Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To de...Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To decrease the control cost,based on ISC,several LFC problems are investigated for second-order MASs without and with time delay,respectively.Firstly,an intermittent sampled controller is designed,and a sufficient and necessary condition is derived,under which state errors between the leader and all the followers approach zero asymptotically.Considering that time delay is inevitable,a new protocol is proposed to deal with the time-delay situation.The error system’s stability is analyzed using the Schur stability theorem,and sufficient and necessary conditions for LFC are obtained,which are closely associated with the coupling gain,the system parameters,and the network structure.Furthermore,for the case where the current position and velocity information are not available,a distributed protocol is designed that depends only on the sampled position information.The sufficient and necessary conditions for LFC are also given.The results show that second-order MASs can achieve the LFC if and only if the system parameters satisfy the inequalities proposed in the paper.Finally,the correctness of the obtained results is verified by numerical simulations.展开更多
In this paper,we investigate the phenomena of electromagnetically induced transparency and the generation of second-order sideband in a Laguerre–Gaussian cavity optorotational system with a Kerr nonlinear medium.Usin...In this paper,we investigate the phenomena of electromagnetically induced transparency and the generation of second-order sideband in a Laguerre–Gaussian cavity optorotational system with a Kerr nonlinear medium.Using the perturbation method,we analyze the first-and second-order sideband generations in the output field from the system under the actions of a strong control field and a weak probe field.Numerical simulations show that the Kerr nonlinearity can lead to the occurrence of the asymmetric line shape in the transmission of the probe field.Comparing with traditional scheme for generating the second-order sideband,our spectral shape of the second-order sideband is amplified and becomes asymmetric,which has potential applications in precision measurement,high-sensitivity devices,and frequency conversion.展开更多
Polarization-dependent second harmonic generation is a widely utilized technique for characterizing symmetry.However,in collinear reflective geometry,the essential beam-splitting device significantly influences both t...Polarization-dependent second harmonic generation is a widely utilized technique for characterizing symmetry.However,in collinear reflective geometry,the essential beam-splitting device significantly influences both the polarization state of the fundamental and harmonic beams,thereby affecting the accuracy of the obtained second-order nonlinear susceptibility.Here,we propose a data correction method to solve this problem to obtain accurate secondorder nonlinear susceptibility.The feasibility and generality of the method are demonstrated through theoretical and experimental validation.展开更多
We theoretically study the effect of Kerr effect on the second-order nonlinearity induced transparency in a double-resonant optical cavity system.We show that in the presence of the Kerr effect,as the strength of the ...We theoretically study the effect of Kerr effect on the second-order nonlinearity induced transparency in a double-resonant optical cavity system.We show that in the presence of the Kerr effect,as the strength of the Kerr effect increases,the absorption curve exhibits an asymmetric-symmetric-asymmetric transition,and the zero absorption point shifts with the increase of the Kerr effect.Furthermore,by changing the strength of the Kerr effect,we can control the width of the transparent window,and the position of the zero-absorption point and meanwhile change the left and right width of the absorption peak.The asymmetry absorption curve can be employed to improve the quality factor of the cavity when the frequency detuning is tuned to be around the right peak.The simple dependence of the zeroabsorption point on the strength of Kerr effect suggests that the strength of Kerr effect can be measured by measuring the position of the zero-absorption point in a possible application.展开更多
To effectively extract multi-scale information from observation data and improve computational efficiency,a multi-scale second-order autoregressive recursive filter(MSRF)method is designed.The second-order autoregress...To effectively extract multi-scale information from observation data and improve computational efficiency,a multi-scale second-order autoregressive recursive filter(MSRF)method is designed.The second-order autoregressive filter used in this study has been attempted to replace the traditional first-order recursive filter used in spatial multi-scale recursive filter(SMRF)method.The experimental results indicate that the MSRF scheme successfully extracts various scale information resolved by observations.Moreover,compared with the SMRF scheme,the MSRF scheme improves computational accuracy and efficiency to some extent.The MSRF scheme can not only propagate to a longer distance without the attenuation of innovation,but also reduce the mean absolute deviation between the reconstructed sea ice concentration results and observations reduced by about 3.2%compared to the SMRF scheme.On the other hand,compared with traditional first-order recursive filters using in the SMRF scheme that multiple filters are executed,the MSRF scheme only needs to perform two filter processes in one iteration,greatly improving filtering efficiency.In the two-dimensional experiment of sea ice concentration,the calculation time of the MSRF scheme is only 1/7 of that of SMRF scheme.This means that the MSRF scheme can achieve better performance with less computational cost,which is of great significance for further application in real-time ocean or sea ice data assimilation systems in the future.展开更多
In the cascaded H-bridge inverter(CHBI)with supercapacitor and dc-dc stage,inherent second-order harmonic power flows through each submodule(SM),causing fluctuations in both the dc-link voltage and the dc-dc current.T...In the cascaded H-bridge inverter(CHBI)with supercapacitor and dc-dc stage,inherent second-order harmonic power flows through each submodule(SM),causing fluctuations in both the dc-link voltage and the dc-dc current.There exist limitations in handling these fluctuations at variable output frequencies when employing proportional-integral(PI)control to the dc-dc stage.This paper aims to coordinately control these second-order harmonic voltage and current fluctuations in the CHBI.The presented method configures a specific second-order harmonic voltage reference,equipped with a maximum voltage fluctuation constraint and a suitable phase,for the dc-dc stage.A PI-resonant controller is used to track the configured reference.This allows for regulating the second-order harmonic fluctuation in the average dc-link voltage among the SMs within a certain value.Importantly,the second-order harmonic fluctuation in the dc-dc current can also be reduced.Simulation and experimental results demonstrate the effectiveness of the presented method.展开更多
The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electrom...The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.展开更多
The intricate hierarchical structure of musculoskeletal tissues,including bone and interface tissues,necessitates the use of complex scaffold designs and material structures to serve as tissue-engineered substitutes.T...The intricate hierarchical structure of musculoskeletal tissues,including bone and interface tissues,necessitates the use of complex scaffold designs and material structures to serve as tissue-engineered substitutes.This has led to growing interest in the development of gradient bone scaffolds with hierarchical structures mimicking the extracellular matrix of native tissues to achieve improved therapeutic outcomes.Building on the anatomical characteristics of bone and interfacial tissues,this review provides a summary of current strategies used to design and fabricate biomimetic gradient scaffolds for repairing musculoskeletal tissues,specifically focusing on methods used to construct compositional and structural gradients within the scaffolds.The latest applications of gradient scaffolds for the regeneration of bone,osteochondral,and tendon-to-bone interfaces are presented.Furthermore,the current progress of testing gradient scaffolds in physiologically relevant animal models of skeletal repair is discussed,as well as the challenges and prospects of moving these scaffolds into clinical application for treating musculoskeletal injuries.展开更多
In this article we consider the asymptotic behavior of extreme distribution with the extreme value index γ>0 . The rates of uniform convergence for Fréchet distribution are constructed under the second-order ...In this article we consider the asymptotic behavior of extreme distribution with the extreme value index γ>0 . The rates of uniform convergence for Fréchet distribution are constructed under the second-order regular variation condition.展开更多
We combine gradient data from the Macao Science Satellite-1(MSS-1),CHAllenging Minisatellite Payload(CHAMP),Swarm-A,and Swarm-C satellites to develop a 110-degree lithospheric magnetic field model.We then comprehensiv...We combine gradient data from the Macao Science Satellite-1(MSS-1),CHAllenging Minisatellite Payload(CHAMP),Swarm-A,and Swarm-C satellites to develop a 110-degree lithospheric magnetic field model.We then comprehensively evaluate the performance of the model by power spectral comparisons,correlation analyses,sensitivity matrix assessments,and comparisons with existing lithospheric field models.Results showed that using near east–west gradient data from MSS-1 significantly enhances the model correlation in the spherical harmonic degree(N) range of 45–60 while also mitigating the decline in correlation at higher degrees(N > 60).Furthermore,the unique orbital characteristics of MSS-1 enable its gradient data to provide substantial contributions to modeling in the mid-to low-latitude regions.With continued data acquisition from MSS-1 and further optimization of data processing methods,the performance of the model is expected to improve.展开更多
Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was appli...Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was applied on a rare-earth addition bearing steel.And rolling contact fatigue behavior of treated samples was compared with that of as-received counterparts at different contacting stresses.The results demonstrated that a 700μm-thick gradient nanostructured surface layer is produced on samples by surface mechanical rolling treatment.The grain size decreases while the microhardness increases gradually with decreasing depth,reaching~23 nm and~10.2 GPa,respectively,at the top surface.Consequently,the rolling contact fatigue property is significantly enhanced.The characteristic life of treated samples is~3.2 times that of untreated counterparts according to Weibull curves at 5.6 GPa.Analyses of fatigue mechanisms demonstrated that the gradient nanostructured surface layer might not only retard material degradation and microcrack formation,but also prolong the steady-state elastic response stage under rolling contact fatigue.展开更多
The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the ...The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.展开更多
The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospher...The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.展开更多
In this paper,we propose a three-term conjugate gradient method for solving unconstrained optimization problems based on the Hestenes-Stiefel(HS)conjugate gradient method and Polak-Ribiere-Polyak(PRP)conjugate gradien...In this paper,we propose a three-term conjugate gradient method for solving unconstrained optimization problems based on the Hestenes-Stiefel(HS)conjugate gradient method and Polak-Ribiere-Polyak(PRP)conjugate gradient method.Under the condition of standard Wolfe line search,the proposed search direction is the descent direction.For general nonlinear functions,the method is globally convergent.Finally,numerical results show that the proposed method is efficient.展开更多
A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of wa...A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of water with varying concentrations of salt ions.The movement of these ions across a membrane generates electricity.However,the efficiency of these systems faces a challenge due to membrane performance degradation over time,often caused by channel blockages.One potential solution to enhance system efficiency is the use of nanofluidic membranes.These specialized membranes offer high ion exchange capacity,abundant ion sources,and customizable channels with varying sizes and properties.Graphene oxide(GO)-based membranes have emerged as particularly promising candidates in this regard,garnering significant attention in recent literature.This work provides a comprehensive overview of the literature surrounding GO membranes and their applications in RED systems.It also highlights recent advancements in the utilization of GO membranes within these systems.Finally,it explores the potential of these membranes to play a pivotal role in electricity generation within RED systems.展开更多
Perfect anomalous reflections have been demonstrated in optical phase gradient metasurfaces(PGMs),but they suffer from single-frequency(narrow-band)response due to the intrinsic limitation of natural geometric periodi...Perfect anomalous reflections have been demonstrated in optical phase gradient metasurfaces(PGMs),but they suffer from single-frequency(narrow-band)response due to the intrinsic limitation of natural geometric periodicity.Here,we provide both numerical and analytical evidence that a depth gradient metasurface can achieve discrete ultra-broadband perfect anomalous reflection in the microwave range in the absence of geometric periodicity.Remarkably,by adjusting the operating frequency of the incident wave,the same effect can be steadily obtained via a physically equivalent phase periodicity in the PGM.Based on this mechanism,a perfect retroreflector with a broadband response ranging from 1 GHz to 40 GHz is realized.Our work has promising applications in communication,source tracking,and military satellites.展开更多
The GH141 superalloy ring-rolled parts often face microstructural inhomogeneity during production.This work investigated the effect of post-dynamic recrystallization on the microstructural evolution of GH141 superallo...The GH141 superalloy ring-rolled parts often face microstructural inhomogeneity during production.This work investigated the effect of post-dynamic recrystallization on the microstructural evolution of GH141 superalloy after gradient thermal deformation to solve the problem of microstructural inhomogeneity.Compression tests involving double cone(DC)samples were conducted at various temperatures to assess the effect of gradient strain on internal grain microstructure variation,which ranged from the rim to the center of the samples.The results demonstrate considerable microstructural inhomogeneity induced by gradient strain in the DC samples.The delay in heat preservation facilitated post-dynamic recrystallization(PDRX)and promoted extensive recrystallization in the DC samples experiencing large gradient strain,which resulted in a homogeneous grain microstructure throughout the samples.During compression at a relatively low temperature,dynamic recrystallization(DRX)was predominantly driven by continuous dynamic recrystallization(CDRX).As the deformation temperature increased,the DRX mechanism changed from CDRX-dominated to being dominated by discontinuous dynamic recrystallization(DDRX).During the delay of the heat preservation process,PDRX was dominated by a static recrystallization mechanism,along with the occurrence of meta-dynamic recrystallization(MDRX)mechanisms.In addition,the PDRX mechanism of twin-induced recrystallization nucleation was observed.展开更多
The changes in strain gradient induced by grain boundaries are crucial for enhancing the plasticity of gradient magnesium(Mg)alloys.The change of strain distribution influence by grain boundaries during plastic deform...The changes in strain gradient induced by grain boundaries are crucial for enhancing the plasticity of gradient magnesium(Mg)alloys.The change of strain distribution influence by grain boundaries during plastic deformation of the gradient structure was examined.In this paper,the gradient structure AZ31 Mg-alloy plate with the surface fine grain(FG)to the center coarse grain(CG)was fabricated using hard plate rolling(HPR).The microstructure and strain distribution of Mg-alloy with a gradient structure were analyzed by electron backscatter diffraction(EBSD)and Digital image correlation(DIC)during uniaxial tensile.The findings indicate that the gradient structure sample(GS sample)displays a uniform strain distribution during the tensile process.Coarse-grain sample(CG sample)have obvious strain concentration,which leads to premature fracture.Based on EBSD characterization,low-angle grain boundaries(LAGBs)accumulates in the CG during plastic deformation.Orientation of CG tends to the(0001)basal.At the same time,the density of geometrically necessary dislocations(GNDs)inside CG has changed,which improves the Heterogeneous deformation induced(HDI)stress of gradient structure.During the uniaxial tensile,LAGBs accumulates in CG and changes the strain distribution of the gradient structure,which induces the accumulation of GNDs,and hence improving the properties of the GS Mg-alloy.These findings unveil the mechanism of strength-plasticity synergism of GS alloys from a new perspective and offer insights into the application of GS in Mg-alloys.展开更多
Gradient coil is an essential component of a magnetic resonance imaging(MRI)scanner.To achieve high spatial resolution and imaging speed,a high-efficiency gradient coil with high slew rate is required.In consideration...Gradient coil is an essential component of a magnetic resonance imaging(MRI)scanner.To achieve high spatial resolution and imaging speed,a high-efficiency gradient coil with high slew rate is required.In consideration of the safety and comfort of the patient,the mechanical stability,acoustic noise and peripheral nerve stimulation(PNS)are also need to be concerned for practical use.In our previous work,a high-efficiency whole-body gradient coil set with a hybrid cylindrical-planar structure has been presented,which offers significantly improved coil performances.In this work,we propose to design this transverse gradient coil system with transformed magnetic gradient fields.By shifting up the zero point of gradient fields,the designed new Y-gradient coil could provide enhanced electromagnetic performances.With more uniform coil winding arrangement,the net torque of the new coil is significantly reduced and the generated sound pressure level(SPL)is lower at most tested frequency bands.On the other hand,the new transverse gradient coil designed with rotated magnetic gradient fields produces considerably reduced electric field in the human body,which is important for the use of rapid MR sequences.It's demonstrated that a safer and patient-friendly design could be obtained by using transformed magnetic gradient fields,which is critical for practical use.展开更多
Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient ...Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient issue by employing dynamic offsets and shear force adjustment rolling(DS rolling)as an advanced rolling technique.The strain and stress distributions in Ta plates for DS rolling and symmetrical rolling processes were analyzed using Deform 3D software.Through-thickness textures and microstructures were characterized via electron backscatter diffraction.The results revealed that DS rolling effectively solved the problem of texture gradient by increasing the average shear strain from 0.05 to 0.56.In turn,the shear stress reduced the energy storage orientation dependence of{100}and{111}grains.Furthermore,DS rolling refined the recrystallized grains on an average of 30.9%.展开更多
基金supported by the National Natural Science Foundation of China under Grants 62476138 and 42375016.
文摘Continuous control protocols are extensively utilized in traditional MASs,in which information needs to be transmitted among agents consecutively,therefore resulting in excessive consumption of limited resources.To decrease the control cost,based on ISC,several LFC problems are investigated for second-order MASs without and with time delay,respectively.Firstly,an intermittent sampled controller is designed,and a sufficient and necessary condition is derived,under which state errors between the leader and all the followers approach zero asymptotically.Considering that time delay is inevitable,a new protocol is proposed to deal with the time-delay situation.The error system’s stability is analyzed using the Schur stability theorem,and sufficient and necessary conditions for LFC are obtained,which are closely associated with the coupling gain,the system parameters,and the network structure.Furthermore,for the case where the current position and velocity information are not available,a distributed protocol is designed that depends only on the sampled position information.The sufficient and necessary conditions for LFC are also given.The results show that second-order MASs can achieve the LFC if and only if the system parameters satisfy the inequalities proposed in the paper.Finally,the correctness of the obtained results is verified by numerical simulations.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174344 and 12175199)Foundation of Department of Science and Technology of Zhejiang Province(Grant No.2022R52047)。
文摘In this paper,we investigate the phenomena of electromagnetically induced transparency and the generation of second-order sideband in a Laguerre–Gaussian cavity optorotational system with a Kerr nonlinear medium.Using the perturbation method,we analyze the first-and second-order sideband generations in the output field from the system under the actions of a strong control field and a weak probe field.Numerical simulations show that the Kerr nonlinearity can lead to the occurrence of the asymmetric line shape in the transmission of the probe field.Comparing with traditional scheme for generating the second-order sideband,our spectral shape of the second-order sideband is amplified and becomes asymmetric,which has potential applications in precision measurement,high-sensitivity devices,and frequency conversion.
基金This work was supported by the National Natural Science Foundation of China(No.U2230203)the Fundamental Research Funds for the Central Universities.
文摘Polarization-dependent second harmonic generation is a widely utilized technique for characterizing symmetry.However,in collinear reflective geometry,the essential beam-splitting device significantly influences both the polarization state of the fundamental and harmonic beams,thereby affecting the accuracy of the obtained second-order nonlinear susceptibility.Here,we propose a data correction method to solve this problem to obtain accurate secondorder nonlinear susceptibility.The feasibility and generality of the method are demonstrated through theoretical and experimental validation.
基金Supported by the Key Scientific Research Plan of Colleges and Universities in Henan Province(23B140006)the National Natural Science Foundation of China(11965017)。
文摘We theoretically study the effect of Kerr effect on the second-order nonlinearity induced transparency in a double-resonant optical cavity system.We show that in the presence of the Kerr effect,as the strength of the Kerr effect increases,the absorption curve exhibits an asymmetric-symmetric-asymmetric transition,and the zero absorption point shifts with the increase of the Kerr effect.Furthermore,by changing the strength of the Kerr effect,we can control the width of the transparent window,and the position of the zero-absorption point and meanwhile change the left and right width of the absorption peak.The asymmetry absorption curve can be employed to improve the quality factor of the cavity when the frequency detuning is tuned to be around the right peak.The simple dependence of the zeroabsorption point on the strength of Kerr effect suggests that the strength of Kerr effect can be measured by measuring the position of the zero-absorption point in a possible application.
基金The National Key Research and Development Program of China under contract No.2023YFC3107701the National Natural Science Foundation of China under contract No.42375143.
文摘To effectively extract multi-scale information from observation data and improve computational efficiency,a multi-scale second-order autoregressive recursive filter(MSRF)method is designed.The second-order autoregressive filter used in this study has been attempted to replace the traditional first-order recursive filter used in spatial multi-scale recursive filter(SMRF)method.The experimental results indicate that the MSRF scheme successfully extracts various scale information resolved by observations.Moreover,compared with the SMRF scheme,the MSRF scheme improves computational accuracy and efficiency to some extent.The MSRF scheme can not only propagate to a longer distance without the attenuation of innovation,but also reduce the mean absolute deviation between the reconstructed sea ice concentration results and observations reduced by about 3.2%compared to the SMRF scheme.On the other hand,compared with traditional first-order recursive filters using in the SMRF scheme that multiple filters are executed,the MSRF scheme only needs to perform two filter processes in one iteration,greatly improving filtering efficiency.In the two-dimensional experiment of sea ice concentration,the calculation time of the MSRF scheme is only 1/7 of that of SMRF scheme.This means that the MSRF scheme can achieve better performance with less computational cost,which is of great significance for further application in real-time ocean or sea ice data assimilation systems in the future.
基金supported by the National Key Research and Development Program of China under Grant 2023YFB2407400。
文摘In the cascaded H-bridge inverter(CHBI)with supercapacitor and dc-dc stage,inherent second-order harmonic power flows through each submodule(SM),causing fluctuations in both the dc-link voltage and the dc-dc current.There exist limitations in handling these fluctuations at variable output frequencies when employing proportional-integral(PI)control to the dc-dc stage.This paper aims to coordinately control these second-order harmonic voltage and current fluctuations in the CHBI.The presented method configures a specific second-order harmonic voltage reference,equipped with a maximum voltage fluctuation constraint and a suitable phase,for the dc-dc stage.A PI-resonant controller is used to track the configured reference.This allows for regulating the second-order harmonic fluctuation in the average dc-link voltage among the SMs within a certain value.Importantly,the second-order harmonic fluctuation in the dc-dc current can also be reduced.Simulation and experimental results demonstrate the effectiveness of the presented method.
基金support for this work by Key Research and Development Project of Henan Province(Grant.No.241111232300)the National Natural Science Foundation of China(Grant.No.52273085 and 52303113)the Open Fund of Yaoshan Laboratory(Grant.No.2024003).
文摘The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.
基金supported by the National Natural Science Foundation of China(Grant No.52473121,52403370 and 52221006)Fundamental Research Funds for the Central Universities(buctrc202020,buctrc202312).
文摘The intricate hierarchical structure of musculoskeletal tissues,including bone and interface tissues,necessitates the use of complex scaffold designs and material structures to serve as tissue-engineered substitutes.This has led to growing interest in the development of gradient bone scaffolds with hierarchical structures mimicking the extracellular matrix of native tissues to achieve improved therapeutic outcomes.Building on the anatomical characteristics of bone and interfacial tissues,this review provides a summary of current strategies used to design and fabricate biomimetic gradient scaffolds for repairing musculoskeletal tissues,specifically focusing on methods used to construct compositional and structural gradients within the scaffolds.The latest applications of gradient scaffolds for the regeneration of bone,osteochondral,and tendon-to-bone interfaces are presented.Furthermore,the current progress of testing gradient scaffolds in physiologically relevant animal models of skeletal repair is discussed,as well as the challenges and prospects of moving these scaffolds into clinical application for treating musculoskeletal injuries.
文摘In this article we consider the asymptotic behavior of extreme distribution with the extreme value index γ>0 . The rates of uniform convergence for Fréchet distribution are constructed under the second-order regular variation condition.
基金the support of the National Natural Science Foundation of China (Nos. 42250103, 41974073, and 41404053)the Macao Foundation and the preresearch project of Civil Aerospace Technologies (Nos. D020308 and D020303)funded by China’s National Space Administration, the Specialized Research Fund for State Key Laboratories。
文摘We combine gradient data from the Macao Science Satellite-1(MSS-1),CHAllenging Minisatellite Payload(CHAMP),Swarm-A,and Swarm-C satellites to develop a 110-degree lithospheric magnetic field model.We then comprehensively evaluate the performance of the model by power spectral comparisons,correlation analyses,sensitivity matrix assessments,and comparisons with existing lithospheric field models.Results showed that using near east–west gradient data from MSS-1 significantly enhances the model correlation in the spherical harmonic degree(N) range of 45–60 while also mitigating the decline in correlation at higher degrees(N > 60).Furthermore,the unique orbital characteristics of MSS-1 enable its gradient data to provide substantial contributions to modeling in the mid-to low-latitude regions.With continued data acquisition from MSS-1 and further optimization of data processing methods,the performance of the model is expected to improve.
基金The financial supports by the Chinese Academy of Sciences(Nos.XDC04030300 and XDB0510303)CAS-HK Joint Laboratory of Nanomaterials and MechanicsShenyang National Laboratory for Materials Science are acknowledged.
文摘Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was applied on a rare-earth addition bearing steel.And rolling contact fatigue behavior of treated samples was compared with that of as-received counterparts at different contacting stresses.The results demonstrated that a 700μm-thick gradient nanostructured surface layer is produced on samples by surface mechanical rolling treatment.The grain size decreases while the microhardness increases gradually with decreasing depth,reaching~23 nm and~10.2 GPa,respectively,at the top surface.Consequently,the rolling contact fatigue property is significantly enhanced.The characteristic life of treated samples is~3.2 times that of untreated counterparts according to Weibull curves at 5.6 GPa.Analyses of fatigue mechanisms demonstrated that the gradient nanostructured surface layer might not only retard material degradation and microcrack formation,but also prolong the steady-state elastic response stage under rolling contact fatigue.
基金supported by the National Key R&D Program of China(No.2022YFB2404400)the National Natural Science Foundation of China(Nos.U23A20577,52372168,92263206 and 21975006)+1 种基金the“The Youth Beijing Scholars program”(No.PXM2021_014204_000023)the Beijing Natural Science Foundation(Nos.2222001 and KM202110005009).
文摘The cobalt-free Mn-based Li-rich layered oxide material has the advantages of low cost,high energy density,and good performance at low temperatures,and is the promising choice for energy storage batteries.However,the long-cycling stability of batteries needs to be improved.Herein,the Mn-based Li-rich cathode materials with small amounts of Li2 MnO3 crystal domains and gradient doping of Al and Ti elements from the surface to the bulk have been developed to improve the structure and interface stability.Then the batteries with a high energy density of 600 Wh kg^(-1),excellent capacity retention of 99.7%with low voltage decay of 0.03 mV cycle^(-1) after 800 cycles,and good rates performances can be achieved.Therefore,the structure and cycling stability of low voltage Mn-based Li-rich cathode materials can be significantly improved by the bulk structure design and interface regulation,and this work has paved the way for developing low-cost and high-energy Mn-based energy storage batteries with long lifetime.
基金supported by the National Key R&D Program of China (Grant No.2022YFF0503700)the special funds of Hubei Luojia Laboratory (Grant No.220100011)+1 种基金supported by the International Space Science Institute–Beijing(ISSI-BJ) project“The Electromagnetic Data Validation and Scientific Application Research based on CSES Satellite”and ISSI/ISSI-BJ project,“Multi-Scale Magnetosphere–Ionosphere–Thermosphere Interaction.”
文摘The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.
基金Supported by the Science and Technology Project of Guangxi(Guike AD23023002)。
文摘In this paper,we propose a three-term conjugate gradient method for solving unconstrained optimization problems based on the Hestenes-Stiefel(HS)conjugate gradient method and Polak-Ribiere-Polyak(PRP)conjugate gradient method.Under the condition of standard Wolfe line search,the proposed search direction is the descent direction.For general nonlinear functions,the method is globally convergent.Finally,numerical results show that the proposed method is efficient.
基金Key Research and Development Program of Zhejiang Province,Grant/Award Number:2021C04019National Natural Science Foundation of China,Grant/Award Number:U20A20338Natural Science Foundation of Zhejiang Province,Grant/Award Number:LQ21H180012.
文摘A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of water with varying concentrations of salt ions.The movement of these ions across a membrane generates electricity.However,the efficiency of these systems faces a challenge due to membrane performance degradation over time,often caused by channel blockages.One potential solution to enhance system efficiency is the use of nanofluidic membranes.These specialized membranes offer high ion exchange capacity,abundant ion sources,and customizable channels with varying sizes and properties.Graphene oxide(GO)-based membranes have emerged as particularly promising candidates in this regard,garnering significant attention in recent literature.This work provides a comprehensive overview of the literature surrounding GO membranes and their applications in RED systems.It also highlights recent advancements in the utilization of GO membranes within these systems.Finally,it explores the potential of these membranes to play a pivotal role in electricity generation within RED systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.12274313,62275184,and 62411540033)Collaborative Innovation Center of Suzhou Nano Science and Technology,Suzhou Basic Research Project(Grant No.SJC2023003)+1 种基金the Gusu Leading Talent Plan for Scientific and Technological Innovation and Entrepreneurship(Grant No.ZXL2024400)the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘Perfect anomalous reflections have been demonstrated in optical phase gradient metasurfaces(PGMs),but they suffer from single-frequency(narrow-band)response due to the intrinsic limitation of natural geometric periodicity.Here,we provide both numerical and analytical evidence that a depth gradient metasurface can achieve discrete ultra-broadband perfect anomalous reflection in the microwave range in the absence of geometric periodicity.Remarkably,by adjusting the operating frequency of the incident wave,the same effect can be steadily obtained via a physically equivalent phase periodicity in the PGM.Based on this mechanism,a perfect retroreflector with a broadband response ranging from 1 GHz to 40 GHz is realized.Our work has promising applications in communication,source tracking,and military satellites.
基金supported by Shandong Provincial Natural Science Foundation of China(Nos.ZR2024JQ020 and ZR2021QE102)the Taishan Scholars Program of Shandong Province,China(Nos.tsqn202211115,tsqn201909081,and tsqn202306162)+2 种基金the National Natural Science Foundation of China(No.52274397)Yantai high-end talent introduction“Double Hundred Plan”,China(2021)the Graduate Innovation Foundation of Yantai University,China(No.KGIFYTU2520).
文摘The GH141 superalloy ring-rolled parts often face microstructural inhomogeneity during production.This work investigated the effect of post-dynamic recrystallization on the microstructural evolution of GH141 superalloy after gradient thermal deformation to solve the problem of microstructural inhomogeneity.Compression tests involving double cone(DC)samples were conducted at various temperatures to assess the effect of gradient strain on internal grain microstructure variation,which ranged from the rim to the center of the samples.The results demonstrate considerable microstructural inhomogeneity induced by gradient strain in the DC samples.The delay in heat preservation facilitated post-dynamic recrystallization(PDRX)and promoted extensive recrystallization in the DC samples experiencing large gradient strain,which resulted in a homogeneous grain microstructure throughout the samples.During compression at a relatively low temperature,dynamic recrystallization(DRX)was predominantly driven by continuous dynamic recrystallization(CDRX).As the deformation temperature increased,the DRX mechanism changed from CDRX-dominated to being dominated by discontinuous dynamic recrystallization(DDRX).During the delay of the heat preservation process,PDRX was dominated by a static recrystallization mechanism,along with the occurrence of meta-dynamic recrystallization(MDRX)mechanisms.In addition,the PDRX mechanism of twin-induced recrystallization nucleation was observed.
基金supported by the Natural Science Foundation of Heilongjiang Province(JQ2022E004)。
文摘The changes in strain gradient induced by grain boundaries are crucial for enhancing the plasticity of gradient magnesium(Mg)alloys.The change of strain distribution influence by grain boundaries during plastic deformation of the gradient structure was examined.In this paper,the gradient structure AZ31 Mg-alloy plate with the surface fine grain(FG)to the center coarse grain(CG)was fabricated using hard plate rolling(HPR).The microstructure and strain distribution of Mg-alloy with a gradient structure were analyzed by electron backscatter diffraction(EBSD)and Digital image correlation(DIC)during uniaxial tensile.The findings indicate that the gradient structure sample(GS sample)displays a uniform strain distribution during the tensile process.Coarse-grain sample(CG sample)have obvious strain concentration,which leads to premature fracture.Based on EBSD characterization,low-angle grain boundaries(LAGBs)accumulates in the CG during plastic deformation.Orientation of CG tends to the(0001)basal.At the same time,the density of geometrically necessary dislocations(GNDs)inside CG has changed,which improves the Heterogeneous deformation induced(HDI)stress of gradient structure.During the uniaxial tensile,LAGBs accumulates in CG and changes the strain distribution of the gradient structure,which induces the accumulation of GNDs,and hence improving the properties of the GS Mg-alloy.These findings unveil the mechanism of strength-plasticity synergism of GS alloys from a new perspective and offer insights into the application of GS in Mg-alloys.
基金supported by the Instrument Developing Project of Magnetic Resonance Union of Chinese Academy of Sciences,Grant No.2022GZL002.
文摘Gradient coil is an essential component of a magnetic resonance imaging(MRI)scanner.To achieve high spatial resolution and imaging speed,a high-efficiency gradient coil with high slew rate is required.In consideration of the safety and comfort of the patient,the mechanical stability,acoustic noise and peripheral nerve stimulation(PNS)are also need to be concerned for practical use.In our previous work,a high-efficiency whole-body gradient coil set with a hybrid cylindrical-planar structure has been presented,which offers significantly improved coil performances.In this work,we propose to design this transverse gradient coil system with transformed magnetic gradient fields.By shifting up the zero point of gradient fields,the designed new Y-gradient coil could provide enhanced electromagnetic performances.With more uniform coil winding arrangement,the net torque of the new coil is significantly reduced and the generated sound pressure level(SPL)is lower at most tested frequency bands.On the other hand,the new transverse gradient coil designed with rotated magnetic gradient fields produces considerably reduced electric field in the human body,which is important for the use of rapid MR sequences.It's demonstrated that a safer and patient-friendly design could be obtained by using transformed magnetic gradient fields,which is critical for practical use.
基金funded by the National Key Research and Development Program of China(No.2022YFB3705504)the Key Research and Development Program of Hebei Province,China(No.21310301D)+1 种基金the Central Government Guidance Fund for Local Science and Technology,China(No.226Z1003G)the Natural Science Foundation Innovation Group Funding Project of Hebei Province,China(No.E2021203011).
文摘Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient issue by employing dynamic offsets and shear force adjustment rolling(DS rolling)as an advanced rolling technique.The strain and stress distributions in Ta plates for DS rolling and symmetrical rolling processes were analyzed using Deform 3D software.Through-thickness textures and microstructures were characterized via electron backscatter diffraction.The results revealed that DS rolling effectively solved the problem of texture gradient by increasing the average shear strain from 0.05 to 0.56.In turn,the shear stress reduced the energy storage orientation dependence of{100}and{111}grains.Furthermore,DS rolling refined the recrystallized grains on an average of 30.9%.
