency of individualized guidance,operational practice opportunities,feedback timeliness,and instructor title,and their corresponding levels were determined.The study period was from January 2024 to January 2025,and 158 undergraduate nursing students who chose to intern at Deyang People’s Hospital were selected as the research subjects.A survey tool with 12 choice sets was created using Ngene software,and then statistical analysis was performed on the obtained data using the conditional Logit model to measure the impact of each attribute on the choice behavior of nursing students.Results:The results showed that the conditional Logit model fitted well(likelihood ratio chi-square=85.32,p<0.001).The analysis results indicated that the most important teaching attributes for undergraduate nursing students were,in order:the academic qualifications of the teaching instructor(master vs.Junior college,β=0.42,p<0.01),individualized guidance frequency(daily vs.Weekly,β=0.38,p<0.01),operational practice opportunities(more vs.less,β=0.31,p<0.05),and the timeliness of feedback(timely versus delayed,β=0.29,p<0.05).The influence of the title of the instructor was not statistically significant(p>0.05).Conclusion:Undergraduate nursing students show a clear and systematic preference structure for clinical teaching,with a high expectation of frequent personalized guidance from highly educated teachers,as well as sufficient operational opportunities and timely teaching feedback.展开更多
Signal filtering and differential acquisition are classic yet challenging issues in control engineering.The discrete-time optimal control(DTOC)based on classic tracking differentiator(TD)can effectively extract differ...Signal filtering and differential acquisition are classic yet challenging issues in control engineering.The discrete-time optimal control(DTOC)based on classic tracking differentiator(TD)can effectively extract differentiation signals and filter signals,while eliminating the chattering problem that arises during the discretization of the continuous solution.However,under external disturbance,the convergence mode may change,leading to overshoot and noise amplification.In this paper,a dual-switching strategy is proposed,which can alternate between the base double-integral system and its dual system according to the quadrant of the system’s state.And a novel linearized control law is also introduced,deriving a novel dual-switch tracking differentiator.Further analysis of system convergence and time optimality is provided.Simulation results show that the application of this dual-switching strategy notably reduces overshoot in both tracking and differential signals while enhancing noise filtering performance.Moreover,experiments conducted on a permanent magnet synchronous motor(PMSM)platform,where the proposed TD acts as a filter in the speed feedback loop,demonstrate that the standard deviation between the reference speed and the target speed(at a constant speed of 378 r/min)decreased from 5.63 r/min to 4.93 r/min,compared to the moving average algorithm.展开更多
Utilizing the Discrete Element Method,this research studied the stiffness distribution of gap-graded soils by modifying the conventional static method.By acknowledging the inherent particle property disparity between ...Utilizing the Discrete Element Method,this research studied the stiffness distribution of gap-graded soils by modifying the conventional static method.By acknowledging the inherent particle property disparity between coarser and finer particles,this research differentiates the stiffness distribution of gap-graded soils from the perspective of contact and particle types.Results indicate that particle property disparity significantly influence the small-strain stiffness characteristics,consequently altering the overall stiffness distribution in gap-graded soil specimens.Specifically,with the equivalent coarser particle property,an increase in particle Young's modulus of finer particles results in an augmentation of small-strain stiffness values,alongside an increased stiffness distribution contribution from finer particles.Nevertheless,this study reveals that even with a higher particle Young's modulus of finer particles,the proportion of small-strain stiffness transferred by finer particles remains consistently lower than their volume fraction.Furthermore,the proportion of stiffness transferred by finer particles may fall below their contribution to stress transmission.This investigation accentuates the subtle yet significant effects of particle property variations on small strain stiffness and its subsequent distribution,providing a foundation for advancing the significance of particle property disparities in evaluating soil responses.展开更多
The glutenite reservoir is strongly heterogeneous due to the random distribution of gravels, making it challenging to perform hydraulic fracturing effectively. To solve this issue, it is essential to study interaction...The glutenite reservoir is strongly heterogeneous due to the random distribution of gravels, making it challenging to perform hydraulic fracturing effectively. To solve this issue, it is essential to study interaction behavior between hydraulic fractures(HFs) and gravels. A coupled hydro-mechanical model is proposed for HF propagation in glutenite using a grain-based discrete element method. This paper first investigates the dynamic evolution of HFs in glutenite, then analyzes the influences of various factors such as horizontal stress difference(Δσ), minimum horizontal stress(σh), gravel content(Vg), gravel size(dg), and stiffness ratio of gravel to matrix(Rs) on HF propagation geometries. Results show that penetrating the gravel is the primary HF-gravel interaction behavior, which follows sequential and staggered initiation modes. Bypassing the gravel is the secondary behavior, which obeys the sequential initiation mode and occurs when the orientation of the gravel boundary is inclined to the maximum horizontal stress(σH). An offset along the gravel boundary is usually formed while penetrating gravels, and the offsets may cause fracture widths to decrease by 37.8%-84.4%. Even if stress dominates the direction of HF propagation, HFs still tend to deflect within gravels. The deviation angle from σH decreases with rising Δσand increases with the increase of dgand Rs. Additionally, intra-gravel shear HFs(IGS-HFs) are prone to be generated in coarse-grained glutenite under high Δσ, while more gravel-bypassing shear HFs(GBSHFs) tend to be created in argillaceous glutenite with high Rsthan in sandy glutenite with low Rs. The findings above prompt the emergence of a novel HF propagation pattern in glutenite, which helps to understand the real HF geometries and to provide theoretical guidance for treatments in the field.展开更多
The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under resho...The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under reshock impact is investigated using a two-component discrete Boltzmann method.The hydrodynamic and thermodynamic characteristics of the fluid system are comprehensively analyzed from the perspectives of the density gradient,vorticity,kinetic energy,mixing degree,mixing width and non-equilibrium intensity.Simulation results indicate that for longer relaxation time,the diffusion and dissipation are enhanced,the physical gradients decrease,and the growth of the interface is suppressed.Furthermore,the non-equilibrium manifestations show complex patterns,driven by the competitive physical mechanisms of the diffusion,dissipation,shock wave,rarefaction wave,transverse wave and fluid instabilities.These findings provide valuable insight into the fundamental mechanism of compressible fluid flows.展开更多
基金funded by the project of the Major Scientific and Technological Projects of CNOOC in the 14th Five-Year Plan(No.KJGG2022-0701)the CNOOC Research Institute(No.2020PFS-03).
文摘To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.
基金Australian Research Council Linkage Program(LP200301404)for sponsoring this researchthe financial support provided by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology,SKLGP2021K002)National Natural Science Foundation of China(52374101,32111530138).
文摘Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.
基金supported by National Natural Science Foundation of China(Grant Nos.52074312 and 52211530097)CNPC Science and Technology Innovation Foundation(Grant No.2021DQ02-0505).
文摘Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.
基金in part supported by the NSFC(12171356,12494544)supported by the National Key R&D Program of China(2020 YFA0713300)+1 种基金the NSFC(12531006)the Nankai Zhide Foundation。
文摘The primary objective of this paper is to investigate the well-posedness theories associated with the discrete nonlinear Schrodinger and Klein-Gordon equations.These theories encompass both local and global well-posedness,as well as the existence of blowing-up solutions for large and irregular initial data.The main results presented in this paper can be summarized as follows:(1)Discrete Nonlinear Schrodinger Equation:Global well-posedness in l^(p) spaces for all1≤p≤∞,regardless of whether it is in the defocusing or focusing cases.(2)Discrete Klein-Gordon Equation:Local well-posedness in l^(p) spaces for all 1≤p≤∞.Furthermore,in the defocusing case,we establish global well-posedness in l^(p) spaces for any2≤p≤2σ+2(σ>0).In contrast,in the focusing case,we show that solutions with negative energy blow up within a finite time.These conclusions reveal the distinct dynamic behaviors exhibited by the solutions of the equations in discrete settings compared to their continuous setting.Additionally,they illuminate the significant role that discretization plays in preventing ill-posedness,and collapse for the nonlinear Schrodinger equation.
基金partially supported by the Science Technology Development Fund,Macao Special Administrative Region(0029/2023/RIA1)the National Research Foundation Singapore under its AI Singapore Programme(AISG2-GC-2023-007)
文摘With the development of cyber-physical systems,system security faces more risks from cyber-attacks.In this work,we study the problem that an external attacker implements covert sensor and actuator attacks with resource constraints(the total resource consumption of the attacks is not greater than a given initial resource of the attacker)to mislead a discrete event system under supervisory control to reach unsafe states.We consider that the attacker can implement two types of attacks:One by modifying the sensor readings observed by a supervisor and the other by enabling the actuator commands disabled by the supervisor.Each attack has its corresponding resource consumption and remains covert.To solve this problem,we first introduce a notion of combined-attackability to determine whether a closedloop system may reach an unsafe state after receiving attacks with resource constraints.We develop an algorithm to construct a corrupted supervisor under attacks,provide a verification method for combined-attackability in polynomial time based on a plant,a corrupted supervisor,and an attacker's initial resource,and propose a corresponding attack synthesis algorithm.The effectiveness of the proposed method is illustrated by an example.
基金supported by the researcher supporting Project number(RSPD2025R636),King Saud University,Riyadh,Saudi Arabia.
文摘Image watermarking is a powerful tool for media protection and can provide promising results when combined with other defense mechanisms.Image watermarking can be used to protect the copyright of digital media by embedding a unique identifier that identifies the owner of the content.Image watermarking can also be used to verify the authenticity of digital media,such as images or videos,by ascertaining the watermark information.In this paper,a mathematical chaos-based image watermarking technique is proposed using discrete wavelet transform(DWT),chaotic map,and Laplacian operator.The DWT can be used to decompose the image into its frequency components,chaos is used to provide extra security defense by encrypting the watermark signal,and the Laplacian operator with optimization is applied to the mid-frequency bands to find the sharp areas in the image.These mid-frequency bands are used to embed the watermarks by modifying the coefficients in these bands.The mid-sub-band maintains the invisible property of the watermark,and chaos combined with the second-order derivative Laplacian is vulnerable to attacks.Comprehensive experiments demonstrate that this approach is effective for common signal processing attacks,i.e.,compression,noise addition,and filtering.Moreover,this approach also maintains image quality through peak signal-to-noise ratio(PSNR)and structural similarity index metrics(SSIM).The highest achieved PSNR and SSIM values are 55.4 dB and 1.In the same way,normalized correlation(NC)values are almost 10%–20%higher than comparative research.These results support assistance in copyright protection in multimedia content.
基金supported by the Major Program of the National Social Science Foundation of China(no.2022YFC3600801)the Operation of Public Health Emergency Response Mechanisms of the Chinese Center for Disease Control and Prevention(no.102393220020010000017)。
文摘Objective This study explored the job choice preferences of Center for Disease Prevention and Control(CDC)workers to provide CDC management information and recommendations for optimizing employee retention and motivation policies.Methods A discrete choice experiment was conducted in nine provinces across China.Seven key attributes were identified to analyze the job preferences of CDC workers.Mixed logit models,latent class models,and policy simulation tools were used.Results A valid sample of 5,944 cases was included in the analysis.All seven attributes significantly influenced the job choices of CDC workers.Heterogeneity analyses identified two main groups based on different levels of preference for attribute utility.Income-prioritizers were concerned with income and opportunities for career development,whereas bianzhi-prioritizers were concerned with bianzhi and welfare benefits.The policy simulation analysis revealed that income-prioritizers had a relatively higher sensitivity to multiple job preference incentives.Conclusion Income and bianzhi were the two key attributes influencing the job choices and retention preferences of CDC workers.Heterogeneity in job preferences was also identified.Based on the preference characteristics of different subgroups,policy content should be skewed to differentiate the importance of incentives.
文摘This paper presents the dynamical properties of a discrete-time prey-predator model with refuge in prey under imprecise biological parameters.We consider the refuge concept of prey,which is proportional to the density of prey species with interval parameters.The model develops with natural interval parameters since the uncertainties of parameters of any ecological system are a widespread phenomenon in nature.The equilibria of the model are obtained,and the dynamic behaviours of the proposed system are examined.Simulations of the model are performed for different parameters of the model.Numerical simulations show that the proposed discrete model exhibits rich dynamics of a chaotic and complex nature.Our study,through analytical derivation and numerical example,presents the effect of refuge on population dynamics under imprecise biological parameters.
基金funded by the National Natural Science Foundation of China(No.51978048).
文摘The homogeneity of aggregate blend has a significant influence on the performance of asphalt mixture.The composition of aggregate blend,including the size combination and the mass ratio between each size particles(MRESP),is an important factor affecting the homogeneity.This study investigated the influence of the size combination and MRESP on the distribution homogeneity of particles in aggregate blend using discrete element method(DEM).An indicator quantifying the distribution homogeneity was established according to the coefficient of variation(CV)for particle number.Two-size,three-size,and four-size aggregate blends with various compositions were designed.Laboratory tests show the DEM simulation is feasible.The particle distribution homogeneity in various blends was analyzed.The results showed the distribution homogeneity of each size particles in a blend is closely related to their mass fraction.The higher the mass fraction of the particles,the more homogeneous the distribution of them.The MRESP has no significant influence on the homogeneity of the blend composed of only coarse aggregates.However,the homogeneity of the blend composed of coarse and fine aggregates improves gradually with the increase of the mass fraction of fine aggregates.The smaller the maximum particle size in a blend,the better the homogeneity.It is suggested that the mass fraction of fine aggregates should be between 33%and 50%for achieving good homogeneity of aggregate blends.The research results can provide a reference for gradation design of asphalt mixture.
基金supported by the National Natural Science Foundation of China(Grant No.62071411).
文摘Since the method of discretizing memristors was proposed,discrete memristors(DMs)have become a very important topic in recent years.However,there has been little research on non-autonomous discrete memristors(NDMs)and their applications.Therefore,in this paper,a new NDM is constructed,and a non-autonomous hyperchaotic map is proposed by connecting this non-autonomous memristor in parallel with an autonomous memristor.This map exhibits complex dynamical behaviors,including infinitely many fixed points,initial-boosted attractors,initial-boosted bifurcations,and the size of the attractors being controlled by the initial value.In addition,a simple pseudo-random number generator(PRNG)was designed using the non-autonomous hyperchaotic map,and the pseudo-random numbers(PRNs)generated by it were tested using the National Institute of Standards and Technology(NIST)SP800-22 test suite.Finally,the non-autonomous hyperchaotic map is implemented on the STM32 hardware experimental platform.
基金supported by the National Natural Science Foundation of China(Grant Nos.12172104 and 11932005)the Talent Recruitment Project of Guangdong(2021QN02L892)+3 种基金the Stable Supporting Fund of Shenzhen(GXWD20231130153335002)the Shccig-Qinling Program(SMYJY202300140C)the program of Innovation Team in Universities and Colleges in Guangdong(2021KCXTD006)Development and Reform Commission of Shenzhen(XMHT20220103004).
文摘The mechanical properties of solid oxide fuel cells(SOFCs)can limit their mechanical stability and lifespan.Understanding the correlation between the microstructure and mechanical properties of porous electrode is essential for enhancing the performance and durability of SOFCs.Accurate prediction of mechanical properties of porous electrode can be achieved by microscale finite element modeling based on three-dimensional(3D)microstructures,which requires expensive 3D tomography techniques and massive computational resources.In this study,we proposed a cost-effective alternative approach to access the mechanical properties of porous electrodes,with the elastic properties of La_(0.6)Sr_(0.4)Co_(0.2)Fe_(0.8)O_(3-δc)athode serving as a case study.Firstly,a stochastic modeling was used to reconstruct 3D microstructures from two-dimensional(2D)cross-sections as an alternative to expensive tomography.Then,the discrete element method(DEM)was used to predict the elastic properties of porous ceramics based on the discretized 3D microstructures reconstructed by stochastic modeling.Based on 2D microstructure and the elastic properties calculated by the DEM modeling of the 3D reconstructed porous microstructures,a convolutional neural network(CNN)based deep learning model was built to predict the elastic properties rapidly from 2D microstructures.The proposed combined framework can be implemented with limited computational resources and provide a basis for rapid prediction of mechanical properties and parameter estimation for multiscale modeling of SOFCs.
基金National Natural Science Foundation of China,Grant/Award Numbers:41977218,42222707State Key Laboratory for GeoMechanics and Deep Underground Engineering,Grant/Award Number:SKLGDUEK2117。
文摘Shield tunnel,composed of several segments,is widely used in urban underground engineering.When the tunnel is under load,relative displacement occurs between adjacent segments.In the past,distributed optical fiber sensing technology was used to perform strain monitoring,but there is an urgent need to determine how to transform strain into displacement.In this study,optical frequency domain reflectometry was applied in laboratory tests.Aiming at the shear process and center settlement process of shield tunnel segments,two kinds of quantitative calculation methods were put forward to carry out a quantitative analysis.Meanwhile,the laboratory test process was simulated numerically utilizing the discrete element numerical analysis method.Optical fiber,an atypical geotechnical material,was innovatively applied for discrete element modeling and numerical simulation.The results show that the measured displacement of the dial gauge,the calculated results of the numerical model,and the displacement quantitatively calculated from the optical fiber data agree with each other in general.The latter two methods can potentially be utilized in engineering application of deformation monitoring at shield tunnel joints,but need to be further calibrated and adjusted in detail.
基金Supported by the Guiding Project of Science and Technology Research Plan of Hubei Provincial Department of Education(B2022458)。
文摘The nonlinear dynamic characteristics of a two-peak discrete chaotic system are studied.Through the study of the nonlinear dy‐namic behavior of the system,it is found that with the change of the system parameters,the system starts from a chaotic state,and then goes through intermittent chaos,stable region,period-doubling bifurcation to a chaotic state again.The systems critical conditions and pro‐cess to generate intermittent chaos are analyzed.The feedback control method sets linear and nonlinear controllers for the system to control the chaos.By adjusting the value of control parameters,the intermittent chaos can be delayed or disappear,and the stability region and period-doubling bifurcation process of the system can be expanded.Both linear controllers and nonlinear controllers have the same control effect.The numerical simulation analysis verifies the correctness of the theoretical analysis.
文摘The flexible satellite batch production line is a complex discrete production system with multiple cross-disciplinary fields and mixed serial parallel tasks.As the source of the satellite batch production line process,the warehousing system has urgent needs such as uncertain production scale and rapid iteration and optimization of business processes.Therefore,the requirements and architecture of complex discrete warehousing systems such as flexible satellite batch production lines are studied.The physical system of intelligent equipment is abstracted as a digital model to form the underlying module,and a digital fusion framework of“business domain+middleware platform+intelligent equipment information model”is constructed.The granularity of microservice splitting is calculated based on the dynamic correlation relationship between user access instances and database table structures.The general warehousing functions of the platform are divided to achieve module customization,addition,and configuration.An open discrete warehousing system based on microservices is designed.Software architecture and design develop complex discrete warehousing systems based on the SpringCloud framework.This architecture achieves the decoupling of business logic and physical hardware,enhances the maintainability and scalability of the system,and greatly improves the system’s adaptability to different complex discrete warehousing business scenarios.
基金the project of the State Key Laboratory of Petroleum Resources and Engineering(No.PRE/open-2307)the CNOOC Research Institute(No.2020PFS-03).
文摘Hydraulic fracturing,an effective method for enhancing coal seam productivity,largely determines coalbed methane(CBM)production,which is significantly influenced by geological and engineering factors.This study focuses on the L block to investigate the mechanisms influencing efficient fracture propagation and enhanced stimulated reservoir volume(SRV)in fracturing.To explore the mechanisms influencing effective fracture propagation and enhanced SRV,the L block was selected as the research object,with a comprehensive consideration of geological background,reservoir properties,and dynamic production data.By combining the discrete lattice method with numer-ical analysis and true triaxial experimental simulation,the fracture morphology of a single cluster and the propagation patterns of multiple clusters of complex fractures were obtained.Additionally,the optimization of temporary plugging timing and the fracture map under multiple factors were innovatively proposed.Results indicate that greater flow rate and viscosity can effectively overcome the stress shadow effect of the outermost fractures(1st and 6th clusters),increasing the fracture pressure of the single cluster and the equilibrium degree of multiple fracture propagation,thus forming a more complex fracture network.Moreover,when viscosity exceeds 45 pressure concentrates at fracture mPa⋅s,tips,promoting discontinuous propagation and reducing flow resistance.Conversely,increased gangue thickness and spacing between horizontal wells increase the vertical propagation pressure,suppressing fracture growth and reducing central flow velocity.This study provides a multi-cluster fracture propagation map for optimizing volumetric fracturing in coal seams and suggests that the optimal temporary plugging time significantly enhances the SRV.
基金Teaching Reform Research Project at Southwest Medical University(Project No.:JG2023jdyb034)Humanities and Social Sciences Research Project at Sichuan Vocational College of Nursing(Project No.:2022RWSY45)。
文摘Objective:To investigate the preference characteristics and relative importance of each core factor in the teaching program for undergraduate nursing students during clinical practice,and to provide empirical support for the creation of a student-centered,formalized clinical teaching system that meets the actual needs of nursing students.Methods:The quantitative research method of discrete choice experiment was adopted,and the questionnaire was designed based on the random utility theory.Through a systematic literature review,semi-structured interviews,and two rounds of Delphi expert consultations,six core attributes of the instructor,namely educational qualifications,teaching methods,frequency of individualized guidance,operational practice opportunities,feedback timeliness,and instructor title,and their corresponding levels were determined.The study period was from January 2024 to January 2025,and 158 undergraduate nursing students who chose to intern at Deyang People’s Hospital were selected as the research subjects.A survey tool with 12 choice sets was created using Ngene software,and then statistical analysis was performed on the obtained data using the conditional Logit model to measure the impact of each attribute on the choice behavior of nursing students.Results:The results showed that the conditional Logit model fitted well(likelihood ratio chi-square=85.32,p<0.001).The analysis results indicated that the most important teaching attributes for undergraduate nursing students were,in order:the academic qualifications of the teaching instructor(master vs.Junior college,β=0.42,p<0.01),individualized guidance frequency(daily vs.Weekly,β=0.38,p<0.01),operational practice opportunities(more vs.less,β=0.31,p<0.05),and the timeliness of feedback(timely versus delayed,β=0.29,p<0.05).The influence of the title of the instructor was not statistically significant(p>0.05).Conclusion:Undergraduate nursing students show a clear and systematic preference structure for clinical teaching,with a high expectation of frequent personalized guidance from highly educated teachers,as well as sufficient operational opportunities and timely teaching feedback.
基金Project(QZKFKT2023-012)supported by the State Key Laboratory of Heavy-duty and Express High-power Electric Locomotive,China。
文摘Signal filtering and differential acquisition are classic yet challenging issues in control engineering.The discrete-time optimal control(DTOC)based on classic tracking differentiator(TD)can effectively extract differentiation signals and filter signals,while eliminating the chattering problem that arises during the discretization of the continuous solution.However,under external disturbance,the convergence mode may change,leading to overshoot and noise amplification.In this paper,a dual-switching strategy is proposed,which can alternate between the base double-integral system and its dual system according to the quadrant of the system’s state.And a novel linearized control law is also introduced,deriving a novel dual-switch tracking differentiator.Further analysis of system convergence and time optimality is provided.Simulation results show that the application of this dual-switching strategy notably reduces overshoot in both tracking and differential signals while enhancing noise filtering performance.Moreover,experiments conducted on a permanent magnet synchronous motor(PMSM)platform,where the proposed TD acts as a filter in the speed feedback loop,demonstrate that the standard deviation between the reference speed and the target speed(at a constant speed of 378 r/min)decreased from 5.63 r/min to 4.93 r/min,compared to the moving average algorithm.
基金Financial supports from the PolyU Distinguished Postdoctoral Fellowship Scheme are highly appreciatedsupported by the National Natural Science Foundation of China (Grant No.52201008)the Fundamental Research Funds for the Central Universities,the State Key Laboratory of Particle Detection and Electronics (Grant No.SKLPDE-KF-202311).
文摘Utilizing the Discrete Element Method,this research studied the stiffness distribution of gap-graded soils by modifying the conventional static method.By acknowledging the inherent particle property disparity between coarser and finer particles,this research differentiates the stiffness distribution of gap-graded soils from the perspective of contact and particle types.Results indicate that particle property disparity significantly influence the small-strain stiffness characteristics,consequently altering the overall stiffness distribution in gap-graded soil specimens.Specifically,with the equivalent coarser particle property,an increase in particle Young's modulus of finer particles results in an augmentation of small-strain stiffness values,alongside an increased stiffness distribution contribution from finer particles.Nevertheless,this study reveals that even with a higher particle Young's modulus of finer particles,the proportion of small-strain stiffness transferred by finer particles remains consistently lower than their volume fraction.Furthermore,the proportion of stiffness transferred by finer particles may fall below their contribution to stress transmission.This investigation accentuates the subtle yet significant effects of particle property variations on small strain stiffness and its subsequent distribution,providing a foundation for advancing the significance of particle property disparities in evaluating soil responses.
基金supported by the National Natural Science Foundation of China(Grant No.52304003)the Natural Science Foundation of Sichuan Province(Grant No.2024NSFSC0961)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230090).
文摘The glutenite reservoir is strongly heterogeneous due to the random distribution of gravels, making it challenging to perform hydraulic fracturing effectively. To solve this issue, it is essential to study interaction behavior between hydraulic fractures(HFs) and gravels. A coupled hydro-mechanical model is proposed for HF propagation in glutenite using a grain-based discrete element method. This paper first investigates the dynamic evolution of HFs in glutenite, then analyzes the influences of various factors such as horizontal stress difference(Δσ), minimum horizontal stress(σh), gravel content(Vg), gravel size(dg), and stiffness ratio of gravel to matrix(Rs) on HF propagation geometries. Results show that penetrating the gravel is the primary HF-gravel interaction behavior, which follows sequential and staggered initiation modes. Bypassing the gravel is the secondary behavior, which obeys the sequential initiation mode and occurs when the orientation of the gravel boundary is inclined to the maximum horizontal stress(σH). An offset along the gravel boundary is usually formed while penetrating gravels, and the offsets may cause fracture widths to decrease by 37.8%-84.4%. Even if stress dominates the direction of HF propagation, HFs still tend to deflect within gravels. The deviation angle from σH decreases with rising Δσand increases with the increase of dgand Rs. Additionally, intra-gravel shear HFs(IGS-HFs) are prone to be generated in coarse-grained glutenite under high Δσ, while more gravel-bypassing shear HFs(GBSHFs) tend to be created in argillaceous glutenite with high Rsthan in sandy glutenite with low Rs. The findings above prompt the emergence of a novel HF propagation pattern in glutenite, which helps to understand the real HF geometries and to provide theoretical guidance for treatments in the field.
基金supported by the National Natural Science Foundation of China(Grant No.U2242214)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2024A1515010927)+3 种基金the Humanities and Social Science Foundation of the Ministry of Education in China(Grant No.24YJCZH163)the Fujian Provincial Units Special Funds for Education and Research(Grant No.2022639)Fundamental Research Funds for the Central Universities,Sun Yatsen University(Grant No.24qnpy044)partly supported by the Open Research Fund of Key Laboratory of Analytical Mathematics and Applications(Fujian Normal University),Ministry of Education,P.R.China(Grant No.JAM2405)。
文摘The Richtmyer–Meshkov(RM)instability plays an important role in various natural and engineering fields such as inertial confinement fusion.In this study,the effect of relaxation time on the RM instability under reshock impact is investigated using a two-component discrete Boltzmann method.The hydrodynamic and thermodynamic characteristics of the fluid system are comprehensively analyzed from the perspectives of the density gradient,vorticity,kinetic energy,mixing degree,mixing width and non-equilibrium intensity.Simulation results indicate that for longer relaxation time,the diffusion and dissipation are enhanced,the physical gradients decrease,and the growth of the interface is suppressed.Furthermore,the non-equilibrium manifestations show complex patterns,driven by the competitive physical mechanisms of the diffusion,dissipation,shock wave,rarefaction wave,transverse wave and fluid instabilities.These findings provide valuable insight into the fundamental mechanism of compressible fluid flows.
