The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method...The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method can improve the self-assembly phenomenon of Herpetospermum caudigerum Wall.,and the SAN exhibited uniform particle size and demonstrated good stability.In this paper,we analyzed the interactions between the main active compound,herpetrione(Her),and its main carrier,Herpetospermum caudigerum Wall.polysaccharide(HCWP),along with their self-assembly mechanisms under different p H values.The binding constants of Her and HCWP increase with rising p H,leading to the formation of Her-HCWP SAN with a smaller particle size,higher zeta potential,and improved thermal stability.While the contributions of hydrogen bonding and electrostatic attraction to the formation of Her-HCWP SAN increase with rising p H,the hydrophobic force consistently plays a dominant role.This study enhances our scientific understanding of the self-assembly phenomenon of TCM improved by p H driven method.展开更多
Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs hav...Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs have shown to be promising in small-area devices(≤1 cm^(2)),their application in larger areas has been limited by a lack of knowledge regarding alternative deposition methods beyond the common spin-coating approach.Here,we compare spin-coating and upscalable methods such as thermal evaporation and spray-coating for[2-(9H-carbazol-9-yl)ethyl]phosphonic acid(2PACz),one of the most common carbazole-based SAMs.The impact of these deposition methods on the device performance is investigated,revealing that the spray-coating technique yields higher device performance.Furthermore,our work provides guidelines for the deposition of SAM materials for the fabrication of perovskite solar modules.In addition,we provide an extensive characterization of 2PACz films focusing on thermal evaporation and spray-coating methods,which allow for thicker 2PACz deposition.It is found that the optimal 2PACz deposition conditions corresponding to the highest device performances do not always correlate with the monolayer characteristics.展开更多
The NiOx,due to its excellent semiconductor properties,ease of large-area deposition,and tunable optoelectronic characteristics,shows great potential in industrial large-area perovskite technologies.However,NiO_(x)-ba...The NiOx,due to its excellent semiconductor properties,ease of large-area deposition,and tunable optoelectronic characteristics,shows great potential in industrial large-area perovskite technologies.However,NiO_(x)-based perovskite solar cells(PSCs)are limited by interfacial photocatalytic chemical reactions and energy level mismatch.Thus,phosphate-based self-assembled monolayers(SAMs)have been widely developed for delicate interfacial modification;however,they suffer from severe issues such as self-aggregation and high cost.Herein,a low-cost carboxylate-based SAM(pyrenebutyric acid,PyBA)was used to modify NiO_(x),achieving an improved surface chemical environment and interfacial properties,such as an increased Ni^(3+)/Ni2^(+)ratio,a reduced proportion of high-valence Ni^(≥3+),and better-aligned hole transport interface energy level.The introduction of PyBA also results in larger grain size,higher uniformity,and enhanced photoluminescence(PL)from the bottom of the perovskite,yielding a significant increase in efficiency from an initial 22.48%to 25.14%,while increasing the open-circuit voltage(VOC)from 1.077 to 1.192 V.Additionally,a perovskite module with an aperture area of 21 cm^(2)achieved an efficiency of 22.28%,demonstrating the excellent scalability of the PyBA treatment.Moreover,the well-modified buried interface combined with the chemical inertness and structural rigidity of pyrene ensures excellent ultraviolet(UV)stability(the target module maintained 92%of the initial efficiency after 200 h and the control device only retained 40%).展开更多
A new type of amphiphiles bearingmacrocycle such as cucurbit[7]uril(CB[7])spontaneously forms a nanomaterial in water,specifically vesicles(tACB[7]vesicles)with a positive surface charge,verified through various analy...A new type of amphiphiles bearingmacrocycle such as cucurbit[7]uril(CB[7])spontaneously forms a nanomaterial in water,specifically vesicles(tACB[7]vesicles)with a positive surface charge,verified through various analytical techniques including TIRF,DLS and TEM.Functional validation not only reveals the accessibility of the CB[7]portal on these vesicles allowing CB[7]-based host-vip interactions with various functional vip molecules such as fluorescein isothiocyanate conjugated adamantylammonium and spermine(FITC-AdA and FITC-SPM,respectively)using confocal laser scanning microscopy,but also showcases the effective internalization of tACB[7]vesicles into cancer cells with the anticancer drug oxaliplatin(OxPt),as a vip to CB[7],through in vitro cell experiments.Hence,this study provides a blueprint to impart amphiphilic properties to CB[7]through synthetic design and highlights the potential of CB[7]derivatives as a new class of unconventional amphiphiles self-assembling into functional nanomaterials for advanced drug delivery.展开更多
A significant challenge in developing block copolymer photonic crystals is constructing low-symmetric ordered phases,which are essential for achieving a complete photonic band gap.Here,we propose a promising strategy ...A significant challenge in developing block copolymer photonic crystals is constructing low-symmetric ordered phases,which are essential for achieving a complete photonic band gap.Here,we propose a promising strategy to create low-symmetric ordered morphologies by incorporating shape-anisotropic rod-like side chains into block copolymers.Using dissipative particle dynamics simulations,we demonstrate that block copolymers with longer rod-like side chains can self-assemble into a hexagonally packed columnar phase characterized by a low-symmetric rectangular cross-section.Photonic band structure calculations reveal that this low-symmetric columnar phase can exhibit a complete photonic band gap,with the gap size dependent on the aspect ratio of the rectangular cross-sections of the columns.Our findings suggest an effective approach to constructing low-symmetric photonic crystals through the self-assembly of block copolymers with shape-anisotropic segments.展开更多
The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite...The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite bottom interface.While self-assembled monolayers(SAMs)are commonly used for this purpose,the inherent limitations of a single SAM,such as fixed energy levels and rigid structure,restrict their adaptability for different perovskite components and further efficiency enhancement.Here,we demonstrate a stepwise deposition method for SAM-based HTLs to address this issue.We regulated the energy level gradient by depositing two SAMs with distinct energy levels,while the interactions between the phosphate groups in the SAMs and perovskite effectively reduce defect density at the bottom interface of the perovskite film.The as-fabricated PSCs achieved enhanced efficiency and stability with PCEs of 25.7% and 24.0% for rigid and flexible PSCs,respectively;these devices maintain 90% of their initial PCE after 500 h of maximum power point tracking,and retain 98% of their initial PCE after 4,000 bending cycles,representing one of the most stable flexible PSCs reported to date.展开更多
Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivati...Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.展开更多
Spatial confinement of block copolymers can induce frustrations,which can further be utilized to regulate self-assembled structures,thus providing an efficient route for fabricating novel structures.We studied the sel...Spatial confinement of block copolymers can induce frustrations,which can further be utilized to regulate self-assembled structures,thus providing an efficient route for fabricating novel structures.We studied the self-assembly of AB di-block copolymers(di-BCPs)confined in Janus spherical nanocavities using simulations,and explained the structure formation mechanisms.In the case of a strongly selective cavity wall,all the lamella-forming,gyroid-forming,and cylinder-forming di-BCPs can form interfacial frustration-induced Janus concentric perforated lamellar nanoparticles,whose outermost is a Janus spherical shell and the internal is a sphere with concentric perforated lamellar structure.In particular,Janus concentric perforated lamellar nanoparticles with holes distributed only near the equatorial plane were obtained in both lamella-forming and gyroid-forming di-BCPs,directly reflecting the effect of interfacial frustration.The minority-block domain of the cylider-forming di-BCPs may form hemispherical perforated lamellar structures with holes distributed in parallel layers with a specific orientation.For symmetric di-BCPs,both the A and B domains in each nanoparticle are continuous,interchangeable,and have rotational symmetry.While for gyroid-forming and cylinder-forming di-BCPs,only the majority-block domains are continuous in each nanoparticle,and holes in the minority-block domains usually have rotational symmetry.In the case of a weakly selective cavity wall,the inhomogeneity of the cavity wall results in structures having a specific orientation(such as flower-like and branched structures in gyroid-forming and cylinder-forming di-BCPs)and a perforated wetting layer with uniformly distributed holes.The novel nanoparticles obtained may have potential applications in nanotechnology as functional nanostructures or nanoparticles.展开更多
Directly correlating the morphology and composition of interfacial water is vital not only for studying water icing under critical conditions but also for understanding the role of protein–water interac-tions in bio-...Directly correlating the morphology and composition of interfacial water is vital not only for studying water icing under critical conditions but also for understanding the role of protein–water interac-tions in bio-relevant systems.In this study,we present a model system to study two-dimensional(2D)water layers under ambient conditions by using self-assembled monolayers(SAMs)supporting the physisorp-tion of the Cytochrome C(Cyt C)protein layer.We observed that the 2D island-like water layers were uniformly distributed on the SAMs as characterized by atomic force microscopy,and their composition was confirmed by nano-atomic force microscopy-infrared spectroscopy and Raman spectroscopy.In addition,these 2D flakes could grow under high-humidity conditions or melt upon the introduction of a heat source.The formation of these flakes is attributed to the activation energy for water desorption from the Cyt C being nearly twofold high than that from the SAMs.Our results provide a new and effective method for further understanding the water–protein interactions.展开更多
Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in ...Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in selective hole transport.Herein,we synthesize a novel SAM,(4-(3,11-dibro mo-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid(Br-4PADBC),and apply it as a complementary component to the commonly used[2-(3,6-dimeth oxy-9H-carbazol-9-yl)ethyl]phosphonic acid(MeO-2PACz)SAM,accomplishing boosted hole transport in inverted PSCs.A series of characterizations and theoretical calculations are employed to unravel the roles of each components within the binary SAM(bi-SAM).The involvements of the non-planar dibenzo[c,g]carbazole unit and electron-withdrawing Br atoms induce larger dipole moment of Br-4PADBC than MeO-2PACz,resulting in much deeper work function of ITO and consequently improved alignment with the valence band energy level of perovskite.Besides,the introduced Br atoms improve the quality of perovskite crystals and help passivate defects of perovskite.On the other hand,the existence of the conventional MeO-2PACz SAM ensures the considerable conductivity of the bi-SAM and thus efficient hole extraction from the perovskite layer.As a result,inverted PSC devices based on bi-SAM HSL deliver a decent power conversion efficiency(PCE)of 24.52%as well as dramatically improved thermal and operational stabilities.展开更多
Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indiu...Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indium tin oxide(ITO)surface and the desorption of hydroxyl(OH)from the ITO surface induced by polar solvents can lead to the formation of vacancies.Herein,a dimethylacridine-based SAM is incorporated into the perovskite precursor solution.This SAM can be extruded from the precursor solution and enriched on the bottom surface of the perovskite,filling the vacancies and in situ forming a mixed SAM with MeO-2PACz as a hole-selective layer(HSL).The in situ formed mixed SAM optimizes the energy level alignment between the HSL and the perovskite,facilitating hole extraction and alleviating the residual strain of the perovskite film.Consequently,the perovskite solar cells(PSCs),based on the mixed SAM,achieve a power conversion efficiency(PCE)of 25.69%and exhibit excellent operational stability.When this approach is applied to 1.78 eV bandgap PSC devices,it yields a PCE of 20.08%.This work presents a unique strategy for fabricating both high-quality perovskite films and superior buried interfaces,which is also applicable to wide-bandgap PSCs.展开更多
Recently,stimuli-responsive nanocarriers capable of precision drug release have garnered significant attention in the field of drug delivery.Here,an in-situ dynamic covalent self-assembled(DCS)strategy was utilized to...Recently,stimuli-responsive nanocarriers capable of precision drug release have garnered significant attention in the field of drug delivery.Here,an in-situ dynamic covalent self-assembled(DCS)strategy was utilized to develop a co-delivery system.This assembly was based on a thiol-disulfide-exchange reaction,producing disulfide macrocycles in an oxidizing aerial environment.These macrocycles encapsulated the anti-cancer drug(paclitaxel,PTX)on the surface of gold nanoparticles,which served as photothermal therapy agents during the self-assembly.In the DCS process,the kinetic control over the concentration of each building unit within the reaction system led to the formation of a stable co-delivery nanosystem with optimal drug-loading efficiency.Notably,the high glutathione(GSH)concentrations in tumor cells caused the disulfide macrocycles in nanostructures to break,resulting in drug release.The stimuli-responsive performances of the prepared nanosystems were determined by observing the molecular structures and drug release.The results revealed that the self-assembled nanosystem exhibited GSH-triggered drug release and good photothermal conversion capability under near-infrared light.Moreover,the in vitro and in vivo results revealed that conjugating the targeting molecule of cRGD with co-delivery nanosystem enhanced its biocompatibility,chemo-photothermal anti-cancer effect.Overall,our findings indicated that in-situ DCS strategy enhanced the control over drug loading during the construction of the co-delivery system,paving a way for the development of more functional carriers in nanomedicine.展开更多
We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The co...We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.展开更多
Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,tradit...Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.展开更多
Immune checkpoint inhibitors(ICIs)therapy targeting programmed cell death ligand 1(PD-L1)and programmed death protein 1(PD-1)had exhibited significant clinical benefits for cancer treatment such as triple negative bre...Immune checkpoint inhibitors(ICIs)therapy targeting programmed cell death ligand 1(PD-L1)and programmed death protein 1(PD-1)had exhibited significant clinical benefits for cancer treatment such as triple negative breast cancer(TNBC).However,the relatively low anti-tumor immune response rate and ICIs drug resistance highlight the necessity of developing ICIs combination therapy strategies to improve the anti-tumor effect of immunotherapy.Herein,the immunomodulator epigallocatechin gallate palmitate(PEGCG)and the immunoadjuvant metformin(MET)self-assembled into tumor-targeted micelles via hydrogen bond and electrostatic interaction,which encapsulated the therapeutic agents doxorubicin(DOX)-loaded PEGCG-MET micelles(PMD)and combined with ICIs(anti-PD-1 antibody)as therapeutic strategy to reduce the endogenous expression of PD-L1 and improve the tumor immunosuppressive microenvironment.The results presented that PMD integrated chemotherapy and immunotherapy to enhance antitumor efficacy in vitro and in vivo,compared with DOX or anti-PD-1 antibody for the therapy of TNBC.PMD micelles might be a potential candidate,which could remedy the shortcomings of antibody-based ICIs and provide synergistic effect to enhance the antitumor effects of ICIs in tumor therapy.展开更多
NiO_(x)as a hole transport material for inverted perovskite solar cells has received great attention owing to its high transparency,low fabrication temperature,and superior stability.However,the mismatched energy leve...NiO_(x)as a hole transport material for inverted perovskite solar cells has received great attention owing to its high transparency,low fabrication temperature,and superior stability.However,the mismatched energy levels and possible redox reactions at the NiO_(x)/perovskite interface severely limit the performance of NiO_(x) based inverted perovskite solar cells.Herein,we introduce a p-type self-assembled monolayer between NiO_(x)and perovskite layers to modify the interface and block the undesirable redox reaction between perovskite and NiO_(x)The selfassembled monolayer molecules all contain phosphoric acid function groups,which can be anchored onto the NiOr surface and passivate the surface defect.Moreover,the introduction of self-assembled monolayers can regulate the energy level structure of NiO_(x),reduce the interfacial band energy offset,and hence promote the hole transport from perovskite to NiO_(x)layer.Consequently,the device performance is significantly enhanced in terms of both power conversion efficiency and stability.展开更多
Acne vulgaris ranks as the second most prevalent dermatological condition worldwide,and there are still insufficient safe and reliable drugs to treat it.Cryptotanshinone(CTS),a bioactive compound derived from traditio...Acne vulgaris ranks as the second most prevalent dermatological condition worldwide,and there are still insufficient safe and reliable drugs to treat it.Cryptotanshinone(CTS),a bioactive compound derived from traditional Chinese medicine Salvia miltiorrhiza,has shown promise for treating acne vulgaris due to its broad-spectrum antimicrobial and significant anti-inflammatory properties.Nevertheless,its local application is hindered by its low solubility and poor skin permeability.To overcome these challenges,a carrierfree pure drug self-assembled nanosystem is employed,which can specifically modify drug molecules based on the disease type and microenvironment,offering a potential for more effective treatment.We designed and synthesized three distinct structures of cationic CTS-peptide conjugates,creating self-assembled nanoparticles.This study has explored their self-assembly behavior,skin permeation,cellular uptake,and both in vitro and in vivo anti-acne effects.Molecular dynamics simulations revealed these nanoparticles form through intermolecular hydrogen bonding andπ-πstacking interactions.Notably,self-assembled nanoparticles demonstrated enhanced bioavailability with higher skin permeation and cellular uptake rates.Furthermore,the nanoparticles exhibited superior anti-acne effects compared to the parent drug,attributed to heightened antimicrobial activity and significant downregulation of the MAPK/NF-κB pathway,leading to reduced expression of pro-inflammatory factors including TNF-α,IL-1βand IL-8.In summary,the carrier-free self-assembled nanoparticles based on CTS-peptide conjugate effectively address the issue of poor skin bioavailability,offering a promising new approach for acne treatment.展开更多
Supercapacitors based on two-dimensional MXene(Ti_(3)C_(2)T_(z))have shown extraordinary performance in ultrathin electrodes with low mass loading,but usually there is a significant reduction in high-rate performance ...Supercapacitors based on two-dimensional MXene(Ti_(3)C_(2)T_(z))have shown extraordinary performance in ultrathin electrodes with low mass loading,but usually there is a significant reduction in high-rate performance as the thickness increases,caused by increasing ion diffusion limitation.Further limitations include restacking of the nanosheets,which makes it challenging to realize the full potential of these electrode materials.Herein,we demonstrate the design of a vertically aligned MXene hydrogel composite,achieved by thermal-assisted self-assembled gelation,for high-rate energy storage.The highly interconnected MXene network in the hydrogel architecture provides very good electron transport properties,and its vertical ion channel structure facilitates rapid ion transport.The resulting hydrogel electrode show excellent performance in both aqueous and organic electrolytes with respect to high capacitance,stability,and high-rate capability for up to 300μm thick electrodes,which represents a significant step toward practical applications.展开更多
Forster resonance energy transfer(FRET)is a widely used spectroscopic technique.The development of donor-acceptor combinations is essential to advance this technique.To make the energy transfer efficiency independent ...Forster resonance energy transfer(FRET)is a widely used spectroscopic technique.The development of donor-acceptor combinations is essential to advance this technique.To make the energy transfer efficiency independent of the external environment,we explored the potential of constructing donor—acceptor combinations with lanthanide ion-doped nanoparticles(LNPs),in which the 4f electrons of the lanthanide ions are shielded by the 5s and 6p electrons.Non-radiative energy transfer between LNPs was demonstrated in self-assembled nanostructures and core-shell structure of LNPs was used to control the distance between donor and acceptor in self-assembled nanostructures.The emission intensity ratio of donor and acceptor illustrates that the energy transfer efficiency decreases significantly with increasing distance and the effective energy transfer distance is 8.5 nm,showing the potential of using LNPs as donor-acceptor pairs in the construction of distance-dependent energy transfer system.展开更多
Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interact...Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interaction with vip molecules.The different forms of supramolecular self-assemblies can be transformed into each other under certain conditions.The regulation of supramolecular self-assembly is not only helpful to understand the self-assembly principle,but also beneficial to its application.In the present study,the self-assembly behavior of epoxy-β-cyclodextrin(EP-β-CD)and mixed anionic and cationic surfactant system(sodium dodecyl sulfate/dodecyltrimethylammonium bromide,SDS/DTAB)in aqueous solution was studied.Morphological and particle size characterization found that the SDS/DTAB@EP-β-CD complex,as the basic building unit,self-assembled into worm-like micelles at lower temperatures and vesicles at higher temperatures.Nuclear magnetic resonance(NMR)and Fourier transform infrared spectroscopy(FT-IR)analysis revealed that the driving force for the formation of vesicles and worm-like micelles was the hydrogen bonds between EP-β-CD molecules,while water molecules played an important role in promoting vesicle formation between SDS/DTAB@EP-β-CD units.Herein,the mechanism of the morphologic transformation of SDS/DTAB@EP-β-CD supramolecular aggregates induced by temperature was elucidated by exploring the self-assembly process,which may provide an excellent basis for the development of delivery carriers.展开更多
基金supported by the National Natural Science Foundation of China(Nos.81873092,82174074)。
文摘The self-assembled nanoparticles(SAN)formed during the decoction process of traditional Chinese medicine(TCM)exhibit non-uniform particle sizes and a tendency for aggregation.Our group found that the p H-driven method can improve the self-assembly phenomenon of Herpetospermum caudigerum Wall.,and the SAN exhibited uniform particle size and demonstrated good stability.In this paper,we analyzed the interactions between the main active compound,herpetrione(Her),and its main carrier,Herpetospermum caudigerum Wall.polysaccharide(HCWP),along with their self-assembly mechanisms under different p H values.The binding constants of Her and HCWP increase with rising p H,leading to the formation of Her-HCWP SAN with a smaller particle size,higher zeta potential,and improved thermal stability.While the contributions of hydrogen bonding and electrostatic attraction to the formation of Her-HCWP SAN increase with rising p H,the hydrophobic force consistently plays a dominant role.This study enhances our scientific understanding of the self-assembly phenomenon of TCM improved by p H driven method.
基金supported by funding from the Energy Materials and Surface Sciences Unit of the Okinawa Institute of Science and Technology Graduate University,the OIST R&D Cluster Research Program,the OIST Proof of Concept(POC)Program,the JSPS KAKENHI Grant Number JP21F21754 and Alexander von Humboldt Foundation。
文摘Self-assembled monolayers(SAMs)are widely used as hole transport materials in inverted perovskite solar cells,offering low parasitic absorption and suitability for semitransparent and tandem solar cells.While SAMs have shown to be promising in small-area devices(≤1 cm^(2)),their application in larger areas has been limited by a lack of knowledge regarding alternative deposition methods beyond the common spin-coating approach.Here,we compare spin-coating and upscalable methods such as thermal evaporation and spray-coating for[2-(9H-carbazol-9-yl)ethyl]phosphonic acid(2PACz),one of the most common carbazole-based SAMs.The impact of these deposition methods on the device performance is investigated,revealing that the spray-coating technique yields higher device performance.Furthermore,our work provides guidelines for the deposition of SAM materials for the fabrication of perovskite solar modules.In addition,we provide an extensive characterization of 2PACz films focusing on thermal evaporation and spray-coating methods,which allow for thicker 2PACz deposition.It is found that the optimal 2PACz deposition conditions corresponding to the highest device performances do not always correlate with the monolayer characteristics.
基金Y.Zhan acknowledges funding support from the National Key Research and Development Program of China(2022YFE0137400)the National Natural Science Foundation of China(62274040)+5 种基金A.Yu acknowledges funding support from the National Natural Science Foundation of China(62304046)the National Key Research and Development Program of China(2022YFB2802802)the Key Laboratory of Rare Earths,Ganjiang Innovation Academy,Chinese Academy of SciencesX.Zhang acknowledges funding from the China Postdoctoral Science Foundation(GZC20230463)X.Li acknowledges funding from the China Postdoctoral Science Foundation(GZC20230461)We also acknowledge support from the Shanghai Science and Technology Innovation Action Plan 2023 Special Project for Supporting Carbon Peak Carbon Neutrality Project(23DZ1200400).
文摘The NiOx,due to its excellent semiconductor properties,ease of large-area deposition,and tunable optoelectronic characteristics,shows great potential in industrial large-area perovskite technologies.However,NiO_(x)-based perovskite solar cells(PSCs)are limited by interfacial photocatalytic chemical reactions and energy level mismatch.Thus,phosphate-based self-assembled monolayers(SAMs)have been widely developed for delicate interfacial modification;however,they suffer from severe issues such as self-aggregation and high cost.Herein,a low-cost carboxylate-based SAM(pyrenebutyric acid,PyBA)was used to modify NiO_(x),achieving an improved surface chemical environment and interfacial properties,such as an increased Ni^(3+)/Ni2^(+)ratio,a reduced proportion of high-valence Ni^(≥3+),and better-aligned hole transport interface energy level.The introduction of PyBA also results in larger grain size,higher uniformity,and enhanced photoluminescence(PL)from the bottom of the perovskite,yielding a significant increase in efficiency from an initial 22.48%to 25.14%,while increasing the open-circuit voltage(VOC)from 1.077 to 1.192 V.Additionally,a perovskite module with an aperture area of 21 cm^(2)achieved an efficiency of 22.28%,demonstrating the excellent scalability of the PyBA treatment.Moreover,the well-modified buried interface combined with the chemical inertness and structural rigidity of pyrene ensures excellent ultraviolet(UV)stability(the target module maintained 92%of the initial efficiency after 200 h and the control device only retained 40%).
基金supported by the National Research Foundation of Korea[NRF-2023–00211758].
文摘A new type of amphiphiles bearingmacrocycle such as cucurbit[7]uril(CB[7])spontaneously forms a nanomaterial in water,specifically vesicles(tACB[7]vesicles)with a positive surface charge,verified through various analytical techniques including TIRF,DLS and TEM.Functional validation not only reveals the accessibility of the CB[7]portal on these vesicles allowing CB[7]-based host-vip interactions with various functional vip molecules such as fluorescein isothiocyanate conjugated adamantylammonium and spermine(FITC-AdA and FITC-SPM,respectively)using confocal laser scanning microscopy,but also showcases the effective internalization of tACB[7]vesicles into cancer cells with the anticancer drug oxaliplatin(OxPt),as a vip to CB[7],through in vitro cell experiments.Hence,this study provides a blueprint to impart amphiphilic properties to CB[7]through synthetic design and highlights the potential of CB[7]derivatives as a new class of unconventional amphiphiles self-assembling into functional nanomaterials for advanced drug delivery.
基金financially supported by the National Key R&D Program of China(No.2022YFB3707300)the National Natural Science Foundation of China(Nos.22133002,22373089)the support from the Excellent Youth Foundation of Henan Scientific Committee(No.242300421032).
文摘A significant challenge in developing block copolymer photonic crystals is constructing low-symmetric ordered phases,which are essential for achieving a complete photonic band gap.Here,we propose a promising strategy to create low-symmetric ordered morphologies by incorporating shape-anisotropic rod-like side chains into block copolymers.Using dissipative particle dynamics simulations,we demonstrate that block copolymers with longer rod-like side chains can self-assemble into a hexagonally packed columnar phase characterized by a low-symmetric rectangular cross-section.Photonic band structure calculations reveal that this low-symmetric columnar phase can exhibit a complete photonic band gap,with the gap size dependent on the aspect ratio of the rectangular cross-sections of the columns.Our findings suggest an effective approach to constructing low-symmetric photonic crystals through the self-assembly of block copolymers with shape-anisotropic segments.
基金supported by the National Natural Science Foundation of China(22305119,12204234)the Natural Science Foundation of Jiangsu Province(BK20220878)+3 种基金the Fundamental Research Funds for the Central Universities(NS2023059)the China Postdoctoral Science Foundation(2022TQ0157,2023M741695)the Liaoning University Talent Introduction Research Startup Project(d295000048)the Center for Microscopy and Analysis of Nanjing University of Aeronautics and Astronautics for characterization support。
文摘The optimization of hole transport layer(HTL)is crucial for achieving high efficiency and stability in inverted perovskite solar cells(PSCs)due to its role in facilitating hole transport and passivating the perovskite bottom interface.While self-assembled monolayers(SAMs)are commonly used for this purpose,the inherent limitations of a single SAM,such as fixed energy levels and rigid structure,restrict their adaptability for different perovskite components and further efficiency enhancement.Here,we demonstrate a stepwise deposition method for SAM-based HTLs to address this issue.We regulated the energy level gradient by depositing two SAMs with distinct energy levels,while the interactions between the phosphate groups in the SAMs and perovskite effectively reduce defect density at the bottom interface of the perovskite film.The as-fabricated PSCs achieved enhanced efficiency and stability with PCEs of 25.7% and 24.0% for rigid and flexible PSCs,respectively;these devices maintain 90% of their initial PCE after 500 h of maximum power point tracking,and retain 98% of their initial PCE after 4,000 bending cycles,representing one of the most stable flexible PSCs reported to date.
基金supported by the Natural Science Foundation of China(22425903,U24A20568,61705102,62288102,22409091,22409090 and 62205142)the National Key R&D Program of China(2023YFB4204500)the Jiangsu Provincial Departments of Science and Technology(BE2022023,BK20220010,BZ2023060,BK20240561,and BK20240562)。
文摘Inverted p-i-n perovskite solar cells(PSCs)based on self-assembled monolayers(SAMs)as hole-selective layers(HSLs)have produced potential record efficiencies of more than 26%by tuning work function,dipole,and passivation defects.However,the stability of the SAM molecules,the stability of the molecular anchoring conformation,and the impact on the stability of subsequent PSCs have not been clearly elucidated.In this review,we systematically discussed the intrinsic connection between the molecular conformation(including anchoring groups,spacer groups,and terminal groups)and the stability of SAMs.Sequentially,the research progress of SAMs as HSLs in improving the stability of PSCs is summarized,including photostability,thermal stability,ion migration,and residual stress.Finally,we look forward to the shortcomings and possible challenges of using SAMs as HSLs for inverted PSCs.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.22173051,21829301,21774066)College Discipline Innovation and Intelligence Introduction Program(111 Project(B16027)+1 种基金the International Cooperation Base(2016D01025)Tianjin International Joint Research and Development Center。
文摘Spatial confinement of block copolymers can induce frustrations,which can further be utilized to regulate self-assembled structures,thus providing an efficient route for fabricating novel structures.We studied the self-assembly of AB di-block copolymers(di-BCPs)confined in Janus spherical nanocavities using simulations,and explained the structure formation mechanisms.In the case of a strongly selective cavity wall,all the lamella-forming,gyroid-forming,and cylinder-forming di-BCPs can form interfacial frustration-induced Janus concentric perforated lamellar nanoparticles,whose outermost is a Janus spherical shell and the internal is a sphere with concentric perforated lamellar structure.In particular,Janus concentric perforated lamellar nanoparticles with holes distributed only near the equatorial plane were obtained in both lamella-forming and gyroid-forming di-BCPs,directly reflecting the effect of interfacial frustration.The minority-block domain of the cylider-forming di-BCPs may form hemispherical perforated lamellar structures with holes distributed in parallel layers with a specific orientation.For symmetric di-BCPs,both the A and B domains in each nanoparticle are continuous,interchangeable,and have rotational symmetry.While for gyroid-forming and cylinder-forming di-BCPs,only the majority-block domains are continuous in each nanoparticle,and holes in the minority-block domains usually have rotational symmetry.In the case of a weakly selective cavity wall,the inhomogeneity of the cavity wall results in structures having a specific orientation(such as flower-like and branched structures in gyroid-forming and cylinder-forming di-BCPs)and a perforated wetting layer with uniformly distributed holes.The novel nanoparticles obtained may have potential applications in nanotechnology as functional nanostructures or nanoparticles.
基金supported by the National Natural Science Foundation of China(22273045,52488101 and 22472043)Ningbo Youth Science and Technology Innovation Leading Talent(2023QL041)Tsinghua University Independent Scientific Research Plan for Young Investigator,Tsinghua University Dushi Program,and Initiative Scientific Research Program。
文摘Directly correlating the morphology and composition of interfacial water is vital not only for studying water icing under critical conditions but also for understanding the role of protein–water interac-tions in bio-relevant systems.In this study,we present a model system to study two-dimensional(2D)water layers under ambient conditions by using self-assembled monolayers(SAMs)supporting the physisorp-tion of the Cytochrome C(Cyt C)protein layer.We observed that the 2D island-like water layers were uniformly distributed on the SAMs as characterized by atomic force microscopy,and their composition was confirmed by nano-atomic force microscopy-infrared spectroscopy and Raman spectroscopy.In addition,these 2D flakes could grow under high-humidity conditions or melt upon the introduction of a heat source.The formation of these flakes is attributed to the activation energy for water desorption from the Cyt C being nearly twofold high than that from the SAMs.Our results provide a new and effective method for further understanding the water–protein interactions.
基金the National Natural Science Foundation of China(51925206,U1932214,52302052)the National Natural Science Foundation of China(52322318)+6 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0450301)the Fundamental Research Funds for the Central Universities(WK2060000051,20720220009)the National Key Research and Development Program of China(No.2023YFB3809700)the Innovation and Technology Fund(GHP/100/20SZ,GHP/102/20GD,MRP/040/21X,ITS/147/22FP)the Research Grants Council of Hong Kong Grant(N_City U102/23,C4005-22Y,C1055-23G,11306521)the Green Tech Fund(GTF202020164)the Science Technology and Innovation Committee of Shenzhen Municipality(SGDX20210823104002015,JCYJ20220818101018038)。
文摘Self-assembled monolayers(SAMs)have been commonly employed as hole-selective layers(HSLs)in inverted(p-i-n)perovskite solar cells(PSCs),and typically only a single-component SAM is applied,which plays limited role in selective hole transport.Herein,we synthesize a novel SAM,(4-(3,11-dibro mo-7H-dibenzo[c,g]carbazol-7-yl)butyl)phosphonic acid(Br-4PADBC),and apply it as a complementary component to the commonly used[2-(3,6-dimeth oxy-9H-carbazol-9-yl)ethyl]phosphonic acid(MeO-2PACz)SAM,accomplishing boosted hole transport in inverted PSCs.A series of characterizations and theoretical calculations are employed to unravel the roles of each components within the binary SAM(bi-SAM).The involvements of the non-planar dibenzo[c,g]carbazole unit and electron-withdrawing Br atoms induce larger dipole moment of Br-4PADBC than MeO-2PACz,resulting in much deeper work function of ITO and consequently improved alignment with the valence band energy level of perovskite.Besides,the introduced Br atoms improve the quality of perovskite crystals and help passivate defects of perovskite.On the other hand,the existence of the conventional MeO-2PACz SAM ensures the considerable conductivity of the bi-SAM and thus efficient hole extraction from the perovskite layer.As a result,inverted PSC devices based on bi-SAM HSL deliver a decent power conversion efficiency(PCE)of 24.52%as well as dramatically improved thermal and operational stabilities.
基金supported by the Young Cross Team Project of CAS(No.JCTD-2021-14)the National Natural Science Foundation of China(51925206)Gusu Innovation and Entrepreneur Leading Talents(ZXL2022466)。
文摘Self-assembled monolayers(SAMs),owing to their amphiphilic nature,tend to aggregate,which impedes the formation of a dense and uniform SAM on the substrate.Additionally,the weak adsorption ability of SAMs on the indium tin oxide(ITO)surface and the desorption of hydroxyl(OH)from the ITO surface induced by polar solvents can lead to the formation of vacancies.Herein,a dimethylacridine-based SAM is incorporated into the perovskite precursor solution.This SAM can be extruded from the precursor solution and enriched on the bottom surface of the perovskite,filling the vacancies and in situ forming a mixed SAM with MeO-2PACz as a hole-selective layer(HSL).The in situ formed mixed SAM optimizes the energy level alignment between the HSL and the perovskite,facilitating hole extraction and alleviating the residual strain of the perovskite film.Consequently,the perovskite solar cells(PSCs),based on the mixed SAM,achieve a power conversion efficiency(PCE)of 25.69%and exhibit excellent operational stability.When this approach is applied to 1.78 eV bandgap PSC devices,it yields a PCE of 20.08%.This work presents a unique strategy for fabricating both high-quality perovskite films and superior buried interfaces,which is also applicable to wide-bandgap PSCs.
基金supported by the National Natural Science Foundation of China(Nos.82202274,82072032,22161016,32025021,12374390,52002380 and 31971292),the National Science and Technology Major Project(No.2023ZD0500902)the Fellowship of China Postdoctoral Science Foundation(No.2023M743559)+2 种基金the Member of Youth Innovation Promotion Association Foundation of CAS,China(No.2023310)the Key Scientific and Technological Special Project of Ningbo City(No.2023Z209)the Natural Science Foundation of Zhejiang Province(No.LQ23H180003)。
文摘Recently,stimuli-responsive nanocarriers capable of precision drug release have garnered significant attention in the field of drug delivery.Here,an in-situ dynamic covalent self-assembled(DCS)strategy was utilized to develop a co-delivery system.This assembly was based on a thiol-disulfide-exchange reaction,producing disulfide macrocycles in an oxidizing aerial environment.These macrocycles encapsulated the anti-cancer drug(paclitaxel,PTX)on the surface of gold nanoparticles,which served as photothermal therapy agents during the self-assembly.In the DCS process,the kinetic control over the concentration of each building unit within the reaction system led to the formation of a stable co-delivery nanosystem with optimal drug-loading efficiency.Notably,the high glutathione(GSH)concentrations in tumor cells caused the disulfide macrocycles in nanostructures to break,resulting in drug release.The stimuli-responsive performances of the prepared nanosystems were determined by observing the molecular structures and drug release.The results revealed that the self-assembled nanosystem exhibited GSH-triggered drug release and good photothermal conversion capability under near-infrared light.Moreover,the in vitro and in vivo results revealed that conjugating the targeting molecule of cRGD with co-delivery nanosystem enhanced its biocompatibility,chemo-photothermal anti-cancer effect.Overall,our findings indicated that in-situ DCS strategy enhanced the control over drug loading during the construction of the co-delivery system,paving a way for the development of more functional carriers in nanomedicine.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.10864001）, the Natural Science Foundation of Yunnan Province （No.2008ZC159M）, and No.8 Middle-Aged and Young Academic Talent Reserve Project of Yunnan Province （No.2005PY01-51）.
文摘We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.
基金financially supported by the National Natural Science Foundation of China(No.51373059)the Graphene Powder&Composite Materials Research Center of FujianXiamen Key Laboratory of Polymers and Electronic Materials。
文摘Janus films with asymmetric physical/chemical properties have attracted con siderable attention due to their promising applications in personal thermal management,electronic skin s,sensors,actuators,etc.However,traditional methods for fabricating Janus films conventionally need the assistance of an interface or auxiliary equipment,which are usually complex and time-consuming.Herein,flexible poly(vinyl alcohol)(PVA)/graphene oxide(GO)/h-BN(recorded as PVA/GO/h-BN)Janus films with thermally,optically,and electrically anisotropic properties are fabricated by a simple density deposition self-assem bly method,which just utilizes the density difference between GO and h-BN during water evaporation.Experimental results show that the two sides of the acquired Janus films have obvious asymmetric characteristics.In the original state of the PVA/GO/h-BN Janus films,the thermal conductivity of the GO side(10.06 W·m^(-1)·K^(-1))is generally lower than that of the h-BN side(10.48W·m^(-1)·K^(-1)).But after GO is reduced,the thermal conductivity of the rGO side reaches 12.17 W·m^(-1)·K^(-1),surpassing that of the h-BN side.In addition,the relative reflectance of the h-BN side of Janus film is also significantly higher than that of the rGO side,and the su rface resistance difference between the two sides is about 4 orders of magnitude.The prepared PVA/GO/h-BN Janus films show great application potential in human thermal management,light conversion switches,and electronic skins.This study provides a simple and versatile strategy for fabricating Janus films with multifunctional(such as thermal,optical,and electrical)anisotropies.
基金the projects of the National Key Research and Development Program(No.2021YFA0716702)the National Natural Science Foundation of China(Nos.61805122,22022404 and 22074050)+5 种基金Green Industry Science and Technology Leading Project of Hubei University of Technology(No.XJ2021003301)the National Natural Science Foundation of Hubei Province(No.2022CFA033)supported by Chinese Society of Clinical Oncology(CSCO)supported by Jiangsu Hengrui Cancer Research Foundation(No.YHR2019–0325)supported by the Fundamental Research Funds for the Central Universities(No.CCNU22QN007)supported by the Opening Fund from the Jiangsu Key Laboratory of Medical Optics,Suzhou Institute of Biomedical Engineering and Technology(No.JKLMO202203)supported by the Key Laboratory of Optic-electric Sensing and Analytical Chemistry for Life Science,MO(No.M2022–5).
文摘Immune checkpoint inhibitors(ICIs)therapy targeting programmed cell death ligand 1(PD-L1)and programmed death protein 1(PD-1)had exhibited significant clinical benefits for cancer treatment such as triple negative breast cancer(TNBC).However,the relatively low anti-tumor immune response rate and ICIs drug resistance highlight the necessity of developing ICIs combination therapy strategies to improve the anti-tumor effect of immunotherapy.Herein,the immunomodulator epigallocatechin gallate palmitate(PEGCG)and the immunoadjuvant metformin(MET)self-assembled into tumor-targeted micelles via hydrogen bond and electrostatic interaction,which encapsulated the therapeutic agents doxorubicin(DOX)-loaded PEGCG-MET micelles(PMD)and combined with ICIs(anti-PD-1 antibody)as therapeutic strategy to reduce the endogenous expression of PD-L1 and improve the tumor immunosuppressive microenvironment.The results presented that PMD integrated chemotherapy and immunotherapy to enhance antitumor efficacy in vitro and in vivo,compared with DOX or anti-PD-1 antibody for the therapy of TNBC.PMD micelles might be a potential candidate,which could remedy the shortcomings of antibody-based ICIs and provide synergistic effect to enhance the antitumor effects of ICIs in tumor therapy.
文摘NiO_(x)as a hole transport material for inverted perovskite solar cells has received great attention owing to its high transparency,low fabrication temperature,and superior stability.However,the mismatched energy levels and possible redox reactions at the NiO_(x)/perovskite interface severely limit the performance of NiO_(x) based inverted perovskite solar cells.Herein,we introduce a p-type self-assembled monolayer between NiO_(x)and perovskite layers to modify the interface and block the undesirable redox reaction between perovskite and NiO_(x)The selfassembled monolayer molecules all contain phosphoric acid function groups,which can be anchored onto the NiOr surface and passivate the surface defect.Moreover,the introduction of self-assembled monolayers can regulate the energy level structure of NiO_(x),reduce the interfacial band energy offset,and hence promote the hole transport from perovskite to NiO_(x)layer.Consequently,the device performance is significantly enhanced in terms of both power conversion efficiency and stability.
文摘Acne vulgaris ranks as the second most prevalent dermatological condition worldwide,and there are still insufficient safe and reliable drugs to treat it.Cryptotanshinone(CTS),a bioactive compound derived from traditional Chinese medicine Salvia miltiorrhiza,has shown promise for treating acne vulgaris due to its broad-spectrum antimicrobial and significant anti-inflammatory properties.Nevertheless,its local application is hindered by its low solubility and poor skin permeability.To overcome these challenges,a carrierfree pure drug self-assembled nanosystem is employed,which can specifically modify drug molecules based on the disease type and microenvironment,offering a potential for more effective treatment.We designed and synthesized three distinct structures of cationic CTS-peptide conjugates,creating self-assembled nanoparticles.This study has explored their self-assembly behavior,skin permeation,cellular uptake,and both in vitro and in vivo anti-acne effects.Molecular dynamics simulations revealed these nanoparticles form through intermolecular hydrogen bonding andπ-πstacking interactions.Notably,self-assembled nanoparticles demonstrated enhanced bioavailability with higher skin permeation and cellular uptake rates.Furthermore,the nanoparticles exhibited superior anti-acne effects compared to the parent drug,attributed to heightened antimicrobial activity and significant downregulation of the MAPK/NF-κB pathway,leading to reduced expression of pro-inflammatory factors including TNF-α,IL-1βand IL-8.In summary,the carrier-free self-assembled nanoparticles based on CTS-peptide conjugate effectively address the issue of poor skin bioavailability,offering a promising new approach for acne treatment.
基金financed by the National Natural Science Foundation of China(52103212)Jiangxi Provincial Natural Science Foundation(20224BAB214022)+7 种基金the SSF Synergy Program(EM16-0004)Swedish Energy Agency(EM 42033-1)the Knut and Alice Wal enberg(KAW)Foundation through a Fellowship Grant and a Project Grant(KAW2020.0033)Support from the National Natural Science Foundation of China(61774077)the Youth Projects of Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province(2020A1515110738)the Key Projects of Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province(2019B1515120073)the High-End Foreign Experts Project(G20200019046)the Guangzhou Key laboratory of Vacuum Coating Technologies and New Energy Materials Open Projects Fund(KFVE20200006)
文摘Supercapacitors based on two-dimensional MXene(Ti_(3)C_(2)T_(z))have shown extraordinary performance in ultrathin electrodes with low mass loading,but usually there is a significant reduction in high-rate performance as the thickness increases,caused by increasing ion diffusion limitation.Further limitations include restacking of the nanosheets,which makes it challenging to realize the full potential of these electrode materials.Herein,we demonstrate the design of a vertically aligned MXene hydrogel composite,achieved by thermal-assisted self-assembled gelation,for high-rate energy storage.The highly interconnected MXene network in the hydrogel architecture provides very good electron transport properties,and its vertical ion channel structure facilitates rapid ion transport.The resulting hydrogel electrode show excellent performance in both aqueous and organic electrolytes with respect to high capacitance,stability,and high-rate capability for up to 300μm thick electrodes,which represents a significant step toward practical applications.
基金Project supported by the National Natural Science Foundation of China(22171054)Shanghai Sci.Tech.Comm.(22XD1420300,21ZR1403900)Innovative Research Team of High-level Local Universities in Shanghai and a key laboratory programof the Education Commission of Shanghai Municipality(ZDSYS14005)。
文摘Forster resonance energy transfer(FRET)is a widely used spectroscopic technique.The development of donor-acceptor combinations is essential to advance this technique.To make the energy transfer efficiency independent of the external environment,we explored the potential of constructing donor—acceptor combinations with lanthanide ion-doped nanoparticles(LNPs),in which the 4f electrons of the lanthanide ions are shielded by the 5s and 6p electrons.Non-radiative energy transfer between LNPs was demonstrated in self-assembled nanostructures and core-shell structure of LNPs was used to control the distance between donor and acceptor in self-assembled nanostructures.The emission intensity ratio of donor and acceptor illustrates that the energy transfer efficiency decreases significantly with increasing distance and the effective energy transfer distance is 8.5 nm,showing the potential of using LNPs as donor-acceptor pairs in the construction of distance-dependent energy transfer system.
基金China Postdoctoral Science Foundation(2020M681125)National Natural Science Foundation of China(32272254,31901618)Collaborative Innovation Center of Fragrance Flavour and Cosmetics.
文摘Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interaction with vip molecules.The different forms of supramolecular self-assemblies can be transformed into each other under certain conditions.The regulation of supramolecular self-assembly is not only helpful to understand the self-assembly principle,but also beneficial to its application.In the present study,the self-assembly behavior of epoxy-β-cyclodextrin(EP-β-CD)and mixed anionic and cationic surfactant system(sodium dodecyl sulfate/dodecyltrimethylammonium bromide,SDS/DTAB)in aqueous solution was studied.Morphological and particle size characterization found that the SDS/DTAB@EP-β-CD complex,as the basic building unit,self-assembled into worm-like micelles at lower temperatures and vesicles at higher temperatures.Nuclear magnetic resonance(NMR)and Fourier transform infrared spectroscopy(FT-IR)analysis revealed that the driving force for the formation of vesicles and worm-like micelles was the hydrogen bonds between EP-β-CD molecules,while water molecules played an important role in promoting vesicle formation between SDS/DTAB@EP-β-CD units.Herein,the mechanism of the morphologic transformation of SDS/DTAB@EP-β-CD supramolecular aggregates induced by temperature was elucidated by exploring the self-assembly process,which may provide an excellent basis for the development of delivery carriers.
