In this study, the microstructure and second-phase particles in yttrium （0.05 wt.%and 0.8 wt.%） bearing Fe-10Ni-7Mn steels were characterized. The results of X-ray analysis as well as scanning electron microscopy co...In this study, the microstructure and second-phase particles in yttrium （0.05 wt.%and 0.8 wt.%） bearing Fe-10Ni-7Mn steels were characterized. The results of X-ray analysis as well as scanning electron microscopy coupled with energy dispersive X-ray spectroscopy indicated the formation of （Fe, Ni, Mn）17Y2 precipitates with hexagonal structure in a Fe-10Ni-7Mn-0.8Y （wt.%） alloy. Lattice parameters of these precipitates were calculated as follows：a=0.8485 nm and c=0.8274 nm. Formation of Y2O3 sub-micron particles was also confirmed in both yttrium bearing steels via electrolytic phase extraction method. The effect of these precipitates on the prior austenite grain size was investigated. The results revealed that these precipitates had an effective role in controlling the prior austenite grain size.展开更多
The Ordovician fracture-vug carbonate reservoirs of Tarim Basin,are featured by developed vugs,caves and fractures.The strong heterogeneity results in huge uncertainty when these reservoirs are quantitatively characte...The Ordovician fracture-vug carbonate reservoirs of Tarim Basin,are featured by developed vugs,caves and fractures.The strong heterogeneity results in huge uncertainty when these reservoirs are quantitatively characterized using merely static seismic data.The effective quantitative characterization of the reservoirs has been an urgent problem to be solved.This study creatively proposes the"second quantitative characterization"technique with the combination of dynamic and static data based on the primary static quantitative characterization and fully considering lots of key influence factors when conducting characterization.In this technique,dynamic analysis methods such as well testing,production rate transient analysis,dynamic reserve evaluation and dynamic connectivity evaluation are used to get understandings on this kind of reservoir.These understandings are used as statistical parameters to constrain the inversion of seismic wave impedance to improve the relationship between wave impedance and porosity and determine the fracture-vug morphology,calculate dynamic reserves,and then a more accurate fracture-vugmodel can be selected and used to calculate the oil-water contact inversely based on the results of"second quantitative characterization".This method can lower the uncertainties in the primary quantitative characterization of fracture-vug reservoirs,enhance the accuracy of characterization results significantly,and has achieved good application results in the fracture-vug carbonate reservoirs of Tarim Basin.展开更多
In this paper, we characterize some simple Ka-groups only by using the group order and largest element orders, where a simple K4-group is a simple group of order containing exactly four distinct primes.
A nonlinear optical crystal of gamma glycine was grown by slow evaporation solution growth technique using deionized water and sodium acetate. The functional groups and vibrational frequencies were identified using FT...A nonlinear optical crystal of gamma glycine was grown by slow evaporation solution growth technique using deionized water and sodium acetate. The functional groups and vibrational frequencies were identified using FTIR spectral analysis. The cell parameters were determined from single crystal X-ray diffraction analysis. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study its thermal properties. The optical transmittance window and lower cutoff wavelength have been identified by UV-absorption spectrum analysis. Second harmonic generation (SHG) efficiency measurement was carried out by powder Kurtz method.展开更多
针对机载预警雷达空时自适应处理(space-time adaptive processing,STAP)所面临的异构杂波环境,基于杂波和噪声的联合稀疏特性提出了一种直接数据域(direct data domain,D3)STAP方法。首先通过子孔径平滑技术扩充训练样本集合;然后基于...针对机载预警雷达空时自适应处理(space-time adaptive processing,STAP)所面临的异构杂波环境,基于杂波和噪声的联合稀疏特性提出了一种直接数据域(direct data domain,D3)STAP方法。首先通过子孔径平滑技术扩充训练样本集合;然后基于杂波谱二阶表征理论构造STAP功率字典矩阵、导出目标函数,并解得待检测单元信号的空时功率谱;最后根据杂波先验信息重构无孔径损失的杂波加噪声协方差矩阵。数值实验验证了所提方法的协方差矩阵估计精度高于传统的稀疏恢复D3-STAP算法,且在理想情况和存在阵列误差的情况下,所提方法皆具备更好的低速目标检测性能。展开更多
文摘In this study, the microstructure and second-phase particles in yttrium （0.05 wt.%and 0.8 wt.%） bearing Fe-10Ni-7Mn steels were characterized. The results of X-ray analysis as well as scanning electron microscopy coupled with energy dispersive X-ray spectroscopy indicated the formation of （Fe, Ni, Mn）17Y2 precipitates with hexagonal structure in a Fe-10Ni-7Mn-0.8Y （wt.%） alloy. Lattice parameters of these precipitates were calculated as follows：a=0.8485 nm and c=0.8274 nm. Formation of Y2O3 sub-micron particles was also confirmed in both yttrium bearing steels via electrolytic phase extraction method. The effect of these precipitates on the prior austenite grain size was investigated. The results revealed that these precipitates had an effective role in controlling the prior austenite grain size.
基金Supported by the General Program of Natural Science Foundation of China(51874346).
文摘The Ordovician fracture-vug carbonate reservoirs of Tarim Basin,are featured by developed vugs,caves and fractures.The strong heterogeneity results in huge uncertainty when these reservoirs are quantitatively characterized using merely static seismic data.The effective quantitative characterization of the reservoirs has been an urgent problem to be solved.This study creatively proposes the"second quantitative characterization"technique with the combination of dynamic and static data based on the primary static quantitative characterization and fully considering lots of key influence factors when conducting characterization.In this technique,dynamic analysis methods such as well testing,production rate transient analysis,dynamic reserve evaluation and dynamic connectivity evaluation are used to get understandings on this kind of reservoir.These understandings are used as statistical parameters to constrain the inversion of seismic wave impedance to improve the relationship between wave impedance and porosity and determine the fracture-vug morphology,calculate dynamic reserves,and then a more accurate fracture-vugmodel can be selected and used to calculate the oil-water contact inversely based on the results of"second quantitative characterization".This method can lower the uncertainties in the primary quantitative characterization of fracture-vug reservoirs,enhance the accuracy of characterization results significantly,and has achieved good application results in the fracture-vug carbonate reservoirs of Tarim Basin.
基金Supported by the National Natural Science Foundation of China(Grant Nos.1117136411271301)+2 种基金the Natural Science Foundation Project of CQ CSTC(Grant No.2014jcyjA00004)the Science and Technology Project of Chongqing Education Committee(Grant No.KJ1400520)the Foundation Project of Chongqing Normal University(Grant No.14XYY026)
文摘In this paper, we characterize some simple Ka-groups only by using the group order and largest element orders, where a simple K4-group is a simple group of order containing exactly four distinct primes.
文摘A nonlinear optical crystal of gamma glycine was grown by slow evaporation solution growth technique using deionized water and sodium acetate. The functional groups and vibrational frequencies were identified using FTIR spectral analysis. The cell parameters were determined from single crystal X-ray diffraction analysis. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study its thermal properties. The optical transmittance window and lower cutoff wavelength have been identified by UV-absorption spectrum analysis. Second harmonic generation (SHG) efficiency measurement was carried out by powder Kurtz method.
文摘针对机载预警雷达空时自适应处理(space-time adaptive processing,STAP)所面临的异构杂波环境,基于杂波和噪声的联合稀疏特性提出了一种直接数据域(direct data domain,D3)STAP方法。首先通过子孔径平滑技术扩充训练样本集合;然后基于杂波谱二阶表征理论构造STAP功率字典矩阵、导出目标函数,并解得待检测单元信号的空时功率谱;最后根据杂波先验信息重构无孔径损失的杂波加噪声协方差矩阵。数值实验验证了所提方法的协方差矩阵估计精度高于传统的稀疏恢复D3-STAP算法,且在理想情况和存在阵列误差的情况下,所提方法皆具备更好的低速目标检测性能。
