Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability an...Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.展开更多
The effects of the structure and concentration of impurities on the alkylation of naphthalene with 1-octene catalyzed by chloroaluminate ionic liquid(IL)were investigated.The presence of impurities containing oxygen a...The effects of the structure and concentration of impurities on the alkylation of naphthalene with 1-octene catalyzed by chloroaluminate ionic liquid(IL)were investigated.The presence of impurities containing oxygen and nitrogen led to a decrease in the catalytic performance of chloroaluminate IL.As the water concentration increased to 65 mg·g^(-1),the total selectivity of multi-octylnaphthalene gradually decreased to 42.33%,and the average friction coefficient of the multi-octylnaphthalene base oil gradually increased to 0.201.When the concentration of impurities increased to a critical value,the chloroaluminate IL began to deactivate,leading to a decrease in naphthalene conversion.The critical concentrations for ethanolamine,water,methanol,ether,and diisopentyl sulfide were 33 mg·g^(-1),65 mg·g^(-1),67mg·g^(-1),87 mg·g^(-1),and 123 mg·g^(-1),respectively.Impurities with higher basicity resulted in an earlier onset of chloroaluminate IL deactivation.The changes of Lewis and Brønsted acids in chloroaluminate IL under the influence of impurities were investigated using in situ IR and 27Al NMR spectroscopy.2,6-dimethylpyridine as an indicator could detect the changes of Brønsted acid in chloroaluminate IL better,but the changes of Lewis acid were not obvious because of the overlap between the characteristic peaks.2,6-dichloropyridine as an indicator could exclusively detect the changes of Lewis acid in chloroaluminate IL.With the increase inwater concentration,the Lewis acid in chloroaluminate IL was continuously consumed and converted into Brønsted acid,and the Lewis acid gradually decreased,while the Brønsted acid showed a change of increasing first and then decreasing.展开更多
Triboelectric nanogenerators(TENGs)offer a selfsustaining power solution for marine regions abundant in resources but constrained by energy availability.Since their pioneering use in wave energy harvesting in 2014,nea...Triboelectric nanogenerators(TENGs)offer a selfsustaining power solution for marine regions abundant in resources but constrained by energy availability.Since their pioneering use in wave energy harvesting in 2014,nearly a decade of advancements has yielded nearly thousands of research articles in this domain.Researchers have developed various TENG device structures with diverse functionalities to facilitate their commercial deployment.Nonetheless,there is a gap in comprehensive summaries and performance evaluations of TENG structural designs.This paper delineates six innovative structural designs,focusing on enhancing internal device output and adapting to external environments:high space utilization,hybrid generator,mechanical gain,broadband response,multi-directional operation,and hybrid energy-harvesting systems.We summarize the prevailing trends in device structure design identified by the research community.Furthermore,we conduct a meticulous comparison of the electrical performance of these devices under motorized,simulated wave,and real marine conditions,while also assessing their sustainability in terms of device durability and mechanical robustness.In conclusion,the paper outlines future research avenues and discusses the obstacles encountered in the TENG field.This review aims to offer valuable perspectives for ongoing research and to advance the progress and application of TENG technology.展开更多
We highly commend Dr Souza et al.1for their systematic review research.The authors conducted a detailed investigation into the effects of ischemic preconditioning(IPC)on athletic performance,comparing it with placebo ...We highly commend Dr Souza et al.1for their systematic review research.The authors conducted a detailed investigation into the effects of ischemic preconditioning(IPC)on athletic performance,comparing it with placebo and no-intervention conditions.The study found that while IPC demonstrated superior effects over the no-intervention group in certain metrics(e.g.,time to exhaustion),its performance did not significantly surpass that of the placebo group.This suggests that the potential benefits of IPC may partially stem from participants’psychological expectations,or placebo effects.The study also highlighted the significant impact of placebo interventions on athletic performance,emphasizing the importance of distinguishing between placebo and no-intervention conditions in experimental designs.展开更多
In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the i...In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the interference signal determines interference cancellation performance,while the auxiliary antenna array affects the correlation by influencing the amplitude and phase of the reference signals.This paper analyzes the effect of auxiliary antenna array on multiple performances of wideband noncooperative interference cancellation.Firstly,the array received signal model of wideband interference is established,and the weight vector coupled with the auxiliary antennas array manifold is solved by spectral analysis and eigen-subspace decomposition.Then,multiple performances which include cancellation resolution,grating null,wideband interference cancellation ratio(ICR),and convergence rate are quantitatively characterized with the auxiliary antenna array.It is obtained through analysis that the performances mutually restrict the auxiliary antenna array.Higher cancellation resolution requires larger array aperture,but when the number of auxiliary antennas is fixed,larger array aperture results in more grating nulls.When the auxiliary antennas are closer to the main antenna,the wideband ICR is improved,but the convergence rate is reduced.The conclusions are verified through simulation of one-dimensional uniform array and two-dimensional nonuniform array.The experiments of three arrays are compared,and the results conform well with simulation and support the theoretical analysis.展开更多
We sincerely thank the authors of the commentary1 for their thoughtful analysis and constructive critique of our systematic review on ischemic preconditioning(IPC)and placebo effects in exercise capacity and athletic ...We sincerely thank the authors of the commentary1 for their thoughtful analysis and constructive critique of our systematic review on ischemic preconditioning(IPC)and placebo effects in exercise capacity and athletic performance.2Their attention to methodological details,particularly concerning the inclusion and timing of warm-up protocols across studies,is commendable and contributes meaningfully to the ongoing refinement of IPC research in sports science.展开更多
A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modifie...A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modified reaction acceleration method is adopted and validated in the three-dimensional model. Seven ground motions are selected and the peak ground acceleration is adjusted to 0.2 g, 0.4 g and 0.6 g. The impact of the void ratio and thickness of the porous shock absorption layer is studied, while the surrounding rock grade and tunnel depth are also investigated. The numerical results show that the porous shock absorption layer has good shock absorption performance and can effectively reduce the maximum internal force of the secondary lining, but it cannot reduce the maximum horizontal relative displacement of the secondary lining. The circumferential rubber strip in the porous shock absorption layer will reduce shock absorption performance. The results of parameter analysis indicate that the shock absorption performance of the porous shock absorption layer increases with the increase of the void ratio and thickness, and it has good shock absorption performance under different surrounding rock grades and tunnel depths.展开更多
Due to uncertainties in seismic pipeline damage and post-earthquake recovery processes,probabilistic characteristics such as mean value,standard deviation,probability density function,and cumulative distribution funct...Due to uncertainties in seismic pipeline damage and post-earthquake recovery processes,probabilistic characteristics such as mean value,standard deviation,probability density function,and cumulative distribution function provide valuable information.In this study,a simulation-based framework to evaluate these probabilistic characteristics in water distribution systems(WDSs)during post-earthquake recovery is developed.The framework first calculates pipeline failure probabilities using seismic fragility models and then generates damage samples through quasi-Monte Carlo simulations with Sobol’s sequence for faster convergence.System performance is assessed using a hydraulic model,and recovery simulations produce time-varying performance curves,where the dynamic importance of unrepaired damage determines repair sequences.Finally,the probabilistic characteristics of seismic performance indicators,resilience index,resilience loss,and recovery time are evaluated.The framework is applied in two benchmark WDSs with different layouts to investigate the probabilistic characteristics of their seismic performance and resilience.Application results show that the cumulative distribution function reveals the variations in resilience indicators for different exceedance probabilities,and there are dramatic differences among the recovery times corresponding to the system performance recovery targets of 80%,90%,and 100%.展开更多
This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrate...This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrated sensing and communication(ISAC)technique.Compared with vehicle-mounted radar,SBS has a better sensing field due to its higher deployment position,which can help solve the problem of sensing blind areas.In this paper,key technologies of SBS are studied,including the beamforming algorithm,beam scanning scheme,and interference cancellation algorithm.To transmit and receive ISAC signals simultaneously,a double-coupling antenna array is applied.The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions.The joint timespace-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS,including multiuser interference and duplex interference between sensing and communication.Finally,the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated.Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.展开更多
The performance of a direct-expansion ground-source heat pump（DX GSHP）system is theoretically analyzed.Compared with the conventional ground-source heat pump（GSHP）,the DX GSHP has a lower condensing temperature in...The performance of a direct-expansion ground-source heat pump（DX GSHP）system is theoretically analyzed.Compared with the conventional ground-source heat pump（GSHP）,the DX GSHP has a lower condensing temperature in the cooling mode and a higher evaporating temperature in the heating mode,and the ground heat exchanger（GHE）in the DX GSHP has a low thermal resistance.Therefore,the coefficient of performance（COP）of the DX GSHP is higher than that of the GSHP.In addition,the system performance of the DX GSHP system is higher than that of the conventional GSHP system because there are no secondary solution loops and water circulating pumps in the DX GSHP system.The experimental energy performance of the DX GSHP system is also investigated based on the actual operational data.The tested DX GSHP system is installed in Xiangtan,China.The U-vertical GHE of the DX GSHP is buried in a water well.The length and the outside nominal diameter of the GHE are 42 m and 12.7 mm,respectively.The experimental results show that the maximum（COP）and the average COP of the DX GSHP system in the heating mode are 5.95 and 4.72,respectively.展开更多
The network on chip（NoC）is used as a solution for the communication problems in a complex system on chip（SoC）design.To further enhance performances,the NoC architectures,a high level modeling and an evaluation met...The network on chip（NoC）is used as a solution for the communication problems in a complex system on chip（SoC）design.To further enhance performances,the NoC architectures,a high level modeling and an evaluation method based on OPNET are proposed to analyze their performances on different injection rates and traffic patterns.Simulation results for general NoC in terms of the average latency and the throughput are analyzed and used as a guideline to make appropriate choices for a given application.Finally,a MPEG4 decoder is mapped on different NoC architectures.Results prove the effectiveness of the evaluation method.展开更多
This paper presents RTSS simulation software with the capability for graphical model building and animation display. The RTSS simulation software consists of three separated parts: the simulation kernel, the model bui...This paper presents RTSS simulation software with the capability for graphical model building and animation display. The RTSS simulation software consists of three separated parts: the simulation kernel, the model building program and the result post processing program. The RTSS may run in the client/server mode. The main features of the RTSS software are more modular, more flexible and easier to upgrade. RTSS is built on object oriented technology, so it has more flexibility. The RTSS model of a system is an open queueing network. For modeling various data acquisition systems, communication networks and flexible manufacturing systems at different abstraction levels, RTSS has proven to be an extremely useful tool for performance analysis.展开更多
An analytical approach to evaluate the performance of the 3G/ad hoc integrated network is presented. A channel model capturing both path loss and shadowing is applied to the analysis so as to characterize power fallof...An analytical approach to evaluate the performance of the 3G/ad hoc integrated network is presented. A channel model capturing both path loss and shadowing is applied to the analysis so as to characterize power falloff vs. distance. The 3G/ad hoc integrated network scenario model is introduced briefly. Based on this model, several performances of the 3G/ ad hoc integrated network in terms of outage probability, call dropping probability and new call blocking probability are evaluated. The corresponding performance formulae are deduced in accordance with the analytical models. Meanwhile, the formula of the 3G/ad hoc integrated network capacity is deduced on the basis of the formula of the outage probability. It is observed from extensive simulation and numerical analysis that the 3G/ad hoc integrated network remarkably outperforms the 3G network with regards to the network performance. This derived evaluation approach can be applied into planning and optimization of the 3G/ad hoc network.展开更多
The present study investigated one Chinese college learner's requesting performance by analyzing the DCT data produced in four different situations.The results indicated that the learner favored the indirect strat...The present study investigated one Chinese college learner's requesting performance by analyzing the DCT data produced in four different situations.The results indicated that the learner favored the indirect strategy in all four situations,and was able to produce longer requests with a large portion of external modification.However,the learner lacked sufficient knowledge and ability to control over a wide range of internal modification,relied heavily on external modification,produced lengthy grounders,and failed to show enough sensitivity to imposition variation.展开更多
In this paper, using finite-time control method, we consider the disturbance analysis of a second-order system with unknown but bounded disturbance. We show that the states of the second-order system will be stabilize...In this paper, using finite-time control method, we consider the disturbance analysis of a second-order system with unknown but bounded disturbance. We show that the states of the second-order system will be stabilized to a region containing the origin. The radius of this region is determined by the control parameters and can be rendered as small as desired. The rigorous stability analysis is also given. Compared with the conventional PD control law, the finite-time control law yields a better disturbance rejection performance. Numerical simulation results show the effectiveness of the method.展开更多
Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimati...Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.展开更多
Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G t...Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G technologies, non-orthogonal multiple access(NOMA) has been used at relay node to transmit multiple messages simultaneously to multiple cell-edge users. In this paper, a Collaborative NOMA Assisted Relaying(CNAR) system for 5G is proposed by enabling the collaboration of source-relay(S-R) and relay-destination(R-D) NOMA links. The relay node of the CNAR decodes the message for itself from S-R NOMA signal and transmits the remaining messages to the multiple cell-edge users in R-D link. A simplified-CNAR(S-CNAR) system is then developed to reduce the relay complexity. The outage probabilities for both systems are analyzed by considering outage behaviors in S-R and R-D links separately. To guarantee the data rate, the optimal power allocation among NOMA users is achieved by minimizing the outage probability. The ergodic sum capacity in high SNR regime is also approximated. Our mathematical analysis and simulation results show that CNAR system outperforms existing transmission strategies and S-CNAR reaches similar performance with much lower complexity.展开更多
The current investigations primarily focus on using advanced suspensions to overcome the tradeo design of ride comfort and handling performance for mining vehicles. It is generally realized by adjusting spring sti nes...The current investigations primarily focus on using advanced suspensions to overcome the tradeo design of ride comfort and handling performance for mining vehicles. It is generally realized by adjusting spring sti ness or damping parameters through active control methods. However, some drawbacks regarding control complexity and uncertain reliability are inevitable for these advanced suspensions. Herein, a novel passive hydraulically interconnected suspension(HIS) system is proposed to achieve an improved ride-handling compromise of mining vehicles. A lumped-mass vehicle model involved with a mechanical–hydraulic coupled system is developed by applying the free-body diagram method. The transfer matrix method is used to derive the impedance of the hydraulic system, and the impedance is integrated to form the equation of motions for a mechanical–hydraulic coupled system. The modal analysis method is employed to obtain the free vibration transmissibilities and force vibration responses under di erent road excitations. A series of frequency characteristic analyses are presented to evaluate the isolation vibration performance between the mining vehicles with the proposed HIS and the conventional suspension. The analysis results prove that the proposed HIS system can e ectively suppress the pitch motion of sprung mass to guarantee the handling performance, and favorably provide soft bounce sti ness to improve the ride comfort. The distribution of dynamic forces between the front and rear wheels is more reasonable, and the vibration decay rate of sprung mass is increased e ectively. This research proposes a new suspension design method that can achieve the enhanced cooperative control of bounce and pitch motion modes to improve the ride comfort and handling performance of mining vehicles as an e ective passive suspension system.展开更多
Performance analysis and kinematic design of the 3-PUU pure translational parallel mechanism with vertical guide-ways are investigated. Two novel performance indices, the critical slider stroke and the main section ar...Performance analysis and kinematic design of the 3-PUU pure translational parallel mechanism with vertical guide-ways are investigated. Two novel performance indices, the critical slider stroke and the main section area of workspace, are defined; The expressions of two other indices, i.e. the global dexterity and global force transfer ratio are revised based on the main section of workspace. Using these indices, performance changes versus the varieties of dimensional parameters of mechanism are investigated in detail and the graphic descriptions of change tendencies of the performance indices are illustrated. By means of these obtained graphic descriptions, kinematic parameters for the 3-PUU pure translational parallel mechanism with better characteristics can be directly acquired.展开更多
Analysis of sensitivity of bioretention cell design elements to their hydrologic performances is meaningful in offering theoretical guidelines for proper design. Hydrologic performance of bioretention cells was facili...Analysis of sensitivity of bioretention cell design elements to their hydrologic performances is meaningful in offering theoretical guidelines for proper design. Hydrologic performance of bioretention cells was facilitated with consideration of four metrics： the overflow ratio, groundwater recharge ratio, ponding time, and runoff coefficients. The storm water management model （SWMM） and the bioretention infiltration model RECARGA were applied to generating runoff and outflow time series for calculation of hydrologic performance metrics. Using a parking lot to build a bioretention cell, as an example, the Morris method was used to conduct global sensitivity analysis for two groups of bioretention samples, one without underdrain and the other with underdrain. Results show that the surface area is the most sensitive element to most of the hydrologic metrics, while the gravel depth is the least sensitive element whether bioretention cells are installed with underdrain or not. The saturated infiltration rate of planting soil and the saturated infiltration rate of native soil are the other two most sensitive elements for bioretention cells without underdrain, while the saturated infiltration rate of native soil and underdrain size are the two most sensitive design elements for bioretention cells with underdrain.展开更多
基金supported by the Science and Technology Research and Development Plan of the China State Railway Group Company Limited(No.Q2023J012).
文摘Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.
基金financial support of the Scientific Research Funds of Huaqiao University (605-50Y17073)
文摘The effects of the structure and concentration of impurities on the alkylation of naphthalene with 1-octene catalyzed by chloroaluminate ionic liquid(IL)were investigated.The presence of impurities containing oxygen and nitrogen led to a decrease in the catalytic performance of chloroaluminate IL.As the water concentration increased to 65 mg·g^(-1),the total selectivity of multi-octylnaphthalene gradually decreased to 42.33%,and the average friction coefficient of the multi-octylnaphthalene base oil gradually increased to 0.201.When the concentration of impurities increased to a critical value,the chloroaluminate IL began to deactivate,leading to a decrease in naphthalene conversion.The critical concentrations for ethanolamine,water,methanol,ether,and diisopentyl sulfide were 33 mg·g^(-1),65 mg·g^(-1),67mg·g^(-1),87 mg·g^(-1),and 123 mg·g^(-1),respectively.Impurities with higher basicity resulted in an earlier onset of chloroaluminate IL deactivation.The changes of Lewis and Brønsted acids in chloroaluminate IL under the influence of impurities were investigated using in situ IR and 27Al NMR spectroscopy.2,6-dimethylpyridine as an indicator could detect the changes of Brønsted acid in chloroaluminate IL better,but the changes of Lewis acid were not obvious because of the overlap between the characteristic peaks.2,6-dichloropyridine as an indicator could exclusively detect the changes of Lewis acid in chloroaluminate IL.With the increase inwater concentration,the Lewis acid in chloroaluminate IL was continuously consumed and converted into Brønsted acid,and the Lewis acid gradually decreased,while the Brønsted acid showed a change of increasing first and then decreasing.
基金supported by the National Key R&D Project from Ministry of Science and Technology,China(2021YFA1201603)National Natural Science Foundation of China(52073032 and 52192611)the Fundamental Research Funds for the Central Universities.
文摘Triboelectric nanogenerators(TENGs)offer a selfsustaining power solution for marine regions abundant in resources but constrained by energy availability.Since their pioneering use in wave energy harvesting in 2014,nearly a decade of advancements has yielded nearly thousands of research articles in this domain.Researchers have developed various TENG device structures with diverse functionalities to facilitate their commercial deployment.Nonetheless,there is a gap in comprehensive summaries and performance evaluations of TENG structural designs.This paper delineates six innovative structural designs,focusing on enhancing internal device output and adapting to external environments:high space utilization,hybrid generator,mechanical gain,broadband response,multi-directional operation,and hybrid energy-harvesting systems.We summarize the prevailing trends in device structure design identified by the research community.Furthermore,we conduct a meticulous comparison of the electrical performance of these devices under motorized,simulated wave,and real marine conditions,while also assessing their sustainability in terms of device durability and mechanical robustness.In conclusion,the paper outlines future research avenues and discusses the obstacles encountered in the TENG field.This review aims to offer valuable perspectives for ongoing research and to advance the progress and application of TENG technology.
文摘We highly commend Dr Souza et al.1for their systematic review research.The authors conducted a detailed investigation into the effects of ischemic preconditioning(IPC)on athletic performance,comparing it with placebo and no-intervention conditions.The study found that while IPC demonstrated superior effects over the no-intervention group in certain metrics(e.g.,time to exhaustion),its performance did not significantly surpass that of the placebo group.This suggests that the potential benefits of IPC may partially stem from participants’psychological expectations,or placebo effects.The study also highlighted the significant impact of placebo interventions on athletic performance,emphasizing the importance of distinguishing between placebo and no-intervention conditions in experimental designs.
基金supported by the National Fund for Distinguished Young Scholars(52025072)the National Natural Science Foundation of China(52177012)the Foundation of National Key Laboratory of Science and Technology(614221722051301).
文摘In wideband noncooperative interference cancellation,the reference signals obtained through auxiliary antennas are weighted to cancel with the interference signal.The correlation between the reference signal and the interference signal determines interference cancellation performance,while the auxiliary antenna array affects the correlation by influencing the amplitude and phase of the reference signals.This paper analyzes the effect of auxiliary antenna array on multiple performances of wideband noncooperative interference cancellation.Firstly,the array received signal model of wideband interference is established,and the weight vector coupled with the auxiliary antennas array manifold is solved by spectral analysis and eigen-subspace decomposition.Then,multiple performances which include cancellation resolution,grating null,wideband interference cancellation ratio(ICR),and convergence rate are quantitatively characterized with the auxiliary antenna array.It is obtained through analysis that the performances mutually restrict the auxiliary antenna array.Higher cancellation resolution requires larger array aperture,but when the number of auxiliary antennas is fixed,larger array aperture results in more grating nulls.When the auxiliary antennas are closer to the main antenna,the wideband ICR is improved,but the convergence rate is reduced.The conclusions are verified through simulation of one-dimensional uniform array and two-dimensional nonuniform array.The experiments of three arrays are compared,and the results conform well with simulation and support the theoretical analysis.
文摘We sincerely thank the authors of the commentary1 for their thoughtful analysis and constructive critique of our systematic review on ischemic preconditioning(IPC)and placebo effects in exercise capacity and athletic performance.2Their attention to methodological details,particularly concerning the inclusion and timing of warm-up protocols across studies,is commendable and contributes meaningfully to the ongoing refinement of IPC research in sports science.
基金Science and Technology Plan Project of Xizang Autonomous Region,China under Grant No.XZ202501YD0007。
文摘A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modified reaction acceleration method is adopted and validated in the three-dimensional model. Seven ground motions are selected and the peak ground acceleration is adjusted to 0.2 g, 0.4 g and 0.6 g. The impact of the void ratio and thickness of the porous shock absorption layer is studied, while the surrounding rock grade and tunnel depth are also investigated. The numerical results show that the porous shock absorption layer has good shock absorption performance and can effectively reduce the maximum internal force of the secondary lining, but it cannot reduce the maximum horizontal relative displacement of the secondary lining. The circumferential rubber strip in the porous shock absorption layer will reduce shock absorption performance. The results of parameter analysis indicate that the shock absorption performance of the porous shock absorption layer increases with the increase of the void ratio and thickness, and it has good shock absorption performance under different surrounding rock grades and tunnel depths.
基金National Key R&D Program of China under Grant No.2022YFC3003600National Natural Science Foundation of China(NSFC)under Grant No.51978023。
文摘Due to uncertainties in seismic pipeline damage and post-earthquake recovery processes,probabilistic characteristics such as mean value,standard deviation,probability density function,and cumulative distribution function provide valuable information.In this study,a simulation-based framework to evaluate these probabilistic characteristics in water distribution systems(WDSs)during post-earthquake recovery is developed.The framework first calculates pipeline failure probabilities using seismic fragility models and then generates damage samples through quasi-Monte Carlo simulations with Sobol’s sequence for faster convergence.System performance is assessed using a hydraulic model,and recovery simulations produce time-varying performance curves,where the dynamic importance of unrepaired damage determines repair sequences.Finally,the probabilistic characteristics of seismic performance indicators,resilience index,resilience loss,and recovery time are evaluated.The framework is applied in two benchmark WDSs with different layouts to investigate the probabilistic characteristics of their seismic performance and resilience.Application results show that the cumulative distribution function reveals the variations in resilience indicators for different exceedance probabilities,and there are dramatic differences among the recovery times corresponding to the system performance recovery targets of 80%,90%,and 100%.
基金supported in part by the National Natural Science Foundation of China under Grant U21B2014,Grant 92267202,and Grant 62271081.
文摘This paper studies the sensing base station(SBS)that has great potential to improve the safety of vehicles and pedestrians on roads.SBS can detect the targets on the road with communication signals using the integrated sensing and communication(ISAC)technique.Compared with vehicle-mounted radar,SBS has a better sensing field due to its higher deployment position,which can help solve the problem of sensing blind areas.In this paper,key technologies of SBS are studied,including the beamforming algorithm,beam scanning scheme,and interference cancellation algorithm.To transmit and receive ISAC signals simultaneously,a double-coupling antenna array is applied.The free detection beam and directional communication beam are proposed for joint communication and sensing to meet the requirements of beamwidth and pointing directions.The joint timespace-frequency domain division multiple access algorithm is proposed to cancel the interference of SBS,including multiuser interference and duplex interference between sensing and communication.Finally,the sensing and communication performance of SBS under the industrial scientific medical power limitation is analyzed and simulated.Simulation results show that the communication rate of SBS can reach over 100 Mbps and the range of sensing and communication can reach about 500 m.
基金The National Key Technologies R&D Program of Chinaduring the 11th Five-Year Plan Period(No.2006BAJ04B04,2006BAJ04A05,2006BAJ04A13)
文摘The performance of a direct-expansion ground-source heat pump（DX GSHP）system is theoretically analyzed.Compared with the conventional ground-source heat pump（GSHP）,the DX GSHP has a lower condensing temperature in the cooling mode and a higher evaporating temperature in the heating mode,and the ground heat exchanger（GHE）in the DX GSHP has a low thermal resistance.Therefore,the coefficient of performance（COP）of the DX GSHP is higher than that of the GSHP.In addition,the system performance of the DX GSHP system is higher than that of the conventional GSHP system because there are no secondary solution loops and water circulating pumps in the DX GSHP system.The experimental energy performance of the DX GSHP system is also investigated based on the actual operational data.The tested DX GSHP system is installed in Xiangtan,China.The U-vertical GHE of the DX GSHP is buried in a water well.The length and the outside nominal diameter of the GHE are 42 m and 12.7 mm,respectively.The experimental results show that the maximum（COP）and the average COP of the DX GSHP system in the heating mode are 5.95 and 4.72,respectively.
基金Supported by the Natural Science Foundation of China(61076019)the China Postdoctoral Science Foundation(20100481134)+1 种基金the Natural Science Foundation of Jiangsu Province(BK2008387)the Graduate Student Innovation Foundation of Jiangsu Province(CX07B-105z)~~
文摘The network on chip（NoC）is used as a solution for the communication problems in a complex system on chip（SoC）design.To further enhance performances,the NoC architectures,a high level modeling and an evaluation method based on OPNET are proposed to analyze their performances on different injection rates and traffic patterns.Simulation results for general NoC in terms of the average latency and the throughput are analyzed and used as a guideline to make appropriate choices for a given application.Finally,a MPEG4 decoder is mapped on different NoC architectures.Results prove the effectiveness of the evaluation method.
文摘This paper presents RTSS simulation software with the capability for graphical model building and animation display. The RTSS simulation software consists of three separated parts: the simulation kernel, the model building program and the result post processing program. The RTSS may run in the client/server mode. The main features of the RTSS software are more modular, more flexible and easier to upgrade. RTSS is built on object oriented technology, so it has more flexibility. The RTSS model of a system is an open queueing network. For modeling various data acquisition systems, communication networks and flexible manufacturing systems at different abstraction levels, RTSS has proven to be an extremely useful tool for performance analysis.
基金The National Natural Science Foundation of China(No.60872004)the Research Fund of National Mobile Communications Research Laboratory of Southeast University(No.2010A08)the Fundamental Research Funds for the Central Universities(No.2009B21814)
文摘An analytical approach to evaluate the performance of the 3G/ad hoc integrated network is presented. A channel model capturing both path loss and shadowing is applied to the analysis so as to characterize power falloff vs. distance. The 3G/ad hoc integrated network scenario model is introduced briefly. Based on this model, several performances of the 3G/ ad hoc integrated network in terms of outage probability, call dropping probability and new call blocking probability are evaluated. The corresponding performance formulae are deduced in accordance with the analytical models. Meanwhile, the formula of the 3G/ad hoc integrated network capacity is deduced on the basis of the formula of the outage probability. It is observed from extensive simulation and numerical analysis that the 3G/ad hoc integrated network remarkably outperforms the 3G network with regards to the network performance. This derived evaluation approach can be applied into planning and optimization of the 3G/ad hoc network.
文摘The present study investigated one Chinese college learner's requesting performance by analyzing the DCT data produced in four different situations.The results indicated that the learner favored the indirect strategy in all four situations,and was able to produce longer requests with a large portion of external modification.However,the learner lacked sufficient knowledge and ability to control over a wide range of internal modification,relied heavily on external modification,produced lengthy grounders,and failed to show enough sensitivity to imposition variation.
基金supported by National Natural Science Foundation of China (No.60504007)the PhD Programs Foundation of Ministry of Educationof China (No.20070286040)the Scientific Research Foundation of Graduate School of Southeast University
文摘In this paper, using finite-time control method, we consider the disturbance analysis of a second-order system with unknown but bounded disturbance. We show that the states of the second-order system will be stabilized to a region containing the origin. The radius of this region is determined by the control parameters and can be rendered as small as desired. The rigorous stability analysis is also given. Compared with the conventional PD control law, the finite-time control law yields a better disturbance rejection performance. Numerical simulation results show the effectiveness of the method.
基金supported by the National Natural Science Foundation of China(No.61671273)
文摘Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.
文摘Serving multiple cell-edge mobile terminals poses multifaceted challenges due to the increased transmission power and interferences, which could be overcome by relay communications. With the recent advancement of 5G technologies, non-orthogonal multiple access(NOMA) has been used at relay node to transmit multiple messages simultaneously to multiple cell-edge users. In this paper, a Collaborative NOMA Assisted Relaying(CNAR) system for 5G is proposed by enabling the collaboration of source-relay(S-R) and relay-destination(R-D) NOMA links. The relay node of the CNAR decodes the message for itself from S-R NOMA signal and transmits the remaining messages to the multiple cell-edge users in R-D link. A simplified-CNAR(S-CNAR) system is then developed to reduce the relay complexity. The outage probabilities for both systems are analyzed by considering outage behaviors in S-R and R-D links separately. To guarantee the data rate, the optimal power allocation among NOMA users is achieved by minimizing the outage probability. The ergodic sum capacity in high SNR regime is also approximated. Our mathematical analysis and simulation results show that CNAR system outperforms existing transmission strategies and S-CNAR reaches similar performance with much lower complexity.
基金Supported by National Natural Science Foundation of China(Grant Nos.51805155,51675152)Foundation for Innovative Research Groups of National Natural Science Foundation of China(Grant No.51621004)Open Fund in the State Key Laboratory of Advanced Design and Manufacture for Vehicle Body(Grant No.71575005)
文摘The current investigations primarily focus on using advanced suspensions to overcome the tradeo design of ride comfort and handling performance for mining vehicles. It is generally realized by adjusting spring sti ness or damping parameters through active control methods. However, some drawbacks regarding control complexity and uncertain reliability are inevitable for these advanced suspensions. Herein, a novel passive hydraulically interconnected suspension(HIS) system is proposed to achieve an improved ride-handling compromise of mining vehicles. A lumped-mass vehicle model involved with a mechanical–hydraulic coupled system is developed by applying the free-body diagram method. The transfer matrix method is used to derive the impedance of the hydraulic system, and the impedance is integrated to form the equation of motions for a mechanical–hydraulic coupled system. The modal analysis method is employed to obtain the free vibration transmissibilities and force vibration responses under di erent road excitations. A series of frequency characteristic analyses are presented to evaluate the isolation vibration performance between the mining vehicles with the proposed HIS and the conventional suspension. The analysis results prove that the proposed HIS system can e ectively suppress the pitch motion of sprung mass to guarantee the handling performance, and favorably provide soft bounce sti ness to improve the ride comfort. The distribution of dynamic forces between the front and rear wheels is more reasonable, and the vibration decay rate of sprung mass is increased e ectively. This research proposes a new suspension design method that can achieve the enhanced cooperative control of bounce and pitch motion modes to improve the ride comfort and handling performance of mining vehicles as an e ective passive suspension system.
基金This project is supported by National Natural Science Foundation of China (No.60275031)Municipal Key Lab Open Fund of Beijing, China (No.KP01-072200384).
文摘Performance analysis and kinematic design of the 3-PUU pure translational parallel mechanism with vertical guide-ways are investigated. Two novel performance indices, the critical slider stroke and the main section area of workspace, are defined; The expressions of two other indices, i.e. the global dexterity and global force transfer ratio are revised based on the main section of workspace. Using these indices, performance changes versus the varieties of dimensional parameters of mechanism are investigated in detail and the graphic descriptions of change tendencies of the performance indices are illustrated. By means of these obtained graphic descriptions, kinematic parameters for the 3-PUU pure translational parallel mechanism with better characteristics can be directly acquired.
文摘Analysis of sensitivity of bioretention cell design elements to their hydrologic performances is meaningful in offering theoretical guidelines for proper design. Hydrologic performance of bioretention cells was facilitated with consideration of four metrics： the overflow ratio, groundwater recharge ratio, ponding time, and runoff coefficients. The storm water management model （SWMM） and the bioretention infiltration model RECARGA were applied to generating runoff and outflow time series for calculation of hydrologic performance metrics. Using a parking lot to build a bioretention cell, as an example, the Morris method was used to conduct global sensitivity analysis for two groups of bioretention samples, one without underdrain and the other with underdrain. Results show that the surface area is the most sensitive element to most of the hydrologic metrics, while the gravel depth is the least sensitive element whether bioretention cells are installed with underdrain or not. The saturated infiltration rate of planting soil and the saturated infiltration rate of native soil are the other two most sensitive elements for bioretention cells without underdrain, while the saturated infiltration rate of native soil and underdrain size are the two most sensitive design elements for bioretention cells with underdrain.
