A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip'...A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.展开更多
The mechanism type plays a decisive role in the mechanical performance of robotic manipulators. Feasible mechanism types can be obtained by applying appropriate type synthesis theory, but there is still a lack of effe...The mechanism type plays a decisive role in the mechanical performance of robotic manipulators. Feasible mechanism types can be obtained by applying appropriate type synthesis theory, but there is still a lack of effective and efficient methods for the optimum selection among different types of mechanism candidates. This paper presents a new strategy for the purpose of optimum mechanism type selection based on the modified particle swarm optimization method. The concept of sub-swarm is introduced to represent the different mechanisms generated by the type synthesis, and a competitive mechanism is employed between the sub-swarms to reassign their population size according to the relative performances of the mechanism candidates to implement the optimization. Combining with a modular modeling approach for fast calculation of the performance index of the potential candidates, the proposed method is applied to determine the optimum mechanism type among the potential candidates for the desired manipulator. The effectiveness and efficiency of the proposed method is demonstrated through a case study on the optimum selection of mechanism type of a heavy manipulator where six feasible candidates are considered with force capability as the specific performance index. The optimization result shows that the fitness of the optimum mechanism type for the considered heavy manipulator can be up to 0.578 5. This research provides the instruction in optimum selection of mechanism types for robotic manipulators.展开更多
Gate type selection is very important for mould design. Improper gate typemay lead to poor product quality and low production efficiency. Although numerical simulationapproach could be used to optimize gate location, ...Gate type selection is very important for mould design. Improper gate typemay lead to poor product quality and low production efficiency. Although numerical simulationapproach could be used to optimize gate location, the determination of gate type is still up todesigners' experience. A novel method for selecting gate type based on fuzzy logic is proposed. Theproposed methodology follows three steps: Design requirements for gate is extracted and generalized;Possible gate types (design schemes) are presented; The fuzzy mapping relationship between gatedesign requirements and gate design scheme is established based on fuzzy composition and fuzzyrelation transition matrices that are assigned by domain experts.展开更多
Based on the practice of Baosteel＇ s 60000 m3/h air separation unit （ASU） ,which is the first domestically- integrated unit of such a scale, this paper studies the principles of type selection of the distribution c...Based on the practice of Baosteel＇ s 60000 m3/h air separation unit （ASU） ,which is the first domestically- integrated unit of such a scale, this paper studies the principles of type selection of the distribution control system （DCS）. It discusses the design of the unit＇s control system,which involves a compressor system,a purification system （molecular sieving）, a turbo expansion system and an air separation system. The final part of the paper discusses the maintenance and future development of the ASU control system at Baosteel.展开更多
Firstly data standardization technology and combined classification method have been applied to carry out classification of kinematic behaviors and mechanisms in the mapping field between the kinematic behavior level ...Firstly data standardization technology and combined classification method have been applied to carry out classification of kinematic behaviors and mechanisms in the mapping field between the kinematic behavior level and the mechanism level of conceptual design.The principle of computer coding and storing have been built to give a fast and broad selection of mechanisms that meets the requirements of basic motion characters.Then on the basis of mentioned above,the heuristic matching propagation principle (HMPP) of kinematic behaviors and its true table serves as a guide to perform mechanism types selection.Finally an application is given to indicate its practicability and effectiveness.展开更多
At the beginning of 21st century, with the rapid and steady development of China economy, a lot of large scale hydropower projects with large dams from 200 m to 300 m high are being or to be built. China dam construct...At the beginning of 21st century, with the rapid and steady development of China economy, a lot of large scale hydropower projects with large dams from 200 m to 300 m high are being or to be built. China dam constructions are reaching the level of 300 m high arch dam, 250 high CFRD (concrete face rockfill dam) and 200 m high RCC (roller compacted concrete) gravity dam. Due to the safety and the economy, the type selection for high dams has become the key issue during the argumentation for the hydropower projects, and further efforts are still needed in this aspect for high dams. After reviewing the high dam constructions in China and abroad, authors proposed some advices for the selection of dam types, and hope that it can provide some helpful information for the researches and the design of high dams.展开更多
With rapid development of nuclear power in China, in view of reactor type selection, this paper analyzes the current situation that faces nuclear power industry, the technical characteristics of optional reactors and ...With rapid development of nuclear power in China, in view of reactor type selection, this paper analyzes the current situation that faces nuclear power industry, the technical characteristics of optional reactors and the tendency of nuclear power technology development in the future. The proposals put forward in this paper include choosing and introducing GW-class advanced PWR as main reactors, carrying out self-supporting projects and technical transfer negotiations, in addition, promoting the design of the advanced generation-Ⅱ PWR and initiating small-scaled construction. The ultimate target is to catch up with the world advanced level by means of technical upgrading and recreation based on technology importation and assimilation.展开更多
The type selection of burning equipment for boilers is affected significantly by the slagging characteristics of coal. Based on the engineering statistics method, the designed furnace parameters are obtained from the ...The type selection of burning equipment for boilers is affected significantly by the slagging characteristics of coal. Based on the engineering statistics method, the designed furnace parameters are obtained from the 600-MW and 1 000-MW boilers with tangential firing and wall firing. The power and arrangement of the burners are analyzed. Their impacts on slagging on heating surfaces and the carbon contents in the ash and cinders are also discussed. Thermal parameters of furnace are recommended for boilers of 600 MW and 1 000 MW firing slagging coal in the design. The static or rotary classifier should be the first choice for the pulverizing system.展开更多
When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coa...When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coal and the technical measures are discussed for enhancing the combustion and burnout.The adaptability of tangential firing,wall firing and double-arch firing for low volatile coal is studied.Based on the statistic analysis for the main design parameters of domestic low volatile coal fired boilers with tangential firing,wall firing or double-arch W flame firing,the thermal performance for various boiler furnaces is recommended.The combustion systems for different types of boilers are also put forward for coals with different volatiles.展开更多
The special design for the furnace and burner of boilers burning lignite is analyzed and the type selection of the pulverizing system is discussed by taking account of the lignite’s characteristics of high moisture, ...The special design for the furnace and burner of boilers burning lignite is analyzed and the type selection of the pulverizing system is discussed by taking account of the lignite’s characteristics of high moisture, low heating value and low ash fusion temperature. The impact of such characteristics on the type selection of burning equipment and pulverizing systems for the lignite boiler is studied. The value ranges of the furnace characteristic parameters for the lignite boiler are recommended. For the old lignite, the premix period in the burner should not be too long in order to avoid slagging and the velocity of the primary air is suggested to be between 17 m/s and 22 m/s. The direct-flow burner with tangential firing is preferred for lignite with the moisture higher than 35%. The medium-speed mill is better to be used for lignite with the moisture less than 35%, while for lignite with the moisture higher than 40% the fan mill should be the first choice.展开更多
This paper has concluded six features that belong to passenger vehicle types based on genetic algorithm(GA)of feature selection.We have obtained an optimal feature subset,including length,ratio of width and length,and...This paper has concluded six features that belong to passenger vehicle types based on genetic algorithm(GA)of feature selection.We have obtained an optimal feature subset,including length,ratio of width and length,and ratio of height and length.And then we apply this optimal feature subset as well as another feature set,containing length,width and height,to the network input.Back-propagation(BP)neural network and support vector machine(SVM)are applied to classify the passenger vehicle type.There are four passenger vehicle types.This paper selects 400 samples of passenger vehicles,among which 320 samples are used as training set(each class has 80 samples)and the other 80 samples as testing set,taking the feature of the samples as network input and taking four passenger vehicle types as output.For the test,we have applied BP neural network to choose the optimal feature subset as network input,and the results show that the total classification accuracy rate can reach 96%,and the classification accuracy rate of first type can reach 100%.In this condition,we obtain a conclusion that this algorithm is better than the traditional ones[9].展开更多
New type professional farmers are farmers who possess certain resources and capitals,have certain extent of spirit of entrepreneurship,and are fully capable of obtaining and allocating resources related to agricultura...New type professional farmers are farmers who possess certain resources and capitals,have certain extent of spirit of entrepreneurship,and are fully capable of obtaining and allocating resources related to agricultural production and management,and engaged in agricultural production and management for obtaining average profit.Cultivation of new type professional farmers should be promoted in the process and at the background of"coordinated development of industrialization,informationization,urbanization and agricultural modernization".It should establish a proper cultivation subject system consisting of government,enterprises,rural communities and nonprofit organizations.Relying on multiple motive forces,efforts should be concentrated on cultivating those farmers with enterprising,highly innovative and learning ability,to guide traditional farmers to change into learning,enterprising and innovative ones.In addition,cultivation of new type professional farmers must rely on farmer education and training,modern agricultural development,increase in agricultural comparative advantage,innovation of rural management system and mechanism,multiple types of agricultural operation on a fairly large scale,as well as construction and regulation of new rural communities.Finally,it is recommended to provide system guarantee from long-term input mechanism of new type professional farmer education and training,incentive and restrictive mechanism of new type professional farmer cultivation,and construction of favorable environment for agricultural entrepreneurship.展开更多
Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was...Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was studied with 100 crosses derived from 10 sterile lines × 10 restorer lines. There was a complex relationship between parts of the traits of the two aspects. The angle of the 2nd leaf from the top and single panicle weight played important roles in plant type system and amylose content and grain length in grain quality system. The angle of the 2nd leaf from the top, plant height and single panicle weight had a great effect on grain quality traits, and amylose content, brown rice rate and translucency were easily influenced by plant type traits. Selection index model indicated that japonica hybrid rice in Northern China with good quality was characterized by broad flag leaf and 2nd leaf from the top, narrow and short 3rd leaf from the top, low plant height, short culm, long and more panicles and low single panicle weight.展开更多
This gene pyramiding strategy is based on the idea of efficiently pyramiding genes of interest by crosses and selection to obtain a population with favorable alleles from different breeds or lines, which is called an ...This gene pyramiding strategy is based on the idea of efficiently pyramiding genes of interest by crosses and selection to obtain a population with favorable alleles from different breeds or lines, which is called an ideal population. We investigate impacts of some factors on the pyramiding efficiencies by simulation. These factors include selection strategies （the breeding value selection, the molecular scores selection and the index selection）, proportion selected （2, 10 and 20%）, recombination rates between adjacent target genes （0.1, 0.3 and 0.5） and different mating types （the random mating and the positive assortative mating avoiding sib mating）. The results show that： （1） The more recombination rate and the lower proportion male selected, the better pyramiding efficiency; （2） the ideal population is obtained via various selection strategies, while different selection strategies are suitable for different breeding objectives. From the perspective of pyramiding target genes merely, the molecular scores selection is the best one, for the purpose of pyramiding target genes and recovering genetic background of the target trait, the index selection is the best one, while from the saving cost point of view, the breeding value selection is the best one; （3） the positive assortative mating is more efficient for gene pyramiding compared with the random mating in the terms of the number of generations of intercross for getting the ideal population.展开更多
On the basis of Part (Ⅰ) of this series some applications to the approximation of set_valued functions are obtained: Korovkin type theorems, a method to extend classical approximation operators to the set_valued sett...On the basis of Part (Ⅰ) of this series some applications to the approximation of set_valued functions are obtained: Korovkin type theorems, a method to extend classical approximation operators to the set_valued setting and a Jackson type estimate.展开更多
In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign meth...In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign methods for choosing the pulverizing system for lignite boilers,it is suggested that the particle size of coal,the drying time,the drying temperature and the humidity should be taken into account when measuring the free moisture of lignite,and the total moisture could also be the principle for type selection of pulverizer for lignite boilers.Furthermore,the determination of pulverized-coal moisture has great influence on the running of pulverizing systems.The actual moisture of certain pulverized coals is compared with that calculated with different methods and a feasible method for determining the moisture of the pulverized coal is suggested.展开更多
This paper mainly introduces the calculation and selection process of the feed mechanism of the truss manipulator. According to the handling load, beat and handling accuracy required by the production line, the three ...This paper mainly introduces the calculation and selection process of the feed mechanism of the truss manipulator. According to the handling load, beat and handling accuracy required by the production line, the three shaft transmission mechanism of the truss is calculated and selected.展开更多
基金Project (50374058) supported by the National Natural Science Foundation of China and Shanghai Baosteel Group Co.
文摘A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.
基金supported by National Natural Science Foundation of China (Grant No. 51075259)Program for New Century Excellent Talents in University of Ministry of Education, China (Grant No. NCET-10-0579)+1 种基金National Basic Research Program of China (973 program, Grant No.2006CB705407)Key Technologies R&D Program of Shanghai,China (Grant No. 10111100203)
文摘The mechanism type plays a decisive role in the mechanical performance of robotic manipulators. Feasible mechanism types can be obtained by applying appropriate type synthesis theory, but there is still a lack of effective and efficient methods for the optimum selection among different types of mechanism candidates. This paper presents a new strategy for the purpose of optimum mechanism type selection based on the modified particle swarm optimization method. The concept of sub-swarm is introduced to represent the different mechanisms generated by the type synthesis, and a competitive mechanism is employed between the sub-swarms to reassign their population size according to the relative performances of the mechanism candidates to implement the optimization. Combining with a modular modeling approach for fast calculation of the performance index of the potential candidates, the proposed method is applied to determine the optimum mechanism type among the potential candidates for the desired manipulator. The effectiveness and efficiency of the proposed method is demonstrated through a case study on the optimum selection of mechanism type of a heavy manipulator where six feasible candidates are considered with force capability as the specific performance index. The optimization result shows that the fitness of the optimum mechanism type for the considered heavy manipulator can be up to 0.578 5. This research provides the instruction in optimum selection of mechanism types for robotic manipulators.
文摘Gate type selection is very important for mould design. Improper gate typemay lead to poor product quality and low production efficiency. Although numerical simulationapproach could be used to optimize gate location, the determination of gate type is still up todesigners' experience. A novel method for selecting gate type based on fuzzy logic is proposed. Theproposed methodology follows three steps: Design requirements for gate is extracted and generalized;Possible gate types (design schemes) are presented; The fuzzy mapping relationship between gatedesign requirements and gate design scheme is established based on fuzzy composition and fuzzyrelation transition matrices that are assigned by domain experts.
文摘Based on the practice of Baosteel＇ s 60000 m3/h air separation unit （ASU） ,which is the first domestically- integrated unit of such a scale, this paper studies the principles of type selection of the distribution control system （DCS）. It discusses the design of the unit＇s control system,which involves a compressor system,a purification system （molecular sieving）, a turbo expansion system and an air separation system. The final part of the paper discusses the maintenance and future development of the ASU control system at Baosteel.
基金Sponsored by the Chinese National Foundation of Science Na 59875058.
文摘Firstly data standardization technology and combined classification method have been applied to carry out classification of kinematic behaviors and mechanisms in the mapping field between the kinematic behavior level and the mechanism level of conceptual design.The principle of computer coding and storing have been built to give a fast and broad selection of mechanisms that meets the requirements of basic motion characters.Then on the basis of mentioned above,the heuristic matching propagation principle (HMPP) of kinematic behaviors and its true table serves as a guide to perform mechanism types selection.Finally an application is given to indicate its practicability and effectiveness.
文摘At the beginning of 21st century, with the rapid and steady development of China economy, a lot of large scale hydropower projects with large dams from 200 m to 300 m high are being or to be built. China dam constructions are reaching the level of 300 m high arch dam, 250 high CFRD (concrete face rockfill dam) and 200 m high RCC (roller compacted concrete) gravity dam. Due to the safety and the economy, the type selection for high dams has become the key issue during the argumentation for the hydropower projects, and further efforts are still needed in this aspect for high dams. After reviewing the high dam constructions in China and abroad, authors proposed some advices for the selection of dam types, and hope that it can provide some helpful information for the researches and the design of high dams.
文摘With rapid development of nuclear power in China, in view of reactor type selection, this paper analyzes the current situation that faces nuclear power industry, the technical characteristics of optional reactors and the tendency of nuclear power technology development in the future. The proposals put forward in this paper include choosing and introducing GW-class advanced PWR as main reactors, carrying out self-supporting projects and technical transfer negotiations, in addition, promoting the design of the advanced generation-Ⅱ PWR and initiating small-scaled construction. The ultimate target is to catch up with the world advanced level by means of technical upgrading and recreation based on technology importation and assimilation.
文摘The type selection of burning equipment for boilers is affected significantly by the slagging characteristics of coal. Based on the engineering statistics method, the designed furnace parameters are obtained from the 600-MW and 1 000-MW boilers with tangential firing and wall firing. The power and arrangement of the burners are analyzed. Their impacts on slagging on heating surfaces and the carbon contents in the ash and cinders are also discussed. Thermal parameters of furnace are recommended for boilers of 600 MW and 1 000 MW firing slagging coal in the design. The static or rotary classifier should be the first choice for the pulverizing system.
文摘When designing and selecting burning equipment for low volatile coal fired boilers,the primary concerns are about coal ignition and burnout.The characteristics of ignition and burnout are analyzed for low volatile coal and the technical measures are discussed for enhancing the combustion and burnout.The adaptability of tangential firing,wall firing and double-arch firing for low volatile coal is studied.Based on the statistic analysis for the main design parameters of domestic low volatile coal fired boilers with tangential firing,wall firing or double-arch W flame firing,the thermal performance for various boiler furnaces is recommended.The combustion systems for different types of boilers are also put forward for coals with different volatiles.
文摘The special design for the furnace and burner of boilers burning lignite is analyzed and the type selection of the pulverizing system is discussed by taking account of the lignite’s characteristics of high moisture, low heating value and low ash fusion temperature. The impact of such characteristics on the type selection of burning equipment and pulverizing systems for the lignite boiler is studied. The value ranges of the furnace characteristic parameters for the lignite boiler are recommended. For the old lignite, the premix period in the burner should not be too long in order to avoid slagging and the velocity of the primary air is suggested to be between 17 m/s and 22 m/s. The direct-flow burner with tangential firing is preferred for lignite with the moisture higher than 35%. The medium-speed mill is better to be used for lignite with the moisture less than 35%, while for lignite with the moisture higher than 40% the fan mill should be the first choice.
基金China Postdoctoral Science Foundation(No.20100481307)Natural Science Foundation of Shanxi(No.2009011018-3)
文摘This paper has concluded six features that belong to passenger vehicle types based on genetic algorithm(GA)of feature selection.We have obtained an optimal feature subset,including length,ratio of width and length,and ratio of height and length.And then we apply this optimal feature subset as well as another feature set,containing length,width and height,to the network input.Back-propagation(BP)neural network and support vector machine(SVM)are applied to classify the passenger vehicle type.There are four passenger vehicle types.This paper selects 400 samples of passenger vehicles,among which 320 samples are used as training set(each class has 80 samples)and the other 80 samples as testing set,taking the feature of the samples as network input and taking four passenger vehicle types as output.For the test,we have applied BP neural network to choose the optimal feature subset as network input,and the results show that the total classification accuracy rate can reach 96%,and the classification accuracy rate of first type can reach 100%.In this condition,we obtain a conclusion that this algorithm is better than the traditional ones[9].
基金Supported by Key Project of National Social Science Foundation(10AGL007&12ASH004)Key Project of Ministry of Education(DFA100209)+2 种基金Ph.D.Foundation Project of Southwest University(SWU1209338)Fundamental Research Funds for the Central Universities in 2013(SWU1309315)Fundamental Research Funds for the Central Universities in 2009(SWU0909629)
文摘New type professional farmers are farmers who possess certain resources and capitals,have certain extent of spirit of entrepreneurship,and are fully capable of obtaining and allocating resources related to agricultural production and management,and engaged in agricultural production and management for obtaining average profit.Cultivation of new type professional farmers should be promoted in the process and at the background of"coordinated development of industrialization,informationization,urbanization and agricultural modernization".It should establish a proper cultivation subject system consisting of government,enterprises,rural communities and nonprofit organizations.Relying on multiple motive forces,efforts should be concentrated on cultivating those farmers with enterprising,highly innovative and learning ability,to guide traditional farmers to change into learning,enterprising and innovative ones.In addition,cultivation of new type professional farmers must rely on farmer education and training,modern agricultural development,increase in agricultural comparative advantage,innovation of rural management system and mechanism,multiple types of agricultural operation on a fairly large scale,as well as construction and regulation of new rural communities.Finally,it is recommended to provide system guarantee from long-term input mechanism of new type professional farmer education and training,incentive and restrictive mechanism of new type professional farmer cultivation,and construction of favorable environment for agricultural entrepreneurship.
文摘Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was studied with 100 crosses derived from 10 sterile lines × 10 restorer lines. There was a complex relationship between parts of the traits of the two aspects. The angle of the 2nd leaf from the top and single panicle weight played important roles in plant type system and amylose content and grain length in grain quality system. The angle of the 2nd leaf from the top, plant height and single panicle weight had a great effect on grain quality traits, and amylose content, brown rice rate and translucency were easily influenced by plant type traits. Selection index model indicated that japonica hybrid rice in Northern China with good quality was characterized by broad flag leaf and 2nd leaf from the top, narrow and short 3rd leaf from the top, low plant height, short culm, long and more panicles and low single panicle weight.
基金supported by the National Major Special Project of China on New Varieties Cultivation for Transgenic Organisms (2009ZX08009-146B)by the National Non-profit Institute Research Grant,China (2012cj-2)
文摘This gene pyramiding strategy is based on the idea of efficiently pyramiding genes of interest by crosses and selection to obtain a population with favorable alleles from different breeds or lines, which is called an ideal population. We investigate impacts of some factors on the pyramiding efficiencies by simulation. These factors include selection strategies （the breeding value selection, the molecular scores selection and the index selection）, proportion selected （2, 10 and 20%）, recombination rates between adjacent target genes （0.1, 0.3 and 0.5） and different mating types （the random mating and the positive assortative mating avoiding sib mating）. The results show that： （1） The more recombination rate and the lower proportion male selected, the better pyramiding efficiency; （2） the ideal population is obtained via various selection strategies, while different selection strategies are suitable for different breeding objectives. From the perspective of pyramiding target genes merely, the molecular scores selection is the best one, for the purpose of pyramiding target genes and recovering genetic background of the target trait, the index selection is the best one, while from the saving cost point of view, the breeding value selection is the best one; （3） the positive assortative mating is more efficient for gene pyramiding compared with the random mating in the terms of the number of generations of intercross for getting the ideal population.
文摘On the basis of Part (Ⅰ) of this series some applications to the approximation of set_valued functions are obtained: Korovkin type theorems, a method to extend classical approximation operators to the set_valued setting and a Jackson type estimate.
文摘In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign methods for choosing the pulverizing system for lignite boilers,it is suggested that the particle size of coal,the drying time,the drying temperature and the humidity should be taken into account when measuring the free moisture of lignite,and the total moisture could also be the principle for type selection of pulverizer for lignite boilers.Furthermore,the determination of pulverized-coal moisture has great influence on the running of pulverizing systems.The actual moisture of certain pulverized coals is compared with that calculated with different methods and a feasible method for determining the moisture of the pulverized coal is suggested.
文摘This paper mainly introduces the calculation and selection process of the feed mechanism of the truss manipulator. According to the handling load, beat and handling accuracy required by the production line, the three shaft transmission mechanism of the truss is calculated and selected.
