Based on the beginning, propagating and ending mechanism of rotating-stallcell, the relation between the pressure history signal and the pressure distribution along rotorcircumference is proposed. The angular velociti...Based on the beginning, propagating and ending mechanism of rotating-stallcell, the relation between the pressure history signal and the pressure distribution along rotorcircumference is proposed. The angular velocities of rotating-stall cell propagating are computedfrom time series picked by the pressure probes on a cross section. Self-relation calculatingfiltered the random noise of the pressure history data. The exciting load on rotor is computed byintegral of filtered pressure signal along rotor circumference. By Prohl-Myklestad method, dynamicalequations of rotor system are obtained. The dynamical response of rotor system is resolved by usingMatlab system. Further more, the situation of more than one of stall cells is discussed. Two casesrespectively from the natural gas compressor of some fertilizer plant and the CO_2 compressor ofsome nitrogenous fertilizer plant demonstrate that both methods of calculating the load exerted onrotor by pressure fluctuation and resolving the dynamic response of rotor are available and thecharacteristics of frequency spectrum of rotating stall are correct.展开更多
Blades are important parts of rotating machinery such as marine gas turbines and wind turbines,which are exposed to harsh environments during mechanical operations,including centrifugal loads,aerodynamic forces,or hig...Blades are important parts of rotating machinery such as marine gas turbines and wind turbines,which are exposed to harsh environments during mechanical operations,including centrifugal loads,aerodynamic forces,or high temperatures.These demanding working conditions considerably influence the dynamic performance of blades.Therefore,because of the challenges posed by blades in complex working environments,in-depth research and optimization are necessary to ensure that blades can operate safely and efficiently,thus guaranteeing the reliability and performance of mechanical systems.Focusing on the vibration analysis of blades in rotating machinery,this paper conducts a comprehensive literature review on the research advancements in vibration modeling and structural optimization of blades under complex operational conditions.First,the paper outlines the development of several modeling theories for rotating blades,including one-dimensional beam theory,two-dimensional plate-shell theory,and three-dimensional solid theory.Second,the research progress in the vibrational analysis of blades under aerodynamic loads,thermal environments,and crack factors is separately discussed.Finally,the developments in rotating blade structural optimization are presented from material optimization and shape optimization perspectives.The methodology and theory of analyzing and optimizing blade vibration characteristics under multifactorial operating conditions are comprehensively outlined,aiming to assist future researchers in proposing more effective and practical approaches for the vibration analysis and optimization of blades.展开更多
Background:In China,the policy of rotating teachers between urban and rural schools has been implemented to reduce educational disparities and ensure equitable access to quality education.These teachers face unique pr...Background:In China,the policy of rotating teachers between urban and rural schools has been implemented to reduce educational disparities and ensure equitable access to quality education.These teachers face unique professional and emotional challenges during the rotation process,making their emotional labor a critical factor influencing their job performance.This study aimed to explore the relationship between rotating teachers’emotional labor strategies and job performance.Methods:This study conducted a cross-sectional survey among 577 rotating teachers selected through stratified random sampling from primary and secondary schools in Chinese mainland.Date were collected using the Teacher Emotional Labor Scale and the Teacher Job Performance Scale.Latent profile analysis(LPA)was employed to identify distinct categories of emotional labor strategies:indifferent,moderately engaged,naturally invested,proactively adjusted,and emotionally elevated.Results:Teachers in the naturally invested and proactively adjusted types demonstrated relatively higher job performance scores,followed by those in the emotionally elevated type.In contrast,teachers in the indifferent and moderate engagement types exhibited comparatively lower scores(F=25.858,p<0.001,η^(2)=0.153).These findings indicate a practical significance,suggestion that flexible and adaptive use emotional labor strategies is strongly associated with enhanced job performance.Conclusion:This study demonstrates that rotating teachers’job performance differs significantly across distinct emotional labor profiles,with balanced and adaptive emotional regulation emerging as a key determinant of higher performance.By identifying and characterizing individual-centered emotional labor profiles,the study advances understanding of how emotional regulation contributes to teachers’professional effectiveness.These results underscore the importance of providing systematic and personalized support to help rotating teachers develop adaptive emotional regulation skills.Targeted guidance should enable teachers to appropriately express and adjust their emotions,thereby avoiding both excessive and insufficient emotional labor and promoting sustainable professional development.展开更多
Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TE...Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TENG)that uses mechanical triggering switches(on-off-on)to enhance the instantaneous current pulses during rotation.The rotating-switch in the proposed device addresses the issue of low instantaneous current output in triboelectric nanogenerators while maintaining voltage stability.At a constant rotational speed,the RS-TENG achieves an instantaneous current of 3.2 times that of its nonswitching counterpart,with an 89%reduction in response time.Furthermore,at a wind speed of 2 m·s^(-1),the RS-TENG achieves a wind power density of 10.4 mW·m^(-2)·m^(-1)·s.Additionally,by integrating the RS-TENG with energy management circuits,the nanogenerator can power wireless signal transmitters and temperature sensors,offering a self-sustaining power solution for remote wireless services.This research presents a promising technology for powering electronic devices in energy-scarce environments.展开更多
In order to solve the issues concerning high hot tearing susceptibility(HTS)of Mg-Al-Ca series alloys,a rotating magnetic field(RMF)was applied during their solidification.The effect of RMF at different excitation cur...In order to solve the issues concerning high hot tearing susceptibility(HTS)of Mg-Al-Ca series alloys,a rotating magnetic field(RMF)was applied during their solidification.The effect of RMF at different excitation current intensities(50 A,100 A,and 150 A)on the solidification and hot tearing behavior of AXJ530(Mg-5Al-3Ca-0.17Sr)alloy was investigated.The results indicated that the HTS of AXJ530 alloy decreased with the increase of excitation current intensity.This aspect can be attributed to significant grain refinement under the action of RMF,which improved the intergranular bonding and relieved the stress concentration.On the other hand,the stirring effect of the electromagnetic force on the melt could break up the developed dendrites and delay the dendrite coherence,as well as optimize the feeding channels and improve the feeding drive of the residual liquid at the end of solidification.Therefore,under the action of RMF,the hot tearing initiation of the alloy was suppressed and the feeding efficiency of the liquid was greatly improved,which led to a noticeable reduction of the HTS of the alloy.Moreover,no significant hot tearing was detected in castings at the excitation current parameters of 150 A and 10 Hz.展开更多
Al/steel bimetallic composites were prepared by compound casting,and the effects of the rotating magnetic field on the interfacial microstructure and shear property of bimetallic composite was investigated.The applica...Al/steel bimetallic composites were prepared by compound casting,and the effects of the rotating magnetic field on the interfacial microstructure and shear property of bimetallic composite was investigated.The application of rotating magnetic field refined the grain structure of the Al alloy matrix,changed the eutectic Si morphology from coarse lath to needle-like.The rotating magnetic field improved the temperature field and solute distribution of the Al alloy melt,enriched a layer of Si at the interface,and suppressed the growth of intermetallic compounds,the thickness of the interface layer decreased from 44.9μm to 22.8μm.The interfacial intermetallic compounds consisted ofη-Al_(5)Fe_(2),θ-Al_(13)Fe_(4),τ6-Al_(4.5)FeSi,τ_(5)-Al_(8)Fe_(2)Si andτ_(3)-Al_(2)FeSi,and the addition of the rotating magnetic field did not change phase composition.The rotating magnetic field improved the stress distribution within the interfacial intermetallic compounds,the presence of high-angle grain boundaries retarded crack extension,and the shear strength was enhanced from 31.27±3 MPa to 52.70±4 MPa.This work provides a feasible method for preparing Al/steel bimetallic composite with good bonding property.展开更多
In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The e...In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The effects of the divergence, straight, and convergence isolators on the rotating detonation wave dynamics and the upstream oblique shock wave propagation mechanism are analyzed. The differences in the rotating detonation wave behaviors between ground and flight operations are clarified.The results indicate that the propagation regimes of the upstream oblique shock wave depend on the isolator configurations and operation conditions. With a divergence isolator, the airflow is accelerated throughout the isolator and divergence section, leading to a maximum Mach number(~1.8) before the normal shock. The total pressure loss reaches the largest, and the detonation pressure drops. The upstream oblique shock wave can be suppressed within the divergence section with the divergence isolator.However, for the straight and convergence isolators, the airflow in the isolator with a larger ψ_(1)(0.3 and0.4) can suffer from the disturbance of the upstream oblique shock wave. The critical incident angle is around 39° at ground operation conditions. The upstream oblique shock wave tends to be suppressed when the engine operates under flight operation conditions. The critical pressure ratio β_(cr0) is found to be able to help in distinguishing the propagation regimes of the upstream oblique shock wave. Slightly below or above the β_(cr0) can obtain different marginal propagation results. The high-speed airflow in the divergence section affects the fuel droplet penetration distance, which deteriorates the reactant mixing and the detonation area. Significant detonation velocity deficits are observed and the maximum velocity deficit reaches 26%. The results indicate the engine channel design should adopt different isolator configurations based on the purpose of total pressure loss or disturbance suppression. This study can provide useful guidance for the channel design of a more complete two-phase rotating detonation engine.展开更多
The large molecular weight and high hydrophilicity of chloramphenicol(CAP) residuals in wastewater led to severe degradation difficulty,which propelled the development of new wastewater degradation processes and react...The large molecular weight and high hydrophilicity of chloramphenicol(CAP) residuals in wastewater led to severe degradation difficulty,which propelled the development of new wastewater degradation processes and reactors based on process intensification.This study enhanced the CAP degradation by ozone/peroxydisulfate(PDS) advanced oxidation process in a submerged rotating packed bed(SRPB)reactor.Compared the usage of different oxidants,it was indicated that the combination of O_(3) and PDS exhibited a higher degradation efficiency than ozone and PDS alone.The more desired degradation efficiency could be achieved at the operating conditions of ascending PDS concentration,SRPB rotational speed,ozone concentration,reduced initial CAP concentration,and the water qualities of ascended pH,lower Cl^(-)and initial CO_(3)^(2-) concentrations.Under the optimized conditions of C_(CAP)=20 mg·L^(-1),C_(O3)=30 mg·L^(-1),C_(PDS)=100 mg·L^(-1),and N=400 r·min^(-1),and water qualities of pH=10,the maximum chloramphenicol degradation efficiency of 97% and kinetic constant of 0.23 min^(-1) were achieved after treating 16 min.A comparison of the results with previously reported advanced oxidation processes of CAP indicated that the enhanced O^(3)/PDS advanced oxidation system using the SRPB can significantly improve the degradation efficiency of CAP.展开更多
Phosphor bronze is a commonly used elastic copper alloy,widely applied in electronic connectors and terminals[1-4].With the rapid development of 5 G mobile communication technology and the new energy vehicle industry,...Phosphor bronze is a commonly used elastic copper alloy,widely applied in electronic connectors and terminals[1-4].With the rapid development of 5 G mobile communication technology and the new energy vehicle industry,the size requirements for connectors have been reduced,while the demand for strength has gradually increased[5].This requires the alloy to possess higher strength and better deformability.展开更多
Traditional beamforming techniques may not accurately locate sources in scenarios with both stationary and rotating sound sources.The existence of rotating sound sources can cause blurring in the stationary beamformin...Traditional beamforming techniques may not accurately locate sources in scenarios with both stationary and rotating sound sources.The existence of rotating sound sources can cause blurring in the stationary beamforming map.Current algorithms for separating different moving sound sources have limited effectiveness,leading to significant residual noise,especially when the rotating source is strong enough to mask stationary sources completely.To overcome these challenges,a novel solution utilizing a virtual rotating array in the modal domain combined with robust principal component analysis is proposed to separate sound sources with different rotational speeds.This approach,named Robust Principal Component Analysis in the Modal domain(RPCA-M),investigates the performance of convex nuclear norm and non-convex Schatten-p norm to distinguish stationary and rotating sources.By comparing the errors in Cross-Spectral Matrix(CSM)recovery and acoustic imaging across different algorithms,the effectiveness of RPCA-M in separating stationary and moving sound sources is demonstrated.Importantly,this method effectively separates sound sources,even when there are significant variations in their amplitudes at different rotation speeds.展开更多
A high-quality welding method,named plasma arc welding apparatus with rotating tungsten electrode(abbreviated as PAW-RT),was proposed in this paper.The rotation speed could be adjusted from 0 to 15000 r/min.The rotary...A high-quality welding method,named plasma arc welding apparatus with rotating tungsten electrode(abbreviated as PAW-RT),was proposed in this paper.The rotation speed could be adjusted from 0 to 15000 r/min.The rotary motion of the tungsten needle trans-ferred circumferential momentum to the arc as well as the molten pool,thereby conferring the latter with rotating fluid flow charac-teristics.The influences of tungsten electrode rotation speed on PAW arc morphology,weld formation and interfacial microstructure of the final weld joints were discussed by the experimental procedures involving in-situ ablation,surfacing and butt welding.The ex-periments were conducted on Q235B steel.The results indicated that the increase of tungsten electrode rotation speed in PAW-RT contributed to improving arc eccentricity,leading to aesthetically improved welds with more uniformity.Additionally,the strength,hardness and toughness of the welded joint increased,while porosity was reduced.展开更多
In semiconductor precision packaging and other applications involving alignment of automated equipment,the nonlinear motion caused by structural characteristics and friction effects on torque-type rotating motion stag...In semiconductor precision packaging and other applications involving alignment of automated equipment,the nonlinear motion caused by structural characteristics and friction effects on torque-type rotating motion stages seriously affects output accuracy and stability.To solve this problem,the motion characteristics of a rotating stage and the mechanism by which friction nonlinearity influences accuracy are analyzed in detail.In addition,a compound control strategy based on a kinematic model and the Stribeck friction model is designed.A friction disturbance observer based on output position feedback is improved for simple parameter tuning.Finally,an experimental system is constructed to carry out validation tests,including identification of nonlinear characteristics and performance comparisons.The experimental results show that the linear tracking error of the torque-type rotating stage is less than 1.47µm after adoption of the proposed model-based composite control strategy,and the corresponding rotary angle deviation is less than 0.0153°.The linearity of output motion is increased to 97.59%and the error compensation effect is improved by 51.6%compared with the PID control method.The experimental results confirm that the analysis method adopted here and the proposed compensation strategy can effectively reduce frictional nonlinearity and improve motion accuracy.The proposed method can also be applied to other precision electromechanical systems.展开更多
Objective:To observe the therapeutic effect of Moist Burn Ointment combined with rotating moxibustion on patients with pressure ulcers and deficiency of both Qi and blood.Methods:40 patients with pressure ulcers and d...Objective:To observe the therapeutic effect of Moist Burn Ointment combined with rotating moxibustion on patients with pressure ulcers and deficiency of both Qi and blood.Methods:40 patients with pressure ulcers and deficiency of both Qi and blood were randomly divided into two groups from July 2024 to November 2025.Group A received Moist Burn Ointment combined with rotating moxibustion,while Group B received Moist Burn Ointment only.Results:Group A showed better efficacy,wound healing time,dressing change frequency,satisfaction,PUSH score,and adverse reaction indicators compared to Group B(P<0.05).Conclusion:The combination of Moist Burn Ointment and rotating moxibustion in the treatment of patients with pressure ulcers and deficiency of both Qi and blood can shorten wound healing time,reduce dressing change frequency,and alleviate the degree of pressure ulcers,which is safe and efficient.展开更多
Rotating Instability (RI) is a typical unsteady flow phenomenon in compressors and may cause severe aerodynamic noise and even potential nonsynchronous vibration. Most studies of RI are based on the uniform inflow, ig...Rotating Instability (RI) is a typical unsteady flow phenomenon in compressors and may cause severe aerodynamic noise and even potential nonsynchronous vibration. Most studies of RI are based on the uniform inflow, ignoring the influence of inlet distortions. This study investigates the mechanism of RI in a transonic rotor through full-annulus unsteady simulations, with a particular focus on the effects of boundary layer ingesting distortions. The results show that at the uniform inflow, the RI fluctuations with the broadband hump can be observed over a relatively wide mass flow rate range, and its origin can be attributed to the coupling effect between the tip leakage flow and shear layer instability. At the inlet distortions, the broadband hump only occurs with partial circumferential locations. This kind of flow phenomenon is defined as Partial Rotating Instability (PRI). The PRI only occurs in a narrower mass flow rate range in which the circumferential range of strong shear is sufficiently large and the self-induced unsteady effects are strong enough. Further, this study confirms that the averaged tip leakage flow axial momentum at the onset of RI or PRI is close, so it can be used as the parameter to determine whether RI or PRI occurs.展开更多
A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine...A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine feet vibrations is presented.First,a generalized mathematical formulation is derived based on a state-space description which can be used for different kinds of models(1D,2D,and 3D models).It is shown that under special boundary conditions,the control parameters can be directly implemented into the stiffness and damping matrices of the system.Based on the generalized mathematical formulation,an example of a rotating machine—described by a 2D model—with journal bearings,flexible rotor,current-controlled electrodynamic actuators,steel frame foundation,and velocity feedback of the machine feet vibrations is presented where the effectiveness of the described active vibration control system is demonstrated.展开更多
The icing of areo-engine inlet components during flight can affect engine operational safety.Conventional hot-air anti-icing systems require a large amount of bleed air,which compromises engine performance.Consequentl...The icing of areo-engine inlet components during flight can affect engine operational safety.Conventional hot-air anti-icing systems require a large amount of bleed air,which compromises engine performance.Consequently,low-energy anti/de-icing methods based on superhydrophobic surfaces have attracted widespread attention.Previous studies have demonstrated that for stationary components,superhydrophobic surfaces can significantly reduce anti-icing energy consumption by altering the flow behavior of runback water.However,for rotating inlet components of aero-engines,the effectiveness of superhydrophobic surfaces and the influence of surface wettability on the evolution of runback water flow remain unclear due to the effects of centrifugal and Coriolis forces.This study establishes a 3D liquid water flow simulation model using the volume of fluid(VOF)method to investigate the effects of rotational speed,airflow velocity,and surface wettability on the runback water flow behavior over the rotating spinner under dynamic rotation conditions.The results show that the rotational effects and surface wettability mutually reinforce one another.Specifically,increasing the rotational speed and contact angle can both enhance the flow velocity of liquid water and accelerate the breakup and rupture of liquid film,leading to the formation of rivulets,droplets,and subsequent detachment from the surface.A theoretical model based on force balance is proposed to describe the evolution of runback water flow,and the analysis reveals that as the rotational speed and contact angle increase,the water film is more likely to break up to form rivulets and beads,and the critical radius for droplet detachment from the surface decreases,making it easier removal from the surface.展开更多
Two-dimensional(2D)direct numerical simulations on the dynamics of three identical ferrofluid droplets suspended in a non-magnetic ambient fluid under a rotating uniform magnetic field are conducted,and the motion and...Two-dimensional(2D)direct numerical simulations on the dynamics of three identical ferrofluid droplets suspended in a non-magnetic ambient fluid under a rotating uniform magnetic field are conducted,and the motion and deformation of the three ferrofluid droplets are studied in this paper.Results show that there are four modes(i.e.,the three droplets'direct coalescence(TC),the coalescence of two droplets and the subsequent planetary motion with the third droplet(CAP),the three droplets'planetary motion(TP),and the independent spin(IS))for the three ferrofluid droplets,dependent on the magnetic Bond number(Bom)and the initial distance(d0)between two of the droplets.It is found that the decrease in d0and the increase in Bomcan make the droplets'mode change from the IS to the planetary motion,and then turn to the CAP.Furthermore,reducing Bomor d0is helpful for the droplets to become merged.展开更多
Copper is susceptible to producing corrosion problems in corrosive environments, which leads to serious safety problems. Thus, investigating the corrosion behavior of copper is of great significance. The effects of ro...Copper is susceptible to producing corrosion problems in corrosive environments, which leads to serious safety problems. Thus, investigating the corrosion behavior of copper is of great significance. The effects of rotating electromagnetic field on corrosion behavior of T2 copper in 3.5% sodium chloride solution with electrochemical measurements were investigated. The results showed that rotating electromagnetic field changed properties of 3.5% sodium chloride solution by increasing the values of temperature and pH and decreasing the values of conductivity and dissolved oxygen. The rotating electromagnetic field improved the corrosion resistance of T2 copper. The corrosion products of T2 copper in treated 3.5% sodium chloride solution were composed of Cu20 and CuCl. The low corrosion rate of T2 copper was resulted from the decrease of dissolved oxygen in 3.5% sodium chloride solution treated by rotating electromagnetic field.展开更多
Taking simultaneous variations in both particle volume and density into account, the radial mixing and segregation of binary granular bed in a rotating drum half loaded were investigated by a 3D discrete element metho...Taking simultaneous variations in both particle volume and density into account, the radial mixing and segregation of binary granular bed in a rotating drum half loaded were investigated by a 3D discrete element method. Then, based on the competition theory of condensation and percolation, radial segregation due to differences in particle volume and/or density was analyzed. The results show that if either percolation effect induced by volume difference or condensation effect induced by density difference dominates in the active layer of moving bed, separation will occur. Controlling the volume ratio or density ratio of the two types of particles can achieve an equilibrium state between percolation and condensation, and then homogenous mixture can be obtained. When the percolation balances with the condensation, the relationship between volume ratioand density ratiopresents nearly a power function. Scaling up a rotating drum will not affect the mixing degree of the granular bed so long as the volume ratio and density ratio are predefined.展开更多
An innovative physical simulation apparatus, including high speed camera, red thermal imaging system, and mechanical quantity sensor, was used to investigate the friction heat generation and atom diffusion behavior du...An innovative physical simulation apparatus, including high speed camera, red thermal imaging system, and mechanical quantity sensor, was used to investigate the friction heat generation and atom diffusion behavior during Mg-Ti friction welding process. The results show that the friction coefficient mainly experiences two steady stages. The first steady stage corresponds to the Coulomb friction with material abrasion. The second steady stage corresponds to the stick friction with fully plastic flow. Moreover, the increasing rates of axial displacement, temperature and friction coefficient are obviously enhanced with the increase of rotation speed and axial pressure. It can also be found that the there exists rapid diffusion phenomenon in the Mg-Ti friction welding system. The large deformation activated diffusion coefficient is about 105 higher than that activated by thermal.展开更多
基金This project is supported by "Nine five" National Key Project on Basic Research and Applied Research of China (No.PD9521908Z1)Provincial Science and Technology Key Project of Henan (No.20001120323).
文摘Based on the beginning, propagating and ending mechanism of rotating-stallcell, the relation between the pressure history signal and the pressure distribution along rotorcircumference is proposed. The angular velocities of rotating-stall cell propagating are computedfrom time series picked by the pressure probes on a cross section. Self-relation calculatingfiltered the random noise of the pressure history data. The exciting load on rotor is computed byintegral of filtered pressure signal along rotor circumference. By Prohl-Myklestad method, dynamicalequations of rotor system are obtained. The dynamical response of rotor system is resolved by usingMatlab system. Further more, the situation of more than one of stall cells is discussed. Two casesrespectively from the natural gas compressor of some fertilizer plant and the CO_2 compressor ofsome nitrogenous fertilizer plant demonstrate that both methods of calculating the load exerted onrotor by pressure fluctuation and resolving the dynamic response of rotor are available and thecharacteristics of frequency spectrum of rotating stall are correct.
基金Supported by the National Natural Science Foundation of China under Grant No.52271309Natural Science Foundation of Heilongjiang Province of China under Grant No.YQ2022E104.
文摘Blades are important parts of rotating machinery such as marine gas turbines and wind turbines,which are exposed to harsh environments during mechanical operations,including centrifugal loads,aerodynamic forces,or high temperatures.These demanding working conditions considerably influence the dynamic performance of blades.Therefore,because of the challenges posed by blades in complex working environments,in-depth research and optimization are necessary to ensure that blades can operate safely and efficiently,thus guaranteeing the reliability and performance of mechanical systems.Focusing on the vibration analysis of blades in rotating machinery,this paper conducts a comprehensive literature review on the research advancements in vibration modeling and structural optimization of blades under complex operational conditions.First,the paper outlines the development of several modeling theories for rotating blades,including one-dimensional beam theory,two-dimensional plate-shell theory,and three-dimensional solid theory.Second,the research progress in the vibrational analysis of blades under aerodynamic loads,thermal environments,and crack factors is separately discussed.Finally,the developments in rotating blade structural optimization are presented from material optimization and shape optimization perspectives.The methodology and theory of analyzing and optimizing blade vibration characteristics under multifactorial operating conditions are comprehensively outlined,aiming to assist future researchers in proposing more effective and practical approaches for the vibration analysis and optimization of blades.
基金funded by the Postdoctoral Fellowship Program of CPSF(China),grant number GZ20232369.No part of the study(design,data collection,and curation analysis,manuscript preparation or publication)was influenced by the funder.
文摘Background:In China,the policy of rotating teachers between urban and rural schools has been implemented to reduce educational disparities and ensure equitable access to quality education.These teachers face unique professional and emotional challenges during the rotation process,making their emotional labor a critical factor influencing their job performance.This study aimed to explore the relationship between rotating teachers’emotional labor strategies and job performance.Methods:This study conducted a cross-sectional survey among 577 rotating teachers selected through stratified random sampling from primary and secondary schools in Chinese mainland.Date were collected using the Teacher Emotional Labor Scale and the Teacher Job Performance Scale.Latent profile analysis(LPA)was employed to identify distinct categories of emotional labor strategies:indifferent,moderately engaged,naturally invested,proactively adjusted,and emotionally elevated.Results:Teachers in the naturally invested and proactively adjusted types demonstrated relatively higher job performance scores,followed by those in the emotionally elevated type.In contrast,teachers in the indifferent and moderate engagement types exhibited comparatively lower scores(F=25.858,p<0.001,η^(2)=0.153).These findings indicate a practical significance,suggestion that flexible and adaptive use emotional labor strategies is strongly associated with enhanced job performance.Conclusion:This study demonstrates that rotating teachers’job performance differs significantly across distinct emotional labor profiles,with balanced and adaptive emotional regulation emerging as a key determinant of higher performance.By identifying and characterizing individual-centered emotional labor profiles,the study advances understanding of how emotional regulation contributes to teachers’professional effectiveness.These results underscore the importance of providing systematic and personalized support to help rotating teachers develop adaptive emotional regulation skills.Targeted guidance should enable teachers to appropriately express and adjust their emotions,thereby avoiding both excessive and insufficient emotional labor and promoting sustainable professional development.
基金financially supported by the National Natural Science Foundation of China(Grant No.62431006)the Inner Mongolia Major Science and Technology Project(Grant No.2020ZD0024)+2 种基金Local Science and Technology Development Project of the Central Government(Grant Nos.2021ZY0006,2022ZY0011)Natural Science Foundation of Inner Mongolia(Grant No.2024LHMS05046)Inner Mongolia Autonomous Region Key Research and Technological Achievements Transformation Plan Project(Grant No.2023YFHH0063).
文摘Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TENG)that uses mechanical triggering switches(on-off-on)to enhance the instantaneous current pulses during rotation.The rotating-switch in the proposed device addresses the issue of low instantaneous current output in triboelectric nanogenerators while maintaining voltage stability.At a constant rotational speed,the RS-TENG achieves an instantaneous current of 3.2 times that of its nonswitching counterpart,with an 89%reduction in response time.Furthermore,at a wind speed of 2 m·s^(-1),the RS-TENG achieves a wind power density of 10.4 mW·m^(-2)·m^(-1)·s.Additionally,by integrating the RS-TENG with energy management circuits,the nanogenerator can power wireless signal transmitters and temperature sensors,offering a self-sustaining power solution for remote wireless services.This research presents a promising technology for powering electronic devices in energy-scarce environments.
基金support from Basic Research Projects of Higher Education Institutions of Liaoning Province(Key Research Projects)(No.JYTZD2023108)General Project of Liaoning Provincial Department of Education(Nos.LJKMZ20220462 and JYTMS20231199).
文摘In order to solve the issues concerning high hot tearing susceptibility(HTS)of Mg-Al-Ca series alloys,a rotating magnetic field(RMF)was applied during their solidification.The effect of RMF at different excitation current intensities(50 A,100 A,and 150 A)on the solidification and hot tearing behavior of AXJ530(Mg-5Al-3Ca-0.17Sr)alloy was investigated.The results indicated that the HTS of AXJ530 alloy decreased with the increase of excitation current intensity.This aspect can be attributed to significant grain refinement under the action of RMF,which improved the intergranular bonding and relieved the stress concentration.On the other hand,the stirring effect of the electromagnetic force on the melt could break up the developed dendrites and delay the dendrite coherence,as well as optimize the feeding channels and improve the feeding drive of the residual liquid at the end of solidification.Therefore,under the action of RMF,the hot tearing initiation of the alloy was suppressed and the feeding efficiency of the liquid was greatly improved,which led to a noticeable reduction of the HTS of the alloy.Moreover,no significant hot tearing was detected in castings at the excitation current parameters of 150 A and 10 Hz.
基金supported by the Natural Science Foundation of Shanxi Province(202103021224193).
文摘Al/steel bimetallic composites were prepared by compound casting,and the effects of the rotating magnetic field on the interfacial microstructure and shear property of bimetallic composite was investigated.The application of rotating magnetic field refined the grain structure of the Al alloy matrix,changed the eutectic Si morphology from coarse lath to needle-like.The rotating magnetic field improved the temperature field and solute distribution of the Al alloy melt,enriched a layer of Si at the interface,and suppressed the growth of intermetallic compounds,the thickness of the interface layer decreased from 44.9μm to 22.8μm.The interfacial intermetallic compounds consisted ofη-Al_(5)Fe_(2),θ-Al_(13)Fe_(4),τ6-Al_(4.5)FeSi,τ_(5)-Al_(8)Fe_(2)Si andτ_(3)-Al_(2)FeSi,and the addition of the rotating magnetic field did not change phase composition.The rotating magnetic field improved the stress distribution within the interfacial intermetallic compounds,the presence of high-angle grain boundaries retarded crack extension,and the shear strength was enhanced from 31.27±3 MPa to 52.70±4 MPa.This work provides a feasible method for preparing Al/steel bimetallic composite with good bonding property.
基金supported by the National Natural Science Foundation of China (Grant No. 12202204)the Natural Science Foundation of Jiangsu Province (Grant No. BK20220953)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Science and Technology Association's Young Talent Nurturing Program of Jiangsu Province (Grant No. JSTJ-2024-004)
文摘In this study, the three-dimensional non-premixed two-phase kerosene/air rotating detonation engines with different isolator configurations and throat area ratios are simulated by the Eulerian-Lagrangian method. The effects of the divergence, straight, and convergence isolators on the rotating detonation wave dynamics and the upstream oblique shock wave propagation mechanism are analyzed. The differences in the rotating detonation wave behaviors between ground and flight operations are clarified.The results indicate that the propagation regimes of the upstream oblique shock wave depend on the isolator configurations and operation conditions. With a divergence isolator, the airflow is accelerated throughout the isolator and divergence section, leading to a maximum Mach number(~1.8) before the normal shock. The total pressure loss reaches the largest, and the detonation pressure drops. The upstream oblique shock wave can be suppressed within the divergence section with the divergence isolator.However, for the straight and convergence isolators, the airflow in the isolator with a larger ψ_(1)(0.3 and0.4) can suffer from the disturbance of the upstream oblique shock wave. The critical incident angle is around 39° at ground operation conditions. The upstream oblique shock wave tends to be suppressed when the engine operates under flight operation conditions. The critical pressure ratio β_(cr0) is found to be able to help in distinguishing the propagation regimes of the upstream oblique shock wave. Slightly below or above the β_(cr0) can obtain different marginal propagation results. The high-speed airflow in the divergence section affects the fuel droplet penetration distance, which deteriorates the reactant mixing and the detonation area. Significant detonation velocity deficits are observed and the maximum velocity deficit reaches 26%. The results indicate the engine channel design should adopt different isolator configurations based on the purpose of total pressure loss or disturbance suppression. This study can provide useful guidance for the channel design of a more complete two-phase rotating detonation engine.
基金supported by the National Natural Science Foundation of China(22288102)。
文摘The large molecular weight and high hydrophilicity of chloramphenicol(CAP) residuals in wastewater led to severe degradation difficulty,which propelled the development of new wastewater degradation processes and reactors based on process intensification.This study enhanced the CAP degradation by ozone/peroxydisulfate(PDS) advanced oxidation process in a submerged rotating packed bed(SRPB)reactor.Compared the usage of different oxidants,it was indicated that the combination of O_(3) and PDS exhibited a higher degradation efficiency than ozone and PDS alone.The more desired degradation efficiency could be achieved at the operating conditions of ascending PDS concentration,SRPB rotational speed,ozone concentration,reduced initial CAP concentration,and the water qualities of ascended pH,lower Cl^(-)and initial CO_(3)^(2-) concentrations.Under the optimized conditions of C_(CAP)=20 mg·L^(-1),C_(O3)=30 mg·L^(-1),C_(PDS)=100 mg·L^(-1),and N=400 r·min^(-1),and water qualities of pH=10,the maximum chloramphenicol degradation efficiency of 97% and kinetic constant of 0.23 min^(-1) were achieved after treating 16 min.A comparison of the results with previously reported advanced oxidation processes of CAP indicated that the enhanced O^(3)/PDS advanced oxidation system using the SRPB can significantly improve the degradation efficiency of CAP.
基金support of the Natural Science Foundation of China(Nos.U23A20611 and 52071050)the Innovation and Entrepreneurship of High-level Talents Project of Dalian(No.2020RD07)the Science and Technology Innovation Project of Ningbo(No.2024Z077).
文摘Phosphor bronze is a commonly used elastic copper alloy,widely applied in electronic connectors and terminals[1-4].With the rapid development of 5 G mobile communication technology and the new energy vehicle industry,the size requirements for connectors have been reduced,while the demand for strength has gradually increased[5].This requires the alloy to possess higher strength and better deformability.
基金supported by the National Key Research and Development Plan of China(No.2023YFB3406500)the National Natural Science Foundation of China(No.52475132)+2 种基金the Aeronautical Science Foundation of China(No.20200015053001)the Shaanxi Key Research Program Project,China(No.2024GX-ZDCYL-01–16)the Xi’an Key Industrial Chain Technology Research Project,China(No.2023JH-RGZNGG-0033)。
文摘Traditional beamforming techniques may not accurately locate sources in scenarios with both stationary and rotating sound sources.The existence of rotating sound sources can cause blurring in the stationary beamforming map.Current algorithms for separating different moving sound sources have limited effectiveness,leading to significant residual noise,especially when the rotating source is strong enough to mask stationary sources completely.To overcome these challenges,a novel solution utilizing a virtual rotating array in the modal domain combined with robust principal component analysis is proposed to separate sound sources with different rotational speeds.This approach,named Robust Principal Component Analysis in the Modal domain(RPCA-M),investigates the performance of convex nuclear norm and non-convex Schatten-p norm to distinguish stationary and rotating sources.By comparing the errors in Cross-Spectral Matrix(CSM)recovery and acoustic imaging across different algorithms,the effectiveness of RPCA-M in separating stationary and moving sound sources is demonstrated.Importantly,this method effectively separates sound sources,even when there are significant variations in their amplitudes at different rotation speeds.
基金supported by the National Natural Science Foundation of China(U22B20127)the National Natural Science Foundation of China(52175305)Taishan Scholars Project(tstp20230618).
文摘A high-quality welding method,named plasma arc welding apparatus with rotating tungsten electrode(abbreviated as PAW-RT),was proposed in this paper.The rotation speed could be adjusted from 0 to 15000 r/min.The rotary motion of the tungsten needle trans-ferred circumferential momentum to the arc as well as the molten pool,thereby conferring the latter with rotating fluid flow charac-teristics.The influences of tungsten electrode rotation speed on PAW arc morphology,weld formation and interfacial microstructure of the final weld joints were discussed by the experimental procedures involving in-situ ablation,surfacing and butt welding.The ex-periments were conducted on Q235B steel.The results indicated that the increase of tungsten electrode rotation speed in PAW-RT contributed to improving arc eccentricity,leading to aesthetically improved welds with more uniformity.Additionally,the strength,hardness and toughness of the welded joint increased,while porosity was reduced.
基金funded by the European Union’s Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Grant Agreement(Grant No.101026104)by the National Natural Science Foundation of China(Grant No.U20A6004)in part by the State Key Laboratory of Precision Electronics Manufacturing Technology and Equipment(Grant No.JMDZ202314).
文摘In semiconductor precision packaging and other applications involving alignment of automated equipment,the nonlinear motion caused by structural characteristics and friction effects on torque-type rotating motion stages seriously affects output accuracy and stability.To solve this problem,the motion characteristics of a rotating stage and the mechanism by which friction nonlinearity influences accuracy are analyzed in detail.In addition,a compound control strategy based on a kinematic model and the Stribeck friction model is designed.A friction disturbance observer based on output position feedback is improved for simple parameter tuning.Finally,an experimental system is constructed to carry out validation tests,including identification of nonlinear characteristics and performance comparisons.The experimental results show that the linear tracking error of the torque-type rotating stage is less than 1.47µm after adoption of the proposed model-based composite control strategy,and the corresponding rotary angle deviation is less than 0.0153°.The linearity of output motion is increased to 97.59%and the error compensation effect is improved by 51.6%compared with the PID control method.The experimental results confirm that the analysis method adopted here and the proposed compensation strategy can effectively reduce frictional nonlinearity and improve motion accuracy.The proposed method can also be applied to other precision electromechanical systems.
文摘Objective:To observe the therapeutic effect of Moist Burn Ointment combined with rotating moxibustion on patients with pressure ulcers and deficiency of both Qi and blood.Methods:40 patients with pressure ulcers and deficiency of both Qi and blood were randomly divided into two groups from July 2024 to November 2025.Group A received Moist Burn Ointment combined with rotating moxibustion,while Group B received Moist Burn Ointment only.Results:Group A showed better efficacy,wound healing time,dressing change frequency,satisfaction,PUSH score,and adverse reaction indicators compared to Group B(P<0.05).Conclusion:The combination of Moist Burn Ointment and rotating moxibustion in the treatment of patients with pressure ulcers and deficiency of both Qi and blood can shorten wound healing time,reduce dressing change frequency,and alleviate the degree of pressure ulcers,which is safe and efficient.
基金supports of the National Natural Science Foundation of China(Nos.52076129,92360308,52376027)the Shanghai Municipal Education Commission of China(No.2023-02-4)+1 种基金the Fundamental Research Funds for the Central Universities of Chinathe United Innovation Center(UIC)of Aerothermal Technologies for Turbomachinery of China.
文摘Rotating Instability (RI) is a typical unsteady flow phenomenon in compressors and may cause severe aerodynamic noise and even potential nonsynchronous vibration. Most studies of RI are based on the uniform inflow, ignoring the influence of inlet distortions. This study investigates the mechanism of RI in a transonic rotor through full-annulus unsteady simulations, with a particular focus on the effects of boundary layer ingesting distortions. The results show that at the uniform inflow, the RI fluctuations with the broadband hump can be observed over a relatively wide mass flow rate range, and its origin can be attributed to the coupling effect between the tip leakage flow and shear layer instability. At the inlet distortions, the broadband hump only occurs with partial circumferential locations. This kind of flow phenomenon is defined as Partial Rotating Instability (PRI). The PRI only occurs in a narrower mass flow rate range in which the circumferential range of strong shear is sufficiently large and the self-induced unsteady effects are strong enough. Further, this study confirms that the averaged tip leakage flow axial momentum at the onset of RI or PRI is close, so it can be used as the parameter to determine whether RI or PRI occurs.
文摘A theoretical analysis regarding active vibration control of rotating machines with current-controlled electrodynamic actuators between machine feet and steel frame foundation and with velocity feedback of the machine feet vibrations is presented.First,a generalized mathematical formulation is derived based on a state-space description which can be used for different kinds of models(1D,2D,and 3D models).It is shown that under special boundary conditions,the control parameters can be directly implemented into the stiffness and damping matrices of the system.Based on the generalized mathematical formulation,an example of a rotating machine—described by a 2D model—with journal bearings,flexible rotor,current-controlled electrodynamic actuators,steel frame foundation,and velocity feedback of the machine feet vibrations is presented where the effectiveness of the described active vibration control system is demonstrated.
基金supported by the National Natural Science Foundation of China(No.12172029)the open Resarch Project of Key Laboratory of Icing and Anti/De-icing of CARDC(No.IADL 20230101)。
文摘The icing of areo-engine inlet components during flight can affect engine operational safety.Conventional hot-air anti-icing systems require a large amount of bleed air,which compromises engine performance.Consequently,low-energy anti/de-icing methods based on superhydrophobic surfaces have attracted widespread attention.Previous studies have demonstrated that for stationary components,superhydrophobic surfaces can significantly reduce anti-icing energy consumption by altering the flow behavior of runback water.However,for rotating inlet components of aero-engines,the effectiveness of superhydrophobic surfaces and the influence of surface wettability on the evolution of runback water flow remain unclear due to the effects of centrifugal and Coriolis forces.This study establishes a 3D liquid water flow simulation model using the volume of fluid(VOF)method to investigate the effects of rotational speed,airflow velocity,and surface wettability on the runback water flow behavior over the rotating spinner under dynamic rotation conditions.The results show that the rotational effects and surface wettability mutually reinforce one another.Specifically,increasing the rotational speed and contact angle can both enhance the flow velocity of liquid water and accelerate the breakup and rupture of liquid film,leading to the formation of rivulets,droplets,and subsequent detachment from the surface.A theoretical model based on force balance is proposed to describe the evolution of runback water flow,and the analysis reveals that as the rotational speed and contact angle increase,the water film is more likely to break up to form rivulets and beads,and the critical radius for droplet detachment from the surface decreases,making it easier removal from the surface.
基金Project supported by the National Natural Science Foundation of China(No.12372263)。
文摘Two-dimensional(2D)direct numerical simulations on the dynamics of three identical ferrofluid droplets suspended in a non-magnetic ambient fluid under a rotating uniform magnetic field are conducted,and the motion and deformation of the three ferrofluid droplets are studied in this paper.Results show that there are four modes(i.e.,the three droplets'direct coalescence(TC),the coalescence of two droplets and the subsequent planetary motion with the third droplet(CAP),the three droplets'planetary motion(TP),and the independent spin(IS))for the three ferrofluid droplets,dependent on the magnetic Bond number(Bom)and the initial distance(d0)between two of the droplets.It is found that the decrease in d0and the increase in Bomcan make the droplets'mode change from the IS to the planetary motion,and then turn to the CAP.Furthermore,reducing Bomor d0is helpful for the droplets to become merged.
基金Projects(51207031,51177022)supported by the National Natural Science Foundation of ChinaProject(2013M541368)supported by the China Postdoctoral Science Foundation+1 种基金Project(BS2011NJ002)supported by the Promotive Research Fund for Excellent Young and Middle-Aged Scientists of Shandong Province,ChinaProject(2008DFR60340)supported by the International Science and Technology Cooperation of China
文摘Copper is susceptible to producing corrosion problems in corrosive environments, which leads to serious safety problems. Thus, investigating the corrosion behavior of copper is of great significance. The effects of rotating electromagnetic field on corrosion behavior of T2 copper in 3.5% sodium chloride solution with electrochemical measurements were investigated. The results showed that rotating electromagnetic field changed properties of 3.5% sodium chloride solution by increasing the values of temperature and pH and decreasing the values of conductivity and dissolved oxygen. The rotating electromagnetic field improved the corrosion resistance of T2 copper. The corrosion products of T2 copper in treated 3.5% sodium chloride solution were composed of Cu20 and CuCl. The low corrosion rate of T2 copper was resulted from the decrease of dissolved oxygen in 3.5% sodium chloride solution treated by rotating electromagnetic field.
基金Projects(5137424151275531)supported by the National Natural Science Foundation of ChinaProject(CX2014B059)supported by the Innovation Foundation for Postgraduate of Hunan Province,China
文摘Taking simultaneous variations in both particle volume and density into account, the radial mixing and segregation of binary granular bed in a rotating drum half loaded were investigated by a 3D discrete element method. Then, based on the competition theory of condensation and percolation, radial segregation due to differences in particle volume and/or density was analyzed. The results show that if either percolation effect induced by volume difference or condensation effect induced by density difference dominates in the active layer of moving bed, separation will occur. Controlling the volume ratio or density ratio of the two types of particles can achieve an equilibrium state between percolation and condensation, and then homogenous mixture can be obtained. When the percolation balances with the condensation, the relationship between volume ratioand density ratiopresents nearly a power function. Scaling up a rotating drum will not affect the mixing degree of the granular bed so long as the volume ratio and density ratio are predefined.
基金Projects (51101126, 51071123) supported by the National Natural Science Foundation of ChinaProjects (20110491684, 2012T50817) supported by the China Postdoctoral Science FoundationProject (20110942K) supported by the Open Fund of State Key Laboratory of Powder Metallurgy of Central South University, China
文摘An innovative physical simulation apparatus, including high speed camera, red thermal imaging system, and mechanical quantity sensor, was used to investigate the friction heat generation and atom diffusion behavior during Mg-Ti friction welding process. The results show that the friction coefficient mainly experiences two steady stages. The first steady stage corresponds to the Coulomb friction with material abrasion. The second steady stage corresponds to the stick friction with fully plastic flow. Moreover, the increasing rates of axial displacement, temperature and friction coefficient are obviously enhanced with the increase of rotation speed and axial pressure. It can also be found that the there exists rapid diffusion phenomenon in the Mg-Ti friction welding system. The large deformation activated diffusion coefficient is about 105 higher than that activated by thermal.
