To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and p...To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.展开更多
Mechanical failure of materials adjacent to the production cavity and material disaggregation caused by fluid drag are considered as the most important parameters that affect sand production.In light of such factors,t...Mechanical failure of materials adjacent to the production cavity and material disaggregation caused by fluid drag are considered as the most important parameters that affect sand production.In light of such factors,the coupling of two mechanisms-mechanical instability and hydrodynamic erosion-is indispensable in order to model this phenomenon successfully.This paper examines the applicability of a coupled hydro-mechanical erosion criterion for simulating sand production using the finite element method.The porous medium was considered fully saturated.The onset of sanding and production of sand were predicted by coupling mechanical failure and subsequent erosion of the grain particles utilizing a sanding model.To consider the erosion process,the Papamichos and Stavropoulou(1998)’s sand erosion criterion was incorporated into the finite element code.Arbitrary Lagrangian-Eulerian(ALE)adaptive mesh approach was used to account for large amounts of erosive material loss.Besides,in order to address the problem of severe mesh distortion,the“mesh mapping technique”was employed.Sand production in a horizontal wellbore and in a field case was simulated to demonstrate capabilities of the proposed model.In addition,principal parameters affecting sand production,including in situ stresses,cohesion,perforation orientation,and drawdown were examined.The results indicated the efficiency of the model used in evaluation of sanding in the field.Parametric studies indicated that in situ stresses and formation cohesion could be considered as dominant factors affecting the amount of sand production.展开更多
Aiming at the fracture of the bracket of sanding nozzle of CRH5 EMU bogie, the fatigue strength analysis and modal analysis of the bracket were conducted according to En13749 and BS7608 standards, and the track excita...Aiming at the fracture of the bracket of sanding nozzle of CRH5 EMU bogie, the fatigue strength analysis and modal analysis of the bracket were conducted according to En13749 and BS7608 standards, and the track excitation during the vehicle running was thoroughly analyzed. The cause leading to the fracture of the bracket was found and the bracket was redesigned.展开更多
True tri-axial sanding fracturing experiments are carried out on conglomerate samples from the Permian Wuerhe Formation of Mahu sag,Junggar Basin,to study hydraulic fracture propagation geometry and quartz sand transp...True tri-axial sanding fracturing experiments are carried out on conglomerate samples from the Permian Wuerhe Formation of Mahu sag,Junggar Basin,to study hydraulic fracture propagation geometry and quartz sand transport in ma-trix-supported fine conglomerate and grain-supported medium conglomerate.The effect of rough fracture surface on conduc-tivity is analyzed using the 3D-printing technology to reconstruct the rough surface formed in the fractured conglomerate.The hydraulic fractures formed in the matrix-supported fine conglomerate are fairly straight,and only more tortuous when en-countering large gravels at local parts;thus,proppants can get into the fractures easily with transport distance about 70%–90%of the fracture length.By contrast,in the grain-supported medium conglomerate,hydraulic fractures tend to bypass the gravels to propagate in tortuous paths and frequently change in width;therefore,proppants are difficult to transport in these fractures and only move less than 30%of the fracture length.As the ma trix-supported fine conglomerate has high matrix content and low hardness,proppants embed in the fracture surface severely.In contrast,the grain-supported medium conglomerate has higher gravel content and hardness,so the quartz sand is crushed more severely.Under the high proppant concentration of 5 kg/m^(2),when the closure stress is increased(above 60 MPa),fractures formed in both matrix-supported fine conglomerate and grain-supported medium conglomerate decrease in width significantly,and drop 88%and 92%in conductivity respectively compared with the case under the low closure stress of 20 MPa.The field tests prove that under high closure stress above 60 MPa,using a high proportion of fine proppants with high concentration allow the proppant to move further in the fracture;meanwhile proppant places more uniformly in the ro ugh fracture,resulting in a higher fracture conductivity and an improved well per-formance.展开更多
Sand production is a challenging issue in upstream oil and gas industry,causing operational and safety problems.Therefore,before drilling the wells,it is essential to predict and evaluate sanding onset of the wells.In...Sand production is a challenging issue in upstream oil and gas industry,causing operational and safety problems.Therefore,before drilling the wells,it is essential to predict and evaluate sanding onset of the wells.In this paper,new poroelastoplastic stress solutions around the perforation tunnel and tip based on the Mohr-Coulomb criterion are presented firstly.Based on the stress models,a tensile failure induced sanding onset prediction model for cased-perforated gas wells is derived.Then the analytical model is applied to field data to verify its applicability.The results from the perforation tip tensile failure induced sanding model are very close to field data.Therefore,this model is recommended for forecasting the critical conditions of sand production analysis.Such predictions are necessary for providing technical support for sand control decision-making and predicting the production condition at which sanding onset occurs.展开更多
The research method in this paper is based on the standard of American Society for Testing andMaterials (ASTM). Planing and sanding are selected to study the machining properties of E. urophylla × E.grandis plant...The research method in this paper is based on the standard of American Society for Testing andMaterials (ASTM). Planing and sanding are selected to study the machining properties of E. urophylla × E.grandis plantation wood. Moreover, the reasons for machining defects are analyzed. The results show E.urophylla × E. grandis planted in south China is a good species with a great potential for solid woodutilization.展开更多
This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conduc...This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conducted,and the microhardness of ITZ were analyzed to explain the differences in performance.The experimental results indicate that,when RS content is 50%,the drying shrinkage and creep strain of RSC is the smallest.This is attributed to the highest microhardness in the ITZ when the RS content is 50%.When the RS content is 100%,the shrinkage and creep strains increase due to the high water absorption of RS,which leads to the evaporation of additional water and the deterioration of the ITZ.As the water-binder ratio increases,the drying shrinkage and creep strain of RSC with different RS content increases.According to the EC2 specification and the CEB-FIP specification,the drying shrinkage and creep prediction models for RSC have been established.展开更多
Cyperus esculentus(C.esculentus),a desert-adapted plant species with both ecological and economic value,has been widely cultivated in northern China's sandy regions.However,limited studies have investigated the pe...Cyperus esculentus(C.esculentus),a desert-adapted plant species with both ecological and economic value,has been widely cultivated in northern China's sandy regions.However,limited studies have investigated the performance of composite shelterbelts that integrate C.esculentus.This study systematically evaluated five shelterbelt models—Populus euphratica(P.euphratica),P.euphratica–C.esculentus composite,P.euphratica–nylon net–C.esculentus composite,Tamarix chinensis(T.chinensis),and T.chinensis–C.esculentus composite—using wind tunnel experiments and field observations.Sediment flux was measured at a normalized downwind distance(x/h)of 5,where x refers to the distance from the front edge(upwind side)of the shelterbelt for upwind measurements,and the distance from the rear edge(downwind side)for downwind measurements,and h represents the canopy height.Wind velocity was measured at x/h of–2,–1,1,2,3,5,and 7,and sand flux was measured at x/h=5,under initial wind velocities of 8.0 and 12.0 m/s.The results indicated that the P.euphratica–nylon net–C.esculentus composite was the most effective in reducing wind velocity,followed by the P.euphratica–C.esculentus composite.In contrast,the P.euphratica and T.chinensis exhibited relatively weaker wind reduction capabilities.Regarding sand flux,under moderate wind velocity(8.0 m/s),both the P.euphratica–C.esculentus composite and P.euphratica–nylon net–C.esculentus composite demonstrated the lowest sand flux values.However,under high wind velocity(12.0 m/s),the P.euphratica–nylon net–C.esculentus composite significantly outperformed the other shelterbelt models in sand retention,highlighting its superior windbreak and sand fixation efficacy.Field observations further validated the windbreak and sand fixation effects of C.esculentus.Comparisons between the bare sand plot and C.esculentus plot within protective forests demonstrated that planting C.esculentus can provide substantial ecological benefits in windbreak and sand-fixation.These findings,reinforced by field observations,strengthen the wind tunnel experiment results and highlight the critical role of C.esculentus in enhancing the performance of composite shelterbelts for desert ecological restoration.展开更多
The utilization of discarded coral debris in cementitious material is a prominent research area for island construction projects.The aim of this study is to explore the use of environment-friendly cement and waste cor...The utilization of discarded coral debris in cementitious material is a prominent research area for island construction projects.The aim of this study is to explore the use of environment-friendly cement and waste coral sand in the preparation of coral mortar,while investigating its performance when exposed to a chloride environment.Three types of low-carbon cements were employed,such as rapid hardening sulphoaluminate(RCSA)cement,high belite sulphoaluminate(HBCSA)cement,and slag sulphoaluminate cement(SSC).The coulomb electric flux,mechanical properties,free chloride content,and mass change of the cement mortar under exposed to 3.5 wt%NaCl solution were examined at various time intervals.X-ray diffraction analysis was conducted to identify the mineral phases present in the mortar samples.The results demonstrate that the flexural and compressive strength of the mortar consistently increase throughout the 360 days chloride exposure period.Incorporating coral sand into SSC-based mortars enhances their compressive strength from day 28 up until day 360.However,it adversely affects the strength of HBCSA-based mortars.The behavior of mortars exposed to a chloride-rich environment is closely associated with the amount of C-S-H gel present within them.SSC generates a significant quantity of C-S-H gel which possesses a large specific surface area capable of absorbing more chloride ions thereby reducing their concentration within the mortar matrix as well as increasing its mass and improving resistance against chloride ion penetration.展开更多
We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent law...We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent laws of concrete mix design.Four models,including random forest,Cat Boost,XGBoost,and deep neural network,were trained.The experimental results demonstrate that the XGBoost model performs the best in predicting the strength of sea sand concrete.Its R^(2)value reached 0.9999,and evaluation indexes such as MAPE,RMSE,MAE,and MSE are superior to those of other models.The principal component analysis(PCA)was conducted to visually analyze the structure and distribution of the original feature data,and Pearson correlation coefficient analysis and Shapley additive explanation(SHAP)were utilized to explore the impact of input characteristics on the strength of sea sand concrete.SHAP analysis is more conducive to revealing the nonlinear effects of various characteristics on the model prediction results,especially that particle size of stone has significant impacts on the strength of sea sand concrete.In addition,experimental verification was carried out to confirm the accuracy of the optimized training model.These findings offer some insights for the future design and application of sea sand in high-performance marine and coastal infrastructure.展开更多
To study the durability of concrete in harsh environments in Northwest China,concrete was prepared with various durability-improving materials such as concrete anti-erosion inhibitor(SBT-TIA),acrylate polymer(AP),supe...To study the durability of concrete in harsh environments in Northwest China,concrete was prepared with various durability-improving materials such as concrete anti-erosion inhibitor(SBT-TIA),acrylate polymer(AP),super absorbent resin(SAP).The erosion mode and internal deterioration mechanism under salt freeze-thaw cycle and dry-wet cycle were explored.The results show that the addition of enhancing materials can effectively improve the resistance of concrete to salt freezing and sulfate erosion:the relevant indexes of concrete added with X-AP and T-AP are improved after salt freeze-thaw cycles;concrete added with SBTTIA shows optimal sulfate corrosion resistance;and concrete added with AP displays the best resistance to salt freezing.Microanalysis shows that the increase in the number of cycles decreases the generation of internal hydration products and defects in concrete mixed with enhancing materials and improves the related indexes.Based on the Wiener model analysis,the reliability of concrete with different lithologies and enhancing materials is improved,which may provide a reference for the application of manufactured sand concrete and enhancing materials in Northwest China,especially for the study of the improvement effects and mechanism of enhancing materials on the performance of concrete.展开更多
Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section...Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.展开更多
Belowground bud banks are essential for the regeneration of plant population in arid desert areas,and their response to environmental changes could reflect adaptive strategies of plants to desert habitats.However,the ...Belowground bud banks are essential for the regeneration of plant population in arid desert areas,and their response to environmental changes could reflect adaptive strategies of plants to desert habitats.However,the size and composition of belowground bud banks and their response to environmental factors in the desert steppe zone remain poorly understood,challenging desertification control efforts in arid desert areas.This study examined the density and vertical distribution of horizontal and vertical rhizome buds of a rhizomatous legume herb Sophora alopecuroides L.,its population characteristics,and soil physical-chemical properties in three habitats(interdune lowland(IL),flat sandy land(FSL),and desert steppe(DS))in a desert steppe zone,northern China.Our findings revealed that:(1)total and horizontal rhizome bud densities of S.alopecuroides differed significantly among the three habitats(P<0.05),with the largest total rhizome bud density(177 buds/m2)in IL and the smallest(63 buds/m2)in DS;(2)horizontal rhizome buds distributed in the deep soil layer were dominant in IL,while vertical rhizome buds in the top soil layer were predominant in DS;and(3)soil coarse sand,nutrient content,and population density were the primary factors affecting bud bank density of S.alopecuroides.Specifically,horizontal rhizome buds were dependent largely on soil coarse sand content,and vertical rhizome buds tended to be more related to soil organic matter content and population density.Our results indicated that horizontal rhizome buds were more important in IL with frequent aeolian disturbance,whereas vertical rhizome buds were more important in DS with abundant water and nutrient resources.The plastic responses and survival strategies of S.alopecuroides bud bank to different habitats provide valuable information for the effective implementation of desertification control measures and the management of desert steppe ecosystems.展开更多
Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance...Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance the accuracy of maize growth monitoring in dust-affected regions,this study aims to quantify the effect of sand dust retention on maize during the tasseling stage in the Kashgar Prefecture,Xinjiang Uygur Autonomous Region,China,by analyzing changes in canopy reflectance and vegetation indices.First,field sampling was conducted to measure the key canopy structure parameters and dust retention levels of maize,and laboratory spectral measurements were performed on leaf spectral properties under gradient dust retention.The measured data were then used to drive the LargE-Scale remote sensing data and image Simulation framework(LESS)model for simulating realistic maize canopy spectra across different dust levels,with validation against Sentinel-2 imagery.Second,on the basis of the simulated and satellite-derived spectra,the dust resistance of 36 common vegetation indices was systematically evaluated,and new robust dust-resistant indices were developed.The results showed that compared with dust-free maize,the canopy reflectance of dust-retained maize followed an increase–decrease–increase pattern,with critical turning points at 735 and 1325 nm.The maximum reflectance difference of–0.11755(change rate:29.002%)occurred within the 735–1325 nm range at 24 g/m^(2)dust retention,and the minimum reflectance difference of 0.04285(change rate:148.950%)was observed in the 350–735 nm range under the same dust retention level.Among the 36 vegetation indices,only the global environment monitoring index(GEMI)and the ratio of transformed chlorophyll absorption in reflectance index to optimized soil-adjusted vegetation index(TCARI/OSAVI)exhibited dust resistance,with GEMI being effective below 6 g/m^(2)and TCARI/OSAVI remaining stable across all levels(average ratio:0.970).The newly developed indices in this study,(RE3–RE2)/(NIR–RE2),(RE3–RE2)/(RE4–RE2),and(NIR–RE2)/(RE4–RE2),retained values within the predefined dust-resistant range over the full dust retention levels of 0–24 g/m^(2),thus showing a more stable dust resistance compared with the commonly used 36 vegetation indices.Specially,(RE3–RE2)/(RE4–RE2)performed the most robustly in Sentinel-2 imagery,that is,58.020%of pixels were within the dust-resistant range,and an average ratio of 0.937 was obtained for the original-spectra index.This study provides a scientific basis for crop monitoring and management in dust-affected regions.展开更多
The ocean serves as a repository for various types of artificial nanoparticles.Nanoplastics(NPs)and nano zinc oxide(nZnO),which are frequently employed in personal care products and food packaging materials,are likely...The ocean serves as a repository for various types of artificial nanoparticles.Nanoplastics(NPs)and nano zinc oxide(nZnO),which are frequently employed in personal care products and food packaging materials,are likely simultaneously released and eventually into the ocean with surface runoff.Therefore,their mutual influence and shared destiny in marine environment cannot be ignored.This study examined how nanomaterials interacted and transported through sea sand in various salinity conditions.Results showed that NPs remained dispersed in brine,while nZnO formed homoaggregates.In seawater of 35 practical salinity units(PSU),nZnO formed heteroaggregates with NPs,inhibiting NPs mobility and decreasing the recovered mass percentage(Meff)from 24.52%to 12.65%.In 3.5 PSU brackish water,nZnO did not significantly aggregate with NPs,and thus barely affected their mobility.However,NPs greatly enhanced nZnO transport with Meff increasing from 14.20%to 25.08%,attributed to the carrier effect of higher mobility NPs.Cotransport from brackishwater to seawater was simulated in salinity change experiments and revealed a critical salinity threshold of 10.4 PSU,below which the mobility of NPs was not affected by coexisting nZnO and above which nZnO strongly inhibited NP transport.This study highlights the importance of considering the mutual influence and shared destiny of artificial nanoparticles in the marine environment and how their interaction and cotransport are dependent on changes in seawater salinity.展开更多
The complex and diverse nature of coal mining sites,including different landforms and working conditions,presents challenges for rehabilitation efforts.To address this,we conducted a comprehensive experimental study f...The complex and diverse nature of coal mining sites,including different landforms and working conditions,presents challenges for rehabilitation efforts.To address this,we conducted a comprehensive experimental study focusing on microbially induced calcium carbonate precipitation(MICP)remediation,considering the fracture characteristics of coal mining sites.The MICP-restored samples were subjected to confined/unconfined compressive strength,uniaxial/triaxial permeability,and souring tests to assess their restoration efficacy.The results showed that under similar mining conditions,the average depth of parallel fractures was 0.185 m for loess ridges,0.16 m for the valley,and 0.146 m for the blown-sand region,while the average depth for boundary fractures was 0.411 m for loess ridges,0.178 m for the valley,and 0.268 m for the blown-sand region.Notably,parallel fractures showed negligible filling in all landforms,whereas boundary fractures in the blown-sand region were completely filled with wind-deposited sand.The valley landform was filled with alluvium and wind-deposited sand,whereas the loess landform was filled with wind-deposited sand and loess.MICP-restored soil samples in all landforms achieved a strength comparable to remolded fracture-free soil samples.Across all landforms,the maximum permeability coefficient of MICP-restored soil samples closely matched that of remolded fracture-free soil samples.Under similar topographic and rainfall conditions MICP restorations scoured 31.3 g on blown-sand region,19.3 g on loess ridges,and 17.6 g on valleys.These research findings provide an experimental foundation for MICP repair of coal mining ground fractures.展开更多
The Cenozoic source-to-sink history of the Qaidam Basin is crucial for understanding of the basin-filling architecture,mountain-building processes and even the dynamics of the Tibetan Plateau growth.However,the proven...The Cenozoic source-to-sink history of the Qaidam Basin is crucial for understanding of the basin-filling architecture,mountain-building processes and even the dynamics of the Tibetan Plateau growth.However,the provenance history of Cenozoic strata in the Qaidam Basin remains ambiguous,especially in the northern Qaidam Basin.This controversy highlights the importance of obtaining the spatial source-to-sink relationships between the Qaidam Basin and its surrounding mountain ranges.In this study,we investigated the detrital zircon U-Pb ages of modern fluvial systems draining the East Kunlun Mountain.Their detrital zircon age distributions fall into five age groups:300-190,530-360,1000-560,2000-1100 and 2650-2000 Ma.The dominant age groups are 530-360 and 300-190 Ma,which represent the successive subduction of the Proto-Tethys and PaleoTethys Oceans and the subsequent continental collisions,respectively.Combining these new detrital zircon U-Pb ages with available age datasets,we finally obtained complete detrital zircon age information for modern fluvial systems in the whole Qaidam Basin.The U-Pb age distributions of modern river sands reveal that the zircon age signature of basement rocks in the East Kunlun Mountain is significantly different from that in the South Qilian Mountain but is similar to that in the Altyn Tagh Mountain.Moreover,these zircon age observations were confirmed by the significant difference in the Nd isotopic signature of modern river sands,which reveals a significant difference between the East Kunlun Mountain and South Qilian Mountain in the formation and evolution process.展开更多
The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it i...The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.展开更多
Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an...Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.展开更多
It has been well recognized that sand particles significantly affect the mechanical properties of reconstituted sandy clays,including the hosted clay and sand particles.However,interrelation between the permeability a...It has been well recognized that sand particles significantly affect the mechanical properties of reconstituted sandy clays,including the hosted clay and sand particles.However,interrelation between the permeability and compressibility of reconstituted sandy clays by considering the structural effects of sand particles is still rarely reported.For this,a series of consolidation-permeability coefficient tests were conducted on reconstituted sandy clays with different sand fractions(ψ_(ss)),initial void ratio of hosted clays(e_(c0))and void ratio at liquid limit of hosted clays(e_(cL)).The roles of ψ_(ss) in both the relationships of permeability coefficient of hosted clay(k_(v-hosted clay))versus effective vertical stress(σ'_(v))and void ratio of hosted clay(e_(c-hosted clay))versus σ'_(v) were analyzed.The results show that the permeability coefficient of reconstituted sandy clays(k_(v))is dominated by hosted clay(k_(v)=k_(v-hosted clay)).Both ψ_(ss) and σ'_(v) affect the k_(v) of sandy clays by changing the e_(c-hosted clay) at any given σ'_(v).Due to the partial contacts and densified clay bridges between the sand particles(i.e.structure effects),the e_(c-hosted clay) in sandy clays is higher than that in clays at the same σ'_(v)v.The k_(v)-e_(c-hosted clay) relationship of sandy clays is independent of σ'_(v) and ψ_(ss)but is a function of e_(cL).The types of hosted clays affect the k_(v) of sandy clays by changing the e_(cL).Based on the relationship between permeability coefficient and void ratio for the reconstituted clays,an empirical method for determining the k_(v) is proposed and validated for sandy clays.The predicted values are almost consistent with the measured values with k_(v-predicted)=k_(v-measured)=0.6-2.5.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51774307,52074331,42002182)partially supported by Major Special Projects of CNPC,China(ZD2019-184)。
文摘To visually describe the sanding pattern,this study constructs a new particle-scale microstructure model of weakly consolidated formation,and develop the corresponding methodology to simulate the sanding process and predict sand cavity shape.The microstructure model is a particle-objective model,which focuses on the random sedimentation of every sand grain.In the microstructure,every particle has its own size,sphericity and inclination angle.It is used to simulate the actual structure of cemented granular materials,which considers the heterogeneity and randomness of reservoir properties,provides the initial status for subsequent sanding simulation.With the particle detachment criteria,the microscopic simulation of sanding can be visually implemented to investigate the pattern and cavity shapes caused by sand production.The results indicate that sanding always starts initially from the borehole border,and then extends along the weakly consolidated plane,showing obvious characteristic of randomness.Three typical microscopic sanding patterns,concerning pore liquefaction,pseudo wormhole and continuous collapse,are proposed to illustrate the sanding mechanism in weakly consolidated reservoirs.The nonuniformity of sanding performance depends on the heterogeneous distribution of reservoir properties,such as rock strength and particle size.Finally,the three sanding patterns are verified by visually experimental work.The proposed integrated methodology is capable of predicting and describing the sanding cavity shape of an oil well after long-term sanding production,and providing the focus objective of future sand control measure.
基金funded by the Iran National Science Foundation(INSF)(Grant No.96001589).
文摘Mechanical failure of materials adjacent to the production cavity and material disaggregation caused by fluid drag are considered as the most important parameters that affect sand production.In light of such factors,the coupling of two mechanisms-mechanical instability and hydrodynamic erosion-is indispensable in order to model this phenomenon successfully.This paper examines the applicability of a coupled hydro-mechanical erosion criterion for simulating sand production using the finite element method.The porous medium was considered fully saturated.The onset of sanding and production of sand were predicted by coupling mechanical failure and subsequent erosion of the grain particles utilizing a sanding model.To consider the erosion process,the Papamichos and Stavropoulou(1998)’s sand erosion criterion was incorporated into the finite element code.Arbitrary Lagrangian-Eulerian(ALE)adaptive mesh approach was used to account for large amounts of erosive material loss.Besides,in order to address the problem of severe mesh distortion,the“mesh mapping technique”was employed.Sand production in a horizontal wellbore and in a field case was simulated to demonstrate capabilities of the proposed model.In addition,principal parameters affecting sand production,including in situ stresses,cohesion,perforation orientation,and drawdown were examined.The results indicated the efficiency of the model used in evaluation of sanding in the field.Parametric studies indicated that in situ stresses and formation cohesion could be considered as dominant factors affecting the amount of sand production.
文摘Aiming at the fracture of the bracket of sanding nozzle of CRH5 EMU bogie, the fatigue strength analysis and modal analysis of the bracket were conducted according to En13749 and BS7608 standards, and the track excitation during the vehicle running was thoroughly analyzed. The cause leading to the fracture of the bracket was found and the bracket was redesigned.
基金Supported by the PetroChina-China University of Petroleum(Beijing)Strategic Cooperation Project(ZLZX2020-04)。
文摘True tri-axial sanding fracturing experiments are carried out on conglomerate samples from the Permian Wuerhe Formation of Mahu sag,Junggar Basin,to study hydraulic fracture propagation geometry and quartz sand transport in ma-trix-supported fine conglomerate and grain-supported medium conglomerate.The effect of rough fracture surface on conduc-tivity is analyzed using the 3D-printing technology to reconstruct the rough surface formed in the fractured conglomerate.The hydraulic fractures formed in the matrix-supported fine conglomerate are fairly straight,and only more tortuous when en-countering large gravels at local parts;thus,proppants can get into the fractures easily with transport distance about 70%–90%of the fracture length.By contrast,in the grain-supported medium conglomerate,hydraulic fractures tend to bypass the gravels to propagate in tortuous paths and frequently change in width;therefore,proppants are difficult to transport in these fractures and only move less than 30%of the fracture length.As the ma trix-supported fine conglomerate has high matrix content and low hardness,proppants embed in the fracture surface severely.In contrast,the grain-supported medium conglomerate has higher gravel content and hardness,so the quartz sand is crushed more severely.Under the high proppant concentration of 5 kg/m^(2),when the closure stress is increased(above 60 MPa),fractures formed in both matrix-supported fine conglomerate and grain-supported medium conglomerate decrease in width significantly,and drop 88%and 92%in conductivity respectively compared with the case under the low closure stress of 20 MPa.The field tests prove that under high closure stress above 60 MPa,using a high proportion of fine proppants with high concentration allow the proppant to move further in the fracture;meanwhile proppant places more uniformly in the ro ugh fracture,resulting in a higher fracture conductivity and an improved well per-formance.
文摘Sand production is a challenging issue in upstream oil and gas industry,causing operational and safety problems.Therefore,before drilling the wells,it is essential to predict and evaluate sanding onset of the wells.In this paper,new poroelastoplastic stress solutions around the perforation tunnel and tip based on the Mohr-Coulomb criterion are presented firstly.Based on the stress models,a tensile failure induced sanding onset prediction model for cased-perforated gas wells is derived.Then the analytical model is applied to field data to verify its applicability.The results from the perforation tip tensile failure induced sanding model are very close to field data.Therefore,this model is recommended for forecasting the critical conditions of sand production analysis.Such predictions are necessary for providing technical support for sand control decision-making and predicting the production condition at which sanding onset occurs.
文摘The research method in this paper is based on the standard of American Society for Testing andMaterials (ASTM). Planing and sanding are selected to study the machining properties of E. urophylla × E.grandis plantation wood. Moreover, the reasons for machining defects are analyzed. The results show E.urophylla × E. grandis planted in south China is a good species with a great potential for solid woodutilization.
基金Funded by the National Key Research and Development Program of China(No.2020YFC1909905)the Science and Technology Research and Development Plan of China National Railway Group Co.,Ltd.(No.L2022G009)the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘This study aimed to investigate the influence of recycled sand(RS)content and water-binder ratio on the long term performance of recycled sand concrete(RSC).A 220 days drying shrinkage and creep test of RSC was conducted,and the microhardness of ITZ were analyzed to explain the differences in performance.The experimental results indicate that,when RS content is 50%,the drying shrinkage and creep strain of RSC is the smallest.This is attributed to the highest microhardness in the ITZ when the RS content is 50%.When the RS content is 100%,the shrinkage and creep strains increase due to the high water absorption of RS,which leads to the evaporation of additional water and the deterioration of the ITZ.As the water-binder ratio increases,the drying shrinkage and creep strain of RSC with different RS content increases.According to the EC2 specification and the CEB-FIP specification,the drying shrinkage and creep prediction models for RSC have been established.
基金supported by the Xinjiang Key Research and Development Programme Project(2022B02040-2)the Tianshan Yingcai Program of Xinjiang Uygur Autonomous Region(2024TSYCLJ0028).
文摘Cyperus esculentus(C.esculentus),a desert-adapted plant species with both ecological and economic value,has been widely cultivated in northern China's sandy regions.However,limited studies have investigated the performance of composite shelterbelts that integrate C.esculentus.This study systematically evaluated five shelterbelt models—Populus euphratica(P.euphratica),P.euphratica–C.esculentus composite,P.euphratica–nylon net–C.esculentus composite,Tamarix chinensis(T.chinensis),and T.chinensis–C.esculentus composite—using wind tunnel experiments and field observations.Sediment flux was measured at a normalized downwind distance(x/h)of 5,where x refers to the distance from the front edge(upwind side)of the shelterbelt for upwind measurements,and the distance from the rear edge(downwind side)for downwind measurements,and h represents the canopy height.Wind velocity was measured at x/h of–2,–1,1,2,3,5,and 7,and sand flux was measured at x/h=5,under initial wind velocities of 8.0 and 12.0 m/s.The results indicated that the P.euphratica–nylon net–C.esculentus composite was the most effective in reducing wind velocity,followed by the P.euphratica–C.esculentus composite.In contrast,the P.euphratica and T.chinensis exhibited relatively weaker wind reduction capabilities.Regarding sand flux,under moderate wind velocity(8.0 m/s),both the P.euphratica–C.esculentus composite and P.euphratica–nylon net–C.esculentus composite demonstrated the lowest sand flux values.However,under high wind velocity(12.0 m/s),the P.euphratica–nylon net–C.esculentus composite significantly outperformed the other shelterbelt models in sand retention,highlighting its superior windbreak and sand fixation efficacy.Field observations further validated the windbreak and sand fixation effects of C.esculentus.Comparisons between the bare sand plot and C.esculentus plot within protective forests demonstrated that planting C.esculentus can provide substantial ecological benefits in windbreak and sand-fixation.These findings,reinforced by field observations,strengthen the wind tunnel experiment results and highlight the critical role of C.esculentus in enhancing the performance of composite shelterbelts for desert ecological restoration.
基金Funded by the National Natural Science Foundation of China(No.51708290)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘The utilization of discarded coral debris in cementitious material is a prominent research area for island construction projects.The aim of this study is to explore the use of environment-friendly cement and waste coral sand in the preparation of coral mortar,while investigating its performance when exposed to a chloride environment.Three types of low-carbon cements were employed,such as rapid hardening sulphoaluminate(RCSA)cement,high belite sulphoaluminate(HBCSA)cement,and slag sulphoaluminate cement(SSC).The coulomb electric flux,mechanical properties,free chloride content,and mass change of the cement mortar under exposed to 3.5 wt%NaCl solution were examined at various time intervals.X-ray diffraction analysis was conducted to identify the mineral phases present in the mortar samples.The results demonstrate that the flexural and compressive strength of the mortar consistently increase throughout the 360 days chloride exposure period.Incorporating coral sand into SSC-based mortars enhances their compressive strength from day 28 up until day 360.However,it adversely affects the strength of HBCSA-based mortars.The behavior of mortars exposed to a chloride-rich environment is closely associated with the amount of C-S-H gel present within them.SSC generates a significant quantity of C-S-H gel which possesses a large specific surface area capable of absorbing more chloride ions thereby reducing their concentration within the mortar matrix as well as increasing its mass and improving resistance against chloride ion penetration.
基金Funded by the Chongqing Natural Science Foundation Project(No.cstc202ljcyj-msxmX0725)。
文摘We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent laws of concrete mix design.Four models,including random forest,Cat Boost,XGBoost,and deep neural network,were trained.The experimental results demonstrate that the XGBoost model performs the best in predicting the strength of sea sand concrete.Its R^(2)value reached 0.9999,and evaluation indexes such as MAPE,RMSE,MAE,and MSE are superior to those of other models.The principal component analysis(PCA)was conducted to visually analyze the structure and distribution of the original feature data,and Pearson correlation coefficient analysis and Shapley additive explanation(SHAP)were utilized to explore the impact of input characteristics on the strength of sea sand concrete.SHAP analysis is more conducive to revealing the nonlinear effects of various characteristics on the model prediction results,especially that particle size of stone has significant impacts on the strength of sea sand concrete.In addition,experimental verification was carried out to confirm the accuracy of the optimized training model.These findings offer some insights for the future design and application of sea sand in high-performance marine and coastal infrastructure.
基金Funded by the National Natural Science Foundation of China(No.52178216)the Research on the Durability and Application of High-performance Concrete for Highway Engineering in the Cold and Arid Salt Areas of Northwest China(No.2022-24)the Construction Project of the Scientific Research Platform of Provincial Enterprises Supported by the Capital Operating Budget of Gansu Province(No.2023GZ018)。
文摘To study the durability of concrete in harsh environments in Northwest China,concrete was prepared with various durability-improving materials such as concrete anti-erosion inhibitor(SBT-TIA),acrylate polymer(AP),super absorbent resin(SAP).The erosion mode and internal deterioration mechanism under salt freeze-thaw cycle and dry-wet cycle were explored.The results show that the addition of enhancing materials can effectively improve the resistance of concrete to salt freezing and sulfate erosion:the relevant indexes of concrete added with X-AP and T-AP are improved after salt freeze-thaw cycles;concrete added with SBTTIA shows optimal sulfate corrosion resistance;and concrete added with AP displays the best resistance to salt freezing.Microanalysis shows that the increase in the number of cycles decreases the generation of internal hydration products and defects in concrete mixed with enhancing materials and improves the related indexes.Based on the Wiener model analysis,the reliability of concrete with different lithologies and enhancing materials is improved,which may provide a reference for the application of manufactured sand concrete and enhancing materials in Northwest China,especially for the study of the improvement effects and mechanism of enhancing materials on the performance of concrete.
基金financially supported by Youth Science“Research on Failure Mechanism and Evaluation Method of Sand Control Measures for Railway Machinery in Sandy Area”(12302511)Ningxia Transportation Department Science and Technology Project(20200173)The Central Guidance on Local Science and Technology Development Funds(22ZY1QA005)。
文摘Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.
基金funded by the National Natural Science Foundation of China(42207539,42377470)the Key Research and Development Project of Science and Technology Plan of Gansu Province in China International Science and Technology Cooperation Project(25YFWA009).
文摘Belowground bud banks are essential for the regeneration of plant population in arid desert areas,and their response to environmental changes could reflect adaptive strategies of plants to desert habitats.However,the size and composition of belowground bud banks and their response to environmental factors in the desert steppe zone remain poorly understood,challenging desertification control efforts in arid desert areas.This study examined the density and vertical distribution of horizontal and vertical rhizome buds of a rhizomatous legume herb Sophora alopecuroides L.,its population characteristics,and soil physical-chemical properties in three habitats(interdune lowland(IL),flat sandy land(FSL),and desert steppe(DS))in a desert steppe zone,northern China.Our findings revealed that:(1)total and horizontal rhizome bud densities of S.alopecuroides differed significantly among the three habitats(P<0.05),with the largest total rhizome bud density(177 buds/m2)in IL and the smallest(63 buds/m2)in DS;(2)horizontal rhizome buds distributed in the deep soil layer were dominant in IL,while vertical rhizome buds in the top soil layer were predominant in DS;and(3)soil coarse sand,nutrient content,and population density were the primary factors affecting bud bank density of S.alopecuroides.Specifically,horizontal rhizome buds were dependent largely on soil coarse sand content,and vertical rhizome buds tended to be more related to soil organic matter content and population density.Our results indicated that horizontal rhizome buds were more important in IL with frequent aeolian disturbance,whereas vertical rhizome buds were more important in DS with abundant water and nutrient resources.The plastic responses and survival strategies of S.alopecuroides bud bank to different habitats provide valuable information for the effective implementation of desertification control measures and the management of desert steppe ecosystems.
基金supported by the Fundamental Research Funds for the Central Universities(N2001020)the National Natural Science Foundation of China(41201359).
文摘Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance the accuracy of maize growth monitoring in dust-affected regions,this study aims to quantify the effect of sand dust retention on maize during the tasseling stage in the Kashgar Prefecture,Xinjiang Uygur Autonomous Region,China,by analyzing changes in canopy reflectance and vegetation indices.First,field sampling was conducted to measure the key canopy structure parameters and dust retention levels of maize,and laboratory spectral measurements were performed on leaf spectral properties under gradient dust retention.The measured data were then used to drive the LargE-Scale remote sensing data and image Simulation framework(LESS)model for simulating realistic maize canopy spectra across different dust levels,with validation against Sentinel-2 imagery.Second,on the basis of the simulated and satellite-derived spectra,the dust resistance of 36 common vegetation indices was systematically evaluated,and new robust dust-resistant indices were developed.The results showed that compared with dust-free maize,the canopy reflectance of dust-retained maize followed an increase–decrease–increase pattern,with critical turning points at 735 and 1325 nm.The maximum reflectance difference of–0.11755(change rate:29.002%)occurred within the 735–1325 nm range at 24 g/m^(2)dust retention,and the minimum reflectance difference of 0.04285(change rate:148.950%)was observed in the 350–735 nm range under the same dust retention level.Among the 36 vegetation indices,only the global environment monitoring index(GEMI)and the ratio of transformed chlorophyll absorption in reflectance index to optimized soil-adjusted vegetation index(TCARI/OSAVI)exhibited dust resistance,with GEMI being effective below 6 g/m^(2)and TCARI/OSAVI remaining stable across all levels(average ratio:0.970).The newly developed indices in this study,(RE3–RE2)/(NIR–RE2),(RE3–RE2)/(RE4–RE2),and(NIR–RE2)/(RE4–RE2),retained values within the predefined dust-resistant range over the full dust retention levels of 0–24 g/m^(2),thus showing a more stable dust resistance compared with the commonly used 36 vegetation indices.Specially,(RE3–RE2)/(RE4–RE2)performed the most robustly in Sentinel-2 imagery,that is,58.020%of pixels were within the dust-resistant range,and an average ratio of 0.937 was obtained for the original-spectra index.This study provides a scientific basis for crop monitoring and management in dust-affected regions.
基金supported by the National Natural Science Foundation of China (No.22176148)the Shanghai Rising-Star Program (No.23QB1406400)+1 种基金the Fundamental Research Funds for the Central Universities of Tongji University (No.2023-3-ZD-02)supported by the program INTPART (Plastic Pollution,No.275172)funded by the Research Council of Norway.
文摘The ocean serves as a repository for various types of artificial nanoparticles.Nanoplastics(NPs)and nano zinc oxide(nZnO),which are frequently employed in personal care products and food packaging materials,are likely simultaneously released and eventually into the ocean with surface runoff.Therefore,their mutual influence and shared destiny in marine environment cannot be ignored.This study examined how nanomaterials interacted and transported through sea sand in various salinity conditions.Results showed that NPs remained dispersed in brine,while nZnO formed homoaggregates.In seawater of 35 practical salinity units(PSU),nZnO formed heteroaggregates with NPs,inhibiting NPs mobility and decreasing the recovered mass percentage(Meff)from 24.52%to 12.65%.In 3.5 PSU brackish water,nZnO did not significantly aggregate with NPs,and thus barely affected their mobility.However,NPs greatly enhanced nZnO transport with Meff increasing from 14.20%to 25.08%,attributed to the carrier effect of higher mobility NPs.Cotransport from brackishwater to seawater was simulated in salinity change experiments and revealed a critical salinity threshold of 10.4 PSU,below which the mobility of NPs was not affected by coexisting nZnO and above which nZnO strongly inhibited NP transport.This study highlights the importance of considering the mutual influence and shared destiny of artificial nanoparticles in the marine environment and how their interaction and cotransport are dependent on changes in seawater salinity.
基金funded by Guizhou Provincial Science and Technology Project,Qiankehejichu-ZK[2022]-YB529Guizhou Education Department(Youth Science and Technology Topnotch Talent Project)QJJ[2024]345+1 种基金Guizhou Provincial Science and Technology Project,QKHJC-ZK[2023]-YBGuizhou Education Department Youth Science and Technology Talents Growth Project,QJHKY[2020]122.
文摘The complex and diverse nature of coal mining sites,including different landforms and working conditions,presents challenges for rehabilitation efforts.To address this,we conducted a comprehensive experimental study focusing on microbially induced calcium carbonate precipitation(MICP)remediation,considering the fracture characteristics of coal mining sites.The MICP-restored samples were subjected to confined/unconfined compressive strength,uniaxial/triaxial permeability,and souring tests to assess their restoration efficacy.The results showed that under similar mining conditions,the average depth of parallel fractures was 0.185 m for loess ridges,0.16 m for the valley,and 0.146 m for the blown-sand region,while the average depth for boundary fractures was 0.411 m for loess ridges,0.178 m for the valley,and 0.268 m for the blown-sand region.Notably,parallel fractures showed negligible filling in all landforms,whereas boundary fractures in the blown-sand region were completely filled with wind-deposited sand.The valley landform was filled with alluvium and wind-deposited sand,whereas the loess landform was filled with wind-deposited sand and loess.MICP-restored soil samples in all landforms achieved a strength comparable to remolded fracture-free soil samples.Across all landforms,the maximum permeability coefficient of MICP-restored soil samples closely matched that of remolded fracture-free soil samples.Under similar topographic and rainfall conditions MICP restorations scoured 31.3 g on blown-sand region,19.3 g on loess ridges,and 17.6 g on valleys.These research findings provide an experimental foundation for MICP repair of coal mining ground fractures.
基金supported by the Geological Survey of China(No.DD20221645)the National Natural Science Foundation of China(Nos.42171010,42072141,41702118)。
文摘The Cenozoic source-to-sink history of the Qaidam Basin is crucial for understanding of the basin-filling architecture,mountain-building processes and even the dynamics of the Tibetan Plateau growth.However,the provenance history of Cenozoic strata in the Qaidam Basin remains ambiguous,especially in the northern Qaidam Basin.This controversy highlights the importance of obtaining the spatial source-to-sink relationships between the Qaidam Basin and its surrounding mountain ranges.In this study,we investigated the detrital zircon U-Pb ages of modern fluvial systems draining the East Kunlun Mountain.Their detrital zircon age distributions fall into five age groups:300-190,530-360,1000-560,2000-1100 and 2650-2000 Ma.The dominant age groups are 530-360 and 300-190 Ma,which represent the successive subduction of the Proto-Tethys and PaleoTethys Oceans and the subsequent continental collisions,respectively.Combining these new detrital zircon U-Pb ages with available age datasets,we finally obtained complete detrital zircon age information for modern fluvial systems in the whole Qaidam Basin.The U-Pb age distributions of modern river sands reveal that the zircon age signature of basement rocks in the East Kunlun Mountain is significantly different from that in the South Qilian Mountain but is similar to that in the Altyn Tagh Mountain.Moreover,these zircon age observations were confirmed by the significant difference in the Nd isotopic signature of modern river sands,which reveals a significant difference between the East Kunlun Mountain and South Qilian Mountain in the formation and evolution process.
基金granted by the Xinjiang Geological Exploration Fund。
文摘The northwestern margin of Junggar Basin is the region with the richest oil sand resources in China.For better understanding the enrichment rules and deployment of exploration and development of regional oil sand,it is of great scientific significance to study the accumulation conditions of oil sand in different strata and mining areas of the Junggar Basin.Through a large number of field investigations,drilling verification and sampling tests,it is found that the oil sand in the region covers an area of 2000 km^(2),with shallow and thick reservoir,and predicted resource of 180 million tons.The oil sand resources are mainly distributed in four geological strata,namely the Middle Triassic Karamay Formation,Early Jurassic Badaowan Formation,Late Jurassic Qigu Formation,and Early Cretaceous Qingshuihe Formation.The reservoir is mainly composed of sandstone with high porosity and permeability,and the reservoir space is mainly intergranular pores with a medium average oil content.The oil sand deposit in the region is a typical destructive oil reservoir.The crude oil in the oil sand layer is degraded and thickened from the deep to the shallow,the content of saturated hydrocarbon decreased,and the content of aromatic hydrocarbon,non-hydrocarbon and asphaltene increased.The oil source comes from the deep Permian hydrocarbon-generating depression.Unconformities,faults and marginal fan delta-braided river depositional systems constitute effective migration and storage systems.Caprocks of the Upper Triassic Baijiantan Formation,Lower Jurassic Sangonghe Formation and Lower Cretaceous Hutubihe Formation were formed by three large scale lake transgressions.The Indosinian,Yanshan and Late Yanshan movements are the main driving forces for the migration of deep oil and gas to the shallow edge to form oil sand deposits.It is considered that the oil sand in the northwestern margin of Junggar Basin is of a slope complex migration type.
基金The authors would like to acknowledge the support of the National Natural Science Foundation of China(No.52279097,No.51779264)Blue and Green Project of Jiangsu Province.
文摘Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.
基金supported by the National Natural Science Foundation of China (Grant Nos.52278334 and 4197724)Fundamental Research Funds for the Central Universities (Grant No.2242024k30066).
文摘It has been well recognized that sand particles significantly affect the mechanical properties of reconstituted sandy clays,including the hosted clay and sand particles.However,interrelation between the permeability and compressibility of reconstituted sandy clays by considering the structural effects of sand particles is still rarely reported.For this,a series of consolidation-permeability coefficient tests were conducted on reconstituted sandy clays with different sand fractions(ψ_(ss)),initial void ratio of hosted clays(e_(c0))and void ratio at liquid limit of hosted clays(e_(cL)).The roles of ψ_(ss) in both the relationships of permeability coefficient of hosted clay(k_(v-hosted clay))versus effective vertical stress(σ'_(v))and void ratio of hosted clay(e_(c-hosted clay))versus σ'_(v) were analyzed.The results show that the permeability coefficient of reconstituted sandy clays(k_(v))is dominated by hosted clay(k_(v)=k_(v-hosted clay)).Both ψ_(ss) and σ'_(v) affect the k_(v) of sandy clays by changing the e_(c-hosted clay) at any given σ'_(v).Due to the partial contacts and densified clay bridges between the sand particles(i.e.structure effects),the e_(c-hosted clay) in sandy clays is higher than that in clays at the same σ'_(v)v.The k_(v)-e_(c-hosted clay) relationship of sandy clays is independent of σ'_(v) and ψ_(ss)but is a function of e_(cL).The types of hosted clays affect the k_(v) of sandy clays by changing the e_(cL).Based on the relationship between permeability coefficient and void ratio for the reconstituted clays,an empirical method for determining the k_(v) is proposed and validated for sandy clays.The predicted values are almost consistent with the measured values with k_(v-predicted)=k_(v-measured)=0.6-2.5.
